Merge branch 'upstream'
[linux-2.6] / drivers / hwmon / w83781d.c
1 /*
2     w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
3                 monitoring
4     Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>,
5     Philip Edelbrock <phil@netroedge.com>,
6     and Mark Studebaker <mdsxyz123@yahoo.com>
7
8     This program is free software; you can redistribute it and/or modify
9     it under the terms of the GNU General Public License as published by
10     the Free Software Foundation; either version 2 of the License, or
11     (at your option) any later version.
12
13     This program is distributed in the hope that it will be useful,
14     but WITHOUT ANY WARRANTY; without even the implied warranty of
15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16     GNU General Public License for more details.
17
18     You should have received a copy of the GNU General Public License
19     along with this program; if not, write to the Free Software
20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23 /*
24     Supports following chips:
25
26     Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
27     as99127f    7       3       0       3       0x31    0x12c3  yes     no
28     as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
29     w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
30     w83627hf    9       3       2       3       0x21    0x5ca3  yes     yes(LPC)
31     w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
32     w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
33
34 */
35
36 #include <linux/module.h>
37 #include <linux/init.h>
38 #include <linux/slab.h>
39 #include <linux/jiffies.h>
40 #include <linux/i2c.h>
41 #include <linux/i2c-isa.h>
42 #include <linux/hwmon.h>
43 #include <linux/hwmon-vid.h>
44 #include <linux/err.h>
45 #include <linux/mutex.h>
46 #include <asm/io.h>
47 #include "lm75.h"
48
49 /* Addresses to scan */
50 static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
51                                         0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
52                                         0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
53 static unsigned short isa_address = 0x290;
54
55 /* Insmod parameters */
56 I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
57 I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
58                     "{bus, clientaddr, subclientaddr1, subclientaddr2}");
59
60 static int reset;
61 module_param(reset, bool, 0);
62 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
63
64 static int init = 1;
65 module_param(init, bool, 0);
66 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
67
68 /* Constants specified below */
69
70 /* Length of ISA address segment */
71 #define W83781D_EXTENT                  8
72
73 /* Where are the ISA address/data registers relative to the base address */
74 #define W83781D_ADDR_REG_OFFSET         5
75 #define W83781D_DATA_REG_OFFSET         6
76
77 /* The W83781D registers */
78 /* The W83782D registers for nr=7,8 are in bank 5 */
79 #define W83781D_REG_IN_MAX(nr)          ((nr < 7) ? (0x2b + (nr) * 2) : \
80                                                     (0x554 + (((nr) - 7) * 2)))
81 #define W83781D_REG_IN_MIN(nr)          ((nr < 7) ? (0x2c + (nr) * 2) : \
82                                                     (0x555 + (((nr) - 7) * 2)))
83 #define W83781D_REG_IN(nr)              ((nr < 7) ? (0x20 + (nr)) : \
84                                                     (0x550 + (nr) - 7))
85
86 #define W83781D_REG_FAN_MIN(nr)         (0x3a + (nr))
87 #define W83781D_REG_FAN(nr)             (0x27 + (nr))
88
89 #define W83781D_REG_BANK                0x4E
90 #define W83781D_REG_TEMP2_CONFIG        0x152
91 #define W83781D_REG_TEMP3_CONFIG        0x252
92 #define W83781D_REG_TEMP(nr)            ((nr == 3) ? (0x0250) : \
93                                         ((nr == 2) ? (0x0150) : \
94                                                      (0x27)))
95 #define W83781D_REG_TEMP_HYST(nr)       ((nr == 3) ? (0x253) : \
96                                         ((nr == 2) ? (0x153) : \
97                                                      (0x3A)))
98 #define W83781D_REG_TEMP_OVER(nr)       ((nr == 3) ? (0x255) : \
99                                         ((nr == 2) ? (0x155) : \
100                                                      (0x39)))
101
102 #define W83781D_REG_CONFIG              0x40
103
104 /* Interrupt status (W83781D, AS99127F) */
105 #define W83781D_REG_ALARM1              0x41
106 #define W83781D_REG_ALARM2              0x42
107
108 /* Real-time status (W83782D, W83783S, W83627HF) */
109 #define W83782D_REG_ALARM1              0x459
110 #define W83782D_REG_ALARM2              0x45A
111 #define W83782D_REG_ALARM3              0x45B
112
113 #define W83781D_REG_BEEP_CONFIG         0x4D
114 #define W83781D_REG_BEEP_INTS1          0x56
115 #define W83781D_REG_BEEP_INTS2          0x57
116 #define W83781D_REG_BEEP_INTS3          0x453   /* not on W83781D */
117
118 #define W83781D_REG_VID_FANDIV          0x47
119
120 #define W83781D_REG_CHIPID              0x49
121 #define W83781D_REG_WCHIPID             0x58
122 #define W83781D_REG_CHIPMAN             0x4F
123 #define W83781D_REG_PIN                 0x4B
124
125 /* 782D/783S only */
126 #define W83781D_REG_VBAT                0x5D
127
128 /* PWM 782D (1-4) and 783S (1-2) only */
129 #define W83781D_REG_PWM1                0x5B    /* 782d and 783s/627hf datasheets disagree */
130                                                 /* on which is which; */
131 #define W83781D_REG_PWM2                0x5A    /* We follow the 782d convention here, */
132                                                 /* However 782d is probably wrong. */
133 #define W83781D_REG_PWM3                0x5E
134 #define W83781D_REG_PWM4                0x5F
135 #define W83781D_REG_PWMCLK12            0x5C
136 #define W83781D_REG_PWMCLK34            0x45C
137 static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
138         W83781D_REG_PWM3, W83781D_REG_PWM4
139 };
140
141 #define W83781D_REG_PWM(nr)             (regpwm[(nr) - 1])
142
143 #define W83781D_REG_I2C_ADDR            0x48
144 #define W83781D_REG_I2C_SUBADDR         0x4A
145
146 /* The following are undocumented in the data sheets however we
147    received the information in an email from Winbond tech support */
148 /* Sensor selection - not on 781d */
149 #define W83781D_REG_SCFG1               0x5D
150 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
151
152 #define W83781D_REG_SCFG2               0x59
153 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
154
155 #define W83781D_DEFAULT_BETA            3435
156
157 /* RT Table registers */
158 #define W83781D_REG_RT_IDX              0x50
159 #define W83781D_REG_RT_VAL              0x51
160
161 /* Conversions. Rounding and limit checking is only done on the TO_REG
162    variants. Note that you should be a bit careful with which arguments
163    these macros are called: arguments may be evaluated more than once.
164    Fixing this is just not worth it. */
165 #define IN_TO_REG(val)                  (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
166 #define IN_FROM_REG(val)                (((val) * 16) / 10)
167
168 static inline u8
169 FAN_TO_REG(long rpm, int div)
170 {
171         if (rpm == 0)
172                 return 255;
173         rpm = SENSORS_LIMIT(rpm, 1, 1000000);
174         return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
175 }
176
177 #define FAN_FROM_REG(val,div)           ((val) == 0   ? -1 : \
178                                         ((val) == 255 ? 0 : \
179                                                         1350000 / ((val) * (div))))
180
181 #define TEMP_TO_REG(val)                (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
182                                                 : (val)) / 1000, 0, 0xff))
183 #define TEMP_FROM_REG(val)              (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
184
185 #define PWM_FROM_REG(val)               (val)
186 #define PWM_TO_REG(val)                 (SENSORS_LIMIT((val),0,255))
187 #define BEEP_MASK_FROM_REG(val,type)    ((type) == as99127f ? \
188                                          (val) ^ 0x7fff : (val))
189 #define BEEP_MASK_TO_REG(val,type)      ((type) == as99127f ? \
190                                          (~(val)) & 0x7fff : (val) & 0xffffff)
191
192 #define BEEP_ENABLE_TO_REG(val)         ((val) ? 1 : 0)
193 #define BEEP_ENABLE_FROM_REG(val)       ((val) ? 1 : 0)
194
195 #define DIV_FROM_REG(val)               (1 << (val))
196
197 static inline u8
198 DIV_TO_REG(long val, enum chips type)
199 {
200         int i;
201         val = SENSORS_LIMIT(val, 1,
202                             ((type == w83781d
203                               || type == as99127f) ? 8 : 128)) >> 1;
204         for (i = 0; i < 7; i++) {
205                 if (val == 0)
206                         break;
207                 val >>= 1;
208         }
209         return ((u8) i);
210 }
211
212 /* There are some complications in a module like this. First off, W83781D chips
213    may be both present on the SMBus and the ISA bus, and we have to handle
214    those cases separately at some places. Second, there might be several
215    W83781D chips available (well, actually, that is probably never done; but
216    it is a clean illustration of how to handle a case like that). Finally,
217    a specific chip may be attached to *both* ISA and SMBus, and we would
218    not like to detect it double. Fortunately, in the case of the W83781D at
219    least, a register tells us what SMBus address we are on, so that helps
220    a bit - except if there could be more than one SMBus. Groan. No solution
221    for this yet. */
222
223 /* This module may seem overly long and complicated. In fact, it is not so
224    bad. Quite a lot of bookkeeping is done. A real driver can often cut
225    some corners. */
226
227 /* For each registered W83781D, we need to keep some data in memory. That
228    data is pointed to by w83781d_list[NR]->data. The structure itself is
229    dynamically allocated, at the same time when a new w83781d client is
230    allocated. */
231 struct w83781d_data {
232         struct i2c_client client;
233         struct class_device *class_dev;
234         struct mutex lock;
235         enum chips type;
236
237         struct mutex update_lock;
238         char valid;             /* !=0 if following fields are valid */
239         unsigned long last_updated;     /* In jiffies */
240
241         struct i2c_client *lm75[2];     /* for secondary I2C addresses */
242         /* array of 2 pointers to subclients */
243
244         u8 in[9];               /* Register value - 8 & 9 for 782D only */
245         u8 in_max[9];           /* Register value - 8 & 9 for 782D only */
246         u8 in_min[9];           /* Register value - 8 & 9 for 782D only */
247         u8 fan[3];              /* Register value */
248         u8 fan_min[3];          /* Register value */
249         u8 temp;
250         u8 temp_max;            /* Register value */
251         u8 temp_max_hyst;       /* Register value */
252         u16 temp_add[2];        /* Register value */
253         u16 temp_max_add[2];    /* Register value */
254         u16 temp_max_hyst_add[2];       /* Register value */
255         u8 fan_div[3];          /* Register encoding, shifted right */
256         u8 vid;                 /* Register encoding, combined */
257         u32 alarms;             /* Register encoding, combined */
258         u32 beep_mask;          /* Register encoding, combined */
259         u8 beep_enable;         /* Boolean */
260         u8 pwm[4];              /* Register value */
261         u8 pwmenable[4];        /* Boolean */
262         u16 sens[3];            /* 782D/783S only.
263                                    1 = pentium diode; 2 = 3904 diode;
264                                    3000-5000 = thermistor beta.
265                                    Default = 3435. 
266                                    Other Betas unimplemented */
267         u8 vrm;
268 };
269
270 static int w83781d_attach_adapter(struct i2c_adapter *adapter);
271 static int w83781d_isa_attach_adapter(struct i2c_adapter *adapter);
272 static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
273 static int w83781d_detach_client(struct i2c_client *client);
274
275 static int w83781d_read_value(struct i2c_client *client, u16 reg);
276 static int w83781d_write_value(struct i2c_client *client, u16 reg, u16 value);
277 static struct w83781d_data *w83781d_update_device(struct device *dev);
278 static void w83781d_init_client(struct i2c_client *client);
279
280 static struct i2c_driver w83781d_driver = {
281         .driver = {
282                 .name = "w83781d",
283         },
284         .id = I2C_DRIVERID_W83781D,
285         .attach_adapter = w83781d_attach_adapter,
286         .detach_client = w83781d_detach_client,
287 };
288
289 static struct i2c_driver w83781d_isa_driver = {
290         .driver = {
291                 .name = "w83781d-isa",
292         },
293         .attach_adapter = w83781d_isa_attach_adapter,
294         .detach_client = w83781d_detach_client,
295 };
296
297
298 /* following are the sysfs callback functions */
299 #define show_in_reg(reg) \
300 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
301 { \
302         struct w83781d_data *data = w83781d_update_device(dev); \
303         return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \
304 }
305 show_in_reg(in);
306 show_in_reg(in_min);
307 show_in_reg(in_max);
308
309 #define store_in_reg(REG, reg) \
310 static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
311 { \
312         struct i2c_client *client = to_i2c_client(dev); \
313         struct w83781d_data *data = i2c_get_clientdata(client); \
314         u32 val; \
315          \
316         val = simple_strtoul(buf, NULL, 10) / 10; \
317          \
318         mutex_lock(&data->update_lock); \
319         data->in_##reg[nr] = IN_TO_REG(val); \
320         w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
321          \
322         mutex_unlock(&data->update_lock); \
323         return count; \
324 }
325 store_in_reg(MIN, min);
326 store_in_reg(MAX, max);
327
328 #define sysfs_in_offset(offset) \
329 static ssize_t \
330 show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
331 { \
332         return show_in(dev, buf, offset); \
333 } \
334 static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
335
336 #define sysfs_in_reg_offset(reg, offset) \
337 static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
338 { \
339         return show_in_##reg (dev, buf, offset); \
340 } \
341 static ssize_t store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
342 { \
343         return store_in_##reg (dev, buf, count, offset); \
344 } \
345 static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset);
346
347 #define sysfs_in_offsets(offset) \
348 sysfs_in_offset(offset); \
349 sysfs_in_reg_offset(min, offset); \
350 sysfs_in_reg_offset(max, offset);
351
352 sysfs_in_offsets(0);
353 sysfs_in_offsets(1);
354 sysfs_in_offsets(2);
355 sysfs_in_offsets(3);
356 sysfs_in_offsets(4);
357 sysfs_in_offsets(5);
358 sysfs_in_offsets(6);
359 sysfs_in_offsets(7);
360 sysfs_in_offsets(8);
361
362 #define device_create_file_in(client, offset) \
363 do { \
364 device_create_file(&client->dev, &dev_attr_in##offset##_input); \
365 device_create_file(&client->dev, &dev_attr_in##offset##_min); \
366 device_create_file(&client->dev, &dev_attr_in##offset##_max); \
367 } while (0)
368
369 #define show_fan_reg(reg) \
370 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
371 { \
372         struct w83781d_data *data = w83781d_update_device(dev); \
373         return sprintf(buf,"%ld\n", \
374                 FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
375 }
376 show_fan_reg(fan);
377 show_fan_reg(fan_min);
378
379 static ssize_t
380 store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
381 {
382         struct i2c_client *client = to_i2c_client(dev);
383         struct w83781d_data *data = i2c_get_clientdata(client);
384         u32 val;
385
386         val = simple_strtoul(buf, NULL, 10);
387
388         mutex_lock(&data->update_lock);
389         data->fan_min[nr - 1] =
390             FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
391         w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
392                             data->fan_min[nr - 1]);
393
394         mutex_unlock(&data->update_lock);
395         return count;
396 }
397
398 #define sysfs_fan_offset(offset) \
399 static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
400 { \
401         return show_fan(dev, buf, offset); \
402 } \
403 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
404
405 #define sysfs_fan_min_offset(offset) \
406 static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \
407 { \
408         return show_fan_min(dev, buf, offset); \
409 } \
410 static ssize_t store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
411 { \
412         return store_fan_min(dev, buf, count, offset); \
413 } \
414 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset);
415
416 sysfs_fan_offset(1);
417 sysfs_fan_min_offset(1);
418 sysfs_fan_offset(2);
419 sysfs_fan_min_offset(2);
420 sysfs_fan_offset(3);
421 sysfs_fan_min_offset(3);
422
423 #define device_create_file_fan(client, offset) \
424 do { \
425 device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
426 device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
427 } while (0)
428
429 #define show_temp_reg(reg) \
430 static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
431 { \
432         struct w83781d_data *data = w83781d_update_device(dev); \
433         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
434                 return sprintf(buf,"%d\n", \
435                         LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
436         } else {        /* TEMP1 */ \
437                 return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
438         } \
439 }
440 show_temp_reg(temp);
441 show_temp_reg(temp_max);
442 show_temp_reg(temp_max_hyst);
443
444 #define store_temp_reg(REG, reg) \
445 static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
446 { \
447         struct i2c_client *client = to_i2c_client(dev); \
448         struct w83781d_data *data = i2c_get_clientdata(client); \
449         s32 val; \
450          \
451         val = simple_strtol(buf, NULL, 10); \
452          \
453         mutex_lock(&data->update_lock); \
454          \
455         if (nr >= 2) {  /* TEMP2 and TEMP3 */ \
456                 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
457                 w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
458                                 data->temp_##reg##_add[nr-2]); \
459         } else {        /* TEMP1 */ \
460                 data->temp_##reg = TEMP_TO_REG(val); \
461                 w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
462                         data->temp_##reg); \
463         } \
464          \
465         mutex_unlock(&data->update_lock); \
466         return count; \
467 }
468 store_temp_reg(OVER, max);
469 store_temp_reg(HYST, max_hyst);
470
471 #define sysfs_temp_offset(offset) \
472 static ssize_t \
473 show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
474 { \
475         return show_temp(dev, buf, offset); \
476 } \
477 static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
478
479 #define sysfs_temp_reg_offset(reg, offset) \
480 static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \
481 { \
482         return show_temp_##reg (dev, buf, offset); \
483 } \
484 static ssize_t store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
485 { \
486         return store_temp_##reg (dev, buf, count, offset); \
487 } \
488 static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
489
490 #define sysfs_temp_offsets(offset) \
491 sysfs_temp_offset(offset); \
492 sysfs_temp_reg_offset(max, offset); \
493 sysfs_temp_reg_offset(max_hyst, offset);
494
495 sysfs_temp_offsets(1);
496 sysfs_temp_offsets(2);
497 sysfs_temp_offsets(3);
498
499 #define device_create_file_temp(client, offset) \
500 do { \
501 device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
502 device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
503 device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
504 } while (0)
505
506 static ssize_t
507 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
508 {
509         struct w83781d_data *data = w83781d_update_device(dev);
510         return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
511 }
512
513 static
514 DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
515 #define device_create_file_vid(client) \
516 device_create_file(&client->dev, &dev_attr_cpu0_vid);
517 static ssize_t
518 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
519 {
520         struct w83781d_data *data = w83781d_update_device(dev);
521         return sprintf(buf, "%ld\n", (long) data->vrm);
522 }
523
524 static ssize_t
525 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
526 {
527         struct i2c_client *client = to_i2c_client(dev);
528         struct w83781d_data *data = i2c_get_clientdata(client);
529         u32 val;
530
531         val = simple_strtoul(buf, NULL, 10);
532         data->vrm = val;
533
534         return count;
535 }
536
537 static
538 DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
539 #define device_create_file_vrm(client) \
540 device_create_file(&client->dev, &dev_attr_vrm);
541 static ssize_t
542 show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
543 {
544         struct w83781d_data *data = w83781d_update_device(dev);
545         return sprintf(buf, "%u\n", data->alarms);
546 }
547
548 static
549 DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
550 #define device_create_file_alarms(client) \
551 device_create_file(&client->dev, &dev_attr_alarms);
552 static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf)
553 {
554         struct w83781d_data *data = w83781d_update_device(dev);
555         return sprintf(buf, "%ld\n",
556                        (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
557 }
558 static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf)
559 {
560         struct w83781d_data *data = w83781d_update_device(dev);
561         return sprintf(buf, "%ld\n",
562                        (long)BEEP_ENABLE_FROM_REG(data->beep_enable));
563 }
564
565 #define BEEP_ENABLE                     0       /* Store beep_enable */
566 #define BEEP_MASK                       1       /* Store beep_mask */
567
568 static ssize_t
569 store_beep_reg(struct device *dev, const char *buf, size_t count,
570                int update_mask)
571 {
572         struct i2c_client *client = to_i2c_client(dev);
573         struct w83781d_data *data = i2c_get_clientdata(client);
574         u32 val, val2;
575
576         val = simple_strtoul(buf, NULL, 10);
577
578         mutex_lock(&data->update_lock);
579
580         if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
581                 data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
582                 w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
583                                     data->beep_mask & 0xff);
584
585                 if ((data->type != w83781d) && (data->type != as99127f)) {
586                         w83781d_write_value(client, W83781D_REG_BEEP_INTS3,
587                                             ((data->beep_mask) >> 16) & 0xff);
588                 }
589
590                 val2 = (data->beep_mask >> 8) & 0x7f;
591         } else {                /* We are storing beep_enable */
592                 val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
593                 data->beep_enable = BEEP_ENABLE_TO_REG(val);
594         }
595
596         w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
597                             val2 | data->beep_enable << 7);
598
599         mutex_unlock(&data->update_lock);
600         return count;
601 }
602
603 #define sysfs_beep(REG, reg) \
604 static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \
605 { \
606         return show_beep_##reg(dev, attr, buf); \
607 } \
608 static ssize_t store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
609 { \
610         return store_beep_reg(dev, buf, count, BEEP_##REG); \
611 } \
612 static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg);
613
614 sysfs_beep(ENABLE, enable);
615 sysfs_beep(MASK, mask);
616
617 #define device_create_file_beep(client) \
618 do { \
619 device_create_file(&client->dev, &dev_attr_beep_enable); \
620 device_create_file(&client->dev, &dev_attr_beep_mask); \
621 } while (0)
622
623 static ssize_t
624 show_fan_div_reg(struct device *dev, char *buf, int nr)
625 {
626         struct w83781d_data *data = w83781d_update_device(dev);
627         return sprintf(buf, "%ld\n",
628                        (long) DIV_FROM_REG(data->fan_div[nr - 1]));
629 }
630
631 /* Note: we save and restore the fan minimum here, because its value is
632    determined in part by the fan divisor.  This follows the principle of
633    least suprise; the user doesn't expect the fan minimum to change just
634    because the divisor changed. */
635 static ssize_t
636 store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
637 {
638         struct i2c_client *client = to_i2c_client(dev);
639         struct w83781d_data *data = i2c_get_clientdata(client);
640         unsigned long min;
641         u8 reg;
642         unsigned long val = simple_strtoul(buf, NULL, 10);
643
644         mutex_lock(&data->update_lock);
645         
646         /* Save fan_min */
647         min = FAN_FROM_REG(data->fan_min[nr],
648                            DIV_FROM_REG(data->fan_div[nr]));
649
650         data->fan_div[nr] = DIV_TO_REG(val, data->type);
651
652         reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
653                & (nr==0 ? 0xcf : 0x3f))
654             | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
655         w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
656
657         /* w83781d and as99127f don't have extended divisor bits */
658         if (data->type != w83781d && data->type != as99127f) {
659                 reg = (w83781d_read_value(client, W83781D_REG_VBAT)
660                        & ~(1 << (5 + nr)))
661                     | ((data->fan_div[nr] & 0x04) << (3 + nr));
662                 w83781d_write_value(client, W83781D_REG_VBAT, reg);
663         }
664
665         /* Restore fan_min */
666         data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
667         w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
668
669         mutex_unlock(&data->update_lock);
670         return count;
671 }
672
673 #define sysfs_fan_div(offset) \
674 static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
675 { \
676         return show_fan_div_reg(dev, buf, offset); \
677 } \
678 static ssize_t store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
679 { \
680         return store_fan_div_reg(dev, buf, count, offset - 1); \
681 } \
682 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset);
683
684 sysfs_fan_div(1);
685 sysfs_fan_div(2);
686 sysfs_fan_div(3);
687
688 #define device_create_file_fan_div(client, offset) \
689 do { \
690 device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
691 } while (0)
692
693 static ssize_t
694 show_pwm_reg(struct device *dev, char *buf, int nr)
695 {
696         struct w83781d_data *data = w83781d_update_device(dev);
697         return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1]));
698 }
699
700 static ssize_t
701 show_pwmenable_reg(struct device *dev, char *buf, int nr)
702 {
703         struct w83781d_data *data = w83781d_update_device(dev);
704         return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]);
705 }
706
707 static ssize_t
708 store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
709 {
710         struct i2c_client *client = to_i2c_client(dev);
711         struct w83781d_data *data = i2c_get_clientdata(client);
712         u32 val;
713
714         val = simple_strtoul(buf, NULL, 10);
715
716         mutex_lock(&data->update_lock);
717         data->pwm[nr - 1] = PWM_TO_REG(val);
718         w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
719         mutex_unlock(&data->update_lock);
720         return count;
721 }
722
723 static ssize_t
724 store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
725 {
726         struct i2c_client *client = to_i2c_client(dev);
727         struct w83781d_data *data = i2c_get_clientdata(client);
728         u32 val, reg;
729
730         val = simple_strtoul(buf, NULL, 10);
731
732         mutex_lock(&data->update_lock);
733
734         switch (val) {
735         case 0:
736         case 1:
737                 reg = w83781d_read_value(client, W83781D_REG_PWMCLK12);
738                 w83781d_write_value(client, W83781D_REG_PWMCLK12,
739                                     (reg & 0xf7) | (val << 3));
740
741                 reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
742                 w83781d_write_value(client, W83781D_REG_BEEP_CONFIG,
743                                     (reg & 0xef) | (!val << 4));
744
745                 data->pwmenable[nr - 1] = val;
746                 break;
747
748         default:
749                 mutex_unlock(&data->update_lock);
750                 return -EINVAL;
751         }
752
753         mutex_unlock(&data->update_lock);
754         return count;
755 }
756
757 #define sysfs_pwm(offset) \
758 static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
759 { \
760         return show_pwm_reg(dev, buf, offset); \
761 } \
762 static ssize_t store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, \
763                 const char *buf, size_t count) \
764 { \
765         return store_pwm_reg(dev, buf, count, offset); \
766 } \
767 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
768                 show_regs_pwm_##offset, store_regs_pwm_##offset);
769
770 #define sysfs_pwmenable(offset) \
771 static ssize_t show_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
772 { \
773         return show_pwmenable_reg(dev, buf, offset); \
774 } \
775 static ssize_t store_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, \
776                 const char *buf, size_t count) \
777 { \
778         return store_pwmenable_reg(dev, buf, count, offset); \
779 } \
780 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
781                 show_regs_pwmenable_##offset, store_regs_pwmenable_##offset);
782
783 sysfs_pwm(1);
784 sysfs_pwm(2);
785 sysfs_pwmenable(2);             /* only PWM2 can be enabled/disabled */
786 sysfs_pwm(3);
787 sysfs_pwm(4);
788
789 #define device_create_file_pwm(client, offset) \
790 do { \
791 device_create_file(&client->dev, &dev_attr_pwm##offset); \
792 } while (0)
793
794 #define device_create_file_pwmenable(client, offset) \
795 do { \
796 device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
797 } while (0)
798
799 static ssize_t
800 show_sensor_reg(struct device *dev, char *buf, int nr)
801 {
802         struct w83781d_data *data = w83781d_update_device(dev);
803         return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
804 }
805
806 static ssize_t
807 store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
808 {
809         struct i2c_client *client = to_i2c_client(dev);
810         struct w83781d_data *data = i2c_get_clientdata(client);
811         u32 val, tmp;
812
813         val = simple_strtoul(buf, NULL, 10);
814
815         mutex_lock(&data->update_lock);
816
817         switch (val) {
818         case 1:         /* PII/Celeron diode */
819                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
820                 w83781d_write_value(client, W83781D_REG_SCFG1,
821                                     tmp | BIT_SCFG1[nr - 1]);
822                 tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
823                 w83781d_write_value(client, W83781D_REG_SCFG2,
824                                     tmp | BIT_SCFG2[nr - 1]);
825                 data->sens[nr - 1] = val;
826                 break;
827         case 2:         /* 3904 */
828                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
829                 w83781d_write_value(client, W83781D_REG_SCFG1,
830                                     tmp | BIT_SCFG1[nr - 1]);
831                 tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
832                 w83781d_write_value(client, W83781D_REG_SCFG2,
833                                     tmp & ~BIT_SCFG2[nr - 1]);
834                 data->sens[nr - 1] = val;
835                 break;
836         case W83781D_DEFAULT_BETA:      /* thermistor */
837                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
838                 w83781d_write_value(client, W83781D_REG_SCFG1,
839                                     tmp & ~BIT_SCFG1[nr - 1]);
840                 data->sens[nr - 1] = val;
841                 break;
842         default:
843                 dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
844                        (long) val, W83781D_DEFAULT_BETA);
845                 break;
846         }
847
848         mutex_unlock(&data->update_lock);
849         return count;
850 }
851
852 #define sysfs_sensor(offset) \
853 static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
854 { \
855     return show_sensor_reg(dev, buf, offset); \
856 } \
857 static ssize_t store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
858 { \
859     return store_sensor_reg(dev, buf, count, offset); \
860 } \
861 static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset);
862
863 sysfs_sensor(1);
864 sysfs_sensor(2);
865 sysfs_sensor(3);
866
867 #define device_create_file_sensor(client, offset) \
868 do { \
869 device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
870 } while (0)
871
872 /* This function is called when:
873      * w83781d_driver is inserted (when this module is loaded), for each
874        available adapter
875      * when a new adapter is inserted (and w83781d_driver is still present) */
876 static int
877 w83781d_attach_adapter(struct i2c_adapter *adapter)
878 {
879         if (!(adapter->class & I2C_CLASS_HWMON))
880                 return 0;
881         return i2c_probe(adapter, &addr_data, w83781d_detect);
882 }
883
884 static int
885 w83781d_isa_attach_adapter(struct i2c_adapter *adapter)
886 {
887         return w83781d_detect(adapter, isa_address, -1);
888 }
889
890 /* Assumes that adapter is of I2C, not ISA variety.
891  * OTHERWISE DON'T CALL THIS
892  */
893 static int
894 w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
895                 struct i2c_client *new_client)
896 {
897         int i, val1 = 0, id;
898         int err;
899         const char *client_name = "";
900         struct w83781d_data *data = i2c_get_clientdata(new_client);
901
902         data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
903         if (!(data->lm75[0])) {
904                 err = -ENOMEM;
905                 goto ERROR_SC_0;
906         }
907
908         id = i2c_adapter_id(adapter);
909
910         if (force_subclients[0] == id && force_subclients[1] == address) {
911                 for (i = 2; i <= 3; i++) {
912                         if (force_subclients[i] < 0x48 ||
913                             force_subclients[i] > 0x4f) {
914                                 dev_err(&new_client->dev, "Invalid subclient "
915                                         "address %d; must be 0x48-0x4f\n",
916                                         force_subclients[i]);
917                                 err = -EINVAL;
918                                 goto ERROR_SC_1;
919                         }
920                 }
921                 w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR,
922                                 (force_subclients[2] & 0x07) |
923                                 ((force_subclients[3] & 0x07) << 4));
924                 data->lm75[0]->addr = force_subclients[2];
925         } else {
926                 val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR);
927                 data->lm75[0]->addr = 0x48 + (val1 & 0x07);
928         }
929
930         if (kind != w83783s) {
931                 data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
932                 if (!(data->lm75[1])) {
933                         err = -ENOMEM;
934                         goto ERROR_SC_1;
935                 }
936
937                 if (force_subclients[0] == id &&
938                     force_subclients[1] == address) {
939                         data->lm75[1]->addr = force_subclients[3];
940                 } else {
941                         data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
942                 }
943                 if (data->lm75[0]->addr == data->lm75[1]->addr) {
944                         dev_err(&new_client->dev,
945                                "Duplicate addresses 0x%x for subclients.\n",
946                                data->lm75[0]->addr);
947                         err = -EBUSY;
948                         goto ERROR_SC_2;
949                 }
950         }
951
952         if (kind == w83781d)
953                 client_name = "w83781d subclient";
954         else if (kind == w83782d)
955                 client_name = "w83782d subclient";
956         else if (kind == w83783s)
957                 client_name = "w83783s subclient";
958         else if (kind == w83627hf)
959                 client_name = "w83627hf subclient";
960         else if (kind == as99127f)
961                 client_name = "as99127f subclient";
962
963         for (i = 0; i <= 1; i++) {
964                 /* store all data in w83781d */
965                 i2c_set_clientdata(data->lm75[i], NULL);
966                 data->lm75[i]->adapter = adapter;
967                 data->lm75[i]->driver = &w83781d_driver;
968                 data->lm75[i]->flags = 0;
969                 strlcpy(data->lm75[i]->name, client_name,
970                         I2C_NAME_SIZE);
971                 if ((err = i2c_attach_client(data->lm75[i]))) {
972                         dev_err(&new_client->dev, "Subclient %d "
973                                 "registration at address 0x%x "
974                                 "failed.\n", i, data->lm75[i]->addr);
975                         if (i == 1)
976                                 goto ERROR_SC_3;
977                         goto ERROR_SC_2;
978                 }
979                 if (kind == w83783s)
980                         break;
981         }
982
983         return 0;
984
985 /* Undo inits in case of errors */
986 ERROR_SC_3:
987         i2c_detach_client(data->lm75[0]);
988 ERROR_SC_2:
989         kfree(data->lm75[1]);
990 ERROR_SC_1:
991         kfree(data->lm75[0]);
992 ERROR_SC_0:
993         return err;
994 }
995
996 static int
997 w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
998 {
999         int i = 0, val1 = 0, val2;
1000         struct i2c_client *new_client;
1001         struct w83781d_data *data;
1002         int err;
1003         const char *client_name = "";
1004         int is_isa = i2c_is_isa_adapter(adapter);
1005         enum vendor { winbond, asus } vendid;
1006
1007         if (!is_isa
1008             && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1009                 err = -EINVAL;
1010                 goto ERROR0;
1011         }
1012
1013         /* Prevent users from forcing a kind for a bus it isn't supposed
1014            to possibly be on */
1015         if (is_isa && (kind == as99127f || kind == w83783s)) {
1016                 dev_err(&adapter->dev,
1017                         "Cannot force I2C-only chip for ISA address 0x%02x.\n",
1018                         address);
1019                 err = -EINVAL;
1020                 goto ERROR0;
1021         }
1022         
1023         if (is_isa)
1024                 if (!request_region(address, W83781D_EXTENT,
1025                                     w83781d_isa_driver.driver.name)) {
1026                         dev_dbg(&adapter->dev, "Request of region "
1027                                 "0x%x-0x%x for w83781d failed\n", address,
1028                                 address + W83781D_EXTENT - 1);
1029                         err = -EBUSY;
1030                         goto ERROR0;
1031                 }
1032
1033         /* Probe whether there is anything available on this address. Already
1034            done for SMBus clients */
1035         if (kind < 0) {
1036                 if (is_isa) {
1037
1038 #define REALLY_SLOW_IO
1039                         /* We need the timeouts for at least some LM78-like
1040                            chips. But only if we read 'undefined' registers. */
1041                         i = inb_p(address + 1);
1042                         if (inb_p(address + 2) != i
1043                          || inb_p(address + 3) != i
1044                          || inb_p(address + 7) != i) {
1045                                 dev_dbg(&adapter->dev, "Detection of w83781d "
1046                                         "chip failed at step 1\n");
1047                                 err = -ENODEV;
1048                                 goto ERROR1;
1049                         }
1050 #undef REALLY_SLOW_IO
1051
1052                         /* Let's just hope nothing breaks here */
1053                         i = inb_p(address + 5) & 0x7f;
1054                         outb_p(~i & 0x7f, address + 5);
1055                         val2 = inb_p(address + 5) & 0x7f;
1056                         if (val2 != (~i & 0x7f)) {
1057                                 outb_p(i, address + 5);
1058                                 dev_dbg(&adapter->dev, "Detection of w83781d "
1059                                         "chip failed at step 2 (0x%x != "
1060                                         "0x%x at 0x%x)\n", val2, ~i & 0x7f,
1061                                         address + 5);
1062                                 err = -ENODEV;
1063                                 goto ERROR1;
1064                         }
1065                 }
1066         }
1067
1068         /* OK. For now, we presume we have a valid client. We now create the
1069            client structure, even though we cannot fill it completely yet.
1070            But it allows us to access w83781d_{read,write}_value. */
1071
1072         if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
1073                 err = -ENOMEM;
1074                 goto ERROR1;
1075         }
1076
1077         new_client = &data->client;
1078         i2c_set_clientdata(new_client, data);
1079         new_client->addr = address;
1080         mutex_init(&data->lock);
1081         new_client->adapter = adapter;
1082         new_client->driver = is_isa ? &w83781d_isa_driver : &w83781d_driver;
1083         new_client->flags = 0;
1084
1085         /* Now, we do the remaining detection. */
1086
1087         /* The w8378?d may be stuck in some other bank than bank 0. This may
1088            make reading other information impossible. Specify a force=... or
1089            force_*=... parameter, and the Winbond will be reset to the right
1090            bank. */
1091         if (kind < 0) {
1092                 if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) {
1093                         dev_dbg(&new_client->dev, "Detection failed at step "
1094                                 "3\n");
1095                         err = -ENODEV;
1096                         goto ERROR2;
1097                 }
1098                 val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
1099                 val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
1100                 /* Check for Winbond or Asus ID if in bank 0 */
1101                 if ((!(val1 & 0x07)) &&
1102                     (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
1103                      || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
1104                         dev_dbg(&new_client->dev, "Detection failed at step "
1105                                 "4\n");
1106                         err = -ENODEV;
1107                         goto ERROR2;
1108                 }
1109                 /* If Winbond SMBus, check address at 0x48.
1110                    Asus doesn't support, except for as99127f rev.2 */
1111                 if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
1112                                   ((val1 & 0x80) && (val2 == 0x5c)))) {
1113                         if (w83781d_read_value
1114                             (new_client, W83781D_REG_I2C_ADDR) != address) {
1115                                 dev_dbg(&new_client->dev, "Detection failed "
1116                                         "at step 5\n");
1117                                 err = -ENODEV;
1118                                 goto ERROR2;
1119                         }
1120                 }
1121         }
1122
1123         /* We have either had a force parameter, or we have already detected the
1124            Winbond. Put it now into bank 0 and Vendor ID High Byte */
1125         w83781d_write_value(new_client, W83781D_REG_BANK,
1126                             (w83781d_read_value(new_client,
1127                                                 W83781D_REG_BANK) & 0x78) |
1128                             0x80);
1129
1130         /* Determine the chip type. */
1131         if (kind <= 0) {
1132                 /* get vendor ID */
1133                 val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
1134                 if (val2 == 0x5c)
1135                         vendid = winbond;
1136                 else if (val2 == 0x12)
1137                         vendid = asus;
1138                 else {
1139                         dev_dbg(&new_client->dev, "Chip was made by neither "
1140                                 "Winbond nor Asus?\n");
1141                         err = -ENODEV;
1142                         goto ERROR2;
1143                 }
1144
1145                 val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID);
1146                 if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1147                         kind = w83781d;
1148                 else if (val1 == 0x30 && vendid == winbond)
1149                         kind = w83782d;
1150                 else if (val1 == 0x40 && vendid == winbond && !is_isa
1151                                 && address == 0x2d)
1152                         kind = w83783s;
1153                 else if (val1 == 0x21 && vendid == winbond)
1154                         kind = w83627hf;
1155                 else if (val1 == 0x31 && !is_isa && address >= 0x28)
1156                         kind = as99127f;
1157                 else {
1158                         if (kind == 0)
1159                                 dev_warn(&new_client->dev, "Ignoring 'force' "
1160                                          "parameter for unknown chip at "
1161                                          "adapter %d, address 0x%02x\n",
1162                                          i2c_adapter_id(adapter), address);
1163                         err = -EINVAL;
1164                         goto ERROR2;
1165                 }
1166         }
1167
1168         if (kind == w83781d) {
1169                 client_name = "w83781d";
1170         } else if (kind == w83782d) {
1171                 client_name = "w83782d";
1172         } else if (kind == w83783s) {
1173                 client_name = "w83783s";
1174         } else if (kind == w83627hf) {
1175                 client_name = "w83627hf";
1176         } else if (kind == as99127f) {
1177                 client_name = "as99127f";
1178         }
1179
1180         /* Fill in the remaining client fields and put into the global list */
1181         strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
1182         data->type = kind;
1183
1184         data->valid = 0;
1185         mutex_init(&data->update_lock);
1186
1187         /* Tell the I2C layer a new client has arrived */
1188         if ((err = i2c_attach_client(new_client)))
1189                 goto ERROR2;
1190
1191         /* attach secondary i2c lm75-like clients */
1192         if (!is_isa) {
1193                 if ((err = w83781d_detect_subclients(adapter, address,
1194                                 kind, new_client)))
1195                         goto ERROR3;
1196         } else {
1197                 data->lm75[0] = NULL;
1198                 data->lm75[1] = NULL;
1199         }
1200
1201         /* Initialize the chip */
1202         w83781d_init_client(new_client);
1203
1204         /* A few vars need to be filled upon startup */
1205         for (i = 1; i <= 3; i++) {
1206                 data->fan_min[i - 1] = w83781d_read_value(new_client,
1207                                         W83781D_REG_FAN_MIN(i));
1208         }
1209         if (kind != w83781d && kind != as99127f)
1210                 for (i = 0; i < 4; i++)
1211                         data->pwmenable[i] = 1;
1212
1213         /* Register sysfs hooks */
1214         data->class_dev = hwmon_device_register(&new_client->dev);
1215         if (IS_ERR(data->class_dev)) {
1216                 err = PTR_ERR(data->class_dev);
1217                 goto ERROR4;
1218         }
1219
1220         device_create_file_in(new_client, 0);
1221         if (kind != w83783s)
1222                 device_create_file_in(new_client, 1);
1223         device_create_file_in(new_client, 2);
1224         device_create_file_in(new_client, 3);
1225         device_create_file_in(new_client, 4);
1226         device_create_file_in(new_client, 5);
1227         device_create_file_in(new_client, 6);
1228         if (kind != as99127f && kind != w83781d && kind != w83783s) {
1229                 device_create_file_in(new_client, 7);
1230                 device_create_file_in(new_client, 8);
1231         }
1232
1233         device_create_file_fan(new_client, 1);
1234         device_create_file_fan(new_client, 2);
1235         device_create_file_fan(new_client, 3);
1236
1237         device_create_file_temp(new_client, 1);
1238         device_create_file_temp(new_client, 2);
1239         if (kind != w83783s)
1240                 device_create_file_temp(new_client, 3);
1241
1242         device_create_file_vid(new_client);
1243         device_create_file_vrm(new_client);
1244
1245         device_create_file_fan_div(new_client, 1);
1246         device_create_file_fan_div(new_client, 2);
1247         device_create_file_fan_div(new_client, 3);
1248
1249         device_create_file_alarms(new_client);
1250
1251         device_create_file_beep(new_client);
1252
1253         if (kind != w83781d && kind != as99127f) {
1254                 device_create_file_pwm(new_client, 1);
1255                 device_create_file_pwm(new_client, 2);
1256                 device_create_file_pwmenable(new_client, 2);
1257         }
1258         if (kind == w83782d && !is_isa) {
1259                 device_create_file_pwm(new_client, 3);
1260                 device_create_file_pwm(new_client, 4);
1261         }
1262
1263         if (kind != as99127f && kind != w83781d) {
1264                 device_create_file_sensor(new_client, 1);
1265                 device_create_file_sensor(new_client, 2);
1266                 if (kind != w83783s)
1267                         device_create_file_sensor(new_client, 3);
1268         }
1269
1270         return 0;
1271
1272 ERROR4:
1273         if (data->lm75[1]) {
1274                 i2c_detach_client(data->lm75[1]);
1275                 kfree(data->lm75[1]);
1276         }
1277         if (data->lm75[0]) {
1278                 i2c_detach_client(data->lm75[0]);
1279                 kfree(data->lm75[0]);
1280         }
1281 ERROR3:
1282         i2c_detach_client(new_client);
1283 ERROR2:
1284         kfree(data);
1285 ERROR1:
1286         if (is_isa)
1287                 release_region(address, W83781D_EXTENT);
1288 ERROR0:
1289         return err;
1290 }
1291
1292 static int
1293 w83781d_detach_client(struct i2c_client *client)
1294 {
1295         struct w83781d_data *data = i2c_get_clientdata(client);
1296         int err;
1297
1298         /* main client */
1299         if (data)
1300                 hwmon_device_unregister(data->class_dev);
1301
1302         if (i2c_is_isa_client(client))
1303                 release_region(client->addr, W83781D_EXTENT);
1304
1305         if ((err = i2c_detach_client(client)))
1306                 return err;
1307
1308         /* main client */
1309         if (data)
1310                 kfree(data);
1311
1312         /* subclient */
1313         else
1314                 kfree(client);
1315
1316         return 0;
1317 }
1318
1319 /* The SMBus locks itself, usually, but nothing may access the Winbond between
1320    bank switches. ISA access must always be locked explicitly! 
1321    We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1322    would slow down the W83781D access and should not be necessary. 
1323    There are some ugly typecasts here, but the good news is - they should
1324    nowhere else be necessary! */
1325 static int
1326 w83781d_read_value(struct i2c_client *client, u16 reg)
1327 {
1328         struct w83781d_data *data = i2c_get_clientdata(client);
1329         int res, word_sized, bank;
1330         struct i2c_client *cl;
1331
1332         mutex_lock(&data->lock);
1333         if (i2c_is_isa_client(client)) {
1334                 word_sized = (((reg & 0xff00) == 0x100)
1335                               || ((reg & 0xff00) == 0x200))
1336                     && (((reg & 0x00ff) == 0x50)
1337                         || ((reg & 0x00ff) == 0x53)
1338                         || ((reg & 0x00ff) == 0x55));
1339                 if (reg & 0xff00) {
1340                         outb_p(W83781D_REG_BANK,
1341                                client->addr + W83781D_ADDR_REG_OFFSET);
1342                         outb_p(reg >> 8,
1343                                client->addr + W83781D_DATA_REG_OFFSET);
1344                 }
1345                 outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1346                 res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
1347                 if (word_sized) {
1348                         outb_p((reg & 0xff) + 1,
1349                                client->addr + W83781D_ADDR_REG_OFFSET);
1350                         res =
1351                             (res << 8) + inb_p(client->addr +
1352                                                W83781D_DATA_REG_OFFSET);
1353                 }
1354                 if (reg & 0xff00) {
1355                         outb_p(W83781D_REG_BANK,
1356                                client->addr + W83781D_ADDR_REG_OFFSET);
1357                         outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1358                 }
1359         } else {
1360                 bank = (reg >> 8) & 0x0f;
1361                 if (bank > 2)
1362                         /* switch banks */
1363                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1364                                                   bank);
1365                 if (bank == 0 || bank > 2) {
1366                         res = i2c_smbus_read_byte_data(client, reg & 0xff);
1367                 } else {
1368                         /* switch to subclient */
1369                         cl = data->lm75[bank - 1];
1370                         /* convert from ISA to LM75 I2C addresses */
1371                         switch (reg & 0xff) {
1372                         case 0x50:      /* TEMP */
1373                                 res = swab16(i2c_smbus_read_word_data(cl, 0));
1374                                 break;
1375                         case 0x52:      /* CONFIG */
1376                                 res = i2c_smbus_read_byte_data(cl, 1);
1377                                 break;
1378                         case 0x53:      /* HYST */
1379                                 res = swab16(i2c_smbus_read_word_data(cl, 2));
1380                                 break;
1381                         case 0x55:      /* OVER */
1382                         default:
1383                                 res = swab16(i2c_smbus_read_word_data(cl, 3));
1384                                 break;
1385                         }
1386                 }
1387                 if (bank > 2)
1388                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1389         }
1390         mutex_unlock(&data->lock);
1391         return res;
1392 }
1393
1394 static int
1395 w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
1396 {
1397         struct w83781d_data *data = i2c_get_clientdata(client);
1398         int word_sized, bank;
1399         struct i2c_client *cl;
1400
1401         mutex_lock(&data->lock);
1402         if (i2c_is_isa_client(client)) {
1403                 word_sized = (((reg & 0xff00) == 0x100)
1404                               || ((reg & 0xff00) == 0x200))
1405                     && (((reg & 0x00ff) == 0x53)
1406                         || ((reg & 0x00ff) == 0x55));
1407                 if (reg & 0xff00) {
1408                         outb_p(W83781D_REG_BANK,
1409                                client->addr + W83781D_ADDR_REG_OFFSET);
1410                         outb_p(reg >> 8,
1411                                client->addr + W83781D_DATA_REG_OFFSET);
1412                 }
1413                 outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
1414                 if (word_sized) {
1415                         outb_p(value >> 8,
1416                                client->addr + W83781D_DATA_REG_OFFSET);
1417                         outb_p((reg & 0xff) + 1,
1418                                client->addr + W83781D_ADDR_REG_OFFSET);
1419                 }
1420                 outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
1421                 if (reg & 0xff00) {
1422                         outb_p(W83781D_REG_BANK,
1423                                client->addr + W83781D_ADDR_REG_OFFSET);
1424                         outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
1425                 }
1426         } else {
1427                 bank = (reg >> 8) & 0x0f;
1428                 if (bank > 2)
1429                         /* switch banks */
1430                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1431                                                   bank);
1432                 if (bank == 0 || bank > 2) {
1433                         i2c_smbus_write_byte_data(client, reg & 0xff,
1434                                                   value & 0xff);
1435                 } else {
1436                         /* switch to subclient */
1437                         cl = data->lm75[bank - 1];
1438                         /* convert from ISA to LM75 I2C addresses */
1439                         switch (reg & 0xff) {
1440                         case 0x52:      /* CONFIG */
1441                                 i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1442                                 break;
1443                         case 0x53:      /* HYST */
1444                                 i2c_smbus_write_word_data(cl, 2, swab16(value));
1445                                 break;
1446                         case 0x55:      /* OVER */
1447                                 i2c_smbus_write_word_data(cl, 3, swab16(value));
1448                                 break;
1449                         }
1450                 }
1451                 if (bank > 2)
1452                         i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1453         }
1454         mutex_unlock(&data->lock);
1455         return 0;
1456 }
1457
1458 static void
1459 w83781d_init_client(struct i2c_client *client)
1460 {
1461         struct w83781d_data *data = i2c_get_clientdata(client);
1462         int i, p;
1463         int type = data->type;
1464         u8 tmp;
1465
1466         if (reset && type != as99127f) { /* this resets registers we don't have
1467                                            documentation for on the as99127f */
1468                 /* Resetting the chip has been the default for a long time,
1469                    but it causes the BIOS initializations (fan clock dividers,
1470                    thermal sensor types...) to be lost, so it is now optional.
1471                    It might even go away if nobody reports it as being useful,
1472                    as I see very little reason why this would be needed at
1473                    all. */
1474                 dev_info(&client->dev, "If reset=1 solved a problem you were "
1475                          "having, please report!\n");
1476
1477                 /* save these registers */
1478                 i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
1479                 p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
1480                 /* Reset all except Watchdog values and last conversion values
1481                    This sets fan-divs to 2, among others */
1482                 w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
1483                 /* Restore the registers and disable power-on abnormal beep.
1484                    This saves FAN 1/2/3 input/output values set by BIOS. */
1485                 w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
1486                 w83781d_write_value(client, W83781D_REG_PWMCLK12, p);
1487                 /* Disable master beep-enable (reset turns it on).
1488                    Individual beep_mask should be reset to off but for some reason
1489                    disabling this bit helps some people not get beeped */
1490                 w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
1491         }
1492
1493         /* Disable power-on abnormal beep, as advised by the datasheet.
1494            Already done if reset=1. */
1495         if (init && !reset && type != as99127f) {
1496                 i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
1497                 w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
1498         }
1499
1500         data->vrm = vid_which_vrm();
1501
1502         if ((type != w83781d) && (type != as99127f)) {
1503                 tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
1504                 for (i = 1; i <= 3; i++) {
1505                         if (!(tmp & BIT_SCFG1[i - 1])) {
1506                                 data->sens[i - 1] = W83781D_DEFAULT_BETA;
1507                         } else {
1508                                 if (w83781d_read_value
1509                                     (client,
1510                                      W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1511                                         data->sens[i - 1] = 1;
1512                                 else
1513                                         data->sens[i - 1] = 2;
1514                         }
1515                         if (type == w83783s && i == 2)
1516                                 break;
1517                 }
1518         }
1519
1520         if (init && type != as99127f) {
1521                 /* Enable temp2 */
1522                 tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
1523                 if (tmp & 0x01) {
1524                         dev_warn(&client->dev, "Enabling temp2, readings "
1525                                  "might not make sense\n");
1526                         w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
1527                                 tmp & 0xfe);
1528                 }
1529
1530                 /* Enable temp3 */
1531                 if (type != w83783s) {
1532                         tmp = w83781d_read_value(client,
1533                                 W83781D_REG_TEMP3_CONFIG);
1534                         if (tmp & 0x01) {
1535                                 dev_warn(&client->dev, "Enabling temp3, "
1536                                          "readings might not make sense\n");
1537                                 w83781d_write_value(client,
1538                                         W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1539                         }
1540                 }
1541         }
1542
1543         /* Start monitoring */
1544         w83781d_write_value(client, W83781D_REG_CONFIG,
1545                             (w83781d_read_value(client,
1546                                                 W83781D_REG_CONFIG) & 0xf7)
1547                             | 0x01);
1548 }
1549
1550 static struct w83781d_data *w83781d_update_device(struct device *dev)
1551 {
1552         struct i2c_client *client = to_i2c_client(dev);
1553         struct w83781d_data *data = i2c_get_clientdata(client);
1554         int i;
1555
1556         mutex_lock(&data->update_lock);
1557
1558         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1559             || !data->valid) {
1560                 dev_dbg(dev, "Starting device update\n");
1561
1562                 for (i = 0; i <= 8; i++) {
1563                         if (data->type == w83783s && i == 1)
1564                                 continue;       /* 783S has no in1 */
1565                         data->in[i] =
1566                             w83781d_read_value(client, W83781D_REG_IN(i));
1567                         data->in_min[i] =
1568                             w83781d_read_value(client, W83781D_REG_IN_MIN(i));
1569                         data->in_max[i] =
1570                             w83781d_read_value(client, W83781D_REG_IN_MAX(i));
1571                         if ((data->type != w83782d)
1572                             && (data->type != w83627hf) && (i == 6))
1573                                 break;
1574                 }
1575                 for (i = 1; i <= 3; i++) {
1576                         data->fan[i - 1] =
1577                             w83781d_read_value(client, W83781D_REG_FAN(i));
1578                         data->fan_min[i - 1] =
1579                             w83781d_read_value(client, W83781D_REG_FAN_MIN(i));
1580                 }
1581                 if (data->type != w83781d && data->type != as99127f) {
1582                         for (i = 1; i <= 4; i++) {
1583                                 data->pwm[i - 1] =
1584                                     w83781d_read_value(client,
1585                                                        W83781D_REG_PWM(i));
1586                                 if ((data->type != w83782d
1587                                      || i2c_is_isa_client(client))
1588                                     && i == 2)
1589                                         break;
1590                         }
1591                         /* Only PWM2 can be disabled */
1592                         data->pwmenable[1] = (w83781d_read_value(client,
1593                                               W83781D_REG_PWMCLK12) & 0x08) >> 3;
1594                 }
1595
1596                 data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
1597                 data->temp_max =
1598                     w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
1599                 data->temp_max_hyst =
1600                     w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
1601                 data->temp_add[0] =
1602                     w83781d_read_value(client, W83781D_REG_TEMP(2));
1603                 data->temp_max_add[0] =
1604                     w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
1605                 data->temp_max_hyst_add[0] =
1606                     w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
1607                 if (data->type != w83783s) {
1608                         data->temp_add[1] =
1609                             w83781d_read_value(client, W83781D_REG_TEMP(3));
1610                         data->temp_max_add[1] =
1611                             w83781d_read_value(client,
1612                                                W83781D_REG_TEMP_OVER(3));
1613                         data->temp_max_hyst_add[1] =
1614                             w83781d_read_value(client,
1615                                                W83781D_REG_TEMP_HYST(3));
1616                 }
1617                 i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
1618                 data->vid = i & 0x0f;
1619                 data->vid |= (w83781d_read_value(client,
1620                                         W83781D_REG_CHIPID) & 0x01) << 4;
1621                 data->fan_div[0] = (i >> 4) & 0x03;
1622                 data->fan_div[1] = (i >> 6) & 0x03;
1623                 data->fan_div[2] = (w83781d_read_value(client,
1624                                         W83781D_REG_PIN) >> 6) & 0x03;
1625                 if ((data->type != w83781d) && (data->type != as99127f)) {
1626                         i = w83781d_read_value(client, W83781D_REG_VBAT);
1627                         data->fan_div[0] |= (i >> 3) & 0x04;
1628                         data->fan_div[1] |= (i >> 4) & 0x04;
1629                         data->fan_div[2] |= (i >> 5) & 0x04;
1630                 }
1631                 if ((data->type == w83782d) || (data->type == w83627hf)) {
1632                         data->alarms = w83781d_read_value(client,
1633                                                 W83782D_REG_ALARM1)
1634                                      | (w83781d_read_value(client,
1635                                                 W83782D_REG_ALARM2) << 8)
1636                                      | (w83781d_read_value(client,
1637                                                 W83782D_REG_ALARM3) << 16);
1638                 } else if (data->type == w83783s) {
1639                         data->alarms = w83781d_read_value(client,
1640                                                 W83782D_REG_ALARM1)
1641                                      | (w83781d_read_value(client,
1642                                                 W83782D_REG_ALARM2) << 8);
1643                 } else {
1644                         /* No real-time status registers, fall back to
1645                            interrupt status registers */
1646                         data->alarms = w83781d_read_value(client,
1647                                                 W83781D_REG_ALARM1)
1648                                      | (w83781d_read_value(client,
1649                                                 W83781D_REG_ALARM2) << 8);
1650                 }
1651                 i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
1652                 data->beep_enable = i >> 7;
1653                 data->beep_mask = ((i & 0x7f) << 8) +
1654                     w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
1655                 if ((data->type != w83781d) && (data->type != as99127f)) {
1656                         data->beep_mask |=
1657                             w83781d_read_value(client,
1658                                                W83781D_REG_BEEP_INTS3) << 16;
1659                 }
1660                 data->last_updated = jiffies;
1661                 data->valid = 1;
1662         }
1663
1664         mutex_unlock(&data->update_lock);
1665
1666         return data;
1667 }
1668
1669 static int __init
1670 sensors_w83781d_init(void)
1671 {
1672         int res;
1673
1674         res = i2c_add_driver(&w83781d_driver);
1675         if (res)
1676                 return res;
1677
1678         res = i2c_isa_add_driver(&w83781d_isa_driver);
1679         if (res) {
1680                 i2c_del_driver(&w83781d_driver);
1681                 return res;
1682         }
1683
1684         return 0;
1685 }
1686
1687 static void __exit
1688 sensors_w83781d_exit(void)
1689 {
1690         i2c_isa_del_driver(&w83781d_isa_driver);
1691         i2c_del_driver(&w83781d_driver);
1692 }
1693
1694 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
1695               "Philip Edelbrock <phil@netroedge.com>, "
1696               "and Mark Studebaker <mdsxyz123@yahoo.com>");
1697 MODULE_DESCRIPTION("W83781D driver");
1698 MODULE_LICENSE("GPL");
1699
1700 module_init(sensors_w83781d_init);
1701 module_exit(sensors_w83781d_exit);