perf_counter: Rework the perf counter disable/enable
[linux-2.6] / arch / powerpc / kernel / Makefile
1 #
2 # Makefile for the linux kernel.
3 #
4
5 CFLAGS_ptrace.o         += -DUTS_MACHINE='"$(UTS_MACHINE)"'
6
7 ifeq ($(CONFIG_PPC64),y)
8 CFLAGS_prom_init.o      += -mno-minimal-toc
9 endif
10 ifeq ($(CONFIG_PPC32),y)
11 CFLAGS_prom_init.o      += -fPIC
12 CFLAGS_btext.o          += -fPIC
13 endif
14
15 ifdef CONFIG_FUNCTION_TRACER
16 # Do not trace early boot code
17 CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
18 CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
19 CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
20 CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
21 # do not trace tracer code
22 CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
23 # timers used by tracing
24 CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
25 endif
26
27 obj-y                           := cputable.o ptrace.o syscalls.o \
28                                    irq.o align.o signal_32.o pmc.o vdso.o \
29                                    init_task.o process.o systbl.o idle.o \
30                                    signal.o sysfs.o cacheinfo.o
31 obj-y                           += vdso32/
32 obj-$(CONFIG_PPC64)             += setup_64.o sys_ppc32.o \
33                                    signal_64.o ptrace32.o \
34                                    paca.o cpu_setup_ppc970.o \
35                                    cpu_setup_pa6t.o \
36                                    firmware.o nvram_64.o
37 obj64-$(CONFIG_RELOCATABLE)     += reloc_64.o
38 obj-$(CONFIG_PPC64)             += vdso64/
39 obj-$(CONFIG_ALTIVEC)           += vecemu.o vector.o
40 obj-$(CONFIG_PPC_970_NAP)       += idle_power4.o
41 obj-$(CONFIG_PPC_OF)            += of_device.o of_platform.o prom_parse.o
42 obj-$(CONFIG_PPC_CLOCK)         += clock.o
43 procfs-$(CONFIG_PPC64)          := proc_ppc64.o
44 obj-$(CONFIG_PROC_FS)           += $(procfs-y)
45 rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)   := rtas_pci.o
46 obj-$(CONFIG_PPC_RTAS)          += rtas.o rtas-rtc.o $(rtaspci-y-y)
47 obj-$(CONFIG_RTAS_FLASH)        += rtas_flash.o
48 obj-$(CONFIG_RTAS_PROC)         += rtas-proc.o
49 obj-$(CONFIG_LPARCFG)           += lparcfg.o
50 obj-$(CONFIG_IBMVIO)            += vio.o
51 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
52 obj-$(CONFIG_GENERIC_TBSYNC)    += smp-tbsync.o
53 obj-$(CONFIG_CRASH_DUMP)        += crash_dump.o
54 obj-$(CONFIG_E500)              += idle_e500.o
55 obj-$(CONFIG_6xx)               += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
56 obj-$(CONFIG_TAU)               += tau_6xx.o
57 obj-$(CONFIG_HIBERNATION)       += swsusp.o suspend.o \
58                                    swsusp_$(CONFIG_WORD_SIZE).o
59 obj64-$(CONFIG_HIBERNATION)     += swsusp_asm64.o
60 obj-$(CONFIG_MODULES)           += module.o module_$(CONFIG_WORD_SIZE).o
61 obj-$(CONFIG_44x)               += cpu_setup_44x.o
62 obj-$(CONFIG_FSL_BOOKE)         += cpu_setup_fsl_booke.o dbell.o
63
64 extra-$(CONFIG_PPC_STD_MMU)     := head_32.o
65 extra-$(CONFIG_PPC64)           := head_64.o
66 extra-$(CONFIG_40x)             := head_40x.o
67 extra-$(CONFIG_44x)             := head_44x.o
68 extra-$(CONFIG_FSL_BOOKE)       := head_fsl_booke.o
69 extra-$(CONFIG_8xx)             := head_8xx.o
70 extra-y                         += vmlinux.lds
71
72 obj-y                           += time.o prom.o traps.o setup-common.o \
73                                    udbg.o misc.o io.o dma.o \
74                                    misc_$(CONFIG_WORD_SIZE).o
75 obj-$(CONFIG_PPC32)             += entry_32.o setup_32.o
76 obj-$(CONFIG_PPC64)             += dma-iommu.o iommu.o
77 obj-$(CONFIG_KGDB)              += kgdb.o
78 obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE)    += prom_init.o
79 obj-$(CONFIG_MODULES)           += ppc_ksyms.o
80 obj-$(CONFIG_BOOTX_TEXT)        += btext.o
81 obj-$(CONFIG_SMP)               += smp.o
82 obj-$(CONFIG_KPROBES)           += kprobes.o
83 obj-$(CONFIG_PPC_UDBG_16550)    += legacy_serial.o udbg_16550.o
84 obj-$(CONFIG_STACKTRACE)        += stacktrace.o
85
86 pci64-$(CONFIG_PPC64)           += pci_dn.o isa-bridge.o
87 obj-$(CONFIG_PCI)               += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
88                                    pci-common.o
89 obj-$(CONFIG_PCI_MSI)           += msi.o
90 obj-$(CONFIG_KEXEC)             += machine_kexec.o crash.o \
91                                    machine_kexec_$(CONFIG_WORD_SIZE).o
92 obj-$(CONFIG_AUDIT)             += audit.o
93 obj64-$(CONFIG_AUDIT)           += compat_audit.o
94
95 obj-$(CONFIG_DYNAMIC_FTRACE)    += ftrace.o
96 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)     += ftrace.o
97 obj-$(CONFIG_PERF_COUNTERS)     += perf_counter.o power4-pmu.o ppc970-pmu.o \
98                                    power5-pmu.o power5+-pmu.o power6-pmu.o
99
100 obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
101
102 ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
103 obj-y                           += iomap.o
104 endif
105
106 obj-$(CONFIG_PPC64)             += $(obj64-y)
107
108 ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
109 obj-y                           += ppc_save_regs.o
110 endif
111
112 extra-$(CONFIG_PPC_FPU)         += fpu.o
113 extra-$(CONFIG_PPC64)           += entry_64.o
114
115 extra-y                         += systbl_chk.i
116 $(obj)/systbl.o:                systbl_chk
117
118 quiet_cmd_systbl_chk = CALL    $<
119       cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
120
121 PHONY += systbl_chk
122 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
123         $(call cmd,systbl_chk)
124
125 $(obj)/built-in.o:              prom_init_check
126
127 quiet_cmd_prom_init_check = CALL    $<
128       cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
129
130 PHONY += prom_init_check
131 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
132         $(call cmd,prom_init_check)
133
134 clean-files := vmlinux.lds