p54: Use SKB list handling helpers instead of by-hand code.
[linux-2.6] / drivers / usb / host / ohci-sa1111.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6  * (C) Copyright 2002 Hewlett-Packard Company
7  *
8  * SA1111 Bus Glue
9  *
10  * Written by Christopher Hoover <ch@hpl.hp.com>
11  * Based on fragments of previous driver by Russell King et al.
12  *
13  * This file is licenced under the GPL.
14  */
15
16 #include <mach/hardware.h>
17 #include <asm/mach-types.h>
18 #include <mach/assabet.h>
19 #include <mach/badge4.h>
20 #include <asm/hardware/sa1111.h>
21
22 #ifndef CONFIG_SA1111
23 #error "This file is SA-1111 bus glue.  CONFIG_SA1111 must be defined."
24 #endif
25
26 extern int usb_disabled(void);
27
28 /*-------------------------------------------------------------------------*/
29
30 static void sa1111_start_hc(struct sa1111_dev *dev)
31 {
32         unsigned int usb_rst = 0;
33
34         printk(KERN_DEBUG __FILE__
35                ": starting SA-1111 OHCI USB Controller\n");
36
37 #ifdef CONFIG_SA1100_BADGE4
38         if (machine_is_badge4()) {
39                 badge4_set_5V(BADGE4_5V_USB, 1);
40         }
41 #endif
42
43         if (machine_is_xp860() ||
44             machine_has_neponset() ||
45             machine_is_pfs168() ||
46             machine_is_badge4())
47                 usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
48
49         /*
50          * Configure the power sense and control lines.  Place the USB
51          * host controller in reset.
52          */
53         sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
54                       dev->mapbase + SA1111_USB_RESET);
55
56         /*
57          * Now, carefully enable the USB clock, and take
58          * the USB host controller out of reset.
59          */
60         sa1111_enable_device(dev);
61         udelay(11);
62         sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
63 }
64
65 static void sa1111_stop_hc(struct sa1111_dev *dev)
66 {
67         unsigned int usb_rst;
68         printk(KERN_DEBUG __FILE__
69                ": stopping SA-1111 OHCI USB Controller\n");
70
71         /*
72          * Put the USB host controller into reset.
73          */
74         usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
75         sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
76                       dev->mapbase + SA1111_USB_RESET);
77
78         /*
79          * Stop the USB clock.
80          */
81         sa1111_disable_device(dev);
82
83 #ifdef CONFIG_SA1100_BADGE4
84         if (machine_is_badge4()) {
85                 /* Disable power to the USB bus */
86                 badge4_set_5V(BADGE4_5V_USB, 0);
87         }
88 #endif
89 }
90
91
92 /*-------------------------------------------------------------------------*/
93
94 #if 0
95 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
96 {
97         unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
98
99         dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
100              ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
101              ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
102              ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
103              ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
104              ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
105 }
106 #endif
107
108 /*-------------------------------------------------------------------------*/
109
110 /* configure so an HC device and id are always provided */
111 /* always called with process context; sleeping is OK */
112
113
114 /**
115  * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
116  * Context: !in_interrupt()
117  *
118  * Allocates basic resources for this USB host controller, and
119  * then invokes the start() method for the HCD associated with it
120  * through the hotplug entry's driver_data.
121  *
122  * Store this function in the HCD's struct pci_driver as probe().
123  */
124 int usb_hcd_sa1111_probe (const struct hc_driver *driver,
125                           struct sa1111_dev *dev)
126 {
127         struct usb_hcd *hcd;
128         int retval;
129
130         hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
131         if (!hcd)
132                 return -ENOMEM;
133         hcd->rsrc_start = dev->res.start;
134         hcd->rsrc_len = dev->res.end - dev->res.start + 1;
135
136         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
137                 dbg("request_mem_region failed");
138                 retval = -EBUSY;
139                 goto err1;
140         }
141         hcd->regs = dev->mapbase;
142
143         sa1111_start_hc(dev);
144         ohci_hcd_init(hcd_to_ohci(hcd));
145
146         retval = usb_add_hcd(hcd, dev->irq[1], IRQF_DISABLED);
147         if (retval == 0)
148                 return retval;
149
150         sa1111_stop_hc(dev);
151         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
152  err1:
153         usb_put_hcd(hcd);
154         return retval;
155 }
156
157
158 /* may be called without controller electrically present */
159 /* may be called with controller, bus, and devices active */
160
161 /**
162  * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
163  * @dev: USB Host Controller being removed
164  * Context: !in_interrupt()
165  *
166  * Reverses the effect of usb_hcd_sa1111_probe(), first invoking
167  * the HCD's stop() method.  It is always called from a thread
168  * context, normally "rmmod", "apmd", or something similar.
169  *
170  */
171 void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
172 {
173         usb_remove_hcd(hcd);
174         sa1111_stop_hc(dev);
175         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
176         usb_put_hcd(hcd);
177 }
178
179 /*-------------------------------------------------------------------------*/
180
181 static int __devinit
182 ohci_sa1111_start (struct usb_hcd *hcd)
183 {
184         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
185         int             ret;
186
187         if ((ret = ohci_init(ohci)) < 0)
188                 return ret;
189
190         if ((ret = ohci_run (ohci)) < 0) {
191                 err ("can't start %s", hcd->self.bus_name);
192                 ohci_stop (hcd);
193                 return ret;
194         }
195         return 0;
196 }
197
198 /*-------------------------------------------------------------------------*/
199
200 static const struct hc_driver ohci_sa1111_hc_driver = {
201         .description =          hcd_name,
202         .product_desc =         "SA-1111 OHCI",
203         .hcd_priv_size =        sizeof(struct ohci_hcd),
204
205         /*
206          * generic hardware linkage
207          */
208         .irq =                  ohci_irq,
209         .flags =                HCD_USB11 | HCD_MEMORY,
210
211         /*
212          * basic lifecycle operations
213          */
214         .start =                ohci_sa1111_start,
215         .stop =                 ohci_stop,
216
217         /*
218          * managing i/o requests and associated device resources
219          */
220         .urb_enqueue =          ohci_urb_enqueue,
221         .urb_dequeue =          ohci_urb_dequeue,
222         .endpoint_disable =     ohci_endpoint_disable,
223
224         /*
225          * scheduling support
226          */
227         .get_frame_number =     ohci_get_frame,
228
229         /*
230          * root hub support
231          */
232         .hub_status_data =      ohci_hub_status_data,
233         .hub_control =          ohci_hub_control,
234 #ifdef  CONFIG_PM
235         .bus_suspend =          ohci_bus_suspend,
236         .bus_resume =           ohci_bus_resume,
237 #endif
238         .start_port_reset =     ohci_start_port_reset,
239 };
240
241 /*-------------------------------------------------------------------------*/
242
243 static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
244 {
245         int ret;
246
247         if (usb_disabled())
248                 return -ENODEV;
249
250         ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
251         return ret;
252 }
253
254 static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
255 {
256         struct usb_hcd *hcd = sa1111_get_drvdata(dev);
257
258         usb_hcd_sa1111_remove(hcd, dev);
259         return 0;
260 }
261
262 static struct sa1111_driver ohci_hcd_sa1111_driver = {
263         .drv = {
264                 .name   = "sa1111-ohci",
265         },
266         .devid          = SA1111_DEVID_USB,
267         .probe          = ohci_hcd_sa1111_drv_probe,
268         .remove         = ohci_hcd_sa1111_drv_remove,
269 };
270