git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/ti_usb_3410_5052.c

   1 /* vi: ts=8 sw=8
   2  *
   3  * TI 3410/5052 USB Serial Driver
   4  *
   5  * Copyright (C) 2004 Texas Instruments
   6  *
   7  * This driver is based on the Linux io_ti driver, which is
   8  *   Copyright (C) 2000-2002 Inside Out Networks
   9  *   Copyright (C) 2001-2002 Greg Kroah-Hartman
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * For questions or problems with this driver, contact Texas Instruments
  17  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  18  * Peter Berger <pberger@brimson.com>.
  19  *
  20  * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
  21  * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
  22  * configuration.
  23  *
  24  * #!/bin/bash
  25  *
  26  * BOOT_CONFIG=1
  27  * ACTIVE_CONFIG=2
  28  *
  29  * if [[ "$ACTION" != "add" ]]
  30  * then
  31  *      exit
  32  * fi
  33  *
  34  * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
  35  *
  36  * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
  37  * then
  38  *      exit
  39  * fi
  40  *
  41  * PRODUCT=${PRODUCT%/?*}               # delete version
  42  * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
  43  * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
  44  *
  45  * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
  46  *
  47  * function scan() {
  48  *      s=$1
  49  *      shift
  50  *      for i
  51  *      do
  52  *              if [[ $s -eq $i ]]
  53  *              then
  54  *                      return 0
  55  *              fi
  56  *      done
  57  *      return 1
  58  * }
  59  *
  60  * IFS=$IFS,
  61  *
  62  * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
  63  * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
  64  * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
  65  * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
  66  * then
  67  *      echo $ACTIVE_CONFIG > $CONFIG_PATH
  68  * fi
  69  */
  70
  71 #include <linux/kernel.h>
  72 #include <linux/errno.h>
  73 #include <linux/firmware.h>
  74 #include <linux/init.h>
  75 #include <linux/slab.h>
  76 #include <linux/tty.h>
  77 #include <linux/tty_driver.h>
  78 #include <linux/tty_flip.h>
  79 #include <linux/module.h>
  80 #include <linux/spinlock.h>
  81 #include <linux/ioctl.h>
  82 #include <linux/serial.h>
  83 #include <linux/circ_buf.h>
  84 #include <linux/mutex.h>
  85 #include <linux/uaccess.h>
  86 #include <linux/usb.h>
  87 #include <linux/usb/serial.h>
  88
  89 #include "ti_usb_3410_5052.h"
  90
  91 /* Defines */
  92
  93 #define TI_DRIVER_VERSION       "v0.9"
  94 #define TI_DRIVER_AUTHOR        "Al Borchers <alborchers@steinerpoint.com>"
  95 #define TI_DRIVER_DESC          "TI USB 3410/5052 Serial Driver"
  96
  97 #define TI_FIRMWARE_BUF_SIZE    16284
  98
  99 #define TI_WRITE_BUF_SIZE       1024
 100
 101 #define TI_TRANSFER_TIMEOUT     2
 102
 103 #define TI_DEFAULT_LOW_LATENCY  0
 104 #define TI_DEFAULT_CLOSING_WAIT 4000            /* in .01 secs */
 105
 106 /* supported setserial flags */
 107 #define TI_SET_SERIAL_FLAGS     (ASYNC_LOW_LATENCY)
 108
 109 /* read urb states */
 110 #define TI_READ_URB_RUNNING     0
 111 #define TI_READ_URB_STOPPING    1
 112 #define TI_READ_URB_STOPPED     2
 113
 114 #define TI_EXTRA_VID_PID_COUNT  5
 115
 116
 117 /* Structures */
 118
 119 struct ti_port {
 120         int                     tp_is_open;
 121         __u8                    tp_msr;
 122         __u8                    tp_lsr;
 123         __u8                    tp_shadow_mcr;
 124         __u8                    tp_uart_mode;   /* 232 or 485 modes */
 125         unsigned int            tp_uart_base_addr;
 126         int                     tp_flags;
 127         int                     tp_closing_wait;/* in .01 secs */
 128         struct async_icount     tp_icount;
 129         wait_queue_head_t       tp_msr_wait;    /* wait for msr change */
 130         wait_queue_head_t       tp_write_wait;
 131         struct ti_device        *tp_tdev;
 132         struct usb_serial_port  *tp_port;
 133         spinlock_t              tp_lock;
 134         int                     tp_read_urb_state;
 135         int                     tp_write_urb_in_use;
 136         struct circ_buf         *tp_write_buf;
 137 };
 138
 139 struct ti_device {
 140         struct mutex            td_open_close_lock;
 141         int                     td_open_port_count;
 142         struct usb_serial       *td_serial;
 143         int                     td_is_3410;
 144         int                     td_urb_error;
 145 };
 146
 147
 148 /* Function Declarations */
 149
 150 static int ti_startup(struct usb_serial *serial);
 151 static void ti_shutdown(struct usb_serial *serial);
 152 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
 153                 struct file *file);
 154 static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
 155                 struct file *file);
 156 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 157                 const unsigned char *data, int count);
 158 static int ti_write_room(struct tty_struct *tty);
 159 static int ti_chars_in_buffer(struct tty_struct *tty);
 160 static void ti_throttle(struct tty_struct *tty);
 161 static void ti_unthrottle(struct tty_struct *tty);
 162 static int ti_ioctl(struct tty_struct *tty, struct file *file,
 163                 unsigned int cmd, unsigned long arg);
 164 static void ti_set_termios(struct tty_struct *tty,
 165                 struct usb_serial_port *port, struct ktermios *old_termios);
 166 static int ti_tiocmget(struct tty_struct *tty, struct file *file);
 167 static int ti_tiocmset(struct tty_struct *tty, struct file *file,
 168                 unsigned int set, unsigned int clear);
 169 static void ti_break(struct tty_struct *tty, int break_state);
 170 static void ti_interrupt_callback(struct urb *urb);
 171 static void ti_bulk_in_callback(struct urb *urb);
 172 static void ti_bulk_out_callback(struct urb *urb);
 173
 174 static void ti_recv(struct device *dev, struct tty_struct *tty,
 175         unsigned char *data, int length);
 176 static void ti_send(struct ti_port *tport);
 177 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
 178 static int ti_get_lsr(struct ti_port *tport);
 179 static int ti_get_serial_info(struct ti_port *tport,
 180         struct serial_struct __user *ret_arg);
 181 static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 182         struct serial_struct __user *new_arg);
 183 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
 184
 185 static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush);
 186
 187 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
 188 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
 189
 190 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 191         __u16 moduleid, __u16 value, __u8 *data, int size);
 192 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 193         __u16 moduleid, __u16 value, __u8 *data, int size);
 194
 195 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 196         __u8 mask, __u8 byte);
 197
 198 static int ti_download_firmware(struct ti_device *tdev, int type);
 199
 200 /* circular buffer */
 201 static struct circ_buf *ti_buf_alloc(void);
 202 static void ti_buf_free(struct circ_buf *cb);
 203 static void ti_buf_clear(struct circ_buf *cb);
 204 static int ti_buf_data_avail(struct circ_buf *cb);
 205 static int ti_buf_space_avail(struct circ_buf *cb);
 206 static int ti_buf_put(struct circ_buf *cb, const char *buf, int count);
 207 static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
 208
 209
 210 /* Data */
 211
 212 /* module parameters */
 213 static int debug;
 214 static int low_latency = TI_DEFAULT_LOW_LATENCY;
 215 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 216 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 217 static unsigned int vendor_3410_count;
 218 static ushort product_3410[TI_EXTRA_VID_PID_COUNT];
 219 static unsigned int product_3410_count;
 220 static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT];
 221 static unsigned int vendor_5052_count;
 222 static ushort product_5052[TI_EXTRA_VID_PID_COUNT];
 223 static unsigned int product_5052_count;
 224
 225 /* supported devices */
 226 /* the array dimension is the number of default entries plus */
 227 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 228 /* null entry */
 229 static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
 230         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 231         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 232 };
 233
 234 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 235         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 236         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 237         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 238         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 239 };
 240
 241 static struct usb_device_id ti_id_table_combined[] = {
 242         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 243         { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 244         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 245         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 246         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 247         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 248         { }
 249 };
 250
 251 static struct usb_driver ti_usb_driver = {
 252         .name                   = "ti_usb_3410_5052",
 253         .probe                  = usb_serial_probe,
 254         .disconnect             = usb_serial_disconnect,
 255         .id_table               = ti_id_table_combined,
 256         .no_dynamic_id =        1,
 257 };
 258
 259 static struct usb_serial_driver ti_1port_device = {
 260         .driver = {
 261                 .owner          = THIS_MODULE,
 262                 .name           = "ti_usb_3410_5052_1",
 263         },
 264         .description            = "TI USB 3410 1 port adapter",
 265         .usb_driver             = &ti_usb_driver,
 266         .id_table               = ti_id_table_3410,
 267         .num_ports              = 1,
 268         .attach                 = ti_startup,
 269         .shutdown               = ti_shutdown,
 270         .open                   = ti_open,
 271         .close                  = ti_close,
 272         .write                  = ti_write,
 273         .write_room             = ti_write_room,
 274         .chars_in_buffer        = ti_chars_in_buffer,
 275         .throttle               = ti_throttle,
 276         .unthrottle             = ti_unthrottle,
 277         .ioctl                  = ti_ioctl,
 278         .set_termios            = ti_set_termios,
 279         .tiocmget               = ti_tiocmget,
 280         .tiocmset               = ti_tiocmset,
 281         .break_ctl              = ti_break,
 282         .read_int_callback      = ti_interrupt_callback,
 283         .read_bulk_callback     = ti_bulk_in_callback,
 284         .write_bulk_callback    = ti_bulk_out_callback,
 285 };
 286
 287 static struct usb_serial_driver ti_2port_device = {
 288         .driver = {
 289                 .owner          = THIS_MODULE,
 290                 .name           = "ti_usb_3410_5052_2",
 291         },
 292         .description            = "TI USB 5052 2 port adapter",
 293         .usb_driver             = &ti_usb_driver,
 294         .id_table               = ti_id_table_5052,
 295         .num_ports              = 2,
 296         .attach                 = ti_startup,
 297         .shutdown               = ti_shutdown,
 298         .open                   = ti_open,
 299         .close                  = ti_close,
 300         .write                  = ti_write,
 301         .write_room             = ti_write_room,
 302         .chars_in_buffer        = ti_chars_in_buffer,
 303         .throttle               = ti_throttle,
 304         .unthrottle             = ti_unthrottle,
 305         .ioctl                  = ti_ioctl,
 306         .set_termios            = ti_set_termios,
 307         .tiocmget               = ti_tiocmget,
 308         .tiocmset               = ti_tiocmset,
 309         .break_ctl              = ti_break,
 310         .read_int_callback      = ti_interrupt_callback,
 311         .read_bulk_callback     = ti_bulk_in_callback,
 312         .write_bulk_callback    = ti_bulk_out_callback,
 313 };
 314
 315
 316 /* Module */
 317
 318 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
 319 MODULE_DESCRIPTION(TI_DRIVER_DESC);
 320 MODULE_VERSION(TI_DRIVER_VERSION);
 321 MODULE_LICENSE("GPL");
 322
 323 MODULE_FIRMWARE("ti_3410.fw");
 324 MODULE_FIRMWARE("ti_5052.fw");
 325
 326 module_param(debug, bool, S_IRUGO | S_IWUSR);
 327 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 328
 329 module_param(low_latency, bool, S_IRUGO | S_IWUSR);
 330 MODULE_PARM_DESC(low_latency,
 331                 "TTY low_latency flag, 0=off, 1=on, default is off");
 332
 333 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 334 MODULE_PARM_DESC(closing_wait,
 335     "Maximum wait for data to drain in close, in .01 secs, default is 4000");
 336
 337 module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
 338 MODULE_PARM_DESC(vendor_3410,
 339                 "Vendor ids for 3410 based devices, 1-5 short integers");
 340 module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
 341 MODULE_PARM_DESC(product_3410,
 342                 "Product ids for 3410 based devices, 1-5 short integers");
 343 module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
 344 MODULE_PARM_DESC(vendor_5052,
 345                 "Vendor ids for 5052 based devices, 1-5 short integers");
 346 module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
 347 MODULE_PARM_DESC(product_5052,
 348                 "Product ids for 5052 based devices, 1-5 short integers");
 349
 350 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 351
 352
 353 /* Functions */
 354
 355 static int __init ti_init(void)
 356 {
 357         int i, j;
 358         int ret;
 359
 360         /* insert extra vendor and product ids */
 361         j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
 362         for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
 363                 ti_id_table_3410[j].idVendor = vendor_3410[i];
 364                 ti_id_table_3410[j].idProduct = product_3410[i];
 365                 ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 366         }
 367         j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
 368         for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
 369                 ti_id_table_5052[j].idVendor = vendor_5052[i];
 370                 ti_id_table_5052[j].idProduct = product_5052[i];
 371                 ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 372         }
 373
 374         ret = usb_serial_register(&ti_1port_device);
 375         if (ret)
 376                 goto failed_1port;
 377         ret = usb_serial_register(&ti_2port_device);
 378         if (ret)
 379                 goto failed_2port;
 380
 381         ret = usb_register(&ti_usb_driver);
 382         if (ret)
 383                 goto failed_usb;
 384
 385         printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
 386                TI_DRIVER_DESC "\n");
 387
 388         return 0;
 389
 390 failed_usb:
 391         usb_serial_deregister(&ti_2port_device);
 392 failed_2port:
 393         usb_serial_deregister(&ti_1port_device);
 394 failed_1port:
 395         return ret;
 396 }
 397
 398
 399 static void __exit ti_exit(void)
 400 {
 401         usb_serial_deregister(&ti_1port_device);
 402         usb_serial_deregister(&ti_2port_device);
 403         usb_deregister(&ti_usb_driver);
 404 }
 405
 406
 407 module_init(ti_init);
 408 module_exit(ti_exit);
 409
 410
 411 static int ti_startup(struct usb_serial *serial)
 412 {
 413         struct ti_device *tdev;
 414         struct ti_port *tport;
 415         struct usb_device *dev = serial->dev;
 416         int status;
 417         int i;
 418
 419
 420         dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
 421             __func__, le16_to_cpu(dev->descriptor.idProduct),
 422             dev->descriptor.bNumConfigurations,
 423             dev->actconfig->desc.bConfigurationValue);
 424
 425         /* create device structure */
 426         tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
 427         if (tdev == NULL) {
 428                 dev_err(&dev->dev, "%s - out of memory\n", __func__);
 429                 return -ENOMEM;
 430         }
 431         mutex_init(&tdev->td_open_close_lock);
 432         tdev->td_serial = serial;
 433         usb_set_serial_data(serial, tdev);
 434
 435         /* determine device type */
 436         if (usb_match_id(serial->interface, ti_id_table_3410))
 437                 tdev->td_is_3410 = 1;
 438         dbg("%s - device type is %s", __func__,
 439                                 tdev->td_is_3410 ? "3410" : "5052");
 440
 441         /* if we have only 1 configuration, download firmware */
 442         if (dev->descriptor.bNumConfigurations == 1) {
 443                 if (tdev->td_is_3410)
 444                         status = ti_download_firmware(tdev, 3410);
 445                 else
 446                         status = ti_download_firmware(tdev, 5052);
 447                 if (status)
 448                         goto free_tdev;
 449
 450                 /* 3410 must be reset, 5052 resets itself */
 451                 if (tdev->td_is_3410) {
 452                         msleep_interruptible(100);
 453                         usb_reset_device(dev);
 454                 }
 455
 456                 status = -ENODEV;
 457                 goto free_tdev;
 458         }
 459
 460         /* the second configuration must be set (in sysfs by hotplug script) */
 461         if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
 462                 status = -ENODEV;
 463                 goto free_tdev;
 464         }
 465
 466         /* set up port structures */
 467         for (i = 0; i < serial->num_ports; ++i) {
 468                 tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
 469                 if (tport == NULL) {
 470                         dev_err(&dev->dev, "%s - out of memory\n", __func__);
 471                         status = -ENOMEM;
 472                         goto free_tports;
 473                 }
 474                 spin_lock_init(&tport->tp_lock);
 475                 tport->tp_uart_base_addr = (i == 0 ?
 476                                 TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
 477                 tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
 478                 tport->tp_closing_wait = closing_wait;
 479                 init_waitqueue_head(&tport->tp_msr_wait);
 480                 init_waitqueue_head(&tport->tp_write_wait);
 481                 tport->tp_write_buf = ti_buf_alloc();
 482                 if (tport->tp_write_buf == NULL) {
 483                         dev_err(&dev->dev, "%s - out of memory\n", __func__);
 484                         kfree(tport);
 485                         status = -ENOMEM;
 486                         goto free_tports;
 487                 }
 488                 tport->tp_port = serial->port[i];
 489                 tport->tp_tdev = tdev;
 490                 usb_set_serial_port_data(serial->port[i], tport);
 491                 tport->tp_uart_mode = 0;        /* default is RS232 */
 492         }
 493
 494         return 0;
 495
 496 free_tports:
 497         for (--i; i >= 0; --i) {
 498                 tport = usb_get_serial_port_data(serial->port[i]);
 499                 ti_buf_free(tport->tp_write_buf);
 500                 kfree(tport);
 501                 usb_set_serial_port_data(serial->port[i], NULL);
 502         }
 503 free_tdev:
 504         kfree(tdev);
 505         usb_set_serial_data(serial, NULL);
 506         return status;
 507 }
 508
 509
 510 static void ti_shutdown(struct usb_serial *serial)
 511 {
 512         int i;
 513         struct ti_device *tdev = usb_get_serial_data(serial);
 514         struct ti_port *tport;
 515
 516         dbg("%s", __func__);
 517
 518         for (i = 0; i < serial->num_ports; ++i) {
 519                 tport = usb_get_serial_port_data(serial->port[i]);
 520                 if (tport) {
 521                         ti_buf_free(tport->tp_write_buf);
 522                         kfree(tport);
 523                         usb_set_serial_port_data(serial->port[i], NULL);
 524                 }
 525         }
 526
 527         kfree(tdev);
 528         usb_set_serial_data(serial, NULL);
 529 }
 530
 531
 532 static int ti_open(struct tty_struct *tty,
 533                         struct usb_serial_port *port, struct file *file)
 534 {
 535         struct ti_port *tport = usb_get_serial_port_data(port);
 536         struct ti_device *tdev;
 537         struct usb_device *dev;
 538         struct urb *urb;
 539         int port_number;
 540         int status;
 541         __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS |
 542                              TI_PIPE_TIMEOUT_ENABLE |
 543                              (TI_TRANSFER_TIMEOUT << 2));
 544
 545         dbg("%s - port %d", __func__, port->number);
 546
 547         if (tport == NULL)
 548                 return -ENODEV;
 549
 550         dev = port->serial->dev;
 551         tdev = tport->tp_tdev;
 552
 553         /* only one open on any port on a device at a time */
 554         if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 555                 return -ERESTARTSYS;
 556
 557         if (tty)
 558                 tty->low_latency =
 559                                 (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 560
 561         port_number = port->number - port->serial->minor;
 562
 563         memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
 564
 565         tport->tp_msr = 0;
 566         tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
 567
 568         /* start interrupt urb the first time a port is opened on this device */
 569         if (tdev->td_open_port_count == 0) {
 570                 dbg("%s - start interrupt in urb", __func__);
 571                 urb = tdev->td_serial->port[0]->interrupt_in_urb;
 572                 if (!urb) {
 573                         dev_err(&port->dev, "%s - no interrupt urb\n",
 574                                                                 __func__);
 575                         status = -EINVAL;
 576                         goto release_lock;
 577                 }
 578                 urb->complete = ti_interrupt_callback;
 579                 urb->context = tdev;
 580                 urb->dev = dev;
 581                 status = usb_submit_urb(urb, GFP_KERNEL);
 582                 if (status) {
 583                         dev_err(&port->dev,
 584                                 "%s - submit interrupt urb failed, %d\n",
 585                                         __func__, status);
 586                         goto release_lock;
 587                 }
 588         }
 589
 590         if (tty)
 591                 ti_set_termios(tty, port, tty->termios);
 592
 593         dbg("%s - sending TI_OPEN_PORT", __func__);
 594         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 595                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 596         if (status) {
 597                 dev_err(&port->dev, "%s - cannot send open command, %d\n",
 598                                                         __func__, status);
 599                 goto unlink_int_urb;
 600         }
 601
 602         dbg("%s - sending TI_START_PORT", __func__);
 603         status = ti_command_out_sync(tdev, TI_START_PORT,
 604                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 605         if (status) {
 606                 dev_err(&port->dev, "%s - cannot send start command, %d\n",
 607                                                         __func__, status);
 608                 goto unlink_int_urb;
 609         }
 610
 611         dbg("%s - sending TI_PURGE_PORT", __func__);
 612         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 613                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
 614         if (status) {
 615                 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
 616                                                         __func__, status);
 617                 goto unlink_int_urb;
 618         }
 619         status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 620                 (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
 621         if (status) {
 622                 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
 623                                                         __func__, status);
 624                 goto unlink_int_urb;
 625         }
 626
 627         /* reset the data toggle on the bulk endpoints to work around bug in
 628          * host controllers where things get out of sync some times */
 629         usb_clear_halt(dev, port->write_urb->pipe);
 630         usb_clear_halt(dev, port->read_urb->pipe);
 631
 632         if (tty)
 633                 ti_set_termios(tty, port, tty->termios);
 634
 635         dbg("%s - sending TI_OPEN_PORT (2)", __func__);
 636         status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 637                 (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 638         if (status) {
 639                 dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
 640                                                         __func__, status);
 641                 goto unlink_int_urb;
 642         }
 643
 644         dbg("%s - sending TI_START_PORT (2)", __func__);
 645         status = ti_command_out_sync(tdev, TI_START_PORT,
 646                 (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 647         if (status) {
 648                 dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
 649                                                         __func__, status);
 650                 goto unlink_int_urb;
 651         }
 652
 653         /* start read urb */
 654         dbg("%s - start read urb", __func__);
 655         urb = port->read_urb;
 656         if (!urb) {
 657                 dev_err(&port->dev, "%s - no read urb\n", __func__);
 658                 status = -EINVAL;
 659                 goto unlink_int_urb;
 660         }
 661         tport->tp_read_urb_state = TI_READ_URB_RUNNING;
 662         urb->complete = ti_bulk_in_callback;
 663         urb->context = tport;
 664         urb->dev = dev;
 665         status = usb_submit_urb(urb, GFP_KERNEL);
 666         if (status) {
 667                 dev_err(&port->dev, "%s - submit read urb failed, %d\n",
 668                                                         __func__, status);
 669                 goto unlink_int_urb;
 670         }
 671
 672         tport->tp_is_open = 1;
 673         ++tdev->td_open_port_count;
 674
 675         goto release_lock;
 676
 677 unlink_int_urb:
 678         if (tdev->td_open_port_count == 0)
 679                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 680 release_lock:
 681         mutex_unlock(&tdev->td_open_close_lock);
 682         dbg("%s - exit %d", __func__, status);
 683         return status;
 684 }
 685
 686
 687 static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
 688                                                         struct file *file)
 689 {
 690         struct ti_device *tdev;
 691         struct ti_port *tport;
 692         int port_number;
 693         int status;
 694         int do_unlock;
 695
 696         dbg("%s - port %d", __func__, port->number);
 697
 698         tdev = usb_get_serial_data(port->serial);
 699         tport = usb_get_serial_port_data(port);
 700         if (tdev == NULL || tport == NULL)
 701                 return;
 702
 703         tport->tp_is_open = 0;
 704
 705         ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1);
 706
 707         usb_kill_urb(port->read_urb);
 708         usb_kill_urb(port->write_urb);
 709         tport->tp_write_urb_in_use = 0;
 710
 711         port_number = port->number - port->serial->minor;
 712
 713         dbg("%s - sending TI_CLOSE_PORT", __func__);
 714         status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
 715                      (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 716         if (status)
 717                 dev_err(&port->dev,
 718                         "%s - cannot send close port command, %d\n"
 719                                                         , __func__, status);
 720
 721         /* if mutex_lock is interrupted, continue anyway */
 722         do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
 723         --tport->tp_tdev->td_open_port_count;
 724         if (tport->tp_tdev->td_open_port_count <= 0) {
 725                 /* last port is closed, shut down interrupt urb */
 726                 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 727                 tport->tp_tdev->td_open_port_count = 0;
 728         }
 729         if (do_unlock)
 730                 mutex_unlock(&tdev->td_open_close_lock);
 731
 732         dbg("%s - exit", __func__);
 733 }
 734
 735
 736 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 737                         const unsigned char *data, int count)
 738 {
 739         struct ti_port *tport = usb_get_serial_port_data(port);
 740         unsigned long flags;
 741
 742         dbg("%s - port %d", __func__, port->number);
 743
 744         if (count == 0) {
 745                 dbg("%s - write request of 0 bytes", __func__);
 746                 return 0;
 747         }
 748
 749         if (tport == NULL || !tport->tp_is_open)
 750                 return -ENODEV;
 751
 752         spin_lock_irqsave(&tport->tp_lock, flags);
 753         count = ti_buf_put(tport->tp_write_buf, data, count);
 754         spin_unlock_irqrestore(&tport->tp_lock, flags);
 755
 756         ti_send(tport);
 757
 758         return count;
 759 }
 760
 761
 762 static int ti_write_room(struct tty_struct *tty)
 763 {
 764         struct usb_serial_port *port = tty->driver_data;
 765         struct ti_port *tport = usb_get_serial_port_data(port);
 766         int room = 0;
 767         unsigned long flags;
 768
 769         dbg("%s - port %d", __func__, port->number);
 770
 771         if (tport == NULL)
 772                 return -ENODEV;
 773
 774         spin_lock_irqsave(&tport->tp_lock, flags);
 775         room = ti_buf_space_avail(tport->tp_write_buf);
 776         spin_unlock_irqrestore(&tport->tp_lock, flags);
 777
 778         dbg("%s - returns %d", __func__, room);
 779         return room;
 780 }
 781
 782
 783 static int ti_chars_in_buffer(struct tty_struct *tty)
 784 {
 785         struct usb_serial_port *port = tty->driver_data;
 786         struct ti_port *tport = usb_get_serial_port_data(port);
 787         int chars = 0;
 788         unsigned long flags;
 789
 790         dbg("%s - port %d", __func__, port->number);
 791
 792         if (tport == NULL)
 793                 return -ENODEV;
 794
 795         spin_lock_irqsave(&tport->tp_lock, flags);
 796         chars = ti_buf_data_avail(tport->tp_write_buf);
 797         spin_unlock_irqrestore(&tport->tp_lock, flags);
 798
 799         dbg("%s - returns %d", __func__, chars);
 800         return chars;
 801 }
 802
 803
 804 static void ti_throttle(struct tty_struct *tty)
 805 {
 806         struct usb_serial_port *port = tty->driver_data;
 807         struct ti_port *tport = usb_get_serial_port_data(port);
 808
 809         dbg("%s - port %d", __func__, port->number);
 810
 811         if (tport == NULL)
 812                 return;
 813
 814         if (I_IXOFF(tty) || C_CRTSCTS(tty))
 815                 ti_stop_read(tport, tty);
 816
 817 }
 818
 819
 820 static void ti_unthrottle(struct tty_struct *tty)
 821 {
 822         struct usb_serial_port *port = tty->driver_data;
 823         struct ti_port *tport = usb_get_serial_port_data(port);
 824         int status;
 825
 826         dbg("%s - port %d", __func__, port->number);
 827
 828         if (tport == NULL)
 829                 return;
 830
 831         if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 832                 status = ti_restart_read(tport, tty);
 833                 if (status)
 834                         dev_err(&port->dev, "%s - cannot restart read, %d\n",
 835                                                         __func__, status);
 836         }
 837 }
 838
 839
 840 static int ti_ioctl(struct tty_struct *tty, struct file *file,
 841         unsigned int cmd, unsigned long arg)
 842 {
 843         struct usb_serial_port *port = tty->driver_data;
 844         struct ti_port *tport = usb_get_serial_port_data(port);
 845         struct async_icount cnow;
 846         struct async_icount cprev;
 847
 848         dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd);
 849
 850         if (tport == NULL)
 851                 return -ENODEV;
 852
 853         switch (cmd) {
 854         case TIOCGSERIAL:
 855                 dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
 856                 return ti_get_serial_info(tport,
 857                                 (struct serial_struct __user *)arg);
 858         case TIOCSSERIAL:
 859                 dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
 860                 return ti_set_serial_info(tty, tport,
 861                                 (struct serial_struct __user *)arg);
 862         case TIOCMIWAIT:
 863                 dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
 864                 cprev = tport->tp_icount;
 865                 while (1) {
 866                         interruptible_sleep_on(&tport->tp_msr_wait);
 867                         if (signal_pending(current))
 868                                 return -ERESTARTSYS;
 869                         cnow = tport->tp_icount;
 870                         if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
 871                             cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
 872                                 return -EIO; /* no change => error */
 873                         if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 874                             ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 875                             ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
 876                             ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)))
 877                                 return 0;
 878                         cprev = cnow;
 879                 }
 880                 break;
 881         case TIOCGICOUNT:
 882                 dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
 883                                 __func__, port->number,
 884                                 tport->tp_icount.rx, tport->tp_icount.tx);
 885                 if (copy_to_user((void __user *)arg, &tport->tp_icount,
 886                                         sizeof(tport->tp_icount)))
 887                         return -EFAULT;
 888                 return 0;
 889         }
 890         return -ENOIOCTLCMD;
 891 }
 892
 893
 894 static void ti_set_termios(struct tty_struct *tty,
 895                 struct usb_serial_port *port, struct ktermios *old_termios)
 896 {
 897         struct ti_port *tport = usb_get_serial_port_data(port);
 898         struct ti_uart_config *config;
 899         tcflag_t cflag, iflag;
 900         int baud;
 901         int status;
 902         int port_number = port->number - port->serial->minor;
 903         unsigned int mcr;
 904
 905         dbg("%s - port %d", __func__, port->number);
 906
 907         cflag = tty->termios->c_cflag;
 908         iflag = tty->termios->c_iflag;
 909
 910         dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
 911         dbg("%s - old clfag %08x, old iflag %08x", __func__,
 912                                 old_termios->c_cflag, old_termios->c_iflag);
 913
 914         if (tport == NULL)
 915                 return;
 916
 917         config = kmalloc(sizeof(*config), GFP_KERNEL);
 918         if (!config) {
 919                 dev_err(&port->dev, "%s - out of memory\n", __func__);
 920                 return;
 921         }
 922
 923         config->wFlags = 0;
 924
 925         /* these flags must be set */
 926         config->wFlags |= TI_UART_ENABLE_MS_INTS;
 927         config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA;
 928         config->bUartMode = (__u8)(tport->tp_uart_mode);
 929
 930         switch (cflag & CSIZE) {
 931         case CS5:
 932                     config->bDataBits = TI_UART_5_DATA_BITS;
 933                     break;
 934         case CS6:
 935                     config->bDataBits = TI_UART_6_DATA_BITS;
 936                     break;
 937         case CS7:
 938                     config->bDataBits = TI_UART_7_DATA_BITS;
 939                     break;
 940         default:
 941         case CS8:
 942                     config->bDataBits = TI_UART_8_DATA_BITS;
 943                     break;
 944         }
 945
 946         /* CMSPAR isn't supported by this driver */
 947         tty->termios->c_cflag &= ~CMSPAR;
 948
 949         if (cflag & PARENB) {
 950                 if (cflag & PARODD) {
 951                         config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
 952                         config->bParity = TI_UART_ODD_PARITY;
 953                 } else {
 954                         config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
 955                         config->bParity = TI_UART_EVEN_PARITY;
 956                 }
 957         } else {
 958                 config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
 959                 config->bParity = TI_UART_NO_PARITY;
 960         }
 961
 962         if (cflag & CSTOPB)
 963                 config->bStopBits = TI_UART_2_STOP_BITS;
 964         else
 965                 config->bStopBits = TI_UART_1_STOP_BITS;
 966
 967         if (cflag & CRTSCTS) {
 968                 /* RTS flow control must be off to drop RTS for baud rate B0 */
 969                 if ((cflag & CBAUD) != B0)
 970                         config->wFlags |= TI_UART_ENABLE_RTS_IN;
 971                 config->wFlags |= TI_UART_ENABLE_CTS_OUT;
 972         } else {
 973                 tty->hw_stopped = 0;
 974                 ti_restart_read(tport, tty);
 975         }
 976
 977         if (I_IXOFF(tty) || I_IXON(tty)) {
 978                 config->cXon  = START_CHAR(tty);
 979                 config->cXoff = STOP_CHAR(tty);
 980
 981                 if (I_IXOFF(tty))
 982                         config->wFlags |= TI_UART_ENABLE_X_IN;
 983                 else
 984                         ti_restart_read(tport, tty);
 985
 986                 if (I_IXON(tty))
 987                         config->wFlags |= TI_UART_ENABLE_X_OUT;
 988         }
 989
 990         baud = tty_get_baud_rate(tty);
 991         if (!baud)
 992                 baud = 9600;
 993         if (tport->tp_tdev->td_is_3410)
 994                 config->wBaudRate = (__u16)((923077 + baud/2) / baud);
 995         else
 996                 config->wBaudRate = (__u16)((461538 + baud/2) / baud);
 997
 998         /* FIXME: Should calculate resulting baud here and report it back */
 999         if ((cflag & CBAUD) != B0)
1000                 tty_encode_baud_rate(tty, baud, baud);
1001
1002         dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
1003         __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
1004
1005         cpu_to_be16s(&config->wBaudRate);
1006         cpu_to_be16s(&config->wFlags);
1007
1008         status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
1009                 (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
1010                 sizeof(*config));
1011         if (status)
1012                 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
1013                                         __func__, port_number, status);
1014
1015         /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1016         mcr = tport->tp_shadow_mcr;
1017         /* if baud rate is B0, clear RTS and DTR */
1018         if ((cflag & CBAUD) == B0)
1019                 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1020         status = ti_set_mcr(tport, mcr);
1021         if (status)
1022                 dev_err(&port->dev,
1023                         "%s - cannot set modem control on port %d, %d\n",
1024                                                 __func__, port_number, status);
1025
1026         kfree(config);
1027 }
1028
1029
1030 static int ti_tiocmget(struct tty_struct *tty, struct file *file)
1031 {
1032         struct usb_serial_port *port = tty->driver_data;
1033         struct ti_port *tport = usb_get_serial_port_data(port);
1034         unsigned int result;
1035         unsigned int msr;
1036         unsigned int mcr;
1037         unsigned long flags;
1038
1039         dbg("%s - port %d", __func__, port->number);
1040
1041         if (tport == NULL)
1042                 return -ENODEV;
1043
1044         spin_lock_irqsave(&tport->tp_lock, flags);
1045         msr = tport->tp_msr;
1046         mcr = tport->tp_shadow_mcr;
1047         spin_unlock_irqrestore(&tport->tp_lock, flags);
1048
1049         result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1050                 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1051                 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1052                 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1053                 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1054                 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1055                 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1056
1057         dbg("%s - 0x%04X", __func__, result);
1058
1059         return result;
1060 }
1061
1062
1063 static int ti_tiocmset(struct tty_struct *tty, struct file *file,
1064         unsigned int set, unsigned int clear)
1065 {
1066         struct usb_serial_port *port = tty->driver_data;
1067         struct ti_port *tport = usb_get_serial_port_data(port);
1068         unsigned int mcr;
1069         unsigned long flags;
1070
1071         dbg("%s - port %d", __func__, port->number);
1072
1073         if (tport == NULL)
1074                 return -ENODEV;
1075
1076         spin_lock_irqsave(&tport->tp_lock, flags);
1077         mcr = tport->tp_shadow_mcr;
1078
1079         if (set & TIOCM_RTS)
1080                 mcr |= TI_MCR_RTS;
1081         if (set & TIOCM_DTR)
1082                 mcr |= TI_MCR_DTR;
1083         if (set & TIOCM_LOOP)
1084                 mcr |= TI_MCR_LOOP;
1085
1086         if (clear & TIOCM_RTS)
1087                 mcr &= ~TI_MCR_RTS;
1088         if (clear & TIOCM_DTR)
1089                 mcr &= ~TI_MCR_DTR;
1090         if (clear & TIOCM_LOOP)
1091                 mcr &= ~TI_MCR_LOOP;
1092         spin_unlock_irqrestore(&tport->tp_lock, flags);
1093
1094         return ti_set_mcr(tport, mcr);
1095 }
1096
1097
1098 static void ti_break(struct tty_struct *tty, int break_state)
1099 {
1100         struct usb_serial_port *port = tty->driver_data;
1101         struct ti_port *tport = usb_get_serial_port_data(port);
1102         int status;
1103
1104         dbg("%s - state = %d", __func__, break_state);
1105
1106         if (tport == NULL)
1107                 return;
1108
1109         ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0);
1110
1111         status = ti_write_byte(tport->tp_tdev,
1112                 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1113                 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1114
1115         if (status)
1116                 dbg("%s - error setting break, %d", __func__, status);
1117 }
1118
1119
1120 static void ti_interrupt_callback(struct urb *urb)
1121 {
1122         struct ti_device *tdev = urb->context;
1123         struct usb_serial_port *port;
1124         struct usb_serial *serial = tdev->td_serial;
1125         struct ti_port *tport;
1126         struct device *dev = &urb->dev->dev;
1127         unsigned char *data = urb->transfer_buffer;
1128         int length = urb->actual_length;
1129         int port_number;
1130         int function;
1131         int status = urb->status;
1132         int retval;
1133         __u8 msr;
1134
1135         dbg("%s", __func__);
1136
1137         switch (status) {
1138         case 0:
1139                 break;
1140         case -ECONNRESET:
1141         case -ENOENT:
1142         case -ESHUTDOWN:
1143                 dbg("%s - urb shutting down, %d", __func__, status);
1144                 tdev->td_urb_error = 1;
1145                 return;
1146         default:
1147                 dev_err(dev, "%s - nonzero urb status, %d\n",
1148                         __func__, status);
1149                 tdev->td_urb_error = 1;
1150                 goto exit;
1151         }
1152
1153         if (length != 2) {
1154                 dbg("%s - bad packet size, %d", __func__, length);
1155                 goto exit;
1156         }
1157
1158         if (data[0] == TI_CODE_HARDWARE_ERROR) {
1159                 dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1160                 goto exit;
1161         }
1162
1163         port_number = TI_GET_PORT_FROM_CODE(data[0]);
1164         function = TI_GET_FUNC_FROM_CODE(data[0]);
1165
1166         dbg("%s - port_number %d, function %d, data 0x%02X",
1167                                 __func__, port_number, function, data[1]);
1168
1169         if (port_number >= serial->num_ports) {
1170                 dev_err(dev, "%s - bad port number, %d\n",
1171                                                 __func__, port_number);
1172                 goto exit;
1173         }
1174
1175         port = serial->port[port_number];
1176
1177         tport = usb_get_serial_port_data(port);
1178         if (!tport)
1179                 goto exit;
1180
1181         switch (function) {
1182         case TI_CODE_DATA_ERROR:
1183                 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1184                                         __func__, port_number, data[1]);
1185                 break;
1186
1187         case TI_CODE_MODEM_STATUS:
1188                 msr = data[1];
1189                 dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr);
1190                 ti_handle_new_msr(tport, msr);
1191                 break;
1192
1193         default:
1194                 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1195                                                         __func__, data[1]);
1196                 break;
1197         }
1198
1199 exit:
1200         retval = usb_submit_urb(urb, GFP_ATOMIC);
1201         if (retval)
1202                 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1203                         __func__, retval);
1204 }
1205
1206
1207 static void ti_bulk_in_callback(struct urb *urb)
1208 {
1209         struct ti_port *tport = urb->context;
1210         struct usb_serial_port *port = tport->tp_port;
1211         struct device *dev = &urb->dev->dev;
1212         int status = urb->status;
1213         int retval = 0;
1214         struct tty_struct *tty;
1215
1216         dbg("%s", __func__);
1217
1218         switch (status) {
1219         case 0:
1220                 break;
1221         case -ECONNRESET:
1222         case -ENOENT:
1223         case -ESHUTDOWN:
1224                 dbg("%s - urb shutting down, %d", __func__, status);
1225                 tport->tp_tdev->td_urb_error = 1;
1226                 wake_up_interruptible(&tport->tp_write_wait);
1227                 return;
1228         default:
1229                 dev_err(dev, "%s - nonzero urb status, %d\n",
1230                         __func__, status);
1231                 tport->tp_tdev->td_urb_error = 1;
1232                 wake_up_interruptible(&tport->tp_write_wait);
1233         }
1234
1235         if (status == -EPIPE)
1236                 goto exit;
1237
1238         if (status) {
1239                 dev_err(dev, "%s - stopping read!\n", __func__);
1240                 return;
1241         }
1242
1243         tty = tty_port_tty_get(&port->port);
1244         if (tty && urb->actual_length) {
1245                 usb_serial_debug_data(debug, dev, __func__,
1246                         urb->actual_length, urb->transfer_buffer);
1247
1248                 if (!tport->tp_is_open)
1249                         dbg("%s - port closed, dropping data", __func__);
1250                 else
1251                         ti_recv(&urb->dev->dev, tty,
1252                                                 urb->transfer_buffer,
1253                                                 urb->actual_length);
1254
1255                 spin_lock(&tport->tp_lock);
1256                 tport->tp_icount.rx += urb->actual_length;
1257                 spin_unlock(&tport->tp_lock);
1258                 tty_kref_put(tty);
1259         }
1260
1261 exit:
1262         /* continue to read unless stopping */
1263         spin_lock(&tport->tp_lock);
1264         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
1265                 urb->dev = port->serial->dev;
1266                 retval = usb_submit_urb(urb, GFP_ATOMIC);
1267         } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
1268                 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1269         }
1270         spin_unlock(&tport->tp_lock);
1271         if (retval)
1272                 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1273                         __func__, retval);
1274 }
1275
1276
1277 static void ti_bulk_out_callback(struct urb *urb)
1278 {
1279         struct ti_port *tport = urb->context;
1280         struct usb_serial_port *port = tport->tp_port;
1281         struct device *dev = &urb->dev->dev;
1282         int status = urb->status;
1283
1284         dbg("%s - port %d", __func__, port->number);
1285
1286         tport->tp_write_urb_in_use = 0;
1287
1288         switch (status) {
1289         case 0:
1290                 break;
1291         case -ECONNRESET:
1292         case -ENOENT:
1293         case -ESHUTDOWN:
1294                 dbg("%s - urb shutting down, %d", __func__, status);
1295                 tport->tp_tdev->td_urb_error = 1;
1296                 wake_up_interruptible(&tport->tp_write_wait);
1297                 return;
1298         default:
1299                 dev_err(dev, "%s - nonzero urb status, %d\n",
1300                         __func__, status);
1301                 tport->tp_tdev->td_urb_error = 1;
1302                 wake_up_interruptible(&tport->tp_write_wait);
1303         }
1304
1305         /* send any buffered data */
1306         ti_send(tport);
1307 }
1308
1309
1310 static void ti_recv(struct device *dev, struct tty_struct *tty,
1311         unsigned char *data, int length)
1312 {
1313         int cnt;
1314
1315         do {
1316                 cnt = tty_buffer_request_room(tty, length);
1317                 if (cnt < length) {
1318                         dev_err(dev, "%s - dropping data, %d bytes lost\n",
1319                                                 __func__, length - cnt);
1320                         if (cnt == 0)
1321                                 break;
1322                 }
1323                 tty_insert_flip_string(tty, data, cnt);
1324                 tty_flip_buffer_push(tty);
1325                 data += cnt;
1326                 length -= cnt;
1327         } while (length > 0);
1328
1329 }
1330
1331
1332 static void ti_send(struct ti_port *tport)
1333 {
1334         int count, result;
1335         struct usb_serial_port *port = tport->tp_port;
1336         struct tty_struct *tty = tty_port_tty_get(&port->port); /* FIXME */
1337         unsigned long flags;
1338
1339
1340         dbg("%s - port %d", __func__, port->number);
1341
1342         spin_lock_irqsave(&tport->tp_lock, flags);
1343
1344         if (tport->tp_write_urb_in_use)
1345                 goto unlock;
1346
1347         count = ti_buf_get(tport->tp_write_buf,
1348                                 port->write_urb->transfer_buffer,
1349                                 port->bulk_out_size);
1350
1351         if (count == 0)
1352                 goto unlock;
1353
1354         tport->tp_write_urb_in_use = 1;
1355
1356         spin_unlock_irqrestore(&tport->tp_lock, flags);
1357
1358         usb_serial_debug_data(debug, &port->dev, __func__, count,
1359                                         port->write_urb->transfer_buffer);
1360
1361         usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1362                            usb_sndbulkpipe(port->serial->dev,
1363                                             port->bulk_out_endpointAddress),
1364                            port->write_urb->transfer_buffer, count,
1365                            ti_bulk_out_callback, tport);
1366
1367         result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1368         if (result) {
1369                 dev_err(&port->dev, "%s - submit write urb failed, %d\n",
1370                                                         __func__, result);
1371                 tport->tp_write_urb_in_use = 0;
1372                 /* TODO: reschedule ti_send */
1373         } else {
1374                 spin_lock_irqsave(&tport->tp_lock, flags);
1375                 tport->tp_icount.tx += count;
1376                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1377         }
1378
1379         /* more room in the buffer for new writes, wakeup */
1380         if (tty)
1381                 tty_wakeup(tty);
1382         tty_kref_put(tty);
1383         wake_up_interruptible(&tport->tp_write_wait);
1384         return;
1385 unlock:
1386         spin_unlock_irqrestore(&tport->tp_lock, flags);
1387         tty_kref_put(tty);
1388         return;
1389 }
1390
1391
1392 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1393 {
1394         unsigned long flags;
1395         int status;
1396
1397         status = ti_write_byte(tport->tp_tdev,
1398                 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1399                 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1400
1401         spin_lock_irqsave(&tport->tp_lock, flags);
1402         if (!status)
1403                 tport->tp_shadow_mcr = mcr;
1404         spin_unlock_irqrestore(&tport->tp_lock, flags);
1405
1406         return status;
1407 }
1408
1409
1410 static int ti_get_lsr(struct ti_port *tport)
1411 {
1412         int size, status;
1413         struct ti_device *tdev = tport->tp_tdev;
1414         struct usb_serial_port *port = tport->tp_port;
1415         int port_number = port->number - port->serial->minor;
1416         struct ti_port_status *data;
1417
1418         dbg("%s - port %d", __func__, port->number);
1419
1420         size = sizeof(struct ti_port_status);
1421         data = kmalloc(size, GFP_KERNEL);
1422         if (!data) {
1423                 dev_err(&port->dev, "%s - out of memory\n", __func__);
1424                 return -ENOMEM;
1425         }
1426
1427         status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
1428                 (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
1429         if (status) {
1430                 dev_err(&port->dev,
1431                         "%s - get port status command failed, %d\n",
1432                                                         __func__, status);
1433                 goto free_data;
1434         }
1435
1436         dbg("%s - lsr 0x%02X", __func__, data->bLSR);
1437
1438         tport->tp_lsr = data->bLSR;
1439
1440 free_data:
1441         kfree(data);
1442         return status;
1443 }
1444
1445
1446 static int ti_get_serial_info(struct ti_port *tport,
1447         struct serial_struct __user *ret_arg)
1448 {
1449         struct usb_serial_port *port = tport->tp_port;
1450         struct serial_struct ret_serial;
1451
1452         if (!ret_arg)
1453                 return -EFAULT;
1454
1455         memset(&ret_serial, 0, sizeof(ret_serial));
1456
1457         ret_serial.type = PORT_16550A;
1458         ret_serial.line = port->serial->minor;
1459         ret_serial.port = port->number - port->serial->minor;
1460         ret_serial.flags = tport->tp_flags;
1461         ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
1462         ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1463         ret_serial.closing_wait = tport->tp_closing_wait;
1464
1465         if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
1466                 return -EFAULT;
1467
1468         return 0;
1469 }
1470
1471
1472 static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
1473         struct serial_struct __user *new_arg)
1474 {
1475         struct serial_struct new_serial;
1476
1477         if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
1478                 return -EFAULT;
1479
1480         tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
1481         tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1482         tport->tp_closing_wait = new_serial.closing_wait;
1483
1484         return 0;
1485 }
1486
1487
1488 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
1489 {
1490         struct async_icount *icount;
1491         struct tty_struct *tty;
1492         unsigned long flags;
1493
1494         dbg("%s - msr 0x%02X", __func__, msr);
1495
1496         if (msr & TI_MSR_DELTA_MASK) {
1497                 spin_lock_irqsave(&tport->tp_lock, flags);
1498                 icount = &tport->tp_icount;
1499                 if (msr & TI_MSR_DELTA_CTS)
1500                         icount->cts++;
1501                 if (msr & TI_MSR_DELTA_DSR)
1502                         icount->dsr++;
1503                 if (msr & TI_MSR_DELTA_CD)
1504                         icount->dcd++;
1505                 if (msr & TI_MSR_DELTA_RI)
1506                         icount->rng++;
1507                 wake_up_interruptible(&tport->tp_msr_wait);
1508                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1509         }
1510
1511         tport->tp_msr = msr & TI_MSR_MASK;
1512
1513         /* handle CTS flow control */
1514         tty = tty_port_tty_get(&tport->tp_port->port);
1515         if (tty && C_CRTSCTS(tty)) {
1516                 if (msr & TI_MSR_CTS) {
1517                         tty->hw_stopped = 0;
1518                         tty_wakeup(tty);
1519                 } else {
1520                         tty->hw_stopped = 1;
1521                 }
1522         }
1523         tty_kref_put(tty);
1524 }
1525
1526
1527 static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
1528 {
1529         struct ti_device *tdev = tport->tp_tdev;
1530         struct usb_serial_port *port = tport->tp_port;
1531         wait_queue_t wait;
1532
1533         dbg("%s - port %d", __func__, port->number);
1534
1535         spin_lock_irq(&tport->tp_lock);
1536
1537         /* wait for data to drain from the buffer */
1538         tdev->td_urb_error = 0;
1539         init_waitqueue_entry(&wait, current);
1540         add_wait_queue(&tport->tp_write_wait, &wait);
1541         for (;;) {
1542                 set_current_state(TASK_INTERRUPTIBLE);
1543                 if (ti_buf_data_avail(tport->tp_write_buf) == 0
1544                 || timeout == 0 || signal_pending(current)
1545                 || tdev->td_urb_error
1546                 || port->serial->disconnected)  /* disconnect */
1547                         break;
1548                 spin_unlock_irq(&tport->tp_lock);
1549                 timeout = schedule_timeout(timeout);
1550                 spin_lock_irq(&tport->tp_lock);
1551         }
1552         set_current_state(TASK_RUNNING);
1553         remove_wait_queue(&tport->tp_write_wait, &wait);
1554
1555         /* flush any remaining data in the buffer */
1556         if (flush)
1557                 ti_buf_clear(tport->tp_write_buf);
1558
1559         spin_unlock_irq(&tport->tp_lock);
1560
1561         mutex_lock(&port->serial->disc_mutex);
1562         /* wait for data to drain from the device */
1563         /* wait for empty tx register, plus 20 ms */
1564         timeout += jiffies;
1565         tport->tp_lsr &= ~TI_LSR_TX_EMPTY;
1566         while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
1567         && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error
1568         && !port->serial->disconnected) {
1569                 if (ti_get_lsr(tport))
1570                         break;
1571                 mutex_unlock(&port->serial->disc_mutex);
1572                 msleep_interruptible(20);
1573                 mutex_lock(&port->serial->disc_mutex);
1574         }
1575         mutex_unlock(&port->serial->disc_mutex);
1576 }
1577
1578
1579 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1580 {
1581         unsigned long flags;
1582
1583         spin_lock_irqsave(&tport->tp_lock, flags);
1584
1585         if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1586                 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1587
1588         spin_unlock_irqrestore(&tport->tp_lock, flags);
1589 }
1590
1591
1592 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1593 {
1594         struct urb *urb;
1595         int status = 0;
1596         unsigned long flags;
1597
1598         spin_lock_irqsave(&tport->tp_lock, flags);
1599
1600         if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1601                 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1602                 urb = tport->tp_port->read_urb;
1603                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1604                 urb->complete = ti_bulk_in_callback;
1605                 urb->context = tport;
1606                 urb->dev = tport->tp_port->serial->dev;
1607                 status = usb_submit_urb(urb, GFP_KERNEL);
1608         } else  {
1609                 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1610                 spin_unlock_irqrestore(&tport->tp_lock, flags);
1611         }
1612
1613         return status;
1614 }
1615
1616
1617 static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
1618         __u16 moduleid, __u16 value, __u8 *data, int size)
1619 {
1620         int status;
1621
1622         status = usb_control_msg(tdev->td_serial->dev,
1623                 usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
1624                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
1625                 value, moduleid, data, size, 1000);
1626
1627         if (status == size)
1628                 status = 0;
1629
1630         if (status > 0)
1631                 status = -ECOMM;
1632
1633         return status;
1634 }
1635
1636
1637 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
1638         __u16 moduleid, __u16 value, __u8 *data, int size)
1639 {
1640         int status;
1641
1642         status = usb_control_msg(tdev->td_serial->dev,
1643                 usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
1644                 (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
1645                 value, moduleid, data, size, 1000);
1646
1647         if (status == size)
1648                 status = 0;
1649
1650         if (status > 0)
1651                 status = -ECOMM;
1652
1653         return status;
1654 }
1655
1656
1657 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
1658         __u8 mask, __u8 byte)
1659 {
1660         int status;
1661         unsigned int size;
1662         struct ti_write_data_bytes *data;
1663         struct device *dev = &tdev->td_serial->dev->dev;
1664
1665         dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X",
1666                                         __func__, addr, mask, byte);
1667
1668         size = sizeof(struct ti_write_data_bytes) + 2;
1669         data = kmalloc(size, GFP_KERNEL);
1670         if (!data) {
1671                 dev_err(dev, "%s - out of memory\n", __func__);
1672                 return -ENOMEM;
1673         }
1674
1675         data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1676         data->bDataType = TI_RW_DATA_BYTE;
1677         data->bDataCounter = 1;
1678         data->wBaseAddrHi = cpu_to_be16(addr>>16);
1679         data->wBaseAddrLo = cpu_to_be16(addr);
1680         data->bData[0] = mask;
1681         data->bData[1] = byte;
1682
1683         status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
1684                 (__u8 *)data, size);
1685
1686         if (status < 0)
1687                 dev_err(dev, "%s - failed, %d\n", __func__, status);
1688
1689         kfree(data);
1690
1691         return status;
1692 }
1693
1694 static int ti_do_download(struct usb_device *dev, int pipe,
1695                                                 u8 *buffer, int size)
1696 {
1697         int pos;
1698         u8 cs = 0;
1699         int done;
1700         struct ti_firmware_header *header;
1701         int status;
1702         int len;
1703
1704         for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1705                 cs = (__u8)(cs + buffer[pos]);
1706
1707         header = (struct ti_firmware_header *)buffer;
1708         header->wLength = cpu_to_le16((__u16)(size
1709                                         - sizeof(struct ti_firmware_header)));
1710         header->bCheckSum = cs;
1711
1712         dbg("%s - downloading firmware", __func__);
1713         for (pos = 0; pos < size; pos += done) {
1714                 len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1715                 status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1716                                                                 &done, 1000);
1717                 if (status)
1718                         break;
1719         }
1720         return status;
1721 }
1722
1723 static int ti_download_firmware(struct ti_device *tdev, int type)
1724 {
1725         int status = -ENOMEM;
1726         int buffer_size;
1727         __u8 *buffer;
1728         struct usb_device *dev = tdev->td_serial->dev;
1729         unsigned int pipe = usb_sndbulkpipe(dev,
1730                 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1731         const struct firmware *fw_p;
1732         char buf[32];
1733         sprintf(buf, "ti_usb-%d.bin", type);
1734
1735         if (request_firmware(&fw_p, buf, &dev->dev)) {
1736                 dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1737                 return -ENOENT;
1738         }
1739         if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1740                 dev_err(&dev->dev, "%s - firmware too large\n", __func__);
1741                 return -ENOENT;
1742         }
1743
1744         buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1745         buffer = kmalloc(buffer_size, GFP_KERNEL);
1746         if (buffer) {
1747                 memcpy(buffer, fw_p->data, fw_p->size);
1748                 memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1749                 status = ti_do_download(dev, pipe, buffer, fw_p->size);
1750                 kfree(buffer);
1751         }
1752         release_firmware(fw_p);
1753         if (status) {
1754                 dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1755                                                         __func__, status);
1756                 return status;
1757         }
1758
1759         dbg("%s - download successful", __func__);
1760
1761         return 0;
1762 }
1763
1764
1765 /* Circular Buffer Functions */
1766
1767 /*
1768  * ti_buf_alloc
1769  *
1770  * Allocate a circular buffer and all associated memory.
1771  */
1772
1773 static struct circ_buf *ti_buf_alloc(void)
1774 {
1775         struct circ_buf *cb;
1776
1777         cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
1778         if (cb == NULL)
1779                 return NULL;
1780
1781         cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL);
1782         if (cb->buf == NULL) {
1783                 kfree(cb);
1784                 return NULL;
1785         }
1786
1787         ti_buf_clear(cb);
1788
1789         return cb;
1790 }
1791
1792
1793 /*
1794  * ti_buf_free
1795  *
1796  * Free the buffer and all associated memory.
1797  */
1798
1799 static void ti_buf_free(struct circ_buf *cb)
1800 {
1801         kfree(cb->buf);
1802         kfree(cb);
1803 }
1804
1805
1806 /*
1807  * ti_buf_clear
1808  *
1809  * Clear out all data in the circular buffer.
1810  */
1811
1812 static void ti_buf_clear(struct circ_buf *cb)
1813 {
1814         cb->head = cb->tail = 0;
1815 }
1816
1817
1818 /*
1819  * ti_buf_data_avail
1820  *
1821  * Return the number of bytes of data available in the circular
1822  * buffer.
1823  */
1824
1825 static int ti_buf_data_avail(struct circ_buf *cb)
1826 {
1827         return CIRC_CNT(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1828 }
1829
1830
1831 /*
1832  * ti_buf_space_avail
1833  *
1834  * Return the number of bytes of space available in the circular
1835  * buffer.
1836  */
1837
1838 static int ti_buf_space_avail(struct circ_buf *cb)
1839 {
1840         return CIRC_SPACE(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1841 }
1842
1843
1844 /*
1845  * ti_buf_put
1846  *
1847  * Copy data data from a user buffer and put it into the circular buffer.
1848  * Restrict to the amount of space available.
1849  *
1850  * Return the number of bytes copied.
1851  */
1852
1853 static int ti_buf_put(struct circ_buf *cb, const char *buf, int count)
1854 {
1855         int c, ret = 0;
1856
1857         while (1) {
1858                 c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1859                 if (count < c)
1860                         c = count;
1861                 if (c <= 0)
1862                         break;
1863                 memcpy(cb->buf + cb->head, buf, c);
1864                 cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1);
1865                 buf += c;
1866                 count -= c;
1867                 ret += c;
1868         }
1869
1870         return ret;
1871 }
1872
1873
1874 /*
1875  * ti_buf_get
1876  *
1877  * Get data from the circular buffer and copy to the given buffer.
1878  * Restrict to the amount of data available.
1879  *
1880  * Return the number of bytes copied.
1881  */
1882
1883 static int ti_buf_get(struct circ_buf *cb, char *buf, int count)
1884 {
1885         int c, ret = 0;
1886
1887         while (1) {
1888                 c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
1889                 if (count < c)
1890                         c = count;
1891                 if (c <= 0)
1892                         break;
1893                 memcpy(buf, cb->buf + cb->tail, c);
1894                 cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1);
1895                 buf += c;
1896                 count -= c;
1897                 ret += c;
1898         }
1899
1900         return ret;
1901 }