git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this driver
  15  *
  16  * See http://geocities.com/i0xox0i for information on this driver and the
  17  * earthmate usb device.
  18  *
  19  *  Lonnie Mendez <dignome@gmail.com>
  20  *  4-29-2005
  21  *      Fixed problem where setting or retreiving the serial config would fail with
  22  *      EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
  23  *      adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
  24  *      result, transfer speed has been substantially increased.  From avg. 850bps to
  25  *      avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
  26  *      formatting issues so it is more readable.  Replaced the C++ style comments.
  27  *
  28  *  Lonnie Mendez <dignome@gmail.com>
  29  *  12-15-2004
  30  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  31  *      handling so both lines are raised in cypress_open. (was dropping rts)
  32  *      Various code cleanups made as well along with other misc bug fixes.
  33  *
  34  *  Lonnie Mendez <dignome@gmail.com>
  35  *  04-10-2004
  36  *      Driver modified to support dynamic line settings.  Various improvments
  37  *      and features.
  38  *
  39  *  Neil Whelchel
  40  *  10-2003
  41  *      Driver first released.
  42  *
  43  */
  44
  45 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
  46 /* Thanks to cypress for providing references for the hid reports. */
  47 /* Thanks to Jiang Zhang for providing links and for general help. */
  48 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
  49
  50
  51 #include <linux/config.h>
  52 #include <linux/kernel.h>
  53 #include <linux/errno.h>
  54 #include <linux/init.h>
  55 #include <linux/slab.h>
  56 #include <linux/tty.h>
  57 #include <linux/tty_driver.h>
  58 #include <linux/tty_flip.h>
  59 #include <linux/module.h>
  60 #include <linux/moduleparam.h>
  61 #include <linux/spinlock.h>
  62 #include <linux/usb.h>
  63 #include <linux/serial.h>
  64 #include <linux/delay.h>
  65 #include <asm/uaccess.h>
  66
  67 #include "usb-serial.h"
  68 #include "cypress_m8.h"
  69
  70
  71 #ifdef CONFIG_USB_SERIAL_DEBUG
  72         static int debug = 1;
  73 #else
  74         static int debug;
  75 #endif
  76 static int stats;
  77 static int interval;
  78
  79 /*
  80  * Version Information
  81  */
  82 #define DRIVER_VERSION "v1.09"
  83 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  84 #define DRIVER_DESC "Cypress USB to Serial Driver"
  85
  86 /* write buffer size defines */
  87 #define CYPRESS_BUF_SIZE        1024
  88 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  89
  90 static struct usb_device_id id_table_earthmate [] = {
  91         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  92         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  93         { }                                             /* Terminating entry */
  94 };
  95
  96 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  97         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
  98         { }                                             /* Terminating entry */
  99 };
 100
 101 static struct usb_device_id id_table_combined [] = {
 102         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 103         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 104         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 105         { }                                             /* Terminating entry */
 106 };
 107
 108 MODULE_DEVICE_TABLE (usb, id_table_combined);
 109
 110 static struct usb_driver cypress_driver = {
 111         .name =         "cypress",
 112         .probe =        usb_serial_probe,
 113         .disconnect =   usb_serial_disconnect,
 114         .id_table =     id_table_combined,
 115 };
 116
 117 struct cypress_private {
 118         spinlock_t lock;                   /* private lock */
 119         int chiptype;                      /* identifier of device, for quirks/etc */
 120         int bytes_in;                      /* used for statistics */
 121         int bytes_out;                     /* used for statistics */
 122         int cmd_count;                     /* used for statistics */
 123         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 124         struct cypress_buf *buf;           /* write buffer */
 125         int write_urb_in_use;              /* write urb in use indicator */
 126         int termios_initialized;
 127         __u8 line_control;                 /* holds dtr / rts value */
 128         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 129         __u8 current_config;               /* stores the current configuration byte */
 130         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 131         int baud_rate;                     /* stores current baud rate in integer form */
 132         int cbr_mask;                      /* stores current baud rate in masked form */
 133         int isthrottled;                   /* if throttled, discard reads */
 134         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 135         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 136         /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
 137         struct termios tmp_termios;        /* stores the old termios settings */
 138 };
 139
 140 /* write buffer structure */
 141 struct cypress_buf {
 142         unsigned int    buf_size;
 143         char            *buf_buf;
 144         char            *buf_get;
 145         char            *buf_put;
 146 };
 147
 148 /* function prototypes for the Cypress USB to serial device */
 149 static int  cypress_earthmate_startup   (struct usb_serial *serial);
 150 static int  cypress_hidcom_startup      (struct usb_serial *serial);
 151 static void cypress_shutdown            (struct usb_serial *serial);
 152 static int  cypress_open                (struct usb_serial_port *port, struct file *filp);
 153 static void cypress_close               (struct usb_serial_port *port, struct file *filp);
 154 static int  cypress_write               (struct usb_serial_port *port, const unsigned char *buf, int count);
 155 static void cypress_send                (struct usb_serial_port *port);
 156 static int  cypress_write_room          (struct usb_serial_port *port);
 157 static int  cypress_ioctl               (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 158 static void cypress_set_termios         (struct usb_serial_port *port, struct termios * old);
 159 static int  cypress_tiocmget            (struct usb_serial_port *port, struct file *file);
 160 static int  cypress_tiocmset            (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 161 static int  cypress_chars_in_buffer     (struct usb_serial_port *port);
 162 static void cypress_throttle            (struct usb_serial_port *port);
 163 static void cypress_unthrottle          (struct usb_serial_port *port);
 164 static void cypress_read_int_callback   (struct urb *urb, struct pt_regs *regs);
 165 static void cypress_write_int_callback  (struct urb *urb, struct pt_regs *regs);
 166 /* baud helper functions */
 167 static int       mask_to_rate           (unsigned mask);
 168 static unsigned  rate_to_mask           (int rate);
 169 /* write buffer functions */
 170 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 171 static void               cypress_buf_free(struct cypress_buf *cb);
 172 static void               cypress_buf_clear(struct cypress_buf *cb);
 173 static unsigned int       cypress_buf_data_avail(struct cypress_buf *cb);
 174 static unsigned int       cypress_buf_space_avail(struct cypress_buf *cb);
 175 static unsigned int       cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
 176 static unsigned int       cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
 177
 178
 179 static struct usb_serial_device_type cypress_earthmate_device = {
 180         .owner =                        THIS_MODULE,
 181         .name =                         "DeLorme Earthmate USB",
 182         .short_name =                   "earthmate",
 183         .id_table =                     id_table_earthmate,
 184         .num_interrupt_in =             1,
 185         .num_interrupt_out =            1,
 186         .num_bulk_in =                  NUM_DONT_CARE,
 187         .num_bulk_out =                 NUM_DONT_CARE,
 188         .num_ports =                    1,
 189         .attach =                       cypress_earthmate_startup,
 190         .shutdown =                     cypress_shutdown,
 191         .open =                         cypress_open,
 192         .close =                        cypress_close,
 193         .write =                        cypress_write,
 194         .write_room =                   cypress_write_room,
 195         .ioctl =                        cypress_ioctl,
 196         .set_termios =                  cypress_set_termios,
 197         .tiocmget =                     cypress_tiocmget,
 198         .tiocmset =                     cypress_tiocmset,
 199         .chars_in_buffer =              cypress_chars_in_buffer,
 200         .throttle =                     cypress_throttle,
 201         .unthrottle =                   cypress_unthrottle,
 202         .read_int_callback =            cypress_read_int_callback,
 203         .write_int_callback =           cypress_write_int_callback,
 204 };
 205
 206 static struct usb_serial_device_type cypress_hidcom_device = {
 207         .owner =                        THIS_MODULE,
 208         .name =                         "HID->COM RS232 Adapter",
 209         .short_name =                   "cyphidcom",
 210         .id_table =                     id_table_cyphidcomrs232,
 211         .num_interrupt_in =             1,
 212         .num_interrupt_out =            1,
 213         .num_bulk_in =                  NUM_DONT_CARE,
 214         .num_bulk_out =                 NUM_DONT_CARE,
 215         .num_ports =                    1,
 216         .attach =                       cypress_hidcom_startup,
 217         .shutdown =                     cypress_shutdown,
 218         .open =                         cypress_open,
 219         .close =                        cypress_close,
 220         .write =                        cypress_write,
 221         .write_room =                   cypress_write_room,
 222         .ioctl =                        cypress_ioctl,
 223         .set_termios =                  cypress_set_termios,
 224         .tiocmget =                     cypress_tiocmget,
 225         .tiocmset =                     cypress_tiocmset,
 226         .chars_in_buffer =              cypress_chars_in_buffer,
 227         .throttle =                     cypress_throttle,
 228         .unthrottle =                   cypress_unthrottle,
 229         .read_int_callback =            cypress_read_int_callback,
 230         .write_int_callback =           cypress_write_int_callback,
 231 };
 232
 233
 234 /*****************************************************************************
 235  * Cypress serial helper functions
 236  *****************************************************************************/
 237
 238
 239 /* This function can either set or retrieve the current serial line settings */
 240 static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
 241                                    int parity_enable, int parity_type, int reset, int cypress_request_type)
 242 {
 243         int new_baudrate = 0, retval = 0, tries = 0;
 244         struct cypress_private *priv;
 245         __u8 feature_buffer[8];
 246         unsigned long flags;
 247
 248         dbg("%s", __FUNCTION__);
 249
 250         priv = usb_get_serial_port_data(port);
 251
 252         switch(cypress_request_type) {
 253                 case CYPRESS_SET_CONFIG:
 254
 255                         /*
 256                          * The general purpose firmware for the Cypress M8 allows for a maximum speed
 257                          * of 57600bps (I have no idea whether DeLorme chose to use the general purpose
 258                          * firmware or not), if you need to modify this speed setting for your own
 259                          * project please add your own chiptype and modify the code likewise.  The
 260                          * Cypress HID->COM device will work successfully up to 115200bps (but the
 261                          * actual throughput is around 3kBps).
 262                          */
 263                         if (baud_mask != priv->cbr_mask) {
 264                                 dbg("%s - baud rate is changing", __FUNCTION__);
 265                                 if ( priv->chiptype == CT_EARTHMATE ) {
 266                                         /* 300 and 600 baud rates are supported under the generic firmware,
 267                                          * but are not used with NMEA and SiRF protocols */
 268
 269                                         if ( (baud_mask == B300) || (baud_mask == B600) ) {
 270                                                 err("%s - failed setting baud rate, unsupported speed",
 271                                                     __FUNCTION__);
 272                                                 new_baudrate = priv->baud_rate;
 273                                         } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 274                                                 err("%s - failed setting baud rate, unsupported speed",
 275                                                     __FUNCTION__);
 276                                                 new_baudrate = priv->baud_rate;
 277                                         }
 278                                 } else if (priv->chiptype == CT_CYPHIDCOM) {
 279                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 280                                                 err("%s - failed setting baud rate, unsupported speed",
 281                                                     __FUNCTION__);
 282                                                 new_baudrate = priv->baud_rate;
 283                                         }
 284                                 } else if (priv->chiptype == CT_GENERIC) {
 285                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 286                                                 err("%s - failed setting baud rate, unsupported speed",
 287                                                     __FUNCTION__);
 288                                                 new_baudrate = priv->baud_rate;
 289                                         }
 290                                 } else {
 291                                         info("%s - please define your chiptype", __FUNCTION__);
 292                                         new_baudrate = priv->baud_rate;
 293                                 }
 294                         } else {  /* baud rate not changing, keep the old */
 295                                 new_baudrate = priv->baud_rate;
 296                         }
 297                         dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
 298
 299                         memset(feature_buffer, 0, 8);
 300                         /* fill the feature_buffer with new configuration */
 301                         *((u_int32_t *)feature_buffer) = new_baudrate;
 302
 303                         feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 304                         /* 1 bit gap */
 305                         feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 306                         feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 307                         feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 308                         /* 1 bit gap */
 309                         feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 310
 311                         dbg("%s - device is being sent this feature report:", __FUNCTION__);
 312                         dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
 313                             feature_buffer[2], feature_buffer[3], feature_buffer[4]);
 314
 315                         do {
 316                         retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
 317                                                   HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 318                                                           0x0300, 0, feature_buffer, 8, 500);
 319
 320                                 if (tries++ >= 3)
 321                                         break;
 322
 323                                 if (retval == EPIPE)
 324                                         usb_clear_halt(port->serial->dev, 0x00);
 325                         } while (retval != 8 && retval != ENODEV);
 326
 327                         if (retval != 8)
 328                                 err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
 329                         else {
 330                                 spin_lock_irqsave(&priv->lock, flags);
 331                                 priv->baud_rate = new_baudrate;
 332                                 priv->cbr_mask = baud_mask;
 333                                 priv->current_config = feature_buffer[4];
 334                                 spin_unlock_irqrestore(&priv->lock, flags);
 335                         }
 336                 break;
 337                 case CYPRESS_GET_CONFIG:
 338                         dbg("%s - retreiving serial line settings", __FUNCTION__);
 339                         /* set initial values in feature buffer */
 340                         memset(feature_buffer, 0, 8);
 341
 342                         do {
 343                         retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
 344                                                   HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 345                                                           0x0300, 0, feature_buffer, 8, 500);
 346
 347                                 if (tries++ >= 3)
 348                                         break;
 349
 350                                 if (retval == EPIPE)
 351                                         usb_clear_halt(port->serial->dev, 0x00);
 352                         } while (retval != 5 && retval != ENODEV);
 353
 354                         if (retval != 5) {
 355                                 err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
 356                                 return retval;
 357                         } else {
 358                                 spin_lock_irqsave(&priv->lock, flags);
 359
 360                                 /* store the config in one byte, and later use bit masks to check values */
 361                                 priv->current_config = feature_buffer[4];
 362                                 priv->baud_rate = *((u_int32_t *)feature_buffer);
 363
 364                                 if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
 365                                         dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
 366                                 spin_unlock_irqrestore(&priv->lock, flags);
 367                         }
 368         }
 369         spin_lock_irqsave(&priv->lock, flags);
 370         ++priv->cmd_count;
 371         spin_unlock_irqrestore(&priv->lock, flags);
 372
 373         return retval;
 374 } /* cypress_serial_control */
 375
 376
 377 /* given a baud mask, it will return integer baud on success */
 378 static int mask_to_rate (unsigned mask)
 379 {
 380         int rate;
 381
 382         switch (mask) {
 383                 case B0: rate = 0; break;
 384                 case B300: rate = 300; break;
 385                 case B600: rate = 600; break;
 386                 case B1200: rate = 1200; break;
 387                 case B2400: rate = 2400; break;
 388                 case B4800: rate = 4800; break;
 389                 case B9600: rate = 9600; break;
 390                 case B19200: rate = 19200; break;
 391                 case B38400: rate = 38400; break;
 392                 case B57600: rate = 57600; break;
 393                 case B115200: rate = 115200; break;
 394                 default: rate = -1;
 395         }
 396
 397         return rate;
 398 }
 399
 400
 401 static unsigned rate_to_mask (int rate)
 402 {
 403         unsigned mask;
 404
 405         switch (rate) {
 406                 case 0: mask = B0; break;
 407                 case 300: mask = B300; break;
 408                 case 600: mask = B600; break;
 409                 case 1200: mask = B1200; break;
 410                 case 2400: mask = B2400; break;
 411                 case 4800: mask = B4800; break;
 412                 case 9600: mask = B9600; break;
 413                 case 19200: mask = B19200; break;
 414                 case 38400: mask = B38400; break;
 415                 case 57600: mask = B57600; break;
 416                 case 115200: mask = B115200; break;
 417                 default: mask = 0x40;
 418         }
 419
 420         return mask;
 421 }
 422 /*****************************************************************************
 423  * Cypress serial driver functions
 424  *****************************************************************************/
 425
 426
 427 static int generic_startup (struct usb_serial *serial)
 428 {
 429         struct cypress_private *priv;
 430
 431         dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
 432
 433         priv = kmalloc(sizeof (struct cypress_private), GFP_KERNEL);
 434         if (!priv)
 435                 return -ENOMEM;
 436
 437         memset(priv, 0x00, sizeof (struct cypress_private));
 438         spin_lock_init(&priv->lock);
 439         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 440         if (priv->buf == NULL) {
 441                 kfree(priv);
 442                 return -ENOMEM;
 443         }
 444         init_waitqueue_head(&priv->delta_msr_wait);
 445
 446         usb_reset_configuration (serial->dev);
 447
 448         interval = 1;
 449         priv->cmd_ctrl = 0;
 450         priv->line_control = 0;
 451         priv->termios_initialized = 0;
 452         priv->rx_flags = 0;
 453         priv->cbr_mask = B300;
 454         usb_set_serial_port_data(serial->port[0], priv);
 455
 456         return (0);
 457 }
 458
 459
 460 static int cypress_earthmate_startup (struct usb_serial *serial)
 461 {
 462         struct cypress_private *priv;
 463
 464         dbg("%s", __FUNCTION__);
 465
 466         if (generic_startup(serial)) {
 467                 dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
 468                 return 1;
 469         }
 470
 471         priv = usb_get_serial_port_data(serial->port[0]);
 472         priv->chiptype = CT_EARTHMATE;
 473
 474         return (0);
 475 } /* cypress_earthmate_startup */
 476
 477
 478 static int cypress_hidcom_startup (struct usb_serial *serial)
 479 {
 480         struct cypress_private *priv;
 481
 482         dbg("%s", __FUNCTION__);
 483
 484         if (generic_startup(serial)) {
 485                 dbg("%s - Failed setting up port %d", __FUNCTION__, serial->port[0]->number);
 486                 return 1;
 487         }
 488
 489         priv = usb_get_serial_port_data(serial->port[0]);
 490         priv->chiptype = CT_CYPHIDCOM;
 491
 492         return (0);
 493 } /* cypress_hidcom_startup */
 494
 495
 496 static void cypress_shutdown (struct usb_serial *serial)
 497 {
 498         struct cypress_private *priv;
 499
 500         dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);
 501
 502         /* all open ports are closed at this point */
 503
 504         priv = usb_get_serial_port_data(serial->port[0]);
 505
 506         if (priv) {
 507                 cypress_buf_free(priv->buf);
 508                 kfree(priv);
 509                 usb_set_serial_port_data(serial->port[0], NULL);
 510         }
 511 }
 512
 513
 514 static int cypress_open (struct usb_serial_port *port, struct file *filp)
 515 {
 516         struct cypress_private *priv = usb_get_serial_port_data(port);
 517         struct usb_serial *serial = port->serial;
 518         unsigned long flags;
 519         int result = 0;
 520
 521         dbg("%s - port %d", __FUNCTION__, port->number);
 522
 523         /* clear halts before open */
 524         usb_clear_halt(serial->dev, 0x81);
 525         usb_clear_halt(serial->dev, 0x02);
 526
 527         spin_lock_irqsave(&priv->lock, flags);
 528         /* reset read/write statistics */
 529         priv->bytes_in = 0;
 530         priv->bytes_out = 0;
 531         priv->cmd_count = 0;
 532         priv->rx_flags = 0;
 533         spin_unlock_irqrestore(&priv->lock, flags);
 534
 535         /* setting to zero could cause data loss */
 536         port->tty->low_latency = 1;
 537
 538         /* raise both lines and set termios */
 539         spin_lock_irqsave(&priv->lock, flags);
 540         priv->line_control = CONTROL_DTR | CONTROL_RTS;
 541         priv->cmd_ctrl = 1;
 542         spin_unlock_irqrestore(&priv->lock, flags);
 543         result = cypress_write(port, NULL, 0);
 544
 545         if (result) {
 546                 dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
 547                 return result;
 548         } else
 549                 dbg("%s - success setting the control lines", __FUNCTION__);
 550
 551         cypress_set_termios(port, &priv->tmp_termios);
 552
 553         /* setup the port and start reading from the device */
 554         if(!port->interrupt_in_urb){
 555                 err("%s - interrupt_in_urb is empty!", __FUNCTION__);
 556                 return(-1);
 557         }
 558
 559         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 560                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 561                 port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
 562                 cypress_read_int_callback, port, interval);
 563         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 564
 565         if (result){
 566                 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
 567         }
 568
 569         return result;
 570 } /* cypress_open */
 571
 572
 573 static void cypress_close(struct usb_serial_port *port, struct file * filp)
 574 {
 575         struct cypress_private *priv = usb_get_serial_port_data(port);
 576         unsigned int c_cflag;
 577         unsigned long flags;
 578         int bps;
 579         long timeout;
 580         wait_queue_t wait;
 581
 582         dbg("%s - port %d", __FUNCTION__, port->number);
 583
 584         /* wait for data to drain from buffer */
 585         spin_lock_irqsave(&priv->lock, flags);
 586         timeout = CYPRESS_CLOSING_WAIT;
 587         init_waitqueue_entry(&wait, current);
 588         add_wait_queue(&port->tty->write_wait, &wait);
 589         for (;;) {
 590                 set_current_state(TASK_INTERRUPTIBLE);
 591                 if (cypress_buf_data_avail(priv->buf) == 0
 592                 || timeout == 0 || signal_pending(current)
 593                 || !usb_get_intfdata(port->serial->interface))
 594                         break;
 595                 spin_unlock_irqrestore(&priv->lock, flags);
 596                 timeout = schedule_timeout(timeout);
 597                 spin_lock_irqsave(&priv->lock, flags);
 598         }
 599         set_current_state(TASK_RUNNING);
 600         remove_wait_queue(&port->tty->write_wait, &wait);
 601         /* clear out any remaining data in the buffer */
 602         cypress_buf_clear(priv->buf);
 603         spin_unlock_irqrestore(&priv->lock, flags);
 604
 605         /* wait for characters to drain from device */
 606         bps = tty_get_baud_rate(port->tty);
 607         if (bps > 1200)
 608                 timeout = max((HZ*2560)/bps,HZ/10);
 609         else
 610                 timeout = 2*HZ;
 611         set_current_state(TASK_INTERRUPTIBLE);
 612         schedule_timeout(timeout);
 613
 614         dbg("%s - stopping urbs", __FUNCTION__);
 615         usb_kill_urb (port->interrupt_in_urb);
 616         usb_kill_urb (port->interrupt_out_urb);
 617
 618         if (port->tty) {
 619                 c_cflag = port->tty->termios->c_cflag;
 620                 if (c_cflag & HUPCL) {
 621                         /* drop dtr and rts */
 622                         priv = usb_get_serial_port_data(port);
 623                         spin_lock_irqsave(&priv->lock, flags);
 624                         priv->line_control = 0;
 625                         priv->cmd_ctrl = 1;
 626                         spin_unlock_irqrestore(&priv->lock, flags);
 627                         cypress_write(port, NULL, 0);
 628                 }
 629         }
 630
 631         if (stats)
 632                 dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 633                           priv->bytes_in, priv->bytes_out, priv->cmd_count);
 634 } /* cypress_close */
 635
 636
 637 static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 638 {
 639         struct cypress_private *priv = usb_get_serial_port_data(port);
 640         unsigned long flags;
 641
 642         dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
 643
 644         /* line control commands, which need to be executed immediately,
 645            are not put into the buffer for obvious reasons.
 646          */
 647         if (priv->cmd_ctrl) {
 648                 count = 0;
 649                 goto finish;
 650         }
 651
 652         if (!count)
 653                 return count;
 654
 655         spin_lock_irqsave(&priv->lock, flags);
 656         count = cypress_buf_put(priv->buf, buf, count);
 657         spin_unlock_irqrestore(&priv->lock, flags);
 658
 659 finish:
 660         cypress_send(port);
 661
 662         return count;
 663 } /* cypress_write */
 664
 665
 666 static void cypress_send(struct usb_serial_port *port)
 667 {
 668         int count = 0, result, offset, actual_size;
 669         struct cypress_private *priv = usb_get_serial_port_data(port);
 670         unsigned long flags;
 671
 672         dbg("%s - port %d", __FUNCTION__, port->number);
 673         dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
 674
 675         spin_lock_irqsave(&priv->lock, flags);
 676         if (priv->write_urb_in_use) {
 677                 dbg("%s - can't write, urb in use", __FUNCTION__);
 678                 spin_unlock_irqrestore(&priv->lock, flags);
 679                 return;
 680         }
 681         spin_unlock_irqrestore(&priv->lock, flags);
 682
 683         /* clear buffer */
 684         memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
 685
 686         spin_lock_irqsave(&priv->lock, flags);
 687         switch (port->interrupt_out_size) {
 688                 case 32:
 689                         /* this is for the CY7C64013... */
 690                         offset = 2;
 691                         port->interrupt_out_buffer[0] = priv->line_control;
 692                         break;
 693                 case 8:
 694                         /* this is for the CY7C63743... */
 695                         offset = 1;
 696                         port->interrupt_out_buffer[0] = priv->line_control;
 697                         break;
 698                 default:
 699                         dbg("%s - wrong packet size", __FUNCTION__);
 700                         spin_unlock_irqrestore(&priv->lock, flags);
 701                         return;
 702         }
 703
 704         if (priv->line_control & CONTROL_RESET)
 705                 priv->line_control &= ~CONTROL_RESET;
 706
 707         if (priv->cmd_ctrl) {
 708                 priv->cmd_count++;
 709                 dbg("%s - line control command being issued", __FUNCTION__);
 710                 spin_unlock_irqrestore(&priv->lock, flags);
 711                 goto send;
 712         } else
 713                 spin_unlock_irqrestore(&priv->lock, flags);
 714
 715         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 716                                 port->interrupt_out_size-offset);
 717
 718         if (count == 0) {
 719                 return;
 720         }
 721
 722         switch (port->interrupt_out_size) {
 723                 case 32:
 724                         port->interrupt_out_buffer[1] = count;
 725                         break;
 726                 case 8:
 727                         port->interrupt_out_buffer[0] |= count;
 728         }
 729
 730         dbg("%s - count is %d", __FUNCTION__, count);
 731
 732 send:
 733         spin_lock_irqsave(&priv->lock, flags);
 734         priv->write_urb_in_use = 1;
 735         spin_unlock_irqrestore(&priv->lock, flags);
 736
 737         if (priv->cmd_ctrl)
 738                 actual_size = 1;
 739         else
 740                 actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1);
 741
 742         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
 743                               port->interrupt_out_urb->transfer_buffer);
 744
 745         port->interrupt_out_urb->transfer_buffer_length = actual_size;
 746         port->interrupt_out_urb->dev = port->serial->dev;
 747         port->interrupt_out_urb->interval = interval;
 748         result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
 749         if (result) {
 750                 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
 751                         result);
 752                 priv->write_urb_in_use = 0;
 753         }
 754
 755         spin_lock_irqsave(&priv->lock, flags);
 756         if (priv->cmd_ctrl) {
 757                 priv->cmd_ctrl = 0;
 758         }
 759         priv->bytes_out += count; /* do not count the line control and size bytes */
 760         spin_unlock_irqrestore(&priv->lock, flags);
 761
 762         schedule_work(&port->work);
 763 } /* cypress_send */
 764
 765
 766 /* returns how much space is available in the soft buffer */
 767 static int cypress_write_room(struct usb_serial_port *port)
 768 {
 769         struct cypress_private *priv = usb_get_serial_port_data(port);
 770         int room = 0;
 771         unsigned long flags;
 772
 773         dbg("%s - port %d", __FUNCTION__, port->number);
 774
 775         spin_lock_irqsave(&priv->lock, flags);
 776         room = cypress_buf_space_avail(priv->buf);
 777         spin_unlock_irqrestore(&priv->lock, flags);
 778
 779         dbg("%s - returns %d", __FUNCTION__, room);
 780         return room;
 781 }
 782
 783
 784 static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
 785 {
 786         struct cypress_private *priv = usb_get_serial_port_data(port);
 787         __u8 status, control;
 788         unsigned int result = 0;
 789         unsigned long flags;
 790
 791         dbg("%s - port %d", __FUNCTION__, port->number);
 792
 793         spin_lock_irqsave(&priv->lock, flags);
 794         control = priv->line_control;
 795         status = priv->current_status;
 796         spin_unlock_irqrestore(&priv->lock, flags);
 797
 798         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 799                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 800                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 801                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 802                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 803                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 804
 805         dbg("%s - result = %x", __FUNCTION__, result);
 806
 807         return result;
 808 }
 809
 810
 811 static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
 812                                unsigned int set, unsigned int clear)
 813 {
 814         struct cypress_private *priv = usb_get_serial_port_data(port);
 815         unsigned long flags;
 816
 817         dbg("%s - port %d", __FUNCTION__, port->number);
 818
 819         spin_lock_irqsave(&priv->lock, flags);
 820         if (set & TIOCM_RTS)
 821                 priv->line_control |= CONTROL_RTS;
 822         if (set & TIOCM_DTR)
 823                 priv->line_control |= CONTROL_DTR;
 824         if (clear & TIOCM_RTS)
 825                 priv->line_control &= ~CONTROL_RTS;
 826         if (clear & TIOCM_DTR)
 827                 priv->line_control &= ~CONTROL_DTR;
 828         spin_unlock_irqrestore(&priv->lock, flags);
 829
 830         priv->cmd_ctrl = 1;
 831         return cypress_write(port, NULL, 0);
 832 }
 833
 834
 835 static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
 836 {
 837         struct cypress_private *priv = usb_get_serial_port_data(port);
 838
 839         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
 840
 841         switch (cmd) {
 842                 case TIOCGSERIAL:
 843                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
 844                                 return -EFAULT;
 845                         }
 846                         return (0);
 847                         break;
 848                 case TIOCSSERIAL:
 849                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
 850                                 return -EFAULT;
 851                         }
 852                         /* here we need to call cypress_set_termios to invoke the new settings */
 853                         cypress_set_termios(port, &priv->tmp_termios);
 854                         return (0);
 855                         break;
 856                 /* these are called when setting baud rate from gpsd */
 857                 case TCGETS:
 858                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
 859                                 return -EFAULT;
 860                         }
 861                         return (0);
 862                         break;
 863                 case TCSETS:
 864                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
 865                                 return -EFAULT;
 866                         }
 867                         /* here we need to call cypress_set_termios to invoke the new settings */
 868                         cypress_set_termios(port, &priv->tmp_termios);
 869                         return (0);
 870                         break;
 871                 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 872                 case TIOCMIWAIT:
 873                         while (priv != NULL) {
 874                                 interruptible_sleep_on(&priv->delta_msr_wait);
 875                                 /* see if a signal did it */
 876                                 if (signal_pending(current))
 877                                         return -ERESTARTSYS;
 878                                 else {
 879                                         char diff = priv->diff_status;
 880
 881                                         if (diff == 0) {
 882                                                 return -EIO; /* no change => error */
 883                                         }
 884
 885                                         /* consume all events */
 886                                         priv->diff_status = 0;
 887
 888                                         /* return 0 if caller wanted to know about these bits */
 889                                         if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
 890                                              ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
 891                                              ((arg & TIOCM_CD) && (diff & UART_CD)) ||
 892                                              ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
 893                                                 return 0;
 894                                         }
 895                                         /* otherwise caller can't care less about what happened,
 896                                          * and so we continue to wait for more events.
 897                                          */
 898                                 }
 899                         }
 900                         return 0;
 901                         break;
 902                 default:
 903                         break;
 904         }
 905
 906         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);
 907
 908         return -ENOIOCTLCMD;
 909 } /* cypress_ioctl */
 910
 911
 912 static void cypress_set_termios (struct usb_serial_port *port, struct termios *old_termios)
 913 {
 914         struct cypress_private *priv = usb_get_serial_port_data(port);
 915         struct tty_struct *tty;
 916         int data_bits, stop_bits, parity_type, parity_enable;
 917         unsigned cflag, iflag, baud_mask;
 918         unsigned long flags;
 919         __u8 oldlines;
 920         int linechange = 0;
 921
 922         dbg("%s - port %d", __FUNCTION__, port->number);
 923
 924         tty = port->tty;
 925         if ((!tty) || (!tty->termios)) {
 926                 dbg("%s - no tty structures", __FUNCTION__);
 927                 return;
 928         }
 929
 930         spin_lock_irqsave(&priv->lock, flags);
 931         if (!priv->termios_initialized) {
 932                 if (priv->chiptype == CT_EARTHMATE) {
 933                         *(tty->termios) = tty_std_termios;
 934                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL;
 935                 } else if (priv->chiptype == CT_CYPHIDCOM) {
 936                         *(tty->termios) = tty_std_termios;
 937                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 938                 }
 939                 priv->termios_initialized = 1;
 940         }
 941         spin_unlock_irqrestore(&priv->lock, flags);
 942
 943         cflag = tty->termios->c_cflag;
 944         iflag = tty->termios->c_iflag;
 945
 946         /* check if there are new settings */
 947         if (old_termios) {
 948                 if ((cflag != old_termios->c_cflag) ||
 949                     (RELEVANT_IFLAG(iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
 950                         dbg("%s - attempting to set new termios settings", __FUNCTION__);
 951                         /* should make a copy of this in case something goes wrong in the function, we can restore it */
 952                         spin_lock_irqsave(&priv->lock, flags);
 953                         priv->tmp_termios = *(tty->termios);
 954                         spin_unlock_irqrestore(&priv->lock, flags);
 955                 } else {
 956                         dbg("%s - nothing to do, exiting", __FUNCTION__);
 957                         return;
 958                 }
 959         } else
 960                 return;
 961
 962         /* set number of data bits, parity, stop bits */
 963         /* when parity is disabled the parity type bit is ignored */
 964
 965         stop_bits = cflag & CSTOPB ? 1 : 0; /* 1 means 2 stop bits, 0 means 1 stop bit */
 966
 967         if (cflag & PARENB) {
 968                 parity_enable = 1;
 969                 parity_type = cflag & PARODD ? 1 : 0; /* 1 means odd parity, 0 means even parity */
 970         } else
 971                 parity_enable = parity_type = 0;
 972
 973         if (cflag & CSIZE) {
 974                 switch (cflag & CSIZE) {
 975                         case CS5: data_bits = 0; break;
 976                         case CS6: data_bits = 1; break;
 977                         case CS7: data_bits = 2; break;
 978                         case CS8: data_bits = 3; break;
 979                         default: err("%s - CSIZE was set, but not CS5-CS8", __FUNCTION__); data_bits = 3;
 980                 }
 981         } else
 982                 data_bits = 3;
 983
 984         spin_lock_irqsave(&priv->lock, flags);
 985         oldlines = priv->line_control;
 986         if ((cflag & CBAUD) == B0) {
 987                 /* drop dtr and rts */
 988                 dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
 989                 baud_mask = B0;
 990                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 991         } else {
 992                 baud_mask = (cflag & CBAUD);
 993                 switch(baud_mask) {
 994                         case B300: dbg("%s - setting baud 300bps", __FUNCTION__); break;
 995                         case B600: dbg("%s - setting baud 600bps", __FUNCTION__); break;
 996                         case B1200: dbg("%s - setting baud 1200bps", __FUNCTION__); break;
 997                         case B2400: dbg("%s - setting baud 2400bps", __FUNCTION__); break;
 998                         case B4800: dbg("%s - setting baud 4800bps", __FUNCTION__); break;
 999                         case B9600: dbg("%s - setting baud 9600bps", __FUNCTION__); break;
1000                         case B19200: dbg("%s - setting baud 19200bps", __FUNCTION__); break;
1001                         case B38400: dbg("%s - setting baud 38400bps", __FUNCTION__); break;
1002                         case B57600: dbg("%s - setting baud 57600bps", __FUNCTION__); break;
1003                         case B115200: dbg("%s - setting baud 115200bps", __FUNCTION__); break;
1004                         default: dbg("%s - unknown masked baud rate", __FUNCTION__);
1005                 }
1006                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1007         }
1008         spin_unlock_irqrestore(&priv->lock, flags);
1009
1010         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)", __FUNCTION__,
1011             stop_bits, parity_enable, parity_type, data_bits);
1012
1013         cypress_serial_control(port, baud_mask, data_bits, stop_bits, parity_enable,
1014                                parity_type, 0, CYPRESS_SET_CONFIG);
1015
1016         /* we perform a CYPRESS_GET_CONFIG so that the current settings are filled into the private structure
1017          * this should confirm that all is working if it returns what we just set */
1018         cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1019
1020         /* Here we can define custom tty settings for devices
1021          *
1022          * the main tty termios flag base comes from empeg.c
1023          */
1024
1025         spin_lock_irqsave(&priv->lock, flags);
1026         if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
1027
1028                 dbg("Using custom termios settings for a baud rate of 4800bps.");
1029                 /* define custom termios settings for NMEA protocol */
1030
1031                 tty->termios->c_iflag /* input modes - */
1032                         &= ~(IGNBRK             /* disable ignore break */
1033                         | BRKINT                /* disable break causes interrupt */
1034                         | PARMRK                /* disable mark parity errors */
1035                         | ISTRIP                /* disable clear high bit of input characters */
1036                         | INLCR                 /* disable translate NL to CR */
1037                         | IGNCR                 /* disable ignore CR */
1038                         | ICRNL                 /* disable translate CR to NL */
1039                         | IXON);                /* disable enable XON/XOFF flow control */
1040
1041                 tty->termios->c_oflag /* output modes */
1042                         &= ~OPOST;              /* disable postprocess output characters */
1043
1044                 tty->termios->c_lflag /* line discipline modes */
1045                         &= ~(ECHO               /* disable echo input characters */
1046                         | ECHONL                /* disable echo new line */
1047                         | ICANON                /* disable erase, kill, werase, and rprnt special characters */
1048                         | ISIG                  /* disable interrupt, quit, and suspend special characters */
1049                         | IEXTEN);              /* disable non-POSIX special characters */
1050
1051         } /* CT_CYPHIDCOM: Application should handle this for device */
1052
1053         linechange = (priv->line_control != oldlines);
1054         spin_unlock_irqrestore(&priv->lock, flags);
1055
1056         /* if necessary, set lines */
1057         if (linechange) {
1058                 priv->cmd_ctrl = 1;
1059                 cypress_write(port, NULL, 0);
1060         }
1061 } /* cypress_set_termios */
1062
1063
1064 /* returns amount of data still left in soft buffer */
1065 static int cypress_chars_in_buffer(struct usb_serial_port *port)
1066 {
1067         struct cypress_private *priv = usb_get_serial_port_data(port);
1068         int chars = 0;
1069         unsigned long flags;
1070
1071         dbg("%s - port %d", __FUNCTION__, port->number);
1072
1073         spin_lock_irqsave(&priv->lock, flags);
1074         chars = cypress_buf_data_avail(priv->buf);
1075         spin_unlock_irqrestore(&priv->lock, flags);
1076
1077         dbg("%s - returns %d", __FUNCTION__, chars);
1078         return chars;
1079 }
1080
1081
1082 static void cypress_throttle (struct usb_serial_port *port)
1083 {
1084         struct cypress_private *priv = usb_get_serial_port_data(port);
1085         unsigned long flags;
1086
1087         dbg("%s - port %d", __FUNCTION__, port->number);
1088
1089         spin_lock_irqsave(&priv->lock, flags);
1090         priv->rx_flags = THROTTLED;
1091         spin_unlock_irqrestore(&priv->lock, flags);
1092 }
1093
1094
1095 static void cypress_unthrottle (struct usb_serial_port *port)
1096 {
1097         struct cypress_private *priv = usb_get_serial_port_data(port);
1098         int actually_throttled, result;
1099         unsigned long flags;
1100
1101         dbg("%s - port %d", __FUNCTION__, port->number);
1102
1103         spin_lock_irqsave(&priv->lock, flags);
1104         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1105         priv->rx_flags = 0;
1106         spin_unlock_irqrestore(&priv->lock, flags);
1107
1108         if (actually_throttled) {
1109                 port->interrupt_in_urb->dev = port->serial->dev;
1110
1111                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1112                 if (result)
1113                         dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
1114         }
1115 }
1116
1117
1118 static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
1119 {
1120         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1121         struct cypress_private *priv = usb_get_serial_port_data(port);
1122         struct tty_struct *tty;
1123         unsigned char *data = urb->transfer_buffer;
1124         unsigned long flags;
1125         char tty_flag = TTY_NORMAL;
1126         int havedata = 0;
1127         int bytes = 0;
1128         int result;
1129         int i = 0;
1130
1131         dbg("%s - port %d", __FUNCTION__, port->number);
1132
1133         if (urb->status) {
1134                 dbg("%s - nonzero read status received: %d", __FUNCTION__, urb->status);
1135                 return;
1136         }
1137
1138         spin_lock_irqsave(&priv->lock, flags);
1139         if (priv->rx_flags & THROTTLED) {
1140                 dbg("%s - now throttling", __FUNCTION__);
1141                 priv->rx_flags |= ACTUALLY_THROTTLED;
1142                 spin_unlock_irqrestore(&priv->lock, flags);
1143                 return;
1144         }
1145         spin_unlock_irqrestore(&priv->lock, flags);
1146
1147         tty = port->tty;
1148         if (!tty) {
1149                 dbg("%s - bad tty pointer - exiting", __FUNCTION__);
1150                 return;
1151         }
1152
1153         spin_lock_irqsave(&priv->lock, flags);
1154         switch(urb->actual_length) {
1155                 case 32:
1156                         /* This is for the CY7C64013... */
1157                         priv->current_status = data[0] & 0xF8;
1158                         bytes = data[1]+2;
1159                         i=2;
1160                         if (bytes > 2)
1161                                 havedata = 1;
1162                         break;
1163                 case 8:
1164                         /* This is for the CY7C63743... */
1165                         priv->current_status = data[0] & 0xF8;
1166                         bytes = (data[0] & 0x07)+1;
1167                         i=1;
1168                         if (bytes > 1)
1169                                 havedata = 1;
1170                         break;
1171                 default:
1172                         dbg("%s - wrong packet size - received %d bytes", __FUNCTION__, urb->actual_length);
1173                         spin_unlock_irqrestore(&priv->lock, flags);
1174                         goto continue_read;
1175         }
1176         spin_unlock_irqrestore(&priv->lock, flags);
1177
1178         usb_serial_debug_data (debug, &port->dev, __FUNCTION__, urb->actual_length, data);
1179
1180         spin_lock_irqsave(&priv->lock, flags);
1181         /* check to see if status has changed */
1182         if (priv != NULL) {
1183                 if (priv->current_status != priv->prev_status) {
1184                         priv->diff_status |= priv->current_status ^ priv->prev_status;
1185                         wake_up_interruptible(&priv->delta_msr_wait);
1186                         priv->prev_status = priv->current_status;
1187                 }
1188         }
1189         spin_unlock_irqrestore(&priv->lock, flags);
1190
1191         /* hangup, as defined in acm.c... this might be a bad place for it though */
1192         if (tty && !(tty->termios->c_cflag & CLOCAL) && !(priv->current_status & UART_CD)) {
1193                 dbg("%s - calling hangup", __FUNCTION__);
1194                 tty_hangup(tty);
1195                 goto continue_read;
1196         }
1197
1198         /* There is one error bit... I'm assuming it is a parity error indicator
1199          * as the generic firmware will set this bit to 1 if a parity error occurs.
1200          * I can not find reference to any other error events.
1201          *
1202          */
1203         spin_lock_irqsave(&priv->lock, flags);
1204         if (priv->current_status & CYP_ERROR) {
1205                 spin_unlock_irqrestore(&priv->lock, flags);
1206                 tty_flag = TTY_PARITY;
1207                 dbg("%s - Parity Error detected", __FUNCTION__);
1208         } else
1209                 spin_unlock_irqrestore(&priv->lock, flags);
1210
1211         /* process read if there is data other than line status */
1212         if (tty && (bytes > i)) {
1213                 for (; i < bytes ; ++i) {
1214                         dbg("pushing byte number %d - %d - %c",i,data[i],data[i]);
1215                         if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
1216                                 tty_flip_buffer_push(tty);
1217                         }
1218                         tty_insert_flip_char(tty, data[i], tty_flag);
1219                 }
1220                 tty_flip_buffer_push(port->tty);
1221         }
1222
1223         spin_lock_irqsave(&priv->lock, flags);
1224         priv->bytes_in += bytes;  /* control and status byte(s) are also counted */
1225         spin_unlock_irqrestore(&priv->lock, flags);
1226
1227 continue_read:
1228
1229         /* Continue trying to always read... unless the port has closed.  */
1230
1231         if (port->open_count > 0) {
1232         usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1233                 usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress),
1234                 port->interrupt_in_urb->transfer_buffer,
1235                 port->interrupt_in_urb->transfer_buffer_length,
1236                 cypress_read_int_callback, port,
1237                 interval);
1238         result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1239         if (result)
1240                 dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
1241         }
1242
1243         return;
1244 } /* cypress_read_int_callback */
1245
1246
1247 static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs)
1248 {
1249         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1250         struct cypress_private *priv = usb_get_serial_port_data(port);
1251         int result;
1252
1253         dbg("%s - port %d", __FUNCTION__, port->number);
1254
1255         switch (urb->status) {
1256                 case 0:
1257                         /* success */
1258                         break;
1259                 case -ECONNRESET:
1260                 case -ENOENT:
1261                 case -ESHUTDOWN:
1262                         /* this urb is terminated, clean up */
1263                         dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
1264                         priv->write_urb_in_use = 0;
1265                         return;
1266                 case -EPIPE: /* no break needed */
1267                         usb_clear_halt(port->serial->dev, 0x02);
1268                 default:
1269                         /* error in the urb, so we have to resubmit it */
1270                         dbg("%s - Overflow in write", __FUNCTION__);
1271                         dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
1272                         port->interrupt_out_urb->transfer_buffer_length = 1;
1273                         port->interrupt_out_urb->dev = port->serial->dev;
1274                         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1275                         if (result)
1276                                 dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
1277                                         __FUNCTION__, result);
1278                         else
1279                                 return;
1280         }
1281
1282         priv->write_urb_in_use = 0;
1283
1284         /* send any buffered data */
1285         cypress_send(port);
1286 }
1287
1288
1289 /*****************************************************************************
1290  * Write buffer functions - buffering code from pl2303 used
1291  *****************************************************************************/
1292
1293 /*
1294  * cypress_buf_alloc
1295  *
1296  * Allocate a circular buffer and all associated memory.
1297  */
1298
1299 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1300 {
1301
1302         struct cypress_buf *cb;
1303
1304
1305         if (size == 0)
1306                 return NULL;
1307
1308         cb = (struct cypress_buf *)kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1309         if (cb == NULL)
1310                 return NULL;
1311
1312         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1313         if (cb->buf_buf == NULL) {
1314                 kfree(cb);
1315                 return NULL;
1316         }
1317
1318         cb->buf_size = size;
1319         cb->buf_get = cb->buf_put = cb->buf_buf;
1320
1321         return cb;
1322
1323 }
1324
1325
1326 /*
1327  * cypress_buf_free
1328  *
1329  * Free the buffer and all associated memory.
1330  */
1331
1332 static void cypress_buf_free(struct cypress_buf *cb)
1333 {
1334         if (cb) {
1335                 kfree(cb->buf_buf);
1336                 kfree(cb);
1337         }
1338 }
1339
1340
1341 /*
1342  * cypress_buf_clear
1343  *
1344  * Clear out all data in the circular buffer.
1345  */
1346
1347 static void cypress_buf_clear(struct cypress_buf *cb)
1348 {
1349         if (cb != NULL)
1350                 cb->buf_get = cb->buf_put;
1351                 /* equivalent to a get of all data available */
1352 }
1353
1354
1355 /*
1356  * cypress_buf_data_avail
1357  *
1358  * Return the number of bytes of data available in the circular
1359  * buffer.
1360  */
1361
1362 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1363 {
1364         if (cb != NULL)
1365                 return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
1366         else
1367                 return 0;
1368 }
1369
1370
1371 /*
1372  * cypress_buf_space_avail
1373  *
1374  * Return the number of bytes of space available in the circular
1375  * buffer.
1376  */
1377
1378 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1379 {
1380         if (cb != NULL)
1381                 return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
1382         else
1383                 return 0;
1384 }
1385
1386
1387 /*
1388  * cypress_buf_put
1389  *
1390  * Copy data data from a user buffer and put it into the circular buffer.
1391  * Restrict to the amount of space available.
1392  *
1393  * Return the number of bytes copied.
1394  */
1395
1396 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1397         unsigned int count)
1398 {
1399
1400         unsigned int len;
1401
1402
1403         if (cb == NULL)
1404                 return 0;
1405
1406         len  = cypress_buf_space_avail(cb);
1407         if (count > len)
1408                 count = len;
1409
1410         if (count == 0)
1411                 return 0;
1412
1413         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1414         if (count > len) {
1415                 memcpy(cb->buf_put, buf, len);
1416                 memcpy(cb->buf_buf, buf+len, count - len);
1417                 cb->buf_put = cb->buf_buf + count - len;
1418         } else {
1419                 memcpy(cb->buf_put, buf, count);
1420                 if (count < len)
1421                         cb->buf_put += count;
1422                 else /* count == len */
1423                         cb->buf_put = cb->buf_buf;
1424         }
1425
1426         return count;
1427
1428 }
1429
1430
1431 /*
1432  * cypress_buf_get
1433  *
1434  * Get data from the circular buffer and copy to the given buffer.
1435  * Restrict to the amount of data available.
1436  *
1437  * Return the number of bytes copied.
1438  */
1439
1440 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1441         unsigned int count)
1442 {
1443
1444         unsigned int len;
1445
1446
1447         if (cb == NULL)
1448                 return 0;
1449
1450         len = cypress_buf_data_avail(cb);
1451         if (count > len)
1452                 count = len;
1453
1454         if (count == 0)
1455                 return 0;
1456
1457         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1458         if (count > len) {
1459                 memcpy(buf, cb->buf_get, len);
1460                 memcpy(buf+len, cb->buf_buf, count - len);
1461                 cb->buf_get = cb->buf_buf + count - len;
1462         } else {
1463                 memcpy(buf, cb->buf_get, count);
1464                 if (count < len)
1465                         cb->buf_get += count;
1466                 else /* count == len */
1467                         cb->buf_get = cb->buf_buf;
1468         }
1469
1470         return count;
1471
1472 }
1473
1474 /*****************************************************************************
1475  * Module functions
1476  *****************************************************************************/
1477
1478 static int __init cypress_init(void)
1479 {
1480         int retval;
1481
1482         dbg("%s", __FUNCTION__);
1483
1484         retval = usb_serial_register(&cypress_earthmate_device);
1485         if (retval)
1486                 goto failed_em_register;
1487         retval = usb_serial_register(&cypress_hidcom_device);
1488         if (retval)
1489                 goto failed_hidcom_register;
1490         retval = usb_register(&cypress_driver);
1491         if (retval)
1492                 goto failed_usb_register;
1493
1494         info(DRIVER_DESC " " DRIVER_VERSION);
1495         return 0;
1496 failed_usb_register:
1497         usb_deregister(&cypress_driver);
1498 failed_hidcom_register:
1499         usb_serial_deregister(&cypress_hidcom_device);
1500 failed_em_register:
1501         usb_serial_deregister(&cypress_earthmate_device);
1502
1503         return retval;
1504 }
1505
1506
1507 static void __exit cypress_exit (void)
1508 {
1509         dbg("%s", __FUNCTION__);
1510
1511         usb_deregister (&cypress_driver);
1512         usb_serial_deregister (&cypress_earthmate_device);
1513         usb_serial_deregister (&cypress_hidcom_device);
1514 }
1515
1516
1517 module_init(cypress_init);
1518 module_exit(cypress_exit);
1519
1520 MODULE_AUTHOR( DRIVER_AUTHOR );
1521 MODULE_DESCRIPTION( DRIVER_DESC );
1522 MODULE_VERSION( DRIVER_VERSION );
1523 MODULE_LICENSE("GPL");
1524
1525 module_param(debug, bool, S_IRUGO | S_IWUSR);
1526 MODULE_PARM_DESC(debug, "Debug enabled or not");
1527 module_param(stats, bool, S_IRUGO | S_IWUSR);
1528 MODULE_PARM_DESC(stats, "Enable statistics or not");
1529 module_param(interval, int, S_IRUGO | S_IWUSR);
1530 MODULE_PARM_DESC(interval, "Overrides interrupt interval");