git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/iwlwifi/iwl-3945.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/delay.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/wireless.h>
  36 #include <linux/firmware.h>
  37 #include <linux/etherdevice.h>
  38 #include <asm/unaligned.h>
  39 #include <net/mac80211.h>
  40
  41 #include "iwl-3945-core.h"
  42 #include "iwl-3945.h"
  43 #include "iwl-helpers.h"
  44 #include "iwl-3945-rs.h"
  45
  46 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
  47         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
  48                                     IWL_RATE_##r##M_IEEE,   \
  49                                     IWL_RATE_##ip##M_INDEX, \
  50                                     IWL_RATE_##in##M_INDEX, \
  51                                     IWL_RATE_##rp##M_INDEX, \
  52                                     IWL_RATE_##rn##M_INDEX, \
  53                                     IWL_RATE_##pp##M_INDEX, \
  54                                     IWL_RATE_##np##M_INDEX, \
  55                                     IWL_RATE_##r##M_INDEX_TABLE, \
  56                                     IWL_RATE_##ip##M_INDEX_TABLE }
  57
  58 /*
  59  * Parameter order:
  60  *   rate, prev rate, next rate, prev tgg rate, next tgg rate
  61  *
  62  * If there isn't a valid next or previous rate then INV is used which
  63  * maps to IWL_RATE_INVALID
  64  *
  65  */
  66 const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT] = {
  67         IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
  68         IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
  69         IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
  70         IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
  71         IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
  72         IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
  73         IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
  74         IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
  75         IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
  76         IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
  77         IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
  78         IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  79 };
  80
  81 /* 1 = enable the iwl3945_disable_events() function */
  82 #define IWL_EVT_DISABLE (0)
  83 #define IWL_EVT_DISABLE_SIZE (1532/32)
  84
  85 /**
  86  * iwl3945_disable_events - Disable selected events in uCode event log
  87  *
  88  * Disable an event by writing "1"s into "disable"
  89  *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
  90  *   Default values of 0 enable uCode events to be logged.
  91  * Use for only special debugging.  This function is just a placeholder as-is,
  92  *   you'll need to provide the special bits! ...
  93  *   ... and set IWL_EVT_DISABLE to 1. */
  94 void iwl3945_disable_events(struct iwl3945_priv *priv)
  95 {
  96         int ret;
  97         int i;
  98         u32 base;               /* SRAM address of event log header */
  99         u32 disable_ptr;        /* SRAM address of event-disable bitmap array */
 100         u32 array_size;         /* # of u32 entries in array */
 101         u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
 102                 0x00000000,     /*   31 -    0  Event id numbers */
 103                 0x00000000,     /*   63 -   32 */
 104                 0x00000000,     /*   95 -   64 */
 105                 0x00000000,     /*  127 -   96 */
 106                 0x00000000,     /*  159 -  128 */
 107                 0x00000000,     /*  191 -  160 */
 108                 0x00000000,     /*  223 -  192 */
 109                 0x00000000,     /*  255 -  224 */
 110                 0x00000000,     /*  287 -  256 */
 111                 0x00000000,     /*  319 -  288 */
 112                 0x00000000,     /*  351 -  320 */
 113                 0x00000000,     /*  383 -  352 */
 114                 0x00000000,     /*  415 -  384 */
 115                 0x00000000,     /*  447 -  416 */
 116                 0x00000000,     /*  479 -  448 */
 117                 0x00000000,     /*  511 -  480 */
 118                 0x00000000,     /*  543 -  512 */
 119                 0x00000000,     /*  575 -  544 */
 120                 0x00000000,     /*  607 -  576 */
 121                 0x00000000,     /*  639 -  608 */
 122                 0x00000000,     /*  671 -  640 */
 123                 0x00000000,     /*  703 -  672 */
 124                 0x00000000,     /*  735 -  704 */
 125                 0x00000000,     /*  767 -  736 */
 126                 0x00000000,     /*  799 -  768 */
 127                 0x00000000,     /*  831 -  800 */
 128                 0x00000000,     /*  863 -  832 */
 129                 0x00000000,     /*  895 -  864 */
 130                 0x00000000,     /*  927 -  896 */
 131                 0x00000000,     /*  959 -  928 */
 132                 0x00000000,     /*  991 -  960 */
 133                 0x00000000,     /* 1023 -  992 */
 134                 0x00000000,     /* 1055 - 1024 */
 135                 0x00000000,     /* 1087 - 1056 */
 136                 0x00000000,     /* 1119 - 1088 */
 137                 0x00000000,     /* 1151 - 1120 */
 138                 0x00000000,     /* 1183 - 1152 */
 139                 0x00000000,     /* 1215 - 1184 */
 140                 0x00000000,     /* 1247 - 1216 */
 141                 0x00000000,     /* 1279 - 1248 */
 142                 0x00000000,     /* 1311 - 1280 */
 143                 0x00000000,     /* 1343 - 1312 */
 144                 0x00000000,     /* 1375 - 1344 */
 145                 0x00000000,     /* 1407 - 1376 */
 146                 0x00000000,     /* 1439 - 1408 */
 147                 0x00000000,     /* 1471 - 1440 */
 148                 0x00000000,     /* 1503 - 1472 */
 149         };
 150
 151         base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 152         if (!iwl3945_hw_valid_rtc_data_addr(base)) {
 153                 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
 154                 return;
 155         }
 156
 157         ret = iwl3945_grab_nic_access(priv);
 158         if (ret) {
 159                 IWL_WARNING("Can not read from adapter at this time.\n");
 160                 return;
 161         }
 162
 163         disable_ptr = iwl3945_read_targ_mem(priv, base + (4 * sizeof(u32)));
 164         array_size = iwl3945_read_targ_mem(priv, base + (5 * sizeof(u32)));
 165         iwl3945_release_nic_access(priv);
 166
 167         if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
 168                 IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n",
 169                                disable_ptr);
 170                 ret = iwl3945_grab_nic_access(priv);
 171                 for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
 172                         iwl3945_write_targ_mem(priv,
 173                                            disable_ptr + (i * sizeof(u32)),
 174                                            evt_disable[i]);
 175
 176                 iwl3945_release_nic_access(priv);
 177         } else {
 178                 IWL_DEBUG_INFO("Selected uCode log events may be disabled\n");
 179                 IWL_DEBUG_INFO("  by writing \"1\"s into disable bitmap\n");
 180                 IWL_DEBUG_INFO("  in SRAM at 0x%x, size %d u32s\n",
 181                                disable_ptr, array_size);
 182         }
 183
 184 }
 185
 186 static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 187 {
 188         int idx;
 189
 190         for (idx = 0; idx < IWL_RATE_COUNT; idx++)
 191                 if (iwl3945_rates[idx].plcp == plcp)
 192                         return idx;
 193         return -1;
 194 }
 195
 196 /**
 197  * iwl3945_get_antenna_flags - Get antenna flags for RXON command
 198  * @priv: eeprom and antenna fields are used to determine antenna flags
 199  *
 200  * priv->eeprom  is used to determine if antenna AUX/MAIN are reversed
 201  * priv->antenna specifies the antenna diversity mode:
 202  *
 203  * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
 204  * IWL_ANTENNA_MAIN      - Force MAIN antenna
 205  * IWL_ANTENNA_AUX       - Force AUX antenna
 206  */
 207 __le32 iwl3945_get_antenna_flags(const struct iwl3945_priv *priv)
 208 {
 209         switch (priv->antenna) {
 210         case IWL_ANTENNA_DIVERSITY:
 211                 return 0;
 212
 213         case IWL_ANTENNA_MAIN:
 214                 if (priv->eeprom.antenna_switch_type)
 215                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
 216                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
 217
 218         case IWL_ANTENNA_AUX:
 219                 if (priv->eeprom.antenna_switch_type)
 220                         return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
 221                 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
 222         }
 223
 224         /* bad antenna selector value */
 225         IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna);
 226         return 0;               /* "diversity" is default if error */
 227 }
 228
 229 #ifdef CONFIG_IWL3945_DEBUG
 230 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
 231
 232 static const char *iwl3945_get_tx_fail_reason(u32 status)
 233 {
 234         switch (status & TX_STATUS_MSK) {
 235         case TX_STATUS_SUCCESS:
 236                 return "SUCCESS";
 237                 TX_STATUS_ENTRY(SHORT_LIMIT);
 238                 TX_STATUS_ENTRY(LONG_LIMIT);
 239                 TX_STATUS_ENTRY(FIFO_UNDERRUN);
 240                 TX_STATUS_ENTRY(MGMNT_ABORT);
 241                 TX_STATUS_ENTRY(NEXT_FRAG);
 242                 TX_STATUS_ENTRY(LIFE_EXPIRE);
 243                 TX_STATUS_ENTRY(DEST_PS);
 244                 TX_STATUS_ENTRY(ABORTED);
 245                 TX_STATUS_ENTRY(BT_RETRY);
 246                 TX_STATUS_ENTRY(STA_INVALID);
 247                 TX_STATUS_ENTRY(FRAG_DROPPED);
 248                 TX_STATUS_ENTRY(TID_DISABLE);
 249                 TX_STATUS_ENTRY(FRAME_FLUSHED);
 250                 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
 251                 TX_STATUS_ENTRY(TX_LOCKED);
 252                 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
 253         }
 254
 255         return "UNKNOWN";
 256 }
 257 #else
 258 static inline const char *iwl3945_get_tx_fail_reason(u32 status)
 259 {
 260         return "";
 261 }
 262 #endif
 263
 264 /*
 265  * get ieee prev rate from rate scale table.
 266  * for A and B mode we need to overright prev
 267  * value
 268  */
 269 int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate)
 270 {
 271         int next_rate = iwl3945_get_prev_ieee_rate(rate);
 272
 273         switch (priv->band) {
 274         case IEEE80211_BAND_5GHZ:
 275                 if (rate == IWL_RATE_12M_INDEX)
 276                         next_rate = IWL_RATE_9M_INDEX;
 277                 else if (rate == IWL_RATE_6M_INDEX)
 278                         next_rate = IWL_RATE_6M_INDEX;
 279                 break;
 280         case IEEE80211_BAND_2GHZ:
 281                 if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
 282                     iwl3945_is_associated(priv)) {
 283                         if (rate == IWL_RATE_11M_INDEX)
 284                                 next_rate = IWL_RATE_5M_INDEX;
 285                 }
 286                 break;
 287
 288         default:
 289                 break;
 290         }
 291
 292         return next_rate;
 293 }
 294
 295
 296 /**
 297  * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
 298  *
 299  * When FW advances 'R' index, all entries between old and new 'R' index
 300  * need to be reclaimed. As result, some free space forms. If there is
 301  * enough free space (> low mark), wake the stack that feeds us.
 302  */
 303 static void iwl3945_tx_queue_reclaim(struct iwl3945_priv *priv,
 304                                      int txq_id, int index)
 305 {
 306         struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
 307         struct iwl3945_queue *q = &txq->q;
 308         struct iwl3945_tx_info *tx_info;
 309
 310         BUG_ON(txq_id == IWL_CMD_QUEUE_NUM);
 311
 312         for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
 313                 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 314
 315                 tx_info = &txq->txb[txq->q.read_ptr];
 316                 ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]);
 317                 tx_info->skb[0] = NULL;
 318                 iwl3945_hw_txq_free_tfd(priv, txq);
 319         }
 320
 321         if (iwl3945_queue_space(q) > q->low_mark && (txq_id >= 0) &&
 322                         (txq_id != IWL_CMD_QUEUE_NUM) &&
 323                         priv->mac80211_registered)
 324                 ieee80211_wake_queue(priv->hw, txq_id);
 325 }
 326
 327 /**
 328  * iwl3945_rx_reply_tx - Handle Tx response
 329  */
 330 static void iwl3945_rx_reply_tx(struct iwl3945_priv *priv,
 331                             struct iwl3945_rx_mem_buffer *rxb)
 332 {
 333         struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
 334         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 335         int txq_id = SEQ_TO_QUEUE(sequence);
 336         int index = SEQ_TO_INDEX(sequence);
 337         struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
 338         struct ieee80211_tx_info *info;
 339         struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 340         u32  status = le32_to_cpu(tx_resp->status);
 341         int rate_idx;
 342         int fail;
 343
 344         if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) {
 345                 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
 346                           "is out of range [0-%d] %d %d\n", txq_id,
 347                           index, txq->q.n_bd, txq->q.write_ptr,
 348                           txq->q.read_ptr);
 349                 return;
 350         }
 351
 352         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
 353         ieee80211_tx_info_clear_status(info);
 354
 355         /* Fill the MRR chain with some info about on-chip retransmissions */
 356         rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
 357         if (info->band == IEEE80211_BAND_5GHZ)
 358                 rate_idx -= IWL_FIRST_OFDM_RATE;
 359
 360         fail = tx_resp->failure_frame;
 361
 362         info->status.rates[0].idx = rate_idx;
 363         info->status.rates[0].count = fail + 1; /* add final attempt */
 364
 365         /* tx_status->rts_retry_count = tx_resp->failure_rts; */
 366         info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
 367                                 IEEE80211_TX_STAT_ACK : 0;
 368
 369         IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
 370                         txq_id, iwl3945_get_tx_fail_reason(status), status,
 371                         tx_resp->rate, tx_resp->failure_frame);
 372
 373         IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
 374         iwl3945_tx_queue_reclaim(priv, txq_id, index);
 375
 376         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
 377                 IWL_ERROR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
 378 }
 379
 380
 381
 382 /*****************************************************************************
 383  *
 384  * Intel PRO/Wireless 3945ABG/BG Network Connection
 385  *
 386  *  RX handler implementations
 387  *
 388  *****************************************************************************/
 389
 390 void iwl3945_hw_rx_statistics(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb)
 391 {
 392         struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
 393         IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
 394                      (int)sizeof(struct iwl3945_notif_statistics),
 395                      le32_to_cpu(pkt->len));
 396
 397         memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics));
 398
 399         iwl3945_led_background(priv);
 400
 401         priv->last_statistics_time = jiffies;
 402 }
 403
 404 /******************************************************************************
 405  *
 406  * Misc. internal state and helper functions
 407  *
 408  ******************************************************************************/
 409 #ifdef CONFIG_IWL3945_DEBUG
 410
 411 /**
 412  * iwl3945_report_frame - dump frame to syslog during debug sessions
 413  *
 414  * You may hack this function to show different aspects of received frames,
 415  * including selective frame dumps.
 416  * group100 parameter selects whether to show 1 out of 100 good frames.
 417  */
 418 static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
 419                       struct iwl3945_rx_packet *pkt,
 420                       struct ieee80211_hdr *header, int group100)
 421 {
 422         u32 to_us;
 423         u32 print_summary = 0;
 424         u32 print_dump = 0;     /* set to 1 to dump all frames' contents */
 425         u32 hundred = 0;
 426         u32 dataframe = 0;
 427         __le16 fc;
 428         u16 seq_ctl;
 429         u16 channel;
 430         u16 phy_flags;
 431         u16 length;
 432         u16 status;
 433         u16 bcn_tmr;
 434         u32 tsf_low;
 435         u64 tsf;
 436         u8 rssi;
 437         u8 agc;
 438         u16 sig_avg;
 439         u16 noise_diff;
 440         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 441         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 442         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 443         u8 *data = IWL_RX_DATA(pkt);
 444
 445         /* MAC header */
 446         fc = header->frame_control;
 447         seq_ctl = le16_to_cpu(header->seq_ctrl);
 448
 449         /* metadata */
 450         channel = le16_to_cpu(rx_hdr->channel);
 451         phy_flags = le16_to_cpu(rx_hdr->phy_flags);
 452         length = le16_to_cpu(rx_hdr->len);
 453
 454         /* end-of-frame status and timestamp */
 455         status = le32_to_cpu(rx_end->status);
 456         bcn_tmr = le32_to_cpu(rx_end->beacon_timestamp);
 457         tsf_low = le64_to_cpu(rx_end->timestamp) & 0x0ffffffff;
 458         tsf = le64_to_cpu(rx_end->timestamp);
 459
 460         /* signal statistics */
 461         rssi = rx_stats->rssi;
 462         agc = rx_stats->agc;
 463         sig_avg = le16_to_cpu(rx_stats->sig_avg);
 464         noise_diff = le16_to_cpu(rx_stats->noise_diff);
 465
 466         to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
 467
 468         /* if data frame is to us and all is good,
 469          *   (optionally) print summary for only 1 out of every 100 */
 470         if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
 471             cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
 472                 dataframe = 1;
 473                 if (!group100)
 474                         print_summary = 1;      /* print each frame */
 475                 else if (priv->framecnt_to_us < 100) {
 476                         priv->framecnt_to_us++;
 477                         print_summary = 0;
 478                 } else {
 479                         priv->framecnt_to_us = 0;
 480                         print_summary = 1;
 481                         hundred = 1;
 482                 }
 483         } else {
 484                 /* print summary for all other frames */
 485                 print_summary = 1;
 486         }
 487
 488         if (print_summary) {
 489                 char *title;
 490                 int rate;
 491
 492                 if (hundred)
 493                         title = "100Frames";
 494                 else if (ieee80211_has_retry(fc))
 495                         title = "Retry";
 496                 else if (ieee80211_is_assoc_resp(fc))
 497                         title = "AscRsp";
 498                 else if (ieee80211_is_reassoc_resp(fc))
 499                         title = "RasRsp";
 500                 else if (ieee80211_is_probe_resp(fc)) {
 501                         title = "PrbRsp";
 502                         print_dump = 1; /* dump frame contents */
 503                 } else if (ieee80211_is_beacon(fc)) {
 504                         title = "Beacon";
 505                         print_dump = 1; /* dump frame contents */
 506                 } else if (ieee80211_is_atim(fc))
 507                         title = "ATIM";
 508                 else if (ieee80211_is_auth(fc))
 509                         title = "Auth";
 510                 else if (ieee80211_is_deauth(fc))
 511                         title = "DeAuth";
 512                 else if (ieee80211_is_disassoc(fc))
 513                         title = "DisAssoc";
 514                 else
 515                         title = "Frame";
 516
 517                 rate = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
 518                 if (rate == -1)
 519                         rate = 0;
 520                 else
 521                         rate = iwl3945_rates[rate].ieee / 2;
 522
 523                 /* print frame summary.
 524                  * MAC addresses show just the last byte (for brevity),
 525                  *    but you can hack it to show more, if you'd like to. */
 526                 if (dataframe)
 527                         IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
 528                                      "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
 529                                      title, le16_to_cpu(fc), header->addr1[5],
 530                                      length, rssi, channel, rate);
 531                 else {
 532                         /* src/dst addresses assume managed mode */
 533                         IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
 534                                      "src=0x%02x, rssi=%u, tim=%lu usec, "
 535                                      "phy=0x%02x, chnl=%d\n",
 536                                      title, le16_to_cpu(fc), header->addr1[5],
 537                                      header->addr3[5], rssi,
 538                                      tsf_low - priv->scan_start_tsf,
 539                                      phy_flags, channel);
 540                 }
 541         }
 542         if (print_dump)
 543                 iwl3945_print_hex_dump(IWL_DL_RX, data, length);
 544 }
 545 #else
 546 static inline void iwl3945_dbg_report_frame(struct iwl3945_priv *priv,
 547                       struct iwl3945_rx_packet *pkt,
 548                       struct ieee80211_hdr *header, int group100)
 549 {
 550 }
 551 #endif
 552
 553 /* This is necessary only for a number of statistics, see the caller. */
 554 static int iwl3945_is_network_packet(struct iwl3945_priv *priv,
 555                 struct ieee80211_hdr *header)
 556 {
 557         /* Filter incoming packets to determine if they are targeted toward
 558          * this network, discarding packets coming from ourselves */
 559         switch (priv->iw_mode) {
 560         case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source    | BSSID */
 561                 /* packets to our IBSS update information */
 562                 return !compare_ether_addr(header->addr3, priv->bssid);
 563         case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
 564                 /* packets to our IBSS update information */
 565                 return !compare_ether_addr(header->addr2, priv->bssid);
 566         default:
 567                 return 1;
 568         }
 569 }
 570
 571 static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv,
 572                                    struct iwl3945_rx_mem_buffer *rxb,
 573                                    struct ieee80211_rx_status *stats)
 574 {
 575         struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
 576 #ifdef CONFIG_IWL3945_LEDS
 577         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 578 #endif
 579         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 580         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 581         short len = le16_to_cpu(rx_hdr->len);
 582
 583         /* We received data from the HW, so stop the watchdog */
 584         if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
 585                 IWL_DEBUG_DROP("Corruption detected!\n");
 586                 return;
 587         }
 588
 589         /* We only process data packets if the interface is open */
 590         if (unlikely(!priv->is_open)) {
 591                 IWL_DEBUG_DROP_LIMIT
 592                     ("Dropping packet while interface is not open.\n");
 593                 return;
 594         }
 595
 596         skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
 597         /* Set the size of the skb to the size of the frame */
 598         skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
 599
 600         if (iwl3945_param_hwcrypto)
 601                 iwl3945_set_decrypted_flag(priv, rxb->skb,
 602                                        le32_to_cpu(rx_end->status), stats);
 603
 604 #ifdef CONFIG_IWL3945_LEDS
 605         if (ieee80211_is_data(hdr->frame_control))
 606                 priv->rxtxpackets += len;
 607 #endif
 608         ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
 609         rxb->skb = NULL;
 610 }
 611
 612 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
 613
 614 static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 615                                 struct iwl3945_rx_mem_buffer *rxb)
 616 {
 617         struct ieee80211_hdr *header;
 618         struct ieee80211_rx_status rx_status;
 619         struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
 620         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 621         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 622         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 623         int snr;
 624         u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg);
 625         u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff);
 626         u8 network_packet;
 627
 628         rx_status.flag = 0;
 629         rx_status.mactime = le64_to_cpu(rx_end->timestamp);
 630         rx_status.freq =
 631                 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel));
 632         rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
 633                                 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 634
 635         rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
 636         if (rx_status.band == IEEE80211_BAND_5GHZ)
 637                 rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
 638
 639         rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
 640                                         RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
 641
 642         /* set the preamble flag if appropriate */
 643         if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 644                 rx_status.flag |= RX_FLAG_SHORTPRE;
 645
 646         if ((unlikely(rx_stats->phy_count > 20))) {
 647                 IWL_DEBUG_DROP
 648                     ("dsp size out of range [0,20]: "
 649                      "%d/n", rx_stats->phy_count);
 650                 return;
 651         }
 652
 653         if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
 654             || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
 655                 IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
 656                 return;
 657         }
 658
 659
 660
 661         /* Convert 3945's rssi indicator to dBm */
 662         rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
 663
 664         /* Set default noise value to -127 */
 665         if (priv->last_rx_noise == 0)
 666                 priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
 667
 668         /* 3945 provides noise info for OFDM frames only.
 669          * sig_avg and noise_diff are measured by the 3945's digital signal
 670          *   processor (DSP), and indicate linear levels of signal level and
 671          *   distortion/noise within the packet preamble after
 672          *   automatic gain control (AGC).  sig_avg should stay fairly
 673          *   constant if the radio's AGC is working well.
 674          * Since these values are linear (not dB or dBm), linear
 675          *   signal-to-noise ratio (SNR) is (sig_avg / noise_diff).
 676          * Convert linear SNR to dB SNR, then subtract that from rssi dBm
 677          *   to obtain noise level in dBm.
 678          * Calculate rx_status.signal (quality indicator in %) based on SNR. */
 679         if (rx_stats_noise_diff) {
 680                 snr = rx_stats_sig_avg / rx_stats_noise_diff;
 681                 rx_status.noise = rx_status.signal -
 682                                         iwl3945_calc_db_from_ratio(snr);
 683                 rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
 684                                                          rx_status.noise);
 685
 686         /* If noise info not available, calculate signal quality indicator (%)
 687          *   using just the dBm signal level. */
 688         } else {
 689                 rx_status.noise = priv->last_rx_noise;
 690                 rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
 691         }
 692
 693
 694         IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
 695                         rx_status.signal, rx_status.noise, rx_status.qual,
 696                         rx_stats_sig_avg, rx_stats_noise_diff);
 697
 698         header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 699
 700         network_packet = iwl3945_is_network_packet(priv, header);
 701
 702         IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
 703                               network_packet ? '*' : ' ',
 704                               le16_to_cpu(rx_hdr->channel),
 705                               rx_status.signal, rx_status.signal,
 706                               rx_status.noise, rx_status.rate_idx);
 707
 708 #ifdef CONFIG_IWL3945_DEBUG
 709         if (iwl3945_debug_level & (IWL_DL_RX))
 710                 /* Set "1" to report good data frames in groups of 100 */
 711                 iwl3945_dbg_report_frame(priv, pkt, header, 1);
 712 #endif
 713
 714         if (network_packet) {
 715                 priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
 716                 priv->last_tsf = le64_to_cpu(rx_end->timestamp);
 717                 priv->last_rx_rssi = rx_status.signal;
 718                 priv->last_rx_noise = rx_status.noise;
 719         }
 720
 721         iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
 722 }
 723
 724 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv *priv, void *ptr,
 725                                  dma_addr_t addr, u16 len)
 726 {
 727         int count;
 728         u32 pad;
 729         struct iwl3945_tfd_frame *tfd = (struct iwl3945_tfd_frame *)ptr;
 730
 731         count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 732         pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags));
 733
 734         if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
 735                 IWL_ERROR("Error can not send more than %d chunks\n",
 736                           NUM_TFD_CHUNKS);
 737                 return -EINVAL;
 738         }
 739
 740         tfd->pa[count].addr = cpu_to_le32(addr);
 741         tfd->pa[count].len = cpu_to_le32(len);
 742
 743         count++;
 744
 745         tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
 746                                          TFD_CTL_PAD_SET(pad));
 747
 748         return 0;
 749 }
 750
 751 /**
 752  * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
 753  *
 754  * Does NOT advance any indexes
 755  */
 756 int iwl3945_hw_txq_free_tfd(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
 757 {
 758         struct iwl3945_tfd_frame *bd_tmp = (struct iwl3945_tfd_frame *)&txq->bd[0];
 759         struct iwl3945_tfd_frame *bd = &bd_tmp[txq->q.read_ptr];
 760         struct pci_dev *dev = priv->pci_dev;
 761         int i;
 762         int counter;
 763
 764         /* classify bd */
 765         if (txq->q.id == IWL_CMD_QUEUE_NUM)
 766                 /* nothing to cleanup after for host commands */
 767                 return 0;
 768
 769         /* sanity check */
 770         counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags));
 771         if (counter > NUM_TFD_CHUNKS) {
 772                 IWL_ERROR("Too many chunks: %i\n", counter);
 773                 /* @todo issue fatal error, it is quite serious situation */
 774                 return 0;
 775         }
 776
 777         /* unmap chunks if any */
 778
 779         for (i = 1; i < counter; i++) {
 780                 pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr),
 781                                  le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE);
 782                 if (txq->txb[txq->q.read_ptr].skb[0]) {
 783                         struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[0];
 784                         if (txq->txb[txq->q.read_ptr].skb[0]) {
 785                                 /* Can be called from interrupt context */
 786                                 dev_kfree_skb_any(skb);
 787                                 txq->txb[txq->q.read_ptr].skb[0] = NULL;
 788                         }
 789                 }
 790         }
 791         return 0;
 792 }
 793
 794 u8 iwl3945_hw_find_station(struct iwl3945_priv *priv, const u8 *addr)
 795 {
 796         int i, start = IWL_AP_ID;
 797         int ret = IWL_INVALID_STATION;
 798         unsigned long flags;
 799
 800         if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
 801             (priv->iw_mode == NL80211_IFTYPE_AP))
 802                 start = IWL_STA_ID;
 803
 804         if (is_broadcast_ether_addr(addr))
 805                 return priv->hw_setting.bcast_sta_id;
 806
 807         spin_lock_irqsave(&priv->sta_lock, flags);
 808         for (i = start; i < priv->hw_setting.max_stations; i++)
 809                 if ((priv->stations[i].used) &&
 810                     (!compare_ether_addr
 811                      (priv->stations[i].sta.sta.addr, addr))) {
 812                         ret = i;
 813                         goto out;
 814                 }
 815
 816         IWL_DEBUG_INFO("can not find STA %pM (total %d)\n",
 817                        addr, priv->num_stations);
 818  out:
 819         spin_unlock_irqrestore(&priv->sta_lock, flags);
 820         return ret;
 821 }
 822
 823 /**
 824  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
 825  *
 826 */
 827 void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv *priv,
 828                               struct iwl3945_cmd *cmd,
 829                               struct ieee80211_tx_info *info,
 830                               struct ieee80211_hdr *hdr, int sta_id, int tx_id)
 831 {
 832         unsigned long flags;
 833         u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
 834         u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT - 1);
 835         u16 rate_mask;
 836         int rate;
 837         u8 rts_retry_limit;
 838         u8 data_retry_limit;
 839         __le32 tx_flags;
 840         __le16 fc = hdr->frame_control;
 841
 842         rate = iwl3945_rates[rate_index].plcp;
 843         tx_flags = cmd->cmd.tx.tx_flags;
 844
 845         /* We need to figure out how to get the sta->supp_rates while
 846          * in this running context */
 847         rate_mask = IWL_RATES_MASK;
 848
 849         spin_lock_irqsave(&priv->sta_lock, flags);
 850
 851         priv->stations[sta_id].current_rate.rate_n_flags = rate;
 852
 853         if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
 854             (sta_id != priv->hw_setting.bcast_sta_id) &&
 855                 (sta_id != IWL_MULTICAST_ID))
 856                 priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate;
 857
 858         spin_unlock_irqrestore(&priv->sta_lock, flags);
 859
 860         if (tx_id >= IWL_CMD_QUEUE_NUM)
 861                 rts_retry_limit = 3;
 862         else
 863                 rts_retry_limit = 7;
 864
 865         if (ieee80211_is_probe_resp(fc)) {
 866                 data_retry_limit = 3;
 867                 if (data_retry_limit < rts_retry_limit)
 868                         rts_retry_limit = data_retry_limit;
 869         } else
 870                 data_retry_limit = IWL_DEFAULT_TX_RETRY;
 871
 872         if (priv->data_retry_limit != -1)
 873                 data_retry_limit = priv->data_retry_limit;
 874
 875         if (ieee80211_is_mgmt(fc)) {
 876                 switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
 877                 case cpu_to_le16(IEEE80211_STYPE_AUTH):
 878                 case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
 879                 case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
 880                 case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
 881                         if (tx_flags & TX_CMD_FLG_RTS_MSK) {
 882                                 tx_flags &= ~TX_CMD_FLG_RTS_MSK;
 883                                 tx_flags |= TX_CMD_FLG_CTS_MSK;
 884                         }
 885                         break;
 886                 default:
 887                         break;
 888                 }
 889         }
 890
 891         cmd->cmd.tx.rts_retry_limit = rts_retry_limit;
 892         cmd->cmd.tx.data_retry_limit = data_retry_limit;
 893         cmd->cmd.tx.rate = rate;
 894         cmd->cmd.tx.tx_flags = tx_flags;
 895
 896         /* OFDM */
 897         cmd->cmd.tx.supp_rates[0] =
 898            ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
 899
 900         /* CCK */
 901         cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF);
 902
 903         IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 904                        "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
 905                        cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags),
 906                        cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]);
 907 }
 908
 909 u8 iwl3945_sync_sta(struct iwl3945_priv *priv, int sta_id, u16 tx_rate, u8 flags)
 910 {
 911         unsigned long flags_spin;
 912         struct iwl3945_station_entry *station;
 913
 914         if (sta_id == IWL_INVALID_STATION)
 915                 return IWL_INVALID_STATION;
 916
 917         spin_lock_irqsave(&priv->sta_lock, flags_spin);
 918         station = &priv->stations[sta_id];
 919
 920         station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
 921         station->sta.rate_n_flags = cpu_to_le16(tx_rate);
 922         station->current_rate.rate_n_flags = tx_rate;
 923         station->sta.mode = STA_CONTROL_MODIFY_MSK;
 924
 925         spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 926
 927         iwl3945_send_add_station(priv, &station->sta, flags);
 928         IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n",
 929                         sta_id, tx_rate);
 930         return sta_id;
 931 }
 932
 933 static int iwl3945_nic_set_pwr_src(struct iwl3945_priv *priv, int pwr_max)
 934 {
 935         int rc;
 936         unsigned long flags;
 937
 938         spin_lock_irqsave(&priv->lock, flags);
 939         rc = iwl3945_grab_nic_access(priv);
 940         if (rc) {
 941                 spin_unlock_irqrestore(&priv->lock, flags);
 942                 return rc;
 943         }
 944
 945         if (!pwr_max) {
 946                 u32 val;
 947
 948                 rc = pci_read_config_dword(priv->pci_dev,
 949                                 PCI_POWER_SOURCE, &val);
 950                 if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
 951                         iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 952                                         APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 953                                         ~APMG_PS_CTRL_MSK_PWR_SRC);
 954                         iwl3945_release_nic_access(priv);
 955
 956                         iwl3945_poll_bit(priv, CSR_GPIO_IN,
 957                                      CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
 958                                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
 959                 } else
 960                         iwl3945_release_nic_access(priv);
 961         } else {
 962                 iwl3945_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 963                                 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 964                                 ~APMG_PS_CTRL_MSK_PWR_SRC);
 965
 966                 iwl3945_release_nic_access(priv);
 967                 iwl3945_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
 968                              CSR_GPIO_IN_BIT_AUX_POWER, 5000);  /* uS */
 969         }
 970         spin_unlock_irqrestore(&priv->lock, flags);
 971
 972         return rc;
 973 }
 974
 975 static int iwl3945_rx_init(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
 976 {
 977         int rc;
 978         unsigned long flags;
 979
 980         spin_lock_irqsave(&priv->lock, flags);
 981         rc = iwl3945_grab_nic_access(priv);
 982         if (rc) {
 983                 spin_unlock_irqrestore(&priv->lock, flags);
 984                 return rc;
 985         }
 986
 987         iwl3945_write_direct32(priv, FH_RCSR_RBD_BASE(0), rxq->dma_addr);
 988         iwl3945_write_direct32(priv, FH_RCSR_RPTR_ADDR(0),
 989                              priv->hw_setting.shared_phys +
 990                              offsetof(struct iwl3945_shared, rx_read_ptr[0]));
 991         iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), 0);
 992         iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0),
 993                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
 994                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
 995                 ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
 996                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
 997                 (RX_QUEUE_SIZE_LOG << ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
 998                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
 999                 (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
1000                 ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
1001
1002         /* fake read to flush all prev I/O */
1003         iwl3945_read_direct32(priv, FH_RSSR_CTRL);
1004
1005         iwl3945_release_nic_access(priv);
1006         spin_unlock_irqrestore(&priv->lock, flags);
1007
1008         return 0;
1009 }
1010
1011 static int iwl3945_tx_reset(struct iwl3945_priv *priv)
1012 {
1013         int rc;
1014         unsigned long flags;
1015
1016         spin_lock_irqsave(&priv->lock, flags);
1017         rc = iwl3945_grab_nic_access(priv);
1018         if (rc) {
1019                 spin_unlock_irqrestore(&priv->lock, flags);
1020                 return rc;
1021         }
1022
1023         /* bypass mode */
1024         iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
1025
1026         /* RA 0 is active */
1027         iwl3945_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
1028
1029         /* all 6 fifo are active */
1030         iwl3945_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
1031
1032         iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
1033         iwl3945_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
1034         iwl3945_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
1035         iwl3945_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
1036
1037         iwl3945_write_direct32(priv, FH_TSSR_CBB_BASE,
1038                              priv->hw_setting.shared_phys);
1039
1040         iwl3945_write_direct32(priv, FH_TSSR_MSG_CONFIG,
1041                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
1042                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
1043                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
1044                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
1045                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
1046                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
1047                 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
1048
1049         iwl3945_release_nic_access(priv);
1050         spin_unlock_irqrestore(&priv->lock, flags);
1051
1052         return 0;
1053 }
1054
1055 /**
1056  * iwl3945_txq_ctx_reset - Reset TX queue context
1057  *
1058  * Destroys all DMA structures and initialize them again
1059  */
1060 static int iwl3945_txq_ctx_reset(struct iwl3945_priv *priv)
1061 {
1062         int rc;
1063         int txq_id, slots_num;
1064
1065         iwl3945_hw_txq_ctx_free(priv);
1066
1067         /* Tx CMD queue */
1068         rc = iwl3945_tx_reset(priv);
1069         if (rc)
1070                 goto error;
1071
1072         /* Tx queue(s) */
1073         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
1074                 slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
1075                                 TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
1076                 rc = iwl3945_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
1077                                 txq_id);
1078                 if (rc) {
1079                         IWL_ERROR("Tx %d queue init failed\n", txq_id);
1080                         goto error;
1081                 }
1082         }
1083
1084         return rc;
1085
1086  error:
1087         iwl3945_hw_txq_ctx_free(priv);
1088         return rc;
1089 }
1090
1091 int iwl3945_hw_nic_init(struct iwl3945_priv *priv)
1092 {
1093         u8 rev_id;
1094         int rc;
1095         unsigned long flags;
1096         struct iwl3945_rx_queue *rxq = &priv->rxq;
1097
1098         iwl3945_power_init_handle(priv);
1099
1100         spin_lock_irqsave(&priv->lock, flags);
1101         iwl3945_set_bit(priv, CSR_ANA_PLL_CFG, CSR39_ANA_PLL_CFG_VAL);
1102         iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
1103                     CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
1104
1105         iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
1106         rc = iwl3945_poll_direct_bit(priv, CSR_GP_CNTRL,
1107                         CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
1108         if (rc < 0) {
1109                 spin_unlock_irqrestore(&priv->lock, flags);
1110                 IWL_DEBUG_INFO("Failed to init the card\n");
1111                 return rc;
1112         }
1113
1114         rc = iwl3945_grab_nic_access(priv);
1115         if (rc) {
1116                 spin_unlock_irqrestore(&priv->lock, flags);
1117                 return rc;
1118         }
1119         iwl3945_write_prph(priv, APMG_CLK_EN_REG,
1120                                  APMG_CLK_VAL_DMA_CLK_RQT |
1121                                  APMG_CLK_VAL_BSM_CLK_RQT);
1122         udelay(20);
1123         iwl3945_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
1124                                     APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
1125         iwl3945_release_nic_access(priv);
1126         spin_unlock_irqrestore(&priv->lock, flags);
1127
1128         /* Determine HW type */
1129         rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
1130         if (rc)
1131                 return rc;
1132         IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id);
1133
1134         iwl3945_nic_set_pwr_src(priv, 1);
1135         spin_lock_irqsave(&priv->lock, flags);
1136
1137         if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
1138                 IWL_DEBUG_INFO("RTP type \n");
1139         else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
1140                 IWL_DEBUG_INFO("3945 RADIO-MB type\n");
1141                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1142                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
1143         } else {
1144                 IWL_DEBUG_INFO("3945 RADIO-MM type\n");
1145                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1146                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
1147         }
1148
1149         if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) {
1150                 IWL_DEBUG_INFO("SKU OP mode is mrc\n");
1151                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1152                             CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
1153         } else
1154                 IWL_DEBUG_INFO("SKU OP mode is basic\n");
1155
1156         if ((priv->eeprom.board_revision & 0xF0) == 0xD0) {
1157                 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1158                                priv->eeprom.board_revision);
1159                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1160                             CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1161         } else {
1162                 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1163                                priv->eeprom.board_revision);
1164                 iwl3945_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
1165                               CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
1166         }
1167
1168         if (priv->eeprom.almgor_m_version <= 1) {
1169                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1170                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
1171                 IWL_DEBUG_INFO("Card M type A version is 0x%X\n",
1172                                priv->eeprom.almgor_m_version);
1173         } else {
1174                 IWL_DEBUG_INFO("Card M type B version is 0x%X\n",
1175                                priv->eeprom.almgor_m_version);
1176                 iwl3945_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1177                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
1178         }
1179         spin_unlock_irqrestore(&priv->lock, flags);
1180
1181         if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
1182                 IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
1183
1184         if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
1185                 IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
1186
1187         /* Allocate the RX queue, or reset if it is already allocated */
1188         if (!rxq->bd) {
1189                 rc = iwl3945_rx_queue_alloc(priv);
1190                 if (rc) {
1191                         IWL_ERROR("Unable to initialize Rx queue\n");
1192                         return -ENOMEM;
1193                 }
1194         } else
1195                 iwl3945_rx_queue_reset(priv, rxq);
1196
1197         iwl3945_rx_replenish(priv);
1198
1199         iwl3945_rx_init(priv, rxq);
1200
1201         spin_lock_irqsave(&priv->lock, flags);
1202
1203         /* Look at using this instead:
1204         rxq->need_update = 1;
1205         iwl3945_rx_queue_update_write_ptr(priv, rxq);
1206         */
1207
1208         rc = iwl3945_grab_nic_access(priv);
1209         if (rc) {
1210                 spin_unlock_irqrestore(&priv->lock, flags);
1211                 return rc;
1212         }
1213         iwl3945_write_direct32(priv, FH_RCSR_WPTR(0), rxq->write & ~7);
1214         iwl3945_release_nic_access(priv);
1215
1216         spin_unlock_irqrestore(&priv->lock, flags);
1217
1218         rc = iwl3945_txq_ctx_reset(priv);
1219         if (rc)
1220                 return rc;
1221
1222         set_bit(STATUS_INIT, &priv->status);
1223
1224         return 0;
1225 }
1226
1227 /**
1228  * iwl3945_hw_txq_ctx_free - Free TXQ Context
1229  *
1230  * Destroy all TX DMA queues and structures
1231  */
1232 void iwl3945_hw_txq_ctx_free(struct iwl3945_priv *priv)
1233 {
1234         int txq_id;
1235
1236         /* Tx queues */
1237         for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++)
1238                 iwl3945_tx_queue_free(priv, &priv->txq[txq_id]);
1239 }
1240
1241 void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv *priv)
1242 {
1243         int queue;
1244         unsigned long flags;
1245
1246         spin_lock_irqsave(&priv->lock, flags);
1247         if (iwl3945_grab_nic_access(priv)) {
1248                 spin_unlock_irqrestore(&priv->lock, flags);
1249                 iwl3945_hw_txq_ctx_free(priv);
1250                 return;
1251         }
1252
1253         /* stop SCD */
1254         iwl3945_write_prph(priv, ALM_SCD_MODE_REG, 0);
1255
1256         /* reset TFD queues */
1257         for (queue = TFD_QUEUE_MIN; queue < TFD_QUEUE_MAX; queue++) {
1258                 iwl3945_write_direct32(priv, FH_TCSR_CONFIG(queue), 0x0);
1259                 iwl3945_poll_direct_bit(priv, FH_TSSR_TX_STATUS,
1260                                 ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue),
1261                                 1000);
1262         }
1263
1264         iwl3945_release_nic_access(priv);
1265         spin_unlock_irqrestore(&priv->lock, flags);
1266
1267         iwl3945_hw_txq_ctx_free(priv);
1268 }
1269
1270 int iwl3945_hw_nic_stop_master(struct iwl3945_priv *priv)
1271 {
1272         int rc = 0;
1273         u32 reg_val;
1274         unsigned long flags;
1275
1276         spin_lock_irqsave(&priv->lock, flags);
1277
1278         /* set stop master bit */
1279         iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
1280
1281         reg_val = iwl3945_read32(priv, CSR_GP_CNTRL);
1282
1283         if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE ==
1284             (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE))
1285                 IWL_DEBUG_INFO("Card in power save, master is already "
1286                                "stopped\n");
1287         else {
1288                 rc = iwl3945_poll_direct_bit(priv, CSR_RESET,
1289                                   CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
1290                 if (rc < 0) {
1291                         spin_unlock_irqrestore(&priv->lock, flags);
1292                         return rc;
1293                 }
1294         }
1295
1296         spin_unlock_irqrestore(&priv->lock, flags);
1297         IWL_DEBUG_INFO("stop master\n");
1298
1299         return rc;
1300 }
1301
1302 int iwl3945_hw_nic_reset(struct iwl3945_priv *priv)
1303 {
1304         int rc;
1305         unsigned long flags;
1306
1307         iwl3945_hw_nic_stop_master(priv);
1308
1309         spin_lock_irqsave(&priv->lock, flags);
1310
1311         iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
1312
1313         iwl3945_poll_direct_bit(priv, CSR_GP_CNTRL,
1314                          CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
1315
1316         rc = iwl3945_grab_nic_access(priv);
1317         if (!rc) {
1318                 iwl3945_write_prph(priv, APMG_CLK_CTRL_REG,
1319                                          APMG_CLK_VAL_BSM_CLK_RQT);
1320
1321                 udelay(10);
1322
1323                 iwl3945_set_bit(priv, CSR_GP_CNTRL,
1324                             CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
1325
1326                 iwl3945_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
1327                 iwl3945_write_prph(priv, APMG_RTC_INT_STT_REG,
1328                                         0xFFFFFFFF);
1329
1330                 /* enable DMA */
1331                 iwl3945_write_prph(priv, APMG_CLK_EN_REG,
1332                                          APMG_CLK_VAL_DMA_CLK_RQT |
1333                                          APMG_CLK_VAL_BSM_CLK_RQT);
1334                 udelay(10);
1335
1336                 iwl3945_set_bits_prph(priv, APMG_PS_CTRL_REG,
1337                                 APMG_PS_CTRL_VAL_RESET_REQ);
1338                 udelay(5);
1339                 iwl3945_clear_bits_prph(priv, APMG_PS_CTRL_REG,
1340                                 APMG_PS_CTRL_VAL_RESET_REQ);
1341                 iwl3945_release_nic_access(priv);
1342         }
1343
1344         /* Clear the 'host command active' bit... */
1345         clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
1346
1347         wake_up_interruptible(&priv->wait_command_queue);
1348         spin_unlock_irqrestore(&priv->lock, flags);
1349
1350         return rc;
1351 }
1352
1353 /**
1354  * iwl3945_hw_reg_adjust_power_by_temp
1355  * return index delta into power gain settings table
1356 */
1357 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1358 {
1359         return (new_reading - old_reading) * (-11) / 100;
1360 }
1361
1362 /**
1363  * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1364  */
1365 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
1366 {
1367         return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
1368 }
1369
1370 int iwl3945_hw_get_temperature(struct iwl3945_priv *priv)
1371 {
1372         return iwl3945_read32(priv, CSR_UCODE_DRV_GP2);
1373 }
1374
1375 /**
1376  * iwl3945_hw_reg_txpower_get_temperature
1377  * get the current temperature by reading from NIC
1378 */
1379 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl3945_priv *priv)
1380 {
1381         int temperature;
1382
1383         temperature = iwl3945_hw_get_temperature(priv);
1384
1385         /* driver's okay range is -260 to +25.
1386          *   human readable okay range is 0 to +285 */
1387         IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
1388
1389         /* handle insane temp reading */
1390         if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
1391                 IWL_ERROR("Error bad temperature value  %d\n", temperature);
1392
1393                 /* if really really hot(?),
1394                  *   substitute the 3rd band/group's temp measured at factory */
1395                 if (priv->last_temperature > 100)
1396                         temperature = priv->eeprom.groups[2].temperature;
1397                 else /* else use most recent "sane" value from driver */
1398                         temperature = priv->last_temperature;
1399         }
1400
1401         return temperature;     /* raw, not "human readable" */
1402 }
1403
1404 /* Adjust Txpower only if temperature variance is greater than threshold.
1405  *
1406  * Both are lower than older versions' 9 degrees */
1407 #define IWL_TEMPERATURE_LIMIT_TIMER   6
1408
1409 /**
1410  * is_temp_calib_needed - determines if new calibration is needed
1411  *
1412  * records new temperature in tx_mgr->temperature.
1413  * replaces tx_mgr->last_temperature *only* if calib needed
1414  *    (assumes caller will actually do the calibration!). */
1415 static int is_temp_calib_needed(struct iwl3945_priv *priv)
1416 {
1417         int temp_diff;
1418
1419         priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
1420         temp_diff = priv->temperature - priv->last_temperature;
1421
1422         /* get absolute value */
1423         if (temp_diff < 0) {
1424                 IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff);
1425                 temp_diff = -temp_diff;
1426         } else if (temp_diff == 0)
1427                 IWL_DEBUG_POWER("Same temp,\n");
1428         else
1429                 IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff);
1430
1431         /* if we don't need calibration, *don't* update last_temperature */
1432         if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
1433                 IWL_DEBUG_POWER("Timed thermal calib not needed\n");
1434                 return 0;
1435         }
1436
1437         IWL_DEBUG_POWER("Timed thermal calib needed\n");
1438
1439         /* assume that caller will actually do calib ...
1440          *   update the "last temperature" value */
1441         priv->last_temperature = priv->temperature;
1442         return 1;
1443 }
1444
1445 #define IWL_MAX_GAIN_ENTRIES 78
1446 #define IWL_CCK_FROM_OFDM_POWER_DIFF  -5
1447 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1448
1449 /* radio and DSP power table, each step is 1/2 dB.
1450  * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1451 static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
1452         {
1453          {251, 127},            /* 2.4 GHz, highest power */
1454          {251, 127},
1455          {251, 127},
1456          {251, 127},
1457          {251, 125},
1458          {251, 110},
1459          {251, 105},
1460          {251, 98},
1461          {187, 125},
1462          {187, 115},
1463          {187, 108},
1464          {187, 99},
1465          {243, 119},
1466          {243, 111},
1467          {243, 105},
1468          {243, 97},
1469          {243, 92},
1470          {211, 106},
1471          {211, 100},
1472          {179, 120},
1473          {179, 113},
1474          {179, 107},
1475          {147, 125},
1476          {147, 119},
1477          {147, 112},
1478          {147, 106},
1479          {147, 101},
1480          {147, 97},
1481          {147, 91},
1482          {115, 107},
1483          {235, 121},
1484          {235, 115},
1485          {235, 109},
1486          {203, 127},
1487          {203, 121},
1488          {203, 115},
1489          {203, 108},
1490          {203, 102},
1491          {203, 96},
1492          {203, 92},
1493          {171, 110},
1494          {171, 104},
1495          {171, 98},
1496          {139, 116},
1497          {227, 125},
1498          {227, 119},
1499          {227, 113},
1500          {227, 107},
1501          {227, 101},
1502          {227, 96},
1503          {195, 113},
1504          {195, 106},
1505          {195, 102},
1506          {195, 95},
1507          {163, 113},
1508          {163, 106},
1509          {163, 102},
1510          {163, 95},
1511          {131, 113},
1512          {131, 106},
1513          {131, 102},
1514          {131, 95},
1515          {99, 113},
1516          {99, 106},
1517          {99, 102},
1518          {99, 95},
1519          {67, 113},
1520          {67, 106},
1521          {67, 102},
1522          {67, 95},
1523          {35, 113},
1524          {35, 106},
1525          {35, 102},
1526          {35, 95},
1527          {3, 113},
1528          {3, 106},
1529          {3, 102},
1530          {3, 95} },             /* 2.4 GHz, lowest power */
1531         {
1532          {251, 127},            /* 5.x GHz, highest power */
1533          {251, 120},
1534          {251, 114},
1535          {219, 119},
1536          {219, 101},
1537          {187, 113},
1538          {187, 102},
1539          {155, 114},
1540          {155, 103},
1541          {123, 117},
1542          {123, 107},
1543          {123, 99},
1544          {123, 92},
1545          {91, 108},
1546          {59, 125},
1547          {59, 118},
1548          {59, 109},
1549          {59, 102},
1550          {59, 96},
1551          {59, 90},
1552          {27, 104},
1553          {27, 98},
1554          {27, 92},
1555          {115, 118},
1556          {115, 111},
1557          {115, 104},
1558          {83, 126},
1559          {83, 121},
1560          {83, 113},
1561          {83, 105},
1562          {83, 99},
1563          {51, 118},
1564          {51, 111},
1565          {51, 104},
1566          {51, 98},
1567          {19, 116},
1568          {19, 109},
1569          {19, 102},
1570          {19, 98},
1571          {19, 93},
1572          {171, 113},
1573          {171, 107},
1574          {171, 99},
1575          {139, 120},
1576          {139, 113},
1577          {139, 107},
1578          {139, 99},
1579          {107, 120},
1580          {107, 113},
1581          {107, 107},
1582          {107, 99},
1583          {75, 120},
1584          {75, 113},
1585          {75, 107},
1586          {75, 99},
1587          {43, 120},
1588          {43, 113},
1589          {43, 107},
1590          {43, 99},
1591          {11, 120},
1592          {11, 113},
1593          {11, 107},
1594          {11, 99},
1595          {131, 107},
1596          {131, 99},
1597          {99, 120},
1598          {99, 113},
1599          {99, 107},
1600          {99, 99},
1601          {67, 120},
1602          {67, 113},
1603          {67, 107},
1604          {67, 99},
1605          {35, 120},
1606          {35, 113},
1607          {35, 107},
1608          {35, 99},
1609          {3, 120} }             /* 5.x GHz, lowest power */
1610 };
1611
1612 static inline u8 iwl3945_hw_reg_fix_power_index(int index)
1613 {
1614         if (index < 0)
1615                 return 0;
1616         if (index >= IWL_MAX_GAIN_ENTRIES)
1617                 return IWL_MAX_GAIN_ENTRIES - 1;
1618         return (u8) index;
1619 }
1620
1621 /* Kick off thermal recalibration check every 60 seconds */
1622 #define REG_RECALIB_PERIOD (60)
1623
1624 /**
1625  * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1626  *
1627  * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1628  * or 6 Mbit (OFDM) rates.
1629  */
1630 static void iwl3945_hw_reg_set_scan_power(struct iwl3945_priv *priv, u32 scan_tbl_index,
1631                                s32 rate_index, const s8 *clip_pwrs,
1632                                struct iwl3945_channel_info *ch_info,
1633                                int band_index)
1634 {
1635         struct iwl3945_scan_power_info *scan_power_info;
1636         s8 power;
1637         u8 power_index;
1638
1639         scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
1640
1641         /* use this channel group's 6Mbit clipping/saturation pwr,
1642          *   but cap at regulatory scan power restriction (set during init
1643          *   based on eeprom channel data) for this channel.  */
1644         power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
1645
1646         /* further limit to user's max power preference.
1647          * FIXME:  Other spectrum management power limitations do not
1648          *   seem to apply?? */
1649         power = min(power, priv->user_txpower_limit);
1650         scan_power_info->requested_power = power;
1651
1652         /* find difference between new scan *power* and current "normal"
1653          *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
1654          *   current "normal" temperature-compensated Tx power *index* for
1655          *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1656          *   *index*. */
1657         power_index = ch_info->power_info[rate_index].power_table_index
1658             - (power - ch_info->power_info
1659                [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
1660
1661         /* store reference index that we use when adjusting *all* scan
1662          *   powers.  So we can accommodate user (all channel) or spectrum
1663          *   management (single channel) power changes "between" temperature
1664          *   feedback compensation procedures.
1665          * don't force fit this reference index into gain table; it may be a
1666          *   negative number.  This will help avoid errors when we're at
1667          *   the lower bounds (highest gains, for warmest temperatures)
1668          *   of the table. */
1669
1670         /* don't exceed table bounds for "real" setting */
1671         power_index = iwl3945_hw_reg_fix_power_index(power_index);
1672
1673         scan_power_info->power_table_index = power_index;
1674         scan_power_info->tpc.tx_gain =
1675             power_gain_table[band_index][power_index].tx_gain;
1676         scan_power_info->tpc.dsp_atten =
1677             power_gain_table[band_index][power_index].dsp_atten;
1678 }
1679
1680 /**
1681  * iwl3945_hw_reg_send_txpower - fill in Tx Power command with gain settings
1682  *
1683  * Configures power settings for all rates for the current channel,
1684  * using values from channel info struct, and send to NIC
1685  */
1686 int iwl3945_hw_reg_send_txpower(struct iwl3945_priv *priv)
1687 {
1688         int rate_idx, i;
1689         const struct iwl3945_channel_info *ch_info = NULL;
1690         struct iwl3945_txpowertable_cmd txpower = {
1691                 .channel = priv->active_rxon.channel,
1692         };
1693
1694         txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1695         ch_info = iwl3945_get_channel_info(priv,
1696                                        priv->band,
1697                                        le16_to_cpu(priv->active_rxon.channel));
1698         if (!ch_info) {
1699                 IWL_ERROR
1700                     ("Failed to get channel info for channel %d [%d]\n",
1701                      le16_to_cpu(priv->active_rxon.channel), priv->band);
1702                 return -EINVAL;
1703         }
1704
1705         if (!is_channel_valid(ch_info)) {
1706                 IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on "
1707                                 "non-Tx channel.\n");
1708                 return 0;
1709         }
1710
1711         /* fill cmd with power settings for all rates for current channel */
1712         /* Fill OFDM rate */
1713         for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
1714              rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) {
1715
1716                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1717                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1718
1719                 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1720                                 le16_to_cpu(txpower.channel),
1721                                 txpower.band,
1722                                 txpower.power[i].tpc.tx_gain,
1723                                 txpower.power[i].tpc.dsp_atten,
1724                                 txpower.power[i].rate);
1725         }
1726         /* Fill CCK rates */
1727         for (rate_idx = IWL_FIRST_CCK_RATE;
1728              rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
1729                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1730                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1731
1732                 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1733                                 le16_to_cpu(txpower.channel),
1734                                 txpower.band,
1735                                 txpower.power[i].tpc.tx_gain,
1736                                 txpower.power[i].tpc.dsp_atten,
1737                                 txpower.power[i].rate);
1738         }
1739
1740         return iwl3945_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
1741                         sizeof(struct iwl3945_txpowertable_cmd), &txpower);
1742
1743 }
1744
1745 /**
1746  * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1747  * @ch_info: Channel to update.  Uses power_info.requested_power.
1748  *
1749  * Replace requested_power and base_power_index ch_info fields for
1750  * one channel.
1751  *
1752  * Called if user or spectrum management changes power preferences.
1753  * Takes into account h/w and modulation limitations (clip power).
1754  *
1755  * This does *not* send anything to NIC, just sets up ch_info for one channel.
1756  *
1757  * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1758  *       properly fill out the scan powers, and actual h/w gain settings,
1759  *       and send changes to NIC
1760  */
1761 static int iwl3945_hw_reg_set_new_power(struct iwl3945_priv *priv,
1762                              struct iwl3945_channel_info *ch_info)
1763 {
1764         struct iwl3945_channel_power_info *power_info;
1765         int power_changed = 0;
1766         int i;
1767         const s8 *clip_pwrs;
1768         int power;
1769
1770         /* Get this chnlgrp's rate-to-max/clip-powers table */
1771         clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
1772
1773         /* Get this channel's rate-to-current-power settings table */
1774         power_info = ch_info->power_info;
1775
1776         /* update OFDM Txpower settings */
1777         for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
1778              i++, ++power_info) {
1779                 int delta_idx;
1780
1781                 /* limit new power to be no more than h/w capability */
1782                 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1783                 if (power == power_info->requested_power)
1784                         continue;
1785
1786                 /* find difference between old and new requested powers,
1787                  *    update base (non-temp-compensated) power index */
1788                 delta_idx = (power - power_info->requested_power) * 2;
1789                 power_info->base_power_index -= delta_idx;
1790
1791                 /* save new requested power value */
1792                 power_info->requested_power = power;
1793
1794                 power_changed = 1;
1795         }
1796
1797         /* update CCK Txpower settings, based on OFDM 12M setting ...
1798          *    ... all CCK power settings for a given channel are the *same*. */
1799         if (power_changed) {
1800                 power =
1801                     ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1802                     requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
1803
1804                 /* do all CCK rates' iwl3945_channel_power_info structures */
1805                 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
1806                         power_info->requested_power = power;
1807                         power_info->base_power_index =
1808                             ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1809                             base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
1810                         ++power_info;
1811                 }
1812         }
1813
1814         return 0;
1815 }
1816
1817 /**
1818  * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1819  *
1820  * NOTE: Returned power limit may be less (but not more) than requested,
1821  *       based strictly on regulatory (eeprom and spectrum mgt) limitations
1822  *       (no consideration for h/w clipping limitations).
1823  */
1824 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl3945_channel_info *ch_info)
1825 {
1826         s8 max_power;
1827
1828 #if 0
1829         /* if we're using TGd limits, use lower of TGd or EEPROM */
1830         if (ch_info->tgd_data.max_power != 0)
1831                 max_power = min(ch_info->tgd_data.max_power,
1832                                 ch_info->eeprom.max_power_avg);
1833
1834         /* else just use EEPROM limits */
1835         else
1836 #endif
1837                 max_power = ch_info->eeprom.max_power_avg;
1838
1839         return min(max_power, ch_info->max_power_avg);
1840 }
1841
1842 /**
1843  * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1844  *
1845  * Compensate txpower settings of *all* channels for temperature.
1846  * This only accounts for the difference between current temperature
1847  *   and the factory calibration temperatures, and bases the new settings
1848  *   on the channel's base_power_index.
1849  *
1850  * If RxOn is "associated", this sends the new Txpower to NIC!
1851  */
1852 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv *priv)
1853 {
1854         struct iwl3945_channel_info *ch_info = NULL;
1855         int delta_index;
1856         const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1857         u8 a_band;
1858         u8 rate_index;
1859         u8 scan_tbl_index;
1860         u8 i;
1861         int ref_temp;
1862         int temperature = priv->temperature;
1863
1864         /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1865         for (i = 0; i < priv->channel_count; i++) {
1866                 ch_info = &priv->channel_info[i];
1867                 a_band = is_channel_a_band(ch_info);
1868
1869                 /* Get this chnlgrp's factory calibration temperature */
1870                 ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].
1871                     temperature;
1872
1873                 /* get power index adjustment based on current and factory
1874                  * temps */
1875                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
1876                                                               ref_temp);
1877
1878                 /* set tx power value for all rates, OFDM and CCK */
1879                 for (rate_index = 0; rate_index < IWL_RATE_COUNT;
1880                      rate_index++) {
1881                         int power_idx =
1882                             ch_info->power_info[rate_index].base_power_index;
1883
1884                         /* temperature compensate */
1885                         power_idx += delta_index;
1886
1887                         /* stay within table range */
1888                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
1889                         ch_info->power_info[rate_index].
1890                             power_table_index = (u8) power_idx;
1891                         ch_info->power_info[rate_index].tpc =
1892                             power_gain_table[a_band][power_idx];
1893                 }
1894
1895                 /* Get this chnlgrp's rate-to-max/clip-powers table */
1896                 clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
1897
1898                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1899                 for (scan_tbl_index = 0;
1900                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
1901                         s32 actual_index = (scan_tbl_index == 0) ?
1902                             IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
1903                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
1904                                            actual_index, clip_pwrs,
1905                                            ch_info, a_band);
1906                 }
1907         }
1908
1909         /* send Txpower command for current channel to ucode */
1910         return iwl3945_hw_reg_send_txpower(priv);
1911 }
1912
1913 int iwl3945_hw_reg_set_txpower(struct iwl3945_priv *priv, s8 power)
1914 {
1915         struct iwl3945_channel_info *ch_info;
1916         s8 max_power;
1917         u8 a_band;
1918         u8 i;
1919
1920         if (priv->user_txpower_limit == power) {
1921                 IWL_DEBUG_POWER("Requested Tx power same as current "
1922                                 "limit: %ddBm.\n", power);
1923                 return 0;
1924         }
1925
1926         IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power);
1927         priv->user_txpower_limit = power;
1928
1929         /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1930
1931         for (i = 0; i < priv->channel_count; i++) {
1932                 ch_info = &priv->channel_info[i];
1933                 a_band = is_channel_a_band(ch_info);
1934
1935                 /* find minimum power of all user and regulatory constraints
1936                  *    (does not consider h/w clipping limitations) */
1937                 max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
1938                 max_power = min(power, max_power);
1939                 if (max_power != ch_info->curr_txpow) {
1940                         ch_info->curr_txpow = max_power;
1941
1942                         /* this considers the h/w clipping limitations */
1943                         iwl3945_hw_reg_set_new_power(priv, ch_info);
1944                 }
1945         }
1946
1947         /* update txpower settings for all channels,
1948          *   send to NIC if associated. */
1949         is_temp_calib_needed(priv);
1950         iwl3945_hw_reg_comp_txpower_temp(priv);
1951
1952         return 0;
1953 }
1954
1955 /* will add 3945 channel switch cmd handling later */
1956 int iwl3945_hw_channel_switch(struct iwl3945_priv *priv, u16 channel)
1957 {
1958         return 0;
1959 }
1960
1961 /**
1962  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
1963  *
1964  * -- reset periodic timer
1965  * -- see if temp has changed enough to warrant re-calibration ... if so:
1966  *     -- correct coeffs for temp (can reset temp timer)
1967  *     -- save this temp as "last",
1968  *     -- send new set of gain settings to NIC
1969  * NOTE:  This should continue working, even when we're not associated,
1970  *   so we can keep our internal table of scan powers current. */
1971 void iwl3945_reg_txpower_periodic(struct iwl3945_priv *priv)
1972 {
1973         /* This will kick in the "brute force"
1974          * iwl3945_hw_reg_comp_txpower_temp() below */
1975         if (!is_temp_calib_needed(priv))
1976                 goto reschedule;
1977
1978         /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1979          * This is based *only* on current temperature,
1980          * ignoring any previous power measurements */
1981         iwl3945_hw_reg_comp_txpower_temp(priv);
1982
1983  reschedule:
1984         queue_delayed_work(priv->workqueue,
1985                            &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ);
1986 }
1987
1988 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
1989 {
1990         struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv,
1991                                              thermal_periodic.work);
1992
1993         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1994                 return;
1995
1996         mutex_lock(&priv->mutex);
1997         iwl3945_reg_txpower_periodic(priv);
1998         mutex_unlock(&priv->mutex);
1999 }
2000
2001 /**
2002  * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
2003  *                                 for the channel.
2004  *
2005  * This function is used when initializing channel-info structs.
2006  *
2007  * NOTE: These channel groups do *NOT* match the bands above!
2008  *       These channel groups are based on factory-tested channels;
2009  *       on A-band, EEPROM's "group frequency" entries represent the top
2010  *       channel in each group 1-4.  Group 5 All B/G channels are in group 0.
2011  */
2012 static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl3945_priv *priv,
2013                                        const struct iwl3945_channel_info *ch_info)
2014 {
2015         struct iwl3945_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0];
2016         u8 group;
2017         u16 group_index = 0;    /* based on factory calib frequencies */
2018         u8 grp_channel;
2019
2020         /* Find the group index for the channel ... don't use index 1(?) */
2021         if (is_channel_a_band(ch_info)) {
2022                 for (group = 1; group < 5; group++) {
2023                         grp_channel = ch_grp[group].group_channel;
2024                         if (ch_info->channel <= grp_channel) {
2025                                 group_index = group;
2026                                 break;
2027                         }
2028                 }
2029                 /* group 4 has a few channels *above* its factory cal freq */
2030                 if (group == 5)
2031                         group_index = 4;
2032         } else
2033                 group_index = 0;        /* 2.4 GHz, group 0 */
2034
2035         IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
2036                         group_index);
2037         return group_index;
2038 }
2039
2040 /**
2041  * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
2042  *
2043  * Interpolate to get nominal (i.e. at factory calibration temperature) index
2044  *   into radio/DSP gain settings table for requested power.
2045  */
2046 static int iwl3945_hw_reg_get_matched_power_index(struct iwl3945_priv *priv,
2047                                        s8 requested_power,
2048                                        s32 setting_index, s32 *new_index)
2049 {
2050         const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
2051         s32 index0, index1;
2052         s32 power = 2 * requested_power;
2053         s32 i;
2054         const struct iwl3945_eeprom_txpower_sample *samples;
2055         s32 gains0, gains1;
2056         s32 res;
2057         s32 denominator;
2058
2059         chnl_grp = &priv->eeprom.groups[setting_index];
2060         samples = chnl_grp->samples;
2061         for (i = 0; i < 5; i++) {
2062                 if (power == samples[i].power) {
2063                         *new_index = samples[i].gain_index;
2064                         return 0;
2065                 }
2066         }
2067
2068         if (power > samples[1].power) {
2069                 index0 = 0;
2070                 index1 = 1;
2071         } else if (power > samples[2].power) {
2072                 index0 = 1;
2073                 index1 = 2;
2074         } else if (power > samples[3].power) {
2075                 index0 = 2;
2076                 index1 = 3;
2077         } else {
2078                 index0 = 3;
2079                 index1 = 4;
2080         }
2081
2082         denominator = (s32) samples[index1].power - (s32) samples[index0].power;
2083         if (denominator == 0)
2084                 return -EINVAL;
2085         gains0 = (s32) samples[index0].gain_index * (1 << 19);
2086         gains1 = (s32) samples[index1].gain_index * (1 << 19);
2087         res = gains0 + (gains1 - gains0) *
2088             ((s32) power - (s32) samples[index0].power) / denominator +
2089             (1 << 18);
2090         *new_index = res >> 19;
2091         return 0;
2092 }
2093
2094 static void iwl3945_hw_reg_init_channel_groups(struct iwl3945_priv *priv)
2095 {
2096         u32 i;
2097         s32 rate_index;
2098         const struct iwl3945_eeprom_txpower_group *group;
2099
2100         IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n");
2101
2102         for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
2103                 s8 *clip_pwrs;  /* table of power levels for each rate */
2104                 s8 satur_pwr;   /* saturation power for each chnl group */
2105                 group = &priv->eeprom.groups[i];
2106
2107                 /* sanity check on factory saturation power value */
2108                 if (group->saturation_power < 40) {
2109                         IWL_WARNING("Error: saturation power is %d, "
2110                                     "less than minimum expected 40\n",
2111                                     group->saturation_power);
2112                         return;
2113                 }
2114
2115                 /*
2116                  * Derive requested power levels for each rate, based on
2117                  *   hardware capabilities (saturation power for band).
2118                  * Basic value is 3dB down from saturation, with further
2119                  *   power reductions for highest 3 data rates.  These
2120                  *   backoffs provide headroom for high rate modulation
2121                  *   power peaks, without too much distortion (clipping).
2122                  */
2123                 /* we'll fill in this array with h/w max power levels */
2124                 clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers;
2125
2126                 /* divide factory saturation power by 2 to find -3dB level */
2127                 satur_pwr = (s8) (group->saturation_power >> 1);
2128
2129                 /* fill in channel group's nominal powers for each rate */
2130                 for (rate_index = 0;
2131                      rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
2132                         switch (rate_index) {
2133                         case IWL_RATE_36M_INDEX_TABLE:
2134                                 if (i == 0)     /* B/G */
2135                                         *clip_pwrs = satur_pwr;
2136                                 else    /* A */
2137                                         *clip_pwrs = satur_pwr - 5;
2138                                 break;
2139                         case IWL_RATE_48M_INDEX_TABLE:
2140                                 if (i == 0)
2141                                         *clip_pwrs = satur_pwr - 7;
2142                                 else
2143                                         *clip_pwrs = satur_pwr - 10;
2144                                 break;
2145                         case IWL_RATE_54M_INDEX_TABLE:
2146                                 if (i == 0)
2147                                         *clip_pwrs = satur_pwr - 9;
2148                                 else
2149                                         *clip_pwrs = satur_pwr - 12;
2150                                 break;
2151                         default:
2152                                 *clip_pwrs = satur_pwr;
2153                                 break;
2154                         }
2155                 }
2156         }
2157 }
2158
2159 /**
2160  * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2161  *
2162  * Second pass (during init) to set up priv->channel_info
2163  *
2164  * Set up Tx-power settings in our channel info database for each VALID
2165  * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2166  * and current temperature.
2167  *
2168  * Since this is based on current temperature (at init time), these values may
2169  * not be valid for very long, but it gives us a starting/default point,
2170  * and allows us to active (i.e. using Tx) scan.
2171  *
2172  * This does *not* write values to NIC, just sets up our internal table.
2173  */
2174 int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv)
2175 {
2176         struct iwl3945_channel_info *ch_info = NULL;
2177         struct iwl3945_channel_power_info *pwr_info;
2178         int delta_index;
2179         u8 rate_index;
2180         u8 scan_tbl_index;
2181         const s8 *clip_pwrs;    /* array of power levels for each rate */
2182         u8 gain, dsp_atten;
2183         s8 power;
2184         u8 pwr_index, base_pwr_index, a_band;
2185         u8 i;
2186         int temperature;
2187
2188         /* save temperature reference,
2189          *   so we can determine next time to calibrate */
2190         temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
2191         priv->last_temperature = temperature;
2192
2193         iwl3945_hw_reg_init_channel_groups(priv);
2194
2195         /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2196         for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
2197              i++, ch_info++) {
2198                 a_band = is_channel_a_band(ch_info);
2199                 if (!is_channel_valid(ch_info))
2200                         continue;
2201
2202                 /* find this channel's channel group (*not* "band") index */
2203                 ch_info->group_index =
2204                         iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
2205
2206                 /* Get this chnlgrp's rate->max/clip-powers table */
2207                 clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
2208
2209                 /* calculate power index *adjustment* value according to
2210                  *  diff between current temperature and factory temperature */
2211                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
2212                                 priv->eeprom.groups[ch_info->group_index].
2213                                 temperature);
2214
2215                 IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n",
2216                                 ch_info->channel, delta_index, temperature +
2217                                 IWL_TEMP_CONVERT);
2218
2219                 /* set tx power value for all OFDM rates */
2220                 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
2221                      rate_index++) {
2222                         s32 uninitialized_var(power_idx);
2223                         int rc;
2224
2225                         /* use channel group's clip-power table,
2226                          *   but don't exceed channel's max power */
2227                         s8 pwr = min(ch_info->max_power_avg,
2228                                      clip_pwrs[rate_index]);
2229
2230                         pwr_info = &ch_info->power_info[rate_index];
2231
2232                         /* get base (i.e. at factory-measured temperature)
2233                          *    power table index for this rate's power */
2234                         rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
2235                                                          ch_info->group_index,
2236                                                          &power_idx);
2237                         if (rc) {
2238                                 IWL_ERROR("Invalid power index\n");
2239                                 return rc;
2240                         }
2241                         pwr_info->base_power_index = (u8) power_idx;
2242
2243                         /* temperature compensate */
2244                         power_idx += delta_index;
2245
2246                         /* stay within range of gain table */
2247                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
2248
2249                         /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2250                         pwr_info->requested_power = pwr;
2251                         pwr_info->power_table_index = (u8) power_idx;
2252                         pwr_info->tpc.tx_gain =
2253                             power_gain_table[a_band][power_idx].tx_gain;
2254                         pwr_info->tpc.dsp_atten =
2255                             power_gain_table[a_band][power_idx].dsp_atten;
2256                 }
2257
2258                 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2259                 pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
2260                 power = pwr_info->requested_power +
2261                         IWL_CCK_FROM_OFDM_POWER_DIFF;
2262                 pwr_index = pwr_info->power_table_index +
2263                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2264                 base_pwr_index = pwr_info->base_power_index +
2265                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2266
2267                 /* stay within table range */
2268                 pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
2269                 gain = power_gain_table[a_band][pwr_index].tx_gain;
2270                 dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
2271
2272                 /* fill each CCK rate's iwl3945_channel_power_info structure
2273                  * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
2274                  * NOTE:  CCK rates start at end of OFDM rates! */
2275                 for (rate_index = 0;
2276                      rate_index < IWL_CCK_RATES; rate_index++) {
2277                         pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
2278                         pwr_info->requested_power = power;
2279                         pwr_info->power_table_index = pwr_index;
2280                         pwr_info->base_power_index = base_pwr_index;
2281                         pwr_info->tpc.tx_gain = gain;
2282                         pwr_info->tpc.dsp_atten = dsp_atten;
2283                 }
2284
2285                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2286                 for (scan_tbl_index = 0;
2287                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
2288                         s32 actual_index = (scan_tbl_index == 0) ?
2289                                 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
2290                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
2291                                 actual_index, clip_pwrs, ch_info, a_band);
2292                 }
2293         }
2294
2295         return 0;
2296 }
2297
2298 int iwl3945_hw_rxq_stop(struct iwl3945_priv *priv)
2299 {
2300         int rc;
2301         unsigned long flags;
2302
2303         spin_lock_irqsave(&priv->lock, flags);
2304         rc = iwl3945_grab_nic_access(priv);
2305         if (rc) {
2306                 spin_unlock_irqrestore(&priv->lock, flags);
2307                 return rc;
2308         }
2309
2310         iwl3945_write_direct32(priv, FH_RCSR_CONFIG(0), 0);
2311         rc = iwl3945_poll_direct_bit(priv, FH_RSSR_STATUS,
2312                         FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
2313         if (rc < 0)
2314                 IWL_ERROR("Can't stop Rx DMA.\n");
2315
2316         iwl3945_release_nic_access(priv);
2317         spin_unlock_irqrestore(&priv->lock, flags);
2318
2319         return 0;
2320 }
2321
2322 int iwl3945_hw_tx_queue_init(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
2323 {
2324         int rc;
2325         unsigned long flags;
2326         int txq_id = txq->q.id;
2327
2328         struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt;
2329
2330         shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
2331
2332         spin_lock_irqsave(&priv->lock, flags);
2333         rc = iwl3945_grab_nic_access(priv);
2334         if (rc) {
2335                 spin_unlock_irqrestore(&priv->lock, flags);
2336                 return rc;
2337         }
2338         iwl3945_write_direct32(priv, FH_CBCC_CTRL(txq_id), 0);
2339         iwl3945_write_direct32(priv, FH_CBCC_BASE(txq_id), 0);
2340
2341         iwl3945_write_direct32(priv, FH_TCSR_CONFIG(txq_id),
2342                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2343                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2344                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2345                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2346                 ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2347         iwl3945_release_nic_access(priv);
2348
2349         /* fake read to flush all prev. writes */
2350         iwl3945_read32(priv, FH_TSSR_CBB_BASE);
2351         spin_unlock_irqrestore(&priv->lock, flags);
2352
2353         return 0;
2354 }
2355
2356 int iwl3945_hw_get_rx_read(struct iwl3945_priv *priv)
2357 {
2358         struct iwl3945_shared *shared_data = priv->hw_setting.shared_virt;
2359
2360         return le32_to_cpu(shared_data->rx_read_ptr[0]);
2361 }
2362
2363 /**
2364  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2365  */
2366 int iwl3945_init_hw_rate_table(struct iwl3945_priv *priv)
2367 {
2368         int rc, i, index, prev_index;
2369         struct iwl3945_rate_scaling_cmd rate_cmd = {
2370                 .reserved = {0, 0, 0},
2371         };
2372         struct iwl3945_rate_scaling_info *table = rate_cmd.table;
2373
2374         for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
2375                 index = iwl3945_rates[i].table_rs_index;
2376
2377                 table[index].rate_n_flags =
2378                         iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
2379                 table[index].try_cnt = priv->retry_rate;
2380                 prev_index = iwl3945_get_prev_ieee_rate(i);
2381                 table[index].next_rate_index =
2382                                 iwl3945_rates[prev_index].table_rs_index;
2383         }
2384
2385         switch (priv->band) {
2386         case IEEE80211_BAND_5GHZ:
2387                 IWL_DEBUG_RATE("Select A mode rate scale\n");
2388                 /* If one of the following CCK rates is used,
2389                  * have it fall back to the 6M OFDM rate */
2390                 for (i = IWL_RATE_1M_INDEX_TABLE;
2391                         i <= IWL_RATE_11M_INDEX_TABLE; i++)
2392                         table[i].next_rate_index =
2393                           iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2394
2395                 /* Don't fall back to CCK rates */
2396                 table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
2397                                                 IWL_RATE_9M_INDEX_TABLE;
2398
2399                 /* Don't drop out of OFDM rates */
2400                 table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
2401                     iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2402                 break;
2403
2404         case IEEE80211_BAND_2GHZ:
2405                 IWL_DEBUG_RATE("Select B/G mode rate scale\n");
2406                 /* If an OFDM rate is used, have it fall back to the
2407                  * 1M CCK rates */
2408
2409                 if (!(priv->sta_supp_rates & IWL_OFDM_RATES_MASK) &&
2410                     iwl3945_is_associated(priv)) {
2411
2412                         index = IWL_FIRST_CCK_RATE;
2413                         for (i = IWL_RATE_6M_INDEX_TABLE;
2414                              i <= IWL_RATE_54M_INDEX_TABLE; i++)
2415                                 table[i].next_rate_index =
2416                                         iwl3945_rates[index].table_rs_index;
2417
2418                         index = IWL_RATE_11M_INDEX_TABLE;
2419                         /* CCK shouldn't fall back to OFDM... */
2420                         table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
2421                 }
2422                 break;
2423
2424         default:
2425                 WARN_ON(1);
2426                 break;
2427         }
2428
2429         /* Update the rate scaling for control frame Tx */
2430         rate_cmd.table_id = 0;
2431         rc = iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2432                               &rate_cmd);
2433         if (rc)
2434                 return rc;
2435
2436         /* Update the rate scaling for data frame Tx */
2437         rate_cmd.table_id = 1;
2438         return iwl3945_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2439                                 &rate_cmd);
2440 }
2441
2442 /* Called when initializing driver */
2443 int iwl3945_hw_set_hw_setting(struct iwl3945_priv *priv)
2444 {
2445         memset((void *)&priv->hw_setting, 0,
2446                sizeof(struct iwl3945_driver_hw_info));
2447
2448         priv->hw_setting.shared_virt =
2449             pci_alloc_consistent(priv->pci_dev,
2450                                  sizeof(struct iwl3945_shared),
2451                                  &priv->hw_setting.shared_phys);
2452
2453         if (!priv->hw_setting.shared_virt) {
2454                 IWL_ERROR("failed to allocate pci memory\n");
2455                 mutex_unlock(&priv->mutex);
2456                 return -ENOMEM;
2457         }
2458
2459         priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE;
2460         priv->hw_setting.max_pkt_size = 2342;
2461         priv->hw_setting.tx_cmd_len = sizeof(struct iwl3945_tx_cmd);
2462         priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE;
2463         priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG;
2464         priv->hw_setting.max_stations = IWL3945_STATION_COUNT;
2465         priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID;
2466
2467         priv->hw_setting.tx_ant_num = 2;
2468         return 0;
2469 }
2470
2471 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv,
2472                           struct iwl3945_frame *frame, u8 rate)
2473 {
2474         struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
2475         unsigned int frame_size;
2476
2477         tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
2478         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2479
2480         tx_beacon_cmd->tx.sta_id = priv->hw_setting.bcast_sta_id;
2481         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2482
2483         frame_size = iwl3945_fill_beacon_frame(priv,
2484                                 tx_beacon_cmd->frame,
2485                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2486
2487         BUG_ON(frame_size > MAX_MPDU_SIZE);
2488         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
2489
2490         tx_beacon_cmd->tx.rate = rate;
2491         tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
2492                                       TX_CMD_FLG_TSF_MSK);
2493
2494         /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2495         tx_beacon_cmd->tx.supp_rates[0] =
2496                 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2497
2498         tx_beacon_cmd->tx.supp_rates[1] =
2499                 (IWL_CCK_BASIC_RATES_MASK & 0xF);
2500
2501         return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
2502 }
2503
2504 void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv)
2505 {
2506         priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
2507         priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
2508 }
2509
2510 void iwl3945_hw_setup_deferred_work(struct iwl3945_priv *priv)
2511 {
2512         INIT_DELAYED_WORK(&priv->thermal_periodic,
2513                           iwl3945_bg_reg_txpower_periodic);
2514 }
2515
2516 void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv *priv)
2517 {
2518         cancel_delayed_work(&priv->thermal_periodic);
2519 }
2520
2521 static struct iwl_3945_cfg iwl3945_bg_cfg = {
2522         .name = "3945BG",
2523         .fw_name_pre = IWL3945_FW_PRE,
2524         .ucode_api_max = IWL3945_UCODE_API_MAX,
2525         .ucode_api_min = IWL3945_UCODE_API_MIN,
2526         .sku = IWL_SKU_G,
2527 };
2528
2529 static struct iwl_3945_cfg iwl3945_abg_cfg = {
2530         .name = "3945ABG",
2531         .fw_name_pre = IWL3945_FW_PRE,
2532         .ucode_api_max = IWL3945_UCODE_API_MAX,
2533         .ucode_api_min = IWL3945_UCODE_API_MIN,
2534         .sku = IWL_SKU_A|IWL_SKU_G,
2535 };
2536
2537 struct pci_device_id iwl3945_hw_card_ids[] = {
2538         {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
2539         {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
2540         {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
2541         {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
2542         {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
2543         {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
2544         {0}
2545 };
2546
2547 MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);