Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
[linux-2.6] / drivers / char / serial167.c
1 /*
2  * linux/drivers/char/serial167.c
3  *
4  * Driver for MVME166/7 board serial ports, which are via a CD2401.
5  * Based very much on cyclades.c.
6  *
7  * MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk]
8  *
9  * ==============================================================
10  *
11  * static char rcsid[] =
12  * "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $";
13  *
14  *  linux/kernel/cyclades.c
15  *
16  * Maintained by Marcio Saito (cyclades@netcom.com) and
17  * Randolph Bentson (bentson@grieg.seaslug.org)
18  *
19  * Much of the design and some of the code came from serial.c
20  * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
21  * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
22  * and then fixed as suggested by Michael K. Johnson 12/12/92.
23  *
24  * This version does not support shared irq's.
25  *
26  * $Log: cyclades.c,v $
27  * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
28  * disambiguate between Cyclom-16Y and Cyclom-32Ye;
29  *
30  * Changes:
31  *
32  * 200 lines of changes record removed - RGH 11-10-95, starting work on
33  * converting this to drive serial ports on mvme166 (cd2401).
34  *
35  * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/08/25
36  * - get rid of verify_area
37  * - use get_user to access memory from userspace in set_threshold,
38  *   set_default_threshold and set_timeout
39  * - don't use the panic function in serial167_init
40  * - do resource release on failure on serial167_init
41  * - include missing restore_flags in mvme167_serial_console_setup
42  *
43  * Kars de Jong <jongk@linux-m68k.org> - 2004/09/06
44  * - replace bottom half handler with task queue handler
45  */
46
47 #include <linux/errno.h>
48 #include <linux/signal.h>
49 #include <linux/sched.h>
50 #include <linux/timer.h>
51 #include <linux/tty.h>
52 #include <linux/interrupt.h>
53 #include <linux/serial.h>
54 #include <linux/serialP.h>
55 #include <linux/string.h>
56 #include <linux/fcntl.h>
57 #include <linux/ptrace.h>
58 #include <linux/serial167.h>
59 #include <linux/delay.h>
60 #include <linux/major.h>
61 #include <linux/mm.h>
62 #include <linux/console.h>
63 #include <linux/module.h>
64 #include <linux/bitops.h>
65 #include <linux/tty_flip.h>
66
67 #include <asm/system.h>
68 #include <asm/io.h>
69 #include <asm/mvme16xhw.h>
70 #include <asm/bootinfo.h>
71 #include <asm/setup.h>
72
73 #include <linux/types.h>
74 #include <linux/kernel.h>
75
76 #include <asm/uaccess.h>
77 #include <linux/init.h>
78
79 #define SERIAL_PARANOIA_CHECK
80 #undef  SERIAL_DEBUG_OPEN
81 #undef  SERIAL_DEBUG_THROTTLE
82 #undef  SERIAL_DEBUG_OTHER
83 #undef  SERIAL_DEBUG_IO
84 #undef  SERIAL_DEBUG_COUNT
85 #undef  SERIAL_DEBUG_DTR
86 #undef  CYCLOM_16Y_HACK
87 #define  CYCLOM_ENABLE_MONITORING
88
89 #define WAKEUP_CHARS 256
90
91 #define STD_COM_FLAGS (0)
92
93 #define SERIAL_TYPE_NORMAL  1
94
95 static struct tty_driver *cy_serial_driver;
96 extern int serial_console;
97 static struct cyclades_port *serial_console_info = NULL;
98 static unsigned int serial_console_cflag = 0;
99 u_char initial_console_speed;
100
101 /* Base address of cd2401 chip on mvme166/7 */
102
103 #define BASE_ADDR (0xfff45000)
104 #define pcc2chip        ((volatile u_char *)0xfff42000)
105 #define PccSCCMICR      0x1d
106 #define PccSCCTICR      0x1e
107 #define PccSCCRICR      0x1f
108 #define PccTPIACKR      0x25
109 #define PccRPIACKR      0x27
110 #define PccIMLR         0x3f
111
112 /* This is the per-port data structure */
113 struct cyclades_port cy_port[] = {
114         /* CARD#  */
115         {-1},                   /* ttyS0 */
116         {-1},                   /* ttyS1 */
117         {-1},                   /* ttyS2 */
118         {-1},                   /* ttyS3 */
119 };
120
121 #define NR_PORTS        ARRAY_SIZE(cy_port)
122
123 /*
124  * This is used to look up the divisor speeds and the timeouts
125  * We're normally limited to 15 distinct baud rates.  The extra
126  * are accessed via settings in info->flags.
127  *         0,     1,     2,     3,     4,     5,     6,     7,     8,     9,
128  *        10,    11,    12,    13,    14,    15,    16,    17,    18,    19,
129  *                                                  HI            VHI
130  */
131 static int baud_table[] = {
132         0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
133         1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
134         0
135 };
136
137 #if 0
138 static char baud_co[] = {       /* 25 MHz clock option table */
139         /* value =>    00    01   02    03    04 */
140         /* divide by    8    32   128   512  2048 */
141         0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
142         0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
143 };
144
145 static char baud_bpr[] = {      /* 25 MHz baud rate period table */
146         0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
147         0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
148 };
149 #endif
150
151 /* I think 166 brd clocks 2401 at 20MHz.... */
152
153 /* These values are written directly to tcor, and >> 5 for writing to rcor */
154 static u_char baud_co[] = {     /* 20 MHz clock option table */
155         0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40,
156         0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
157 };
158
159 /* These values written directly to tbpr/rbpr */
160 static u_char baud_bpr[] = {    /* 20 MHz baud rate period table */
161         0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81,
162         0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10
163 };
164
165 static u_char baud_cor4[] = {   /* receive threshold */
166         0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
167         0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07
168 };
169
170 static void shutdown(struct cyclades_port *);
171 static int startup(struct cyclades_port *);
172 static void cy_throttle(struct tty_struct *);
173 static void cy_unthrottle(struct tty_struct *);
174 static void config_setup(struct cyclades_port *);
175 extern void console_print(const char *);
176 #ifdef CYCLOM_SHOW_STATUS
177 static void show_status(int);
178 #endif
179
180 #ifdef CONFIG_REMOTE_DEBUG
181 static void debug_setup(void);
182 void queueDebugChar(int c);
183 int getDebugChar(void);
184
185 #define DEBUG_PORT      1
186 #define DEBUG_LEN       256
187
188 typedef struct {
189         int in;
190         int out;
191         unsigned char buf[DEBUG_LEN];
192 } debugq;
193
194 debugq debugiq;
195 #endif
196
197 /*
198  * I have my own version of udelay(), as it is needed when initialising
199  * the chip, before the delay loop has been calibrated.  Should probably
200  * reference one of the vmechip2 or pccchip2 counter for an accurate
201  * delay, but this wild guess will do for now.
202  */
203
204 void my_udelay(long us)
205 {
206         u_char x;
207         volatile u_char *p = &x;
208         int i;
209
210         while (us--)
211                 for (i = 100; i; i--)
212                         x |= *p;
213 }
214
215 static inline int serial_paranoia_check(struct cyclades_port *info, char *name,
216                 const char *routine)
217 {
218 #ifdef SERIAL_PARANOIA_CHECK
219         if (!info) {
220                 printk("Warning: null cyclades_port for (%s) in %s\n", name,
221                                 routine);
222                 return 1;
223         }
224
225         if ((long)info < (long)(&cy_port[0])
226             || (long)(&cy_port[NR_PORTS]) < (long)info) {
227                 printk("Warning: cyclades_port out of range for (%s) in %s\n",
228                                 name, routine);
229                 return 1;
230         }
231
232         if (info->magic != CYCLADES_MAGIC) {
233                 printk("Warning: bad magic number for serial struct (%s) in "
234                                 "%s\n", name, routine);
235                 return 1;
236         }
237 #endif
238         return 0;
239 }                               /* serial_paranoia_check */
240
241 #if 0
242 /* The following diagnostic routines allow the driver to spew
243    information on the screen, even (especially!) during interrupts.
244  */
245 void SP(char *data)
246 {
247         unsigned long flags;
248         local_irq_save(flags);
249         console_print(data);
250         local_irq_restore(flags);
251 }
252
253 char scrn[2];
254 void CP(char data)
255 {
256         unsigned long flags;
257         local_irq_save(flags);
258         scrn[0] = data;
259         console_print(scrn);
260         local_irq_restore(flags);
261 }                               /* CP */
262
263 void CP1(int data)
264 {
265         (data < 10) ? CP(data + '0') : CP(data + 'A' - 10);
266 }                               /* CP1 */
267 void CP2(int data)
268 {
269         CP1((data >> 4) & 0x0f);
270         CP1(data & 0x0f);
271 }                               /* CP2 */
272 void CP4(int data)
273 {
274         CP2((data >> 8) & 0xff);
275         CP2(data & 0xff);
276 }                               /* CP4 */
277 void CP8(long data)
278 {
279         CP4((data >> 16) & 0xffff);
280         CP4(data & 0xffff);
281 }                               /* CP8 */
282 #endif
283
284 /* This routine waits up to 1000 micro-seconds for the previous
285    command to the Cirrus chip to complete and then issues the
286    new command.  An error is returned if the previous command
287    didn't finish within the time limit.
288  */
289 u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd)
290 {
291         unsigned long flags;
292         volatile int i;
293
294         local_irq_save(flags);
295         /* Check to see that the previous command has completed */
296         for (i = 0; i < 100; i++) {
297                 if (base_addr[CyCCR] == 0) {
298                         break;
299                 }
300                 my_udelay(10L);
301         }
302         /* if the CCR never cleared, the previous command
303            didn't finish within the "reasonable time" */
304         if (i == 10) {
305                 local_irq_restore(flags);
306                 return (-1);
307         }
308
309         /* Issue the new command */
310         base_addr[CyCCR] = cmd;
311         local_irq_restore(flags);
312         return (0);
313 }                               /* write_cy_cmd */
314
315 /* cy_start and cy_stop provide software output flow control as a
316    function of XON/XOFF, software CTS, and other such stuff. */
317
318 static void cy_stop(struct tty_struct *tty)
319 {
320         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
321         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
322         int channel;
323         unsigned long flags;
324
325 #ifdef SERIAL_DEBUG_OTHER
326         printk("cy_stop %s\n", tty->name);      /* */
327 #endif
328
329         if (serial_paranoia_check(info, tty->name, "cy_stop"))
330                 return;
331
332         channel = info->line;
333
334         local_irq_save(flags);
335         base_addr[CyCAR] = (u_char) (channel);  /* index channel */
336         base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
337         local_irq_restore(flags);
338 }                               /* cy_stop */
339
340 static void cy_start(struct tty_struct *tty)
341 {
342         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
343         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
344         int channel;
345         unsigned long flags;
346
347 #ifdef SERIAL_DEBUG_OTHER
348         printk("cy_start %s\n", tty->name);     /* */
349 #endif
350
351         if (serial_paranoia_check(info, tty->name, "cy_start"))
352                 return;
353
354         channel = info->line;
355
356         local_irq_save(flags);
357         base_addr[CyCAR] = (u_char) (channel);
358         base_addr[CyIER] |= CyTxMpty;
359         local_irq_restore(flags);
360 }                               /* cy_start */
361
362 /*
363  * This routine is used by the interrupt handler to schedule
364  * processing in the software interrupt portion of the driver
365  * (also known as the "bottom half").  This can be called any
366  * number of times for any channel without harm.
367  */
368 static inline void cy_sched_event(struct cyclades_port *info, int event)
369 {
370         info->event |= 1 << event;      /* remember what kind of event and who */
371         schedule_work(&info->tqueue);
372 }                               /* cy_sched_event */
373
374 /* The real interrupt service routines are called
375    whenever the card wants its hand held--chars
376    received, out buffer empty, modem change, etc.
377  */
378 static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id)
379 {
380         struct tty_struct *tty;
381         struct cyclades_port *info;
382         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
383         unsigned char err, rfoc;
384         int channel;
385         char data;
386
387         /* determine the channel and change to that context */
388         channel = (u_short) (base_addr[CyLICR] >> 2);
389         info = &cy_port[channel];
390         info->last_active = jiffies;
391
392         if ((err = base_addr[CyRISR]) & CyTIMEOUT) {
393                 /* This is a receive timeout interrupt, ignore it */
394                 base_addr[CyREOIR] = CyNOTRANS;
395                 return IRQ_HANDLED;
396         }
397
398         /* Read a byte of data if there is any - assume the error
399          * is associated with this character */
400
401         if ((rfoc = base_addr[CyRFOC]) != 0)
402                 data = base_addr[CyRDR];
403         else
404                 data = 0;
405
406         /* if there is nowhere to put the data, discard it */
407         if (info->tty == 0) {
408                 base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
409                 return IRQ_HANDLED;
410         } else {                /* there is an open port for this data */
411                 tty = info->tty;
412                 if (err & info->ignore_status_mask) {
413                         base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
414                         return IRQ_HANDLED;
415                 }
416                 if (tty_buffer_request_room(tty, 1) != 0) {
417                         if (err & info->read_status_mask) {
418                                 if (err & CyBREAK) {
419                                         tty_insert_flip_char(tty, data,
420                                                              TTY_BREAK);
421                                         if (info->flags & ASYNC_SAK) {
422                                                 do_SAK(tty);
423                                         }
424                                 } else if (err & CyFRAME) {
425                                         tty_insert_flip_char(tty, data,
426                                                              TTY_FRAME);
427                                 } else if (err & CyPARITY) {
428                                         tty_insert_flip_char(tty, data,
429                                                              TTY_PARITY);
430                                 } else if (err & CyOVERRUN) {
431                                         tty_insert_flip_char(tty, 0,
432                                                              TTY_OVERRUN);
433                                         /*
434                                            If the flip buffer itself is
435                                            overflowing, we still loose
436                                            the next incoming character.
437                                          */
438                                         if (tty_buffer_request_room(tty, 1) !=
439                                             0) {
440                                                 tty_insert_flip_char(tty, data,
441                                                                      TTY_FRAME);
442                                         }
443                                         /* These two conditions may imply */
444                                         /* a normal read should be done. */
445                                         /* else if(data & CyTIMEOUT) */
446                                         /* else if(data & CySPECHAR) */
447                                 } else {
448                                         tty_insert_flip_char(tty, 0,
449                                                              TTY_NORMAL);
450                                 }
451                         } else {
452                                 tty_insert_flip_char(tty, data, TTY_NORMAL);
453                         }
454                 } else {
455                         /* there was a software buffer overrun
456                            and nothing could be done about it!!! */
457                 }
458         }
459         tty_schedule_flip(tty);
460         /* end of service */
461         base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
462         return IRQ_HANDLED;
463 }                               /* cy_rxerr_interrupt */
464
465 static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id)
466 {
467         struct cyclades_port *info;
468         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
469         int channel;
470         int mdm_change;
471         int mdm_status;
472
473         /* determine the channel and change to that context */
474         channel = (u_short) (base_addr[CyLICR] >> 2);
475         info = &cy_port[channel];
476         info->last_active = jiffies;
477
478         mdm_change = base_addr[CyMISR];
479         mdm_status = base_addr[CyMSVR1];
480
481         if (info->tty == 0) {   /* nowhere to put the data, ignore it */
482                 ;
483         } else {
484                 if ((mdm_change & CyDCD)
485                     && (info->flags & ASYNC_CHECK_CD)) {
486                         if (mdm_status & CyDCD) {
487 /* CP('!'); */
488                                 cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP);
489                         } else {
490 /* CP('@'); */
491                                 cy_sched_event(info, Cy_EVENT_HANGUP);
492                         }
493                 }
494                 if ((mdm_change & CyCTS)
495                     && (info->flags & ASYNC_CTS_FLOW)) {
496                         if (info->tty->stopped) {
497                                 if (mdm_status & CyCTS) {
498                                         /* !!! cy_start isn't used because... */
499                                         info->tty->stopped = 0;
500                                         base_addr[CyIER] |= CyTxMpty;
501                                         cy_sched_event(info,
502                                                        Cy_EVENT_WRITE_WAKEUP);
503                                 }
504                         } else {
505                                 if (!(mdm_status & CyCTS)) {
506                                         /* !!! cy_stop isn't used because... */
507                                         info->tty->stopped = 1;
508                                         base_addr[CyIER] &=
509                                             ~(CyTxMpty | CyTxRdy);
510                                 }
511                         }
512                 }
513                 if (mdm_status & CyDSR) {
514                 }
515         }
516         base_addr[CyMEOIR] = 0;
517         return IRQ_HANDLED;
518 }                               /* cy_modem_interrupt */
519
520 static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
521 {
522         struct cyclades_port *info;
523         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
524         int channel;
525         int char_count, saved_cnt;
526         int outch;
527
528         /* determine the channel and change to that context */
529         channel = (u_short) (base_addr[CyLICR] >> 2);
530
531 #ifdef CONFIG_REMOTE_DEBUG
532         if (channel == DEBUG_PORT) {
533                 panic("TxInt on debug port!!!");
534         }
535 #endif
536
537         info = &cy_port[channel];
538
539         /* validate the port number (as configured and open) */
540         if ((channel < 0) || (NR_PORTS <= channel)) {
541                 base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
542                 base_addr[CyTEOIR] = CyNOTRANS;
543                 return IRQ_HANDLED;
544         }
545         info->last_active = jiffies;
546         if (info->tty == 0) {
547                 base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
548                 if (info->xmit_cnt < WAKEUP_CHARS) {
549                         cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
550                 }
551                 base_addr[CyTEOIR] = CyNOTRANS;
552                 return IRQ_HANDLED;
553         }
554
555         /* load the on-chip space available for outbound data */
556         saved_cnt = char_count = base_addr[CyTFTC];
557
558         if (info->x_char) {     /* send special char */
559                 outch = info->x_char;
560                 base_addr[CyTDR] = outch;
561                 char_count--;
562                 info->x_char = 0;
563         }
564
565         if (info->x_break) {
566                 /*  The Cirrus chip requires the "Embedded Transmit
567                    Commands" of start break, delay, and end break
568                    sequences to be sent.  The duration of the
569                    break is given in TICs, which runs at HZ
570                    (typically 100) and the PPR runs at 200 Hz,
571                    so the delay is duration * 200/HZ, and thus a
572                    break can run from 1/100 sec to about 5/4 sec.
573                    Need to check these values - RGH 141095.
574                  */
575                 base_addr[CyTDR] = 0;   /* start break */
576                 base_addr[CyTDR] = 0x81;
577                 base_addr[CyTDR] = 0;   /* delay a bit */
578                 base_addr[CyTDR] = 0x82;
579                 base_addr[CyTDR] = info->x_break * 200 / HZ;
580                 base_addr[CyTDR] = 0;   /* terminate break */
581                 base_addr[CyTDR] = 0x83;
582                 char_count -= 7;
583                 info->x_break = 0;
584         }
585
586         while (char_count > 0) {
587                 if (!info->xmit_cnt) {
588                         base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
589                         break;
590                 }
591                 if (info->xmit_buf == 0) {
592                         base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
593                         break;
594                 }
595                 if (info->tty->stopped || info->tty->hw_stopped) {
596                         base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
597                         break;
598                 }
599                 /* Because the Embedded Transmit Commands have been
600                    enabled, we must check to see if the escape
601                    character, NULL, is being sent.  If it is, we
602                    must ensure that there is room for it to be
603                    doubled in the output stream.  Therefore we
604                    no longer advance the pointer when the character
605                    is fetched, but rather wait until after the check
606                    for a NULL output character. (This is necessary
607                    because there may not be room for the two chars
608                    needed to send a NULL.
609                  */
610                 outch = info->xmit_buf[info->xmit_tail];
611                 if (outch) {
612                         info->xmit_cnt--;
613                         info->xmit_tail = (info->xmit_tail + 1)
614                             & (PAGE_SIZE - 1);
615                         base_addr[CyTDR] = outch;
616                         char_count--;
617                 } else {
618                         if (char_count > 1) {
619                                 info->xmit_cnt--;
620                                 info->xmit_tail = (info->xmit_tail + 1)
621                                     & (PAGE_SIZE - 1);
622                                 base_addr[CyTDR] = outch;
623                                 base_addr[CyTDR] = 0;
624                                 char_count--;
625                                 char_count--;
626                         } else {
627                                 break;
628                         }
629                 }
630         }
631
632         if (info->xmit_cnt < WAKEUP_CHARS) {
633                 cy_sched_event(info, Cy_EVENT_WRITE_WAKEUP);
634         }
635         base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS;
636         return IRQ_HANDLED;
637 }                               /* cy_tx_interrupt */
638
639 static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
640 {
641         struct tty_struct *tty;
642         struct cyclades_port *info;
643         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
644         int channel;
645         char data;
646         int char_count;
647         int save_cnt;
648         int len;
649
650         /* determine the channel and change to that context */
651         channel = (u_short) (base_addr[CyLICR] >> 2);
652         info = &cy_port[channel];
653         info->last_active = jiffies;
654         save_cnt = char_count = base_addr[CyRFOC];
655
656 #ifdef CONFIG_REMOTE_DEBUG
657         if (channel == DEBUG_PORT) {
658                 while (char_count--) {
659                         data = base_addr[CyRDR];
660                         queueDebugChar(data);
661                 }
662         } else
663 #endif
664                 /* if there is nowhere to put the data, discard it */
665         if (info->tty == 0) {
666                 while (char_count--) {
667                         data = base_addr[CyRDR];
668                 }
669         } else {                /* there is an open port for this data */
670                 tty = info->tty;
671                 /* load # characters available from the chip */
672
673 #ifdef CYCLOM_ENABLE_MONITORING
674                 ++info->mon.int_count;
675                 info->mon.char_count += char_count;
676                 if (char_count > info->mon.char_max)
677                         info->mon.char_max = char_count;
678                 info->mon.char_last = char_count;
679 #endif
680                 len = tty_buffer_request_room(tty, char_count);
681                 while (len--) {
682                         data = base_addr[CyRDR];
683                         tty_insert_flip_char(tty, data, TTY_NORMAL);
684 #ifdef CYCLOM_16Y_HACK
685                         udelay(10L);
686 #endif
687                 }
688                 tty_schedule_flip(tty);
689         }
690         /* end of service */
691         base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS;
692         return IRQ_HANDLED;
693 }                               /* cy_rx_interrupt */
694
695 /*
696  * This routine is used to handle the "bottom half" processing for the
697  * serial driver, known also the "software interrupt" processing.
698  * This processing is done at the kernel interrupt level, after the
699  * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON.  This
700  * is where time-consuming activities which can not be done in the
701  * interrupt driver proper are done; the interrupt driver schedules
702  * them using cy_sched_event(), and they get done here.
703  *
704  * This is done through one level of indirection--the task queue.
705  * When a hardware interrupt service routine wants service by the
706  * driver's bottom half, it enqueues the appropriate tq_struct (one
707  * per port) to the keventd work queue and sets a request flag
708  * that the work queue be processed.
709  *
710  * Although this may seem unwieldy, it gives the system a way to
711  * pass an argument (in this case the pointer to the cyclades_port
712  * structure) to the bottom half of the driver.  Previous kernels
713  * had to poll every port to see if that port needed servicing.
714  */
715 static void do_softint(struct work_struct *ugly_api)
716 {
717         struct cyclades_port *info =
718             container_of(ugly_api, struct cyclades_port, tqueue);
719         struct tty_struct *tty;
720
721         tty = info->tty;
722         if (!tty)
723                 return;
724
725         if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
726                 tty_hangup(info->tty);
727                 wake_up_interruptible(&info->open_wait);
728                 info->flags &= ~ASYNC_NORMAL_ACTIVE;
729         }
730         if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
731                 wake_up_interruptible(&info->open_wait);
732         }
733         if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
734                 tty_wakeup(tty);
735         }
736 }                               /* do_softint */
737
738 /* This is called whenever a port becomes active;
739    interrupts are enabled and DTR & RTS are turned on.
740  */
741 static int startup(struct cyclades_port *info)
742 {
743         unsigned long flags;
744         volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
745         int channel;
746
747         if (info->flags & ASYNC_INITIALIZED) {
748                 return 0;
749         }
750
751         if (!info->type) {
752                 if (info->tty) {
753                         set_bit(TTY_IO_ERROR, &info->tty->flags);
754                 }
755                 return 0;
756         }
757         if (!info->xmit_buf) {
758                 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
759                 if (!info->xmit_buf) {
760                         return -ENOMEM;
761                 }
762         }
763
764         config_setup(info);
765
766         channel = info->line;
767
768 #ifdef SERIAL_DEBUG_OPEN
769         printk("startup channel %d\n", channel);
770 #endif
771
772         local_irq_save(flags);
773         base_addr[CyCAR] = (u_char) channel;
774         write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
775
776         base_addr[CyCAR] = (u_char) channel;    /* !!! Is this needed? */
777         base_addr[CyMSVR1] = CyRTS;
778 /* CP('S');CP('1'); */
779         base_addr[CyMSVR2] = CyDTR;
780
781 #ifdef SERIAL_DEBUG_DTR
782         printk("cyc: %d: raising DTR\n", __LINE__);
783         printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
784                base_addr[CyMSVR2]);
785 #endif
786
787         base_addr[CyIER] |= CyRxData;
788         info->flags |= ASYNC_INITIALIZED;
789
790         if (info->tty) {
791                 clear_bit(TTY_IO_ERROR, &info->tty->flags);
792         }
793         info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
794
795         local_irq_restore(flags);
796
797 #ifdef SERIAL_DEBUG_OPEN
798         printk(" done\n");
799 #endif
800         return 0;
801 }                               /* startup */
802
803 void start_xmit(struct cyclades_port *info)
804 {
805         unsigned long flags;
806         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
807         int channel;
808
809         channel = info->line;
810         local_irq_save(flags);
811         base_addr[CyCAR] = channel;
812         base_addr[CyIER] |= CyTxMpty;
813         local_irq_restore(flags);
814 }                               /* start_xmit */
815
816 /*
817  * This routine shuts down a serial port; interrupts are disabled,
818  * and DTR is dropped if the hangup on close termio flag is on.
819  */
820 static void shutdown(struct cyclades_port *info)
821 {
822         unsigned long flags;
823         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
824         int channel;
825
826         if (!(info->flags & ASYNC_INITIALIZED)) {
827 /* CP('$'); */
828                 return;
829         }
830
831         channel = info->line;
832
833 #ifdef SERIAL_DEBUG_OPEN
834         printk("shutdown channel %d\n", channel);
835 #endif
836
837         /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE
838            SENT BEFORE DROPPING THE LINE !!!  (Perhaps
839            set some flag that is read when XMTY happens.)
840            Other choices are to delay some fixed interval
841            or schedule some later processing.
842          */
843         local_irq_save(flags);
844         if (info->xmit_buf) {
845                 free_page((unsigned long)info->xmit_buf);
846                 info->xmit_buf = NULL;
847         }
848
849         base_addr[CyCAR] = (u_char) channel;
850         if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
851                 base_addr[CyMSVR1] = 0;
852 /* CP('C');CP('1'); */
853                 base_addr[CyMSVR2] = 0;
854 #ifdef SERIAL_DEBUG_DTR
855                 printk("cyc: %d: dropping DTR\n", __LINE__);
856                 printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
857                        base_addr[CyMSVR2]);
858 #endif
859         }
860         write_cy_cmd(base_addr, CyDIS_RCVR);
861         /* it may be appropriate to clear _XMIT at
862            some later date (after testing)!!! */
863
864         if (info->tty) {
865                 set_bit(TTY_IO_ERROR, &info->tty->flags);
866         }
867         info->flags &= ~ASYNC_INITIALIZED;
868         local_irq_restore(flags);
869
870 #ifdef SERIAL_DEBUG_OPEN
871         printk(" done\n");
872 #endif
873 }                               /* shutdown */
874
875 /*
876  * This routine finds or computes the various line characteristics.
877  */
878 static void config_setup(struct cyclades_port *info)
879 {
880         unsigned long flags;
881         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
882         int channel;
883         unsigned cflag;
884         int i;
885         unsigned char ti, need_init_chan = 0;
886
887         if (!info->tty || !info->tty->termios) {
888                 return;
889         }
890         if (info->line == -1) {
891                 return;
892         }
893         cflag = info->tty->termios->c_cflag;
894
895         /* baud rate */
896         i = cflag & CBAUD;
897 #ifdef CBAUDEX
898 /* Starting with kernel 1.1.65, there is direct support for
899    higher baud rates.  The following code supports those
900    changes.  The conditional aspect allows this driver to be
901    used for earlier as well as later kernel versions.  (The
902    mapping is slightly different from serial.c because there
903    is still the possibility of supporting 75 kbit/sec with
904    the Cyclades board.)
905  */
906         if (i & CBAUDEX) {
907                 if (i == B57600)
908                         i = 16;
909                 else if (i == B115200)
910                         i = 18;
911 #ifdef B78600
912                 else if (i == B78600)
913                         i = 17;
914 #endif
915                 else
916                         info->tty->termios->c_cflag &= ~CBAUDEX;
917         }
918 #endif
919         if (i == 15) {
920                 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
921                         i += 1;
922                 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
923                         i += 3;
924         }
925         /* Don't ever change the speed of the console port.  It will
926          * run at the speed specified in bootinfo, or at 19.2K */
927         /* Actually, it should run at whatever speed 166Bug was using */
928         /* Note info->timeout isn't used at present */
929         if (info != serial_console_info) {
930                 info->tbpr = baud_bpr[i];       /* Tx BPR */
931                 info->tco = baud_co[i]; /* Tx CO */
932                 info->rbpr = baud_bpr[i];       /* Rx BPR */
933                 info->rco = baud_co[i] >> 5;    /* Rx CO */
934                 if (baud_table[i] == 134) {
935                         info->timeout =
936                             (info->xmit_fifo_size * HZ * 30 / 269) + 2;
937                         /* get it right for 134.5 baud */
938                 } else if (baud_table[i]) {
939                         info->timeout =
940                             (info->xmit_fifo_size * HZ * 15 / baud_table[i]) +
941                             2;
942                         /* this needs to be propagated into the card info */
943                 } else {
944                         info->timeout = 0;
945                 }
946         }
947         /* By tradition (is it a standard?) a baud rate of zero
948            implies the line should be/has been closed.  A bit
949            later in this routine such a test is performed. */
950
951         /* byte size and parity */
952         info->cor7 = 0;
953         info->cor6 = 0;
954         info->cor5 = 0;
955         info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]);        /* receive threshold */
956         /* Following two lines added 101295, RGH. */
957         /* It is obviously wrong to access CyCORx, and not info->corx here,
958          * try and remember to fix it later! */
959         channel = info->line;
960         base_addr[CyCAR] = (u_char) channel;
961         if (C_CLOCAL(info->tty)) {
962                 if (base_addr[CyIER] & CyMdmCh)
963                         base_addr[CyIER] &= ~CyMdmCh;   /* without modem intr */
964                 /* ignore 1->0 modem transitions */
965                 if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD))
966                         base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD);
967                 /* ignore 0->1 modem transitions */
968                 if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD))
969                         base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD);
970         } else {
971                 if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh)
972                         base_addr[CyIER] |= CyMdmCh;    /* with modem intr */
973                 /* act on 1->0 modem transitions */
974                 if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) !=
975                     (CyDSR | CyCTS | CyDCD))
976                         base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD;
977                 /* act on 0->1 modem transitions */
978                 if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) !=
979                     (CyDSR | CyCTS | CyDCD))
980                         base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD;
981         }
982         info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP;
983         info->cor2 = CyETC;
984         switch (cflag & CSIZE) {
985         case CS5:
986                 info->cor1 = Cy_5_BITS;
987                 break;
988         case CS6:
989                 info->cor1 = Cy_6_BITS;
990                 break;
991         case CS7:
992                 info->cor1 = Cy_7_BITS;
993                 break;
994         case CS8:
995                 info->cor1 = Cy_8_BITS;
996                 break;
997         }
998         if (cflag & PARENB) {
999                 if (cflag & PARODD) {
1000                         info->cor1 |= CyPARITY_O;
1001                 } else {
1002                         info->cor1 |= CyPARITY_E;
1003                 }
1004         } else {
1005                 info->cor1 |= CyPARITY_NONE;
1006         }
1007
1008         /* CTS flow control flag */
1009 #if 0
1010         /* Don't complcate matters for now! RGH 141095 */
1011         if (cflag & CRTSCTS) {
1012                 info->flags |= ASYNC_CTS_FLOW;
1013                 info->cor2 |= CyCtsAE;
1014         } else {
1015                 info->flags &= ~ASYNC_CTS_FLOW;
1016                 info->cor2 &= ~CyCtsAE;
1017         }
1018 #endif
1019         if (cflag & CLOCAL)
1020                 info->flags &= ~ASYNC_CHECK_CD;
1021         else
1022                 info->flags |= ASYNC_CHECK_CD;
1023
1024      /***********************************************
1025         The hardware option, CyRtsAO, presents RTS when
1026         the chip has characters to send.  Since most modems
1027         use RTS as reverse (inbound) flow control, this
1028         option is not used.  If inbound flow control is
1029         necessary, DTR can be programmed to provide the
1030         appropriate signals for use with a non-standard
1031         cable.  Contact Marcio Saito for details.
1032      ***********************************************/
1033
1034         channel = info->line;
1035
1036         local_irq_save(flags);
1037         base_addr[CyCAR] = (u_char) channel;
1038
1039         /* CyCMR set once only in mvme167_init_serial() */
1040         if (base_addr[CyLICR] != channel << 2)
1041                 base_addr[CyLICR] = channel << 2;
1042         if (base_addr[CyLIVR] != 0x5c)
1043                 base_addr[CyLIVR] = 0x5c;
1044
1045         /* tx and rx baud rate */
1046
1047         if (base_addr[CyCOR1] != info->cor1)
1048                 need_init_chan = 1;
1049         if (base_addr[CyTCOR] != info->tco)
1050                 base_addr[CyTCOR] = info->tco;
1051         if (base_addr[CyTBPR] != info->tbpr)
1052                 base_addr[CyTBPR] = info->tbpr;
1053         if (base_addr[CyRCOR] != info->rco)
1054                 base_addr[CyRCOR] = info->rco;
1055         if (base_addr[CyRBPR] != info->rbpr)
1056                 base_addr[CyRBPR] = info->rbpr;
1057
1058         /* set line characteristics  according configuration */
1059
1060         if (base_addr[CySCHR1] != START_CHAR(info->tty))
1061                 base_addr[CySCHR1] = START_CHAR(info->tty);
1062         if (base_addr[CySCHR2] != STOP_CHAR(info->tty))
1063                 base_addr[CySCHR2] = STOP_CHAR(info->tty);
1064         if (base_addr[CySCRL] != START_CHAR(info->tty))
1065                 base_addr[CySCRL] = START_CHAR(info->tty);
1066         if (base_addr[CySCRH] != START_CHAR(info->tty))
1067                 base_addr[CySCRH] = START_CHAR(info->tty);
1068         if (base_addr[CyCOR1] != info->cor1)
1069                 base_addr[CyCOR1] = info->cor1;
1070         if (base_addr[CyCOR2] != info->cor2)
1071                 base_addr[CyCOR2] = info->cor2;
1072         if (base_addr[CyCOR3] != info->cor3)
1073                 base_addr[CyCOR3] = info->cor3;
1074         if (base_addr[CyCOR4] != info->cor4)
1075                 base_addr[CyCOR4] = info->cor4;
1076         if (base_addr[CyCOR5] != info->cor5)
1077                 base_addr[CyCOR5] = info->cor5;
1078         if (base_addr[CyCOR6] != info->cor6)
1079                 base_addr[CyCOR6] = info->cor6;
1080         if (base_addr[CyCOR7] != info->cor7)
1081                 base_addr[CyCOR7] = info->cor7;
1082
1083         if (need_init_chan)
1084                 write_cy_cmd(base_addr, CyINIT_CHAN);
1085
1086         base_addr[CyCAR] = (u_char) channel;    /* !!! Is this needed? */
1087
1088         /* 2ms default rx timeout */
1089         ti = info->default_timeout ? info->default_timeout : 0x02;
1090         if (base_addr[CyRTPRL] != ti)
1091                 base_addr[CyRTPRL] = ti;
1092         if (base_addr[CyRTPRH] != 0)
1093                 base_addr[CyRTPRH] = 0;
1094
1095         /* Set up RTS here also ????? RGH 141095 */
1096         if (i == 0) {           /* baud rate is zero, turn off line */
1097                 if ((base_addr[CyMSVR2] & CyDTR) == CyDTR)
1098                         base_addr[CyMSVR2] = 0;
1099 #ifdef SERIAL_DEBUG_DTR
1100                 printk("cyc: %d: dropping DTR\n", __LINE__);
1101                 printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
1102                        base_addr[CyMSVR2]);
1103 #endif
1104         } else {
1105                 if ((base_addr[CyMSVR2] & CyDTR) != CyDTR)
1106                         base_addr[CyMSVR2] = CyDTR;
1107 #ifdef SERIAL_DEBUG_DTR
1108                 printk("cyc: %d: raising DTR\n", __LINE__);
1109                 printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
1110                        base_addr[CyMSVR2]);
1111 #endif
1112         }
1113
1114         if (info->tty) {
1115                 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1116         }
1117
1118         local_irq_restore(flags);
1119
1120 }                               /* config_setup */
1121
1122 static void cy_put_char(struct tty_struct *tty, unsigned char ch)
1123 {
1124         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1125         unsigned long flags;
1126
1127 #ifdef SERIAL_DEBUG_IO
1128         printk("cy_put_char %s(0x%02x)\n", tty->name, ch);
1129 #endif
1130
1131         if (serial_paranoia_check(info, tty->name, "cy_put_char"))
1132                 return;
1133
1134         if (!info->xmit_buf)
1135                 return;
1136
1137         local_irq_save(flags);
1138         if (info->xmit_cnt >= PAGE_SIZE - 1) {
1139                 local_irq_restore(flags);
1140                 return;
1141         }
1142
1143         info->xmit_buf[info->xmit_head++] = ch;
1144         info->xmit_head &= PAGE_SIZE - 1;
1145         info->xmit_cnt++;
1146         local_irq_restore(flags);
1147 }                               /* cy_put_char */
1148
1149 static void cy_flush_chars(struct tty_struct *tty)
1150 {
1151         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1152         unsigned long flags;
1153         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1154         int channel;
1155
1156 #ifdef SERIAL_DEBUG_IO
1157         printk("cy_flush_chars %s\n", tty->name);       /* */
1158 #endif
1159
1160         if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
1161                 return;
1162
1163         if (info->xmit_cnt <= 0 || tty->stopped
1164             || tty->hw_stopped || !info->xmit_buf)
1165                 return;
1166
1167         channel = info->line;
1168
1169         local_irq_save(flags);
1170         base_addr[CyCAR] = channel;
1171         base_addr[CyIER] |= CyTxMpty;
1172         local_irq_restore(flags);
1173 }                               /* cy_flush_chars */
1174
1175 /* This routine gets called when tty_write has put something into
1176     the write_queue.  If the port is not already transmitting stuff,
1177     start it off by enabling interrupts.  The interrupt service
1178     routine will then ensure that the characters are sent.  If the
1179     port is already active, there is no need to kick it.
1180  */
1181 static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
1182 {
1183         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1184         unsigned long flags;
1185         int c, total = 0;
1186
1187 #ifdef SERIAL_DEBUG_IO
1188         printk("cy_write %s\n", tty->name);     /* */
1189 #endif
1190
1191         if (serial_paranoia_check(info, tty->name, "cy_write")) {
1192                 return 0;
1193         }
1194
1195         if (!info->xmit_buf) {
1196                 return 0;
1197         }
1198
1199         while (1) {
1200                 local_irq_save(flags);
1201                 c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
1202                                           SERIAL_XMIT_SIZE - info->xmit_head));
1203                 if (c <= 0) {
1204                         local_irq_restore(flags);
1205                         break;
1206                 }
1207
1208                 memcpy(info->xmit_buf + info->xmit_head, buf, c);
1209                 info->xmit_head =
1210                     (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
1211                 info->xmit_cnt += c;
1212                 local_irq_restore(flags);
1213
1214                 buf += c;
1215                 count -= c;
1216                 total += c;
1217         }
1218
1219         if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
1220                 start_xmit(info);
1221         }
1222         return total;
1223 }                               /* cy_write */
1224
1225 static int cy_write_room(struct tty_struct *tty)
1226 {
1227         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1228         int ret;
1229
1230 #ifdef SERIAL_DEBUG_IO
1231         printk("cy_write_room %s\n", tty->name);        /* */
1232 #endif
1233
1234         if (serial_paranoia_check(info, tty->name, "cy_write_room"))
1235                 return 0;
1236         ret = PAGE_SIZE - info->xmit_cnt - 1;
1237         if (ret < 0)
1238                 ret = 0;
1239         return ret;
1240 }                               /* cy_write_room */
1241
1242 static int cy_chars_in_buffer(struct tty_struct *tty)
1243 {
1244         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1245
1246 #ifdef SERIAL_DEBUG_IO
1247         printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt);        /* */
1248 #endif
1249
1250         if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
1251                 return 0;
1252
1253         return info->xmit_cnt;
1254 }                               /* cy_chars_in_buffer */
1255
1256 static void cy_flush_buffer(struct tty_struct *tty)
1257 {
1258         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1259         unsigned long flags;
1260
1261 #ifdef SERIAL_DEBUG_IO
1262         printk("cy_flush_buffer %s\n", tty->name);      /* */
1263 #endif
1264
1265         if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
1266                 return;
1267         local_irq_save(flags);
1268         info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1269         local_irq_restore(flags);
1270         tty_wakeup(tty);
1271 }                               /* cy_flush_buffer */
1272
1273 /* This routine is called by the upper-layer tty layer to signal
1274    that incoming characters should be throttled or that the
1275    throttle should be released.
1276  */
1277 static void cy_throttle(struct tty_struct *tty)
1278 {
1279         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1280         unsigned long flags;
1281         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1282         int channel;
1283
1284 #ifdef SERIAL_DEBUG_THROTTLE
1285         char buf[64];
1286
1287         printk("throttle %s: %d....\n", tty_name(tty, buf),
1288                tty->ldisc.chars_in_buffer(tty));
1289         printk("cy_throttle %s\n", tty->name);
1290 #endif
1291
1292         if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
1293                 return;
1294         }
1295
1296         if (I_IXOFF(tty)) {
1297                 info->x_char = STOP_CHAR(tty);
1298                 /* Should use the "Send Special Character" feature!!! */
1299         }
1300
1301         channel = info->line;
1302
1303         local_irq_save(flags);
1304         base_addr[CyCAR] = (u_char) channel;
1305         base_addr[CyMSVR1] = 0;
1306         local_irq_restore(flags);
1307 }                               /* cy_throttle */
1308
1309 static void cy_unthrottle(struct tty_struct *tty)
1310 {
1311         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1312         unsigned long flags;
1313         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1314         int channel;
1315
1316 #ifdef SERIAL_DEBUG_THROTTLE
1317         char buf[64];
1318
1319         printk("throttle %s: %d....\n", tty_name(tty, buf),
1320                tty->ldisc.chars_in_buffer(tty));
1321         printk("cy_unthrottle %s\n", tty->name);
1322 #endif
1323
1324         if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
1325                 return;
1326         }
1327
1328         if (I_IXOFF(tty)) {
1329                 info->x_char = START_CHAR(tty);
1330                 /* Should use the "Send Special Character" feature!!! */
1331         }
1332
1333         channel = info->line;
1334
1335         local_irq_save(flags);
1336         base_addr[CyCAR] = (u_char) channel;
1337         base_addr[CyMSVR1] = CyRTS;
1338         local_irq_restore(flags);
1339 }                               /* cy_unthrottle */
1340
1341 static int
1342 get_serial_info(struct cyclades_port *info,
1343                 struct serial_struct __user * retinfo)
1344 {
1345         struct serial_struct tmp;
1346
1347 /* CP('g'); */
1348         if (!retinfo)
1349                 return -EFAULT;
1350         memset(&tmp, 0, sizeof(tmp));
1351         tmp.type = info->type;
1352         tmp.line = info->line;
1353         tmp.port = info->line;
1354         tmp.irq = 0;
1355         tmp.flags = info->flags;
1356         tmp.baud_base = 0;      /*!!! */
1357         tmp.close_delay = info->close_delay;
1358         tmp.custom_divisor = 0; /*!!! */
1359         tmp.hub6 = 0;           /*!!! */
1360         return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
1361 }                               /* get_serial_info */
1362
1363 static int
1364 set_serial_info(struct cyclades_port *info,
1365                 struct serial_struct __user * new_info)
1366 {
1367         struct serial_struct new_serial;
1368         struct cyclades_port old_info;
1369
1370 /* CP('s'); */
1371         if (!new_info)
1372                 return -EFAULT;
1373         if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
1374                 return -EFAULT;
1375         old_info = *info;
1376
1377         if (!capable(CAP_SYS_ADMIN)) {
1378                 if ((new_serial.close_delay != info->close_delay) ||
1379                     ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) !=
1380                      (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)))
1381                         return -EPERM;
1382                 info->flags = ((info->flags & ~ASYNC_USR_MASK) |
1383                                (new_serial.flags & ASYNC_USR_MASK));
1384                 goto check_and_exit;
1385         }
1386
1387         /*
1388          * OK, past this point, all the error checking has been done.
1389          * At this point, we start making changes.....
1390          */
1391
1392         info->flags = ((info->flags & ~ASYNC_FLAGS) |
1393                        (new_serial.flags & ASYNC_FLAGS));
1394         info->close_delay = new_serial.close_delay;
1395
1396 check_and_exit:
1397         if (info->flags & ASYNC_INITIALIZED) {
1398                 config_setup(info);
1399                 return 0;
1400         }
1401         return startup(info);
1402 }                               /* set_serial_info */
1403
1404 static int cy_tiocmget(struct tty_struct *tty, struct file *file)
1405 {
1406         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1407         int channel;
1408         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1409         unsigned long flags;
1410         unsigned char status;
1411
1412         channel = info->line;
1413
1414         local_irq_save(flags);
1415         base_addr[CyCAR] = (u_char) channel;
1416         status = base_addr[CyMSVR1] | base_addr[CyMSVR2];
1417         local_irq_restore(flags);
1418
1419         return ((status & CyRTS) ? TIOCM_RTS : 0)
1420             | ((status & CyDTR) ? TIOCM_DTR : 0)
1421             | ((status & CyDCD) ? TIOCM_CAR : 0)
1422             | ((status & CyDSR) ? TIOCM_DSR : 0)
1423             | ((status & CyCTS) ? TIOCM_CTS : 0);
1424 }                               /* cy_tiocmget */
1425
1426 static int
1427 cy_tiocmset(struct tty_struct *tty, struct file *file,
1428             unsigned int set, unsigned int clear)
1429 {
1430         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1431         int channel;
1432         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1433         unsigned long flags;
1434
1435         channel = info->line;
1436
1437         if (set & TIOCM_RTS) {
1438                 local_irq_save(flags);
1439                 base_addr[CyCAR] = (u_char) channel;
1440                 base_addr[CyMSVR1] = CyRTS;
1441                 local_irq_restore(flags);
1442         }
1443         if (set & TIOCM_DTR) {
1444                 local_irq_save(flags);
1445                 base_addr[CyCAR] = (u_char) channel;
1446 /* CP('S');CP('2'); */
1447                 base_addr[CyMSVR2] = CyDTR;
1448 #ifdef SERIAL_DEBUG_DTR
1449                 printk("cyc: %d: raising DTR\n", __LINE__);
1450                 printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
1451                        base_addr[CyMSVR2]);
1452 #endif
1453                 local_irq_restore(flags);
1454         }
1455
1456         if (clear & TIOCM_RTS) {
1457                 local_irq_save(flags);
1458                 base_addr[CyCAR] = (u_char) channel;
1459                 base_addr[CyMSVR1] = 0;
1460                 local_irq_restore(flags);
1461         }
1462         if (clear & TIOCM_DTR) {
1463                 local_irq_save(flags);
1464                 base_addr[CyCAR] = (u_char) channel;
1465 /* CP('C');CP('2'); */
1466                 base_addr[CyMSVR2] = 0;
1467 #ifdef SERIAL_DEBUG_DTR
1468                 printk("cyc: %d: dropping DTR\n", __LINE__);
1469                 printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
1470                        base_addr[CyMSVR2]);
1471 #endif
1472                 local_irq_restore(flags);
1473         }
1474
1475         return 0;
1476 }                               /* set_modem_info */
1477
1478 static void send_break(struct cyclades_port *info, int duration)
1479 {                               /* Let the transmit ISR take care of this (since it
1480                                    requires stuffing characters into the output stream).
1481                                  */
1482         info->x_break = duration;
1483         if (!info->xmit_cnt) {
1484                 start_xmit(info);
1485         }
1486 }                               /* send_break */
1487
1488 static int
1489 get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon)
1490 {
1491
1492         if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
1493                 return -EFAULT;
1494         info->mon.int_count = 0;
1495         info->mon.char_count = 0;
1496         info->mon.char_max = 0;
1497         info->mon.char_last = 0;
1498         return 0;
1499 }
1500
1501 static int set_threshold(struct cyclades_port *info, unsigned long __user * arg)
1502 {
1503         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1504         unsigned long value;
1505         int channel;
1506
1507         if (get_user(value, arg))
1508                 return -EFAULT;
1509
1510         channel = info->line;
1511         info->cor4 &= ~CyREC_FIFO;
1512         info->cor4 |= value & CyREC_FIFO;
1513         base_addr[CyCOR4] = info->cor4;
1514         return 0;
1515 }
1516
1517 static int
1518 get_threshold(struct cyclades_port *info, unsigned long __user * value)
1519 {
1520         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1521         int channel;
1522         unsigned long tmp;
1523
1524         channel = info->line;
1525
1526         tmp = base_addr[CyCOR4] & CyREC_FIFO;
1527         return put_user(tmp, value);
1528 }
1529
1530 static int
1531 set_default_threshold(struct cyclades_port *info, unsigned long __user * arg)
1532 {
1533         unsigned long value;
1534
1535         if (get_user(value, arg))
1536                 return -EFAULT;
1537
1538         info->default_threshold = value & 0x0f;
1539         return 0;
1540 }
1541
1542 static int
1543 get_default_threshold(struct cyclades_port *info, unsigned long __user * value)
1544 {
1545         return put_user(info->default_threshold, value);
1546 }
1547
1548 static int set_timeout(struct cyclades_port *info, unsigned long __user * arg)
1549 {
1550         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1551         int channel;
1552         unsigned long value;
1553
1554         if (get_user(value, arg))
1555                 return -EFAULT;
1556
1557         channel = info->line;
1558
1559         base_addr[CyRTPRL] = value & 0xff;
1560         base_addr[CyRTPRH] = (value >> 8) & 0xff;
1561         return 0;
1562 }
1563
1564 static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
1565 {
1566         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
1567         int channel;
1568         unsigned long tmp;
1569
1570         channel = info->line;
1571
1572         tmp = base_addr[CyRTPRL];
1573         return put_user(tmp, value);
1574 }
1575
1576 static int set_default_timeout(struct cyclades_port *info, unsigned long value)
1577 {
1578         info->default_timeout = value & 0xff;
1579         return 0;
1580 }
1581
1582 static int
1583 get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
1584 {
1585         return put_user(info->default_timeout, value);
1586 }
1587
1588 static int
1589 cy_ioctl(struct tty_struct *tty, struct file *file,
1590          unsigned int cmd, unsigned long arg)
1591 {
1592         unsigned long val;
1593         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1594         int ret_val = 0;
1595         void __user *argp = (void __user *)arg;
1596
1597 #ifdef SERIAL_DEBUG_OTHER
1598         printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg);       /* */
1599 #endif
1600
1601         switch (cmd) {
1602         case CYGETMON:
1603                 ret_val = get_mon_info(info, argp);
1604                 break;
1605         case CYGETTHRESH:
1606                 ret_val = get_threshold(info, argp);
1607                 break;
1608         case CYSETTHRESH:
1609                 ret_val = set_threshold(info, argp);
1610                 break;
1611         case CYGETDEFTHRESH:
1612                 ret_val = get_default_threshold(info, argp);
1613                 break;
1614         case CYSETDEFTHRESH:
1615                 ret_val = set_default_threshold(info, argp);
1616                 break;
1617         case CYGETTIMEOUT:
1618                 ret_val = get_timeout(info, argp);
1619                 break;
1620         case CYSETTIMEOUT:
1621                 ret_val = set_timeout(info, argp);
1622                 break;
1623         case CYGETDEFTIMEOUT:
1624                 ret_val = get_default_timeout(info, argp);
1625                 break;
1626         case CYSETDEFTIMEOUT:
1627                 ret_val = set_default_timeout(info, (unsigned long)arg);
1628                 break;
1629         case TCSBRK:            /* SVID version: non-zero arg --> no break */
1630                 ret_val = tty_check_change(tty);
1631                 if (ret_val)
1632                         break;
1633                 tty_wait_until_sent(tty, 0);
1634                 if (!arg)
1635                         send_break(info, HZ / 4);       /* 1/4 second */
1636                 break;
1637         case TCSBRKP:           /* support for POSIX tcsendbreak() */
1638                 ret_val = tty_check_change(tty);
1639                 if (ret_val)
1640                         break;
1641                 tty_wait_until_sent(tty, 0);
1642                 send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
1643                 break;
1644
1645 /* The following commands are incompletely implemented!!! */
1646         case TIOCGSOFTCAR:
1647                 ret_val =
1648                     put_user(C_CLOCAL(tty) ? 1 : 0,
1649                              (unsigned long __user *)argp);
1650                 break;
1651         case TIOCSSOFTCAR:
1652                 ret_val = get_user(val, (unsigned long __user *)argp);
1653                 if (ret_val)
1654                         break;
1655                 tty->termios->c_cflag =
1656                     ((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0));
1657                 break;
1658         case TIOCGSERIAL:
1659                 ret_val = get_serial_info(info, argp);
1660                 break;
1661         case TIOCSSERIAL:
1662                 ret_val = set_serial_info(info, argp);
1663                 break;
1664         default:
1665                 ret_val = -ENOIOCTLCMD;
1666         }
1667
1668 #ifdef SERIAL_DEBUG_OTHER
1669         printk("cy_ioctl done\n");
1670 #endif
1671
1672         return ret_val;
1673 }                               /* cy_ioctl */
1674
1675 static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1676 {
1677         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1678
1679 #ifdef SERIAL_DEBUG_OTHER
1680         printk("cy_set_termios %s\n", tty->name);
1681 #endif
1682
1683         if (tty->termios->c_cflag == old_termios->c_cflag)
1684                 return;
1685         config_setup(info);
1686
1687         if ((old_termios->c_cflag & CRTSCTS) &&
1688             !(tty->termios->c_cflag & CRTSCTS)) {
1689                 tty->stopped = 0;
1690                 cy_start(tty);
1691         }
1692 #ifdef tytso_patch_94Nov25_1726
1693         if (!(old_termios->c_cflag & CLOCAL) &&
1694             (tty->termios->c_cflag & CLOCAL))
1695                 wake_up_interruptible(&info->open_wait);
1696 #endif
1697 }                               /* cy_set_termios */
1698
1699 static void cy_close(struct tty_struct *tty, struct file *filp)
1700 {
1701         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1702
1703 /* CP('C'); */
1704 #ifdef SERIAL_DEBUG_OTHER
1705         printk("cy_close %s\n", tty->name);
1706 #endif
1707
1708         if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
1709                 return;
1710         }
1711 #ifdef SERIAL_DEBUG_OPEN
1712         printk("cy_close %s, count = %d\n", tty->name, info->count);
1713 #endif
1714
1715         if ((tty->count == 1) && (info->count != 1)) {
1716                 /*
1717                  * Uh, oh.  tty->count is 1, which means that the tty
1718                  * structure will be freed.  Info->count should always
1719                  * be one in these conditions.  If it's greater than
1720                  * one, we've got real problems, since it means the
1721                  * serial port won't be shutdown.
1722                  */
1723                 printk("cy_close: bad serial port count; tty->count is 1, "
1724                        "info->count is %d\n", info->count);
1725                 info->count = 1;
1726         }
1727 #ifdef SERIAL_DEBUG_COUNT
1728         printk("cyc: %d: decrementing count to %d\n", __LINE__,
1729                info->count - 1);
1730 #endif
1731         if (--info->count < 0) {
1732                 printk("cy_close: bad serial port count for ttys%d: %d\n",
1733                        info->line, info->count);
1734 #ifdef SERIAL_DEBUG_COUNT
1735                 printk("cyc: %d: setting count to 0\n", __LINE__);
1736 #endif
1737                 info->count = 0;
1738         }
1739         if (info->count)
1740                 return;
1741         info->flags |= ASYNC_CLOSING;
1742         if (info->flags & ASYNC_INITIALIZED)
1743                 tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
1744         shutdown(info);
1745         if (tty->driver->flush_buffer)
1746                 tty->driver->flush_buffer(tty);
1747         tty_ldisc_flush(tty);
1748         info->event = 0;
1749         info->tty = NULL;
1750         if (info->blocked_open) {
1751                 if (info->close_delay) {
1752                         msleep_interruptible(jiffies_to_msecs
1753                                              (info->close_delay));
1754                 }
1755                 wake_up_interruptible(&info->open_wait);
1756         }
1757         info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
1758         wake_up_interruptible(&info->close_wait);
1759
1760 #ifdef SERIAL_DEBUG_OTHER
1761         printk("cy_close done\n");
1762 #endif
1763 }                               /* cy_close */
1764
1765 /*
1766  * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
1767  */
1768 void cy_hangup(struct tty_struct *tty)
1769 {
1770         struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
1771
1772 #ifdef SERIAL_DEBUG_OTHER
1773         printk("cy_hangup %s\n", tty->name);    /* */
1774 #endif
1775
1776         if (serial_paranoia_check(info, tty->name, "cy_hangup"))
1777                 return;
1778
1779         shutdown(info);
1780 #if 0
1781         info->event = 0;
1782         info->count = 0;
1783 #ifdef SERIAL_DEBUG_COUNT
1784         printk("cyc: %d: setting count to 0\n", __LINE__);
1785 #endif
1786         info->tty = 0;
1787 #endif
1788         info->flags &= ~ASYNC_NORMAL_ACTIVE;
1789         wake_up_interruptible(&info->open_wait);
1790 }                               /* cy_hangup */
1791
1792 /*
1793  * ------------------------------------------------------------
1794  * cy_open() and friends
1795  * ------------------------------------------------------------
1796  */
1797
1798 static int
1799 block_til_ready(struct tty_struct *tty, struct file *filp,
1800                 struct cyclades_port *info)
1801 {
1802         DECLARE_WAITQUEUE(wait, current);
1803         unsigned long flags;
1804         int channel;
1805         int retval;
1806         volatile u_char *base_addr = (u_char *) BASE_ADDR;
1807
1808         /*
1809          * If the device is in the middle of being closed, then block
1810          * until it's done, and then try again.
1811          */
1812         if (info->flags & ASYNC_CLOSING) {
1813                 interruptible_sleep_on(&info->close_wait);
1814                 if (info->flags & ASYNC_HUP_NOTIFY) {
1815                         return -EAGAIN;
1816                 } else {
1817                         return -ERESTARTSYS;
1818                 }
1819         }
1820
1821         /*
1822          * If non-blocking mode is set, then make the check up front
1823          * and then exit.
1824          */
1825         if (filp->f_flags & O_NONBLOCK) {
1826                 info->flags |= ASYNC_NORMAL_ACTIVE;
1827                 return 0;
1828         }
1829
1830         /*
1831          * Block waiting for the carrier detect and the line to become
1832          * free (i.e., not in use by the callout).  While we are in
1833          * this loop, info->count is dropped by one, so that
1834          * cy_close() knows when to free things.  We restore it upon
1835          * exit, either normal or abnormal.
1836          */
1837         retval = 0;
1838         add_wait_queue(&info->open_wait, &wait);
1839 #ifdef SERIAL_DEBUG_OPEN
1840         printk("block_til_ready before block: %s, count = %d\n",
1841                tty->name, info->count);
1842         /**/
1843 #endif
1844             info->count--;
1845 #ifdef SERIAL_DEBUG_COUNT
1846         printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count);
1847 #endif
1848         info->blocked_open++;
1849
1850         channel = info->line;
1851
1852         while (1) {
1853                 local_irq_save(flags);
1854                 base_addr[CyCAR] = (u_char) channel;
1855                 base_addr[CyMSVR1] = CyRTS;
1856 /* CP('S');CP('4'); */
1857                 base_addr[CyMSVR2] = CyDTR;
1858 #ifdef SERIAL_DEBUG_DTR
1859                 printk("cyc: %d: raising DTR\n", __LINE__);
1860                 printk("     status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
1861                        base_addr[CyMSVR2]);
1862 #endif
1863                 local_irq_restore(flags);
1864                 set_current_state(TASK_INTERRUPTIBLE);
1865                 if (tty_hung_up_p(filp)
1866                     || !(info->flags & ASYNC_INITIALIZED)) {
1867                         if (info->flags & ASYNC_HUP_NOTIFY) {
1868                                 retval = -EAGAIN;
1869                         } else {
1870                                 retval = -ERESTARTSYS;
1871                         }
1872                         break;
1873                 }
1874                 local_irq_save(flags);
1875                 base_addr[CyCAR] = (u_char) channel;
1876 /* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */
1877                 if (!(info->flags & ASYNC_CLOSING)
1878                     && (C_CLOCAL(tty)
1879                         || (base_addr[CyMSVR1] & CyDCD))) {
1880                         local_irq_restore(flags);
1881                         break;
1882                 }
1883                 local_irq_restore(flags);
1884                 if (signal_pending(current)) {
1885                         retval = -ERESTARTSYS;
1886                         break;
1887                 }
1888 #ifdef SERIAL_DEBUG_OPEN
1889                 printk("block_til_ready blocking: %s, count = %d\n",
1890                        tty->name, info->count);
1891                 /**/
1892 #endif
1893                     schedule();
1894         }
1895         current->state = TASK_RUNNING;
1896         remove_wait_queue(&info->open_wait, &wait);
1897         if (!tty_hung_up_p(filp)) {
1898                 info->count++;
1899 #ifdef SERIAL_DEBUG_COUNT
1900                 printk("cyc: %d: incrementing count to %d\n", __LINE__,
1901                        info->count);
1902 #endif
1903         }
1904         info->blocked_open--;
1905 #ifdef SERIAL_DEBUG_OPEN
1906         printk("block_til_ready after blocking: %s, count = %d\n",
1907                tty->name, info->count);
1908         /**/
1909 #endif
1910             if (retval)
1911                 return retval;
1912         info->flags |= ASYNC_NORMAL_ACTIVE;
1913         return 0;
1914 }                               /* block_til_ready */
1915
1916 /*
1917  * This routine is called whenever a serial port is opened.  It
1918  * performs the serial-specific initialization for the tty structure.
1919  */
1920 int cy_open(struct tty_struct *tty, struct file *filp)
1921 {
1922         struct cyclades_port *info;
1923         int retval, line;
1924
1925 /* CP('O'); */
1926         line = tty->index;
1927         if ((line < 0) || (NR_PORTS <= line)) {
1928                 return -ENODEV;
1929         }
1930         info = &cy_port[line];
1931         if (info->line < 0) {
1932                 return -ENODEV;
1933         }
1934 #ifdef SERIAL_DEBUG_OTHER
1935         printk("cy_open %s\n", tty->name);      /* */
1936 #endif
1937         if (serial_paranoia_check(info, tty->name, "cy_open")) {
1938                 return -ENODEV;
1939         }
1940 #ifdef SERIAL_DEBUG_OPEN
1941         printk("cy_open %s, count = %d\n", tty->name, info->count);
1942         /**/
1943 #endif
1944             info->count++;
1945 #ifdef SERIAL_DEBUG_COUNT
1946         printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count);
1947 #endif
1948         tty->driver_data = info;
1949         info->tty = tty;
1950
1951         /*
1952          * Start up serial port
1953          */
1954         retval = startup(info);
1955         if (retval) {
1956                 return retval;
1957         }
1958
1959         retval = block_til_ready(tty, filp, info);
1960         if (retval) {
1961 #ifdef SERIAL_DEBUG_OPEN
1962                 printk("cy_open returning after block_til_ready with %d\n",
1963                        retval);
1964 #endif
1965                 return retval;
1966         }
1967 #ifdef SERIAL_DEBUG_OPEN
1968         printk("cy_open done\n");
1969         /**/
1970 #endif
1971             return 0;
1972 }                               /* cy_open */
1973
1974 /*
1975  * ---------------------------------------------------------------------
1976  * serial167_init() and friends
1977  *
1978  * serial167_init() is called at boot-time to initialize the serial driver.
1979  * ---------------------------------------------------------------------
1980  */
1981
1982 /*
1983  * This routine prints out the appropriate serial driver version
1984  * number, and identifies which options were configured into this
1985  * driver.
1986  */
1987 static void show_version(void)
1988 {
1989         printk("MVME166/167 cd2401 driver\n");
1990 }                               /* show_version */
1991
1992 /* initialize chips on card -- return number of valid
1993    chips (which is number of ports/4) */
1994
1995 /*
1996  * This initialises the hardware to a reasonable state.  It should
1997  * probe the chip first so as to copy 166-Bug setup as a default for
1998  * port 0.  It initialises CMR to CyASYNC; that is never done again, so
1999  * as to limit the number of CyINIT_CHAN commands in normal running.
2000  *
2001  * ... I wonder what I should do if this fails ...
2002  */
2003
2004 void mvme167_serial_console_setup(int cflag)
2005 {
2006         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
2007         int ch;
2008         u_char spd;
2009         u_char rcor, rbpr, badspeed = 0;
2010         unsigned long flags;
2011
2012         local_irq_save(flags);
2013
2014         /*
2015          * First probe channel zero of the chip, to see what speed has
2016          * been selected.
2017          */
2018
2019         base_addr[CyCAR] = 0;
2020
2021         rcor = base_addr[CyRCOR] << 5;
2022         rbpr = base_addr[CyRBPR];
2023
2024         for (spd = 0; spd < sizeof(baud_bpr); spd++)
2025                 if (rbpr == baud_bpr[spd] && rcor == baud_co[spd])
2026                         break;
2027         if (spd >= sizeof(baud_bpr)) {
2028                 spd = 14;       /* 19200 */
2029                 badspeed = 1;   /* Failed to identify speed */
2030         }
2031         initial_console_speed = spd;
2032
2033         /* OK, we have chosen a speed, now reset and reinitialise */
2034
2035         my_udelay(20000L);      /* Allow time for any active o/p to complete */
2036         if (base_addr[CyCCR] != 0x00) {
2037                 local_irq_restore(flags);
2038                 /* printk(" chip is never idle (CCR != 0)\n"); */
2039                 return;
2040         }
2041
2042         base_addr[CyCCR] = CyCHIP_RESET;        /* Reset the chip */
2043         my_udelay(1000L);
2044
2045         if (base_addr[CyGFRCR] == 0x00) {
2046                 local_irq_restore(flags);
2047                 /* printk(" chip is not responding (GFRCR stayed 0)\n"); */
2048                 return;
2049         }
2050
2051         /*
2052          * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms
2053          * tick
2054          */
2055
2056         base_addr[CyTPR] = 10;
2057
2058         base_addr[CyPILR1] = 0x01;      /* Interrupt level for modem change */
2059         base_addr[CyPILR2] = 0x02;      /* Interrupt level for tx ints */
2060         base_addr[CyPILR3] = 0x03;      /* Interrupt level for rx ints */
2061
2062         /*
2063          * Attempt to set up all channels to something reasonable, and
2064          * bang out a INIT_CHAN command.  We should then be able to limit
2065          * the ammount of fiddling we have to do in normal running.
2066          */
2067
2068         for (ch = 3; ch >= 0; ch--) {
2069                 base_addr[CyCAR] = (u_char) ch;
2070                 base_addr[CyIER] = 0;
2071                 base_addr[CyCMR] = CyASYNC;
2072                 base_addr[CyLICR] = (u_char) ch << 2;
2073                 base_addr[CyLIVR] = 0x5c;
2074                 base_addr[CyTCOR] = baud_co[spd];
2075                 base_addr[CyTBPR] = baud_bpr[spd];
2076                 base_addr[CyRCOR] = baud_co[spd] >> 5;
2077                 base_addr[CyRBPR] = baud_bpr[spd];
2078                 base_addr[CySCHR1] = 'Q' & 0x1f;
2079                 base_addr[CySCHR2] = 'X' & 0x1f;
2080                 base_addr[CySCRL] = 0;
2081                 base_addr[CySCRH] = 0;
2082                 base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
2083                 base_addr[CyCOR2] = 0;
2084                 base_addr[CyCOR3] = Cy_1_STOP;
2085                 base_addr[CyCOR4] = baud_cor4[spd];
2086                 base_addr[CyCOR5] = 0;
2087                 base_addr[CyCOR6] = 0;
2088                 base_addr[CyCOR7] = 0;
2089                 base_addr[CyRTPRL] = 2;
2090                 base_addr[CyRTPRH] = 0;
2091                 base_addr[CyMSVR1] = 0;
2092                 base_addr[CyMSVR2] = 0;
2093                 write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR);
2094         }
2095
2096         /*
2097          * Now do specials for channel zero....
2098          */
2099
2100         base_addr[CyMSVR1] = CyRTS;
2101         base_addr[CyMSVR2] = CyDTR;
2102         base_addr[CyIER] = CyRxData;
2103         write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
2104
2105         local_irq_restore(flags);
2106
2107         my_udelay(20000L);      /* Let it all settle down */
2108
2109         printk("CD2401 initialised,  chip is rev 0x%02x\n", base_addr[CyGFRCR]);
2110         if (badspeed)
2111                 printk
2112                     ("  WARNING:  Failed to identify line speed, rcor=%02x,rbpr=%02x\n",
2113                      rcor >> 5, rbpr);
2114 }                               /* serial_console_init */
2115
2116 static const struct tty_operations cy_ops = {
2117         .open = cy_open,
2118         .close = cy_close,
2119         .write = cy_write,
2120         .put_char = cy_put_char,
2121         .flush_chars = cy_flush_chars,
2122         .write_room = cy_write_room,
2123         .chars_in_buffer = cy_chars_in_buffer,
2124         .flush_buffer = cy_flush_buffer,
2125         .ioctl = cy_ioctl,
2126         .throttle = cy_throttle,
2127         .unthrottle = cy_unthrottle,
2128         .set_termios = cy_set_termios,
2129         .stop = cy_stop,
2130         .start = cy_start,
2131         .hangup = cy_hangup,
2132         .tiocmget = cy_tiocmget,
2133         .tiocmset = cy_tiocmset,
2134 };
2135
2136 /* The serial driver boot-time initialization code!
2137     Hardware I/O ports are mapped to character special devices on a
2138     first found, first allocated manner.  That is, this code searches
2139     for Cyclom cards in the system.  As each is found, it is probed
2140     to discover how many chips (and thus how many ports) are present.
2141     These ports are mapped to the tty ports 64 and upward in monotonic
2142     fashion.  If an 8-port card is replaced with a 16-port card, the
2143     port mapping on a following card will shift.
2144
2145     This approach is different from what is used in the other serial
2146     device driver because the Cyclom is more properly a multiplexer,
2147     not just an aggregation of serial ports on one card.
2148
2149     If there are more cards with more ports than have been statically
2150     allocated above, a warning is printed and the extra ports are ignored.
2151  */
2152 static int __init serial167_init(void)
2153 {
2154         struct cyclades_port *info;
2155         int ret = 0;
2156         int good_ports = 0;
2157         int port_num = 0;
2158         int index;
2159         int DefSpeed;
2160 #ifdef notyet
2161         struct sigaction sa;
2162 #endif
2163
2164         if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401))
2165                 return 0;
2166
2167         cy_serial_driver = alloc_tty_driver(NR_PORTS);
2168         if (!cy_serial_driver)
2169                 return -ENOMEM;
2170
2171 #if 0
2172         scrn[1] = '\0';
2173 #endif
2174
2175         show_version();
2176
2177         /* Has "console=0,9600n8" been used in bootinfo to change speed? */
2178         if (serial_console_cflag)
2179                 DefSpeed = serial_console_cflag & 0017;
2180         else {
2181                 DefSpeed = initial_console_speed;
2182                 serial_console_info = &cy_port[0];
2183                 serial_console_cflag = DefSpeed | CS8;
2184 #if 0
2185                 serial_console = 64;    /*callout_driver.minor_start */
2186 #endif
2187         }
2188
2189         /* Initialize the tty_driver structure */
2190
2191         cy_serial_driver->owner = THIS_MODULE;
2192         cy_serial_driver->name = "ttyS";
2193         cy_serial_driver->major = TTY_MAJOR;
2194         cy_serial_driver->minor_start = 64;
2195         cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
2196         cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
2197         cy_serial_driver->init_termios = tty_std_termios;
2198         cy_serial_driver->init_termios.c_cflag =
2199             B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2200         cy_serial_driver->flags = TTY_DRIVER_REAL_RAW;
2201         tty_set_operations(cy_serial_driver, &cy_ops);
2202
2203         ret = tty_register_driver(cy_serial_driver);
2204         if (ret) {
2205                 printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n");
2206                 put_tty_driver(cy_serial_driver);
2207                 return ret;
2208         }
2209
2210         port_num = 0;
2211         info = cy_port;
2212         for (index = 0; index < 1; index++) {
2213
2214                 good_ports = 4;
2215
2216                 if (port_num < NR_PORTS) {
2217                         while (good_ports-- && port_num < NR_PORTS) {
2218                 /*** initialize port ***/
2219                                 info->magic = CYCLADES_MAGIC;
2220                                 info->type = PORT_CIRRUS;
2221                                 info->card = index;
2222                                 info->line = port_num;
2223                                 info->flags = STD_COM_FLAGS;
2224                                 info->tty = NULL;
2225                                 info->xmit_fifo_size = 12;
2226                                 info->cor1 = CyPARITY_NONE | Cy_8_BITS;
2227                                 info->cor2 = CyETC;
2228                                 info->cor3 = Cy_1_STOP;
2229                                 info->cor4 = 0x08;      /* _very_ small receive threshold */
2230                                 info->cor5 = 0;
2231                                 info->cor6 = 0;
2232                                 info->cor7 = 0;
2233                                 info->tbpr = baud_bpr[DefSpeed];        /* Tx BPR */
2234                                 info->tco = baud_co[DefSpeed];  /* Tx CO */
2235                                 info->rbpr = baud_bpr[DefSpeed];        /* Rx BPR */
2236                                 info->rco = baud_co[DefSpeed] >> 5;     /* Rx CO */
2237                                 info->close_delay = 0;
2238                                 info->x_char = 0;
2239                                 info->event = 0;
2240                                 info->count = 0;
2241 #ifdef SERIAL_DEBUG_COUNT
2242                                 printk("cyc: %d: setting count to 0\n",
2243                                        __LINE__);
2244 #endif
2245                                 info->blocked_open = 0;
2246                                 info->default_threshold = 0;
2247                                 info->default_timeout = 0;
2248                                 INIT_WORK(&info->tqueue, do_softint);
2249                                 init_waitqueue_head(&info->open_wait);
2250                                 init_waitqueue_head(&info->close_wait);
2251                                 /* info->session */
2252                                 /* info->pgrp */
2253 /*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/
2254                                 info->read_status_mask =
2255                                     CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY |
2256                                     CyFRAME | CyOVERRUN;
2257                                 /* info->timeout */
2258
2259                                 printk("ttyS%d ", info->line);
2260                                 port_num++;
2261                                 info++;
2262                                 if (!(port_num & 7)) {
2263                                         printk("\n               ");
2264                                 }
2265                         }
2266                 }
2267                 printk("\n");
2268         }
2269         while (port_num < NR_PORTS) {
2270                 info->line = -1;
2271                 port_num++;
2272                 info++;
2273         }
2274 #ifdef CONFIG_REMOTE_DEBUG
2275         debug_setup();
2276 #endif
2277         ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
2278                           "cd2401_errors", cd2401_rxerr_interrupt);
2279         if (ret) {
2280                 printk(KERN_ERR "Could't get cd2401_errors IRQ");
2281                 goto cleanup_serial_driver;
2282         }
2283
2284         ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0,
2285                           "cd2401_modem", cd2401_modem_interrupt);
2286         if (ret) {
2287                 printk(KERN_ERR "Could't get cd2401_modem IRQ");
2288                 goto cleanup_irq_cd2401_errors;
2289         }
2290
2291         ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0,
2292                           "cd2401_txints", cd2401_tx_interrupt);
2293         if (ret) {
2294                 printk(KERN_ERR "Could't get cd2401_txints IRQ");
2295                 goto cleanup_irq_cd2401_modem;
2296         }
2297
2298         ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0,
2299                           "cd2401_rxints", cd2401_rx_interrupt);
2300         if (ret) {
2301                 printk(KERN_ERR "Could't get cd2401_rxints IRQ");
2302                 goto cleanup_irq_cd2401_txints;
2303         }
2304
2305         /* Now we have registered the interrupt handlers, allow the interrupts */
2306
2307         pcc2chip[PccSCCMICR] = 0x15;    /* Serial ints are level 5 */
2308         pcc2chip[PccSCCTICR] = 0x15;
2309         pcc2chip[PccSCCRICR] = 0x15;
2310
2311         pcc2chip[PccIMLR] = 3;  /* Allow PCC2 ints above 3!? */
2312
2313         return 0;
2314 cleanup_irq_cd2401_txints:
2315         free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt);
2316 cleanup_irq_cd2401_modem:
2317         free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt);
2318 cleanup_irq_cd2401_errors:
2319         free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt);
2320 cleanup_serial_driver:
2321         if (tty_unregister_driver(cy_serial_driver))
2322                 printk(KERN_ERR
2323                        "Couldn't unregister MVME166/7 serial driver\n");
2324         put_tty_driver(cy_serial_driver);
2325         return ret;
2326 }                               /* serial167_init */
2327
2328 module_init(serial167_init);
2329
2330 #ifdef CYCLOM_SHOW_STATUS
2331 static void show_status(int line_num)
2332 {
2333         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
2334         int channel;
2335         struct cyclades_port *info;
2336         unsigned long flags;
2337
2338         info = &cy_port[line_num];
2339         channel = info->line;
2340         printk("  channel %d\n", channel);
2341         /**/ printk(" cy_port\n");
2342         printk("  card line flags = %d %d %x\n",
2343                info->card, info->line, info->flags);
2344         printk
2345             ("  *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n",
2346              (long)info->tty, info->read_status_mask, info->timeout,
2347              info->xmit_fifo_size);
2348         printk("  cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n",
2349                info->cor1, info->cor2, info->cor3, info->cor4, info->cor5,
2350                info->cor6, info->cor7);
2351         printk("  tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco,
2352                info->rbpr, info->rco);
2353         printk("  close_delay event count = %d %d %d\n", info->close_delay,
2354                info->event, info->count);
2355         printk("  x_char blocked_open = %x %x\n", info->x_char,
2356                info->blocked_open);
2357         printk("  open_wait = %lx %lx %lx\n", (long)info->open_wait);
2358
2359         local_irq_save(flags);
2360
2361 /* Global Registers */
2362
2363         printk(" CyGFRCR %x\n", base_addr[CyGFRCR]);
2364         printk(" CyCAR %x\n", base_addr[CyCAR]);
2365         printk(" CyRISR %x\n", base_addr[CyRISR]);
2366         printk(" CyTISR %x\n", base_addr[CyTISR]);
2367         printk(" CyMISR %x\n", base_addr[CyMISR]);
2368         printk(" CyRIR %x\n", base_addr[CyRIR]);
2369         printk(" CyTIR %x\n", base_addr[CyTIR]);
2370         printk(" CyMIR %x\n", base_addr[CyMIR]);
2371         printk(" CyTPR %x\n", base_addr[CyTPR]);
2372
2373         base_addr[CyCAR] = (u_char) channel;
2374
2375 /* Virtual Registers */
2376
2377 #if 0
2378         printk(" CyRIVR %x\n", base_addr[CyRIVR]);
2379         printk(" CyTIVR %x\n", base_addr[CyTIVR]);
2380         printk(" CyMIVR %x\n", base_addr[CyMIVR]);
2381         printk(" CyMISR %x\n", base_addr[CyMISR]);
2382 #endif
2383
2384 /* Channel Registers */
2385
2386         printk(" CyCCR %x\n", base_addr[CyCCR]);
2387         printk(" CyIER %x\n", base_addr[CyIER]);
2388         printk(" CyCOR1 %x\n", base_addr[CyCOR1]);
2389         printk(" CyCOR2 %x\n", base_addr[CyCOR2]);
2390         printk(" CyCOR3 %x\n", base_addr[CyCOR3]);
2391         printk(" CyCOR4 %x\n", base_addr[CyCOR4]);
2392         printk(" CyCOR5 %x\n", base_addr[CyCOR5]);
2393 #if 0
2394         printk(" CyCCSR %x\n", base_addr[CyCCSR]);
2395         printk(" CyRDCR %x\n", base_addr[CyRDCR]);
2396 #endif
2397         printk(" CySCHR1 %x\n", base_addr[CySCHR1]);
2398         printk(" CySCHR2 %x\n", base_addr[CySCHR2]);
2399 #if 0
2400         printk(" CySCHR3 %x\n", base_addr[CySCHR3]);
2401         printk(" CySCHR4 %x\n", base_addr[CySCHR4]);
2402         printk(" CySCRL %x\n", base_addr[CySCRL]);
2403         printk(" CySCRH %x\n", base_addr[CySCRH]);
2404         printk(" CyLNC %x\n", base_addr[CyLNC]);
2405         printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]);
2406         printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]);
2407 #endif
2408         printk(" CyRTPRL %x\n", base_addr[CyRTPRL]);
2409         printk(" CyRTPRH %x\n", base_addr[CyRTPRH]);
2410         printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]);
2411         printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]);
2412         printk(" CyRBPR %x\n", base_addr[CyRBPR]);
2413         printk(" CyRCOR %x\n", base_addr[CyRCOR]);
2414         printk(" CyTBPR %x\n", base_addr[CyTBPR]);
2415         printk(" CyTCOR %x\n", base_addr[CyTCOR]);
2416
2417         local_irq_restore(flags);
2418 }                               /* show_status */
2419 #endif
2420
2421 #if 0
2422 /* Dummy routine in mvme16x/config.c for now */
2423
2424 /* Serial console setup. Called from linux/init/main.c */
2425
2426 void console_setup(char *str, int *ints)
2427 {
2428         char *s;
2429         int baud, bits, parity;
2430         int cflag = 0;
2431
2432         /* Sanity check. */
2433         if (ints[0] > 3 || ints[1] > 3)
2434                 return;
2435
2436         /* Get baud, bits and parity */
2437         baud = 2400;
2438         bits = 8;
2439         parity = 'n';
2440         if (ints[2])
2441                 baud = ints[2];
2442         if ((s = strchr(str, ','))) {
2443                 do {
2444                         s++;
2445                 } while (*s >= '0' && *s <= '9');
2446                 if (*s)
2447                         parity = *s++;
2448                 if (*s)
2449                         bits = *s - '0';
2450         }
2451
2452         /* Now construct a cflag setting. */
2453         switch (baud) {
2454         case 1200:
2455                 cflag |= B1200;
2456                 break;
2457         case 9600:
2458                 cflag |= B9600;
2459                 break;
2460         case 19200:
2461                 cflag |= B19200;
2462                 break;
2463         case 38400:
2464                 cflag |= B38400;
2465                 break;
2466         case 2400:
2467         default:
2468                 cflag |= B2400;
2469                 break;
2470         }
2471         switch (bits) {
2472         case 7:
2473                 cflag |= CS7;
2474                 break;
2475         default:
2476         case 8:
2477                 cflag |= CS8;
2478                 break;
2479         }
2480         switch (parity) {
2481         case 'o':
2482         case 'O':
2483                 cflag |= PARODD;
2484                 break;
2485         case 'e':
2486         case 'E':
2487                 cflag |= PARENB;
2488                 break;
2489         }
2490
2491         serial_console_info = &cy_port[ints[1]];
2492         serial_console_cflag = cflag;
2493         serial_console = ints[1] + 64;  /*callout_driver.minor_start */
2494 }
2495 #endif
2496
2497 /*
2498  * The following is probably out of date for 2.1.x serial console stuff.
2499  *
2500  * The console is registered early on from arch/m68k/kernel/setup.c, and
2501  * it therefore relies on the chip being setup correctly by 166-Bug.  This
2502  * seems reasonable, as the serial port has been used to invoke the system
2503  * boot.  It also means that this function must not rely on any data
2504  * initialisation performed by serial167_init() etc.
2505  *
2506  * Of course, once the console has been registered, we had better ensure
2507  * that serial167_init() doesn't leave the chip non-functional.
2508  *
2509  * The console must be locked when we get here.
2510  */
2511
2512 void serial167_console_write(struct console *co, const char *str,
2513                              unsigned count)
2514 {
2515         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
2516         unsigned long flags;
2517         volatile u_char sink;
2518         u_char ier;
2519         int port;
2520         u_char do_lf = 0;
2521         int i = 0;
2522
2523         local_irq_save(flags);
2524
2525         /* Ensure transmitter is enabled! */
2526
2527         port = 0;
2528         base_addr[CyCAR] = (u_char) port;
2529         while (base_addr[CyCCR])
2530                 ;
2531         base_addr[CyCCR] = CyENB_XMTR;
2532
2533         ier = base_addr[CyIER];
2534         base_addr[CyIER] = CyTxMpty;
2535
2536         while (1) {
2537                 if (pcc2chip[PccSCCTICR] & 0x20) {
2538                         /* We have a Tx int. Acknowledge it */
2539                         sink = pcc2chip[PccTPIACKR];
2540                         if ((base_addr[CyLICR] >> 2) == port) {
2541                                 if (i == count) {
2542                                         /* Last char of string is now output */
2543                                         base_addr[CyTEOIR] = CyNOTRANS;
2544                                         break;
2545                                 }
2546                                 if (do_lf) {
2547                                         base_addr[CyTDR] = '\n';
2548                                         str++;
2549                                         i++;
2550                                         do_lf = 0;
2551                                 } else if (*str == '\n') {
2552                                         base_addr[CyTDR] = '\r';
2553                                         do_lf = 1;
2554                                 } else {
2555                                         base_addr[CyTDR] = *str++;
2556                                         i++;
2557                                 }
2558                                 base_addr[CyTEOIR] = 0;
2559                         } else
2560                                 base_addr[CyTEOIR] = CyNOTRANS;
2561                 }
2562         }
2563
2564         base_addr[CyIER] = ier;
2565
2566         local_irq_restore(flags);
2567 }
2568
2569 static struct tty_driver *serial167_console_device(struct console *c,
2570                                                    int *index)
2571 {
2572         *index = c->index;
2573         return cy_serial_driver;
2574 }
2575
2576 static int __init serial167_console_setup(struct console *co, char *options)
2577 {
2578         return 0;
2579 }
2580
2581 static struct console sercons = {
2582         .name = "ttyS",
2583         .write = serial167_console_write,
2584         .device = serial167_console_device,
2585         .setup = serial167_console_setup,
2586         .flags = CON_PRINTBUFFER,
2587         .index = -1,
2588 };
2589
2590 static int __init serial167_console_init(void)
2591 {
2592         if (vme_brdtype == VME_TYPE_MVME166 ||
2593             vme_brdtype == VME_TYPE_MVME167 ||
2594             vme_brdtype == VME_TYPE_MVME177) {
2595                 mvme167_serial_console_setup(0);
2596                 register_console(&sercons);
2597         }
2598         return 0;
2599 }
2600
2601 console_initcall(serial167_console_init);
2602
2603 #ifdef CONFIG_REMOTE_DEBUG
2604 void putDebugChar(int c)
2605 {
2606         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
2607         unsigned long flags;
2608         volatile u_char sink;
2609         u_char ier;
2610         int port;
2611
2612         local_irq_save(flags);
2613
2614         /* Ensure transmitter is enabled! */
2615
2616         port = DEBUG_PORT;
2617         base_addr[CyCAR] = (u_char) port;
2618         while (base_addr[CyCCR])
2619                 ;
2620         base_addr[CyCCR] = CyENB_XMTR;
2621
2622         ier = base_addr[CyIER];
2623         base_addr[CyIER] = CyTxMpty;
2624
2625         while (1) {
2626                 if (pcc2chip[PccSCCTICR] & 0x20) {
2627                         /* We have a Tx int. Acknowledge it */
2628                         sink = pcc2chip[PccTPIACKR];
2629                         if ((base_addr[CyLICR] >> 2) == port) {
2630                                 base_addr[CyTDR] = c;
2631                                 base_addr[CyTEOIR] = 0;
2632                                 break;
2633                         } else
2634                                 base_addr[CyTEOIR] = CyNOTRANS;
2635                 }
2636         }
2637
2638         base_addr[CyIER] = ier;
2639
2640         local_irq_restore(flags);
2641 }
2642
2643 int getDebugChar()
2644 {
2645         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
2646         unsigned long flags;
2647         volatile u_char sink;
2648         u_char ier;
2649         int port;
2650         int i, c;
2651
2652         i = debugiq.out;
2653         if (i != debugiq.in) {
2654                 c = debugiq.buf[i];
2655                 if (++i == DEBUG_LEN)
2656                         i = 0;
2657                 debugiq.out = i;
2658                 return c;
2659         }
2660         /* OK, nothing in queue, wait in poll loop */
2661
2662         local_irq_save(flags);
2663
2664         /* Ensure receiver is enabled! */
2665
2666         port = DEBUG_PORT;
2667         base_addr[CyCAR] = (u_char) port;
2668 #if 0
2669         while (base_addr[CyCCR])
2670                 ;
2671         base_addr[CyCCR] = CyENB_RCVR;
2672 #endif
2673         ier = base_addr[CyIER];
2674         base_addr[CyIER] = CyRxData;
2675
2676         while (1) {
2677                 if (pcc2chip[PccSCCRICR] & 0x20) {
2678                         /* We have a Rx int. Acknowledge it */
2679                         sink = pcc2chip[PccRPIACKR];
2680                         if ((base_addr[CyLICR] >> 2) == port) {
2681                                 int cnt = base_addr[CyRFOC];
2682                                 while (cnt-- > 0) {
2683                                         c = base_addr[CyRDR];
2684                                         if (c == 0)
2685                                                 printk
2686                                                     ("!! debug char is null (cnt=%d) !!",
2687                                                      cnt);
2688                                         else
2689                                                 queueDebugChar(c);
2690                                 }
2691                                 base_addr[CyREOIR] = 0;
2692                                 i = debugiq.out;
2693                                 if (i == debugiq.in)
2694                                         panic("Debug input queue empty!");
2695                                 c = debugiq.buf[i];
2696                                 if (++i == DEBUG_LEN)
2697                                         i = 0;
2698                                 debugiq.out = i;
2699                                 break;
2700                         } else
2701                                 base_addr[CyREOIR] = CyNOTRANS;
2702                 }
2703         }
2704
2705         base_addr[CyIER] = ier;
2706
2707         local_irq_restore(flags);
2708
2709         return (c);
2710 }
2711
2712 void queueDebugChar(int c)
2713 {
2714         int i;
2715
2716         i = debugiq.in;
2717         debugiq.buf[i] = c;
2718         if (++i == DEBUG_LEN)
2719                 i = 0;
2720         if (i != debugiq.out)
2721                 debugiq.in = i;
2722 }
2723
2724 static void debug_setup()
2725 {
2726         unsigned long flags;
2727         volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
2728         int i, cflag;
2729
2730         cflag = B19200;
2731
2732         local_irq_save(flags);
2733
2734         for (i = 0; i < 4; i++) {
2735                 base_addr[CyCAR] = i;
2736                 base_addr[CyLICR] = i << 2;
2737         }
2738
2739         debugiq.in = debugiq.out = 0;
2740
2741         base_addr[CyCAR] = DEBUG_PORT;
2742
2743         /* baud rate */
2744         i = cflag & CBAUD;
2745
2746         base_addr[CyIER] = 0;
2747
2748         base_addr[CyCMR] = CyASYNC;
2749         base_addr[CyLICR] = DEBUG_PORT << 2;
2750         base_addr[CyLIVR] = 0x5c;
2751
2752         /* tx and rx baud rate */
2753
2754         base_addr[CyTCOR] = baud_co[i];
2755         base_addr[CyTBPR] = baud_bpr[i];
2756         base_addr[CyRCOR] = baud_co[i] >> 5;
2757         base_addr[CyRBPR] = baud_bpr[i];
2758
2759         /* set line characteristics  according configuration */
2760
2761         base_addr[CySCHR1] = 0;
2762         base_addr[CySCHR2] = 0;
2763         base_addr[CySCRL] = 0;
2764         base_addr[CySCRH] = 0;
2765         base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
2766         base_addr[CyCOR2] = 0;
2767         base_addr[CyCOR3] = Cy_1_STOP;
2768         base_addr[CyCOR4] = baud_cor4[i];
2769         base_addr[CyCOR5] = 0;
2770         base_addr[CyCOR6] = 0;
2771         base_addr[CyCOR7] = 0;
2772
2773         write_cy_cmd(base_addr, CyINIT_CHAN);
2774         write_cy_cmd(base_addr, CyENB_RCVR);
2775
2776         base_addr[CyCAR] = DEBUG_PORT;  /* !!! Is this needed? */
2777
2778         base_addr[CyRTPRL] = 2;
2779         base_addr[CyRTPRH] = 0;
2780
2781         base_addr[CyMSVR1] = CyRTS;
2782         base_addr[CyMSVR2] = CyDTR;
2783
2784         base_addr[CyIER] = CyRxData;
2785
2786         local_irq_restore(flags);
2787
2788 }                               /* debug_setup */
2789
2790 #endif
2791
2792 MODULE_LICENSE("GPL");