powerpc: Move is_32bit_task

[linux-2.6] / Documentation / filesystems / ext4.txt

Ext4 Filesystem
===============

Ext4 is an an advanced level of the ext3 filesystem which incorporates
scalability and reliability enhancements for supporting large filesystems
(64 bit) in keeping with increasing disk capacities and state-of-the-art
feature requirements.

Mailing list:   linux-ext4@vger.kernel.org
Web site:       http://ext4.wiki.kernel.org


1. Quick usage instructions:
===========================

Note: More extensive information for getting started with ext4 can be
      found at the ext4 wiki site at the URL:
      http://ext4.wiki.kernel.org/index.php/Ext4_Howto

  - Compile and install the latest version of e2fsprogs (as of this
    writing version 1.41.3) from:

    http://sourceforge.net/project/showfiles.php?group_id=2406
        
        or

    ftp://ftp.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/

        or grab the latest git repository from:

    git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git

  - Note that it is highly important to install the mke2fs.conf file
    that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
    you have edited the /etc/mke2fs.conf file installed on your system,
    you will need to merge your changes with the version from e2fsprogs
    1.41.x.

  - Create a new filesystem using the ext4 filesystem type:

        # mke2fs -t ext4 /dev/hda1

    Or to configure an existing ext3 filesystem to support extents: 

        # tune2fs -O extents /dev/hda1

    If the filesystem was created with 128 byte inodes, it can be
    converted to use 256 byte for greater efficiency via:

        # tune2fs -I 256 /dev/hda1

    (Note: we currently do not have tools to convert an ext4
    filesystem back to ext3; so please do not do try this on production
    filesystems.)

  - Mounting:

        # mount -t ext4 /dev/hda1 /wherever

  - When comparing performance with other filesystems, it's always
    important to try multiple workloads; very often a subtle change in a
    workload parameter can completely change the ranking of which
    filesystems do well compared to others.  When comparing versus ext3,
    note that ext4 enables write barriers by default, while ext3 does
    not enable write barriers by default.  So it is useful to use
    explicitly specify whether barriers are enabled or not when via the
    '-o barriers=[0|1]' mount option for both ext3 and ext4 filesystems
    for a fair comparison.  When tuning ext3 for best benchmark numbers,
    it is often worthwhile to try changing the data journaling mode; '-o
    data=writeback,nobh' can be faster for some workloads.  (Note
    however that running mounted with data=writeback can potentially
    leave stale data exposed in recently written files in case of an
    unclean shutdown, which could be a security exposure in some
    situations.)  Configuring the filesystem with a large journal can
    also be helpful for metadata-intensive workloads.

2. Features
===========

2.1 Currently available

* ability to use filesystems > 16TB (e2fsprogs support not available yet)
* extent format reduces metadata overhead (RAM, IO for access, transactions)
* extent format more robust in face of on-disk corruption due to magics,
* internal redundancy in tree
* improved file allocation (multi-block alloc)
* fix 32000 subdirectory limit
* nsec timestamps for mtime, atime, ctime, create time
* inode version field on disk (NFSv4, Lustre)
* reduced e2fsck time via uninit_bg feature
* journal checksumming for robustness, performance
* persistent file preallocation (e.g for streaming media, databases)
* ability to pack bitmaps and inode tables into larger virtual groups via the
  flex_bg feature
* large file support
* Inode allocation using large virtual block groups via flex_bg
* delayed allocation
* large block (up to pagesize) support
* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force
  the ordering)

2.2 Candidate features for future inclusion

* Online defrag (patches available but not well tested)
* reduced mke2fs time via lazy itable initialization in conjuction with
  the uninit_bg feature (capability to do this is available in e2fsprogs
  but a kernel thread to do lazy zeroing of unused inode table blocks
  after filesystem is first mounted is required for safety)

There are several others under discussion, whether they all make it in is
partly a function of how much time everyone has to work on them. Features like
metadata checksumming have been discussed and planned for a bit but no patches
exist yet so I'm not sure they're in the near-term roadmap.

The big performance win will come with mballoc, delalloc and flex_bg
grouping of bitmaps and inode tables.  Some test results available here:

 - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-write-2.6.27-rc1.html
 - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-readwrite-2.6.27-rc1.html

3. Options
==========

When mounting an ext4 filesystem, the following option are accepted:
(*) == default

ro                      Mount filesystem read only. Note that ext4 will
                        replay the journal (and thus write to the
                        partition) even when mounted "read only". The
                        mount options "ro,noload" can be used to prevent
                        writes to the filesystem.

journal_checksum        Enable checksumming of the journal transactions.
                        This will allow the recovery code in e2fsck and the
                        kernel to detect corruption in the kernel.  It is a
                        compatible change and will be ignored by older kernels.

journal_async_commit    Commit block can be written to disk without waiting
                        for descriptor blocks. If enabled older kernels cannot
                        mount the device. This will enable 'journal_checksum'
                        internally.

journal=update          Update the ext4 file system's journal to the current
                        format.

journal_dev=devnum      When the external journal device's major/minor numbers
                        have changed, this option allows the user to specify
                        the new journal location.  The journal device is
                        identified through its new major/minor numbers encoded
                        in devnum.

noload                  Don't load the journal on mounting.  Note that
                        if the filesystem was not unmounted cleanly,
                        skipping the journal replay will lead to the
                        filesystem containing inconsistencies that can
                        lead to any number of problems.

data=journal            All data are committed into the journal prior to being
                        written into the main file system.

data=ordered    (*)     All data are forced directly out to the main file
                        system prior to its metadata being committed to the
                        journal.

data=writeback          Data ordering is not preserved, data may be written
                        into the main file system after its metadata has been
                        committed to the journal.

commit=nrsec    (*)     Ext4 can be told to sync all its data and metadata
                        every 'nrsec' seconds. The default value is 5 seconds.
                        This means that if you lose your power, you will lose
                        as much as the latest 5 seconds of work (your
                        filesystem will not be damaged though, thanks to the
                        journaling).  This default value (or any low value)
                        will hurt performance, but it's good for data-safety.
                        Setting it to 0 will have the same effect as leaving
                        it at the default (5 seconds).
                        Setting it to very large values will improve
                        performance.

barrier=<0|1(*)>        This enables/disables the use of write barriers in
                        the jbd code.  barrier=0 disables, barrier=1 enables.
                        This also requires an IO stack which can support
                        barriers, and if jbd gets an error on a barrier
                        write, it will disable again with a warning.
                        Write barriers enforce proper on-disk ordering
                        of journal commits, making volatile disk write caches
                        safe to use, at some performance penalty.  If
                        your disks are battery-backed in one way or another,
                        disabling barriers may safely improve performance.

inode_readahead=n       This tuning parameter controls the maximum
                        number of inode table blocks that ext4's inode
                        table readahead algorithm will pre-read into
                        the buffer cache.  The default value is 32 blocks.

orlov           (*)     This enables the new Orlov block allocator. It is
                        enabled by default.

oldalloc                This disables the Orlov block allocator and enables
                        the old block allocator.  Orlov should have better
                        performance - we'd like to get some feedback if it's
                        the contrary for you.

user_xattr              Enables Extended User Attributes.  Additionally, you
                        need to have extended attribute support enabled in the
                        kernel configuration (CONFIG_EXT4_FS_XATTR).  See the
                        attr(5) manual page and http://acl.bestbits.at/ to
                        learn more about extended attributes.

nouser_xattr            Disables Extended User Attributes.

acl                     Enables POSIX Access Control Lists support.
                        Additionally, you need to have ACL support enabled in
                        the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL).
                        See the acl(5) manual page and http://acl.bestbits.at/
                        for more information.

noacl                   This option disables POSIX Access Control List
                        support.

reservation

noreservation

bsddf           (*)     Make 'df' act like BSD.
minixdf                 Make 'df' act like Minix.

debug                   Extra debugging information is sent to syslog.

errors=remount-ro       Remount the filesystem read-only on an error.
errors=continue         Keep going on a filesystem error.
errors=panic            Panic and halt the machine if an error occurs.
                        (These mount options override the errors behavior
                        specified in the superblock, which can be configured
                        using tune2fs)

data_err=ignore(*)      Just print an error message if an error occurs
                        in a file data buffer in ordered mode.
data_err=abort          Abort the journal if an error occurs in a file
                        data buffer in ordered mode.

grpid                   Give objects the same group ID as their creator.
bsdgroups

nogrpid         (*)     New objects have the group ID of their creator.
sysvgroups

resgid=n                The group ID which may use the reserved blocks.

resuid=n                The user ID which may use the reserved blocks.

sb=n                    Use alternate superblock at this location.

quota
noquota
grpquota
usrquota

bh              (*)     ext4 associates buffer heads to data pages to
nobh                    (a) cache disk block mapping information
                        (b) link pages into transaction to provide
                            ordering guarantees.
                        "bh" option forces use of buffer heads.
                        "nobh" option tries to avoid associating buffer
                        heads (supported only for "writeback" mode).

stripe=n                Number of filesystem blocks that mballoc will try
                        to use for allocation size and alignment. For RAID5/6
                        systems this should be the number of data
                        disks *  RAID chunk size in file system blocks.
delalloc        (*)     Deferring block allocation until write-out time.
nodelalloc              Disable delayed allocation. Blocks are allocation
                        when data is copied from user to page cache.

max_batch_time=usec     Maximum amount of time ext4 should wait for
                        additional filesystem operations to be batch
                        together with a synchronous write operation.
                        Since a synchronous write operation is going to
                        force a commit and then a wait for the I/O
                        complete, it doesn't cost much, and can be a
                        huge throughput win, we wait for a small amount
                        of time to see if any other transactions can
                        piggyback on the synchronous write.   The
                        algorithm used is designed to automatically tune
                        for the speed of the disk, by measuring the
                        amount of time (on average) that it takes to
                        finish committing a transaction.  Call this time
                        the "commit time".  If the time that the
                        transactoin has been running is less than the
                        commit time, ext4 will try sleeping for the
                        commit time to see if other operations will join
                        the transaction.   The commit time is capped by
                        the max_batch_time, which defaults to 15000us
                        (15ms).   This optimization can be turned off
                        entirely by setting max_batch_time to 0.

min_batch_time=usec     This parameter sets the commit time (as
                        described above) to be at least min_batch_time.
                        It defaults to zero microseconds.  Increasing
                        this parameter may improve the throughput of
                        multi-threaded, synchronous workloads on very
                        fast disks, at the cost of increasing latency.

journal_ioprio=prio     The I/O priority (from 0 to 7, where 0 is the
                        highest priorty) which should be used for I/O
                        operations submitted by kjournald2 during a
                        commit operation.  This defaults to 3, which is
                        a slightly higher priority than the default I/O
                        priority.

Data Mode
=========
There are 3 different data modes:

* writeback mode
In data=writeback mode, ext4 does not journal data at all.  This mode provides
a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
mode - metadata journaling.  A crash+recovery can cause incorrect data to
appear in files which were written shortly before the crash.  This mode will
typically provide the best ext4 performance.

* ordered mode
In data=ordered mode, ext4 only officially journals metadata, but it logically
groups metadata information related to data changes with the data blocks into a
single unit called a transaction.  When it's time to write the new metadata
out to disk, the associated data blocks are written first.  In general,
this mode performs slightly slower than writeback but significantly faster than journal mode.

* journal mode
data=journal mode provides full data and metadata journaling.  All new data is
written to the journal first, and then to its final location.
In the event of a crash, the journal can be replayed, bringing both data and
metadata into a consistent state.  This mode is the slowest except when data
needs to be read from and written to disk at the same time where it
outperforms all others modes.  Curently ext4 does not have delayed
allocation support if this data journalling mode is selected.

References
==========

kernel source:  <file:fs/ext4/>
                <file:fs/jbd2/>

programs:       http://e2fsprogs.sourceforge.net/

useful links:   http://fedoraproject.org/wiki/ext3-devel
                http://www.bullopensource.org/ext4/
                http://ext4.wiki.kernel.org/index.php/Main_Page
                http://fedoraproject.org/wiki/Features/Ext4