Merge branch 'linus' into core/softirq
[linux-2.6] / drivers / char / cyclades.c
1 #undef  BLOCKMOVE
2 #define Z_WAKE
3 #undef  Z_EXT_CHARS_IN_BUFFER
4
5 /*
6  *  linux/drivers/char/cyclades.c
7  *
8  * This file contains the driver for the Cyclades async multiport
9  * serial boards.
10  *
11  * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
12  * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
13  *
14  * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com>
15  *
16  * Much of the design and some of the code came from serial.c
17  * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
18  * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
19  * and then fixed as suggested by Michael K. Johnson 12/12/92.
20  * Converted to pci probing and cleaned up by Jiri Slaby.
21  *
22  * This version supports shared IRQ's (only for PCI boards).
23  *
24  * Prevent users from opening non-existing Z ports.
25  *
26  * Revision 2.3.2.8   2000/07/06 18:14:16 ivan
27  * Fixed the PCI detection function to work properly on Alpha systems.
28  * Implemented support for TIOCSERGETLSR ioctl.
29  * Implemented full support for non-standard baud rates.
30  *
31  * Revision 2.3.2.7   2000/06/01 18:26:34 ivan
32  * Request PLX I/O region, although driver doesn't use it, to avoid
33  * problems with other drivers accessing it.
34  * Removed count for on-board buffer characters in cy_chars_in_buffer
35  * (Cyclades-Z only).
36  *
37  * Revision 2.3.2.6   2000/05/05 13:56:05 ivan
38  * Driver now reports physical instead of virtual memory addresses.
39  * Masks were added to some Cyclades-Z read accesses.
40  * Implemented workaround for PLX9050 bug that would cause a system lockup
41  * in certain systems, depending on the MMIO addresses allocated to the
42  * board.
43  * Changed the Tx interrupt programming in the CD1400 chips to boost up
44  * performance (Cyclom-Y only).
45  * Code is now compliant with the new module interface (module_[init|exit]).
46  * Make use of the PCI helper functions to access PCI resources.
47  * Did some code "housekeeping".
48  *
49  * Revision 2.3.2.5   2000/01/19 14:35:33 ivan
50  * Fixed bug in cy_set_termios on CRTSCTS flag turnoff.
51  *
52  * Revision 2.3.2.4   2000/01/17 09:19:40 ivan
53  * Fixed SMP locking in Cyclom-Y interrupt handler.
54  *
55  * Revision 2.3.2.3   1999/12/28 12:11:39 ivan
56  * Added a new cyclades_card field called nports to allow the driver to
57  * know the exact number of ports found by the Z firmware after its load;
58  * RX buffer contention prevention logic on interrupt op mode revisited
59  * (Cyclades-Z only);
60  * Revisited printk's for Z debug;
61  * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
62  *
63  * Revision 2.3.2.2   1999/10/01 11:27:43 ivan
64  * Fixed bug in cyz_poll that would make all ports but port 0
65  * unable to transmit/receive data (Cyclades-Z only);
66  * Implemented logic to prevent the RX buffer from being stuck with data
67  * due to a driver / firmware race condition in interrupt op mode
68  * (Cyclades-Z only);
69  * Fixed bug in block_til_ready logic that would lead to a system crash;
70  * Revisited cy_close spinlock usage;
71  *
72  * Revision 2.3.2.1   1999/09/28 11:01:22 ivan
73  * Revisited CONFIG_PCI conditional compilation for PCI board support;
74  * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support;
75  * _Major_ cleanup on the Cyclades-Z interrupt support code / logic;
76  * Removed CTS handling from the driver -- this is now completely handled
77  * by the firmware (Cyclades-Z only);
78  * Flush RX on-board buffers on a port open (Cyclades-Z only);
79  * Fixed handling of ASYNC_SPD_* TTY flags;
80  * Module unload now unmaps all memory area allocated by ioremap;
81  *
82  * Revision 2.3.1.1   1999/07/15 16:45:53 ivan
83  * Removed CY_PROC conditional compilation;
84  * Implemented SMP-awareness for the driver;
85  * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
86  * functions;
87  * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
88  * (irq=NN) as parameters (only for ISA boards);
89  * Fixed bug in set_line_char that would prevent the Cyclades-Z
90  * ports from being configured at speeds above 115.2Kbps;
91  * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
92  * switching from working properly;
93  * The driver now only prints IRQ info for the Cyclades-Z if it's
94  * configured to work in interrupt mode;
95  *
96  * Revision 2.2.2.3   1999/06/28 11:13:29 ivan
97  * Added support for interrupt mode operation for the Z cards;
98  * Removed the driver inactivity control for the Z;
99  * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
100  * the Z firmware is not loaded yet;
101  * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
102  * same functionality;
103  * Implemented workaround for IRQ setting loss on the PCI configuration
104  * registers after a PCI bridge EEPROM reload (affects PLX9060 only);
105  *
106  * Revision 2.2.2.2  1999/05/14 17:18:15 ivan
107  * /proc entry location changed to /proc/tty/driver/cyclades;
108  * Added support to shared IRQ's (only for PCI boards);
109  * Added support for Cobalt Qube2 systems;
110  * IRQ [de]allocation scheme revisited;
111  * BREAK implementation changed in order to make use of the 'break_ctl'
112  * TTY facility;
113  * Fixed typo in TTY structure field 'driver_name';
114  * Included a PCI bridge reset and EEPROM reload in the board
115  * initialization code (for both Y and Z series).
116  *
117  * Revision 2.2.2.1  1999/04/08 16:17:43 ivan
118  * Fixed a bug in cy_wait_until_sent that was preventing the port to be
119  * closed properly after a SIGINT;
120  * Module usage counter scheme revisited;
121  * Added support to the upcoming Y PCI boards (i.e., support to additional
122  * PCI Device ID's).
123  *
124  * Revision 2.2.1.10 1999/01/20 16:14:29 ivan
125  * Removed all unnecessary page-alignement operations in ioremap calls
126  * (ioremap is currently safe for these operations).
127  *
128  * Revision 2.2.1.9  1998/12/30 18:18:30 ivan
129  * Changed access to PLX PCI bridge registers from I/O to MMIO, in
130  * order to make PLX9050-based boards work with certain motherboards.
131  *
132  * Revision 2.2.1.8  1998/11/13 12:46:20 ivan
133  * cy_close function now resets (correctly) the tty->closing flag;
134  * JIFFIES_DIFF macro fixed.
135  *
136  * Revision 2.2.1.7  1998/09/03 12:07:28 ivan
137  * Fixed bug in cy_close function, which was not informing HW of
138  * which port should have the reception disabled before doing so;
139  * fixed Cyclom-8YoP hardware detection bug.
140  *
141  * Revision 2.2.1.6  1998/08/20 17:15:39 ivan
142  * Fixed bug in cy_close function, which causes malfunction
143  * of one of the first 4 ports when a higher port is closed
144  * (Cyclom-Y only).
145  *
146  * Revision 2.2.1.5  1998/08/10 18:10:28 ivan
147  * Fixed Cyclom-4Yo hardware detection bug.
148  *
149  * Revision 2.2.1.4  1998/08/04 11:02:50 ivan
150  * /proc/cyclades implementation with great collaboration of
151  * Marc Lewis <marc@blarg.net>;
152  * cyy_interrupt was changed to avoid occurrence of kernel oopses
153  * during PPP operation.
154  *
155  * Revision 2.2.1.3  1998/06/01 12:09:10 ivan
156  * General code review in order to comply with 2.1 kernel standards;
157  * data loss prevention for slow devices revisited (cy_wait_until_sent
158  * was created);
159  * removed conditional compilation for new/old PCI structure support
160  * (now the driver only supports the new PCI structure).
161  *
162  * Revision 2.2.1.1  1998/03/19 16:43:12 ivan
163  * added conditional compilation for new/old PCI structure support;
164  * removed kernel series (2.0.x / 2.1.x) conditional compilation.
165  *
166  * Revision 2.1.1.3  1998/03/16 18:01:12 ivan
167  * cleaned up the data loss fix;
168  * fixed XON/XOFF handling once more (Cyclades-Z);
169  * general review of the driver routines;
170  * introduction of a mechanism to prevent data loss with slow
171  * printers, by forcing a delay before closing the port.
172  *
173  * Revision 2.1.1.2  1998/02/17 16:50:00 ivan
174  * fixed detection/handling of new CD1400 in Ye boards;
175  * fixed XON/XOFF handling (Cyclades-Z);
176  * fixed data loss caused by a premature port close;
177  * introduction of a flag that holds the CD1400 version ID per port
178  * (used by the CYGETCD1400VER new ioctl).
179  *
180  * Revision 2.1.1.1  1997/12/03 17:31:19 ivan
181  * Code review for the module cleanup routine;
182  * fixed RTS and DTR status report for new CD1400's in get_modem_info;
183  * includes anonymous changes regarding signal_pending.
184  *
185  * Revision 2.1  1997/11/01 17:42:41 ivan
186  * Changes in the driver to support Alpha systems (except 8Zo V_1);
187  * BREAK fix for the Cyclades-Z boards;
188  * driver inactivity control by FW implemented;
189  * introduction of flag that allows driver to take advantage of
190  * a special CD1400 feature related to HW flow control;
191  * added support for the CD1400  rev. J (Cyclom-Y boards);
192  * introduction of ioctls to:
193  *  - control the rtsdtr_inv flag (Cyclom-Y);
194  *  - control the rflow flag (Cyclom-Y);
195  *  - adjust the polling interval (Cyclades-Z);
196  *
197  * Revision 1.36.4.33  1997/06/27 19:00:00  ivan
198  * Fixes related to kernel version conditional
199  * compilation.
200  *
201  * Revision 1.36.4.32  1997/06/14 19:30:00  ivan
202  * Compatibility issues between kernels 2.0.x and
203  * 2.1.x (mainly related to clear_bit function).
204  *
205  * Revision 1.36.4.31  1997/06/03 15:30:00  ivan
206  * Changes to define the memory window according to the
207  * board type.
208  *
209  * Revision 1.36.4.30  1997/05/16 15:30:00  daniel
210  * Changes to support new cycladesZ boards.
211  *
212  * Revision 1.36.4.29  1997/05/12 11:30:00  daniel
213  * Merge of Bentson's and Daniel's version 1.36.4.28.
214  * Corrects bug in cy_detect_pci: check if there are more
215  * ports than the number of static structs allocated.
216  * Warning message during initialization if this driver is
217  * used with the new generation of cycladesZ boards.  Those
218  * will be supported only in next release of the driver.
219  * Corrects bug in cy_detect_pci and cy_detect_isa that
220  * returned wrong number of VALID boards, when a cyclomY
221  * was found with no serial modules connected.
222  * Changes to use current (2.1.x) kernel subroutine names
223  * and created macros for compilation with 2.0.x kernel,
224  * instead of the other way around.
225  *
226  * Revision 1.36.4.28  1997/05/?? ??:00:00  bentson
227  * Change queue_task_irq_off to queue_task_irq.
228  * The inline function queue_task_irq_off (tqueue.h)
229  * was removed from latest releases of 2.1.x kernel.
230  * Use of macro __init to mark the initialization
231  * routines, so memory can be reused.
232  * Also incorporate implementation of critical region
233  * in function cleanup_module() created by anonymous
234  * linuxer.
235  *
236  * Revision 1.36.4.28  1997/04/25 16:00:00  daniel
237  * Change to support new firmware that solves DCD problem:
238  * application could fail to receive SIGHUP signal when DCD
239  * varying too fast.
240  *
241  * Revision 1.36.4.27  1997/03/26 10:30:00  daniel
242  * Changed for support linux versions 2.1.X.
243  * Backward compatible with linux versions 2.0.X.
244  * Corrected illegal use of filler field in
245  * CH_CTRL struct.
246  * Deleted some debug messages.
247  *
248  * Revision 1.36.4.26  1997/02/27 12:00:00  daniel
249  * Included check for NULL tty pointer in cyz_poll.
250  *
251  * Revision 1.36.4.25  1997/02/26 16:28:30  bentson
252  * Bill Foster at Blarg! Online services noticed that
253  * some of the switch elements of -Z modem control
254  * lacked a closing "break;"
255  *
256  * Revision 1.36.4.24  1997/02/24 11:00:00  daniel
257  * Changed low water threshold for buffer xmit_buf
258  *
259  * Revision 1.36.4.23  1996/12/02 21:50:16  bentson
260  * Marcio provided fix to modem status fetch for -Z
261  *
262  * Revision 1.36.4.22  1996/10/28 22:41:17  bentson
263  * improve mapping of -Z control page (thanks to Steve
264  * Price <stevep@fa.tdktca.com> for help on this)
265  *
266  * Revision 1.36.4.21  1996/09/10 17:00:10  bentson
267  * shift from CPU-bound to memcopy in cyz_polling operation
268  *
269  * Revision 1.36.4.20  1996/09/09 18:30:32  Bentson
270  * Added support to set and report higher speeds.
271  *
272  * Revision 1.36.4.19c  1996/08/09 10:00:00  Marcio Saito
273  * Some fixes in the HW flow control for the BETA release.
274  * Don't try to register the IRQ.
275  *
276  * Revision 1.36.4.19  1996/08/08 16:23:18  Bentson
277  * make sure "cyc" appears in all kernel messages; all soft interrupts
278  * handled by same routine; recognize out-of-band reception; comment
279  * out some diagnostic messages; leave RTS/CTS flow control to hardware;
280  * fix race condition in -Z buffer management; only -Y needs to explicitly
281  * flush chars; tidy up some startup messages;
282  *
283  * Revision 1.36.4.18  1996/07/25 18:57:31  bentson
284  * shift MOD_INC_USE_COUNT location to match
285  * serial.c; purge some diagnostic messages;
286  *
287  * Revision 1.36.4.17  1996/07/25 18:01:08  bentson
288  * enable modem status messages and fetch & process them; note
289  * time of last activity type for each port; set_line_char now
290  * supports more than line 0 and treats 0 baud correctly;
291  * get_modem_info senses rs_status;
292  *
293  * Revision 1.36.4.16  1996/07/20 08:43:15  bentson
294  * barely works--now's time to turn on
295  * more features 'til it breaks
296  *
297  * Revision 1.36.4.15  1996/07/19 22:30:06  bentson
298  * check more -Z board status; shorten boot message
299  *
300  * Revision 1.36.4.14  1996/07/19 22:20:37  bentson
301  * fix reference to ch_ctrl in startup; verify return
302  * values from cyz_issue_cmd and cyz_update_channel;
303  * more stuff to get modem control correct;
304  *
305  * Revision 1.36.4.13  1996/07/11 19:53:33  bentson
306  * more -Z stuff folded in; re-order changes to put -Z stuff
307  * after -Y stuff (to make changes clearer)
308  *
309  * Revision 1.36.4.12  1996/07/11 15:40:55  bentson
310  * Add code to poll Cyclades-Z.  Add code to get & set RS-232 control.
311  * Add code to send break.  Clear firmware ID word at startup (so
312  * that other code won't talk to inactive board).
313  *
314  * Revision 1.36.4.11  1996/07/09 05:28:29  bentson
315  * add code for -Z in set_line_char
316  *
317  * Revision 1.36.4.10  1996/07/08 19:28:37  bentson
318  * fold more -Z stuff (or in some cases, error messages)
319  * into driver; add text to "don't know what to do" messages.
320  *
321  * Revision 1.36.4.9  1996/07/08 18:38:38  bentson
322  * moved compile-time flags near top of file; cosmetic changes
323  * to narrow text (to allow 2-up printing); changed many declarations
324  * to "static" to limit external symbols; shuffled code order to
325  * coalesce -Y and -Z specific code, also to put internal functions
326  * in order of tty_driver structure; added code to recognize -Z
327  * ports (and for moment, do nothing or report error); add cy_startup
328  * to parse boot command line for extra base addresses for ISA probes;
329  *
330  * Revision 1.36.4.8  1996/06/25 17:40:19  bentson
331  * reorder some code, fix types of some vars (int vs. long),
332  * add cy_setup to support user declared ISA addresses
333  *
334  * Revision 1.36.4.7  1996/06/21 23:06:18  bentson
335  * dump ioctl based firmware load (it's now a user level
336  * program); ensure uninitialzed ports cannot be used
337  *
338  * Revision 1.36.4.6  1996/06/20 23:17:19  bentson
339  * rename vars and restructure some code
340  *
341  * Revision 1.36.4.5  1996/06/14 15:09:44  bentson
342  * get right status back after boot load
343  *
344  * Revision 1.36.4.4  1996/06/13 19:51:44  bentson
345  * successfully loads firmware
346  *
347  * Revision 1.36.4.3  1996/06/13 06:08:33  bentson
348  * add more of the code for the boot/load ioctls
349  *
350  * Revision 1.36.4.2  1996/06/11 21:00:51  bentson
351  * start to add Z functionality--starting with ioctl
352  * for loading firmware
353  *
354  * Revision 1.36.4.1  1996/06/10 18:03:02  bentson
355  * added code to recognize Z/PCI card at initialization; report
356  * presence, but card is not initialized (because firmware needs
357  * to be loaded)
358  *
359  * Revision 1.36.3.8  1996/06/07 16:29:00  bentson
360  * starting minor number at zero; added missing verify_area
361  * as noted by Heiko Eißfeldt <heiko@colossus.escape.de>
362  *
363  * Revision 1.36.3.7  1996/04/19 21:06:18  bentson
364  * remove unneeded boot message & fix CLOCAL hardware flow
365  * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>);
366  * remove unused diagnostic statements; minor 0 is first;
367  *
368  * Revision 1.36.3.6  1996/03/13 13:21:17  marcio
369  * The kernel function vremap (available only in later 1.3.xx kernels)
370  * allows the access to memory addresses above the RAM. This revision
371  * of the driver supports PCI boards below 1Mb (device id 0x100) and
372  * above 1Mb (device id 0x101).
373  *
374  * Revision 1.36.3.5  1996/03/07 15:20:17  bentson
375  * Some global changes to interrupt handling spilled into
376  * this driver--mostly unused arguments in system function
377  * calls.  Also added change by Marcio Saito which should
378  * reduce lost interrupts at startup by fast processors.
379  *
380  * Revision 1.36.3.4  1995/11/13  20:45:10  bentson
381  * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed
382  * in 1.3.41 kernel to remove a possible race condition, extend
383  * some error messages, and let the driver run as a loadable module
384  * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a
385  * possible race condition.
386  * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing.
387  *
388  * Revision 1.36.3.3  1995/11/13  19:44:48  bentson
389  * Changes by Linus Torvalds in 1.3.33 kernel distribution
390  * required due to reordering of driver initialization.
391  * Drivers are now initialized *after* memory management.
392  *
393  * Revision 1.36.3.2  1995/09/08  22:07:14  bentson
394  * remove printk from ISR; fix typo
395  *
396  * Revision 1.36.3.1  1995/09/01  12:00:42  marcio
397  * Minor fixes in the PCI board support. PCI function calls in
398  * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan
399  * <duncan@okay.com>. "bad serial count" message removed.
400  *
401  * Revision 1.36.3  1995/08/22  09:19:42  marcio
402  * Cyclom-Y/PCI support added. Changes in the cy_init routine and
403  * board initialization. Changes in the boot messages. The driver
404  * supports up to 4 boards and 64 ports by default.
405  *
406  * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
407  * disambiguate between Cyclom-16Y and Cyclom-32Ye;
408  *
409  * Revision 1.36.1.3  1995/03/23  22:15:35  bentson
410  * add missing break in modem control block in ioctl switch statement
411  * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>);
412  *
413  * Revision 1.36.1.2  1995/03/22  19:16:22  bentson
414  * make sure CTS flow control is set as soon as possible (thanks
415  * to note from David Lambert <lambert@chesapeake.rps.slb.com>);
416  *
417  * Revision 1.36.1.1  1995/03/13  15:44:43  bentson
418  * initialize defaults for receive threshold and stale data timeout;
419  * cosmetic changes;
420  *
421  * Revision 1.36  1995/03/10  23:33:53  bentson
422  * added support of chips 4-7 in 32 port Cyclom-Ye;
423  * fix cy_interrupt pointer dereference problem
424  * (Joe Portman <baron@aa.net>);
425  * give better error response if open is attempted on non-existent port
426  * (Zachariah Vaum <jchryslr@netcom.com>);
427  * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>);
428  * conditional compilation for -16Y on systems with fast, noisy bus;
429  * comment out diagnostic print function;
430  * cleaned up table of base addresses;
431  * set receiver time-out period register to correct value,
432  * set receive threshold to better default values,
433  * set chip timer to more accurate 200 Hz ticking,
434  * add code to monitor and modify receive parameters
435  * (Rik Faith <faith@cs.unc.edu> Nick Simicich
436  * <njs@scifi.emi.net>);
437  *
438  * Revision 1.35  1994/12/16  13:54:18  steffen
439  * additional patch by Marcio Saito for board detection
440  * Accidently left out in 1.34
441  *
442  * Revision 1.34  1994/12/10  12:37:12  steffen
443  * This is the corrected version as suggested by Marcio Saito
444  *
445  * Revision 1.33  1994/12/01  22:41:18  bentson
446  * add hooks to support more high speeds directly; add tytso
447  * patch regarding CLOCAL wakeups
448  *
449  * Revision 1.32  1994/11/23  19:50:04  bentson
450  * allow direct kernel control of higher signalling rates;
451  * look for cards at additional locations
452  *
453  * Revision 1.31  1994/11/16  04:33:28  bentson
454  * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com--
455  * a problem in chars_in_buffer has been resolved by some
456  * small changes;  this should yield smoother output
457  *
458  * Revision 1.30  1994/11/16  04:28:05  bentson
459  * Fix from Corey Minyard, Internet: minyard@metronet.com,
460  * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to
461  * cy_hangup that appears to clear up much (all?) of the
462  * DTR glitches; also he's added/cleaned-up diagnostic messages
463  *
464  * Revision 1.29  1994/11/16  04:16:07  bentson
465  * add change proposed by Ralph Sims, ralphs@halcyon.com, to
466  * operate higher speeds in same way as other serial ports;
467  * add more serial ports (for up to two 16-port muxes).
468  *
469  * Revision 1.28  1994/11/04  00:13:16  root
470  * turn off diagnostic messages
471  *
472  * Revision 1.27  1994/11/03  23:46:37  root
473  * bunch of changes to bring driver into greater conformance
474  * with the serial.c driver (looking for missed fixes)
475  *
476  * Revision 1.26  1994/11/03  22:40:36  root
477  * automatic interrupt probing fixed.
478  *
479  * Revision 1.25  1994/11/03  20:17:02  root
480  * start to implement auto-irq
481  *
482  * Revision 1.24  1994/11/03  18:01:55  root
483  * still working on modem signals--trying not to drop DTR
484  * during the getty/login processes
485  *
486  * Revision 1.23  1994/11/03  17:51:36  root
487  * extend baud rate support; set receive threshold as function
488  * of baud rate; fix some problems with RTS/CTS;
489  *
490  * Revision 1.22  1994/11/02  18:05:35  root
491  * changed arguments to udelay to type long to get
492  * delays to be of correct duration
493  *
494  * Revision 1.21  1994/11/02  17:37:30  root
495  * employ udelay (after calibrating loops_per_second earlier
496  * in init/main.c) instead of using home-grown delay routines
497  *
498  * Revision 1.20  1994/11/02  03:11:38  root
499  * cy_chars_in_buffer forces a return value of 0 to let
500  * login work (don't know why it does); some functions
501  * that were returning EFAULT, now executes the code;
502  * more work on deciding when to disable xmit interrupts;
503  *
504  * Revision 1.19  1994/11/01  20:10:14  root
505  * define routine to start transmission interrupts (by enabling
506  * transmit interrupts); directly enable/disable modem interrupts;
507  *
508  * Revision 1.18  1994/11/01  18:40:45  bentson
509  * Don't always enable transmit interrupts in startup; interrupt on
510  * TxMpty instead of TxRdy to help characters get out before shutdown;
511  * restructure xmit interrupt to check for chars first and quit if
512  * none are ready to go; modem status (MXVRx) is upright, _not_ inverted
513  * (to my view);
514  *
515  * Revision 1.17  1994/10/30  04:39:45  bentson
516  * rename serial_driver and callout_driver to cy_serial_driver and
517  * cy_callout_driver to avoid linkage interference; initialize
518  * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port
519  * from cyclades_port structure; add paranoia check to cy_close;
520  *
521  * Revision 1.16  1994/10/30  01:14:33  bentson
522  * change major numbers; add some _early_ return statements;
523  *
524  * Revision 1.15  1994/10/29  06:43:15  bentson
525  * final tidying up for clean compile;  enable some error reporting
526  *
527  * Revision 1.14  1994/10/28  20:30:22  Bentson
528  * lots of changes to drag the driver towards the new tty_io
529  * structures and operation.  not expected to work, but may
530  * compile cleanly.
531  *
532  * Revision 1.13  1994/07/21  23:08:57  Bentson
533  * add some diagnostic cruft; support 24 lines (for testing
534  * both -8Y and -16Y cards; be more thorough in servicing all
535  * chips during interrupt; add "volatile" a few places to
536  * circumvent compiler optimizations; fix base & offset
537  * computations in block_til_ready (was causing chip 0 to
538  * stop operation)
539  *
540  * Revision 1.12  1994/07/19  16:42:11  Bentson
541  * add some hackery for kernel version 1.1.8; expand
542  * error messages; refine timing for delay loops and
543  * declare loop params volatile
544  *
545  * Revision 1.11  1994/06/11  21:53:10  bentson
546  * get use of save_car right in transmit interrupt service
547  *
548  * Revision 1.10.1.1  1994/06/11  21:31:18  bentson
549  * add some diagnostic printing; try to fix save_car stuff
550  *
551  * Revision 1.10  1994/06/11  20:36:08  bentson
552  * clean up compiler warnings
553  *
554  * Revision 1.9  1994/06/11  19:42:46  bentson
555  * added a bunch of code to support modem signalling
556  *
557  * Revision 1.8  1994/06/11  17:57:07  bentson
558  * recognize break & parity error
559  *
560  * Revision 1.7  1994/06/05  05:51:34  bentson
561  * Reorder baud table to be monotonic; add cli to CP; discard
562  * incoming characters and status if the line isn't open; start to
563  * fold code into cy_throttle; start to port get_serial_info,
564  * set_serial_info, get_modem_info, set_modem_info, and send_break
565  * from serial.c; expand cy_ioctl; relocate and expand config_setup;
566  * get flow control characters from tty struct; invalidate ports w/o
567  * hardware;
568  *
569  * Revision 1.6  1994/05/31  18:42:21  bentson
570  * add a loop-breaker in the interrupt service routine;
571  * note when port is initialized so that it can be shut
572  * down under the right conditions; receive works without
573  * any obvious errors
574  *
575  * Revision 1.5  1994/05/30  00:55:02  bentson
576  * transmit works without obvious errors
577  *
578  * Revision 1.4  1994/05/27  18:46:27  bentson
579  * incorporated more code from lib_y.c; can now print short
580  * strings under interrupt control to port zero; seems to
581  * select ports/channels/lines correctly
582  *
583  * Revision 1.3  1994/05/25  22:12:44  bentson
584  * shifting from multi-port on a card to proper multiplexor
585  * data structures;  added skeletons of most routines
586  *
587  * Revision 1.2  1994/05/19  13:21:43  bentson
588  * start to crib from other sources
589  *
590  */
591
592 #define CY_VERSION      "2.5"
593
594 /* If you need to install more boards than NR_CARDS, change the constant
595    in the definition below. No other change is necessary to support up to
596    eight boards. Beyond that you'll have to extend cy_isa_addresses. */
597
598 #define NR_CARDS        4
599
600 /*
601    If the total number of ports is larger than NR_PORTS, change this
602    constant in the definition below. No other change is necessary to
603    support more boards/ports. */
604
605 #define NR_PORTS        256
606
607 #define ZE_V1_NPORTS    64
608 #define ZO_V1   0
609 #define ZO_V2   1
610 #define ZE_V1   2
611
612 #define SERIAL_PARANOIA_CHECK
613 #undef  CY_DEBUG_OPEN
614 #undef  CY_DEBUG_THROTTLE
615 #undef  CY_DEBUG_OTHER
616 #undef  CY_DEBUG_IO
617 #undef  CY_DEBUG_COUNT
618 #undef  CY_DEBUG_DTR
619 #undef  CY_DEBUG_WAIT_UNTIL_SENT
620 #undef  CY_DEBUG_INTERRUPTS
621 #undef  CY_16Y_HACK
622 #undef  CY_ENABLE_MONITORING
623 #undef  CY_PCI_DEBUG
624
625 /*
626  * Include section
627  */
628 #include <linux/module.h>
629 #include <linux/errno.h>
630 #include <linux/signal.h>
631 #include <linux/sched.h>
632 #include <linux/timer.h>
633 #include <linux/interrupt.h>
634 #include <linux/tty.h>
635 #include <linux/tty_flip.h>
636 #include <linux/serial.h>
637 #include <linux/major.h>
638 #include <linux/string.h>
639 #include <linux/fcntl.h>
640 #include <linux/ptrace.h>
641 #include <linux/cyclades.h>
642 #include <linux/mm.h>
643 #include <linux/ioport.h>
644 #include <linux/init.h>
645 #include <linux/delay.h>
646 #include <linux/spinlock.h>
647 #include <linux/bitops.h>
648 #include <linux/firmware.h>
649
650 #include <asm/system.h>
651 #include <linux/io.h>
652 #include <asm/irq.h>
653 #include <linux/uaccess.h>
654
655 #include <linux/kernel.h>
656 #include <linux/pci.h>
657
658 #include <linux/stat.h>
659 #include <linux/proc_fs.h>
660
661 static void cy_throttle(struct tty_struct *tty);
662 static void cy_send_xchar(struct tty_struct *tty, char ch);
663
664 #define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1)
665
666 #define Z_FPGA_CHECK(card) \
667         ((readl(&((struct RUNTIME_9060 __iomem *) \
668                 ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
669
670 #define ISZLOADED(card) (((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \
671                         ((card).ctl_addr))->mail_box_0)) || \
672                         Z_FPGA_CHECK(card)) && \
673                         (ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \
674                         ((card).base_addr+ID_ADDRESS))->signature)))
675
676 #ifndef SERIAL_XMIT_SIZE
677 #define SERIAL_XMIT_SIZE        (min(PAGE_SIZE, 4096))
678 #endif
679 #define WAKEUP_CHARS            256
680
681 #define STD_COM_FLAGS (0)
682
683 /* firmware stuff */
684 #define ZL_MAX_BLOCKS   16
685 #define DRIVER_VERSION  0x02010203
686 #define RAM_SIZE 0x80000
687
688 #define Z_FPGA_LOADED(X)        ((readl(&(X)->init_ctrl) & (1<<17)) != 0)
689
690 enum zblock_type {
691         ZBLOCK_PRG = 0,
692         ZBLOCK_FPGA = 1
693 };
694
695 struct zfile_header {
696         char name[64];
697         char date[32];
698         char aux[32];
699         u32 n_config;
700         u32 config_offset;
701         u32 n_blocks;
702         u32 block_offset;
703         u32 reserved[9];
704 } __attribute__ ((packed));
705
706 struct zfile_config {
707         char name[64];
708         u32 mailbox;
709         u32 function;
710         u32 n_blocks;
711         u32 block_list[ZL_MAX_BLOCKS];
712 } __attribute__ ((packed));
713
714 struct zfile_block {
715         u32 type;
716         u32 file_offset;
717         u32 ram_offset;
718         u32 size;
719 } __attribute__ ((packed));
720
721 static struct tty_driver *cy_serial_driver;
722
723 #ifdef CONFIG_ISA
724 /* This is the address lookup table. The driver will probe for
725    Cyclom-Y/ISA boards at all addresses in here. If you want the
726    driver to probe addresses at a different address, add it to
727    this table.  If the driver is probing some other board and
728    causing problems, remove the offending address from this table.
729 */
730
731 static unsigned int cy_isa_addresses[] = {
732         0xD0000,
733         0xD2000,
734         0xD4000,
735         0xD6000,
736         0xD8000,
737         0xDA000,
738         0xDC000,
739         0xDE000,
740         0, 0, 0, 0, 0, 0, 0, 0
741 };
742
743 #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses)
744
745 #ifdef MODULE
746 static long maddr[NR_CARDS];
747 static int irq[NR_CARDS];
748
749 module_param_array(maddr, long, NULL, 0);
750 module_param_array(irq, int, NULL, 0);
751 #endif
752
753 #endif                          /* CONFIG_ISA */
754
755 /* This is the per-card data structure containing address, irq, number of
756    channels, etc. This driver supports a maximum of NR_CARDS cards.
757 */
758 static struct cyclades_card cy_card[NR_CARDS];
759
760 static int cy_next_channel;     /* next minor available */
761
762 /*
763  * This is used to look up the divisor speeds and the timeouts
764  * We're normally limited to 15 distinct baud rates.  The extra
765  * are accessed via settings in info->flags.
766  *      0,     1,     2,     3,     4,     5,     6,     7,     8,     9,
767  *     10,    11,    12,    13,    14,    15,    16,    17,    18,    19,
768  *                                               HI            VHI
769  *     20
770  */
771 static int baud_table[] = {
772         0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
773         1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
774         230400, 0
775 };
776
777 static char baud_co_25[] = {    /* 25 MHz clock option table */
778         /* value =>    00    01   02    03    04 */
779         /* divide by    8    32   128   512  2048 */
780         0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
781         0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
782 };
783
784 static char baud_bpr_25[] = {   /* 25 MHz baud rate period table */
785         0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
786         0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
787 };
788
789 static char baud_co_60[] = {    /* 60 MHz clock option table (CD1400 J) */
790         /* value =>    00    01   02    03    04 */
791         /* divide by    8    32   128   512  2048 */
792         0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
793         0x03, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
794         0x00
795 };
796
797 static char baud_bpr_60[] = {   /* 60 MHz baud rate period table (CD1400 J) */
798         0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
799         0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
800         0x21
801 };
802
803 static char baud_cor3[] = {     /* receive threshold */
804         0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
805         0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
806         0x07
807 };
808
809 /*
810  * The Cyclades driver implements HW flow control as any serial driver.
811  * The cyclades_port structure member rflow and the vector rflow_thr
812  * allows us to take advantage of a special feature in the CD1400 to avoid
813  * data loss even when the system interrupt latency is too high. These flags
814  * are to be used only with very special applications. Setting these flags
815  * requires the use of a special cable (DTR and RTS reversed). In the new
816  * CD1400-based boards (rev. 6.00 or later), there is no need for special
817  * cables.
818  */
819
820 static char rflow_thr[] = {     /* rflow threshold */
821         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
822         0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
823         0x0a
824 };
825
826 /*  The Cyclom-Ye has placed the sequential chips in non-sequential
827  *  address order.  This look-up table overcomes that problem.
828  */
829 static int cy_chip_offset[] = { 0x0000,
830         0x0400,
831         0x0800,
832         0x0C00,
833         0x0200,
834         0x0600,
835         0x0A00,
836         0x0E00
837 };
838
839 /* PCI related definitions */
840
841 #ifdef CONFIG_PCI
842 static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
843         /* PCI < 1Mb */
844         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
845         /* PCI > 1Mb */
846         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Hi) },
847         /* 4Y PCI < 1Mb */
848         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Lo) },
849         /* 4Y PCI > 1Mb */
850         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_4Y_Hi) },
851         /* 8Y PCI < 1Mb */
852         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Lo) },
853         /* 8Y PCI > 1Mb */
854         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_8Y_Hi) },
855         /* Z PCI < 1Mb */
856         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Lo) },
857         /* Z PCI > 1Mb */
858         { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Z_Hi) },
859         { }                     /* end of table */
860 };
861 MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
862 #endif
863
864 static void cy_start(struct tty_struct *);
865 static void set_line_char(struct cyclades_port *);
866 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
867 #ifdef CONFIG_ISA
868 static unsigned detect_isa_irq(void __iomem *);
869 #endif                          /* CONFIG_ISA */
870
871 static int cyclades_get_proc_info(char *, char **, off_t, int, int *, void *);
872
873 #ifndef CONFIG_CYZ_INTR
874 static void cyz_poll(unsigned long);
875
876 /* The Cyclades-Z polling cycle is defined by this variable */
877 static long cyz_polling_cycle = CZ_DEF_POLL;
878
879 static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0);
880
881 #else                           /* CONFIG_CYZ_INTR */
882 static void cyz_rx_restart(unsigned long);
883 static struct timer_list cyz_rx_full_timer[NR_PORTS];
884 #endif                          /* CONFIG_CYZ_INTR */
885
886 static inline int serial_paranoia_check(struct cyclades_port *info,
887                 char *name, const char *routine)
888 {
889 #ifdef SERIAL_PARANOIA_CHECK
890         if (!info) {
891                 printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) "
892                                 "in %s\n", name, routine);
893                 return 1;
894         }
895
896         if (info->magic != CYCLADES_MAGIC) {
897                 printk(KERN_WARNING "cyc Warning: bad magic number for serial "
898                                 "struct (%s) in %s\n", name, routine);
899                 return 1;
900         }
901 #endif
902         return 0;
903 }                               /* serial_paranoia_check */
904
905 /***********************************************************/
906 /********* Start of block of Cyclom-Y specific code ********/
907
908 /* This routine waits up to 1000 micro-seconds for the previous
909    command to the Cirrus chip to complete and then issues the
910    new command.  An error is returned if the previous command
911    didn't finish within the time limit.
912
913    This function is only called from inside spinlock-protected code.
914  */
915 static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
916 {
917         unsigned int i;
918
919         /* Check to see that the previous command has completed */
920         for (i = 0; i < 100; i++) {
921                 if (readb(base_addr + (CyCCR << index)) == 0)
922                         break;
923                 udelay(10L);
924         }
925         /* if the CCR never cleared, the previous command
926            didn't finish within the "reasonable time" */
927         if (i == 100)
928                 return -1;
929
930         /* Issue the new command */
931         cy_writeb(base_addr + (CyCCR << index), cmd);
932
933         return 0;
934 }                               /* cyy_issue_cmd */
935
936 #ifdef CONFIG_ISA
937 /* ISA interrupt detection code */
938 static unsigned detect_isa_irq(void __iomem *address)
939 {
940         int irq;
941         unsigned long irqs, flags;
942         int save_xir, save_car;
943         int index = 0;          /* IRQ probing is only for ISA */
944
945         /* forget possible initially masked and pending IRQ */
946         irq = probe_irq_off(probe_irq_on());
947
948         /* Clear interrupts on the board first */
949         cy_writeb(address + (Cy_ClrIntr << index), 0);
950         /* Cy_ClrIntr is 0x1800 */
951
952         irqs = probe_irq_on();
953         /* Wait ... */
954         udelay(5000L);
955
956         /* Enable the Tx interrupts on the CD1400 */
957         local_irq_save(flags);
958         cy_writeb(address + (CyCAR << index), 0);
959         cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
960
961         cy_writeb(address + (CyCAR << index), 0);
962         cy_writeb(address + (CySRER << index),
963                   readb(address + (CySRER << index)) | CyTxRdy);
964         local_irq_restore(flags);
965
966         /* Wait ... */
967         udelay(5000L);
968
969         /* Check which interrupt is in use */
970         irq = probe_irq_off(irqs);
971
972         /* Clean up */
973         save_xir = (u_char) readb(address + (CyTIR << index));
974         save_car = readb(address + (CyCAR << index));
975         cy_writeb(address + (CyCAR << index), (save_xir & 0x3));
976         cy_writeb(address + (CySRER << index),
977                   readb(address + (CySRER << index)) & ~CyTxRdy);
978         cy_writeb(address + (CyTIR << index), (save_xir & 0x3f));
979         cy_writeb(address + (CyCAR << index), (save_car));
980         cy_writeb(address + (Cy_ClrIntr << index), 0);
981         /* Cy_ClrIntr is 0x1800 */
982
983         return (irq > 0) ? irq : 0;
984 }
985 #endif                          /* CONFIG_ISA */
986
987 static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
988                 void __iomem *base_addr)
989 {
990         struct cyclades_port *info;
991         struct tty_struct *tty;
992         int len, index = cinfo->bus_index;
993         u8 save_xir, channel, save_car, data, char_count;
994
995 #ifdef CY_DEBUG_INTERRUPTS
996         printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
997 #endif
998         /* determine the channel & change to that context */
999         save_xir = readb(base_addr + (CyRIR << index));
1000         channel = save_xir & CyIRChannel;
1001         info = &cinfo->ports[channel + chip * 4];
1002         save_car = readb(base_addr + (CyCAR << index));
1003         cy_writeb(base_addr + (CyCAR << index), save_xir);
1004
1005         /* if there is nowhere to put the data, discard it */
1006         if (info->tty == NULL) {
1007                 if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
1008                                 CyIVRRxEx) {    /* exception */
1009                         data = readb(base_addr + (CyRDSR << index));
1010                 } else {        /* normal character reception */
1011                         char_count = readb(base_addr + (CyRDCR << index));
1012                         while (char_count--)
1013                                 data = readb(base_addr + (CyRDSR << index));
1014                 }
1015                 goto end;
1016         }
1017         /* there is an open port for this data */
1018         tty = info->tty;
1019         if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
1020                         CyIVRRxEx) {    /* exception */
1021                 data = readb(base_addr + (CyRDSR << index));
1022
1023                 /* For statistics only */
1024                 if (data & CyBREAK)
1025                         info->icount.brk++;
1026                 else if (data & CyFRAME)
1027                         info->icount.frame++;
1028                 else if (data & CyPARITY)
1029                         info->icount.parity++;
1030                 else if (data & CyOVERRUN)
1031                         info->icount.overrun++;
1032
1033                 if (data & info->ignore_status_mask) {
1034                         info->icount.rx++;
1035                         return;
1036                 }
1037                 if (tty_buffer_request_room(tty, 1)) {
1038                         if (data & info->read_status_mask) {
1039                                 if (data & CyBREAK) {
1040                                         tty_insert_flip_char(tty,
1041                                                 readb(base_addr + (CyRDSR <<
1042                                                         index)), TTY_BREAK);
1043                                         info->icount.rx++;
1044                                         if (info->flags & ASYNC_SAK)
1045                                                 do_SAK(tty);
1046                                 } else if (data & CyFRAME) {
1047                                         tty_insert_flip_char(tty,
1048                                                 readb(base_addr + (CyRDSR <<
1049                                                         index)), TTY_FRAME);
1050                                         info->icount.rx++;
1051                                         info->idle_stats.frame_errs++;
1052                                 } else if (data & CyPARITY) {
1053                                         /* Pieces of seven... */
1054                                         tty_insert_flip_char(tty,
1055                                                 readb(base_addr + (CyRDSR <<
1056                                                         index)), TTY_PARITY);
1057                                         info->icount.rx++;
1058                                         info->idle_stats.parity_errs++;
1059                                 } else if (data & CyOVERRUN) {
1060                                         tty_insert_flip_char(tty, 0,
1061                                                         TTY_OVERRUN);
1062                                         info->icount.rx++;
1063                                         /* If the flip buffer itself is
1064                                            overflowing, we still lose
1065                                            the next incoming character.
1066                                          */
1067                                         tty_insert_flip_char(tty,
1068                                                 readb(base_addr + (CyRDSR <<
1069                                                         index)), TTY_FRAME);
1070                                         info->icount.rx++;
1071                                         info->idle_stats.overruns++;
1072                                 /* These two conditions may imply */
1073                                 /* a normal read should be done. */
1074                                 /* } else if(data & CyTIMEOUT) { */
1075                                 /* } else if(data & CySPECHAR) { */
1076                                 } else {
1077                                         tty_insert_flip_char(tty, 0,
1078                                                         TTY_NORMAL);
1079                                         info->icount.rx++;
1080                                 }
1081                         } else {
1082                                 tty_insert_flip_char(tty, 0, TTY_NORMAL);
1083                                 info->icount.rx++;
1084                         }
1085                 } else {
1086                         /* there was a software buffer overrun and nothing
1087                          * could be done about it!!! */
1088                         info->icount.buf_overrun++;
1089                         info->idle_stats.overruns++;
1090                 }
1091         } else {        /* normal character reception */
1092                 /* load # chars available from the chip */
1093                 char_count = readb(base_addr + (CyRDCR << index));
1094
1095 #ifdef CY_ENABLE_MONITORING
1096                 ++info->mon.int_count;
1097                 info->mon.char_count += char_count;
1098                 if (char_count > info->mon.char_max)
1099                         info->mon.char_max = char_count;
1100                 info->mon.char_last = char_count;
1101 #endif
1102                 len = tty_buffer_request_room(tty, char_count);
1103                 while (len--) {
1104                         data = readb(base_addr + (CyRDSR << index));
1105                         tty_insert_flip_char(tty, data, TTY_NORMAL);
1106                         info->idle_stats.recv_bytes++;
1107                         info->icount.rx++;
1108 #ifdef CY_16Y_HACK
1109                         udelay(10L);
1110 #endif
1111                 }
1112                 info->idle_stats.recv_idle = jiffies;
1113         }
1114         tty_schedule_flip(tty);
1115 end:
1116         /* end of service */
1117         cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
1118         cy_writeb(base_addr + (CyCAR << index), save_car);
1119 }
1120
1121 static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
1122                 void __iomem *base_addr)
1123 {
1124         struct cyclades_port *info;
1125         int char_count, index = cinfo->bus_index;
1126         u8 save_xir, channel, save_car, outch;
1127
1128         /* Since we only get here when the transmit buffer
1129            is empty, we know we can always stuff a dozen
1130            characters. */
1131 #ifdef CY_DEBUG_INTERRUPTS
1132         printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
1133 #endif
1134
1135         /* determine the channel & change to that context */
1136         save_xir = readb(base_addr + (CyTIR << index));
1137         channel = save_xir & CyIRChannel;
1138         save_car = readb(base_addr + (CyCAR << index));
1139         cy_writeb(base_addr + (CyCAR << index), save_xir);
1140
1141         /* validate the port# (as configured and open) */
1142         if (channel + chip * 4 >= cinfo->nports) {
1143                 cy_writeb(base_addr + (CySRER << index),
1144                           readb(base_addr + (CySRER << index)) & ~CyTxRdy);
1145                 goto end;
1146         }
1147         info = &cinfo->ports[channel + chip * 4];
1148         if (info->tty == NULL) {
1149                 cy_writeb(base_addr + (CySRER << index),
1150                           readb(base_addr + (CySRER << index)) & ~CyTxRdy);
1151                 goto end;
1152         }
1153
1154         /* load the on-chip space for outbound data */
1155         char_count = info->xmit_fifo_size;
1156
1157         if (info->x_char) {     /* send special char */
1158                 outch = info->x_char;
1159                 cy_writeb(base_addr + (CyTDR << index), outch);
1160                 char_count--;
1161                 info->icount.tx++;
1162                 info->x_char = 0;
1163         }
1164
1165         if (info->breakon || info->breakoff) {
1166                 if (info->breakon) {
1167                         cy_writeb(base_addr + (CyTDR << index), 0);
1168                         cy_writeb(base_addr + (CyTDR << index), 0x81);
1169                         info->breakon = 0;
1170                         char_count -= 2;
1171                 }
1172                 if (info->breakoff) {
1173                         cy_writeb(base_addr + (CyTDR << index), 0);
1174                         cy_writeb(base_addr + (CyTDR << index), 0x83);
1175                         info->breakoff = 0;
1176                         char_count -= 2;
1177                 }
1178         }
1179
1180         while (char_count-- > 0) {
1181                 if (!info->xmit_cnt) {
1182                         if (readb(base_addr + (CySRER << index)) & CyTxMpty) {
1183                                 cy_writeb(base_addr + (CySRER << index),
1184                                         readb(base_addr + (CySRER << index)) &
1185                                                 ~CyTxMpty);
1186                         } else {
1187                                 cy_writeb(base_addr + (CySRER << index),
1188                                         (readb(base_addr + (CySRER << index)) &
1189                                                 ~CyTxRdy) | CyTxMpty);
1190                         }
1191                         goto done;
1192                 }
1193                 if (info->xmit_buf == NULL) {
1194                         cy_writeb(base_addr + (CySRER << index),
1195                                 readb(base_addr + (CySRER << index)) &
1196                                         ~CyTxRdy);
1197                         goto done;
1198                 }
1199                 if (info->tty->stopped || info->tty->hw_stopped) {
1200                         cy_writeb(base_addr + (CySRER << index),
1201                                 readb(base_addr + (CySRER << index)) &
1202                                         ~CyTxRdy);
1203                         goto done;
1204                 }
1205                 /* Because the Embedded Transmit Commands have been enabled,
1206                  * we must check to see if the escape character, NULL, is being
1207                  * sent. If it is, we must ensure that there is room for it to
1208                  * be doubled in the output stream.  Therefore we no longer
1209                  * advance the pointer when the character is fetched, but
1210                  * rather wait until after the check for a NULL output
1211                  * character. This is necessary because there may not be room
1212                  * for the two chars needed to send a NULL.)
1213                  */
1214                 outch = info->xmit_buf[info->xmit_tail];
1215                 if (outch) {
1216                         info->xmit_cnt--;
1217                         info->xmit_tail = (info->xmit_tail + 1) &
1218                                         (SERIAL_XMIT_SIZE - 1);
1219                         cy_writeb(base_addr + (CyTDR << index), outch);
1220                         info->icount.tx++;
1221                 } else {
1222                         if (char_count > 1) {
1223                                 info->xmit_cnt--;
1224                                 info->xmit_tail = (info->xmit_tail + 1) &
1225                                         (SERIAL_XMIT_SIZE - 1);
1226                                 cy_writeb(base_addr + (CyTDR << index), outch);
1227                                 cy_writeb(base_addr + (CyTDR << index), 0);
1228                                 info->icount.tx++;
1229                                 char_count--;
1230                         }
1231                 }
1232         }
1233
1234 done:
1235         tty_wakeup(info->tty);
1236 end:
1237         /* end of service */
1238         cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
1239         cy_writeb(base_addr + (CyCAR << index), save_car);
1240 }
1241
1242 static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
1243                 void __iomem *base_addr)
1244 {
1245         struct cyclades_port *info;
1246         int index = cinfo->bus_index;
1247         u8 save_xir, channel, save_car, mdm_change, mdm_status;
1248
1249         /* determine the channel & change to that context */
1250         save_xir = readb(base_addr + (CyMIR << index));
1251         channel = save_xir & CyIRChannel;
1252         info = &cinfo->ports[channel + chip * 4];
1253         save_car = readb(base_addr + (CyCAR << index));
1254         cy_writeb(base_addr + (CyCAR << index), save_xir);
1255
1256         mdm_change = readb(base_addr + (CyMISR << index));
1257         mdm_status = readb(base_addr + (CyMSVR1 << index));
1258
1259         if (!info->tty)
1260                 goto end;
1261
1262         if (mdm_change & CyANY_DELTA) {
1263                 /* For statistics only */
1264                 if (mdm_change & CyDCD)
1265                         info->icount.dcd++;
1266                 if (mdm_change & CyCTS)
1267                         info->icount.cts++;
1268                 if (mdm_change & CyDSR)
1269                         info->icount.dsr++;
1270                 if (mdm_change & CyRI)
1271                         info->icount.rng++;
1272
1273                 wake_up_interruptible(&info->delta_msr_wait);
1274         }
1275
1276         if ((mdm_change & CyDCD) && (info->flags & ASYNC_CHECK_CD)) {
1277                 if (!(mdm_status & CyDCD)) {
1278                         tty_hangup(info->tty);
1279                         info->flags &= ~ASYNC_NORMAL_ACTIVE;
1280                 }
1281                 wake_up_interruptible(&info->open_wait);
1282         }
1283         if ((mdm_change & CyCTS) && (info->flags & ASYNC_CTS_FLOW)) {
1284                 if (info->tty->hw_stopped) {
1285                         if (mdm_status & CyCTS) {
1286                                 /* cy_start isn't used
1287                                    because... !!! */
1288                                 info->tty->hw_stopped = 0;
1289                                 cy_writeb(base_addr + (CySRER << index),
1290                                         readb(base_addr + (CySRER << index)) |
1291                                                 CyTxRdy);
1292                                 tty_wakeup(info->tty);
1293                         }
1294                 } else {
1295                         if (!(mdm_status & CyCTS)) {
1296                                 /* cy_stop isn't used
1297                                    because ... !!! */
1298                                 info->tty->hw_stopped = 1;
1299                                 cy_writeb(base_addr + (CySRER << index),
1300                                         readb(base_addr + (CySRER << index)) &
1301                                                 ~CyTxRdy);
1302                         }
1303                 }
1304         }
1305 /*      if (mdm_change & CyDSR) {
1306         }
1307         if (mdm_change & CyRI) {
1308         }*/
1309 end:
1310         /* end of service */
1311         cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
1312         cy_writeb(base_addr + (CyCAR << index), save_car);
1313 }
1314
1315 /* The real interrupt service routine is called
1316    whenever the card wants its hand held--chars
1317    received, out buffer empty, modem change, etc.
1318  */
1319 static irqreturn_t cyy_interrupt(int irq, void *dev_id)
1320 {
1321         int status;
1322         struct cyclades_card *cinfo = dev_id;
1323         void __iomem *base_addr, *card_base_addr;
1324         unsigned int chip, too_many, had_work;
1325         int index;
1326
1327         if (unlikely(cinfo == NULL)) {
1328 #ifdef CY_DEBUG_INTERRUPTS
1329                 printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",
1330                                 irq);
1331 #endif
1332                 return IRQ_NONE;        /* spurious interrupt */
1333         }
1334
1335         card_base_addr = cinfo->base_addr;
1336         index = cinfo->bus_index;
1337
1338         /* card was not initialized yet (e.g. DEBUG_SHIRQ) */
1339         if (unlikely(card_base_addr == NULL))
1340                 return IRQ_HANDLED;
1341
1342         /* This loop checks all chips in the card.  Make a note whenever
1343            _any_ chip had some work to do, as this is considered an
1344            indication that there will be more to do.  Only when no chip
1345            has any work does this outermost loop exit.
1346          */
1347         do {
1348                 had_work = 0;
1349                 for (chip = 0; chip < cinfo->num_chips; chip++) {
1350                         base_addr = cinfo->base_addr +
1351                                         (cy_chip_offset[chip] << index);
1352                         too_many = 0;
1353                         while ((status = readb(base_addr +
1354                                                 (CySVRR << index))) != 0x00) {
1355                                 had_work++;
1356                         /* The purpose of the following test is to ensure that
1357                            no chip can monopolize the driver.  This forces the
1358                            chips to be checked in a round-robin fashion (after
1359                            draining each of a bunch (1000) of characters).
1360                          */
1361                                 if (1000 < too_many++)
1362                                         break;
1363                                 spin_lock(&cinfo->card_lock);
1364                                 if (status & CySRReceive) /* rx intr */
1365                                         cyy_chip_rx(cinfo, chip, base_addr);
1366                                 if (status & CySRTransmit) /* tx intr */
1367                                         cyy_chip_tx(cinfo, chip, base_addr);
1368                                 if (status & CySRModem) /* modem intr */
1369                                         cyy_chip_modem(cinfo, chip, base_addr);
1370                                 spin_unlock(&cinfo->card_lock);
1371                         }
1372                 }
1373         } while (had_work);
1374
1375         /* clear interrupts */
1376         spin_lock(&cinfo->card_lock);
1377         cy_writeb(card_base_addr + (Cy_ClrIntr << index), 0);
1378         /* Cy_ClrIntr is 0x1800 */
1379         spin_unlock(&cinfo->card_lock);
1380         return IRQ_HANDLED;
1381 }                               /* cyy_interrupt */
1382
1383 /***********************************************************/
1384 /********* End of block of Cyclom-Y specific code **********/
1385 /******** Start of block of Cyclades-Z specific code *******/
1386 /***********************************************************/
1387
1388 static int
1389 cyz_fetch_msg(struct cyclades_card *cinfo,
1390                 __u32 *channel, __u8 *cmd, __u32 *param)
1391 {
1392         struct FIRM_ID __iomem *firm_id;
1393         struct ZFW_CTRL __iomem *zfw_ctrl;
1394         struct BOARD_CTRL __iomem *board_ctrl;
1395         unsigned long loc_doorbell;
1396
1397         firm_id = cinfo->base_addr + ID_ADDRESS;
1398         if (!ISZLOADED(*cinfo))
1399                 return -1;
1400         zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
1401         board_ctrl = &zfw_ctrl->board_ctrl;
1402
1403         loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *)
1404                                   (cinfo->ctl_addr))->loc_doorbell);
1405         if (loc_doorbell) {
1406                 *cmd = (char)(0xff & loc_doorbell);
1407                 *channel = readl(&board_ctrl->fwcmd_channel);
1408                 *param = (__u32) readl(&board_ctrl->fwcmd_param);
1409                 cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
1410                           loc_doorbell, 0xffffffff);
1411                 return 1;
1412         }
1413         return 0;
1414 }                               /* cyz_fetch_msg */
1415
1416 static int
1417 cyz_issue_cmd(struct cyclades_card *cinfo,
1418                 __u32 channel, __u8 cmd, __u32 param)
1419 {
1420         struct FIRM_ID __iomem *firm_id;
1421         struct ZFW_CTRL __iomem *zfw_ctrl;
1422         struct BOARD_CTRL __iomem *board_ctrl;
1423         __u32 __iomem *pci_doorbell;
1424         unsigned int index;
1425
1426         firm_id = cinfo->base_addr + ID_ADDRESS;
1427         if (!ISZLOADED(*cinfo))
1428                 return -1;
1429
1430         zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
1431         board_ctrl = &zfw_ctrl->board_ctrl;
1432
1433         index = 0;
1434         pci_doorbell =
1435             &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
1436         while ((readl(pci_doorbell) & 0xff) != 0) {
1437                 if (index++ == 1000)
1438                         return (int)(readl(pci_doorbell) & 0xff);
1439                 udelay(50L);
1440         }
1441         cy_writel(&board_ctrl->hcmd_channel, channel);
1442         cy_writel(&board_ctrl->hcmd_param, param);
1443         cy_writel(pci_doorbell, (long)cmd);
1444
1445         return 0;
1446 }                               /* cyz_issue_cmd */
1447
1448 static void cyz_handle_rx(struct cyclades_port *info,
1449                 struct BUF_CTRL __iomem *buf_ctrl)
1450 {
1451         struct cyclades_card *cinfo = info->card;
1452         struct tty_struct *tty = info->tty;
1453         unsigned int char_count;
1454         int len;
1455 #ifdef BLOCKMOVE
1456         unsigned char *buf;
1457 #else
1458         char data;
1459 #endif
1460         __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr;
1461
1462         rx_get = new_rx_get = readl(&buf_ctrl->rx_get);
1463         rx_put = readl(&buf_ctrl->rx_put);
1464         rx_bufsize = readl(&buf_ctrl->rx_bufsize);
1465         rx_bufaddr = readl(&buf_ctrl->rx_bufaddr);
1466         if (rx_put >= rx_get)
1467                 char_count = rx_put - rx_get;
1468         else
1469                 char_count = rx_put - rx_get + rx_bufsize;
1470
1471         if (char_count) {
1472 #ifdef CY_ENABLE_MONITORING
1473                 info->mon.int_count++;
1474                 info->mon.char_count += char_count;
1475                 if (char_count > info->mon.char_max)
1476                         info->mon.char_max = char_count;
1477                 info->mon.char_last = char_count;
1478 #endif
1479                 if (tty == NULL) {
1480                         /* flush received characters */
1481                         new_rx_get = (new_rx_get + char_count) &
1482                                         (rx_bufsize - 1);
1483                         info->rflush_count++;
1484                 } else {
1485 #ifdef BLOCKMOVE
1486                 /* we'd like to use memcpy(t, f, n) and memset(s, c, count)
1487                    for performance, but because of buffer boundaries, there
1488                    may be several steps to the operation */
1489                         while (1) {
1490                                 len = tty_prepare_flip_string(tty, &buf,
1491                                                 char_count);
1492                                 if (!len)
1493                                         break;
1494
1495                                 len = min_t(unsigned int, min(len, char_count),
1496                                                 rx_bufsize - new_rx_get);
1497
1498                                 memcpy_fromio(buf, cinfo->base_addr +
1499                                                 rx_bufaddr + new_rx_get, len);
1500
1501                                 new_rx_get = (new_rx_get + len) &
1502                                                 (rx_bufsize - 1);
1503                                 char_count -= len;
1504                                 info->icount.rx += len;
1505                                 info->idle_stats.recv_bytes += len;
1506                         }
1507 #else
1508                         len = tty_buffer_request_room(tty, char_count);
1509                         while (len--) {
1510                                 data = readb(cinfo->base_addr + rx_bufaddr +
1511                                                 new_rx_get);
1512                                 new_rx_get = (new_rx_get + 1) &
1513                                                         (rx_bufsize - 1);
1514                                 tty_insert_flip_char(tty, data, TTY_NORMAL);
1515                                 info->idle_stats.recv_bytes++;
1516                                 info->icount.rx++;
1517                         }
1518 #endif
1519 #ifdef CONFIG_CYZ_INTR
1520                 /* Recalculate the number of chars in the RX buffer and issue
1521                    a cmd in case it's higher than the RX high water mark */
1522                         rx_put = readl(&buf_ctrl->rx_put);
1523                         if (rx_put >= rx_get)
1524                                 char_count = rx_put - rx_get;
1525                         else
1526                                 char_count = rx_put - rx_get + rx_bufsize;
1527                         if (char_count >= readl(&buf_ctrl->rx_threshold) &&
1528                                         !timer_pending(&cyz_rx_full_timer[
1529                                                         info->line]))
1530                                 mod_timer(&cyz_rx_full_timer[info->line],
1531                                                 jiffies + 1);
1532 #endif
1533                         info->idle_stats.recv_idle = jiffies;
1534                         tty_schedule_flip(tty);
1535                 }
1536                 /* Update rx_get */
1537                 cy_writel(&buf_ctrl->rx_get, new_rx_get);
1538         }
1539 }
1540
1541 static void cyz_handle_tx(struct cyclades_port *info,
1542                 struct BUF_CTRL __iomem *buf_ctrl)
1543 {
1544         struct cyclades_card *cinfo = info->card;
1545         struct tty_struct *tty = info->tty;
1546         u8 data;
1547         unsigned int char_count;
1548 #ifdef BLOCKMOVE
1549         int small_count;
1550 #endif
1551         __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr;
1552
1553         if (info->xmit_cnt <= 0)        /* Nothing to transmit */
1554                 return;
1555
1556         tx_get = readl(&buf_ctrl->tx_get);
1557         tx_put = readl(&buf_ctrl->tx_put);
1558         tx_bufsize = readl(&buf_ctrl->tx_bufsize);
1559         tx_bufaddr = readl(&buf_ctrl->tx_bufaddr);
1560         if (tx_put >= tx_get)
1561                 char_count = tx_get - tx_put - 1 + tx_bufsize;
1562         else
1563                 char_count = tx_get - tx_put - 1;
1564
1565         if (char_count) {
1566
1567                 if (tty == NULL)
1568                         goto ztxdone;
1569
1570                 if (info->x_char) {     /* send special char */
1571                         data = info->x_char;
1572
1573                         cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
1574                         tx_put = (tx_put + 1) & (tx_bufsize - 1);
1575                         info->x_char = 0;
1576                         char_count--;
1577                         info->icount.tx++;
1578                 }
1579 #ifdef BLOCKMOVE
1580                 while (0 < (small_count = min_t(unsigned int,
1581                                 tx_bufsize - tx_put, min_t(unsigned int,
1582                                         (SERIAL_XMIT_SIZE - info->xmit_tail),
1583                                         min_t(unsigned int, info->xmit_cnt,
1584                                                 char_count))))) {
1585
1586                         memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr +
1587                                         tx_put),
1588                                         &info->xmit_buf[info->xmit_tail],
1589                                         small_count);
1590
1591                         tx_put = (tx_put + small_count) & (tx_bufsize - 1);
1592                         char_count -= small_count;
1593                         info->icount.tx += small_count;
1594                         info->xmit_cnt -= small_count;
1595                         info->xmit_tail = (info->xmit_tail + small_count) &
1596                                         (SERIAL_XMIT_SIZE - 1);
1597                 }
1598 #else
1599                 while (info->xmit_cnt && char_count) {
1600                         data = info->xmit_buf[info->xmit_tail];
1601                         info->xmit_cnt--;
1602                         info->xmit_tail = (info->xmit_tail + 1) &
1603                                         (SERIAL_XMIT_SIZE - 1);
1604
1605                         cy_writeb(cinfo->base_addr + tx_bufaddr + tx_put, data);
1606                         tx_put = (tx_put + 1) & (tx_bufsize - 1);
1607                         char_count--;
1608                         info->icount.tx++;
1609                 }
1610 #endif
1611                 tty_wakeup(tty);
1612 ztxdone:
1613                 /* Update tx_put */
1614                 cy_writel(&buf_ctrl->tx_put, tx_put);
1615         }
1616 }
1617
1618 static void cyz_handle_cmd(struct cyclades_card *cinfo)
1619 {
1620         struct tty_struct *tty;
1621         struct cyclades_port *info;
1622         static struct FIRM_ID __iomem *firm_id;
1623         static struct ZFW_CTRL __iomem *zfw_ctrl;
1624         static struct BOARD_CTRL __iomem *board_ctrl;
1625         static struct CH_CTRL __iomem *ch_ctrl;
1626         static struct BUF_CTRL __iomem *buf_ctrl;
1627         __u32 channel;
1628         __u8 cmd;
1629         __u32 param;
1630         __u32 hw_ver, fw_ver;
1631         int special_count;
1632         int delta_count;
1633
1634         firm_id = cinfo->base_addr + ID_ADDRESS;
1635         zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
1636         board_ctrl = &zfw_ctrl->board_ctrl;
1637         fw_ver = readl(&board_ctrl->fw_version);
1638         hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
1639                         mail_box_0);
1640
1641         while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
1642                 special_count = 0;
1643                 delta_count = 0;
1644                 info = &cinfo->ports[channel];
1645                 tty = info->tty;
1646                 if (tty == NULL)
1647                         continue;
1648
1649                 ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
1650                 buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
1651
1652                 switch (cmd) {
1653                 case C_CM_PR_ERROR:
1654                         tty_insert_flip_char(tty, 0, TTY_PARITY);
1655                         info->icount.rx++;
1656                         special_count++;
1657                         break;
1658                 case C_CM_FR_ERROR:
1659                         tty_insert_flip_char(tty, 0, TTY_FRAME);
1660                         info->icount.rx++;
1661                         special_count++;
1662                         break;
1663                 case C_CM_RXBRK:
1664                         tty_insert_flip_char(tty, 0, TTY_BREAK);
1665                         info->icount.rx++;
1666                         special_count++;
1667                         break;
1668                 case C_CM_MDCD:
1669                         info->icount.dcd++;
1670                         delta_count++;
1671                         if (info->flags & ASYNC_CHECK_CD) {
1672                                 if ((fw_ver > 241 ? ((u_long) param) :
1673                                                 readl(&ch_ctrl->rs_status)) &
1674                                                 C_RS_DCD) {
1675                                         wake_up_interruptible(&info->open_wait);
1676                                 } else {
1677                                         tty_hangup(info->tty);
1678                                         wake_up_interruptible(&info->open_wait);
1679                                         info->flags &= ~ASYNC_NORMAL_ACTIVE;
1680                                 }
1681                         }
1682                         break;
1683                 case C_CM_MCTS:
1684                         info->icount.cts++;
1685                         delta_count++;
1686                         break;
1687                 case C_CM_MRI:
1688                         info->icount.rng++;
1689                         delta_count++;
1690                         break;
1691                 case C_CM_MDSR:
1692                         info->icount.dsr++;
1693                         delta_count++;
1694                         break;
1695 #ifdef Z_WAKE
1696                 case C_CM_IOCTLW:
1697                         complete(&info->shutdown_wait);
1698                         break;
1699 #endif
1700 #ifdef CONFIG_CYZ_INTR
1701                 case C_CM_RXHIWM:
1702                 case C_CM_RXNNDT:
1703                 case C_CM_INTBACK2:
1704                         /* Reception Interrupt */
1705 #ifdef CY_DEBUG_INTERRUPTS
1706                         printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
1707                                         "port %ld\n", info->card, channel);
1708 #endif
1709                         cyz_handle_rx(info, buf_ctrl);
1710                         break;
1711                 case C_CM_TXBEMPTY:
1712                 case C_CM_TXLOWWM:
1713                 case C_CM_INTBACK:
1714                         /* Transmission Interrupt */
1715 #ifdef CY_DEBUG_INTERRUPTS
1716                         printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
1717                                         "port %ld\n", info->card, channel);
1718 #endif
1719                         cyz_handle_tx(info, buf_ctrl);
1720                         break;
1721 #endif                          /* CONFIG_CYZ_INTR */
1722                 case C_CM_FATAL:
1723                         /* should do something with this !!! */
1724                         break;
1725                 default:
1726                         break;
1727                 }
1728                 if (delta_count)
1729                         wake_up_interruptible(&info->delta_msr_wait);
1730                 if (special_count)
1731                         tty_schedule_flip(tty);
1732         }
1733 }
1734
1735 #ifdef CONFIG_CYZ_INTR
1736 static irqreturn_t cyz_interrupt(int irq, void *dev_id)
1737 {
1738         struct cyclades_card *cinfo = dev_id;
1739
1740         if (unlikely(cinfo == NULL)) {
1741 #ifdef CY_DEBUG_INTERRUPTS
1742                 printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",
1743                                                                         irq);
1744 #endif
1745                 return IRQ_NONE;        /* spurious interrupt */
1746         }
1747
1748         if (unlikely(!ISZLOADED(*cinfo))) {
1749 #ifdef CY_DEBUG_INTERRUPTS
1750                 printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
1751                                 "(IRQ%d).\n", irq);
1752 #endif
1753                 return IRQ_NONE;
1754         }
1755
1756         /* Handle the interrupts */
1757         cyz_handle_cmd(cinfo);
1758
1759         return IRQ_HANDLED;
1760 }                               /* cyz_interrupt */
1761
1762 static void cyz_rx_restart(unsigned long arg)
1763 {
1764         struct cyclades_port *info = (struct cyclades_port *)arg;
1765         struct cyclades_card *card = info->card;
1766         int retval;
1767         __u32 channel = info->line - card->first_line;
1768         unsigned long flags;
1769
1770         spin_lock_irqsave(&card->card_lock, flags);
1771         retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L);
1772         if (retval != 0) {
1773                 printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n",
1774                         info->line, retval);
1775         }
1776         spin_unlock_irqrestore(&card->card_lock, flags);
1777 }
1778
1779 #else                           /* CONFIG_CYZ_INTR */
1780
1781 static void cyz_poll(unsigned long arg)
1782 {
1783         struct cyclades_card *cinfo;
1784         struct cyclades_port *info;
1785         struct tty_struct *tty;
1786         struct FIRM_ID __iomem *firm_id;
1787         struct ZFW_CTRL __iomem *zfw_ctrl;
1788         struct BOARD_CTRL __iomem *board_ctrl;
1789         struct BUF_CTRL __iomem *buf_ctrl;
1790         unsigned long expires = jiffies + HZ;
1791         unsigned int port, card;
1792
1793         for (card = 0; card < NR_CARDS; card++) {
1794                 cinfo = &cy_card[card];
1795
1796                 if (!IS_CYC_Z(*cinfo))
1797                         continue;
1798                 if (!ISZLOADED(*cinfo))
1799                         continue;
1800
1801                 firm_id = cinfo->base_addr + ID_ADDRESS;
1802                 zfw_ctrl = cinfo->base_addr +
1803                                 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
1804                 board_ctrl = &(zfw_ctrl->board_ctrl);
1805
1806         /* Skip first polling cycle to avoid racing conditions with the FW */
1807                 if (!cinfo->intr_enabled) {
1808                         cinfo->nports = (int)readl(&board_ctrl->n_channel);
1809                         cinfo->intr_enabled = 1;
1810                         continue;
1811                 }
1812
1813                 cyz_handle_cmd(cinfo);
1814
1815                 for (port = 0; port < cinfo->nports; port++) {
1816                         info = &cinfo->ports[port];
1817                         tty = info->tty;
1818                         buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
1819
1820                         if (!info->throttle)
1821                                 cyz_handle_rx(info, buf_ctrl);
1822                         cyz_handle_tx(info, buf_ctrl);
1823                 }
1824                 /* poll every 'cyz_polling_cycle' period */
1825                 expires = jiffies + cyz_polling_cycle;
1826         }
1827         mod_timer(&cyz_timerlist, expires);
1828 }                               /* cyz_poll */
1829
1830 #endif                          /* CONFIG_CYZ_INTR */
1831
1832 /********** End of block of Cyclades-Z specific code *********/
1833 /***********************************************************/
1834
1835 /* This is called whenever a port becomes active;
1836    interrupts are enabled and DTR & RTS are turned on.
1837  */
1838 static int startup(struct cyclades_port *info)
1839 {
1840         struct cyclades_card *card;
1841         unsigned long flags;
1842         int retval = 0;
1843         void __iomem *base_addr;
1844         int chip, channel, index;
1845         unsigned long page;
1846
1847         card = info->card;
1848         channel = info->line - card->first_line;
1849
1850         page = get_zeroed_page(GFP_KERNEL);
1851         if (!page)
1852                 return -ENOMEM;
1853
1854         spin_lock_irqsave(&card->card_lock, flags);
1855
1856         if (info->flags & ASYNC_INITIALIZED) {
1857                 free_page(page);
1858                 goto errout;
1859         }
1860
1861         if (!info->type) {
1862                 if (info->tty)
1863                         set_bit(TTY_IO_ERROR, &info->tty->flags);
1864                 free_page(page);
1865                 goto errout;
1866         }
1867
1868         if (info->xmit_buf)
1869                 free_page(page);
1870         else
1871                 info->xmit_buf = (unsigned char *)page;
1872
1873         spin_unlock_irqrestore(&card->card_lock, flags);
1874
1875         set_line_char(info);
1876
1877         if (!IS_CYC_Z(*card)) {
1878                 chip = channel >> 2;
1879                 channel &= 0x03;
1880                 index = card->bus_index;
1881                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
1882
1883 #ifdef CY_DEBUG_OPEN
1884                 printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, "
1885                                 "base_addr %p\n",
1886                                 card, chip, channel, base_addr);
1887 #endif
1888                 spin_lock_irqsave(&card->card_lock, flags);
1889
1890                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
1891
1892                 cy_writeb(base_addr + (CyRTPR << index),
1893                         (info->default_timeout ? info->default_timeout : 0x02));
1894                 /* 10ms rx timeout */
1895
1896                 cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
1897                                 index);
1898
1899                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
1900                 cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
1901                 cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
1902
1903 #ifdef CY_DEBUG_DTR
1904                 printk(KERN_DEBUG "cyc:startup raising DTR\n");
1905                 printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
1906                         readb(base_addr + (CyMSVR1 << index)),
1907                         readb(base_addr + (CyMSVR2 << index)));
1908 #endif
1909
1910                 cy_writeb(base_addr + (CySRER << index),
1911                         readb(base_addr + (CySRER << index)) | CyRxData);
1912                 info->flags |= ASYNC_INITIALIZED;
1913
1914                 if (info->tty)
1915                         clear_bit(TTY_IO_ERROR, &info->tty->flags);
1916                 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1917                 info->breakon = info->breakoff = 0;
1918                 memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
1919                 info->idle_stats.in_use =
1920                 info->idle_stats.recv_idle =
1921                 info->idle_stats.xmit_idle = jiffies;
1922
1923                 spin_unlock_irqrestore(&card->card_lock, flags);
1924
1925         } else {
1926                 struct FIRM_ID __iomem *firm_id;
1927                 struct ZFW_CTRL __iomem *zfw_ctrl;
1928                 struct BOARD_CTRL __iomem *board_ctrl;
1929                 struct CH_CTRL __iomem *ch_ctrl;
1930
1931                 base_addr = card->base_addr;
1932
1933                 firm_id = base_addr + ID_ADDRESS;
1934                 if (!ISZLOADED(*card))
1935                         return -ENODEV;
1936
1937                 zfw_ctrl = card->base_addr +
1938                                 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
1939                 board_ctrl = &zfw_ctrl->board_ctrl;
1940                 ch_ctrl = zfw_ctrl->ch_ctrl;
1941
1942 #ifdef CY_DEBUG_OPEN
1943                 printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
1944                         "base_addr %p\n", card, channel, base_addr);
1945 #endif
1946                 spin_lock_irqsave(&card->card_lock, flags);
1947
1948                 cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
1949 #ifdef Z_WAKE
1950 #ifdef CONFIG_CYZ_INTR
1951                 cy_writel(&ch_ctrl[channel].intr_enable,
1952                           C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
1953                           C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
1954 #else
1955                 cy_writel(&ch_ctrl[channel].intr_enable,
1956                           C_IN_IOCTLW | C_IN_MDCD);
1957 #endif                          /* CONFIG_CYZ_INTR */
1958 #else
1959 #ifdef CONFIG_CYZ_INTR
1960                 cy_writel(&ch_ctrl[channel].intr_enable,
1961                           C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
1962                           C_IN_RXNNDT | C_IN_MDCD);
1963 #else
1964                 cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD);
1965 #endif                          /* CONFIG_CYZ_INTR */
1966 #endif                          /* Z_WAKE */
1967
1968                 retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
1969                 if (retval != 0) {
1970                         printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was "
1971                                 "%x\n", info->line, retval);
1972                 }
1973
1974                 /* Flush RX buffers before raising DTR and RTS */
1975                 retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L);
1976                 if (retval != 0) {
1977                         printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was "
1978                                 "%x\n", info->line, retval);
1979                 }
1980
1981                 /* set timeout !!! */
1982                 /* set RTS and DTR !!! */
1983                 cy_writel(&ch_ctrl[channel].rs_control,
1984                         readl(&ch_ctrl[channel].rs_control) | C_RS_RTS |
1985                         C_RS_DTR);
1986                 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
1987                 if (retval != 0) {
1988                         printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
1989                                 "%x\n", info->line, retval);
1990                 }
1991 #ifdef CY_DEBUG_DTR
1992                 printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
1993 #endif
1994
1995                 /* enable send, recv, modem !!! */
1996
1997                 info->flags |= ASYNC_INITIALIZED;
1998                 if (info->tty)
1999                         clear_bit(TTY_IO_ERROR, &info->tty->flags);
2000                 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2001                 info->breakon = info->breakoff = 0;
2002                 memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
2003                 info->idle_stats.in_use =
2004                 info->idle_stats.recv_idle =
2005                 info->idle_stats.xmit_idle = jiffies;
2006
2007                 spin_unlock_irqrestore(&card->card_lock, flags);
2008         }
2009
2010 #ifdef CY_DEBUG_OPEN
2011         printk(KERN_DEBUG "cyc startup done\n");
2012 #endif
2013         return 0;
2014
2015 errout:
2016         spin_unlock_irqrestore(&card->card_lock, flags);
2017         return retval;
2018 }                               /* startup */
2019
2020 static void start_xmit(struct cyclades_port *info)
2021 {
2022         struct cyclades_card *card;
2023         unsigned long flags;
2024         void __iomem *base_addr;
2025         int chip, channel, index;
2026
2027         card = info->card;
2028         channel = info->line - card->first_line;
2029         if (!IS_CYC_Z(*card)) {
2030                 chip = channel >> 2;
2031                 channel &= 0x03;
2032                 index = card->bus_index;
2033                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
2034
2035                 spin_lock_irqsave(&card->card_lock, flags);
2036                 cy_writeb(base_addr + (CyCAR << index), channel);
2037                 cy_writeb(base_addr + (CySRER << index),
2038                         readb(base_addr + (CySRER << index)) | CyTxRdy);
2039                 spin_unlock_irqrestore(&card->card_lock, flags);
2040         } else {
2041 #ifdef CONFIG_CYZ_INTR
2042                 int retval;
2043
2044                 spin_lock_irqsave(&card->card_lock, flags);
2045                 retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L);
2046                 if (retval != 0) {
2047                         printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was "
2048                                 "%x\n", info->line, retval);
2049                 }
2050                 spin_unlock_irqrestore(&card->card_lock, flags);
2051 #else                           /* CONFIG_CYZ_INTR */
2052                 /* Don't have to do anything at this time */
2053 #endif                          /* CONFIG_CYZ_INTR */
2054         }
2055 }                               /* start_xmit */
2056
2057 /*
2058  * This routine shuts down a serial port; interrupts are disabled,
2059  * and DTR is dropped if the hangup on close termio flag is on.
2060  */
2061 static void shutdown(struct cyclades_port *info)
2062 {
2063         struct cyclades_card *card;
2064         unsigned long flags;
2065         void __iomem *base_addr;
2066         int chip, channel, index;
2067
2068         if (!(info->flags & ASYNC_INITIALIZED))
2069                 return;
2070
2071         card = info->card;
2072         channel = info->line - card->first_line;
2073         if (!IS_CYC_Z(*card)) {
2074                 chip = channel >> 2;
2075                 channel &= 0x03;
2076                 index = card->bus_index;
2077                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
2078
2079 #ifdef CY_DEBUG_OPEN
2080                 printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, "
2081                                 "channel %d, base_addr %p\n",
2082                                 card, chip, channel, base_addr);
2083 #endif
2084
2085                 spin_lock_irqsave(&card->card_lock, flags);
2086
2087                 /* Clear delta_msr_wait queue to avoid mem leaks. */
2088                 wake_up_interruptible(&info->delta_msr_wait);
2089
2090                 if (info->xmit_buf) {
2091                         unsigned char *temp;
2092                         temp = info->xmit_buf;
2093                         info->xmit_buf = NULL;
2094                         free_page((unsigned long)temp);
2095                 }
2096                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
2097                 if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
2098                         cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
2099                         cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
2100 #ifdef CY_DEBUG_DTR
2101                         printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
2102                         printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
2103                                 readb(base_addr + (CyMSVR1 << index)),
2104                                 readb(base_addr + (CyMSVR2 << index)));
2105 #endif
2106                 }
2107                 cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
2108                 /* it may be appropriate to clear _XMIT at
2109                    some later date (after testing)!!! */
2110
2111                 if (info->tty)
2112                         set_bit(TTY_IO_ERROR, &info->tty->flags);
2113                 info->flags &= ~ASYNC_INITIALIZED;
2114                 spin_unlock_irqrestore(&card->card_lock, flags);
2115         } else {
2116                 struct FIRM_ID __iomem *firm_id;
2117                 struct ZFW_CTRL __iomem *zfw_ctrl;
2118                 struct BOARD_CTRL __iomem *board_ctrl;
2119                 struct CH_CTRL __iomem *ch_ctrl;
2120                 int retval;
2121
2122                 base_addr = card->base_addr;
2123 #ifdef CY_DEBUG_OPEN
2124                 printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
2125                         "base_addr %p\n", card, channel, base_addr);
2126 #endif
2127
2128                 firm_id = base_addr + ID_ADDRESS;
2129                 if (!ISZLOADED(*card))
2130                         return;
2131
2132                 zfw_ctrl = card->base_addr +
2133                                 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
2134                 board_ctrl = &zfw_ctrl->board_ctrl;
2135                 ch_ctrl = zfw_ctrl->ch_ctrl;
2136
2137                 spin_lock_irqsave(&card->card_lock, flags);
2138
2139                 if (info->xmit_buf) {
2140                         unsigned char *temp;
2141                         temp = info->xmit_buf;
2142                         info->xmit_buf = NULL;
2143                         free_page((unsigned long)temp);
2144                 }
2145
2146                 if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
2147                         cy_writel(&ch_ctrl[channel].rs_control,
2148                                 (__u32)(readl(&ch_ctrl[channel].rs_control) &
2149                                         ~(C_RS_RTS | C_RS_DTR)));
2150                         retval = cyz_issue_cmd(info->card, channel,
2151                                         C_CM_IOCTLM, 0L);
2152                         if (retval != 0) {
2153                                 printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
2154                                         "was %x\n", info->line, retval);
2155                         }
2156 #ifdef CY_DEBUG_DTR
2157                         printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
2158 #endif
2159                 }
2160
2161                 if (info->tty)
2162                         set_bit(TTY_IO_ERROR, &info->tty->flags);
2163                 info->flags &= ~ASYNC_INITIALIZED;
2164
2165                 spin_unlock_irqrestore(&card->card_lock, flags);
2166         }
2167
2168 #ifdef CY_DEBUG_OPEN
2169         printk(KERN_DEBUG "cyc shutdown done\n");
2170 #endif
2171 }                               /* shutdown */
2172
2173 /*
2174  * ------------------------------------------------------------
2175  * cy_open() and friends
2176  * ------------------------------------------------------------
2177  */
2178
2179 static int
2180 block_til_ready(struct tty_struct *tty, struct file *filp,
2181                 struct cyclades_port *info)
2182 {
2183         DECLARE_WAITQUEUE(wait, current);
2184         struct cyclades_card *cinfo;
2185         unsigned long flags;
2186         int chip, channel, index;
2187         int retval;
2188         void __iomem *base_addr;
2189
2190         cinfo = info->card;
2191         channel = info->line - cinfo->first_line;
2192
2193         /*
2194          * If the device is in the middle of being closed, then block
2195          * until it's done, and then try again.
2196          */
2197         if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
2198                 wait_event_interruptible(info->close_wait,
2199                                 !(info->flags & ASYNC_CLOSING));
2200                 return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
2201         }
2202
2203         /*
2204          * If non-blocking mode is set, then make the check up front
2205          * and then exit.
2206          */
2207         if ((filp->f_flags & O_NONBLOCK) ||
2208                                         (tty->flags & (1 << TTY_IO_ERROR))) {
2209                 info->flags |= ASYNC_NORMAL_ACTIVE;
2210                 return 0;
2211         }
2212
2213         /*
2214          * Block waiting for the carrier detect and the line to become
2215          * free (i.e., not in use by the callout).  While we are in
2216          * this loop, info->count is dropped by one, so that
2217          * cy_close() knows when to free things.  We restore it upon
2218          * exit, either normal or abnormal.
2219          */
2220         retval = 0;
2221         add_wait_queue(&info->open_wait, &wait);
2222 #ifdef CY_DEBUG_OPEN
2223         printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
2224                 "count = %d\n", info->line, info->count);
2225 #endif
2226         spin_lock_irqsave(&cinfo->card_lock, flags);
2227         if (!tty_hung_up_p(filp))
2228                 info->count--;
2229         spin_unlock_irqrestore(&cinfo->card_lock, flags);
2230 #ifdef CY_DEBUG_COUNT
2231         printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
2232                 "%d\n", current->pid, info->count);
2233 #endif
2234         info->blocked_open++;
2235
2236         if (!IS_CYC_Z(*cinfo)) {
2237                 chip = channel >> 2;
2238                 channel &= 0x03;
2239                 index = cinfo->bus_index;
2240                 base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
2241
2242                 while (1) {
2243                         spin_lock_irqsave(&cinfo->card_lock, flags);
2244                         if ((tty->termios->c_cflag & CBAUD)) {
2245                                 cy_writeb(base_addr + (CyCAR << index),
2246                                           (u_char) channel);
2247                                 cy_writeb(base_addr + (CyMSVR1 << index),
2248                                           CyRTS);
2249                                 cy_writeb(base_addr + (CyMSVR2 << index),
2250                                           CyDTR);
2251 #ifdef CY_DEBUG_DTR
2252                                 printk(KERN_DEBUG "cyc:block_til_ready raising "
2253                                         "DTR\n");
2254                                 printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
2255                                         readb(base_addr + (CyMSVR1 << index)),
2256                                         readb(base_addr + (CyMSVR2 << index)));
2257 #endif
2258                         }
2259                         spin_unlock_irqrestore(&cinfo->card_lock, flags);
2260
2261                         set_current_state(TASK_INTERRUPTIBLE);
2262                         if (tty_hung_up_p(filp) ||
2263                                         !(info->flags & ASYNC_INITIALIZED)) {
2264                                 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
2265                                           -EAGAIN : -ERESTARTSYS);
2266                                 break;
2267                         }
2268
2269                         spin_lock_irqsave(&cinfo->card_lock, flags);
2270                         cy_writeb(base_addr + (CyCAR << index),
2271                                   (u_char) channel);
2272                         if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
2273                                         (readb(base_addr +
2274                                                 (CyMSVR1 << index)) & CyDCD))) {
2275                                 spin_unlock_irqrestore(&cinfo->card_lock, flags);
2276                                 break;
2277                         }
2278                         spin_unlock_irqrestore(&cinfo->card_lock, flags);
2279
2280                         if (signal_pending(current)) {
2281                                 retval = -ERESTARTSYS;
2282                                 break;
2283                         }
2284 #ifdef CY_DEBUG_OPEN
2285                         printk(KERN_DEBUG "cyc block_til_ready blocking: "
2286                                 "ttyC%d, count = %d\n",
2287                                 info->line, info->count);
2288 #endif
2289                         schedule();
2290                 }
2291         } else {
2292                 struct FIRM_ID __iomem *firm_id;
2293                 struct ZFW_CTRL __iomem *zfw_ctrl;
2294                 struct BOARD_CTRL __iomem *board_ctrl;
2295                 struct CH_CTRL __iomem *ch_ctrl;
2296
2297                 base_addr = cinfo->base_addr;
2298                 firm_id = base_addr + ID_ADDRESS;
2299                 if (!ISZLOADED(*cinfo)) {
2300                         __set_current_state(TASK_RUNNING);
2301                         remove_wait_queue(&info->open_wait, &wait);
2302                         return -EINVAL;
2303                 }
2304
2305                 zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)
2306                                                                 & 0xfffff);
2307                 board_ctrl = &zfw_ctrl->board_ctrl;
2308                 ch_ctrl = zfw_ctrl->ch_ctrl;
2309
2310                 while (1) {
2311                         if ((tty->termios->c_cflag & CBAUD)) {
2312                                 cy_writel(&ch_ctrl[channel].rs_control,
2313                                         readl(&ch_ctrl[channel].rs_control) |
2314                                         C_RS_RTS | C_RS_DTR);
2315                                 retval = cyz_issue_cmd(cinfo,
2316                                         channel, C_CM_IOCTLM, 0L);
2317                                 if (retval != 0) {
2318                                         printk(KERN_ERR "cyc:block_til_ready "
2319                                                 "retval on ttyC%d was %x\n",
2320                                                 info->line, retval);
2321                                 }
2322 #ifdef CY_DEBUG_DTR
2323                                 printk(KERN_DEBUG "cyc:block_til_ready raising "
2324                                         "Z DTR\n");
2325 #endif
2326                         }
2327
2328                         set_current_state(TASK_INTERRUPTIBLE);
2329                         if (tty_hung_up_p(filp) ||
2330                                         !(info->flags & ASYNC_INITIALIZED)) {
2331                                 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
2332                                           -EAGAIN : -ERESTARTSYS);
2333                                 break;
2334                         }
2335                         if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
2336                                         (readl(&ch_ctrl[channel].rs_status) &
2337                                                 C_RS_DCD))) {
2338                                 break;
2339                         }
2340                         if (signal_pending(current)) {
2341                                 retval = -ERESTARTSYS;
2342                                 break;
2343                         }
2344 #ifdef CY_DEBUG_OPEN
2345                         printk(KERN_DEBUG "cyc block_til_ready blocking: "
2346                                 "ttyC%d, count = %d\n",
2347                                 info->line, info->count);
2348 #endif
2349                         schedule();
2350                 }
2351         }
2352         __set_current_state(TASK_RUNNING);
2353         remove_wait_queue(&info->open_wait, &wait);
2354         if (!tty_hung_up_p(filp)) {
2355                 info->count++;
2356 #ifdef CY_DEBUG_COUNT
2357                 printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
2358                         "count to %d\n", current->pid, info->count);
2359 #endif
2360         }
2361         info->blocked_open--;
2362 #ifdef CY_DEBUG_OPEN
2363         printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
2364                 "count = %d\n", info->line, info->count);
2365 #endif
2366         if (retval)
2367                 return retval;
2368         info->flags |= ASYNC_NORMAL_ACTIVE;
2369         return 0;
2370 }                               /* block_til_ready */
2371
2372 /*
2373  * This routine is called whenever a serial port is opened.  It
2374  * performs the serial-specific initialization for the tty structure.
2375  */
2376 static int cy_open(struct tty_struct *tty, struct file *filp)
2377 {
2378         struct cyclades_port *info;
2379         unsigned int i, line;
2380         int retval;
2381
2382         line = tty->index;
2383         if (tty->index < 0 || NR_PORTS <= line)
2384                 return -ENODEV;
2385
2386         for (i = 0; i < NR_CARDS; i++)
2387                 if (line < cy_card[i].first_line + cy_card[i].nports &&
2388                                 line >= cy_card[i].first_line)
2389                         break;
2390         if (i >= NR_CARDS)
2391                 return -ENODEV;
2392         info = &cy_card[i].ports[line - cy_card[i].first_line];
2393         if (info->line < 0)
2394                 return -ENODEV;
2395
2396         /* If the card's firmware hasn't been loaded,
2397            treat it as absent from the system.  This
2398            will make the user pay attention.
2399          */
2400         if (IS_CYC_Z(*info->card)) {
2401                 struct cyclades_card *cinfo = info->card;
2402                 struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
2403
2404                 if (!ISZLOADED(*cinfo)) {
2405                         if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *)
2406                                          (cinfo->ctl_addr))->mail_box_0)) &&
2407                                         Z_FPGA_CHECK(*cinfo)) &&
2408                                         (ZFIRM_HLT == readl(
2409                                                 &firm_id->signature))) {
2410                                 printk(KERN_ERR "cyc:Cyclades-Z Error: you "
2411                                         "need an external power supply for "
2412                                         "this number of ports.\nFirmware "
2413                                         "halted.\n");
2414                         } else {
2415                                 printk(KERN_ERR "cyc:Cyclades-Z firmware not "
2416                                         "yet loaded\n");
2417                         }
2418                         return -ENODEV;
2419                 }
2420 #ifdef CONFIG_CYZ_INTR
2421                 else {
2422                 /* In case this Z board is operating in interrupt mode, its
2423                    interrupts should be enabled as soon as the first open
2424                    happens to one of its ports. */
2425                         if (!cinfo->intr_enabled) {
2426                                 struct ZFW_CTRL __iomem *zfw_ctrl;
2427                                 struct BOARD_CTRL __iomem *board_ctrl;
2428
2429                                 zfw_ctrl = cinfo->base_addr +
2430                                         (readl(&firm_id->zfwctrl_addr) &
2431                                          0xfffff);
2432
2433                                 board_ctrl = &zfw_ctrl->board_ctrl;
2434
2435                                 /* Enable interrupts on the PLX chip */
2436                                 cy_writew(cinfo->ctl_addr + 0x68,
2437                                         readw(cinfo->ctl_addr + 0x68) | 0x0900);
2438                                 /* Enable interrupts on the FW */
2439                                 retval = cyz_issue_cmd(cinfo, 0,
2440                                                 C_CM_IRQ_ENBL, 0L);
2441                                 if (retval != 0) {
2442                                         printk(KERN_ERR "cyc:IRQ enable retval "
2443                                                 "was %x\n", retval);
2444                                 }
2445                                 cinfo->nports =
2446                                         (int)readl(&board_ctrl->n_channel);
2447                                 cinfo->intr_enabled = 1;
2448                         }
2449                 }
2450 #endif                          /* CONFIG_CYZ_INTR */
2451                 /* Make sure this Z port really exists in hardware */
2452                 if (info->line > (cinfo->first_line + cinfo->nports - 1))
2453                         return -ENODEV;
2454         }
2455 #ifdef CY_DEBUG_OTHER
2456         printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
2457 #endif
2458         tty->driver_data = info;
2459         info->tty = tty;
2460         if (serial_paranoia_check(info, tty->name, "cy_open"))
2461                 return -ENODEV;
2462
2463 #ifdef CY_DEBUG_OPEN
2464         printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
2465                         info->count);
2466 #endif
2467         info->count++;
2468 #ifdef CY_DEBUG_COUNT
2469         printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
2470                 current->pid, info->count);
2471 #endif
2472
2473         /*
2474          * If the port is the middle of closing, bail out now
2475          */
2476         if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
2477                 wait_event_interruptible(info->close_wait,
2478                                 !(info->flags & ASYNC_CLOSING));
2479                 return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
2480         }
2481
2482         /*
2483          * Start up serial port
2484          */
2485         retval = startup(info);
2486         if (retval)
2487                 return retval;
2488
2489         retval = block_til_ready(tty, filp, info);
2490         if (retval) {
2491 #ifdef CY_DEBUG_OPEN
2492                 printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
2493                         "with %d\n", retval);
2494 #endif
2495                 return retval;
2496         }
2497
2498         info->throttle = 0;
2499
2500 #ifdef CY_DEBUG_OPEN
2501         printk(KERN_DEBUG "cyc:cy_open done\n");
2502 #endif
2503         return 0;
2504 }                               /* cy_open */
2505
2506 /*
2507  * cy_wait_until_sent() --- wait until the transmitter is empty
2508  */
2509 static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
2510 {
2511         struct cyclades_card *card;
2512         struct cyclades_port *info = tty->driver_data;
2513         void __iomem *base_addr;
2514         int chip, channel, index;
2515         unsigned long orig_jiffies;
2516         int char_time;
2517
2518         if (serial_paranoia_check(info, tty->name, "cy_wait_until_sent"))
2519                 return;
2520
2521         if (info->xmit_fifo_size == 0)
2522                 return;         /* Just in case.... */
2523
2524         orig_jiffies = jiffies;
2525         lock_kernel();
2526         /*
2527          * Set the check interval to be 1/5 of the estimated time to
2528          * send a single character, and make it at least 1.  The check
2529          * interval should also be less than the timeout.
2530          *
2531          * Note: we have to use pretty tight timings here to satisfy
2532          * the NIST-PCTS.
2533          */
2534         char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
2535         char_time = char_time / 5;
2536         if (char_time <= 0)
2537                 char_time = 1;
2538         if (timeout < 0)
2539                 timeout = 0;
2540         if (timeout)
2541                 char_time = min(char_time, timeout);
2542         /*
2543          * If the transmitter hasn't cleared in twice the approximate
2544          * amount of time to send the entire FIFO, it probably won't
2545          * ever clear.  This assumes the UART isn't doing flow
2546          * control, which is currently the case.  Hence, if it ever
2547          * takes longer than info->timeout, this is probably due to a
2548          * UART bug of some kind.  So, we clamp the timeout parameter at
2549          * 2*info->timeout.
2550          */
2551         if (!timeout || timeout > 2 * info->timeout)
2552                 timeout = 2 * info->timeout;
2553 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
2554         printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...",
2555                 timeout, char_time, jiffies);
2556 #endif
2557         card = info->card;
2558         channel = (info->line) - (card->first_line);
2559         if (!IS_CYC_Z(*card)) {
2560                 chip = channel >> 2;
2561                 channel &= 0x03;
2562                 index = card->bus_index;
2563                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
2564                 while (readb(base_addr + (CySRER << index)) & CyTxRdy) {
2565 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
2566                         printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
2567 #endif
2568                         if (msleep_interruptible(jiffies_to_msecs(char_time)))
2569                                 break;
2570                         if (timeout && time_after(jiffies, orig_jiffies +
2571                                         timeout))
2572                                 break;
2573                 }
2574         }
2575         /* Run one more char cycle */
2576         msleep_interruptible(jiffies_to_msecs(char_time * 5));
2577         unlock_kernel();
2578 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
2579         printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
2580 #endif
2581 }
2582
2583 static void cy_flush_buffer(struct tty_struct *tty)
2584 {
2585         struct cyclades_port *info = tty->driver_data;
2586         struct cyclades_card *card;
2587         int channel, retval;
2588         unsigned long flags;
2589
2590 #ifdef CY_DEBUG_IO
2591         printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
2592 #endif
2593
2594         if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
2595                 return;
2596
2597         card = info->card;
2598         channel = info->line - card->first_line;
2599
2600         spin_lock_irqsave(&card->card_lock, flags);
2601         info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2602         spin_unlock_irqrestore(&card->card_lock, flags);
2603
2604         if (IS_CYC_Z(*card)) {  /* If it is a Z card, flush the on-board
2605                                            buffers as well */
2606                 spin_lock_irqsave(&card->card_lock, flags);
2607                 retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
2608                 if (retval != 0) {
2609                         printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
2610                                 "was %x\n", info->line, retval);
2611                 }
2612                 spin_unlock_irqrestore(&card->card_lock, flags);
2613         }
2614         tty_wakeup(tty);
2615 }                               /* cy_flush_buffer */
2616
2617
2618 /*
2619  * This routine is called when a particular tty device is closed.
2620  */
2621 static void cy_close(struct tty_struct *tty, struct file *filp)
2622 {
2623         struct cyclades_port *info = tty->driver_data;
2624         struct cyclades_card *card;
2625         unsigned long flags;
2626
2627 #ifdef CY_DEBUG_OTHER
2628         printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
2629 #endif
2630
2631         if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
2632                 return;
2633
2634         card = info->card;
2635
2636         spin_lock_irqsave(&card->card_lock, flags);
2637         /* If the TTY is being hung up, nothing to do */
2638         if (tty_hung_up_p(filp)) {
2639                 spin_unlock_irqrestore(&card->card_lock, flags);
2640                 return;
2641         }
2642 #ifdef CY_DEBUG_OPEN
2643         printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
2644                 info->count);
2645 #endif
2646         if ((tty->count == 1) && (info->count != 1)) {
2647                 /*
2648                  * Uh, oh.  tty->count is 1, which means that the tty
2649                  * structure will be freed.  Info->count should always
2650                  * be one in these conditions.  If it's greater than
2651                  * one, we've got real problems, since it means the
2652                  * serial port won't be shutdown.
2653                  */
2654                 printk(KERN_ERR "cyc:cy_close: bad serial port count; "
2655                         "tty->count is 1, info->count is %d\n", info->count);
2656                 info->count = 1;
2657         }
2658 #ifdef CY_DEBUG_COUNT
2659         printk(KERN_DEBUG  "cyc:cy_close at (%d): decrementing count to %d\n",
2660                 current->pid, info->count - 1);
2661 #endif
2662         if (--info->count < 0) {
2663 #ifdef CY_DEBUG_COUNT
2664                 printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
2665 #endif
2666                 info->count = 0;
2667         }
2668         if (info->count) {
2669                 spin_unlock_irqrestore(&card->card_lock, flags);
2670                 return;
2671         }
2672         info->flags |= ASYNC_CLOSING;
2673
2674         /*
2675          * Now we wait for the transmit buffer to clear; and we notify
2676          * the line discipline to only process XON/XOFF characters.
2677          */
2678         tty->closing = 1;
2679         spin_unlock_irqrestore(&card->card_lock, flags);
2680         if (info->closing_wait != CY_CLOSING_WAIT_NONE)
2681                 tty_wait_until_sent(tty, info->closing_wait);
2682
2683         spin_lock_irqsave(&card->card_lock, flags);
2684
2685         if (!IS_CYC_Z(*card)) {
2686                 int channel = info->line - card->first_line;
2687                 int index = card->bus_index;
2688                 void __iomem *base_addr = card->base_addr +
2689                         (cy_chip_offset[channel >> 2] << index);
2690                 /* Stop accepting input */
2691                 channel &= 0x03;
2692                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
2693                 cy_writeb(base_addr + (CySRER << index),
2694                           readb(base_addr + (CySRER << index)) & ~CyRxData);
2695                 if (info->flags & ASYNC_INITIALIZED) {
2696                         /* Waiting for on-board buffers to be empty before
2697                            closing the port */
2698                         spin_unlock_irqrestore(&card->card_lock, flags);
2699                         cy_wait_until_sent(tty, info->timeout);
2700                         spin_lock_irqsave(&card->card_lock, flags);
2701                 }
2702         } else {
2703 #ifdef Z_WAKE
2704                 /* Waiting for on-board buffers to be empty before closing
2705                    the port */
2706                 void __iomem *base_addr = card->base_addr;
2707                 struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
2708                 struct ZFW_CTRL __iomem *zfw_ctrl =
2709                     base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
2710                 struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
2711                 int channel = info->line - card->first_line;
2712                 int retval;
2713
2714                 if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
2715                         retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
2716                         if (retval != 0) {
2717                                 printk(KERN_DEBUG "cyc:cy_close retval on "
2718                                         "ttyC%d was %x\n", info->line, retval);
2719                         }
2720                         spin_unlock_irqrestore(&card->card_lock, flags);
2721                         wait_for_completion_interruptible(&info->shutdown_wait);
2722                         spin_lock_irqsave(&card->card_lock, flags);
2723                 }
2724 #endif
2725         }
2726
2727         spin_unlock_irqrestore(&card->card_lock, flags);
2728         shutdown(info);
2729         cy_flush_buffer(tty);
2730         tty_ldisc_flush(tty);
2731         spin_lock_irqsave(&card->card_lock, flags);
2732
2733         tty->closing = 0;
2734         info->tty = NULL;
2735         if (info->blocked_open) {
2736                 spin_unlock_irqrestore(&card->card_lock, flags);
2737                 if (info->close_delay) {
2738                         msleep_interruptible(jiffies_to_msecs
2739                                                 (info->close_delay));
2740                 }
2741                 wake_up_interruptible(&info->open_wait);
2742                 spin_lock_irqsave(&card->card_lock, flags);
2743         }
2744         info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
2745         wake_up_interruptible(&info->close_wait);
2746
2747 #ifdef CY_DEBUG_OTHER
2748         printk(KERN_DEBUG "cyc:cy_close done\n");
2749 #endif
2750
2751         spin_unlock_irqrestore(&card->card_lock, flags);
2752 }                               /* cy_close */
2753
2754 /* This routine gets called when tty_write has put something into
2755  * the write_queue.  The characters may come from user space or
2756  * kernel space.
2757  *
2758  * This routine will return the number of characters actually
2759  * accepted for writing.
2760  *
2761  * If the port is not already transmitting stuff, start it off by
2762  * enabling interrupts.  The interrupt service routine will then
2763  * ensure that the characters are sent.
2764  * If the port is already active, there is no need to kick it.
2765  *
2766  */
2767 static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
2768 {
2769         struct cyclades_port *info = tty->driver_data;
2770         unsigned long flags;
2771         int c, ret = 0;
2772
2773 #ifdef CY_DEBUG_IO
2774         printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line);
2775 #endif
2776
2777         if (serial_paranoia_check(info, tty->name, "cy_write"))
2778                 return 0;
2779
2780         if (!info->xmit_buf)
2781                 return 0;
2782
2783         spin_lock_irqsave(&info->card->card_lock, flags);
2784         while (1) {
2785                 c = min(count, (int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1));
2786                 c = min(c, (int)(SERIAL_XMIT_SIZE - info->xmit_head));
2787
2788                 if (c <= 0)
2789                         break;
2790
2791                 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2792                 info->xmit_head = (info->xmit_head + c) &
2793                         (SERIAL_XMIT_SIZE - 1);
2794                 info->xmit_cnt += c;
2795                 buf += c;
2796                 count -= c;
2797                 ret += c;
2798         }
2799         spin_unlock_irqrestore(&info->card->card_lock, flags);
2800
2801         info->idle_stats.xmit_bytes += ret;
2802         info->idle_stats.xmit_idle = jiffies;
2803
2804         if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped)
2805                 start_xmit(info);
2806
2807         return ret;
2808 }                               /* cy_write */
2809
2810 /*
2811  * This routine is called by the kernel to write a single
2812  * character to the tty device.  If the kernel uses this routine,
2813  * it must call the flush_chars() routine (if defined) when it is
2814  * done stuffing characters into the driver.  If there is no room
2815  * in the queue, the character is ignored.
2816  */
2817 static int cy_put_char(struct tty_struct *tty, unsigned char ch)
2818 {
2819         struct cyclades_port *info = tty->driver_data;
2820         unsigned long flags;
2821
2822 #ifdef CY_DEBUG_IO
2823         printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line);
2824 #endif
2825
2826         if (serial_paranoia_check(info, tty->name, "cy_put_char"))
2827                 return 0;
2828
2829         if (!info->xmit_buf)
2830                 return 0;
2831
2832         spin_lock_irqsave(&info->card->card_lock, flags);
2833         if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) {
2834                 spin_unlock_irqrestore(&info->card->card_lock, flags);
2835                 return 0;
2836         }
2837
2838         info->xmit_buf[info->xmit_head++] = ch;
2839         info->xmit_head &= SERIAL_XMIT_SIZE - 1;
2840         info->xmit_cnt++;
2841         info->idle_stats.xmit_bytes++;
2842         info->idle_stats.xmit_idle = jiffies;
2843         spin_unlock_irqrestore(&info->card->card_lock, flags);
2844         return 1;
2845 }                               /* cy_put_char */
2846
2847 /*
2848  * This routine is called by the kernel after it has written a
2849  * series of characters to the tty device using put_char().
2850  */
2851 static void cy_flush_chars(struct tty_struct *tty)
2852 {
2853         struct cyclades_port *info = tty->driver_data;
2854
2855 #ifdef CY_DEBUG_IO
2856         printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line);
2857 #endif
2858
2859         if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
2860                 return;
2861
2862         if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2863                         !info->xmit_buf)
2864                 return;
2865
2866         start_xmit(info);
2867 }                               /* cy_flush_chars */
2868
2869 /*
2870  * This routine returns the numbers of characters the tty driver
2871  * will accept for queuing to be written.  This number is subject
2872  * to change as output buffers get emptied, or if the output flow
2873  * control is activated.
2874  */
2875 static int cy_write_room(struct tty_struct *tty)
2876 {
2877         struct cyclades_port *info = tty->driver_data;
2878         int ret;
2879
2880 #ifdef CY_DEBUG_IO
2881         printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line);
2882 #endif
2883
2884         if (serial_paranoia_check(info, tty->name, "cy_write_room"))
2885                 return 0;
2886         ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2887         if (ret < 0)
2888                 ret = 0;
2889         return ret;
2890 }                               /* cy_write_room */
2891
2892 static int cy_chars_in_buffer(struct tty_struct *tty)
2893 {
2894         struct cyclades_card *card;
2895         struct cyclades_port *info = tty->driver_data;
2896         int channel;
2897
2898         if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
2899                 return 0;
2900
2901         card = info->card;
2902         channel = (info->line) - (card->first_line);
2903
2904 #ifdef Z_EXT_CHARS_IN_BUFFER
2905         if (!IS_CYC_Z(cy_card[card])) {
2906 #endif                          /* Z_EXT_CHARS_IN_BUFFER */
2907 #ifdef CY_DEBUG_IO
2908                 printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
2909                         info->line, info->xmit_cnt);
2910 #endif
2911                 return info->xmit_cnt;
2912 #ifdef Z_EXT_CHARS_IN_BUFFER
2913         } else {
2914                 static struct FIRM_ID *firm_id;
2915                 static struct ZFW_CTRL *zfw_ctrl;
2916                 static struct CH_CTRL *ch_ctrl;
2917                 static struct BUF_CTRL *buf_ctrl;
2918                 int char_count;
2919                 __u32 tx_put, tx_get, tx_bufsize;
2920
2921                 lock_kernel();
2922                 firm_id = card->base_addr + ID_ADDRESS;
2923                 zfw_ctrl = card->base_addr +
2924                         (readl(&firm_id->zfwctrl_addr) & 0xfffff);
2925                 ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
2926                 buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
2927
2928                 tx_get = readl(&buf_ctrl->tx_get);
2929                 tx_put = readl(&buf_ctrl->tx_put);
2930                 tx_bufsize = readl(&buf_ctrl->tx_bufsize);
2931                 if (tx_put >= tx_get)
2932                         char_count = tx_put - tx_get;
2933                 else
2934                         char_count = tx_put - tx_get + tx_bufsize;
2935 #ifdef CY_DEBUG_IO
2936                 printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
2937                         info->line, info->xmit_cnt + char_count);
2938 #endif
2939                 unlock_kernel();
2940                 return info->xmit_cnt + char_count;
2941         }
2942 #endif                          /* Z_EXT_CHARS_IN_BUFFER */
2943 }                               /* cy_chars_in_buffer */
2944
2945 /*
2946  * ------------------------------------------------------------
2947  * cy_ioctl() and friends
2948  * ------------------------------------------------------------
2949  */
2950
2951 static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
2952 {
2953         int co, co_val, bpr;
2954         __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 :
2955                         25000000);
2956
2957         if (baud == 0) {
2958                 info->tbpr = info->tco = info->rbpr = info->rco = 0;
2959                 return;
2960         }
2961
2962         /* determine which prescaler to use */
2963         for (co = 4, co_val = 2048; co; co--, co_val >>= 2) {
2964                 if (cy_clock / co_val / baud > 63)
2965                         break;
2966         }
2967
2968         bpr = (cy_clock / co_val * 2 / baud + 1) / 2;
2969         if (bpr > 255)
2970                 bpr = 255;
2971
2972         info->tbpr = info->rbpr = bpr;
2973         info->tco = info->rco = co;
2974 }
2975
2976 /*
2977  * This routine finds or computes the various line characteristics.
2978  * It used to be called config_setup
2979  */
2980 static void set_line_char(struct cyclades_port *info)
2981 {
2982         struct cyclades_card *card;
2983         unsigned long flags;
2984         void __iomem *base_addr;
2985         int chip, channel, index;
2986         unsigned cflag, iflag;
2987         unsigned short chip_number;
2988         int baud, baud_rate = 0;
2989         int i;
2990
2991         if (!info->tty || !info->tty->termios)
2992                 return;
2993
2994         if (info->line == -1)
2995                 return;
2996
2997         cflag = info->tty->termios->c_cflag;
2998         iflag = info->tty->termios->c_iflag;
2999
3000         /*
3001          * Set up the tty->alt_speed kludge
3002          */
3003         if (info->tty) {
3004                 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
3005                         info->tty->alt_speed = 57600;
3006                 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
3007                         info->tty->alt_speed = 115200;
3008                 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
3009                         info->tty->alt_speed = 230400;
3010                 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
3011                         info->tty->alt_speed = 460800;
3012         }
3013
3014         card = info->card;
3015         channel = info->line - card->first_line;
3016         chip_number = channel / 4;
3017
3018         if (!IS_CYC_Z(*card)) {
3019
3020                 index = card->bus_index;
3021
3022                 /* baud rate */
3023                 baud = tty_get_baud_rate(info->tty);
3024                 if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
3025                                 ASYNC_SPD_CUST) {
3026                         if (info->custom_divisor)
3027                                 baud_rate = info->baud / info->custom_divisor;
3028                         else
3029                                 baud_rate = info->baud;
3030                 } else if (baud > CD1400_MAX_SPEED) {
3031                         baud = CD1400_MAX_SPEED;
3032                 }
3033                 /* find the baud index */
3034                 for (i = 0; i < 20; i++) {
3035                         if (baud == baud_table[i])
3036                                 break;
3037                 }
3038                 if (i == 20)
3039                         i = 19; /* CD1400_MAX_SPEED */
3040
3041                 if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
3042                                 ASYNC_SPD_CUST) {
3043                         cyy_baud_calc(info, baud_rate);
3044                 } else {
3045                         if (info->chip_rev >= CD1400_REV_J) {
3046                                 /* It is a CD1400 rev. J or later */
3047                                 info->tbpr = baud_bpr_60[i];    /* Tx BPR */
3048                                 info->tco = baud_co_60[i];      /* Tx CO */
3049                                 info->rbpr = baud_bpr_60[i];    /* Rx BPR */
3050                                 info->rco = baud_co_60[i];      /* Rx CO */
3051                         } else {
3052                                 info->tbpr = baud_bpr_25[i];    /* Tx BPR */
3053                                 info->tco = baud_co_25[i];      /* Tx CO */
3054                                 info->rbpr = baud_bpr_25[i];    /* Rx BPR */
3055                                 info->rco = baud_co_25[i];      /* Rx CO */
3056                         }
3057                 }
3058                 if (baud_table[i] == 134) {
3059                         /* get it right for 134.5 baud */
3060                         info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
3061                                         2;
3062                 } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
3063                                 ASYNC_SPD_CUST) {
3064                         info->timeout = (info->xmit_fifo_size * HZ * 15 /
3065                                         baud_rate) + 2;
3066                 } else if (baud_table[i]) {
3067                         info->timeout = (info->xmit_fifo_size * HZ * 15 /
3068                                         baud_table[i]) + 2;
3069                         /* this needs to be propagated into the card info */
3070                 } else {
3071                         info->timeout = 0;
3072                 }
3073                 /* By tradition (is it a standard?) a baud rate of zero
3074                    implies the line should be/has been closed.  A bit
3075                    later in this routine such a test is performed. */
3076
3077                 /* byte size and parity */
3078                 info->cor5 = 0;
3079                 info->cor4 = 0;
3080                 /* receive threshold */
3081                 info->cor3 = (info->default_threshold ?
3082                                 info->default_threshold : baud_cor3[i]);
3083                 info->cor2 = CyETC;
3084                 switch (cflag & CSIZE) {
3085                 case CS5:
3086                         info->cor1 = Cy_5_BITS;
3087                         break;
3088                 case CS6:
3089                         info->cor1 = Cy_6_BITS;
3090                         break;
3091                 case CS7:
3092                         info->cor1 = Cy_7_BITS;
3093                         break;
3094                 case CS8:
3095                         info->cor1 = Cy_8_BITS;
3096                         break;
3097                 }
3098                 if (cflag & CSTOPB)
3099                         info->cor1 |= Cy_2_STOP;
3100
3101                 if (cflag & PARENB) {
3102                         if (cflag & PARODD)
3103                                 info->cor1 |= CyPARITY_O;
3104                         else
3105                                 info->cor1 |= CyPARITY_E;
3106                 } else
3107                         info->cor1 |= CyPARITY_NONE;
3108
3109                 /* CTS flow control flag */
3110                 if (cflag & CRTSCTS) {
3111                         info->flags |= ASYNC_CTS_FLOW;
3112                         info->cor2 |= CyCtsAE;
3113                 } else {
3114                         info->flags &= ~ASYNC_CTS_FLOW;
3115                         info->cor2 &= ~CyCtsAE;
3116                 }
3117                 if (cflag & CLOCAL)
3118                         info->flags &= ~ASYNC_CHECK_CD;
3119                 else
3120                         info->flags |= ASYNC_CHECK_CD;
3121
3122          /***********************************************
3123             The hardware option, CyRtsAO, presents RTS when
3124             the chip has characters to send.  Since most modems
3125             use RTS as reverse (inbound) flow control, this
3126             option is not used.  If inbound flow control is
3127             necessary, DTR can be programmed to provide the
3128             appropriate signals for use with a non-standard
3129             cable.  Contact Marcio Saito for details.
3130          ***********************************************/
3131
3132                 chip = channel >> 2;
3133                 channel &= 0x03;
3134                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3135
3136                 spin_lock_irqsave(&card->card_lock, flags);
3137                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
3138
3139                 /* tx and rx baud rate */
3140
3141                 cy_writeb(base_addr + (CyTCOR << index), info->tco);
3142                 cy_writeb(base_addr + (CyTBPR << index), info->tbpr);
3143                 cy_writeb(base_addr + (CyRCOR << index), info->rco);
3144                 cy_writeb(base_addr + (CyRBPR << index), info->rbpr);
3145
3146                 /* set line characteristics  according configuration */
3147
3148                 cy_writeb(base_addr + (CySCHR1 << index),
3149                           START_CHAR(info->tty));
3150                 cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty));
3151                 cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
3152                 cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
3153                 cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
3154                 cy_writeb(base_addr + (CyCOR4 << index), info->cor4);
3155                 cy_writeb(base_addr + (CyCOR5 << index), info->cor5);
3156
3157                 cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
3158                                 CyCOR3ch, index);
3159
3160                 /* !!! Is this needed? */
3161                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
3162                 cy_writeb(base_addr + (CyRTPR << index),
3163                         (info->default_timeout ? info->default_timeout : 0x02));
3164                 /* 10ms rx timeout */
3165
3166                 if (C_CLOCAL(info->tty)) {
3167                         /* without modem intr */
3168                         cy_writeb(base_addr + (CySRER << index),
3169                                 readb(base_addr + (CySRER << index)) | CyMdmCh);
3170                         /* act on 1->0 modem transitions */
3171                         if ((cflag & CRTSCTS) && info->rflow) {
3172                                 cy_writeb(base_addr + (CyMCOR1 << index),
3173                                           (CyCTS | rflow_thr[i]));
3174                         } else {
3175                                 cy_writeb(base_addr + (CyMCOR1 << index),
3176                                           CyCTS);
3177                         }
3178                         /* act on 0->1 modem transitions */
3179                         cy_writeb(base_addr + (CyMCOR2 << index), CyCTS);
3180                 } else {
3181                         /* without modem intr */
3182                         cy_writeb(base_addr + (CySRER << index),
3183                                   readb(base_addr +
3184                                            (CySRER << index)) | CyMdmCh);
3185                         /* act on 1->0 modem transitions */
3186                         if ((cflag & CRTSCTS) && info->rflow) {
3187                                 cy_writeb(base_addr + (CyMCOR1 << index),
3188                                           (CyDSR | CyCTS | CyRI | CyDCD |
3189                                            rflow_thr[i]));
3190                         } else {
3191                                 cy_writeb(base_addr + (CyMCOR1 << index),
3192                                           CyDSR | CyCTS | CyRI | CyDCD);
3193                         }
3194                         /* act on 0->1 modem transitions */
3195                         cy_writeb(base_addr + (CyMCOR2 << index),
3196                                   CyDSR | CyCTS | CyRI | CyDCD);
3197                 }
3198
3199                 if (i == 0) {   /* baud rate is zero, turn off line */
3200                         if (info->rtsdtr_inv) {
3201                                 cy_writeb(base_addr + (CyMSVR1 << index),
3202                                           ~CyRTS);
3203                         } else {
3204                                 cy_writeb(base_addr + (CyMSVR2 << index),
3205                                           ~CyDTR);
3206                         }
3207 #ifdef CY_DEBUG_DTR
3208                         printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
3209                         printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
3210                                 readb(base_addr + (CyMSVR1 << index)),
3211                                 readb(base_addr + (CyMSVR2 << index)));
3212 #endif
3213                 } else {
3214                         if (info->rtsdtr_inv) {
3215                                 cy_writeb(base_addr + (CyMSVR1 << index),
3216                                           CyRTS);
3217                         } else {
3218                                 cy_writeb(base_addr + (CyMSVR2 << index),
3219                                           CyDTR);
3220                         }
3221 #ifdef CY_DEBUG_DTR
3222                         printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
3223                         printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
3224                                 readb(base_addr + (CyMSVR1 << index)),
3225                                 readb(base_addr + (CyMSVR2 << index)));
3226 #endif
3227                 }
3228
3229                 if (info->tty)
3230                         clear_bit(TTY_IO_ERROR, &info->tty->flags);
3231                 spin_unlock_irqrestore(&card->card_lock, flags);
3232
3233         } else {
3234                 struct FIRM_ID __iomem *firm_id;
3235                 struct ZFW_CTRL __iomem *zfw_ctrl;
3236                 struct BOARD_CTRL __iomem *board_ctrl;
3237                 struct CH_CTRL __iomem *ch_ctrl;
3238                 struct BUF_CTRL __iomem *buf_ctrl;
3239                 __u32 sw_flow;
3240                 int retval;
3241
3242                 firm_id = card->base_addr + ID_ADDRESS;
3243                 if (!ISZLOADED(*card))
3244                         return;
3245
3246                 zfw_ctrl = card->base_addr +
3247                         (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3248                 board_ctrl = &zfw_ctrl->board_ctrl;
3249                 ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
3250                 buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
3251
3252                 /* baud rate */
3253                 baud = tty_get_baud_rate(info->tty);
3254                 if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
3255                                 ASYNC_SPD_CUST) {
3256                         if (info->custom_divisor)
3257                                 baud_rate = info->baud / info->custom_divisor;
3258                         else
3259                                 baud_rate = info->baud;
3260                 } else if (baud > CYZ_MAX_SPEED) {
3261                         baud = CYZ_MAX_SPEED;
3262                 }
3263                 cy_writel(&ch_ctrl->comm_baud, baud);
3264
3265                 if (baud == 134) {
3266                         /* get it right for 134.5 baud */
3267                         info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
3268                                         2;
3269                 } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
3270                                 ASYNC_SPD_CUST) {
3271                         info->timeout = (info->xmit_fifo_size * HZ * 15 /
3272                                         baud_rate) + 2;
3273                 } else if (baud) {
3274                         info->timeout = (info->xmit_fifo_size * HZ * 15 /
3275                                         baud) + 2;
3276                         /* this needs to be propagated into the card info */
3277                 } else {
3278                         info->timeout = 0;
3279                 }
3280
3281                 /* byte size and parity */
3282                 switch (cflag & CSIZE) {
3283                 case CS5:
3284                         cy_writel(&ch_ctrl->comm_data_l, C_DL_CS5);
3285                         break;
3286                 case CS6:
3287                         cy_writel(&ch_ctrl->comm_data_l, C_DL_CS6);
3288                         break;
3289                 case CS7:
3290                         cy_writel(&ch_ctrl->comm_data_l, C_DL_CS7);
3291                         break;
3292                 case CS8:
3293                         cy_writel(&ch_ctrl->comm_data_l, C_DL_CS8);
3294                         break;
3295                 }
3296                 if (cflag & CSTOPB) {
3297                         cy_writel(&ch_ctrl->comm_data_l,
3298                                   readl(&ch_ctrl->comm_data_l) | C_DL_2STOP);
3299                 } else {
3300                         cy_writel(&ch_ctrl->comm_data_l,
3301                                   readl(&ch_ctrl->comm_data_l) | C_DL_1STOP);
3302                 }
3303                 if (cflag & PARENB) {
3304                         if (cflag & PARODD)
3305                                 cy_writel(&ch_ctrl->comm_parity, C_PR_ODD);
3306                         else
3307                                 cy_writel(&ch_ctrl->comm_parity, C_PR_EVEN);
3308                 } else
3309                         cy_writel(&ch_ctrl->comm_parity, C_PR_NONE);
3310
3311                 /* CTS flow control flag */
3312                 if (cflag & CRTSCTS) {
3313                         cy_writel(&ch_ctrl->hw_flow,
3314                                 readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS);
3315                 } else {
3316                         cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) &
3317                                         ~(C_RS_CTS | C_RS_RTS));
3318                 }
3319                 /* As the HW flow control is done in firmware, the driver
3320                    doesn't need to care about it */
3321                 info->flags &= ~ASYNC_CTS_FLOW;
3322
3323                 /* XON/XOFF/XANY flow control flags */
3324                 sw_flow = 0;
3325                 if (iflag & IXON) {
3326                         sw_flow |= C_FL_OXX;
3327                         if (iflag & IXANY)
3328                                 sw_flow |= C_FL_OIXANY;
3329                 }
3330                 cy_writel(&ch_ctrl->sw_flow, sw_flow);
3331
3332                 retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L);
3333                 if (retval != 0) {
3334                         printk(KERN_ERR "cyc:set_line_char retval on ttyC%d "
3335                                 "was %x\n", info->line, retval);
3336                 }
3337
3338                 /* CD sensitivity */
3339                 if (cflag & CLOCAL)
3340                         info->flags &= ~ASYNC_CHECK_CD;
3341                 else
3342                         info->flags |= ASYNC_CHECK_CD;
3343
3344                 if (baud == 0) {        /* baud rate is zero, turn off line */
3345                         cy_writel(&ch_ctrl->rs_control,
3346                                   readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
3347 #ifdef CY_DEBUG_DTR
3348                         printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n");
3349 #endif
3350                 } else {
3351                         cy_writel(&ch_ctrl->rs_control,
3352                                   readl(&ch_ctrl->rs_control) | C_RS_DTR);
3353 #ifdef CY_DEBUG_DTR
3354                         printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n");
3355 #endif
3356                 }
3357
3358                 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
3359                 if (retval != 0) {
3360                         printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d "
3361                                 "was %x\n", info->line, retval);
3362                 }
3363
3364                 if (info->tty)
3365                         clear_bit(TTY_IO_ERROR, &info->tty->flags);
3366         }
3367 }                               /* set_line_char */
3368
3369 static int
3370 get_serial_info(struct cyclades_port *info,
3371                 struct serial_struct __user *retinfo)
3372 {
3373         struct serial_struct tmp;
3374         struct cyclades_card *cinfo = info->card;
3375
3376         if (!retinfo)
3377                 return -EFAULT;
3378         memset(&tmp, 0, sizeof(tmp));
3379         tmp.type = info->type;
3380         tmp.line = info->line;
3381         tmp.port = (info->card - cy_card) * 0x100 + info->line -
3382                 cinfo->first_line;
3383         tmp.irq = cinfo->irq;
3384         tmp.flags = info->flags;
3385         tmp.close_delay = info->close_delay;
3386         tmp.closing_wait = info->closing_wait;
3387         tmp.baud_base = info->baud;
3388         tmp.custom_divisor = info->custom_divisor;
3389         tmp.hub6 = 0;           /*!!! */
3390         return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
3391 }                               /* get_serial_info */
3392
3393 static int
3394 set_serial_info(struct cyclades_port *info,
3395                 struct serial_struct __user *new_info)
3396 {
3397         struct serial_struct new_serial;
3398         struct cyclades_port old_info;
3399
3400         if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
3401                 return -EFAULT;
3402         old_info = *info;
3403
3404         if (!capable(CAP_SYS_ADMIN)) {
3405                 if (new_serial.close_delay != info->close_delay ||
3406                                 new_serial.baud_base != info->baud ||
3407                                 (new_serial.flags & ASYNC_FLAGS &
3408                                         ~ASYNC_USR_MASK) !=
3409                                 (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
3410                         return -EPERM;
3411                 info->flags = (info->flags & ~ASYNC_USR_MASK) |
3412                                 (new_serial.flags & ASYNC_USR_MASK);
3413                 info->baud = new_serial.baud_base;
3414                 info->custom_divisor = new_serial.custom_divisor;
3415                 goto check_and_exit;
3416         }
3417
3418         /*
3419          * OK, past this point, all the error checking has been done.
3420          * At this point, we start making changes.....
3421          */
3422
3423         info->baud = new_serial.baud_base;
3424         info->custom_divisor = new_serial.custom_divisor;
3425         info->flags = (info->flags & ~ASYNC_FLAGS) |
3426                         (new_serial.flags & ASYNC_FLAGS);
3427         info->close_delay = new_serial.close_delay * HZ / 100;
3428         info->closing_wait = new_serial.closing_wait * HZ / 100;
3429
3430 check_and_exit:
3431         if (info->flags & ASYNC_INITIALIZED) {
3432                 set_line_char(info);
3433                 return 0;
3434         } else {
3435                 return startup(info);
3436         }
3437 }                               /* set_serial_info */
3438
3439 /*
3440  * get_lsr_info - get line status register info
3441  *
3442  * Purpose: Let user call ioctl() to get info when the UART physically
3443  *          is emptied.  On bus types like RS485, the transmitter must
3444  *          release the bus after transmitting. This must be done when
3445  *          the transmit shift register is empty, not be done when the
3446  *          transmit holding register is empty.  This functionality
3447  *          allows an RS485 driver to be written in user space.
3448  */
3449 static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
3450 {
3451         struct cyclades_card *card;
3452         int chip, channel, index;
3453         unsigned char status;
3454         unsigned int result;
3455         unsigned long flags;
3456         void __iomem *base_addr;
3457
3458         card = info->card;
3459         channel = (info->line) - (card->first_line);
3460         if (!IS_CYC_Z(*card)) {
3461                 chip = channel >> 2;
3462                 channel &= 0x03;
3463                 index = card->bus_index;
3464                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3465
3466                 spin_lock_irqsave(&card->card_lock, flags);
3467                 status = readb(base_addr + (CySRER << index)) &
3468                                 (CyTxRdy | CyTxMpty);
3469                 spin_unlock_irqrestore(&card->card_lock, flags);
3470                 result = (status ? 0 : TIOCSER_TEMT);
3471         } else {
3472                 /* Not supported yet */
3473                 return -EINVAL;
3474         }
3475         return put_user(result, (unsigned long __user *)value);
3476 }
3477
3478 static int cy_tiocmget(struct tty_struct *tty, struct file *file)
3479 {
3480         struct cyclades_port *info = tty->driver_data;
3481         struct cyclades_card *card;
3482         int chip, channel, index;
3483         void __iomem *base_addr;
3484         unsigned long flags;
3485         unsigned char status;
3486         unsigned long lstatus;
3487         unsigned int result;
3488         struct FIRM_ID __iomem *firm_id;
3489         struct ZFW_CTRL __iomem *zfw_ctrl;
3490         struct BOARD_CTRL __iomem *board_ctrl;
3491         struct CH_CTRL __iomem *ch_ctrl;
3492
3493         if (serial_paranoia_check(info, tty->name, __func__))
3494                 return -ENODEV;
3495
3496         lock_kernel();
3497
3498         card = info->card;
3499         channel = info->line - card->first_line;
3500         if (!IS_CYC_Z(*card)) {
3501                 chip = channel >> 2;
3502                 channel &= 0x03;
3503                 index = card->bus_index;
3504                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3505
3506                 spin_lock_irqsave(&card->card_lock, flags);
3507                 cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
3508                 status = readb(base_addr + (CyMSVR1 << index));
3509                 status |= readb(base_addr + (CyMSVR2 << index));
3510                 spin_unlock_irqrestore(&card->card_lock, flags);
3511
3512                 if (info->rtsdtr_inv) {
3513                         result = ((status & CyRTS) ? TIOCM_DTR : 0) |
3514                                 ((status & CyDTR) ? TIOCM_RTS : 0);
3515                 } else {
3516                         result = ((status & CyRTS) ? TIOCM_RTS : 0) |
3517                                 ((status & CyDTR) ? TIOCM_DTR : 0);
3518                 }
3519                 result |= ((status & CyDCD) ? TIOCM_CAR : 0) |
3520                         ((status & CyRI) ? TIOCM_RNG : 0) |
3521                         ((status & CyDSR) ? TIOCM_DSR : 0) |
3522                         ((status & CyCTS) ? TIOCM_CTS : 0);
3523         } else {
3524                 base_addr = card->base_addr;
3525                 firm_id = card->base_addr + ID_ADDRESS;
3526                 if (ISZLOADED(*card)) {
3527                         zfw_ctrl = card->base_addr +
3528                                 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3529                         board_ctrl = &zfw_ctrl->board_ctrl;
3530                         ch_ctrl = zfw_ctrl->ch_ctrl;
3531                         lstatus = readl(&ch_ctrl[channel].rs_status);
3532                         result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
3533                                 ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
3534                                 ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
3535                                 ((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
3536                                 ((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
3537                                 ((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
3538                 } else {
3539                         result = 0;
3540                         unlock_kernel();
3541                         return -ENODEV;
3542                 }
3543
3544         }
3545         unlock_kernel();
3546         return result;
3547 }                               /* cy_tiomget */
3548
3549 static int
3550 cy_tiocmset(struct tty_struct *tty, struct file *file,
3551                 unsigned int set, unsigned int clear)
3552 {
3553         struct cyclades_port *info = tty->driver_data;
3554         struct cyclades_card *card;
3555         int chip, channel, index;
3556         void __iomem *base_addr;
3557         unsigned long flags;
3558         struct FIRM_ID __iomem *firm_id;
3559         struct ZFW_CTRL __iomem *zfw_ctrl;
3560         struct BOARD_CTRL __iomem *board_ctrl;
3561         struct CH_CTRL __iomem *ch_ctrl;
3562         int retval;
3563
3564         if (serial_paranoia_check(info, tty->name, __func__))
3565                 return -ENODEV;
3566
3567         card = info->card;
3568         channel = (info->line) - (card->first_line);
3569         if (!IS_CYC_Z(*card)) {
3570                 chip = channel >> 2;
3571                 channel &= 0x03;
3572                 index = card->bus_index;
3573                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3574
3575                 if (set & TIOCM_RTS) {
3576                         spin_lock_irqsave(&card->card_lock, flags);
3577                         cy_writeb(base_addr + (CyCAR << index),
3578                                   (u_char) channel);
3579                         if (info->rtsdtr_inv) {
3580                                 cy_writeb(base_addr + (CyMSVR2 << index),
3581                                           CyDTR);
3582                         } else {
3583                                 cy_writeb(base_addr + (CyMSVR1 << index),
3584                                           CyRTS);
3585                         }
3586                         spin_unlock_irqrestore(&card->card_lock, flags);
3587                 }
3588                 if (clear & TIOCM_RTS) {
3589                         spin_lock_irqsave(&card->card_lock, flags);
3590                         cy_writeb(base_addr + (CyCAR << index),
3591                                   (u_char) channel);
3592                         if (info->rtsdtr_inv) {
3593                                 cy_writeb(base_addr + (CyMSVR2 << index),
3594                                           ~CyDTR);
3595                         } else {
3596                                 cy_writeb(base_addr + (CyMSVR1 << index),
3597                                           ~CyRTS);
3598                         }
3599                         spin_unlock_irqrestore(&card->card_lock, flags);
3600                 }
3601                 if (set & TIOCM_DTR) {
3602                         spin_lock_irqsave(&card->card_lock, flags);
3603                         cy_writeb(base_addr + (CyCAR << index),
3604                                   (u_char) channel);
3605                         if (info->rtsdtr_inv) {
3606                                 cy_writeb(base_addr + (CyMSVR1 << index),
3607                                           CyRTS);
3608                         } else {
3609                                 cy_writeb(base_addr + (CyMSVR2 << index),
3610                                           CyDTR);
3611                         }
3612 #ifdef CY_DEBUG_DTR
3613                         printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
3614                         printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
3615                                 readb(base_addr + (CyMSVR1 << index)),
3616                                 readb(base_addr + (CyMSVR2 << index)));
3617 #endif
3618                         spin_unlock_irqrestore(&card->card_lock, flags);
3619                 }
3620                 if (clear & TIOCM_DTR) {
3621                         spin_lock_irqsave(&card->card_lock, flags);
3622                         cy_writeb(base_addr + (CyCAR << index),
3623                                   (u_char) channel);
3624                         if (info->rtsdtr_inv) {
3625                                 cy_writeb(base_addr + (CyMSVR1 << index),
3626                                           ~CyRTS);
3627                         } else {
3628                                 cy_writeb(base_addr + (CyMSVR2 << index),
3629                                           ~CyDTR);
3630                         }
3631
3632 #ifdef CY_DEBUG_DTR
3633                         printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
3634                         printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
3635                                 readb(base_addr + (CyMSVR1 << index)),
3636                                 readb(base_addr + (CyMSVR2 << index)));
3637 #endif
3638                         spin_unlock_irqrestore(&card->card_lock, flags);
3639                 }
3640         } else {
3641                 base_addr = card->base_addr;
3642
3643                 firm_id = card->base_addr + ID_ADDRESS;
3644                 if (ISZLOADED(*card)) {
3645                         zfw_ctrl = card->base_addr +
3646                                 (readl(&firm_id->zfwctrl_addr) & 0xfffff);
3647                         board_ctrl = &zfw_ctrl->board_ctrl;
3648                         ch_ctrl = zfw_ctrl->ch_ctrl;
3649
3650                         if (set & TIOCM_RTS) {
3651                                 spin_lock_irqsave(&card->card_lock, flags);
3652                                 cy_writel(&ch_ctrl[channel].rs_control,
3653                                         readl(&ch_ctrl[channel].rs_control) |
3654                                         C_RS_RTS);
3655                                 spin_unlock_irqrestore(&card->card_lock, flags);
3656                         }
3657                         if (clear & TIOCM_RTS) {
3658                                 spin_lock_irqsave(&card->card_lock, flags);
3659                                 cy_writel(&ch_ctrl[channel].rs_control,
3660                                         readl(&ch_ctrl[channel].rs_control) &
3661                                         ~C_RS_RTS);
3662                                 spin_unlock_irqrestore(&card->card_lock, flags);
3663                         }
3664                         if (set & TIOCM_DTR) {
3665                                 spin_lock_irqsave(&card->card_lock, flags);
3666                                 cy_writel(&ch_ctrl[channel].rs_control,
3667                                         readl(&ch_ctrl[channel].rs_control) |
3668                                         C_RS_DTR);
3669 #ifdef CY_DEBUG_DTR
3670                                 printk(KERN_DEBUG "cyc:set_modem_info raising "
3671                                         "Z DTR\n");
3672 #endif
3673                                 spin_unlock_irqrestore(&card->card_lock, flags);
3674                         }
3675                         if (clear & TIOCM_DTR) {
3676                                 spin_lock_irqsave(&card->card_lock, flags);
3677                                 cy_writel(&ch_ctrl[channel].rs_control,
3678                                         readl(&ch_ctrl[channel].rs_control) &
3679                                         ~C_RS_DTR);
3680 #ifdef CY_DEBUG_DTR
3681                                 printk(KERN_DEBUG "cyc:set_modem_info clearing "
3682                                         "Z DTR\n");
3683 #endif
3684                                 spin_unlock_irqrestore(&card->card_lock, flags);
3685                         }
3686                 } else {
3687                         return -ENODEV;
3688                 }
3689                 spin_lock_irqsave(&card->card_lock, flags);
3690                 retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
3691                 if (retval != 0) {
3692                         printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
3693                                 "was %x\n", info->line, retval);
3694                 }
3695                 spin_unlock_irqrestore(&card->card_lock, flags);
3696         }
3697         return 0;
3698 }                               /* cy_tiocmset */
3699
3700 /*
3701  * cy_break() --- routine which turns the break handling on or off
3702  */
3703 static void cy_break(struct tty_struct *tty, int break_state)
3704 {
3705         struct cyclades_port *info = tty->driver_data;
3706         struct cyclades_card *card;
3707         unsigned long flags;
3708
3709         if (serial_paranoia_check(info, tty->name, "cy_break"))
3710                 return;
3711
3712         card = info->card;
3713
3714         spin_lock_irqsave(&card->card_lock, flags);
3715         if (!IS_CYC_Z(*card)) {
3716                 /* Let the transmit ISR take care of this (since it
3717                    requires stuffing characters into the output stream).
3718                  */
3719                 if (break_state == -1) {
3720                         if (!info->breakon) {
3721                                 info->breakon = 1;
3722                                 if (!info->xmit_cnt) {
3723                                         spin_unlock_irqrestore(&card->card_lock, flags);
3724                                         start_xmit(info);
3725                                         spin_lock_irqsave(&card->card_lock, flags);
3726                                 }
3727                         }
3728                 } else {
3729                         if (!info->breakoff) {
3730                                 info->breakoff = 1;
3731                                 if (!info->xmit_cnt) {
3732                                         spin_unlock_irqrestore(&card->card_lock, flags);
3733                                         start_xmit(info);
3734                                         spin_lock_irqsave(&card->card_lock, flags);
3735                                 }
3736                         }
3737                 }
3738         } else {
3739                 int retval;
3740
3741                 if (break_state == -1) {
3742                         retval = cyz_issue_cmd(card,
3743                                 info->line - card->first_line,
3744                                 C_CM_SET_BREAK, 0L);
3745                         if (retval != 0) {
3746                                 printk(KERN_ERR "cyc:cy_break (set) retval on "
3747                                         "ttyC%d was %x\n", info->line, retval);
3748                         }
3749                 } else {
3750                         retval = cyz_issue_cmd(card,
3751                                 info->line - card->first_line,
3752                                 C_CM_CLR_BREAK, 0L);
3753                         if (retval != 0) {
3754                                 printk(KERN_DEBUG "cyc:cy_break (clr) retval "
3755                                         "on ttyC%d was %x\n", info->line,
3756                                         retval);
3757                         }
3758                 }
3759         }
3760         spin_unlock_irqrestore(&card->card_lock, flags);
3761 }                               /* cy_break */
3762
3763 static int get_mon_info(struct cyclades_port *info,
3764                                 struct cyclades_monitor __user *mon)
3765 {
3766
3767         if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
3768                 return -EFAULT;
3769         info->mon.int_count = 0;
3770         info->mon.char_count = 0;
3771         info->mon.char_max = 0;
3772         info->mon.char_last = 0;
3773         return 0;
3774 }                               /* get_mon_info */
3775
3776 static int set_threshold(struct cyclades_port *info, unsigned long value)
3777 {
3778         struct cyclades_card *card;
3779         void __iomem *base_addr;
3780         int channel, chip, index;
3781         unsigned long flags;
3782
3783         card = info->card;
3784         channel = info->line - card->first_line;
3785         if (!IS_CYC_Z(*card)) {
3786                 chip = channel >> 2;
3787                 channel &= 0x03;
3788                 index = card->bus_index;
3789                 base_addr =
3790                     card->base_addr + (cy_chip_offset[chip] << index);
3791
3792                 info->cor3 &= ~CyREC_FIFO;
3793                 info->cor3 |= value & CyREC_FIFO;
3794
3795                 spin_lock_irqsave(&card->card_lock, flags);
3796                 cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
3797                 cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
3798                 spin_unlock_irqrestore(&card->card_lock, flags);
3799         }
3800         return 0;
3801 }                               /* set_threshold */
3802
3803 static int get_threshold(struct cyclades_port *info,
3804                                                 unsigned long __user *value)
3805 {
3806         struct cyclades_card *card;
3807         void __iomem *base_addr;
3808         int channel, chip, index;
3809         unsigned long tmp;
3810
3811         card = info->card;
3812         channel = info->line - card->first_line;
3813         if (!IS_CYC_Z(*card)) {
3814                 chip = channel >> 2;
3815                 channel &= 0x03;
3816                 index = card->bus_index;
3817                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3818
3819                 tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
3820                 return put_user(tmp, value);
3821         }
3822         return 0;
3823 }                               /* get_threshold */
3824
3825 static int set_default_threshold(struct cyclades_port *info,
3826                                                         unsigned long value)
3827 {
3828         info->default_threshold = value & 0x0f;
3829         return 0;
3830 }                               /* set_default_threshold */
3831
3832 static int get_default_threshold(struct cyclades_port *info,
3833                                                 unsigned long __user *value)
3834 {
3835         return put_user(info->default_threshold, value);
3836 }                               /* get_default_threshold */
3837
3838 static int set_timeout(struct cyclades_port *info, unsigned long value)
3839 {
3840         struct cyclades_card *card;
3841         void __iomem *base_addr;
3842         int channel, chip, index;
3843         unsigned long flags;
3844
3845         card = info->card;
3846         channel = info->line - card->first_line;
3847         if (!IS_CYC_Z(*card)) {
3848                 chip = channel >> 2;
3849                 channel &= 0x03;
3850                 index = card->bus_index;
3851                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3852
3853                 spin_lock_irqsave(&card->card_lock, flags);
3854                 cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
3855                 spin_unlock_irqrestore(&card->card_lock, flags);
3856         }
3857         return 0;
3858 }                               /* set_timeout */
3859
3860 static int get_timeout(struct cyclades_port *info,
3861                                                 unsigned long __user *value)
3862 {
3863         struct cyclades_card *card;
3864         void __iomem *base_addr;
3865         int channel, chip, index;
3866         unsigned long tmp;
3867
3868         card = info->card;
3869         channel = info->line - card->first_line;
3870         if (!IS_CYC_Z(*card)) {
3871                 chip = channel >> 2;
3872                 channel &= 0x03;
3873                 index = card->bus_index;
3874                 base_addr = card->base_addr + (cy_chip_offset[chip] << index);
3875
3876                 tmp = readb(base_addr + (CyRTPR << index));
3877                 return put_user(tmp, value);
3878         }
3879         return 0;
3880 }                               /* get_timeout */
3881
3882 static int set_default_timeout(struct cyclades_port *info, unsigned long value)
3883 {
3884         info->default_timeout = value & 0xff;
3885         return 0;
3886 }                               /* set_default_timeout */
3887
3888 static int get_default_timeout(struct cyclades_port *info,
3889                                         unsigned long __user *value)
3890 {
3891         return put_user(info->default_timeout, value);
3892 }                               /* get_default_timeout */
3893
3894 /*
3895  * This routine allows the tty driver to implement device-
3896  * specific ioctl's.  If the ioctl number passed in cmd is
3897  * not recognized by the driver, it should return ENOIOCTLCMD.
3898  */
3899 static int
3900 cy_ioctl(struct tty_struct *tty, struct file *file,
3901          unsigned int cmd, unsigned long arg)
3902 {
3903         struct cyclades_port *info = tty->driver_data;
3904         struct cyclades_icount cprev, cnow;     /* kernel counter temps */
3905         struct serial_icounter_struct __user *p_cuser;  /* user space */
3906         int ret_val = 0;
3907         unsigned long flags;
3908         void __user *argp = (void __user *)arg;
3909
3910         if (serial_paranoia_check(info, tty->name, "cy_ioctl"))
3911                 return -ENODEV;
3912
3913 #ifdef CY_DEBUG_OTHER
3914         printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
3915                 info->line, cmd, arg);
3916 #endif
3917         lock_kernel();
3918
3919         switch (cmd) {
3920         case CYGETMON:
3921                 ret_val = get_mon_info(info, argp);
3922                 break;
3923         case CYGETTHRESH:
3924                 ret_val = get_threshold(info, argp);
3925                 break;
3926         case CYSETTHRESH:
3927                 ret_val = set_threshold(info, arg);
3928                 break;
3929         case CYGETDEFTHRESH:
3930                 ret_val = get_default_threshold(info, argp);
3931                 break;
3932         case CYSETDEFTHRESH:
3933                 ret_val = set_default_threshold(info, arg);
3934                 break;
3935         case CYGETTIMEOUT:
3936                 ret_val = get_timeout(info, argp);
3937                 break;
3938         case CYSETTIMEOUT:
3939                 ret_val = set_timeout(info, arg);
3940                 break;
3941         case CYGETDEFTIMEOUT:
3942                 ret_val = get_default_timeout(info, argp);
3943                 break;
3944         case CYSETDEFTIMEOUT:
3945                 ret_val = set_default_timeout(info, arg);
3946                 break;
3947         case CYSETRFLOW:
3948                 info->rflow = (int)arg;
3949                 ret_val = 0;
3950                 break;
3951         case CYGETRFLOW:
3952                 ret_val = info->rflow;
3953                 break;
3954         case CYSETRTSDTR_INV:
3955                 info->rtsdtr_inv = (int)arg;
3956                 ret_val = 0;
3957                 break;
3958         case CYGETRTSDTR_INV:
3959                 ret_val = info->rtsdtr_inv;
3960                 break;
3961         case CYGETCD1400VER:
3962                 ret_val = info->chip_rev;
3963                 break;
3964 #ifndef CONFIG_CYZ_INTR
3965         case CYZSETPOLLCYCLE:
3966                 cyz_polling_cycle = (arg * HZ) / 1000;
3967                 ret_val = 0;
3968                 break;
3969         case CYZGETPOLLCYCLE:
3970                 ret_val = (cyz_polling_cycle * 1000) / HZ;
3971                 break;
3972 #endif                          /* CONFIG_CYZ_INTR */
3973         case CYSETWAIT:
3974                 info->closing_wait = (unsigned short)arg * HZ / 100;
3975                 ret_val = 0;
3976                 break;
3977         case CYGETWAIT:
3978                 ret_val = info->closing_wait / (HZ / 100);
3979                 break;
3980         case TIOCGSERIAL:
3981                 ret_val = get_serial_info(info, argp);
3982                 break;
3983         case TIOCSSERIAL:
3984                 ret_val = set_serial_info(info, argp);
3985                 break;
3986         case TIOCSERGETLSR:     /* Get line status register */
3987                 ret_val = get_lsr_info(info, argp);
3988                 break;
3989                 /*
3990                  * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
3991                  * - mask passed in arg for lines of interest
3992                  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
3993                  * Caller should use TIOCGICOUNT to see which one it was
3994                  */
3995         case TIOCMIWAIT:
3996                 spin_lock_irqsave(&info->card->card_lock, flags);
3997                 /* note the counters on entry */
3998                 cnow = info->icount;
3999                 spin_unlock_irqrestore(&info->card->card_lock, flags);
4000                 ret_val = wait_event_interruptible(info->delta_msr_wait, ({
4001                         cprev = cnow;
4002                         spin_lock_irqsave(&info->card->card_lock, flags);
4003                         cnow = info->icount;    /* atomic copy */
4004                         spin_unlock_irqrestore(&info->card->card_lock, flags);
4005
4006                         ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
4007                         ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
4008                         ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
4009                         ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
4010                 }));
4011                 break;
4012
4013                 /*
4014                  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
4015                  * Return: write counters to the user passed counter struct
4016                  * NB: both 1->0 and 0->1 transitions are counted except for
4017                  *     RI where only 0->1 is counted.
4018                  */
4019         case TIOCGICOUNT:
4020                 spin_lock_irqsave(&info->card->card_lock, flags);
4021                 cnow = info->icount;
4022                 spin_unlock_irqrestore(&info->card->card_lock, flags);
4023                 p_cuser = argp;
4024                 ret_val = put_user(cnow.cts, &p_cuser->cts);
4025                 if (ret_val)
4026                         break;
4027                 ret_val = put_user(cnow.dsr, &p_cuser->dsr);
4028                 if (ret_val)
4029                         break;
4030                 ret_val = put_user(cnow.rng, &p_cuser->rng);
4031                 if (ret_val)
4032                         break;
4033                 ret_val = put_user(cnow.dcd, &p_cuser->dcd);
4034                 if (ret_val)
4035                         break;
4036                 ret_val = put_user(cnow.rx, &p_cuser->rx);
4037                 if (ret_val)
4038                         break;
4039                 ret_val = put_user(cnow.tx, &p_cuser->tx);
4040                 if (ret_val)
4041                         break;
4042                 ret_val = put_user(cnow.frame, &p_cuser->frame);
4043                 if (ret_val)
4044                         break;
4045                 ret_val = put_user(cnow.overrun, &p_cuser->overrun);
4046                 if (ret_val)
4047                         break;
4048                 ret_val = put_user(cnow.parity, &p_cuser->parity);
4049                 if (ret_val)
4050                         break;
4051                 ret_val = put_user(cnow.brk, &p_cuser->brk);
4052                 if (ret_val)
4053                         break;
4054                 ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
4055                 if (ret_val)
4056                         break;
4057                 ret_val = 0;
4058                 break;
4059         default:
4060                 ret_val = -ENOIOCTLCMD;
4061         }
4062         unlock_kernel();
4063
4064 #ifdef CY_DEBUG_OTHER
4065         printk(KERN_DEBUG "cyc:cy_ioctl done\n");
4066 #endif
4067         return ret_val;
4068 }                               /* cy_ioctl */
4069
4070 /*
4071  * This routine allows the tty driver to be notified when
4072  * device's termios settings have changed.  Note that a
4073  * well-designed tty driver should be prepared to accept the case
4074  * where old == NULL, and try to do something rational.
4075  */
4076 static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
4077 {
4078         struct cyclades_port *info = tty->driver_data;
4079
4080 #ifdef CY_DEBUG_OTHER
4081         printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
4082 #endif
4083
4084         set_line_char(info);
4085
4086         if ((old_termios->c_cflag & CRTSCTS) &&
4087                         !(tty->termios->c_cflag & CRTSCTS)) {
4088                 tty->hw_stopped = 0;
4089                 cy_start(tty);
4090         }
4091 #if 0
4092         /*
4093          * No need to wake up processes in open wait, since they
4094          * sample the CLOCAL flag once, and don't recheck it.
4095          * XXX  It's not clear whether the current behavior is correct
4096          * or not.  Hence, this may change.....
4097          */
4098         if (!(old_termios->c_cflag & CLOCAL) &&
4099             (tty->termios->c_cflag & CLOCAL))
4100                 wake_up_interruptible(&info->open_wait);
4101 #endif
4102 }                               /* cy_set_termios */
4103
4104 /* This function is used to send a high-priority XON/XOFF character to
4105    the device.
4106 */
4107 static void cy_send_xchar(struct tty_struct *tty, char ch)
4108 {
4109         struct cyclades_port *info = tty->driver_data;
4110         struct cyclades_card *card;
4111         int channel;
4112
4113         if (serial_paranoia_check(info, tty->name, "cy_send_xchar"))
4114                 return;
4115
4116         info->x_char = ch;
4117
4118         if (ch)
4119                 cy_start(tty);
4120
4121         card = info->card;
4122         channel = info->line - card->first_line;
4123
4124         if (IS_CYC_Z(*card)) {
4125                 if (ch == STOP_CHAR(tty))
4126                         cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
4127                 else if (ch == START_CHAR(tty))
4128                         cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L);
4129         }
4130 }
4131
4132 /* This routine is called by the upper-layer tty layer to signal
4133    that incoming characters should be throttled because the input
4134    buffers are close to full.
4135  */
4136 static void cy_throttle(struct tty_struct *tty)
4137 {
4138         struct cyclades_port *info = tty->driver_data;
4139         struct cyclades_card *card;
4140         unsigned long flags;
4141         void __iomem *base_addr;
4142         int chip, channel, index;
4143
4144 #ifdef CY_DEBUG_THROTTLE
4145         char buf[64];
4146
4147         printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf),
4148                         tty->ldisc.chars_in_buffer(tty), info->line);
4149 #endif
4150
4151         if (serial_paranoia_check(info, tty->name, "cy_throttle"))
4152                 return;
4153
4154         card = info->card;
4155
4156         if (I_IXOFF(tty)) {
4157                 if (!IS_CYC_Z(*card))
4158                         cy_send_xchar(tty, STOP_CHAR(tty));
4159                 else
4160                         info->throttle = 1;
4161         }
4162
4163         if (tty->termios->c_cflag & CRTSCTS) {
4164                 channel = info->line - card->first_line;
4165                 if (!IS_CYC_Z(*card)) {
4166                         chip = channel >> 2;
4167                         channel &= 0x03;
4168                         index = card->bus_index;
4169                         base_addr = card->base_addr +
4170                                 (cy_chip_offset[chip] << index);
4171
4172                         spin_lock_irqsave(&card->card_lock, flags);
4173                         cy_writeb(base_addr + (CyCAR << index),
4174                                   (u_char) channel);
4175                         if (info->rtsdtr_inv) {
4176                                 cy_writeb(base_addr + (CyMSVR2 << index),
4177                                           ~CyDTR);
4178                         } else {
4179                                 cy_writeb(base_addr + (CyMSVR1 << index),
4180                                           ~CyRTS);
4181                         }
4182                         spin_unlock_irqrestore(&card->card_lock, flags);
4183                 } else {
4184                         info->throttle = 1;
4185                 }
4186         }
4187 }                               /* cy_throttle */
4188
4189 /*
4190  * This routine notifies the tty driver that it should signal
4191  * that characters can now be sent to the tty without fear of
4192  * overrunning the input buffers of the line disciplines.
4193  */
4194 static void cy_unthrottle(struct tty_struct *tty)
4195 {
4196         struct cyclades_port *info = tty->driver_data;
4197         struct cyclades_card *card;
4198         unsigned long flags;
4199         void __iomem *base_addr;
4200         int chip, channel, index;
4201
4202 #ifdef CY_DEBUG_THROTTLE
4203         char buf[64];
4204
4205         printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
4206                 tty_name(tty, buf), tty_chars_in_buffer(tty), info->line);
4207 #endif
4208
4209         if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
4210                 return;
4211
4212         if (I_IXOFF(tty)) {
4213                 if (info->x_char)
4214                         info->x_char = 0;
4215                 else
4216                         cy_send_xchar(tty, START_CHAR(tty));
4217         }
4218
4219         if (tty->termios->c_cflag & CRTSCTS) {
4220                 card = info->card;
4221                 channel = info->line - card->first_line;
4222                 if (!IS_CYC_Z(*card)) {
4223                         chip = channel >> 2;
4224                         channel &= 0x03;
4225                         index = card->bus_index;
4226                         base_addr = card->base_addr +
4227                                 (cy_chip_offset[chip] << index);
4228
4229                         spin_lock_irqsave(&card->card_lock, flags);
4230                         cy_writeb(base_addr + (CyCAR << index),
4231                                   (u_char) channel);
4232                         if (info->rtsdtr_inv) {
4233                                 cy_writeb(base_addr + (CyMSVR2 << index),
4234                                           CyDTR);
4235                         } else {
4236                                 cy_writeb(base_addr + (CyMSVR1 << index),
4237                                           CyRTS);
4238                         }
4239                         spin_unlock_irqrestore(&card->card_lock, flags);
4240                 } else {
4241                         info->throttle = 0;
4242                 }
4243         }
4244 }                               /* cy_unthrottle */
4245
4246 /* cy_start and cy_stop provide software output flow control as a
4247    function of XON/XOFF, software CTS, and other such stuff.
4248 */
4249 static void cy_stop(struct tty_struct *tty)
4250 {
4251         struct cyclades_card *cinfo;
4252         struct cyclades_port *info = tty->driver_data;
4253         void __iomem *base_addr;
4254         int chip, channel, index;
4255         unsigned long flags;
4256
4257 #ifdef CY_DEBUG_OTHER
4258         printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line);
4259 #endif
4260
4261         if (serial_paranoia_check(info, tty->name, "cy_stop"))
4262                 return;
4263
4264         cinfo = info->card;
4265         channel = info->line - cinfo->first_line;
4266         if (!IS_CYC_Z(*cinfo)) {
4267                 index = cinfo->bus_index;
4268                 chip = channel >> 2;
4269                 channel &= 0x03;
4270                 base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
4271
4272                 spin_lock_irqsave(&cinfo->card_lock, flags);
4273                 cy_writeb(base_addr + (CyCAR << index),
4274                         (u_char)(channel & 0x0003)); /* index channel */
4275                 cy_writeb(base_addr + (CySRER << index),
4276                           readb(base_addr + (CySRER << index)) & ~CyTxRdy);
4277                 spin_unlock_irqrestore(&cinfo->card_lock, flags);
4278         }
4279 }                               /* cy_stop */
4280
4281 static void cy_start(struct tty_struct *tty)
4282 {
4283         struct cyclades_card *cinfo;
4284         struct cyclades_port *info = tty->driver_data;
4285         void __iomem *base_addr;
4286         int chip, channel, index;
4287         unsigned long flags;
4288
4289 #ifdef CY_DEBUG_OTHER
4290         printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line);
4291 #endif
4292
4293         if (serial_paranoia_check(info, tty->name, "cy_start"))
4294                 return;
4295
4296         cinfo = info->card;
4297         channel = info->line - cinfo->first_line;
4298         index = cinfo->bus_index;
4299         if (!IS_CYC_Z(*cinfo)) {
4300                 chip = channel >> 2;
4301                 channel &= 0x03;
4302                 base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
4303
4304                 spin_lock_irqsave(&cinfo->card_lock, flags);
4305                 cy_writeb(base_addr + (CyCAR << index),
4306                         (u_char) (channel & 0x0003));   /* index channel */
4307                 cy_writeb(base_addr + (CySRER << index),
4308                           readb(base_addr + (CySRER << index)) | CyTxRdy);
4309                 spin_unlock_irqrestore(&cinfo->card_lock, flags);
4310         }
4311 }                               /* cy_start */
4312
4313 /*
4314  * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
4315  */
4316 static void cy_hangup(struct tty_struct *tty)
4317 {
4318         struct cyclades_port *info = tty->driver_data;
4319
4320 #ifdef CY_DEBUG_OTHER
4321         printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line);
4322 #endif
4323
4324         if (serial_paranoia_check(info, tty->name, "cy_hangup"))
4325                 return;
4326
4327         cy_flush_buffer(tty);
4328         shutdown(info);
4329         info->count = 0;
4330 #ifdef CY_DEBUG_COUNT
4331         printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
4332                 current->pid);
4333 #endif
4334         info->tty = NULL;
4335         info->flags &= ~ASYNC_NORMAL_ACTIVE;
4336         wake_up_interruptible(&info->open_wait);
4337 }                               /* cy_hangup */
4338
4339 /*
4340  * ---------------------------------------------------------------------
4341  * cy_init() and friends
4342  *
4343  * cy_init() is called at boot-time to initialize the serial driver.
4344  * ---------------------------------------------------------------------
4345  */
4346
4347 static int __devinit cy_init_card(struct cyclades_card *cinfo)
4348 {
4349         struct cyclades_port *info;
4350         u32 uninitialized_var(mailbox);
4351         unsigned int nports, port;
4352         unsigned short chip_number;
4353         int uninitialized_var(index);
4354
4355         spin_lock_init(&cinfo->card_lock);
4356
4357         if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */
4358                 mailbox = readl(&((struct RUNTIME_9060 __iomem *)
4359                                      cinfo->ctl_addr)->mail_box_0);
4360                 nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
4361                 cinfo->intr_enabled = 0;
4362                 cinfo->nports = 0;      /* Will be correctly set later, after
4363                                            Z FW is loaded */
4364         } else {
4365                 index = cinfo->bus_index;
4366                 nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
4367         }
4368
4369         cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL);
4370         if (cinfo->ports == NULL) {
4371                 printk(KERN_ERR "Cyclades: cannot allocate ports\n");
4372                 cinfo->nports = 0;
4373                 return -ENOMEM;
4374         }
4375
4376         for (port = cinfo->first_line; port < cinfo->first_line + nports;
4377                         port++) {
4378                 info = &cinfo->ports[port - cinfo->first_line];
4379                 info->magic = CYCLADES_MAGIC;
4380                 info->card = cinfo;
4381                 info->line = port;
4382                 info->flags = STD_COM_FLAGS;
4383                 info->closing_wait = CLOSING_WAIT_DELAY;
4384                 info->close_delay = 5 * HZ / 10;
4385
4386                 init_waitqueue_head(&info->open_wait);
4387                 init_waitqueue_head(&info->close_wait);
4388                 init_completion(&info->shutdown_wait);
4389                 init_waitqueue_head(&info->delta_msr_wait);
4390
4391                 if (IS_CYC_Z(*cinfo)) {
4392                         info->type = PORT_STARTECH;
4393                         if (mailbox == ZO_V1)
4394                                 info->xmit_fifo_size = CYZ_FIFO_SIZE;
4395                         else
4396                                 info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
4397 #ifdef CONFIG_CYZ_INTR
4398                         setup_timer(&cyz_rx_full_timer[port],
4399                                 cyz_rx_restart, (unsigned long)info);
4400 #endif
4401                 } else {
4402                         info->type = PORT_CIRRUS;
4403                         info->xmit_fifo_size = CyMAX_CHAR_FIFO;
4404                         info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
4405                         info->cor2 = CyETC;
4406                         info->cor3 = 0x08;      /* _very_ small rcv threshold */
4407
4408                         chip_number = (port - cinfo->first_line) / 4;
4409                         info->chip_rev = readb(cinfo->base_addr +
4410                                       (cy_chip_offset[chip_number] << index) +
4411                                       (CyGFRCR << index));
4412
4413                         if (info->chip_rev >= CD1400_REV_J) {
4414                                 /* It is a CD1400 rev. J or later */
4415                                 info->tbpr = baud_bpr_60[13];   /* Tx BPR */
4416                                 info->tco = baud_co_60[13];     /* Tx CO */
4417                                 info->rbpr = baud_bpr_60[13];   /* Rx BPR */
4418                                 info->rco = baud_co_60[13];     /* Rx CO */
4419                                 info->rtsdtr_inv = 1;
4420                         } else {
4421                                 info->tbpr = baud_bpr_25[13];   /* Tx BPR */
4422                                 info->tco = baud_co_25[13];     /* Tx CO */
4423                                 info->rbpr = baud_bpr_25[13];   /* Rx BPR */
4424                                 info->rco = baud_co_25[13];     /* Rx CO */
4425                                 info->rtsdtr_inv = 0;
4426                         }
4427                         info->read_status_mask = CyTIMEOUT | CySPECHAR |
4428                                 CyBREAK | CyPARITY | CyFRAME | CyOVERRUN;
4429                 }
4430
4431         }
4432
4433 #ifndef CONFIG_CYZ_INTR
4434         if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) {
4435                 mod_timer(&cyz_timerlist, jiffies + 1);
4436 #ifdef CY_PCI_DEBUG
4437                 printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
4438 #endif
4439         }
4440 #endif
4441         return 0;
4442 }
4443
4444 /* initialize chips on Cyclom-Y card -- return number of valid
4445    chips (which is number of ports/4) */
4446 static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr,
4447                 int index)
4448 {
4449         unsigned int chip_number;
4450         void __iomem *base_addr;
4451
4452         cy_writeb(true_base_addr + (Cy_HwReset << index), 0);
4453         /* Cy_HwReset is 0x1400 */
4454         cy_writeb(true_base_addr + (Cy_ClrIntr << index), 0);
4455         /* Cy_ClrIntr is 0x1800 */
4456         udelay(500L);
4457
4458         for (chip_number = 0; chip_number < CyMAX_CHIPS_PER_CARD;
4459                                                         chip_number++) {
4460                 base_addr =
4461                     true_base_addr + (cy_chip_offset[chip_number] << index);
4462                 mdelay(1);
4463                 if (readb(base_addr + (CyCCR << index)) != 0x00) {
4464                         /*************
4465                         printk(" chip #%d at %#6lx is never idle (CCR != 0)\n",
4466                         chip_number, (unsigned long)base_addr);
4467                         *************/
4468                         return chip_number;
4469                 }
4470
4471                 cy_writeb(base_addr + (CyGFRCR << index), 0);
4472                 udelay(10L);
4473
4474                 /* The Cyclom-16Y does not decode address bit 9 and therefore
4475                    cannot distinguish between references to chip 0 and a non-
4476                    existent chip 4.  If the preceding clearing of the supposed
4477                    chip 4 GFRCR register appears at chip 0, there is no chip 4
4478                    and this must be a Cyclom-16Y, not a Cyclom-32Ye.
4479                  */
4480                 if (chip_number == 4 && readb(true_base_addr +
4481                                 (cy_chip_offset[0] << index) +
4482                                 (CyGFRCR << index)) == 0) {
4483                         return chip_number;
4484                 }
4485
4486                 cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET);
4487                 mdelay(1);
4488
4489                 if (readb(base_addr + (CyGFRCR << index)) == 0x00) {
4490                         /*
4491                            printk(" chip #%d at %#6lx is not responding ",
4492                            chip_number, (unsigned long)base_addr);
4493                            printk("(GFRCR stayed 0)\n",
4494                          */
4495                         return chip_number;
4496                 }
4497                 if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) !=
4498                                 0x40) {
4499                         /*
4500                         printk(" chip #%d at %#6lx is not valid (GFRCR == "
4501                                         "%#2x)\n",
4502                                         chip_number, (unsigned long)base_addr,
4503                                         base_addr[CyGFRCR<<index]);
4504                          */
4505                         return chip_number;
4506                 }
4507                 cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL);
4508                 if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) {
4509                         /* It is a CD1400 rev. J or later */
4510                         /* Impossible to reach 5ms with this chip.
4511                            Changed to 2ms instead (f = 500 Hz). */
4512                         cy_writeb(base_addr + (CyPPR << index), CyCLOCK_60_2MS);
4513                 } else {
4514                         /* f = 200 Hz */
4515                         cy_writeb(base_addr + (CyPPR << index), CyCLOCK_25_5MS);
4516                 }
4517
4518                 /*
4519                    printk(" chip #%d at %#6lx is rev 0x%2x\n",
4520                    chip_number, (unsigned long)base_addr,
4521                    readb(base_addr+(CyGFRCR<<index)));
4522                  */
4523         }
4524         return chip_number;
4525 }                               /* cyy_init_card */
4526
4527 /*
4528  * ---------------------------------------------------------------------
4529  * cy_detect_isa() - Probe for Cyclom-Y/ISA boards.
4530  * sets global variables and return the number of ISA boards found.
4531  * ---------------------------------------------------------------------
4532  */
4533 static int __init cy_detect_isa(void)
4534 {
4535 #ifdef CONFIG_ISA
4536         unsigned short cy_isa_irq, nboard;
4537         void __iomem *cy_isa_address;
4538         unsigned short i, j, cy_isa_nchan;
4539 #ifdef MODULE
4540         int isparam = 0;
4541 #endif
4542
4543         nboard = 0;
4544
4545 #ifdef MODULE
4546         /* Check for module parameters */
4547         for (i = 0; i < NR_CARDS; i++) {
4548                 if (maddr[i] || i) {
4549                         isparam = 1;
4550                         cy_isa_addresses[i] = maddr[i];
4551                 }
4552                 if (!maddr[i])
4553                         break;
4554         }
4555 #endif
4556
4557         /* scan the address table probing for Cyclom-Y/ISA boards */
4558         for (i = 0; i < NR_ISA_ADDRS; i++) {
4559                 unsigned int isa_address = cy_isa_addresses[i];
4560                 if (isa_address == 0x0000)
4561                         return nboard;
4562
4563                 /* probe for CD1400... */
4564                 cy_isa_address = ioremap_nocache(isa_address, CyISA_Ywin);
4565                 if (cy_isa_address == NULL) {
4566                         printk(KERN_ERR "Cyclom-Y/ISA: can't remap base "
4567                                         "address\n");
4568                         continue;
4569                 }
4570                 cy_isa_nchan = CyPORTS_PER_CHIP *
4571                         cyy_init_card(cy_isa_address, 0);
4572                 if (cy_isa_nchan == 0) {
4573                         iounmap(cy_isa_address);
4574                         continue;
4575                 }
4576 #ifdef MODULE
4577                 if (isparam && irq[i])
4578                         cy_isa_irq = irq[i];
4579                 else
4580 #endif
4581                         /* find out the board's irq by probing */
4582                         cy_isa_irq = detect_isa_irq(cy_isa_address);
4583                 if (cy_isa_irq == 0) {
4584                         printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the "
4585                                 "IRQ could not be detected.\n",
4586                                 (unsigned long)cy_isa_address);
4587                         iounmap(cy_isa_address);
4588                         continue;
4589                 }
4590
4591                 if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) {
4592                         printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
4593                                 "more channels are available. Change NR_PORTS "
4594                                 "in cyclades.c and recompile kernel.\n",
4595                                 (unsigned long)cy_isa_address);
4596                         iounmap(cy_isa_address);
4597                         return nboard;
4598                 }
4599                 /* fill the next cy_card structure available */
4600                 for (j = 0; j < NR_CARDS; j++) {
4601                         if (cy_card[j].base_addr == NULL)
4602                                 break;
4603                 }
4604                 if (j == NR_CARDS) {    /* no more cy_cards available */
4605                         printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
4606                                 "more cards can be used. Change NR_CARDS in "
4607                                 "cyclades.c and recompile kernel.\n",
4608                                 (unsigned long)cy_isa_address);
4609                         iounmap(cy_isa_address);
4610                         return nboard;
4611                 }
4612
4613                 /* allocate IRQ */
4614                 if (request_irq(cy_isa_irq, cyy_interrupt,
4615                                 IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) {
4616                         printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
4617                                 "could not allocate IRQ#%d.\n",
4618                                 (unsigned long)cy_isa_address, cy_isa_irq);
4619                         iounmap(cy_isa_address);
4620                         return nboard;
4621                 }
4622
4623                 /* set cy_card */
4624                 cy_card[j].base_addr = cy_isa_address;
4625                 cy_card[j].ctl_addr = NULL;
4626                 cy_card[j].irq = (int)cy_isa_irq;
4627                 cy_card[j].bus_index = 0;
4628                 cy_card[j].first_line = cy_next_channel;
4629                 cy_card[j].num_chips = cy_isa_nchan / 4;
4630                 if (cy_init_card(&cy_card[j])) {
4631                         cy_card[j].base_addr = NULL;
4632                         free_irq(cy_isa_irq, &cy_card[j]);
4633                         iounmap(cy_isa_address);
4634                         continue;
4635                 }
4636                 nboard++;
4637
4638                 printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: "
4639                         "%d channels starting from port %d\n",
4640                         j + 1, (unsigned long)cy_isa_address,
4641                         (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
4642                         cy_isa_irq, cy_isa_nchan, cy_next_channel);
4643
4644                 for (j = cy_next_channel;
4645                                 j < cy_next_channel + cy_isa_nchan; j++)
4646                         tty_register_device(cy_serial_driver, j, NULL);
4647                 cy_next_channel += cy_isa_nchan;
4648         }
4649         return nboard;
4650 #else
4651         return 0;
4652 #endif                          /* CONFIG_ISA */
4653 }                               /* cy_detect_isa */
4654
4655 #ifdef CONFIG_PCI
4656 static inline int __devinit cyc_isfwstr(const char *str, unsigned int size)
4657 {
4658         unsigned int a;
4659
4660         for (a = 0; a < size && *str; a++, str++)
4661                 if (*str & 0x80)
4662                         return -EINVAL;
4663
4664         for (; a < size; a++, str++)
4665                 if (*str)
4666                         return -EINVAL;
4667
4668         return 0;
4669 }
4670
4671 static inline void __devinit cyz_fpga_copy(void __iomem *fpga, u8 *data,
4672                 unsigned int size)
4673 {
4674         for (; size > 0; size--) {
4675                 cy_writel(fpga, *data++);
4676                 udelay(10);
4677         }
4678 }
4679
4680 static void __devinit plx_init(struct pci_dev *pdev, int irq,
4681                 struct RUNTIME_9060 __iomem *addr)
4682 {
4683         /* Reset PLX */
4684         cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x40000000);
4685         udelay(100L);
4686         cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x40000000);
4687
4688         /* Reload Config. Registers from EEPROM */
4689         cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) | 0x20000000);
4690         udelay(100L);
4691         cy_writel(&addr->init_ctrl, readl(&addr->init_ctrl) & ~0x20000000);
4692
4693         /* For some yet unknown reason, once the PLX9060 reloads the EEPROM,
4694          * the IRQ is lost and, thus, we have to re-write it to the PCI config.
4695          * registers. This will remain here until we find a permanent fix.
4696          */
4697         pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq);
4698 }
4699
4700 static int __devinit __cyz_load_fw(const struct firmware *fw,
4701                 const char *name, const u32 mailbox, void __iomem *base,
4702                 void __iomem *fpga)
4703 {
4704         void *ptr = fw->data;
4705         struct zfile_header *h = ptr;
4706         struct zfile_config *c, *cs;
4707         struct zfile_block *b, *bs;
4708         unsigned int a, tmp, len = fw->size;
4709 #define BAD_FW KERN_ERR "Bad firmware: "
4710         if (len < sizeof(*h)) {
4711                 printk(BAD_FW "too short: %u<%zu\n", len, sizeof(*h));
4712                 return -EINVAL;
4713         }
4714
4715         cs = ptr + h->config_offset;
4716         bs = ptr + h->block_offset;
4717
4718         if ((void *)(cs + h->n_config) > ptr + len ||
4719                         (void *)(bs + h->n_blocks) > ptr + len) {
4720                 printk(BAD_FW "too short");
4721                 return  -EINVAL;
4722         }
4723
4724         if (cyc_isfwstr(h->name, sizeof(h->name)) ||
4725                         cyc_isfwstr(h->date, sizeof(h->date))) {
4726                 printk(BAD_FW "bad formatted header string\n");
4727                 return -EINVAL;
4728         }
4729
4730         if (strncmp(name, h->name, sizeof(h->name))) {
4731                 printk(BAD_FW "bad name '%s' (expected '%s')\n", h->name, name);
4732                 return -EINVAL;
4733         }
4734
4735         tmp = 0;
4736         for (c = cs; c < cs + h->n_config; c++) {
4737                 for (a = 0; a < c->n_blocks; a++)
4738                         if (c->block_list[a] > h->n_blocks) {
4739                                 printk(BAD_FW "bad block ref number in cfgs\n");
4740                                 return -EINVAL;
4741                         }
4742                 if (c->mailbox == mailbox && c->function == 0) /* 0 is normal */
4743                         tmp++;
4744         }
4745         if (!tmp) {
4746                 printk(BAD_FW "nothing appropriate\n");
4747                 return -EINVAL;
4748         }
4749
4750         for (b = bs; b < bs + h->n_blocks; b++)
4751                 if (b->file_offset + b->size > len) {
4752                         printk(BAD_FW "bad block data offset\n");
4753                         return -EINVAL;
4754                 }
4755
4756         /* everything is OK, let's seek'n'load it */
4757         for (c = cs; c < cs + h->n_config; c++)
4758                 if (c->mailbox == mailbox && c->function == 0)
4759                         break;
4760
4761         for (a = 0; a < c->n_blocks; a++) {
4762                 b = &bs[c->block_list[a]];
4763                 if (b->type == ZBLOCK_FPGA) {
4764                         if (fpga != NULL)
4765                                 cyz_fpga_copy(fpga, ptr + b->file_offset,
4766                                                 b->size);
4767                 } else {
4768                         if (base != NULL)
4769                                 memcpy_toio(base + b->ram_offset,
4770                                                ptr + b->file_offset, b->size);
4771                 }
4772         }
4773 #undef BAD_FW
4774         return 0;
4775 }
4776
4777 static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
4778                 struct RUNTIME_9060 __iomem *ctl_addr, int irq)
4779 {
4780         const struct firmware *fw;
4781         struct FIRM_ID __iomem *fid = base_addr + ID_ADDRESS;
4782         struct CUSTOM_REG __iomem *cust = base_addr;
4783         struct ZFW_CTRL __iomem *pt_zfwctrl;
4784         void __iomem *tmp;
4785         u32 mailbox, status;
4786         unsigned int i;
4787         int retval;
4788
4789         retval = request_firmware(&fw, "cyzfirm.bin", &pdev->dev);
4790         if (retval) {
4791                 dev_err(&pdev->dev, "can't get firmware\n");
4792                 goto err;
4793         }
4794
4795         /* Check whether the firmware is already loaded and running. If
4796            positive, skip this board */
4797         if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
4798                 u32 cntval = readl(base_addr + 0x190);
4799
4800                 udelay(100);
4801                 if (cntval != readl(base_addr + 0x190)) {
4802                         /* FW counter is working, FW is running */
4803                         dev_dbg(&pdev->dev, "Cyclades-Z FW already loaded. "
4804                                         "Skipping board.\n");
4805                         retval = 0;
4806                         goto err_rel;
4807                 }
4808         }
4809
4810         /* start boot */
4811         cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) &
4812                         ~0x00030800UL);
4813
4814         mailbox = readl(&ctl_addr->mail_box_0);
4815
4816         if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) {
4817                 /* stops CPU and set window to beginning of RAM */
4818                 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
4819                 cy_writel(&cust->cpu_stop, 0);
4820                 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
4821                 udelay(100);
4822         }
4823
4824         plx_init(pdev, irq, ctl_addr);
4825
4826         if (mailbox != 0) {
4827                 /* load FPGA */
4828                 retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, NULL,
4829                                 base_addr);
4830                 if (retval)
4831                         goto err_rel;
4832                 if (!Z_FPGA_LOADED(ctl_addr)) {
4833                         dev_err(&pdev->dev, "fw upload successful, but fw is "
4834                                         "not loaded\n");
4835                         goto err_rel;
4836                 }
4837         }
4838
4839         /* stops CPU and set window to beginning of RAM */
4840         cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
4841         cy_writel(&cust->cpu_stop, 0);
4842         cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
4843         udelay(100);
4844
4845         /* clear memory */
4846         for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
4847                 cy_writeb(tmp, 255);
4848         if (mailbox != 0) {
4849                 /* set window to last 512K of RAM */
4850                 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM + RAM_SIZE);
4851                 for (tmp = base_addr; tmp < base_addr + RAM_SIZE; tmp++)
4852                         cy_writeb(tmp, 255);
4853                 /* set window to beginning of RAM */
4854                 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
4855         }
4856
4857         retval = __cyz_load_fw(fw, "Cyclom-Z", mailbox, base_addr, NULL);
4858         release_firmware(fw);
4859         if (retval)
4860                 goto err;
4861
4862         /* finish boot and start boards */
4863         cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
4864         cy_writel(&cust->cpu_start, 0);
4865         cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
4866         i = 0;
4867         while ((status = readl(&fid->signature)) != ZFIRM_ID && i++ < 40)
4868                 msleep(100);
4869         if (status != ZFIRM_ID) {
4870                 if (status == ZFIRM_HLT) {
4871                         dev_err(&pdev->dev, "you need an external power supply "
4872                                 "for this number of ports. Firmware halted and "
4873                                 "board reset.\n");
4874                         retval = -EIO;
4875                         goto err;
4876                 }
4877                 dev_warn(&pdev->dev, "fid->signature = 0x%x... Waiting "
4878                                 "some more time\n", status);
4879                 while ((status = readl(&fid->signature)) != ZFIRM_ID &&
4880                                 i++ < 200)
4881                         msleep(100);
4882                 if (status != ZFIRM_ID) {
4883                         dev_err(&pdev->dev, "Board not started in 20 seconds! "
4884                                         "Giving up. (fid->signature = 0x%x)\n",
4885                                         status);
4886                         dev_info(&pdev->dev, "*** Warning ***: if you are "
4887                                 "upgrading the FW, please power cycle the "
4888                                 "system before loading the new FW to the "
4889                                 "Cyclades-Z.\n");
4890
4891                         if (Z_FPGA_LOADED(ctl_addr))
4892                                 plx_init(pdev, irq, ctl_addr);
4893
4894                         retval = -EIO;
4895                         goto err;
4896                 }
4897                 dev_dbg(&pdev->dev, "Firmware started after %d seconds.\n",
4898                                 i / 10);
4899         }
4900         pt_zfwctrl = base_addr + readl(&fid->zfwctrl_addr);
4901
4902         dev_dbg(&pdev->dev, "fid=> %p, zfwctrl_addr=> %x, npt_zfwctrl=> %p\n",
4903                         base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
4904                         base_addr + readl(&fid->zfwctrl_addr));
4905
4906         dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
4907                 readl(&pt_zfwctrl->board_ctrl.fw_version),
4908                 readl(&pt_zfwctrl->board_ctrl.n_channel));
4909
4910         if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) {
4911                 dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
4912                         "check the connection between the Z host card and the "
4913                         "serial expanders.\n");
4914
4915                 if (Z_FPGA_LOADED(ctl_addr))
4916                         plx_init(pdev, irq, ctl_addr);
4917
4918                 dev_info(&pdev->dev, "Null number of ports detected. Board "
4919                                 "reset.\n");
4920                 retval = 0;
4921                 goto err;
4922         }
4923
4924         cy_writel(&pt_zfwctrl->board_ctrl.op_system, C_OS_LINUX);
4925         cy_writel(&pt_zfwctrl->board_ctrl.dr_version, DRIVER_VERSION);
4926
4927         /*
4928            Early firmware failed to start looking for commands.
4929            This enables firmware interrupts for those commands.
4930          */
4931         cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
4932                         (1 << 17));
4933         cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
4934                         0x00030800UL);
4935
4936         plx_init(pdev, irq, ctl_addr);
4937
4938         return 0;
4939 err_rel:
4940         release_firmware(fw);
4941 err:
4942         return retval;
4943 }
4944
4945 static int __devinit cy_pci_probe(struct pci_dev *pdev,
4946                 const struct pci_device_id *ent)
4947 {
4948         void __iomem *addr0 = NULL, *addr2 = NULL;
4949         char *card_name = NULL;
4950         u32 mailbox;
4951         unsigned int device_id, nchan = 0, card_no, i;
4952         unsigned char plx_ver;
4953         int retval, irq;
4954
4955         retval = pci_enable_device(pdev);
4956         if (retval) {
4957                 dev_err(&pdev->dev, "cannot enable device\n");
4958                 goto err;
4959         }
4960
4961         /* read PCI configuration area */
4962         irq = pdev->irq;
4963         device_id = pdev->device & ~PCI_DEVICE_ID_MASK;
4964
4965 #if defined(__alpha__)
4966         if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) {   /* below 1M? */
4967                 dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low "
4968                         "addresses on Alpha systems.\n");
4969                 retval = -EIO;
4970                 goto err_dis;
4971         }
4972 #endif
4973         if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) {
4974                 dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low "
4975                         "addresses\n");
4976                 retval = -EIO;
4977                 goto err_dis;
4978         }
4979
4980         if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
4981                 dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring "
4982                                 "it...\n");
4983                 pdev->resource[2].flags &= ~IORESOURCE_IO;
4984         }
4985
4986         retval = pci_request_regions(pdev, "cyclades");
4987         if (retval) {
4988                 dev_err(&pdev->dev, "failed to reserve resources\n");
4989                 goto err_dis;
4990         }
4991
4992         retval = -EIO;
4993         if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
4994                         device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
4995                 card_name = "Cyclom-Y";
4996
4997                 addr0 = pci_iomap(pdev, 0, CyPCI_Yctl);
4998                 if (addr0 == NULL) {
4999                         dev_err(&pdev->dev, "can't remap ctl region\n");
5000                         goto err_reg;
5001                 }
5002                 addr2 = pci_iomap(pdev, 2, CyPCI_Ywin);
5003                 if (addr2 == NULL) {
5004                         dev_err(&pdev->dev, "can't remap base region\n");
5005                         goto err_unmap;
5006                 }
5007
5008                 nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1);
5009                 if (nchan == 0) {
5010                         dev_err(&pdev->dev, "Cyclom-Y PCI host card with no "
5011                                         "Serial-Modules\n");
5012                         return -EIO;
5013                 }
5014         } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
5015                 struct RUNTIME_9060 __iomem *ctl_addr;
5016
5017                 ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl);
5018                 if (addr0 == NULL) {
5019                         dev_err(&pdev->dev, "can't remap ctl region\n");
5020                         goto err_reg;
5021                 }
5022
5023                 /* Disable interrupts on the PLX before resetting it */
5024                 cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900);
5025
5026                 plx_init(pdev, irq, addr0);
5027
5028                 mailbox = (u32)readl(&ctl_addr->mail_box_0);
5029
5030                 addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ?
5031                                 CyPCI_Ze_win : CyPCI_Zwin);
5032                 if (addr2 == NULL) {
5033                         dev_err(&pdev->dev, "can't remap base region\n");
5034                         goto err_unmap;
5035                 }
5036
5037                 if (mailbox == ZE_V1) {
5038                         card_name = "Cyclades-Ze";
5039
5040                         readl(&ctl_addr->mail_box_0);
5041                         nchan = ZE_V1_NPORTS;
5042                 } else {
5043                         card_name = "Cyclades-8Zo";
5044
5045 #ifdef CY_PCI_DEBUG
5046                         if (mailbox == ZO_V1) {
5047                                 cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
5048                                 dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA "
5049                                         "id %lx, ver %lx\n", (ulong)(0xff &
5050                                         readl(&((struct CUSTOM_REG *)addr2)->
5051                                                 fpga_id)), (ulong)(0xff &
5052                                         readl(&((struct CUSTOM_REG *)addr2)->
5053                                                 fpga_version)));
5054                                 cy_writel(&ctl_addr->loc_addr_base, WIN_RAM);
5055                         } else {
5056                                 dev_info(&pdev->dev, "Cyclades-Z/PCI: New "
5057                                         "Cyclades-Z board.  FPGA not loaded\n");
5058                         }
5059 #endif
5060                         /* The following clears the firmware id word.  This
5061                            ensures that the driver will not attempt to talk to
5062                            the board until it has been properly initialized.
5063                          */
5064                         if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
5065                                 cy_writel(addr2 + ID_ADDRESS, 0L);
5066
5067                         retval = cyz_load_fw(pdev, addr2, addr0, irq);
5068                         if (retval)
5069                                 goto err_unmap;
5070                         /* This must be a Cyclades-8Zo/PCI.  The extendable
5071                            version will have a different device_id and will
5072                            be allocated its maximum number of ports. */
5073                         nchan = 8;
5074                 }
5075         }
5076
5077         if ((cy_next_channel + nchan) > NR_PORTS) {
5078                 dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
5079                         "channels are available. Change NR_PORTS in "
5080                         "cyclades.c and recompile kernel.\n");
5081                 goto err_unmap;
5082         }
5083         /* fill the next cy_card structure available */
5084         for (card_no = 0; card_no < NR_CARDS; card_no++) {
5085                 if (cy_card[card_no].base_addr == NULL)
5086                         break;
5087         }
5088         if (card_no == NR_CARDS) {      /* no more cy_cards available */
5089                 dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
5090                         "more cards can be used. Change NR_CARDS in "
5091                         "cyclades.c and recompile kernel.\n");
5092                 goto err_unmap;
5093         }
5094
5095         if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
5096                         device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
5097                 /* allocate IRQ */
5098                 retval = request_irq(irq, cyy_interrupt,
5099                                 IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]);
5100                 if (retval) {
5101                         dev_err(&pdev->dev, "could not allocate IRQ\n");
5102                         goto err_unmap;
5103                 }
5104                 cy_card[card_no].num_chips = nchan / 4;
5105         } else {
5106 #ifdef CONFIG_CYZ_INTR
5107                 /* allocate IRQ only if board has an IRQ */
5108                 if (irq != 0 && irq != 255) {
5109                         retval = request_irq(irq, cyz_interrupt,
5110                                         IRQF_SHARED, "Cyclades-Z",
5111                                         &cy_card[card_no]);
5112                         if (retval) {
5113                                 dev_err(&pdev->dev, "could not allocate IRQ\n");
5114                                 goto err_unmap;
5115                         }
5116                 }
5117 #endif                          /* CONFIG_CYZ_INTR */
5118                 cy_card[card_no].num_chips = (unsigned int)-1;
5119         }
5120
5121         /* set cy_card */
5122         cy_card[card_no].base_addr = addr2;
5123         cy_card[card_no].ctl_addr = addr0;
5124         cy_card[card_no].irq = irq;
5125         cy_card[card_no].bus_index = 1;
5126         cy_card[card_no].first_line = cy_next_channel;
5127         retval = cy_init_card(&cy_card[card_no]);
5128         if (retval)
5129                 goto err_null;
5130
5131         pci_set_drvdata(pdev, &cy_card[card_no]);
5132
5133         if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
5134                         device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
5135                 /* enable interrupts in the PCI interface */
5136                 plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
5137                 switch (plx_ver) {
5138                 case PLX_9050:
5139
5140                         cy_writeb(addr0 + 0x4c, 0x43);
5141                         break;
5142
5143                 case PLX_9060:
5144                 case PLX_9080:
5145                 default:        /* Old boards, use PLX_9060 */
5146                         plx_init(pdev, irq, addr0);
5147                         cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900);
5148                         break;
5149                 }
5150         }
5151
5152         dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
5153                 "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel);
5154         for (i = cy_next_channel; i < cy_next_channel + nchan; i++)
5155                 tty_register_device(cy_serial_driver, i, &pdev->dev);
5156         cy_next_channel += nchan;
5157
5158         return 0;
5159 err_null:
5160         cy_card[card_no].base_addr = NULL;
5161         free_irq(irq, &cy_card[card_no]);
5162 err_unmap:
5163         pci_iounmap(pdev, addr0);
5164         if (addr2)
5165                 pci_iounmap(pdev, addr2);
5166 err_reg:
5167         pci_release_regions(pdev);
5168 err_dis:
5169         pci_disable_device(pdev);
5170 err:
5171         return retval;
5172 }
5173
5174 static void __devexit cy_pci_remove(struct pci_dev *pdev)
5175 {
5176         struct cyclades_card *cinfo = pci_get_drvdata(pdev);
5177         unsigned int i;
5178
5179         /* non-Z with old PLX */
5180         if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
5181                         PLX_9050)
5182                 cy_writeb(cinfo->ctl_addr + 0x4c, 0);
5183         else
5184 #ifndef CONFIG_CYZ_INTR
5185                 if (!IS_CYC_Z(*cinfo))
5186 #endif
5187                 cy_writew(cinfo->ctl_addr + 0x68,
5188                                 readw(cinfo->ctl_addr + 0x68) & ~0x0900);
5189
5190         pci_iounmap(pdev, cinfo->base_addr);
5191         if (cinfo->ctl_addr)
5192                 pci_iounmap(pdev, cinfo->ctl_addr);
5193         if (cinfo->irq
5194 #ifndef CONFIG_CYZ_INTR
5195                 && !IS_CYC_Z(*cinfo)
5196 #endif /* CONFIG_CYZ_INTR */
5197                 )
5198                 free_irq(cinfo->irq, cinfo);
5199         pci_release_regions(pdev);
5200
5201         cinfo->base_addr = NULL;
5202         for (i = cinfo->first_line; i < cinfo->first_line +
5203                         cinfo->nports; i++)
5204                 tty_unregister_device(cy_serial_driver, i);
5205         cinfo->nports = 0;
5206         kfree(cinfo->ports);
5207 }
5208
5209 static struct pci_driver cy_pci_driver = {
5210         .name = "cyclades",
5211         .id_table = cy_pci_dev_id,
5212         .probe = cy_pci_probe,
5213         .remove = __devexit_p(cy_pci_remove)
5214 };
5215 #endif
5216
5217 static int
5218 cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
5219                 int *eof, void *data)
5220 {
5221         struct cyclades_port *info;
5222         unsigned int i, j;
5223         int len = 0;
5224         off_t begin = 0;
5225         off_t pos = 0;
5226         int size;
5227         __u32 cur_jifs = jiffies;
5228
5229         size = sprintf(buf, "Dev TimeOpen   BytesOut  IdleOut    BytesIn   "
5230                         "IdleIn  Overruns  Ldisc\n");
5231
5232         pos += size;
5233         len += size;
5234
5235         /* Output one line for each known port */
5236         for (i = 0; i < NR_CARDS; i++)
5237                 for (j = 0; j < cy_card[i].nports; j++) {
5238                         info = &cy_card[i].ports[j];
5239
5240                         if (info->count)
5241                                 size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
5242                                         "%10lu %8lu %9lu %6ld\n", info->line,
5243                                         (cur_jifs - info->idle_stats.in_use) /
5244                                         HZ, info->idle_stats.xmit_bytes,
5245                                         (cur_jifs - info->idle_stats.xmit_idle)/
5246                                         HZ, info->idle_stats.recv_bytes,
5247                                         (cur_jifs - info->idle_stats.recv_idle)/
5248                                         HZ, info->idle_stats.overruns,
5249                                         (long)info->tty->ldisc.num);
5250                         else
5251                                 size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
5252                                         "%10lu %8lu %9lu %6ld\n",
5253                                         info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);
5254                         len += size;
5255                         pos = begin + len;
5256
5257                         if (pos < offset) {
5258                                 len = 0;
5259                                 begin = pos;
5260                         }
5261                         if (pos > offset + length)
5262                                 goto done;
5263                 }
5264         *eof = 1;
5265 done:
5266         *start = buf + (offset - begin);        /* Start of wanted data */
5267         len -= (offset - begin);        /* Start slop */
5268         if (len > length)
5269                 len = length;   /* Ending slop */
5270         if (len < 0)
5271                 len = 0;
5272         return len;
5273 }
5274
5275 /* The serial driver boot-time initialization code!
5276     Hardware I/O ports are mapped to character special devices on a
5277     first found, first allocated manner.  That is, this code searches
5278     for Cyclom cards in the system.  As each is found, it is probed
5279     to discover how many chips (and thus how many ports) are present.
5280     These ports are mapped to the tty ports 32 and upward in monotonic
5281     fashion.  If an 8-port card is replaced with a 16-port card, the
5282     port mapping on a following card will shift.
5283
5284     This approach is different from what is used in the other serial
5285     device driver because the Cyclom is more properly a multiplexer,
5286     not just an aggregation of serial ports on one card.
5287
5288     If there are more cards with more ports than have been
5289     statically allocated above, a warning is printed and the
5290     extra ports are ignored.
5291  */
5292
5293 static const struct tty_operations cy_ops = {
5294         .open = cy_open,
5295         .close = cy_close,
5296         .write = cy_write,
5297         .put_char = cy_put_char,
5298         .flush_chars = cy_flush_chars,
5299         .write_room = cy_write_room,
5300         .chars_in_buffer = cy_chars_in_buffer,
5301         .flush_buffer = cy_flush_buffer,
5302         .ioctl = cy_ioctl,
5303         .throttle = cy_throttle,
5304         .unthrottle = cy_unthrottle,
5305         .set_termios = cy_set_termios,
5306         .stop = cy_stop,
5307         .start = cy_start,
5308         .hangup = cy_hangup,
5309         .break_ctl = cy_break,
5310         .wait_until_sent = cy_wait_until_sent,
5311         .read_proc = cyclades_get_proc_info,
5312         .tiocmget = cy_tiocmget,
5313         .tiocmset = cy_tiocmset,
5314 };
5315
5316 static int __init cy_init(void)
5317 {
5318         unsigned int nboards;
5319         int retval = -ENOMEM;
5320
5321         cy_serial_driver = alloc_tty_driver(NR_PORTS);
5322         if (!cy_serial_driver)
5323                 goto err;
5324
5325         printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n",
5326                         __DATE__, __TIME__);
5327
5328         /* Initialize the tty_driver structure */
5329
5330         cy_serial_driver->owner = THIS_MODULE;
5331         cy_serial_driver->driver_name = "cyclades";
5332         cy_serial_driver->name = "ttyC";
5333         cy_serial_driver->major = CYCLADES_MAJOR;
5334         cy_serial_driver->minor_start = 0;
5335         cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
5336         cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
5337         cy_serial_driver->init_termios = tty_std_termios;
5338         cy_serial_driver->init_termios.c_cflag =
5339             B9600 | CS8 | CREAD | HUPCL | CLOCAL;
5340         cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
5341         tty_set_operations(cy_serial_driver, &cy_ops);
5342
5343         retval = tty_register_driver(cy_serial_driver);
5344         if (retval) {
5345                 printk(KERN_ERR "Couldn't register Cyclades serial driver\n");
5346                 goto err_frtty;
5347         }
5348
5349         /* the code below is responsible to find the boards. Each different
5350            type of board has its own detection routine. If a board is found,
5351            the next cy_card structure available is set by the detection
5352            routine. These functions are responsible for checking the
5353            availability of cy_card and cy_port data structures and updating
5354            the cy_next_channel. */
5355
5356         /* look for isa boards */
5357         nboards = cy_detect_isa();
5358
5359 #ifdef CONFIG_PCI
5360         /* look for pci boards */
5361         retval = pci_register_driver(&cy_pci_driver);
5362         if (retval && !nboards) {
5363                 tty_unregister_driver(cy_serial_driver);
5364                 goto err_frtty;
5365         }
5366 #endif
5367
5368         return 0;
5369 err_frtty:
5370         put_tty_driver(cy_serial_driver);
5371 err:
5372         return retval;
5373 }                               /* cy_init */
5374
5375 static void __exit cy_cleanup_module(void)
5376 {
5377         struct cyclades_card *card;
5378         unsigned int i, e1;
5379
5380 #ifndef CONFIG_CYZ_INTR
5381         del_timer_sync(&cyz_timerlist);
5382 #endif /* CONFIG_CYZ_INTR */
5383
5384         e1 = tty_unregister_driver(cy_serial_driver);
5385         if (e1)
5386                 printk(KERN_ERR "failed to unregister Cyclades serial "
5387                                 "driver(%d)\n", e1);
5388
5389 #ifdef CONFIG_PCI
5390         pci_unregister_driver(&cy_pci_driver);
5391 #endif
5392
5393         for (i = 0; i < NR_CARDS; i++) {
5394                 card = &cy_card[i];
5395                 if (card->base_addr) {
5396                         /* clear interrupt */
5397                         cy_writeb(card->base_addr + Cy_ClrIntr, 0);
5398                         iounmap(card->base_addr);
5399                         if (card->ctl_addr)
5400                                 iounmap(card->ctl_addr);
5401                         if (card->irq
5402 #ifndef CONFIG_CYZ_INTR
5403                                 && !IS_CYC_Z(*card)
5404 #endif /* CONFIG_CYZ_INTR */
5405                                 )
5406                                 free_irq(card->irq, card);
5407                         for (e1 = card->first_line; e1 < card->first_line +
5408                                         card->nports; e1++)
5409                                 tty_unregister_device(cy_serial_driver, e1);
5410                         kfree(card->ports);
5411                 }
5412         }
5413
5414         put_tty_driver(cy_serial_driver);
5415 } /* cy_cleanup_module */
5416
5417 module_init(cy_init);
5418 module_exit(cy_cleanup_module);
5419
5420 MODULE_LICENSE("GPL");
5421 MODULE_VERSION(CY_VERSION);