1 #define MMC_REG_STR_STP_CLK 0x00
2 #define MMC_REG_STATUS 0x04
3 #define MMC_REG_CLK_RATE 0x08
4 #define MMC_REG_CMD_DAT_CONT 0x0C
5 #define MMC_REG_RES_TO 0x10
6 #define MMC_REG_READ_TO 0x14
7 #define MMC_REG_BLK_LEN 0x18
8 #define MMC_REG_NOB 0x1C
9 #define MMC_REG_REV_NO 0x20
10 #define MMC_REG_INT_MASK 0x24
11 #define MMC_REG_CMD 0x28
12 #define MMC_REG_ARGH 0x2C
13 #define MMC_REG_ARGL 0x30
14 #define MMC_REG_RES_FIFO 0x34
15 #define MMC_REG_BUFFER_ACCESS 0x38
17 #define STR_STP_CLK_IPG_CLK_GATE_DIS (1<<15)
18 #define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14)
19 #define STR_STP_CLK_ENDIAN (1<<5)
20 #define STR_STP_CLK_RESET (1<<3)
21 #define STR_STP_CLK_ENABLE (1<<2)
22 #define STR_STP_CLK_START_CLK (1<<1)
23 #define STR_STP_CLK_STOP_CLK (1<<0)
24 #define STATUS_CARD_PRESENCE (1<<15)
25 #define STATUS_SDIO_INT_ACTIVE (1<<14)
26 #define STATUS_END_CMD_RESP (1<<13)
27 #define STATUS_WRITE_OP_DONE (1<<12)
28 #define STATUS_DATA_TRANS_DONE (1<<11)
29 #define STATUS_WR_CRC_ERROR_CODE_MASK (3<<10)
30 #define STATUS_CARD_BUS_CLK_RUN (1<<8)
31 #define STATUS_APPL_BUFF_FF (1<<7)
32 #define STATUS_APPL_BUFF_FE (1<<6)
33 #define STATUS_RESP_CRC_ERR (1<<5)
34 #define STATUS_CRC_READ_ERR (1<<3)
35 #define STATUS_CRC_WRITE_ERR (1<<2)
36 #define STATUS_TIME_OUT_RESP (1<<1)
37 #define STATUS_TIME_OUT_READ (1<<0)
38 #define STATUS_ERR_MASK 0x2f
39 #define CLK_RATE_PRESCALER(x) ((x) & 0x7)
40 #define CLK_RATE_CLK_RATE(x) (((x) & 0x7) << 3)
41 #define CMD_DAT_CONT_CMD_RESP_LONG_OFF (1<<12)
42 #define CMD_DAT_CONT_STOP_READWAIT (1<<11)
43 #define CMD_DAT_CONT_START_READWAIT (1<<10)
44 #define CMD_DAT_CONT_BUS_WIDTH_1 (0<<8)
45 #define CMD_DAT_CONT_BUS_WIDTH_4 (2<<8)
46 #define CMD_DAT_CONT_INIT (1<<7)
47 #define CMD_DAT_CONT_BUSY (1<<6)
48 #define CMD_DAT_CONT_STREAM_BLOCK (1<<5)
49 #define CMD_DAT_CONT_WRITE (1<<4)
50 #define CMD_DAT_CONT_DATA_ENABLE (1<<3)
51 #define CMD_DAT_CONT_RESPONSE_FORMAT_R1 (1)
52 #define CMD_DAT_CONT_RESPONSE_FORMAT_R2 (2)
53 #define CMD_DAT_CONT_RESPONSE_FORMAT_R3 (3)
54 #define CMD_DAT_CONT_RESPONSE_FORMAT_R4 (4)
55 #define CMD_DAT_CONT_RESPONSE_FORMAT_R5 (5)
56 #define CMD_DAT_CONT_RESPONSE_FORMAT_R6 (6)
57 #define INT_MASK_AUTO_CARD_DETECT (1<<6)
58 #define INT_MASK_DAT0_EN (1<<5)
59 #define INT_MASK_SDIO (1<<4)
60 #define INT_MASK_BUF_READY (1<<3)
61 #define INT_MASK_END_CMD_RES (1<<2)
62 #define INT_MASK_WRITE_OP_DONE (1<<1)
63 #define INT_MASK_DATA_TRAN (1<<0)
64 #define INT_ALL (0x7f)
projects / linux-2.6 / blob