git.oblomov.eu Git - linux-2.6/blob - drivers/video/atmel_lcdfb.c

   1 /*
   2  *  Driver for AT91/AT32 LCD Controller
   3  *
   4  *  Copyright (C) 2007 Atmel Corporation
   5  *
   6  * This file is subject to the terms and conditions of the GNU General Public
   7  * License.  See the file COPYING in the main directory of this archive for
   8  * more details.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/clk.h>
  16 #include <linux/fb.h>
  17 #include <linux/init.h>
  18 #include <linux/delay.h>
  19 #include <linux/backlight.h>
  20
  21 #include <mach/board.h>
  22 #include <mach/cpu.h>
  23 #include <mach/gpio.h>
  24
  25 #include <video/atmel_lcdc.h>
  26
  27 #define lcdc_readl(sinfo, reg)          __raw_readl((sinfo)->mmio+(reg))
  28 #define lcdc_writel(sinfo, reg, val)    __raw_writel((val), (sinfo)->mmio+(reg))
  29
  30 /* configurable parameters */
  31 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
  32 #define ATMEL_LCDC_DMA_BURST_LEN        8
  33
  34 #if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
  35         defined(CONFIG_ARCH_AT91SAM9RL)
  36 #define ATMEL_LCDC_FIFO_SIZE            2048
  37 #else
  38 #define ATMEL_LCDC_FIFO_SIZE            512
  39 #endif
  40
  41 #if defined(CONFIG_ARCH_AT91)
  42 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  43                                          | FBINFO_PARTIAL_PAN_OK \
  44                                          | FBINFO_HWACCEL_YPAN)
  45
  46 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  47                                         struct fb_var_screeninfo *var)
  48 {
  49
  50 }
  51 #elif defined(CONFIG_AVR32)
  52 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  53                                         | FBINFO_PARTIAL_PAN_OK \
  54                                         | FBINFO_HWACCEL_XPAN \
  55                                         | FBINFO_HWACCEL_YPAN)
  56
  57 static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  58                                      struct fb_var_screeninfo *var)
  59 {
  60         u32 dma2dcfg;
  61         u32 pixeloff;
  62
  63         pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
  64
  65         dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
  66         dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
  67         lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
  68
  69         /* Update configuration */
  70         lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
  71                     lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
  72                     | ATMEL_LCDC_DMAUPDT);
  73 }
  74 #endif
  75
  76 static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
  77                 | ATMEL_LCDC_POL_POSITIVE
  78                 | ATMEL_LCDC_ENA_PWMENABLE;
  79
  80 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
  81
  82 /* some bl->props field just changed */
  83 static int atmel_bl_update_status(struct backlight_device *bl)
  84 {
  85         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
  86         int                     power = sinfo->bl_power;
  87         int                     brightness = bl->props.brightness;
  88
  89         /* REVISIT there may be a meaningful difference between
  90          * fb_blank and power ... there seem to be some cases
  91          * this doesn't handle correctly.
  92          */
  93         if (bl->props.fb_blank != sinfo->bl_power)
  94                 power = bl->props.fb_blank;
  95         else if (bl->props.power != sinfo->bl_power)
  96                 power = bl->props.power;
  97
  98         if (brightness < 0 && power == FB_BLANK_UNBLANK)
  99                 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 100         else if (power != FB_BLANK_UNBLANK)
 101                 brightness = 0;
 102
 103         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
 104         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
 105                         brightness ? contrast_ctr : 0);
 106
 107         bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
 108
 109         return 0;
 110 }
 111
 112 static int atmel_bl_get_brightness(struct backlight_device *bl)
 113 {
 114         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
 115
 116         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 117 }
 118
 119 static struct backlight_ops atmel_lcdc_bl_ops = {
 120         .update_status = atmel_bl_update_status,
 121         .get_brightness = atmel_bl_get_brightness,
 122 };
 123
 124 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 125 {
 126         struct backlight_device *bl;
 127
 128         sinfo->bl_power = FB_BLANK_UNBLANK;
 129
 130         if (sinfo->backlight)
 131                 return;
 132
 133         bl = backlight_device_register("backlight", &sinfo->pdev->dev,
 134                         sinfo, &atmel_lcdc_bl_ops);
 135         if (IS_ERR(sinfo->backlight)) {
 136                 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
 137                                 PTR_ERR(bl));
 138                 return;
 139         }
 140         sinfo->backlight = bl;
 141
 142         bl->props.power = FB_BLANK_UNBLANK;
 143         bl->props.fb_blank = FB_BLANK_UNBLANK;
 144         bl->props.max_brightness = 0xff;
 145         bl->props.brightness = atmel_bl_get_brightness(bl);
 146 }
 147
 148 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 149 {
 150         if (sinfo->backlight)
 151                 backlight_device_unregister(sinfo->backlight);
 152 }
 153
 154 #else
 155
 156 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 157 {
 158         dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
 159 }
 160
 161 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 162 {
 163 }
 164
 165 #endif
 166
 167 static void init_contrast(struct atmel_lcdfb_info *sinfo)
 168 {
 169         /* have some default contrast/backlight settings */
 170         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
 171         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 172
 173         if (sinfo->lcdcon_is_backlight)
 174                 init_backlight(sinfo);
 175 }
 176
 177
 178 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 179         .type           = FB_TYPE_PACKED_PIXELS,
 180         .visual         = FB_VISUAL_TRUECOLOR,
 181         .xpanstep       = 0,
 182         .ypanstep       = 1,
 183         .ywrapstep      = 0,
 184         .accel          = FB_ACCEL_NONE,
 185 };
 186
 187 static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 188 {
 189         unsigned long value;
 190
 191         if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
 192                 return xres;
 193
 194         value = xres;
 195         if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
 196                 /* STN display */
 197                 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
 198                         value *= 3;
 199                 }
 200                 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
 201                    || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
 202                       && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
 203                         value = DIV_ROUND_UP(value, 4);
 204                 else
 205                         value = DIV_ROUND_UP(value, 8);
 206         }
 207
 208         return value;
 209 }
 210
 211 static void atmel_lcdfb_update_dma(struct fb_info *info,
 212                                struct fb_var_screeninfo *var)
 213 {
 214         struct atmel_lcdfb_info *sinfo = info->par;
 215         struct fb_fix_screeninfo *fix = &info->fix;
 216         unsigned long dma_addr;
 217
 218         dma_addr = (fix->smem_start + var->yoffset * fix->line_length
 219                     + var->xoffset * var->bits_per_pixel / 8);
 220
 221         dma_addr &= ~3UL;
 222
 223         /* Set framebuffer DMA base address and pixel offset */
 224         lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
 225
 226         atmel_lcdfb_update_dma2d(sinfo, var);
 227 }
 228
 229 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
 230 {
 231         struct fb_info *info = sinfo->info;
 232
 233         dma_free_writecombine(info->device, info->fix.smem_len,
 234                                 info->screen_base, info->fix.smem_start);
 235 }
 236
 237 /**
 238  *      atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
 239  *      @sinfo: the frame buffer to allocate memory for
 240  */
 241 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 242 {
 243         struct fb_info *info = sinfo->info;
 244         struct fb_var_screeninfo *var = &info->var;
 245         unsigned int smem_len;
 246
 247         smem_len = (var->xres_virtual * var->yres_virtual
 248                     * ((var->bits_per_pixel + 7) / 8));
 249         info->fix.smem_len = max(smem_len, sinfo->smem_len);
 250
 251         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 252                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
 253
 254         if (!info->screen_base) {
 255                 return -ENOMEM;
 256         }
 257
 258         memset(info->screen_base, 0, info->fix.smem_len);
 259
 260         return 0;
 261 }
 262
 263 static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
 264                                                      struct fb_info *info)
 265 {
 266         struct fb_videomode varfbmode;
 267         const struct fb_videomode *fbmode = NULL;
 268
 269         fb_var_to_videomode(&varfbmode, var);
 270         fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
 271         if (fbmode)
 272                 fb_videomode_to_var(var, fbmode);
 273         return fbmode;
 274 }
 275
 276
 277 /**
 278  *      atmel_lcdfb_check_var - Validates a var passed in.
 279  *      @var: frame buffer variable screen structure
 280  *      @info: frame buffer structure that represents a single frame buffer
 281  *
 282  *      Checks to see if the hardware supports the state requested by
 283  *      var passed in. This function does not alter the hardware
 284  *      state!!!  This means the data stored in struct fb_info and
 285  *      struct atmel_lcdfb_info do not change. This includes the var
 286  *      inside of struct fb_info.  Do NOT change these. This function
 287  *      can be called on its own if we intent to only test a mode and
 288  *      not actually set it. The stuff in modedb.c is a example of
 289  *      this. If the var passed in is slightly off by what the
 290  *      hardware can support then we alter the var PASSED in to what
 291  *      we can do. If the hardware doesn't support mode change a
 292  *      -EINVAL will be returned by the upper layers. You don't need
 293  *      to implement this function then. If you hardware doesn't
 294  *      support changing the resolution then this function is not
 295  *      needed. In this case the driver would just provide a var that
 296  *      represents the static state the screen is in.
 297  *
 298  *      Returns negative errno on error, or zero on success.
 299  */
 300 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 301                              struct fb_info *info)
 302 {
 303         struct device *dev = info->device;
 304         struct atmel_lcdfb_info *sinfo = info->par;
 305         unsigned long clk_value_khz;
 306
 307         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 308
 309         dev_dbg(dev, "%s:\n", __func__);
 310
 311         if (!(var->pixclock && var->bits_per_pixel)) {
 312                 /* choose a suitable mode if possible */
 313                 if (!atmel_lcdfb_choose_mode(var, info)) {
 314                         dev_err(dev, "needed value not specified\n");
 315                         return -EINVAL;
 316                 }
 317         }
 318
 319         dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
 320         dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
 321         dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
 322         dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
 323
 324         if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
 325                 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
 326                 return -EINVAL;
 327         }
 328
 329         /* Do not allow to have real resoulution larger than virtual */
 330         if (var->xres > var->xres_virtual)
 331                 var->xres_virtual = var->xres;
 332
 333         if (var->yres > var->yres_virtual)
 334                 var->yres_virtual = var->yres;
 335
 336         /* Force same alignment for each line */
 337         var->xres = (var->xres + 3) & ~3UL;
 338         var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
 339
 340         var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
 341         var->transp.msb_right = 0;
 342         var->transp.offset = var->transp.length = 0;
 343         var->xoffset = var->yoffset = 0;
 344
 345         /* Saturate vertical and horizontal timings at maximum values */
 346         var->vsync_len = min_t(u32, var->vsync_len,
 347                         (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
 348         var->upper_margin = min_t(u32, var->upper_margin,
 349                         ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
 350         var->lower_margin = min_t(u32, var->lower_margin,
 351                         ATMEL_LCDC_VFP);
 352         var->right_margin = min_t(u32, var->right_margin,
 353                         (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
 354         var->hsync_len = min_t(u32, var->hsync_len,
 355                         (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
 356         var->left_margin = min_t(u32, var->left_margin,
 357                         ATMEL_LCDC_HBP + 1);
 358
 359         /* Some parameters can't be zero */
 360         var->vsync_len = max_t(u32, var->vsync_len, 1);
 361         var->right_margin = max_t(u32, var->right_margin, 1);
 362         var->hsync_len = max_t(u32, var->hsync_len, 1);
 363         var->left_margin = max_t(u32, var->left_margin, 1);
 364
 365         switch (var->bits_per_pixel) {
 366         case 1:
 367         case 2:
 368         case 4:
 369         case 8:
 370                 var->red.offset = var->green.offset = var->blue.offset = 0;
 371                 var->red.length = var->green.length = var->blue.length
 372                         = var->bits_per_pixel;
 373                 break;
 374         case 15:
 375         case 16:
 376                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 377                         /* RGB:565 mode */
 378                         var->red.offset = 11;
 379                         var->blue.offset = 0;
 380                         var->green.length = 6;
 381                 } else {
 382                         /* BGR:555 mode */
 383                         var->red.offset = 0;
 384                         var->blue.offset = 10;
 385                         var->green.length = 5;
 386                 }
 387                 var->green.offset = 5;
 388                 var->red.length = var->blue.length = 5;
 389                 break;
 390         case 32:
 391                 var->transp.offset = 24;
 392                 var->transp.length = 8;
 393                 /* fall through */
 394         case 24:
 395                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 396                         /* RGB:888 mode */
 397                         var->red.offset = 16;
 398                         var->blue.offset = 0;
 399                 } else {
 400                         /* BGR:888 mode */
 401                         var->red.offset = 0;
 402                         var->blue.offset = 16;
 403                 }
 404                 var->green.offset = 8;
 405                 var->red.length = var->green.length = var->blue.length = 8;
 406                 break;
 407         default:
 408                 dev_err(dev, "color depth %d not supported\n",
 409                                         var->bits_per_pixel);
 410                 return -EINVAL;
 411         }
 412
 413         return 0;
 414 }
 415
 416 /*
 417  * LCD reset sequence
 418  */
 419 static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
 420 {
 421         might_sleep();
 422
 423         /* LCD power off */
 424         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
 425
 426         /* wait for the LCDC core to become idle */
 427         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
 428                 msleep(10);
 429
 430         /* DMA disable */
 431         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
 432
 433         /* wait for DMA engine to become idle */
 434         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 435                 msleep(10);
 436
 437         /* LCD power on */
 438         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 439                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
 440
 441         /* DMA enable */
 442         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
 443 }
 444
 445 /**
 446  *      atmel_lcdfb_set_par - Alters the hardware state.
 447  *      @info: frame buffer structure that represents a single frame buffer
 448  *
 449  *      Using the fb_var_screeninfo in fb_info we set the resolution
 450  *      of the this particular framebuffer. This function alters the
 451  *      par AND the fb_fix_screeninfo stored in fb_info. It doesn't
 452  *      not alter var in fb_info since we are using that data. This
 453  *      means we depend on the data in var inside fb_info to be
 454  *      supported by the hardware.  atmel_lcdfb_check_var is always called
 455  *      before atmel_lcdfb_set_par to ensure this.  Again if you can't
 456  *      change the resolution you don't need this function.
 457  *
 458  */
 459 static int atmel_lcdfb_set_par(struct fb_info *info)
 460 {
 461         struct atmel_lcdfb_info *sinfo = info->par;
 462         unsigned long hozval_linesz;
 463         unsigned long value;
 464         unsigned long clk_value_khz;
 465         unsigned long bits_per_line;
 466
 467         might_sleep();
 468
 469         dev_dbg(info->device, "%s:\n", __func__);
 470         dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
 471                  info->var.xres, info->var.yres,
 472                  info->var.xres_virtual, info->var.yres_virtual);
 473
 474         /* Turn off the LCD controller and the DMA controller */
 475         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
 476
 477         /* Wait for the LCDC core to become idle */
 478         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
 479                 msleep(10);
 480
 481         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
 482
 483         if (info->var.bits_per_pixel == 1)
 484                 info->fix.visual = FB_VISUAL_MONO01;
 485         else if (info->var.bits_per_pixel <= 8)
 486                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 487         else
 488                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 489
 490         bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
 491         info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
 492
 493         /* Re-initialize the DMA engine... */
 494         dev_dbg(info->device, "  * update DMA engine\n");
 495         atmel_lcdfb_update_dma(info, &info->var);
 496
 497         /* ...set frame size and burst length = 8 words (?) */
 498         value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
 499         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
 500         lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
 501
 502         /* Now, the LCDC core... */
 503
 504         /* Set pixel clock */
 505         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 506
 507         value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
 508
 509         if (value < 2) {
 510                 dev_notice(info->device, "Bypassing pixel clock divider\n");
 511                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
 512         } else {
 513                 value = (value / 2) - 1;
 514                 dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n",
 515                                 value);
 516                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
 517                                 value << ATMEL_LCDC_CLKVAL_OFFSET);
 518                 info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
 519                 dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
 520                                         PICOS2KHZ(info->var.pixclock));
 521         }
 522
 523
 524         /* Initialize control register 2 */
 525         value = sinfo->default_lcdcon2;
 526
 527         if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 528                 value |= ATMEL_LCDC_INVLINE_INVERTED;
 529         if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 530                 value |= ATMEL_LCDC_INVFRAME_INVERTED;
 531
 532         switch (info->var.bits_per_pixel) {
 533                 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
 534                 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
 535                 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
 536                 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
 537                 case 15: /* fall through */
 538                 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
 539                 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
 540                 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
 541                 default: BUG(); break;
 542         }
 543         dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
 544         lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
 545
 546         /* Vertical timing */
 547         value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
 548         value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
 549         value |= info->var.lower_margin;
 550         dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
 551         lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
 552
 553         /* Horizontal timing */
 554         value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 555         value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 556         value |= (info->var.left_margin - 1);
 557         dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
 558         lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
 559
 560         /* Horizontal value (aka line size) */
 561         hozval_linesz = compute_hozval(info->var.xres,
 562                                         lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
 563
 564         /* Display size */
 565         value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
 566         value |= info->var.yres - 1;
 567         dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
 568         lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
 569
 570         /* FIFO Threshold: Use formula from data sheet */
 571         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
 572         lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
 573
 574         /* Toggle LCD_MODE every frame */
 575         lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
 576
 577         /* Disable all interrupts */
 578         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
 579         /* Enable FIFO & DMA errors */
 580         lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
 581
 582         /* ...wait for DMA engine to become idle... */
 583         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 584                 msleep(10);
 585
 586         dev_dbg(info->device, "  * re-enable DMA engine\n");
 587         /* ...and enable it with updated configuration */
 588         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
 589
 590         dev_dbg(info->device, "  * re-enable LCDC core\n");
 591         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 592                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
 593
 594         dev_dbg(info->device, "  * DONE\n");
 595
 596         return 0;
 597 }
 598
 599 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
 600 {
 601         chan &= 0xffff;
 602         chan >>= 16 - bf->length;
 603         return chan << bf->offset;
 604 }
 605
 606 /**
 607  *      atmel_lcdfb_setcolreg - Optional function. Sets a color register.
 608  *      @regno: Which register in the CLUT we are programming
 609  *      @red: The red value which can be up to 16 bits wide
 610  *      @green: The green value which can be up to 16 bits wide
 611  *      @blue:  The blue value which can be up to 16 bits wide.
 612  *      @transp: If supported the alpha value which can be up to 16 bits wide.
 613  *      @info: frame buffer info structure
 614  *
 615  *      Set a single color register. The values supplied have a 16 bit
 616  *      magnitude which needs to be scaled in this function for the hardware.
 617  *      Things to take into consideration are how many color registers, if
 618  *      any, are supported with the current color visual. With truecolor mode
 619  *      no color palettes are supported. Here a psuedo palette is created
 620  *      which we store the value in pseudo_palette in struct fb_info. For
 621  *      pseudocolor mode we have a limited color palette. To deal with this
 622  *      we can program what color is displayed for a particular pixel value.
 623  *      DirectColor is similar in that we can program each color field. If
 624  *      we have a static colormap we don't need to implement this function.
 625  *
 626  *      Returns negative errno on error, or zero on success. In an
 627  *      ideal world, this would have been the case, but as it turns
 628  *      out, the other drivers return 1 on failure, so that's what
 629  *      we're going to do.
 630  */
 631 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 632                              unsigned int green, unsigned int blue,
 633                              unsigned int transp, struct fb_info *info)
 634 {
 635         struct atmel_lcdfb_info *sinfo = info->par;
 636         unsigned int val;
 637         u32 *pal;
 638         int ret = 1;
 639
 640         if (info->var.grayscale)
 641                 red = green = blue = (19595 * red + 38470 * green
 642                                       + 7471 * blue) >> 16;
 643
 644         switch (info->fix.visual) {
 645         case FB_VISUAL_TRUECOLOR:
 646                 if (regno < 16) {
 647                         pal = info->pseudo_palette;
 648
 649                         val  = chan_to_field(red, &info->var.red);
 650                         val |= chan_to_field(green, &info->var.green);
 651                         val |= chan_to_field(blue, &info->var.blue);
 652
 653                         pal[regno] = val;
 654                         ret = 0;
 655                 }
 656                 break;
 657
 658         case FB_VISUAL_PSEUDOCOLOR:
 659                 if (regno < 256) {
 660                         val  = ((red   >> 11) & 0x001f);
 661                         val |= ((green >>  6) & 0x03e0);
 662                         val |= ((blue  >>  1) & 0x7c00);
 663
 664                         /*
 665                          * TODO: intensity bit. Maybe something like
 666                          *   ~(red[10] ^ green[10] ^ blue[10]) & 1
 667                          */
 668
 669                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 670                         ret = 0;
 671                 }
 672                 break;
 673
 674         case FB_VISUAL_MONO01:
 675                 if (regno < 2) {
 676                         val = (regno == 0) ? 0x00 : 0x1F;
 677                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 678                         ret = 0;
 679                 }
 680                 break;
 681
 682         }
 683
 684         return ret;
 685 }
 686
 687 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
 688                                struct fb_info *info)
 689 {
 690         dev_dbg(info->device, "%s\n", __func__);
 691
 692         atmel_lcdfb_update_dma(info, var);
 693
 694         return 0;
 695 }
 696
 697 static struct fb_ops atmel_lcdfb_ops = {
 698         .owner          = THIS_MODULE,
 699         .fb_check_var   = atmel_lcdfb_check_var,
 700         .fb_set_par     = atmel_lcdfb_set_par,
 701         .fb_setcolreg   = atmel_lcdfb_setcolreg,
 702         .fb_pan_display = atmel_lcdfb_pan_display,
 703         .fb_fillrect    = cfb_fillrect,
 704         .fb_copyarea    = cfb_copyarea,
 705         .fb_imageblit   = cfb_imageblit,
 706 };
 707
 708 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
 709 {
 710         struct fb_info *info = dev_id;
 711         struct atmel_lcdfb_info *sinfo = info->par;
 712         u32 status;
 713
 714         status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
 715         if (status & ATMEL_LCDC_UFLWI) {
 716                 dev_warn(info->device, "FIFO underflow %#x\n", status);
 717                 /* reset DMA and FIFO to avoid screen shifting */
 718                 schedule_work(&sinfo->task);
 719         }
 720         lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
 721         return IRQ_HANDLED;
 722 }
 723
 724 /*
 725  * LCD controller task (to reset the LCD)
 726  */
 727 static void atmel_lcdfb_task(struct work_struct *work)
 728 {
 729         struct atmel_lcdfb_info *sinfo =
 730                 container_of(work, struct atmel_lcdfb_info, task);
 731
 732         atmel_lcdfb_reset(sinfo);
 733 }
 734
 735 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
 736 {
 737         struct fb_info *info = sinfo->info;
 738         int ret = 0;
 739
 740         info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
 741
 742         dev_info(info->device,
 743                "%luKiB frame buffer at %08lx (mapped at %p)\n",
 744                (unsigned long)info->fix.smem_len / 1024,
 745                (unsigned long)info->fix.smem_start,
 746                info->screen_base);
 747
 748         /* Allocate colormap */
 749         ret = fb_alloc_cmap(&info->cmap, 256, 0);
 750         if (ret < 0)
 751                 dev_err(info->device, "Alloc color map failed\n");
 752
 753         return ret;
 754 }
 755
 756 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
 757 {
 758         if (sinfo->bus_clk)
 759                 clk_enable(sinfo->bus_clk);
 760         clk_enable(sinfo->lcdc_clk);
 761 }
 762
 763 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
 764 {
 765         if (sinfo->bus_clk)
 766                 clk_disable(sinfo->bus_clk);
 767         clk_disable(sinfo->lcdc_clk);
 768 }
 769
 770
 771 static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 772 {
 773         struct device *dev = &pdev->dev;
 774         struct fb_info *info;
 775         struct atmel_lcdfb_info *sinfo;
 776         struct atmel_lcdfb_info *pdata_sinfo;
 777         struct fb_videomode fbmode;
 778         struct resource *regs = NULL;
 779         struct resource *map = NULL;
 780         int ret;
 781
 782         dev_dbg(dev, "%s BEGIN\n", __func__);
 783
 784         ret = -ENOMEM;
 785         info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
 786         if (!info) {
 787                 dev_err(dev, "cannot allocate memory\n");
 788                 goto out;
 789         }
 790
 791         sinfo = info->par;
 792
 793         if (dev->platform_data) {
 794                 pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
 795                 sinfo->default_bpp = pdata_sinfo->default_bpp;
 796                 sinfo->default_dmacon = pdata_sinfo->default_dmacon;
 797                 sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
 798                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 799                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 800                 sinfo->guard_time = pdata_sinfo->guard_time;
 801                 sinfo->smem_len = pdata_sinfo->smem_len;
 802                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 803                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 804         } else {
 805                 dev_err(dev, "cannot get default configuration\n");
 806                 goto free_info;
 807         }
 808         sinfo->info = info;
 809         sinfo->pdev = pdev;
 810
 811         strcpy(info->fix.id, sinfo->pdev->name);
 812         info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
 813         info->pseudo_palette = sinfo->pseudo_palette;
 814         info->fbops = &atmel_lcdfb_ops;
 815
 816         memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
 817         info->fix = atmel_lcdfb_fix;
 818
 819         /* Enable LCDC Clocks */
 820         if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
 821                 sinfo->bus_clk = clk_get(dev, "hck1");
 822                 if (IS_ERR(sinfo->bus_clk)) {
 823                         ret = PTR_ERR(sinfo->bus_clk);
 824                         goto free_info;
 825                 }
 826         }
 827         sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
 828         if (IS_ERR(sinfo->lcdc_clk)) {
 829                 ret = PTR_ERR(sinfo->lcdc_clk);
 830                 goto put_bus_clk;
 831         }
 832         atmel_lcdfb_start_clock(sinfo);
 833
 834         ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
 835                         info->monspecs.modedb_len, info->monspecs.modedb,
 836                         sinfo->default_bpp);
 837         if (!ret) {
 838                 dev_err(dev, "no suitable video mode found\n");
 839                 goto stop_clk;
 840         }
 841
 842
 843         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 844         if (!regs) {
 845                 dev_err(dev, "resources unusable\n");
 846                 ret = -ENXIO;
 847                 goto stop_clk;
 848         }
 849
 850         sinfo->irq_base = platform_get_irq(pdev, 0);
 851         if (sinfo->irq_base < 0) {
 852                 dev_err(dev, "unable to get irq\n");
 853                 ret = sinfo->irq_base;
 854                 goto stop_clk;
 855         }
 856
 857         /* Initialize video memory */
 858         map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 859         if (map) {
 860                 /* use a pre-allocated memory buffer */
 861                 info->fix.smem_start = map->start;
 862                 info->fix.smem_len = map->end - map->start + 1;
 863                 if (!request_mem_region(info->fix.smem_start,
 864                                         info->fix.smem_len, pdev->name)) {
 865                         ret = -EBUSY;
 866                         goto stop_clk;
 867                 }
 868
 869                 info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 870                 if (!info->screen_base)
 871                         goto release_intmem;
 872
 873                 /*
 874                  * Don't clear the framebuffer -- someone may have set
 875                  * up a splash image.
 876                  */
 877         } else {
 878                 /* alocate memory buffer */
 879                 ret = atmel_lcdfb_alloc_video_memory(sinfo);
 880                 if (ret < 0) {
 881                         dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
 882                         goto stop_clk;
 883                 }
 884         }
 885
 886         /* LCDC registers */
 887         info->fix.mmio_start = regs->start;
 888         info->fix.mmio_len = regs->end - regs->start + 1;
 889
 890         if (!request_mem_region(info->fix.mmio_start,
 891                                 info->fix.mmio_len, pdev->name)) {
 892                 ret = -EBUSY;
 893                 goto free_fb;
 894         }
 895
 896         sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
 897         if (!sinfo->mmio) {
 898                 dev_err(dev, "cannot map LCDC registers\n");
 899                 goto release_mem;
 900         }
 901
 902         /* Initialize PWM for contrast or backlight ("off") */
 903         init_contrast(sinfo);
 904
 905         /* interrupt */
 906         ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
 907         if (ret) {
 908                 dev_err(dev, "request_irq failed: %d\n", ret);
 909                 goto unmap_mmio;
 910         }
 911
 912         /* Some operations on the LCDC might sleep and
 913          * require a preemptible task context */
 914         INIT_WORK(&sinfo->task, atmel_lcdfb_task);
 915
 916         ret = atmel_lcdfb_init_fbinfo(sinfo);
 917         if (ret < 0) {
 918                 dev_err(dev, "init fbinfo failed: %d\n", ret);
 919                 goto unregister_irqs;
 920         }
 921
 922         /*
 923          * This makes sure that our colour bitfield
 924          * descriptors are correctly initialised.
 925          */
 926         atmel_lcdfb_check_var(&info->var, info);
 927
 928         ret = fb_set_var(info, &info->var);
 929         if (ret) {
 930                 dev_warn(dev, "unable to set display parameters\n");
 931                 goto free_cmap;
 932         }
 933
 934         dev_set_drvdata(dev, info);
 935
 936         /*
 937          * Tell the world that we're ready to go
 938          */
 939         ret = register_framebuffer(info);
 940         if (ret < 0) {
 941                 dev_err(dev, "failed to register framebuffer device: %d\n", ret);
 942                 goto reset_drvdata;
 943         }
 944
 945         /* add selected videomode to modelist */
 946         fb_var_to_videomode(&fbmode, &info->var);
 947         fb_add_videomode(&fbmode, &info->modelist);
 948
 949         /* Power up the LCDC screen */
 950         if (sinfo->atmel_lcdfb_power_control)
 951                 sinfo->atmel_lcdfb_power_control(1);
 952
 953         dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
 954                        info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
 955
 956         return 0;
 957
 958 reset_drvdata:
 959         dev_set_drvdata(dev, NULL);
 960 free_cmap:
 961         fb_dealloc_cmap(&info->cmap);
 962 unregister_irqs:
 963         cancel_work_sync(&sinfo->task);
 964         free_irq(sinfo->irq_base, info);
 965 unmap_mmio:
 966         exit_backlight(sinfo);
 967         iounmap(sinfo->mmio);
 968 release_mem:
 969         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
 970 free_fb:
 971         if (map)
 972                 iounmap(info->screen_base);
 973         else
 974                 atmel_lcdfb_free_video_memory(sinfo);
 975
 976 release_intmem:
 977         if (map)
 978                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
 979 stop_clk:
 980         atmel_lcdfb_stop_clock(sinfo);
 981         clk_put(sinfo->lcdc_clk);
 982 put_bus_clk:
 983         if (sinfo->bus_clk)
 984                 clk_put(sinfo->bus_clk);
 985 free_info:
 986         framebuffer_release(info);
 987 out:
 988         dev_dbg(dev, "%s FAILED\n", __func__);
 989         return ret;
 990 }
 991
 992 static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 993 {
 994         struct device *dev = &pdev->dev;
 995         struct fb_info *info = dev_get_drvdata(dev);
 996         struct atmel_lcdfb_info *sinfo;
 997
 998         if (!info || !info->par)
 999                 return 0;
1000         sinfo = info->par;
1001
1002         cancel_work_sync(&sinfo->task);
1003         exit_backlight(sinfo);
1004         if (sinfo->atmel_lcdfb_power_control)
1005                 sinfo->atmel_lcdfb_power_control(0);
1006         unregister_framebuffer(info);
1007         atmel_lcdfb_stop_clock(sinfo);
1008         clk_put(sinfo->lcdc_clk);
1009         if (sinfo->bus_clk)
1010                 clk_put(sinfo->bus_clk);
1011         fb_dealloc_cmap(&info->cmap);
1012         free_irq(sinfo->irq_base, info);
1013         iounmap(sinfo->mmio);
1014         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
1015         if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
1016                 iounmap(info->screen_base);
1017                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
1018         } else {
1019                 atmel_lcdfb_free_video_memory(sinfo);
1020         }
1021
1022         dev_set_drvdata(dev, NULL);
1023         framebuffer_release(info);
1024
1025         return 0;
1026 }
1027
1028 #ifdef CONFIG_PM
1029
1030 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
1031 {
1032         struct fb_info *info = platform_get_drvdata(pdev);
1033         struct atmel_lcdfb_info *sinfo = info->par;
1034
1035         sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
1036         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
1037         if (sinfo->atmel_lcdfb_power_control)
1038                 sinfo->atmel_lcdfb_power_control(0);
1039         atmel_lcdfb_stop_clock(sinfo);
1040         return 0;
1041 }
1042
1043 static int atmel_lcdfb_resume(struct platform_device *pdev)
1044 {
1045         struct fb_info *info = platform_get_drvdata(pdev);
1046         struct atmel_lcdfb_info *sinfo = info->par;
1047
1048         atmel_lcdfb_start_clock(sinfo);
1049         if (sinfo->atmel_lcdfb_power_control)
1050                 sinfo->atmel_lcdfb_power_control(1);
1051         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
1052         return 0;
1053 }
1054
1055 #else
1056 #define atmel_lcdfb_suspend     NULL
1057 #define atmel_lcdfb_resume      NULL
1058 #endif
1059
1060 static struct platform_driver atmel_lcdfb_driver = {
1061         .remove         = __exit_p(atmel_lcdfb_remove),
1062         .suspend        = atmel_lcdfb_suspend,
1063         .resume         = atmel_lcdfb_resume,
1064
1065         .driver         = {
1066                 .name   = "atmel_lcdfb",
1067                 .owner  = THIS_MODULE,
1068         },
1069 };
1070
1071 static int __init atmel_lcdfb_init(void)
1072 {
1073         return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
1074 }
1075
1076 static void __exit atmel_lcdfb_exit(void)
1077 {
1078         platform_driver_unregister(&atmel_lcdfb_driver);
1079 }
1080
1081 module_init(atmel_lcdfb_init);
1082 module_exit(atmel_lcdfb_exit);
1083
1084 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
1085 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
1086 MODULE_LICENSE("GPL");