git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/ipw.c

   1 /*
   2  * IPWireless 3G UMTS TDD Modem driver (USB connected)
   3  *
   4  *   Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
   5  *   Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
   6  *
   7  *   This program is free software; you can redistribute it and/or modify
   8  *   it under the terms of the GNU General Public License as published by
   9  *   the Free Software Foundation; either version 2 of the License, or
  10  *   (at your option) any later version.
  11  *
  12  * All information about the device was acquired using SnoopyPro
  13  * on MSFT's O/S, and examing the MSFT drivers' debug output
  14  * (insanely left _on_ in the enduser version)
  15  *
  16  * It was written out of frustration with the IPWireless USB modem
  17  * supplied by Axity3G/Sentech South Africa not supporting
  18  * Linux whatsoever.
  19  *
  20  * Nobody provided any proprietary information that was not already
  21  * available for this device.
  22  *
  23  * The modem adheres to the "3GPP TS  27.007 AT command set for 3G
  24  * User Equipment (UE)" standard, available from
  25  * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
  26  *
  27  * The code was only tested the IPWireless handheld modem distributed
  28  * in South Africa by Sentech.
  29  *
  30  * It may work for Woosh Inc in .nz too, as it appears they use the
  31  * same kit.
  32  *
  33  * There is still some work to be done in terms of handling
  34  * DCD, DTR, RTS, CTS which are currently faked.
  35  * It's good enough for PPP at this point. It's based off all kinds of
  36  * code found in usb/serial and usb/class
  37  *
  38  */
  39
  40 #include <linux/kernel.h>
  41 #include <linux/errno.h>
  42 #include <linux/init.h>
  43 #include <linux/slab.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_flip.h>
  46 #include <linux/module.h>
  47 #include <linux/spinlock.h>
  48 #include <linux/usb.h>
  49 #include <linux/usb/serial.h>
  50 #include <linux/uaccess.h>
  51
  52 /*
  53  * Version Information
  54  */
  55 #define DRIVER_VERSION  "v0.3"
  56 #define DRIVER_AUTHOR   "Roelf Diedericks"
  57 #define DRIVER_DESC     "IPWireless tty driver"
  58
  59 #define IPW_TTY_MAJOR   240     /* real device node major id, experimental range */
  60 #define IPW_TTY_MINORS  256     /* we support 256 devices, dunno why, it'd be insane :) */
  61
  62 #define USB_IPW_MAGIC   0x6d02  /* magic number for ipw struct */
  63
  64
  65 /* Message sizes */
  66 #define EVENT_BUFFER_SIZE       0xFF
  67 #define CHAR2INT16(c1, c0)      (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
  68 #define NUM_BULK_URBS           24
  69 #define NUM_CONTROL_URBS        16
  70
  71 /* vendor/product pairs that are known work with this driver*/
  72 #define IPW_VID         0x0bc3
  73 #define IPW_PID         0x0001
  74
  75
  76 /* Vendor commands: */
  77
  78 /* baud rates */
  79 enum {
  80         ipw_sio_b256000 = 0x000e,
  81         ipw_sio_b128000 = 0x001d,
  82         ipw_sio_b115200 = 0x0020,
  83         ipw_sio_b57600  = 0x0040,
  84         ipw_sio_b56000  = 0x0042,
  85         ipw_sio_b38400  = 0x0060,
  86         ipw_sio_b19200  = 0x00c0,
  87         ipw_sio_b14400  = 0x0100,
  88         ipw_sio_b9600   = 0x0180,
  89         ipw_sio_b4800   = 0x0300,
  90         ipw_sio_b2400   = 0x0600,
  91         ipw_sio_b1200   = 0x0c00,
  92         ipw_sio_b600    = 0x1800
  93 };
  94
  95 /* data bits */
  96 #define ipw_dtb_7               0x700
  97 #define ipw_dtb_8               0x810   /* ok so the define is misleading, I know, but forces 8,n,1 */
  98                                         /* I mean, is there a point to any other setting these days? :) */
  99
 100 /* usb control request types : */
 101 #define IPW_SIO_RXCTL           0x00    /* control bulk rx channel transmissions, value=1/0 (on/off) */
 102 #define IPW_SIO_SET_BAUD        0x01    /* set baud, value=requested ipw_sio_bxxxx */
 103 #define IPW_SIO_SET_LINE        0x03    /* set databits, parity. value=ipw_dtb_x */
 104 #define IPW_SIO_SET_PIN         0x03    /* set/clear dtr/rts value=ipw_pin_xxx */
 105 #define IPW_SIO_POLL            0x08    /* get serial port status byte, call with value=0 */
 106 #define IPW_SIO_INIT            0x11    /* initializes ? value=0 (appears as first thing todo on open) */
 107 #define IPW_SIO_PURGE           0x12    /* purge all transmissions?, call with value=numchar_to_purge */
 108 #define IPW_SIO_HANDFLOW        0x13    /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */
 109 #define IPW_SIO_SETCHARS        0x13    /* set the flowcontrol special chars, value=0, buf=6 bytes, */
 110                                         /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */
 111
 112 /* values used for request IPW_SIO_SET_PIN */
 113 #define IPW_PIN_SETDTR          0x101
 114 #define IPW_PIN_SETRTS          0x202
 115 #define IPW_PIN_CLRDTR          0x100
 116 #define IPW_PIN_CLRRTS          0x200 /* unconfirmed */
 117
 118 /* values used for request IPW_SIO_RXCTL */
 119 #define IPW_RXBULK_ON           1
 120 #define IPW_RXBULK_OFF          0
 121
 122 /* various 16 byte hardcoded transferbuffers used by flow control */
 123 #define IPW_BYTES_FLOWINIT      { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \
 124                                         0, 0, 0, 0, 0, 0, 0, 0 }
 125
 126 /* Interpretation of modem status lines */
 127 /* These need sorting out by individually connecting pins and checking
 128  * results. FIXME!
 129  * When data is being sent we see 0x30 in the lower byte; this must
 130  * contain DSR and CTS ...
 131  */
 132 #define IPW_DSR                 ((1<<4) | (1<<5))
 133 #define IPW_CTS                 ((1<<5) | (1<<4))
 134
 135 #define IPW_WANTS_TO_SEND       0x30
 136
 137 static struct usb_device_id usb_ipw_ids[] = {
 138         { USB_DEVICE(IPW_VID, IPW_PID) },
 139         { },
 140 };
 141
 142 MODULE_DEVICE_TABLE(usb, usb_ipw_ids);
 143
 144 static struct usb_driver usb_ipw_driver = {
 145         .name =         "ipwtty",
 146         .probe =        usb_serial_probe,
 147         .disconnect =   usb_serial_disconnect,
 148         .id_table =     usb_ipw_ids,
 149         .no_dynamic_id =        1,
 150 };
 151
 152 static int debug;
 153
 154 static void ipw_read_bulk_callback(struct urb *urb)
 155 {
 156         struct usb_serial_port *port = urb->context;
 157         unsigned char *data = urb->transfer_buffer;
 158         struct tty_struct *tty;
 159         int result;
 160         int status = urb->status;
 161
 162         dbg("%s - port %d", __func__, port->number);
 163
 164         if (status) {
 165                 dbg("%s - nonzero read bulk status received: %d",
 166                     __func__, status);
 167                 return;
 168         }
 169
 170         usb_serial_debug_data(debug, &port->dev, __func__,
 171                                         urb->actual_length, data);
 172
 173         tty = tty_port_tty_get(&port->port);
 174         if (tty && urb->actual_length) {
 175                 tty_buffer_request_room(tty, urb->actual_length);
 176                 tty_insert_flip_string(tty, data, urb->actual_length);
 177                 tty_flip_buffer_push(tty);
 178         }
 179         tty_kref_put(tty);
 180
 181         /* Continue trying to always read  */
 182         usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 183                           usb_rcvbulkpipe(port->serial->dev,
 184                                            port->bulk_in_endpointAddress),
 185                           port->read_urb->transfer_buffer,
 186                           port->read_urb->transfer_buffer_length,
 187                           ipw_read_bulk_callback, port);
 188         result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 189         if (result)
 190                 dev_err(&port->dev,
 191                         "%s - failed resubmitting read urb, error %d\n",
 192                                                         __func__, result);
 193         return;
 194 }
 195
 196 static int ipw_open(struct tty_struct *tty,
 197                         struct usb_serial_port *port, struct file *filp)
 198 {
 199         struct usb_device *dev = port->serial->dev;
 200         u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
 201         u8 *buf_flow_init;
 202         int result;
 203
 204         dbg("%s", __func__);
 205
 206         buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
 207         if (!buf_flow_init)
 208                 return -ENOMEM;
 209
 210         if (tty)
 211                 tty->low_latency = 1;
 212
 213         /* --1: Tell the modem to initialize (we think) From sniffs this is
 214          *      always the first thing that gets sent to the modem during
 215          *      opening of the device */
 216         dbg("%s: Sending SIO_INIT (we guess)", __func__);
 217         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 218                          IPW_SIO_INIT,
 219                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 220                          0,
 221                          0, /* index */
 222                          NULL,
 223                          0,
 224                          100000);
 225         if (result < 0)
 226                 dev_err(&port->dev,
 227                         "Init of modem failed (error = %d)\n", result);
 228
 229         /* reset the bulk pipes */
 230         usb_clear_halt(dev,
 231                         usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
 232         usb_clear_halt(dev,
 233                         usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
 234
 235         /*--2: Start reading from the device */
 236         dbg("%s: setting up bulk read callback", __func__);
 237         usb_fill_bulk_urb(port->read_urb, dev,
 238                           usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
 239                           port->bulk_in_buffer,
 240                           port->bulk_in_size,
 241                           ipw_read_bulk_callback, port);
 242         result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 243         if (result < 0)
 244                 dbg("%s - usb_submit_urb(read bulk) failed with status %d",
 245                                                         __func__, result);
 246
 247         /*--3: Tell the modem to open the floodgates on the rx bulk channel */
 248         dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
 249         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 250                          IPW_SIO_RXCTL,
 251                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 252                          IPW_RXBULK_ON,
 253                          0, /* index */
 254                          NULL,
 255                          0,
 256                          100000);
 257         if (result < 0)
 258                 dev_err(&port->dev,
 259                         "Enabling bulk RxRead failed (error = %d)\n", result);
 260
 261         /*--4: setup the initial flowcontrol */
 262         dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init);
 263         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 264                          IPW_SIO_HANDFLOW,
 265                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 266                          0,
 267                          0,
 268                          buf_flow_init,
 269                          0x10,
 270                          200000);
 271         if (result < 0)
 272                 dev_err(&port->dev,
 273                         "initial flowcontrol failed (error = %d)\n", result);
 274
 275
 276         /*--5: raise the dtr */
 277         dbg("%s:raising dtr", __func__);
 278         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 279                          IPW_SIO_SET_PIN,
 280                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 281                          IPW_PIN_SETDTR,
 282                          0,
 283                          NULL,
 284                          0,
 285                          200000);
 286         if (result < 0)
 287                 dev_err(&port->dev,
 288                                 "setting dtr failed (error = %d)\n", result);
 289
 290         /*--6: raise the rts */
 291         dbg("%s:raising rts", __func__);
 292         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 293                          IPW_SIO_SET_PIN,
 294                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 295                          IPW_PIN_SETRTS,
 296                          0,
 297                          NULL,
 298                          0,
 299                          200000);
 300         if (result < 0)
 301                 dev_err(&port->dev,
 302                                 "setting dtr failed (error = %d)\n", result);
 303
 304         kfree(buf_flow_init);
 305         return 0;
 306 }
 307
 308 static void ipw_close(struct tty_struct *tty,
 309                         struct usb_serial_port *port, struct file *filp)
 310 {
 311         struct usb_device *dev = port->serial->dev;
 312         int result;
 313
 314         if (tty_hung_up_p(filp)) {
 315                 dbg("%s: tty_hung_up_p ...", __func__);
 316                 return;
 317         }
 318
 319         /*--1: drop the dtr */
 320         dbg("%s:dropping dtr", __func__);
 321         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 322                          IPW_SIO_SET_PIN,
 323                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 324                          IPW_PIN_CLRDTR,
 325                          0,
 326                          NULL,
 327                          0,
 328                          200000);
 329         if (result < 0)
 330                 dev_err(&port->dev, "dropping dtr failed (error = %d)\n",
 331                                                                 result);
 332
 333         /*--2: drop the rts */
 334         dbg("%s:dropping rts", __func__);
 335         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 336                          IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
 337                                         USB_RECIP_INTERFACE | USB_DIR_OUT,
 338                          IPW_PIN_CLRRTS,
 339                          0,
 340                          NULL,
 341                          0,
 342                          200000);
 343         if (result < 0)
 344                 dev_err(&port->dev,
 345                                 "dropping rts failed (error = %d)\n", result);
 346
 347
 348         /*--3: purge */
 349         dbg("%s:sending purge", __func__);
 350         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 351                          IPW_SIO_PURGE, USB_TYPE_VENDOR |
 352                                         USB_RECIP_INTERFACE | USB_DIR_OUT,
 353                          0x03,
 354                          0,
 355                          NULL,
 356                          0,
 357                          200000);
 358         if (result < 0)
 359                 dev_err(&port->dev, "purge failed (error = %d)\n", result);
 360
 361
 362         /* send RXBULK_off (tell modem to stop transmitting bulk data on
 363            rx chan) */
 364         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 365                          IPW_SIO_RXCTL,
 366                          USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 367                          IPW_RXBULK_OFF,
 368                          0, /* index */
 369                          NULL,
 370                          0,
 371                          100000);
 372
 373         if (result < 0)
 374                 dev_err(&port->dev,
 375                         "Disabling bulk RxRead failed (error = %d)\n", result);
 376
 377         /* shutdown any in-flight urbs that we know about */
 378         usb_kill_urb(port->read_urb);
 379         usb_kill_urb(port->write_urb);
 380 }
 381
 382 static void ipw_write_bulk_callback(struct urb *urb)
 383 {
 384         struct usb_serial_port *port = urb->context;
 385         int status = urb->status;
 386
 387         dbg("%s", __func__);
 388
 389         port->write_urb_busy = 0;
 390
 391         if (status)
 392                 dbg("%s - nonzero write bulk status received: %d",
 393                     __func__, status);
 394
 395         usb_serial_port_softint(port);
 396 }
 397
 398 static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
 399                                         const unsigned char *buf, int count)
 400 {
 401         struct usb_device *dev = port->serial->dev;
 402         int ret;
 403
 404         dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
 405                 count, in_interrupt());
 406
 407         if (count == 0) {
 408                 dbg("%s - write request of 0 bytes", __func__);
 409                 return 0;
 410         }
 411
 412         spin_lock_bh(&port->lock);
 413         if (port->write_urb_busy) {
 414                 spin_unlock_bh(&port->lock);
 415                 dbg("%s - already writing", __func__);
 416                 return 0;
 417         }
 418         port->write_urb_busy = 1;
 419         spin_unlock_bh(&port->lock);
 420
 421         count = min(count, port->bulk_out_size);
 422         memcpy(port->bulk_out_buffer, buf, count);
 423
 424         dbg("%s count now:%d", __func__, count);
 425
 426         usb_fill_bulk_urb(port->write_urb, dev,
 427                           usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
 428                           port->write_urb->transfer_buffer,
 429                           count,
 430                           ipw_write_bulk_callback,
 431                           port);
 432
 433         ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 434         if (ret != 0) {
 435                 port->write_urb_busy = 0;
 436                 dbg("%s - usb_submit_urb(write bulk) failed with error = %d",
 437                                                                 __func__, ret);
 438                 return ret;
 439         }
 440
 441         dbg("%s returning %d", __func__, count);
 442         return count;
 443 }
 444
 445 static int ipw_probe(struct usb_serial_port *port)
 446 {
 447         return 0;
 448 }
 449
 450 static int ipw_disconnect(struct usb_serial_port *port)
 451 {
 452         usb_set_serial_port_data(port, NULL);
 453         return 0;
 454 }
 455
 456 static struct usb_serial_driver ipw_device = {
 457         .driver = {
 458                 .owner =        THIS_MODULE,
 459                 .name =         "ipw",
 460         },
 461         .description =          "IPWireless converter",
 462         .usb_driver =           &usb_ipw_driver,
 463         .id_table =             usb_ipw_ids,
 464         .num_ports =            1,
 465         .open =                 ipw_open,
 466         .close =                ipw_close,
 467         .port_probe =           ipw_probe,
 468         .port_remove =          ipw_disconnect,
 469         .write =                ipw_write,
 470         .write_bulk_callback =  ipw_write_bulk_callback,
 471         .read_bulk_callback =   ipw_read_bulk_callback,
 472 };
 473
 474
 475
 476 static int usb_ipw_init(void)
 477 {
 478         int retval;
 479
 480         retval = usb_serial_register(&ipw_device);
 481         if (retval)
 482                 return retval;
 483         retval = usb_register(&usb_ipw_driver);
 484         if (retval) {
 485                 usb_serial_deregister(&ipw_device);
 486                 return retval;
 487         }
 488         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 489                DRIVER_DESC "\n");
 490         return 0;
 491 }
 492
 493 static void usb_ipw_exit(void)
 494 {
 495         usb_deregister(&usb_ipw_driver);
 496         usb_serial_deregister(&ipw_device);
 497 }
 498
 499 module_init(usb_ipw_init);
 500 module_exit(usb_ipw_exit);
 501
 502 /* Module information */
 503 MODULE_AUTHOR(DRIVER_AUTHOR);
 504 MODULE_DESCRIPTION(DRIVER_DESC);
 505 MODULE_LICENSE("GPL");
 506
 507 module_param(debug, bool, S_IRUGO | S_IWUSR);
 508 MODULE_PARM_DESC(debug, "Debug enabled or not");