git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/sleep/main.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18
  19 #include <asm/io.h>
  20
  21 #include <acpi/acpi_bus.h>
  22 #include <acpi/acpi_drivers.h>
  23 #include "sleep.h"
  24
  25 u8 sleep_states[ACPI_S_STATE_COUNT];
  26
  27 #ifdef CONFIG_PM_SLEEP
  28 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  29 static bool acpi_sleep_finish_wake_up;
  30
  31 /*
  32  * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we
  33  * allow the user to request that behavior by using the 'acpi_new_pts_ordering'
  34  * kernel command line option that causes the following variable to be set.
  35  */
  36 static bool new_pts_ordering;
  37
  38 static int __init acpi_new_pts_ordering(char *str)
  39 {
  40         new_pts_ordering = true;
  41         return 1;
  42 }
  43 __setup("acpi_new_pts_ordering", acpi_new_pts_ordering);
  44 #endif
  45
  46 static int acpi_sleep_prepare(u32 acpi_state)
  47 {
  48 #ifdef CONFIG_ACPI_SLEEP
  49         /* do we have a wakeup address for S2 and S3? */
  50         if (acpi_state == ACPI_STATE_S3) {
  51                 if (!acpi_wakeup_address) {
  52                         return -EFAULT;
  53                 }
  54                 acpi_set_firmware_waking_vector((acpi_physical_address)
  55                                                 virt_to_phys((void *)
  56                                                              acpi_wakeup_address));
  57
  58         }
  59         ACPI_FLUSH_CPU_CACHE();
  60         acpi_enable_wakeup_device_prep(acpi_state);
  61 #endif
  62         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  63                 acpi_state);
  64         acpi_enter_sleep_state_prep(acpi_state);
  65         return 0;
  66 }
  67
  68 #ifdef CONFIG_SUSPEND
  69 static struct platform_suspend_ops acpi_pm_ops;
  70
  71 extern void do_suspend_lowlevel(void);
  72
  73 static u32 acpi_suspend_states[] = {
  74         [PM_SUSPEND_ON] = ACPI_STATE_S0,
  75         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
  76         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
  77         [PM_SUSPEND_MAX] = ACPI_STATE_S5
  78 };
  79
  80 static int init_8259A_after_S1;
  81
  82 /**
  83  *      acpi_pm_begin - Set the target system sleep state to the state
  84  *              associated with given @pm_state, if supported.
  85  */
  86
  87 static int acpi_pm_begin(suspend_state_t pm_state)
  88 {
  89         u32 acpi_state = acpi_suspend_states[pm_state];
  90         int error = 0;
  91
  92         if (sleep_states[acpi_state]) {
  93                 acpi_target_sleep_state = acpi_state;
  94                 if (new_pts_ordering)
  95                         return 0;
  96
  97                 error = acpi_sleep_prepare(acpi_state);
  98                 if (error)
  99                         acpi_target_sleep_state = ACPI_STATE_S0;
 100                 else
 101                         acpi_sleep_finish_wake_up = true;
 102         } else {
 103                 printk(KERN_ERR "ACPI does not support this state: %d\n",
 104                         pm_state);
 105                 error = -ENOSYS;
 106         }
 107         return error;
 108 }
 109
 110 /**
 111  *      acpi_pm_prepare - Do preliminary suspend work.
 112  *
 113  *      If necessary, set the firmware waking vector and do arch-specific
 114  *      nastiness to get the wakeup code to the waking vector.
 115  */
 116
 117 static int acpi_pm_prepare(void)
 118 {
 119         if (new_pts_ordering) {
 120                 int error = acpi_sleep_prepare(acpi_target_sleep_state);
 121
 122                 if (error) {
 123                         acpi_target_sleep_state = ACPI_STATE_S0;
 124                         return error;
 125                 }
 126                 acpi_sleep_finish_wake_up = true;
 127         }
 128
 129         return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
 130 }
 131
 132 /**
 133  *      acpi_pm_enter - Actually enter a sleep state.
 134  *      @pm_state: ignored
 135  *
 136  *      Flush caches and go to sleep. For STR we have to call arch-specific
 137  *      assembly, which in turn call acpi_enter_sleep_state().
 138  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 139  */
 140
 141 static int acpi_pm_enter(suspend_state_t pm_state)
 142 {
 143         acpi_status status = AE_OK;
 144         unsigned long flags = 0;
 145         u32 acpi_state = acpi_target_sleep_state;
 146
 147         ACPI_FLUSH_CPU_CACHE();
 148
 149         /* Do arch specific saving of state. */
 150         if (acpi_state == ACPI_STATE_S3) {
 151                 int error = acpi_save_state_mem();
 152
 153                 if (error)
 154                         return error;
 155         }
 156
 157         local_irq_save(flags);
 158         acpi_enable_wakeup_device(acpi_state);
 159         switch (acpi_state) {
 160         case ACPI_STATE_S1:
 161                 barrier();
 162                 status = acpi_enter_sleep_state(acpi_state);
 163                 break;
 164
 165         case ACPI_STATE_S3:
 166                 do_suspend_lowlevel();
 167                 break;
 168         }
 169
 170         /* Reprogram control registers and execute _BFS */
 171         acpi_leave_sleep_state_prep(acpi_state);
 172
 173         /* ACPI 3.0 specs (P62) says that it's the responsibility
 174          * of the OSPM to clear the status bit [ implying that the
 175          * POWER_BUTTON event should not reach userspace ]
 176          */
 177         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
 178                 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 179
 180         /*
 181          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 182          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 183          * acpi_leave_sleep_state will reenable specific GPEs later
 184          */
 185         acpi_hw_disable_all_gpes();
 186
 187         local_irq_restore(flags);
 188         printk(KERN_DEBUG "Back to C!\n");
 189
 190         /* restore processor state */
 191         if (acpi_state == ACPI_STATE_S3)
 192                 acpi_restore_state_mem();
 193
 194         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 195 }
 196
 197 /**
 198  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 199  *
 200  *      This is called after we wake back up (or if entering the sleep state
 201  *      failed).
 202  */
 203
 204 static void acpi_pm_finish(void)
 205 {
 206         u32 acpi_state = acpi_target_sleep_state;
 207
 208         acpi_disable_wakeup_device(acpi_state);
 209         acpi_leave_sleep_state(acpi_state);
 210
 211         /* reset firmware waking vector */
 212         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 213
 214         acpi_target_sleep_state = ACPI_STATE_S0;
 215         acpi_sleep_finish_wake_up = false;
 216
 217 #ifdef CONFIG_X86
 218         if (init_8259A_after_S1) {
 219                 printk("Broken toshiba laptop -> kicking interrupts\n");
 220                 init_8259A(0);
 221         }
 222 #endif
 223 }
 224
 225 /**
 226  *      acpi_pm_end - Finish up suspend sequence.
 227  */
 228
 229 static void acpi_pm_end(void)
 230 {
 231         /*
 232          * This is necessary in case acpi_pm_finish() is not called directly
 233          * during a failing transition to a sleep state.
 234          */
 235         if (acpi_sleep_finish_wake_up)
 236                 acpi_pm_finish();
 237 }
 238
 239 static int acpi_pm_state_valid(suspend_state_t pm_state)
 240 {
 241         u32 acpi_state;
 242
 243         switch (pm_state) {
 244         case PM_SUSPEND_ON:
 245         case PM_SUSPEND_STANDBY:
 246         case PM_SUSPEND_MEM:
 247                 acpi_state = acpi_suspend_states[pm_state];
 248
 249                 return sleep_states[acpi_state];
 250         default:
 251                 return 0;
 252         }
 253 }
 254
 255 static struct platform_suspend_ops acpi_pm_ops = {
 256         .valid = acpi_pm_state_valid,
 257         .begin = acpi_pm_begin,
 258         .prepare = acpi_pm_prepare,
 259         .enter = acpi_pm_enter,
 260         .finish = acpi_pm_finish,
 261         .end = acpi_pm_end,
 262 };
 263
 264 /*
 265  * Toshiba fails to preserve interrupts over S1, reinitialization
 266  * of 8259 is needed after S1 resume.
 267  */
 268 static int __init init_ints_after_s1(const struct dmi_system_id *d)
 269 {
 270         printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident);
 271         init_8259A_after_S1 = 1;
 272         return 0;
 273 }
 274
 275 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 276         {
 277          .callback = init_ints_after_s1,
 278          .ident = "Toshiba Satellite 4030cdt",
 279          .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),},
 280          },
 281         {},
 282 };
 283 #endif /* CONFIG_SUSPEND */
 284
 285 #ifdef CONFIG_HIBERNATION
 286 static int acpi_hibernation_begin(void)
 287 {
 288         int error;
 289
 290         acpi_target_sleep_state = ACPI_STATE_S4;
 291         if (new_pts_ordering)
 292                 return 0;
 293
 294         error = acpi_sleep_prepare(ACPI_STATE_S4);
 295         if (error)
 296                 acpi_target_sleep_state = ACPI_STATE_S0;
 297         else
 298                 acpi_sleep_finish_wake_up = true;
 299
 300         return error;
 301 }
 302
 303 static int acpi_hibernation_prepare(void)
 304 {
 305         if (new_pts_ordering) {
 306                 int error = acpi_sleep_prepare(ACPI_STATE_S4);
 307
 308                 if (error) {
 309                         acpi_target_sleep_state = ACPI_STATE_S0;
 310                         return error;
 311                 }
 312                 acpi_sleep_finish_wake_up = true;
 313         }
 314
 315         return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
 316 }
 317
 318 static int acpi_hibernation_enter(void)
 319 {
 320         acpi_status status = AE_OK;
 321         unsigned long flags = 0;
 322
 323         ACPI_FLUSH_CPU_CACHE();
 324
 325         local_irq_save(flags);
 326         acpi_enable_wakeup_device(ACPI_STATE_S4);
 327         /* This shouldn't return.  If it returns, we have a problem */
 328         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 329         /* Reprogram control registers and execute _BFS */
 330         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 331         local_irq_restore(flags);
 332
 333         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 334 }
 335
 336 static void acpi_hibernation_leave(void)
 337 {
 338         /*
 339          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 340          * enable it here.
 341          */
 342         acpi_enable();
 343         /* Reprogram control registers and execute _BFS */
 344         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 345 }
 346
 347 static void acpi_hibernation_finish(void)
 348 {
 349         acpi_disable_wakeup_device(ACPI_STATE_S4);
 350         acpi_leave_sleep_state(ACPI_STATE_S4);
 351
 352         /* reset firmware waking vector */
 353         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 354
 355         acpi_target_sleep_state = ACPI_STATE_S0;
 356         acpi_sleep_finish_wake_up = false;
 357 }
 358
 359 static void acpi_hibernation_end(void)
 360 {
 361         /*
 362          * This is necessary in case acpi_hibernation_finish() is not called
 363          * directly during a failing transition to the sleep state.
 364          */
 365         if (acpi_sleep_finish_wake_up)
 366                 acpi_hibernation_finish();
 367 }
 368
 369 static int acpi_hibernation_pre_restore(void)
 370 {
 371         acpi_status status;
 372
 373         status = acpi_hw_disable_all_gpes();
 374
 375         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 376 }
 377
 378 static void acpi_hibernation_restore_cleanup(void)
 379 {
 380         acpi_hw_enable_all_runtime_gpes();
 381 }
 382
 383 static struct platform_hibernation_ops acpi_hibernation_ops = {
 384         .begin = acpi_hibernation_begin,
 385         .end = acpi_hibernation_end,
 386         .pre_snapshot = acpi_hibernation_prepare,
 387         .finish = acpi_hibernation_finish,
 388         .prepare = acpi_hibernation_prepare,
 389         .enter = acpi_hibernation_enter,
 390         .leave = acpi_hibernation_leave,
 391         .pre_restore = acpi_hibernation_pre_restore,
 392         .restore_cleanup = acpi_hibernation_restore_cleanup,
 393 };
 394 #endif                          /* CONFIG_HIBERNATION */
 395
 396 int acpi_suspend(u32 acpi_state)
 397 {
 398         suspend_state_t states[] = {
 399                 [1] = PM_SUSPEND_STANDBY,
 400                 [3] = PM_SUSPEND_MEM,
 401                 [5] = PM_SUSPEND_MAX
 402         };
 403
 404         if (acpi_state < 6 && states[acpi_state])
 405                 return pm_suspend(states[acpi_state]);
 406         if (acpi_state == 4)
 407                 return hibernate();
 408         return -EINVAL;
 409 }
 410
 411 #ifdef CONFIG_PM_SLEEP
 412 /**
 413  *      acpi_pm_device_sleep_state - return preferred power state of ACPI device
 414  *              in the system sleep state given by %acpi_target_sleep_state
 415  *      @dev: device to examine
 416  *      @wake: if set, the device should be able to wake up the system
 417  *      @d_min_p: used to store the upper limit of allowed states range
 418  *      Return value: preferred power state of the device on success, -ENODEV on
 419  *              failure (ie. if there's no 'struct acpi_device' for @dev)
 420  *
 421  *      Find the lowest power (highest number) ACPI device power state that
 422  *      device @dev can be in while the system is in the sleep state represented
 423  *      by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
 424  *      able to wake up the system from this sleep state.  If @d_min_p is set,
 425  *      the highest power (lowest number) device power state of @dev allowed
 426  *      in this system sleep state is stored at the location pointed to by it.
 427  *
 428  *      The caller must ensure that @dev is valid before using this function.
 429  *      The caller is also responsible for figuring out if the device is
 430  *      supposed to be able to wake up the system and passing this information
 431  *      via @wake.
 432  */
 433
 434 int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
 435 {
 436         acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
 437         struct acpi_device *adev;
 438         char acpi_method[] = "_SxD";
 439         unsigned long d_min, d_max;
 440
 441         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
 442                 printk(KERN_DEBUG "ACPI handle has no context!\n");
 443                 return -ENODEV;
 444         }
 445
 446         acpi_method[2] = '0' + acpi_target_sleep_state;
 447         /*
 448          * If the sleep state is S0, we will return D3, but if the device has
 449          * _S0W, we will use the value from _S0W
 450          */
 451         d_min = ACPI_STATE_D0;
 452         d_max = ACPI_STATE_D3;
 453
 454         /*
 455          * If present, _SxD methods return the minimum D-state (highest power
 456          * state) we can use for the corresponding S-states.  Otherwise, the
 457          * minimum D-state is D0 (ACPI 3.x).
 458          *
 459          * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
 460          * provided -- that's our fault recovery, we ignore retval.
 461          */
 462         if (acpi_target_sleep_state > ACPI_STATE_S0)
 463                 acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
 464
 465         /*
 466          * If _PRW says we can wake up the system from the target sleep state,
 467          * the D-state returned by _SxD is sufficient for that (we assume a
 468          * wakeup-aware driver if wake is set).  Still, if _SxW exists
 469          * (ACPI 3.x), it should return the maximum (lowest power) D-state that
 470          * can wake the system.  _S0W may be valid, too.
 471          */
 472         if (acpi_target_sleep_state == ACPI_STATE_S0 ||
 473             (wake && adev->wakeup.state.enabled &&
 474              adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
 475                 acpi_status status;
 476
 477                 acpi_method[3] = 'W';
 478                 status = acpi_evaluate_integer(handle, acpi_method, NULL,
 479                                                 &d_max);
 480                 if (ACPI_FAILURE(status)) {
 481                         d_max = d_min;
 482                 } else if (d_max < d_min) {
 483                         /* Warn the user of the broken DSDT */
 484                         printk(KERN_WARNING "ACPI: Wrong value from %s\n",
 485                                 acpi_method);
 486                         /* Sanitize it */
 487                         d_min = d_max;
 488                 }
 489         }
 490
 491         if (d_min_p)
 492                 *d_min_p = d_min;
 493         return d_max;
 494 }
 495 #endif
 496
 497 static void acpi_power_off_prepare(void)
 498 {
 499         /* Prepare to power off the system */
 500         acpi_sleep_prepare(ACPI_STATE_S5);
 501         acpi_hw_disable_all_gpes();
 502 }
 503
 504 static void acpi_power_off(void)
 505 {
 506         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 507         printk("%s called\n", __func__);
 508         local_irq_disable();
 509         acpi_enable_wakeup_device(ACPI_STATE_S5);
 510         acpi_enter_sleep_state(ACPI_STATE_S5);
 511 }
 512
 513 int __init acpi_sleep_init(void)
 514 {
 515         acpi_status status;
 516         u8 type_a, type_b;
 517 #ifdef CONFIG_SUSPEND
 518         int i = 0;
 519
 520         dmi_check_system(acpisleep_dmi_table);
 521 #endif
 522
 523         if (acpi_disabled)
 524                 return 0;
 525
 526         sleep_states[ACPI_STATE_S0] = 1;
 527         printk(KERN_INFO PREFIX "(supports S0");
 528
 529 #ifdef CONFIG_SUSPEND
 530         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 531                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 532                 if (ACPI_SUCCESS(status)) {
 533                         sleep_states[i] = 1;
 534                         printk(" S%d", i);
 535                 }
 536         }
 537
 538         suspend_set_ops(&acpi_pm_ops);
 539 #endif
 540
 541 #ifdef CONFIG_HIBERNATION
 542         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 543         if (ACPI_SUCCESS(status)) {
 544                 hibernation_set_ops(&acpi_hibernation_ops);
 545                 sleep_states[ACPI_STATE_S4] = 1;
 546                 printk(" S4");
 547         }
 548 #endif
 549         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 550         if (ACPI_SUCCESS(status)) {
 551                 sleep_states[ACPI_STATE_S5] = 1;
 552                 printk(" S5");
 553                 pm_power_off_prepare = acpi_power_off_prepare;
 554                 pm_power_off = acpi_power_off;
 555         }
 556         printk(")\n");
 557         return 0;
 558 }