2 * linux/arch/ppc64/kernel/signal.c
5 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
7 * Derived from "arch/i386/kernel/signal.c"
8 * Copyright (C) 1991, 1992 Linus Torvalds
9 * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * as published by the Free Software Foundation; either version
14 * 2 of the License, or (at your option) any later version.
17 #include <linux/config.h>
18 #include <linux/sched.h>
20 #include <linux/smp.h>
21 #include <linux/smp_lock.h>
22 #include <linux/kernel.h>
23 #include <linux/signal.h>
24 #include <linux/errno.h>
25 #include <linux/wait.h>
26 #include <linux/unistd.h>
27 #include <linux/stddef.h>
28 #include <linux/elf.h>
29 #include <linux/ptrace.h>
30 #include <linux/module.h>
32 #include <asm/sigcontext.h>
33 #include <asm/ucontext.h>
34 #include <asm/uaccess.h>
35 #include <asm/pgtable.h>
36 #include <asm/ppcdebug.h>
37 #include <asm/unistd.h>
38 #include <asm/cacheflush.h>
43 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
45 #define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs))
46 #define FP_REGS_SIZE sizeof(elf_fpregset_t)
48 #define TRAMP_TRACEBACK 3
52 * When we have signals to deliver, we set up on the user stack,
53 * going down from the original stack pointer:
54 * 1) a rt_sigframe struct which contains the ucontext
55 * 2) a gap of __SIGNAL_FRAMESIZE bytes which acts as a dummy caller
56 * frame for the signal handler.
60 /* sys_rt_sigreturn requires the ucontext be the first field */
62 unsigned long _unused[2];
63 unsigned int tramp[TRAMP_SIZE];
64 struct siginfo *pinfo;
67 /* 64 bit ABI allows for 288 bytes below sp before decrementing it. */
69 } __attribute__ ((aligned (16)));
73 * Atomically swap in the new signal mask, and wait for a signal.
75 long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, int p3, int p4,
76 int p6, int p7, struct pt_regs *regs)
78 sigset_t saveset, newset;
80 /* XXX: Don't preclude handling different sized sigset_t's. */
81 if (sigsetsize != sizeof(sigset_t))
84 if (copy_from_user(&newset, unewset, sizeof(newset)))
86 sigdelsetmask(&newset, ~_BLOCKABLE);
88 spin_lock_irq(¤t->sighand->siglock);
89 saveset = current->blocked;
90 current->blocked = newset;
92 spin_unlock_irq(¤t->sighand->siglock);
94 regs->result = -EINTR;
96 regs->ccr |= 0x10000000;
98 current->state = TASK_INTERRUPTIBLE;
100 if (do_signal(&saveset, regs))
105 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r5,
106 unsigned long r6, unsigned long r7, unsigned long r8,
107 struct pt_regs *regs)
109 return do_sigaltstack(uss, uoss, regs->gpr[1]);
114 * Set up the sigcontext for the signal frame.
117 static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
118 int signr, sigset_t *set, unsigned long handler)
120 /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the
121 * process never used altivec yet (MSR_VEC is zero in pt_regs of
122 * the context). This is very important because we must ensure we
123 * don't lose the VRSAVE content that may have been set prior to
124 * the process doing its first vector operation
125 * Userland shall check AT_HWCAP to know wether it can rely on the
126 * v_regs pointer or not
128 #ifdef CONFIG_ALTIVEC
129 elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
133 flush_fp_to_thread(current);
135 /* Make sure signal doesn't get spurrious FP exceptions */
136 current->thread.fpscr = 0;
138 #ifdef CONFIG_ALTIVEC
139 err |= __put_user(v_regs, &sc->v_regs);
141 /* save altivec registers */
142 if (current->thread.used_vr) {
143 flush_altivec_to_thread(current);
144 /* Copy 33 vec registers (vr0..31 and vscr) to the stack */
145 err |= __copy_to_user(v_regs, current->thread.vr, 33 * sizeof(vector128));
146 /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
147 * contains valid data.
149 regs->msr |= MSR_VEC;
151 /* We always copy to/from vrsave, it's 0 if we don't have or don't
154 err |= __put_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
155 #else /* CONFIG_ALTIVEC */
156 err |= __put_user(0, &sc->v_regs);
157 #endif /* CONFIG_ALTIVEC */
158 err |= __put_user(&sc->gp_regs, &sc->regs);
159 err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
160 err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
161 err |= __put_user(signr, &sc->signal);
162 err |= __put_user(handler, &sc->handler);
164 err |= __put_user(set->sig[0], &sc->oldmask);
170 * Restore the sigcontext from the signal frame.
173 static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
174 struct sigcontext __user *sc)
176 #ifdef CONFIG_ALTIVEC
177 elf_vrreg_t __user *v_regs;
179 unsigned long err = 0;
180 unsigned long save_r13 = 0;
181 elf_greg_t *gregs = (elf_greg_t *)regs;
182 #ifdef CONFIG_ALTIVEC
187 /* If this is not a signal return, we preserve the TLS in r13 */
189 save_r13 = regs->gpr[13];
191 /* copy everything before MSR */
192 err |= __copy_from_user(regs, &sc->gp_regs,
193 PT_MSR*sizeof(unsigned long));
195 /* skip MSR and SOFTE */
196 for (i = PT_MSR+1; i <= PT_RESULT; i++) {
199 err |= __get_user(gregs[i], &sc->gp_regs[i]);
203 regs->gpr[13] = save_r13;
204 err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
206 err |= __get_user(set->sig[0], &sc->oldmask);
208 #ifdef CONFIG_ALTIVEC
209 err |= __get_user(v_regs, &sc->v_regs);
210 err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
213 /* Copy 33 vec registers (vr0..31 and vscr) from the stack */
214 if (v_regs != 0 && (msr & MSR_VEC) != 0)
215 err |= __copy_from_user(current->thread.vr, v_regs,
216 33 * sizeof(vector128));
217 else if (current->thread.used_vr)
218 memset(current->thread.vr, 0, 33 * sizeof(vector128));
219 /* Always get VRSAVE back */
221 err |= __get_user(current->thread.vrsave, (u32 __user *)&v_regs[33]);
223 current->thread.vrsave = 0;
224 #endif /* CONFIG_ALTIVEC */
228 if (last_task_used_math == current)
229 last_task_used_math = NULL;
230 if (last_task_used_altivec == current)
231 last_task_used_altivec = NULL;
234 /* Force reload of FP/VEC */
235 regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC);
241 * Allocate space for the signal frame
243 static inline void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
248 /* Default to using normal stack */
249 newsp = regs->gpr[1];
251 if (ka->sa.sa_flags & SA_ONSTACK) {
252 if (! on_sig_stack(regs->gpr[1]))
253 newsp = (current->sas_ss_sp + current->sas_ss_size);
256 return (void __user *)((newsp - frame_size) & -16ul);
260 * Setup the trampoline code on the stack
262 static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp)
267 /* addi r1, r1, __SIGNAL_FRAMESIZE # Pop the dummy stackframe */
268 err |= __put_user(0x38210000UL | (__SIGNAL_FRAMESIZE & 0xffff), &tramp[0]);
269 /* li r0, __NR_[rt_]sigreturn| */
270 err |= __put_user(0x38000000UL | (syscall & 0xffff), &tramp[1]);
272 err |= __put_user(0x44000002UL, &tramp[2]);
274 /* Minimal traceback info */
275 for (i=TRAMP_TRACEBACK; i < TRAMP_SIZE ;i++)
276 err |= __put_user(0, &tramp[i]);
279 flush_icache_range((unsigned long) &tramp[0],
280 (unsigned long) &tramp[TRAMP_SIZE]);
286 * Restore the user process's signal mask (also used by signal32.c)
288 void restore_sigmask(sigset_t *set)
290 sigdelsetmask(set, ~_BLOCKABLE);
291 spin_lock_irq(¤t->sighand->siglock);
292 current->blocked = *set;
294 spin_unlock_irq(¤t->sighand->siglock);
299 * Handle {get,set,swap}_context operations
301 int sys_swapcontext(struct ucontext __user *old_ctx,
302 struct ucontext __user *new_ctx,
303 long ctx_size, long r6, long r7, long r8, struct pt_regs *regs)
308 /* Context size is for future use. Right now, we only make sure
309 * we are passed something we understand
311 if (ctx_size < sizeof(struct ucontext))
314 if (old_ctx != NULL) {
315 if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
316 || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0)
317 || __copy_to_user(&old_ctx->uc_sigmask,
318 ¤t->blocked, sizeof(sigset_t)))
323 if (!access_ok(VERIFY_READ, new_ctx, sizeof(*new_ctx))
324 || __get_user(tmp, (u8 __user *) new_ctx)
325 || __get_user(tmp, (u8 __user *) (new_ctx + 1) - 1))
329 * If we get a fault copying the context into the kernel's
330 * image of the user's registers, we can't just return -EFAULT
331 * because the user's registers will be corrupted. For instance
332 * the NIP value may have been updated but not some of the
333 * other registers. Given that we have done the access_ok
334 * and successfully read the first and last bytes of the region
335 * above, this should only happen in an out-of-memory situation
336 * or if another thread unmaps the region containing the context.
337 * We kill the task with a SIGSEGV in this situation.
340 if (__copy_from_user(&set, &new_ctx->uc_sigmask, sizeof(set)))
342 restore_sigmask(&set);
343 if (restore_sigcontext(regs, NULL, 0, &new_ctx->uc_mcontext))
346 /* This returns like rt_sigreturn */
352 * Do a signal return; undo the signal stack.
355 int sys_rt_sigreturn(unsigned long r3, unsigned long r4, unsigned long r5,
356 unsigned long r6, unsigned long r7, unsigned long r8,
357 struct pt_regs *regs)
359 struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1];
362 /* Always make any pending restarted system calls return -EINTR */
363 current_thread_info()->restart_block.fn = do_no_restart_syscall;
365 if (!access_ok(VERIFY_READ, uc, sizeof(*uc)))
368 if (__copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
370 restore_sigmask(&set);
371 if (restore_sigcontext(regs, NULL, 1, &uc->uc_mcontext))
374 /* do_sigaltstack expects a __user pointer and won't modify
375 * what's in there anyway
377 do_sigaltstack(&uc->uc_stack, NULL, regs->gpr[1]);
383 printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n",
384 regs, uc, &uc->uc_mcontext);
386 force_sig(SIGSEGV, current);
390 static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info,
391 sigset_t *set, struct pt_regs *regs)
393 /* Handler is *really* a pointer to the function descriptor for
394 * the signal routine. The first entry in the function
395 * descriptor is the entry address of signal and the second
396 * entry is the TOC value we need to use.
398 func_descr_t __user *funct_desc_ptr;
399 struct rt_sigframe __user *frame;
400 unsigned long newsp = 0;
403 frame = get_sigframe(ka, regs, sizeof(*frame));
405 if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
408 err |= __put_user(&frame->info, &frame->pinfo);
409 err |= __put_user(&frame->uc, &frame->puc);
410 err |= copy_siginfo_to_user(&frame->info, info);
414 /* Create the ucontext. */
415 err |= __put_user(0, &frame->uc.uc_flags);
416 err |= __put_user(0, &frame->uc.uc_link);
417 err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
418 err |= __put_user(sas_ss_flags(regs->gpr[1]),
419 &frame->uc.uc_stack.ss_flags);
420 err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
421 err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, signr, NULL,
422 (unsigned long)ka->sa.sa_handler);
423 err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
427 /* Set up to return from userspace. */
428 if (vdso64_rt_sigtramp && current->thread.vdso_base) {
429 regs->link = current->thread.vdso_base + vdso64_rt_sigtramp;
431 err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
434 regs->link = (unsigned long) &frame->tramp[0];
436 funct_desc_ptr = (func_descr_t __user *) ka->sa.sa_handler;
438 /* Allocate a dummy caller frame for the signal handler. */
439 newsp = (unsigned long)frame - __SIGNAL_FRAMESIZE;
440 err |= put_user(regs->gpr[1], (unsigned long __user *)newsp);
442 /* Set up "regs" so we "return" to the signal handler. */
443 err |= get_user(regs->nip, &funct_desc_ptr->entry);
444 regs->gpr[1] = newsp;
445 err |= get_user(regs->gpr[2], &funct_desc_ptr->toc);
446 regs->gpr[3] = signr;
448 if (ka->sa.sa_flags & SA_SIGINFO) {
449 err |= get_user(regs->gpr[4], (unsigned long __user *)&frame->pinfo);
450 err |= get_user(regs->gpr[5], (unsigned long __user *)&frame->puc);
451 regs->gpr[6] = (unsigned long) frame;
453 regs->gpr[4] = (unsigned long)&frame->uc.uc_mcontext;
458 if (test_thread_flag(TIF_SINGLESTEP))
459 ptrace_notify(SIGTRAP);
465 printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n",
468 force_sigsegv(signr, current);
474 * OK, we're invoking a handler
476 static int handle_signal(unsigned long sig, struct k_sigaction *ka,
477 siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
481 /* Set up Signal Frame */
482 ret = setup_rt_frame(sig, ka, info, oldset, regs);
485 spin_lock_irq(¤t->sighand->siglock);
486 sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
487 if (!(ka->sa.sa_flags & SA_NODEFER))
488 sigaddset(¤t->blocked,sig);
490 spin_unlock_irq(¤t->sighand->siglock);
496 static inline void syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
498 switch ((int)regs->result) {
499 case -ERESTART_RESTARTBLOCK:
500 case -ERESTARTNOHAND:
501 /* ERESTARTNOHAND means that the syscall should only be
502 * restarted if there was no handler for the signal, and since
503 * we only get here if there is a handler, we dont restart.
505 regs->result = -EINTR;
508 /* ERESTARTSYS means to restart the syscall if there is no
509 * handler or the handler was registered with SA_RESTART
511 if (!(ka->sa.sa_flags & SA_RESTART)) {
512 regs->result = -EINTR;
516 case -ERESTARTNOINTR:
517 /* ERESTARTNOINTR means that the syscall should be
518 * called again after the signal handler returns.
520 regs->gpr[3] = regs->orig_gpr3;
528 * Note that 'init' is a special process: it doesn't get signals it doesn't
529 * want to handle. Thus you cannot kill init even with a SIGKILL even by
532 int do_signal(sigset_t *oldset, struct pt_regs *regs)
536 struct k_sigaction ka;
539 * If the current thread is 32 bit - invoke the
540 * 32 bit signal handling code
542 if (test_thread_flag(TIF_32BIT))
543 return do_signal32(oldset, regs);
546 oldset = ¤t->blocked;
548 signr = get_signal_to_deliver(&info, &ka, regs, NULL);
550 /* Whee! Actually deliver the signal. */
551 if (TRAP(regs) == 0x0C00)
552 syscall_restart(regs, &ka);
555 * Reenable the DABR before delivering the signal to
556 * user space. The DABR will have been cleared if it
557 * triggered inside the kernel.
559 if (current->thread.dabr)
560 set_dabr(current->thread.dabr);
562 return handle_signal(signr, &ka, &info, oldset, regs);
565 if (TRAP(regs) == 0x0C00) { /* System Call! */
566 if ((int)regs->result == -ERESTARTNOHAND ||
567 (int)regs->result == -ERESTARTSYS ||
568 (int)regs->result == -ERESTARTNOINTR) {
569 regs->gpr[3] = regs->orig_gpr3;
570 regs->nip -= 4; /* Back up & retry system call */
572 } else if ((int)regs->result == -ERESTART_RESTARTBLOCK) {
573 regs->gpr[0] = __NR_restart_syscall;
581 EXPORT_SYMBOL(do_signal);