smack: Fix missing calls to netlbl_skbuff_err()
[linux-2.6] / include / acpi / acmacros.h
1 /******************************************************************************
2  *
3  * Name: acmacros.h - C macros for the entire subsystem.
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2008, Intel Corp.
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #ifndef __ACMACROS_H__
45 #define __ACMACROS_H__
46
47 /*
48  * Data manipulation macros
49  */
50 #define ACPI_LOWORD(l)                  ((u16)(u32)(l))
51 #define ACPI_HIWORD(l)                  ((u16)((((u32)(l)) >> 16) & 0xFFFF))
52 #define ACPI_LOBYTE(l)                  ((u8)(u16)(l))
53 #define ACPI_HIBYTE(l)                  ((u8)((((u16)(l)) >> 8) & 0xFF))
54
55 #define ACPI_SET_BIT(target,bit)        ((target) |= (bit))
56 #define ACPI_CLEAR_BIT(target,bit)      ((target) &= ~(bit))
57 #define ACPI_MIN(a,b)                   (((a)<(b))?(a):(b))
58 #define ACPI_MAX(a,b)                   (((a)>(b))?(a):(b))
59
60 /* Size calculation */
61
62 #define ACPI_ARRAY_LENGTH(x)            (sizeof(x) / sizeof((x)[0]))
63
64 /*
65  * Extract data using a pointer.  Any more than a byte and we
66  * get into potential aligment issues -- see the STORE macros below.
67  * Use with care.
68  */
69 #define ACPI_GET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
70 #define ACPI_GET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
71 #define ACPI_GET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
72 #define ACPI_GET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
73 #define ACPI_SET8(ptr)                  *ACPI_CAST_PTR (u8, ptr)
74 #define ACPI_SET16(ptr)                 *ACPI_CAST_PTR (u16, ptr)
75 #define ACPI_SET32(ptr)                 *ACPI_CAST_PTR (u32, ptr)
76 #define ACPI_SET64(ptr)                 *ACPI_CAST_PTR (u64, ptr)
77
78 /*
79  * Pointer manipulation
80  */
81 #define ACPI_CAST_PTR(t, p)             ((t *) (acpi_uintptr_t) (p))
82 #define ACPI_CAST_INDIRECT_PTR(t, p)    ((t **) (acpi_uintptr_t) (p))
83 #define ACPI_ADD_PTR(t, a, b)           ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_size)(b)))
84 #define ACPI_PTR_DIFF(a, b)             (acpi_size) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
85
86 /* Pointer/Integer type conversions */
87
88 #define ACPI_TO_POINTER(i)              ACPI_ADD_PTR (void, (void *) NULL, (acpi_size) i)
89 #define ACPI_TO_INTEGER(p)              ACPI_PTR_DIFF (p,(void *) NULL)
90 #define ACPI_OFFSET(d,f)                (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
91 #define ACPI_PHYSADDR_TO_PTR(i)         ACPI_TO_POINTER(i)
92 #define ACPI_PTR_TO_PHYSADDR(i)         ACPI_TO_INTEGER(i)
93
94 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
95 #define ACPI_COMPARE_NAME(a,b)          (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
96 #else
97 #define ACPI_COMPARE_NAME(a,b)          (!ACPI_STRNCMP (ACPI_CAST_PTR (char,(a)), ACPI_CAST_PTR (char,(b)), ACPI_NAME_SIZE))
98 #endif
99
100 /*
101  * Full 64-bit integer must be available on both 32-bit and 64-bit platforms
102  */
103 struct acpi_integer_overlay {
104         u32 lo_dword;
105         u32 hi_dword;
106 };
107
108 #define ACPI_LODWORD(integer)           (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->lo_dword)
109 #define ACPI_HIDWORD(integer)           (ACPI_CAST_PTR (struct acpi_integer_overlay, &integer)->hi_dword)
110
111 /*
112  * printf() format helpers
113  */
114
115 /* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
116
117 #define ACPI_FORMAT_UINT64(i)           ACPI_HIDWORD(i),ACPI_LODWORD(i)
118
119 #if ACPI_MACHINE_WIDTH == 64
120 #define ACPI_FORMAT_NATIVE_UINT(i)      ACPI_FORMAT_UINT64(i)
121 #else
122 #define ACPI_FORMAT_NATIVE_UINT(i)      0, (i)
123 #endif
124
125 /*
126  * Macros for moving data around to/from buffers that are possibly unaligned.
127  * If the hardware supports the transfer of unaligned data, just do the store.
128  * Otherwise, we have to move one byte at a time.
129  */
130 #ifdef ACPI_BIG_ENDIAN
131 /*
132  * Macros for big-endian machines
133  */
134
135 /* This macro sets a buffer index, starting from the end of the buffer */
136
137 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) ((buf_len) - (((buf_offset)+1) * (byte_gran)))
138
139 /* These macros reverse the bytes during the move, converting little-endian to big endian */
140
141                           /* Big Endian      <==        Little Endian */
142                           /*  Hi...Lo                     Lo...Hi     */
143 /* 16-bit source, 16/32/64 destination */
144
145 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[1];\
146                                            ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[0];}
147
148 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d))=0;\
149                                                            ((u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
150                                                            ((u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
151
152 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
153                                                                          ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
154                                                                          ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
155
156 /* 32-bit source, 16/32/64 destination */
157
158 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
159
160 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[3];\
161                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[2];\
162                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[1];\
163                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[0];}
164
165 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d))=0;\
166                                                                                    ((u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
167                                                                                    ((u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
168                                                                                    ((u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
169                                                                                    ((u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
170
171 /* 64-bit source, 16/32/64 destination */
172
173 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
174
175 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
176
177 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[7];\
178                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[6];\
179                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[5];\
180                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[4];\
181                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[3];\
182                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[2];\
183                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[1];\
184                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[0];}
185 #else
186 /*
187  * Macros for little-endian machines
188  */
189
190 /* This macro sets a buffer index, starting from the beginning of the buffer */
191
192 #define ACPI_BUFFER_INDEX(buf_len,buf_offset,byte_gran) (buf_offset)
193
194 #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
195
196 /* The hardware supports unaligned transfers, just do the little-endian move */
197
198 /* 16-bit source, 16/32/64 destination */
199
200 #define ACPI_MOVE_16_TO_16(d,s)         *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
201 #define ACPI_MOVE_16_TO_32(d,s)         *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
202 #define ACPI_MOVE_16_TO_64(d,s)         *(u64 *)(void *)(d) = *(u16 *)(void *)(s)
203
204 /* 32-bit source, 16/32/64 destination */
205
206 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
207 #define ACPI_MOVE_32_TO_32(d,s)         *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
208 #define ACPI_MOVE_32_TO_64(d,s)         *(u64 *)(void *)(d) = *(u32 *)(void *)(s)
209
210 /* 64-bit source, 16/32/64 destination */
211
212 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
213 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
214 #define ACPI_MOVE_64_TO_64(d,s)         *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
215
216 #else
217 /*
218  * The hardware does not support unaligned transfers.  We must move the
219  * data one byte at a time.  These macros work whether the source or
220  * the destination (or both) is/are unaligned.  (Little-endian move)
221  */
222
223 /* 16-bit source, 16/32/64 destination */
224
225 #define ACPI_MOVE_16_TO_16(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
226                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];}
227
228 #define ACPI_MOVE_16_TO_32(d,s)         {(*(u32 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
229 #define ACPI_MOVE_16_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_16_TO_16(d,s);}
230
231 /* 32-bit source, 16/32/64 destination */
232
233 #define ACPI_MOVE_32_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
234
235 #define ACPI_MOVE_32_TO_32(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
236                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
237                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
238                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];}
239
240 #define ACPI_MOVE_32_TO_64(d,s)         {(*(u64 *)(void *)(d)) = 0; ACPI_MOVE_32_TO_32(d,s);}
241
242 /* 64-bit source, 16/32/64 destination */
243
244 #define ACPI_MOVE_64_TO_16(d,s)         ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
245 #define ACPI_MOVE_64_TO_32(d,s)         ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
246 #define ACPI_MOVE_64_TO_64(d,s)         {((  u8 *)(void *)(d))[0] = ((u8 *)(void *)(s))[0];\
247                                                                                  ((  u8 *)(void *)(d))[1] = ((u8 *)(void *)(s))[1];\
248                                                                                  ((  u8 *)(void *)(d))[2] = ((u8 *)(void *)(s))[2];\
249                                                                                  ((  u8 *)(void *)(d))[3] = ((u8 *)(void *)(s))[3];\
250                                                                                  ((  u8 *)(void *)(d))[4] = ((u8 *)(void *)(s))[4];\
251                                                                                  ((  u8 *)(void *)(d))[5] = ((u8 *)(void *)(s))[5];\
252                                                                                  ((  u8 *)(void *)(d))[6] = ((u8 *)(void *)(s))[6];\
253                                                                                  ((  u8 *)(void *)(d))[7] = ((u8 *)(void *)(s))[7];}
254 #endif
255 #endif
256
257 /* Macros based on machine integer width */
258
259 #if ACPI_MACHINE_WIDTH == 32
260 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_32_TO_16(d,s)
261
262 #elif ACPI_MACHINE_WIDTH == 64
263 #define ACPI_MOVE_SIZE_TO_16(d,s)       ACPI_MOVE_64_TO_16(d,s)
264
265 #else
266 #error unknown ACPI_MACHINE_WIDTH
267 #endif
268
269 /*
270  * Fast power-of-two math macros for non-optimized compilers
271  */
272 #define _ACPI_DIV(value,power_of2)      ((u32) ((value) >> (power_of2)))
273 #define _ACPI_MUL(value,power_of2)      ((u32) ((value) << (power_of2)))
274 #define _ACPI_MOD(value,divisor)        ((u32) ((value) & ((divisor) -1)))
275
276 #define ACPI_DIV_2(a)                   _ACPI_DIV(a,1)
277 #define ACPI_MUL_2(a)                   _ACPI_MUL(a,1)
278 #define ACPI_MOD_2(a)                   _ACPI_MOD(a,2)
279
280 #define ACPI_DIV_4(a)                   _ACPI_DIV(a,2)
281 #define ACPI_MUL_4(a)                   _ACPI_MUL(a,2)
282 #define ACPI_MOD_4(a)                   _ACPI_MOD(a,4)
283
284 #define ACPI_DIV_8(a)                   _ACPI_DIV(a,3)
285 #define ACPI_MUL_8(a)                   _ACPI_MUL(a,3)
286 #define ACPI_MOD_8(a)                   _ACPI_MOD(a,8)
287
288 #define ACPI_DIV_16(a)                  _ACPI_DIV(a,4)
289 #define ACPI_MUL_16(a)                  _ACPI_MUL(a,4)
290 #define ACPI_MOD_16(a)                  _ACPI_MOD(a,16)
291
292 #define ACPI_DIV_32(a)                  _ACPI_DIV(a,5)
293 #define ACPI_MUL_32(a)                  _ACPI_MUL(a,5)
294 #define ACPI_MOD_32(a)                  _ACPI_MOD(a,32)
295
296 /*
297  * Rounding macros (Power of two boundaries only)
298  */
299 #define ACPI_ROUND_DOWN(value, boundary)     (((acpi_size)(value)) & \
300                                                 (~(((acpi_size) boundary)-1)))
301
302 #define ACPI_ROUND_UP(value, boundary)       ((((acpi_size)(value)) + \
303                                                 (((acpi_size) boundary)-1)) & \
304                                                 (~(((acpi_size) boundary)-1)))
305
306 /* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */
307
308 #define ACPI_ROUND_DOWN_TO_32BIT(a)         ACPI_ROUND_DOWN(a,4)
309 #define ACPI_ROUND_DOWN_TO_64BIT(a)         ACPI_ROUND_DOWN(a,8)
310 #define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a)   ACPI_ROUND_DOWN(a,sizeof(acpi_size))
311
312 #define ACPI_ROUND_UP_TO_32BIT(a)           ACPI_ROUND_UP(a,4)
313 #define ACPI_ROUND_UP_TO_64BIT(a)           ACPI_ROUND_UP(a,8)
314 #define ACPI_ROUND_UP_TO_NATIVE_WORD(a)     ACPI_ROUND_UP(a,sizeof(acpi_size))
315
316 #define ACPI_ROUND_BITS_UP_TO_BYTES(a)      ACPI_DIV_8((a) + 7)
317 #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a)    ACPI_DIV_8((a))
318
319 #define ACPI_ROUND_UP_TO_1K(a)              (((a) + 1023) >> 10)
320
321 /* Generic (non-power-of-two) rounding */
322
323 #define ACPI_ROUND_UP_TO(value,boundary)    (((value) + ((boundary)-1)) / (boundary))
324
325 #define ACPI_IS_MISALIGNED(value)           (((acpi_size)value) & (sizeof(acpi_size)-1))
326
327 /*
328  * Bitmask creation
329  * Bit positions start at zero.
330  * MASK_BITS_ABOVE creates a mask starting AT the position and above
331  * MASK_BITS_BELOW creates a mask starting one bit BELOW the position
332  */
333 #define ACPI_MASK_BITS_ABOVE(position)      (~((ACPI_INTEGER_MAX) << ((u32) (position))))
334 #define ACPI_MASK_BITS_BELOW(position)      ((ACPI_INTEGER_MAX) << ((u32) (position)))
335
336 #define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
337
338 /* Bitfields within ACPI registers */
339
340 #define ACPI_REGISTER_PREPARE_BITS(val, pos, mask)      ((val << pos) & mask)
341 #define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val)  reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
342
343 #define ACPI_INSERT_BITS(target, mask, source)          target = ((target & (~(mask))) | (source & mask))
344
345 /* Generate a UUID */
346
347 #define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
348         (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
349         (b) & 0xFF, ((b) >> 8) & 0xFF, \
350         (c) & 0xFF, ((c) >> 8) & 0xFF, \
351         (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
352
353 /*
354  * An struct acpi_namespace_node * can appear in some contexts,
355  * where a pointer to an union acpi_operand_object    can also
356  * appear.  This macro is used to distinguish them.
357  *
358  * The "Descriptor" field is the first field in both structures.
359  */
360 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
361 #define ACPI_SET_DESCRIPTOR_TYPE(d,t)   (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
362
363 /* Macro to test the object type */
364
365 #define ACPI_GET_OBJECT_TYPE(d)         (((union acpi_operand_object *)(void *)(d))->common.type)
366
367 /* Macro to check the table flags for SINGLE or MULTIPLE tables are allowed */
368
369 #define ACPI_IS_SINGLE_TABLE(x)         (((x) & 0x01) == ACPI_TABLE_SINGLE ? 1 : 0)
370
371 /*
372  * Macros for the master AML opcode table
373  */
374 #if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
375 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {name,(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
376 #else
377 #define ACPI_OP(name,Pargs,Iargs,obj_type,class,type,flags)    {(u32)(Pargs),(u32)(Iargs),(u32)(flags),obj_type,class,type}
378 #endif
379
380 #ifdef ACPI_DISASSEMBLER
381 #define ACPI_DISASM_ONLY_MEMBERS(a)     a;
382 #else
383 #define ACPI_DISASM_ONLY_MEMBERS(a)
384 #endif
385
386 #define ARG_TYPE_WIDTH                  5
387 #define ARG_1(x)                        ((u32)(x))
388 #define ARG_2(x)                        ((u32)(x) << (1 * ARG_TYPE_WIDTH))
389 #define ARG_3(x)                        ((u32)(x) << (2 * ARG_TYPE_WIDTH))
390 #define ARG_4(x)                        ((u32)(x) << (3 * ARG_TYPE_WIDTH))
391 #define ARG_5(x)                        ((u32)(x) << (4 * ARG_TYPE_WIDTH))
392 #define ARG_6(x)                        ((u32)(x) << (5 * ARG_TYPE_WIDTH))
393
394 #define ARGI_LIST1(a)                   (ARG_1(a))
395 #define ARGI_LIST2(a,b)                 (ARG_1(b)|ARG_2(a))
396 #define ARGI_LIST3(a,b,c)               (ARG_1(c)|ARG_2(b)|ARG_3(a))
397 #define ARGI_LIST4(a,b,c,d)             (ARG_1(d)|ARG_2(c)|ARG_3(b)|ARG_4(a))
398 #define ARGI_LIST5(a,b,c,d,e)           (ARG_1(e)|ARG_2(d)|ARG_3(c)|ARG_4(b)|ARG_5(a))
399 #define ARGI_LIST6(a,b,c,d,e,f)         (ARG_1(f)|ARG_2(e)|ARG_3(d)|ARG_4(c)|ARG_5(b)|ARG_6(a))
400
401 #define ARGP_LIST1(a)                   (ARG_1(a))
402 #define ARGP_LIST2(a,b)                 (ARG_1(a)|ARG_2(b))
403 #define ARGP_LIST3(a,b,c)               (ARG_1(a)|ARG_2(b)|ARG_3(c))
404 #define ARGP_LIST4(a,b,c,d)             (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d))
405 #define ARGP_LIST5(a,b,c,d,e)           (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e))
406 #define ARGP_LIST6(a,b,c,d,e,f)         (ARG_1(a)|ARG_2(b)|ARG_3(c)|ARG_4(d)|ARG_5(e)|ARG_6(f))
407
408 #define GET_CURRENT_ARG_TYPE(list)      (list & ((u32) 0x1F))
409 #define INCREMENT_ARG_LIST(list)        (list >>= ((u32) ARG_TYPE_WIDTH))
410
411 #if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
412 /*
413  * Module name is include in both debug and non-debug versions primarily for
414  * error messages. The __FILE__ macro is not very useful for this, because it
415  * often includes the entire pathname to the module
416  */
417 #define ACPI_MODULE_NAME(name)          static const char ACPI_UNUSED_VAR _acpi_module_name[] = name;
418 #else
419 #define ACPI_MODULE_NAME(name)
420 #endif
421
422 /*
423  * Ascii error messages can be configured out
424  */
425 #ifndef ACPI_NO_ERROR_MESSAGES
426 #define AE_INFO                         _acpi_module_name, __LINE__
427
428 /*
429  * Error reporting. Callers module and line number are inserted by AE_INFO,
430  * the plist contains a set of parens to allow variable-length lists.
431  * These macros are used for both the debug and non-debug versions of the code.
432  */
433 #define ACPI_INFO(plist)                acpi_ut_info plist
434 #define ACPI_WARNING(plist)             acpi_ut_warning plist
435 #define ACPI_EXCEPTION(plist)           acpi_ut_exception plist
436 #define ACPI_ERROR(plist)               acpi_ut_error plist
437 #define ACPI_ERROR_NAMESPACE(s,e)       acpi_ns_report_error (AE_INFO, s, e);
438 #define ACPI_ERROR_METHOD(s,n,p,e)      acpi_ns_report_method_error (AE_INFO, s, n, p, e);
439
440 #else
441
442 /* No error messages */
443
444 #define ACPI_INFO(plist)
445 #define ACPI_WARNING(plist)
446 #define ACPI_EXCEPTION(plist)
447 #define ACPI_ERROR(plist)
448 #define ACPI_ERROR_NAMESPACE(s,e)
449 #define ACPI_ERROR_METHOD(s,n,p,e)
450 #endif
451
452 /*
453  * Debug macros that are conditionally compiled
454  */
455 #ifdef ACPI_DEBUG_OUTPUT
456
457 /*
458  * Common parameters used for debug output functions:
459  * line number, function name, module(file) name, component ID
460  */
461 #define ACPI_DEBUG_PARAMETERS           __LINE__, ACPI_GET_FUNCTION_NAME, _acpi_module_name, _COMPONENT
462
463 /*
464  * Function entry tracing
465  */
466
467 /*
468  * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header,
469  * define it now. This is the case where there the compiler does not support
470  * a __FUNCTION__ macro or equivalent.
471  */
472 #ifndef ACPI_GET_FUNCTION_NAME
473 #define ACPI_GET_FUNCTION_NAME          _acpi_function_name
474 /*
475  * The Name parameter should be the procedure name as a quoted string.
476  * The function name is also used by the function exit macros below.
477  * Note: (const char) is used to be compatible with the debug interfaces
478  * and macros such as __FUNCTION__.
479  */
480 #define ACPI_FUNCTION_NAME(name)        static const char _acpi_function_name[] = #name;
481
482 #else
483 /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
484
485 #define ACPI_FUNCTION_NAME(name)
486 #endif
487
488 #ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE
489
490 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
491                           acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
492 #define ACPI_FUNCTION_TRACE_PTR(a,b)    ACPI_FUNCTION_NAME(a) \
493                                            acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
494 #define ACPI_FUNCTION_TRACE_U32(a,b)    ACPI_FUNCTION_NAME(a) \
495                                                          acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
496 #define ACPI_FUNCTION_TRACE_STR(a,b)    ACPI_FUNCTION_NAME(a) \
497                                                                           acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
498
499 #define ACPI_FUNCTION_ENTRY()           acpi_ut_track_stack_ptr()
500
501 /*
502  * Function exit tracing.
503  * WARNING: These macros include a return statement.  This is usually considered
504  * bad form, but having a separate exit macro is very ugly and difficult to maintain.
505  * One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
506  * so that "_AcpiFunctionName" is defined.
507  *
508  * Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
509  * about these constructs.
510  */
511 #ifdef ACPI_USE_DO_WHILE_0
512 #define ACPI_DO_WHILE0(a)               do a while(0)
513 #else
514 #define ACPI_DO_WHILE0(a)               a
515 #endif
516
517 #define return_VOID                     ACPI_DO_WHILE0 ({ \
518                                                                                         acpi_ut_exit (ACPI_DEBUG_PARAMETERS); \
519                                                                                         return;})
520 /*
521  * There are two versions of most of the return macros. The default version is
522  * safer, since it avoids side-effects by guaranteeing that the argument will
523  * not be evaluated twice.
524  *
525  * A less-safe version of the macros is provided for optional use if the
526  * compiler uses excessive CPU stack (for example, this may happen in the
527  * debug case if code optimzation is disabled.)
528  */
529 #ifndef ACPI_SIMPLE_RETURN_MACROS
530
531 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
532                                                                                         register acpi_status _s = (s); \
533                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, _s); \
534                                                                                         return (_s); })
535 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
536                                                                                         register void *_s = (void *) (s); \
537                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) _s); \
538                                                                                         return (_s); })
539 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
540                                                                                         register acpi_integer _s = (s); \
541                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, _s); \
542                                                                                         return (_s); })
543 #define return_UINT8(s)                 ACPI_DO_WHILE0 ({ \
544                                                                                         register u8 _s = (u8) (s); \
545                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
546                                                                                         return (_s); })
547 #define return_UINT32(s)                ACPI_DO_WHILE0 ({ \
548                                                                                         register u32 _s = (u32) (s); \
549                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) _s); \
550                                                                                         return (_s); })
551 #else                           /* Use original less-safe macros */
552
553 #define return_ACPI_STATUS(s)           ACPI_DO_WHILE0 ({ \
554                                                                                         acpi_ut_status_exit (ACPI_DEBUG_PARAMETERS, (s)); \
555                                                                                         return((s)); })
556 #define return_PTR(s)                   ACPI_DO_WHILE0 ({ \
557                                                                                         acpi_ut_ptr_exit (ACPI_DEBUG_PARAMETERS, (u8 *) (s)); \
558                                                                                         return((s)); })
559 #define return_VALUE(s)                 ACPI_DO_WHILE0 ({ \
560                                                                                         acpi_ut_value_exit (ACPI_DEBUG_PARAMETERS, (acpi_integer) (s)); \
561                                                                                         return((s)); })
562 #define return_UINT8(s)                 return_VALUE(s)
563 #define return_UINT32(s)                return_VALUE(s)
564
565 #endif                          /* ACPI_SIMPLE_RETURN_MACROS */
566
567 #else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */
568
569 #define ACPI_FUNCTION_TRACE(a)
570 #define ACPI_FUNCTION_TRACE_PTR(a,b)
571 #define ACPI_FUNCTION_TRACE_U32(a,b)
572 #define ACPI_FUNCTION_TRACE_STR(a,b)
573 #define ACPI_FUNCTION_EXIT
574 #define ACPI_FUNCTION_STATUS_EXIT(s)
575 #define ACPI_FUNCTION_VALUE_EXIT(s)
576 #define ACPI_FUNCTION_TRACE(a)
577 #define ACPI_FUNCTION_ENTRY()
578
579 #define return_VOID                     return
580 #define return_ACPI_STATUS(s)           return(s)
581 #define return_VALUE(s)                 return(s)
582 #define return_UINT8(s)                 return(s)
583 #define return_UINT32(s)                return(s)
584 #define return_PTR(s)                   return(s)
585
586 #endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */
587
588 /* Conditional execution */
589
590 #define ACPI_DEBUG_EXEC(a)              a
591 #define ACPI_NORMAL_EXEC(a)
592
593 #define ACPI_DEBUG_DEFINE(a)            a;
594 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
595 #define _VERBOSE_STRUCTURES
596
597 /* Stack and buffer dumping */
598
599 #define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a),0)
600 #define ACPI_DUMP_OPERANDS(a,b,c)       acpi_ex_dump_operands(a,b,c)
601
602 #define ACPI_DUMP_ENTRY(a,b)            acpi_ns_dump_entry (a,b)
603 #define ACPI_DUMP_PATHNAME(a,b,c,d)     acpi_ns_dump_pathname(a,b,c,d)
604 #define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
605 #define ACPI_DUMP_BUFFER(a,b)           acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
606
607 /*
608  * Master debug print macros
609  * Print iff:
610  *    1) Debug print for the current component is enabled
611  *    2) Debug error level or trace level for the print statement is enabled
612  */
613 #define ACPI_DEBUG_PRINT(plist)         acpi_ut_debug_print plist
614 #define ACPI_DEBUG_PRINT_RAW(plist)     acpi_ut_debug_print_raw plist
615
616 #else
617 /*
618  * This is the non-debug case -- make everything go away,
619  * leaving no executable debug code!
620  */
621 #define ACPI_DEBUG_EXEC(a)
622 #define ACPI_NORMAL_EXEC(a)             a;
623
624 #define ACPI_DEBUG_DEFINE(a)            do { } while(0)
625 #define ACPI_DEBUG_ONLY_MEMBERS(a)      do { } while(0)
626 #define ACPI_FUNCTION_NAME(a)           do { } while(0)
627 #define ACPI_FUNCTION_TRACE(a)          do { } while(0)
628 #define ACPI_FUNCTION_TRACE_PTR(a,b)    do { } while(0)
629 #define ACPI_FUNCTION_TRACE_U32(a,b)    do { } while(0)
630 #define ACPI_FUNCTION_TRACE_STR(a,b)    do { } while(0)
631 #define ACPI_FUNCTION_EXIT              do { } while(0)
632 #define ACPI_FUNCTION_STATUS_EXIT(s)    do { } while(0)
633 #define ACPI_FUNCTION_VALUE_EXIT(s)     do { } while(0)
634 #define ACPI_FUNCTION_ENTRY()           do { } while(0)
635 #define ACPI_DUMP_STACK_ENTRY(a)        do { } while(0)
636 #define ACPI_DUMP_OPERANDS(a,b,c)      do { } while(0)
637 #define ACPI_DUMP_ENTRY(a,b)            do { } while(0)
638 #define ACPI_DUMP_TABLES(a,b)           do { } while(0)
639 #define ACPI_DUMP_PATHNAME(a,b,c,d)     do { } while(0)
640 #define ACPI_DUMP_RESOURCE_LIST(a)      do { } while(0)
641 #define ACPI_DUMP_BUFFER(a,b)           do { } while(0)
642 #define ACPI_DEBUG_PRINT(pl)            do { } while(0)
643 #define ACPI_DEBUG_PRINT_RAW(pl)        do { } while(0)
644
645 #define return_VOID                     return
646 #define return_ACPI_STATUS(s)           return(s)
647 #define return_VALUE(s)                 return(s)
648 #define return_UINT8(s)                 return(s)
649 #define return_UINT32(s)                return(s)
650 #define return_PTR(s)                   return(s)
651
652 #endif
653
654 /*
655  * Some code only gets executed when the debugger is built in.
656  * Note that this is entirely independent of whether the
657  * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
658  */
659 #ifdef ACPI_DEBUGGER
660 #define ACPI_DEBUGGER_EXEC(a)           a
661 #else
662 #define ACPI_DEBUGGER_EXEC(a)
663 #endif
664
665 #ifdef ACPI_DEBUG_OUTPUT
666 /*
667  * 1) Set name to blanks
668  * 2) Copy the object name
669  */
670 #define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
671                                                                                 ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
672 #else
673
674 #define ACPI_ADD_OBJECT_NAME(a,b)
675 #endif
676
677 /*
678  * Memory allocation tracking (DEBUG ONLY)
679  */
680 #ifndef ACPI_DBG_TRACK_ALLOCATIONS
681
682 /* Memory allocation */
683
684 #ifndef ACPI_ALLOCATE
685 #define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
686 #endif
687 #ifndef ACPI_ALLOCATE_ZEROED
688 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
689 #endif
690 #ifndef ACPI_FREE
691 #define ACPI_FREE(a)                acpio_os_free(a)
692 #endif
693 #define ACPI_MEM_TRACKING(a)
694
695 #else
696
697 /* Memory allocation */
698
699 #define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
700 #define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
701 #define ACPI_FREE(a)                acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
702 #define ACPI_MEM_TRACKING(a)        a
703
704 #endif                          /* ACPI_DBG_TRACK_ALLOCATIONS */
705
706 #endif                          /* ACMACROS_H */