git.oblomov.eu Git - linux-2.6/blob - drivers/mmc/host/pxamci.c

   1 /*
   2  *  linux/drivers/mmc/host/pxa.c - PXA MMCI driver
   3  *
   4  *  Copyright (C) 2003 Russell King, All Rights Reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  *  This hardware is really sick:
  11  *   - No way to clear interrupts.
  12  *   - Have to turn off the clock whenever we touch the device.
  13  *   - Doesn't tell you how many data blocks were transferred.
  14  *  Yuck!
  15  *
  16  *      1 and 3 byte data transfers not supported
  17  *      max block length up to 1023
  18  */
  19 #include <linux/module.h>
  20 #include <linux/init.h>
  21 #include <linux/ioport.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/delay.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/dma-mapping.h>
  26 #include <linux/clk.h>
  27 #include <linux/err.h>
  28 #include <linux/mmc/host.h>
  29
  30 #include <asm/dma.h>
  31 #include <asm/io.h>
  32 #include <asm/sizes.h>
  33
  34 #include <asm/arch/pxa-regs.h>
  35 #include <asm/arch/mmc.h>
  36
  37 #include "pxamci.h"
  38
  39 #define DRIVER_NAME     "pxa2xx-mci"
  40
  41 #define NR_SG   1
  42 #define CLKRT_OFF       (~0)
  43
  44 struct pxamci_host {
  45         struct mmc_host         *mmc;
  46         spinlock_t              lock;
  47         struct resource         *res;
  48         void __iomem            *base;
  49         struct clk              *clk;
  50         unsigned long           clkrate;
  51         int                     irq;
  52         int                     dma;
  53         unsigned int            clkrt;
  54         unsigned int            cmdat;
  55         unsigned int            imask;
  56         unsigned int            power_mode;
  57         struct pxamci_platform_data *pdata;
  58
  59         struct mmc_request      *mrq;
  60         struct mmc_command      *cmd;
  61         struct mmc_data         *data;
  62
  63         dma_addr_t              sg_dma;
  64         struct pxa_dma_desc     *sg_cpu;
  65         unsigned int            dma_len;
  66
  67         unsigned int            dma_dir;
  68         unsigned int            dma_drcmrrx;
  69         unsigned int            dma_drcmrtx;
  70 };
  71
  72 static void pxamci_stop_clock(struct pxamci_host *host)
  73 {
  74         if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
  75                 unsigned long timeout = 10000;
  76                 unsigned int v;
  77
  78                 writel(STOP_CLOCK, host->base + MMC_STRPCL);
  79
  80                 do {
  81                         v = readl(host->base + MMC_STAT);
  82                         if (!(v & STAT_CLK_EN))
  83                                 break;
  84                         udelay(1);
  85                 } while (timeout--);
  86
  87                 if (v & STAT_CLK_EN)
  88                         dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
  89         }
  90 }
  91
  92 static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
  93 {
  94         unsigned long flags;
  95
  96         spin_lock_irqsave(&host->lock, flags);
  97         host->imask &= ~mask;
  98         writel(host->imask, host->base + MMC_I_MASK);
  99         spin_unlock_irqrestore(&host->lock, flags);
 100 }
 101
 102 static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
 103 {
 104         unsigned long flags;
 105
 106         spin_lock_irqsave(&host->lock, flags);
 107         host->imask |= mask;
 108         writel(host->imask, host->base + MMC_I_MASK);
 109         spin_unlock_irqrestore(&host->lock, flags);
 110 }
 111
 112 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 113 {
 114         unsigned int nob = data->blocks;
 115         unsigned long long clks;
 116         unsigned int timeout;
 117         u32 dcmd;
 118         int i;
 119
 120         host->data = data;
 121
 122         if (data->flags & MMC_DATA_STREAM)
 123                 nob = 0xffff;
 124
 125         writel(nob, host->base + MMC_NOB);
 126         writel(data->blksz, host->base + MMC_BLKLEN);
 127
 128         clks = (unsigned long long)data->timeout_ns * host->clkrate;
 129         do_div(clks, 1000000000UL);
 130         timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
 131         writel((timeout + 255) / 256, host->base + MMC_RDTO);
 132
 133         if (data->flags & MMC_DATA_READ) {
 134                 host->dma_dir = DMA_FROM_DEVICE;
 135                 dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
 136                 DRCMR(host->dma_drcmrtx) = 0;
 137                 DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
 138         } else {
 139                 host->dma_dir = DMA_TO_DEVICE;
 140                 dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
 141                 DRCMR(host->dma_drcmrrx) = 0;
 142                 DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
 143         }
 144
 145         dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
 146
 147         host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
 148                                    host->dma_dir);
 149
 150         for (i = 0; i < host->dma_len; i++) {
 151                 unsigned int length = sg_dma_len(&data->sg[i]);
 152                 host->sg_cpu[i].dcmd = dcmd | length;
 153                 if (length & 31 && !(data->flags & MMC_DATA_READ))
 154                         host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
 155                 if (data->flags & MMC_DATA_READ) {
 156                         host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
 157                         host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
 158                 } else {
 159                         host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
 160                         host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
 161                 }
 162                 host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
 163                                         sizeof(struct pxa_dma_desc);
 164         }
 165         host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
 166         wmb();
 167
 168         DDADR(host->dma) = host->sg_dma;
 169         DCSR(host->dma) = DCSR_RUN;
 170 }
 171
 172 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
 173 {
 174         WARN_ON(host->cmd != NULL);
 175         host->cmd = cmd;
 176
 177         if (cmd->flags & MMC_RSP_BUSY)
 178                 cmdat |= CMDAT_BUSY;
 179
 180 #define RSP_TYPE(x)     ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
 181         switch (RSP_TYPE(mmc_resp_type(cmd))) {
 182         case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
 183                 cmdat |= CMDAT_RESP_SHORT;
 184                 break;
 185         case RSP_TYPE(MMC_RSP_R3):
 186                 cmdat |= CMDAT_RESP_R3;
 187                 break;
 188         case RSP_TYPE(MMC_RSP_R2):
 189                 cmdat |= CMDAT_RESP_R2;
 190                 break;
 191         default:
 192                 break;
 193         }
 194
 195         writel(cmd->opcode, host->base + MMC_CMD);
 196         writel(cmd->arg >> 16, host->base + MMC_ARGH);
 197         writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
 198         writel(cmdat, host->base + MMC_CMDAT);
 199         writel(host->clkrt, host->base + MMC_CLKRT);
 200
 201         writel(START_CLOCK, host->base + MMC_STRPCL);
 202
 203         pxamci_enable_irq(host, END_CMD_RES);
 204 }
 205
 206 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
 207 {
 208         host->mrq = NULL;
 209         host->cmd = NULL;
 210         host->data = NULL;
 211         mmc_request_done(host->mmc, mrq);
 212 }
 213
 214 static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
 215 {
 216         struct mmc_command *cmd = host->cmd;
 217         int i;
 218         u32 v;
 219
 220         if (!cmd)
 221                 return 0;
 222
 223         host->cmd = NULL;
 224
 225         /*
 226          * Did I mention this is Sick.  We always need to
 227          * discard the upper 8 bits of the first 16-bit word.
 228          */
 229         v = readl(host->base + MMC_RES) & 0xffff;
 230         for (i = 0; i < 4; i++) {
 231                 u32 w1 = readl(host->base + MMC_RES) & 0xffff;
 232                 u32 w2 = readl(host->base + MMC_RES) & 0xffff;
 233                 cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
 234                 v = w2;
 235         }
 236
 237         if (stat & STAT_TIME_OUT_RESPONSE) {
 238                 cmd->error = -ETIMEDOUT;
 239         } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
 240 #ifdef CONFIG_PXA27x
 241                 /*
 242                  * workaround for erratum #42:
 243                  * Intel PXA27x Family Processor Specification Update Rev 001
 244                  * A bogus CRC error can appear if the msb of a 136 bit
 245                  * response is a one.
 246                  */
 247                 if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
 248                         pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
 249                 } else
 250 #endif
 251                 cmd->error = -EILSEQ;
 252         }
 253
 254         pxamci_disable_irq(host, END_CMD_RES);
 255         if (host->data && !cmd->error) {
 256                 pxamci_enable_irq(host, DATA_TRAN_DONE);
 257         } else {
 258                 pxamci_finish_request(host, host->mrq);
 259         }
 260
 261         return 1;
 262 }
 263
 264 static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
 265 {
 266         struct mmc_data *data = host->data;
 267
 268         if (!data)
 269                 return 0;
 270
 271         DCSR(host->dma) = 0;
 272         dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
 273                      host->dma_dir);
 274
 275         if (stat & STAT_READ_TIME_OUT)
 276                 data->error = -ETIMEDOUT;
 277         else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
 278                 data->error = -EILSEQ;
 279
 280         /*
 281          * There appears to be a hardware design bug here.  There seems to
 282          * be no way to find out how much data was transferred to the card.
 283          * This means that if there was an error on any block, we mark all
 284          * data blocks as being in error.
 285          */
 286         if (!data->error)
 287                 data->bytes_xfered = data->blocks * data->blksz;
 288         else
 289                 data->bytes_xfered = 0;
 290
 291         pxamci_disable_irq(host, DATA_TRAN_DONE);
 292
 293         host->data = NULL;
 294         if (host->mrq->stop) {
 295                 pxamci_stop_clock(host);
 296                 pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
 297         } else {
 298                 pxamci_finish_request(host, host->mrq);
 299         }
 300
 301         return 1;
 302 }
 303
 304 static irqreturn_t pxamci_irq(int irq, void *devid)
 305 {
 306         struct pxamci_host *host = devid;
 307         unsigned int ireg;
 308         int handled = 0;
 309
 310         ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
 311
 312         if (ireg) {
 313                 unsigned stat = readl(host->base + MMC_STAT);
 314
 315                 pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
 316
 317                 if (ireg & END_CMD_RES)
 318                         handled |= pxamci_cmd_done(host, stat);
 319                 if (ireg & DATA_TRAN_DONE)
 320                         handled |= pxamci_data_done(host, stat);
 321                 if (ireg & SDIO_INT) {
 322                         mmc_signal_sdio_irq(host->mmc);
 323                         handled = 1;
 324                 }
 325         }
 326
 327         return IRQ_RETVAL(handled);
 328 }
 329
 330 static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 331 {
 332         struct pxamci_host *host = mmc_priv(mmc);
 333         unsigned int cmdat;
 334
 335         WARN_ON(host->mrq != NULL);
 336
 337         host->mrq = mrq;
 338
 339         pxamci_stop_clock(host);
 340
 341         cmdat = host->cmdat;
 342         host->cmdat &= ~CMDAT_INIT;
 343
 344         if (mrq->data) {
 345                 pxamci_setup_data(host, mrq->data);
 346
 347                 cmdat &= ~CMDAT_BUSY;
 348                 cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
 349                 if (mrq->data->flags & MMC_DATA_WRITE)
 350                         cmdat |= CMDAT_WRITE;
 351
 352                 if (mrq->data->flags & MMC_DATA_STREAM)
 353                         cmdat |= CMDAT_STREAM;
 354         }
 355
 356         pxamci_start_cmd(host, mrq->cmd, cmdat);
 357 }
 358
 359 static int pxamci_get_ro(struct mmc_host *mmc)
 360 {
 361         struct pxamci_host *host = mmc_priv(mmc);
 362
 363         if (host->pdata && host->pdata->get_ro)
 364                 return host->pdata->get_ro(mmc_dev(mmc));
 365         /* Host doesn't support read only detection so assume writeable */
 366         return 0;
 367 }
 368
 369 static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 370 {
 371         struct pxamci_host *host = mmc_priv(mmc);
 372
 373         if (ios->clock) {
 374                 unsigned long rate = host->clkrate;
 375                 unsigned int clk = rate / ios->clock;
 376
 377                 if (host->clkrt == CLKRT_OFF)
 378                         clk_enable(host->clk);
 379
 380                 if (ios->clock == 26000000) {
 381                         /* to support 26MHz on pxa300/pxa310 */
 382                         host->clkrt = 7;
 383                 } else {
 384                         /* to handle (19.5MHz, 26MHz) */
 385                         if (!clk)
 386                                 clk = 1;
 387
 388                         /*
 389                          * clk might result in a lower divisor than we
 390                          * desire.  check for that condition and adjust
 391                          * as appropriate.
 392                          */
 393                         if (rate / clk > ios->clock)
 394                                 clk <<= 1;
 395                         host->clkrt = fls(clk) - 1;
 396                 }
 397
 398                 /*
 399                  * we write clkrt on the next command
 400                  */
 401         } else {
 402                 pxamci_stop_clock(host);
 403                 if (host->clkrt != CLKRT_OFF) {
 404                         host->clkrt = CLKRT_OFF;
 405                         clk_disable(host->clk);
 406                 }
 407         }
 408
 409         if (host->power_mode != ios->power_mode) {
 410                 host->power_mode = ios->power_mode;
 411
 412                 if (host->pdata && host->pdata->setpower)
 413                         host->pdata->setpower(mmc_dev(mmc), ios->vdd);
 414
 415                 if (ios->power_mode == MMC_POWER_ON)
 416                         host->cmdat |= CMDAT_INIT;
 417         }
 418
 419         if (ios->bus_width == MMC_BUS_WIDTH_4)
 420                 host->cmdat |= CMDAT_SD_4DAT;
 421         else
 422                 host->cmdat &= ~CMDAT_SD_4DAT;
 423
 424         pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
 425                  host->clkrt, host->cmdat);
 426 }
 427
 428 static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
 429 {
 430         struct pxamci_host *pxa_host = mmc_priv(host);
 431
 432         if (enable)
 433                 pxamci_enable_irq(pxa_host, SDIO_INT);
 434         else
 435                 pxamci_disable_irq(pxa_host, SDIO_INT);
 436 }
 437
 438 static const struct mmc_host_ops pxamci_ops = {
 439         .request                = pxamci_request,
 440         .get_ro                 = pxamci_get_ro,
 441         .set_ios                = pxamci_set_ios,
 442         .enable_sdio_irq        = pxamci_enable_sdio_irq,
 443 };
 444
 445 static void pxamci_dma_irq(int dma, void *devid)
 446 {
 447         struct pxamci_host *host = devid;
 448         int dcsr = DCSR(dma);
 449         DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
 450
 451         if (dcsr & DCSR_ENDINTR) {
 452                 writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
 453         } else {
 454                 printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
 455                        mmc_hostname(host->mmc), dma, dcsr);
 456                 host->data->error = -EIO;
 457                 pxamci_data_done(host, 0);
 458         }
 459 }
 460
 461 static irqreturn_t pxamci_detect_irq(int irq, void *devid)
 462 {
 463         struct pxamci_host *host = mmc_priv(devid);
 464
 465         mmc_detect_change(devid, host->pdata->detect_delay);
 466         return IRQ_HANDLED;
 467 }
 468
 469 static int pxamci_probe(struct platform_device *pdev)
 470 {
 471         struct mmc_host *mmc;
 472         struct pxamci_host *host = NULL;
 473         struct resource *r, *dmarx, *dmatx;
 474         int ret, irq;
 475
 476         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 477         irq = platform_get_irq(pdev, 0);
 478         if (!r || irq < 0)
 479                 return -ENXIO;
 480
 481         r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
 482         if (!r)
 483                 return -EBUSY;
 484
 485         mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
 486         if (!mmc) {
 487                 ret = -ENOMEM;
 488                 goto out;
 489         }
 490
 491         mmc->ops = &pxamci_ops;
 492
 493         /*
 494          * We can do SG-DMA, but we don't because we never know how much
 495          * data we successfully wrote to the card.
 496          */
 497         mmc->max_phys_segs = NR_SG;
 498
 499         /*
 500          * Our hardware DMA can handle a maximum of one page per SG entry.
 501          */
 502         mmc->max_seg_size = PAGE_SIZE;
 503
 504         /*
 505          * Block length register is only 10 bits before PXA27x.
 506          */
 507         mmc->max_blk_size = (cpu_is_pxa21x() || cpu_is_pxa25x()) ? 1023 : 2048;
 508
 509         /*
 510          * Block count register is 16 bits.
 511          */
 512         mmc->max_blk_count = 65535;
 513
 514         host = mmc_priv(mmc);
 515         host->mmc = mmc;
 516         host->dma = -1;
 517         host->pdata = pdev->dev.platform_data;
 518         host->clkrt = CLKRT_OFF;
 519
 520         host->clk = clk_get(&pdev->dev, "MMCCLK");
 521         if (IS_ERR(host->clk)) {
 522                 ret = PTR_ERR(host->clk);
 523                 host->clk = NULL;
 524                 goto out;
 525         }
 526
 527         host->clkrate = clk_get_rate(host->clk);
 528
 529         /*
 530          * Calculate minimum clock rate, rounding up.
 531          */
 532         mmc->f_min = (host->clkrate + 63) / 64;
 533         mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
 534                                                           : host->clkrate;
 535
 536         mmc->ocr_avail = host->pdata ?
 537                          host->pdata->ocr_mask :
 538                          MMC_VDD_32_33|MMC_VDD_33_34;
 539         mmc->caps = 0;
 540         host->cmdat = 0;
 541         if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
 542                 mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 543                 host->cmdat |= CMDAT_SDIO_INT_EN;
 544                 if (cpu_is_pxa300() || cpu_is_pxa310())
 545                         mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
 546                                      MMC_CAP_SD_HIGHSPEED;
 547         }
 548
 549         host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
 550         if (!host->sg_cpu) {
 551                 ret = -ENOMEM;
 552                 goto out;
 553         }
 554
 555         spin_lock_init(&host->lock);
 556         host->res = r;
 557         host->irq = irq;
 558         host->imask = MMC_I_MASK_ALL;
 559
 560         host->base = ioremap(r->start, SZ_4K);
 561         if (!host->base) {
 562                 ret = -ENOMEM;
 563                 goto out;
 564         }
 565
 566         /*
 567          * Ensure that the host controller is shut down, and setup
 568          * with our defaults.
 569          */
 570         pxamci_stop_clock(host);
 571         writel(0, host->base + MMC_SPI);
 572         writel(64, host->base + MMC_RESTO);
 573         writel(host->imask, host->base + MMC_I_MASK);
 574
 575         host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
 576                                     pxamci_dma_irq, host);
 577         if (host->dma < 0) {
 578                 ret = -EBUSY;
 579                 goto out;
 580         }
 581
 582         ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
 583         if (ret)
 584                 goto out;
 585
 586         platform_set_drvdata(pdev, mmc);
 587
 588         dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
 589         if (!dmarx) {
 590                 ret = -ENXIO;
 591                 goto out;
 592         }
 593         host->dma_drcmrrx = dmarx->start;
 594
 595         dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 596         if (!dmatx) {
 597                 ret = -ENXIO;
 598                 goto out;
 599         }
 600         host->dma_drcmrtx = dmatx->start;
 601
 602         if (host->pdata && host->pdata->init)
 603                 host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
 604
 605         mmc_add_host(mmc);
 606
 607         return 0;
 608
 609  out:
 610         if (host) {
 611                 if (host->dma >= 0)
 612                         pxa_free_dma(host->dma);
 613                 if (host->base)
 614                         iounmap(host->base);
 615                 if (host->sg_cpu)
 616                         dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
 617                 if (host->clk)
 618                         clk_put(host->clk);
 619         }
 620         if (mmc)
 621                 mmc_free_host(mmc);
 622         release_resource(r);
 623         return ret;
 624 }
 625
 626 static int pxamci_remove(struct platform_device *pdev)
 627 {
 628         struct mmc_host *mmc = platform_get_drvdata(pdev);
 629
 630         platform_set_drvdata(pdev, NULL);
 631
 632         if (mmc) {
 633                 struct pxamci_host *host = mmc_priv(mmc);
 634
 635                 if (host->pdata && host->pdata->exit)
 636                         host->pdata->exit(&pdev->dev, mmc);
 637
 638                 mmc_remove_host(mmc);
 639
 640                 pxamci_stop_clock(host);
 641                 writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
 642                        END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
 643                        host->base + MMC_I_MASK);
 644
 645                 DRCMR(host->dma_drcmrrx) = 0;
 646                 DRCMR(host->dma_drcmrtx) = 0;
 647
 648                 free_irq(host->irq, host);
 649                 pxa_free_dma(host->dma);
 650                 iounmap(host->base);
 651                 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
 652
 653                 clk_put(host->clk);
 654
 655                 release_resource(host->res);
 656
 657                 mmc_free_host(mmc);
 658         }
 659         return 0;
 660 }
 661
 662 #ifdef CONFIG_PM
 663 static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
 664 {
 665         struct mmc_host *mmc = platform_get_drvdata(dev);
 666         int ret = 0;
 667
 668         if (mmc)
 669                 ret = mmc_suspend_host(mmc, state);
 670
 671         return ret;
 672 }
 673
 674 static int pxamci_resume(struct platform_device *dev)
 675 {
 676         struct mmc_host *mmc = platform_get_drvdata(dev);
 677         int ret = 0;
 678
 679         if (mmc)
 680                 ret = mmc_resume_host(mmc);
 681
 682         return ret;
 683 }
 684 #else
 685 #define pxamci_suspend  NULL
 686 #define pxamci_resume   NULL
 687 #endif
 688
 689 static struct platform_driver pxamci_driver = {
 690         .probe          = pxamci_probe,
 691         .remove         = pxamci_remove,
 692         .suspend        = pxamci_suspend,
 693         .resume         = pxamci_resume,
 694         .driver         = {
 695                 .name   = DRIVER_NAME,
 696                 .owner  = THIS_MODULE,
 697         },
 698 };
 699
 700 static int __init pxamci_init(void)
 701 {
 702         return platform_driver_register(&pxamci_driver);
 703 }
 704
 705 static void __exit pxamci_exit(void)
 706 {
 707         platform_driver_unregister(&pxamci_driver);
 708 }
 709
 710 module_init(pxamci_init);
 711 module_exit(pxamci_exit);
 712
 713 MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
 714 MODULE_LICENSE("GPL");
 715 MODULE_ALIAS("platform:pxa2xx-mci");