git.oblomov.eu Git - linux-2.6/blob - drivers/char/rio/riointr.c

   1 /*
   2 ** -----------------------------------------------------------------------------
   3 **
   4 **  Perle Specialix driver for Linux
   5 **  Ported from existing RIO Driver for SCO sources.
   6  *
   7  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  *      This program is distributed in the hope that it will be useful,
  15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *      GNU General Public License for more details.
  18  *
  19  *      You should have received a copy of the GNU General Public License
  20  *      along with this program; if not, write to the Free Software
  21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 **
  23 **      Module          : riointr.c
  24 **      SID             : 1.2
  25 **      Last Modified   : 11/6/98 10:33:44
  26 **      Retrieved       : 11/6/98 10:33:49
  27 **
  28 **  ident @(#)riointr.c 1.2
  29 **
  30 ** -----------------------------------------------------------------------------
  31 */
  32 #ifdef SCCS_LABELS
  33 static char *_riointr_c_sccs_ = "@(#)riointr.c  1.2";
  34 #endif
  35
  36
  37 #include <linux/module.h>
  38 #include <linux/slab.h>
  39 #include <linux/errno.h>
  40 #include <linux/tty.h>
  41 #include <linux/tty_flip.h>
  42 #include <asm/io.h>
  43 #include <asm/system.h>
  44 #include <asm/string.h>
  45 #include <asm/uaccess.h>
  46
  47 #include <linux/termios.h>
  48 #include <linux/serial.h>
  49
  50 #include <linux/generic_serial.h>
  51
  52 #include <linux/delay.h>
  53
  54 #include "linux_compat.h"
  55 #include "rio_linux.h"
  56 #include "pkt.h"
  57 #include "daemon.h"
  58 #include "rio.h"
  59 #include "riospace.h"
  60 #include "cmdpkt.h"
  61 #include "map.h"
  62 #include "rup.h"
  63 #include "port.h"
  64 #include "riodrvr.h"
  65 #include "rioinfo.h"
  66 #include "func.h"
  67 #include "errors.h"
  68 #include "pci.h"
  69
  70 #include "parmmap.h"
  71 #include "unixrup.h"
  72 #include "board.h"
  73 #include "host.h"
  74 #include "phb.h"
  75 #include "link.h"
  76 #include "cmdblk.h"
  77 #include "route.h"
  78 #include "cirrus.h"
  79 #include "rioioctl.h"
  80
  81
  82 static void RIOReceive(struct rio_info *, struct Port *);
  83
  84
  85 static char *firstchars(char *p, int nch)
  86 {
  87         static char buf[2][128];
  88         static int t = 0;
  89         t = !t;
  90         memcpy(buf[t], p, nch);
  91         buf[t][nch] = 0;
  92         return buf[t];
  93 }
  94
  95
  96 #define INCR( P, I )    ((P) = (((P)+(I)) & p->RIOBufferMask))
  97 /* Enable and start the transmission of packets */
  98 void RIOTxEnable(char *en)
  99 {
 100         struct Port *PortP;
 101         struct rio_info *p;
 102         struct tty_struct *tty;
 103         int c;
 104         struct PKT __iomem *PacketP;
 105         unsigned long flags;
 106
 107         PortP = (struct Port *) en;
 108         p = (struct rio_info *) PortP->p;
 109         tty = PortP->gs.tty;
 110
 111
 112         rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt);
 113
 114         if (!PortP->gs.xmit_cnt)
 115                 return;
 116
 117
 118         /* This routine is an order of magnitude simpler than the specialix
 119            version. One of the disadvantages is that this version will send
 120            an incomplete packet (usually 64 bytes instead of 72) once for
 121            every 4k worth of data. Let's just say that this won't influence
 122            performance significantly..... */
 123
 124         rio_spin_lock_irqsave(&PortP->portSem, flags);
 125
 126         while (can_add_transmit(&PacketP, PortP)) {
 127                 c = PortP->gs.xmit_cnt;
 128                 if (c > PKT_MAX_DATA_LEN)
 129                         c = PKT_MAX_DATA_LEN;
 130
 131                 /* Don't copy past the end of the source buffer */
 132                 if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail)
 133                         c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail;
 134
 135                 {
 136                         int t;
 137                         t = (c > 10) ? 10 : c;
 138
 139                         rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t));
 140                 }
 141                 /* If for one reason or another, we can't copy more data,
 142                    we're done! */
 143                 if (c == 0)
 144                         break;
 145
 146                 rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
 147                 /*    udelay (1); */
 148
 149                 writeb(c, &(PacketP->len));
 150                 if (!(PortP->State & RIO_DELETED)) {
 151                         add_transmit(PortP);
 152                         /*
 153                          ** Count chars tx'd for port statistics reporting
 154                          */
 155                         if (PortP->statsGather)
 156                                 PortP->txchars += c;
 157                 }
 158                 PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1);
 159                 PortP->gs.xmit_cnt -= c;
 160         }
 161
 162         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 163
 164         if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN))
 165                 tty_wakeup(PortP->gs.tty);
 166
 167 }
 168
 169
 170 /*
 171 ** RIO Host Service routine. Does all the work traditionally associated with an
 172 ** interrupt.
 173 */
 174 static int RupIntr;
 175 static int RxIntr;
 176 static int TxIntr;
 177
 178 void RIOServiceHost(struct rio_info *p, struct Host *HostP)
 179 {
 180         rio_spin_lock(&HostP->HostLock);
 181         if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
 182                 static int t = 0;
 183                 rio_spin_unlock(&HostP->HostLock);
 184                 if ((t++ % 200) == 0)
 185                         rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags);
 186                 return;
 187         }
 188         rio_spin_unlock(&HostP->HostLock);
 189
 190         if (readw(&HostP->ParmMapP->rup_intr)) {
 191                 writew(0, &HostP->ParmMapP->rup_intr);
 192                 p->RIORupCount++;
 193                 RupIntr++;
 194                 rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %Zd\n", HostP - p->RIOHosts);
 195                 RIOPollHostCommands(p, HostP);
 196         }
 197
 198         if (readw(&HostP->ParmMapP->rx_intr)) {
 199                 int port;
 200
 201                 writew(0, &HostP->ParmMapP->rx_intr);
 202                 p->RIORxCount++;
 203                 RxIntr++;
 204
 205                 rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %Zd\n", HostP - p->RIOHosts);
 206                 /*
 207                  ** Loop through every port. If the port is mapped into
 208                  ** the system ( i.e. has /dev/ttyXXXX associated ) then it is
 209                  ** worth checking. If the port isn't open, grab any packets
 210                  ** hanging on its receive queue and stuff them on the free
 211                  ** list; check for commands on the way.
 212                  */
 213                 for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
 214                         struct Port *PortP = p->RIOPortp[port];
 215                         struct tty_struct *ttyP;
 216                         struct PKT __iomem *PacketP;
 217
 218                         /*
 219                          ** not mapped in - most of the RIOPortp[] information
 220                          ** has not been set up!
 221                          ** Optimise: ports come in bundles of eight.
 222                          */
 223                         if (!PortP->Mapped) {
 224                                 port += 7;
 225                                 continue;       /* with the next port */
 226                         }
 227
 228                         /*
 229                          ** If the host board isn't THIS host board, check the next one.
 230                          ** optimise: ports come in bundles of eight.
 231                          */
 232                         if (PortP->HostP != HostP) {
 233                                 port += 7;
 234                                 continue;
 235                         }
 236
 237                         /*
 238                          ** Let us see - is the port open? If not, then don't service it.
 239                          */
 240                         if (!(PortP->PortState & PORT_ISOPEN)) {
 241                                 continue;
 242                         }
 243
 244                         /*
 245                          ** find corresponding tty structure. The process of mapping
 246                          ** the ports puts these here.
 247                          */
 248                         ttyP = PortP->gs.tty;
 249
 250                         /*
 251                          ** Lock the port before we begin working on it.
 252                          */
 253                         rio_spin_lock(&PortP->portSem);
 254
 255                         /*
 256                          ** Process received data if there is any.
 257                          */
 258                         if (can_remove_receive(&PacketP, PortP))
 259                                 RIOReceive(p, PortP);
 260
 261                         /*
 262                          ** If there is no data left to be read from the port, and
 263                          ** it's handshake bit is set, then we must clear the handshake,
 264                          ** so that that downstream RTA is re-enabled.
 265                          */
 266                         if (!can_remove_receive(&PacketP, PortP) && (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) {
 267                                 /*
 268                                  ** MAGIC! ( Basically, handshake the RX buffer, so that
 269                                  ** the RTAs upstream can be re-enabled. )
 270                                  */
 271                                 rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n");
 272                                 writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake);
 273                         }
 274                         rio_spin_unlock(&PortP->portSem);
 275                 }
 276         }
 277
 278         if (readw(&HostP->ParmMapP->tx_intr)) {
 279                 int port;
 280
 281                 writew(0, &HostP->ParmMapP->tx_intr);
 282
 283                 p->RIOTxCount++;
 284                 TxIntr++;
 285                 rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %Zd\n", HostP - p->RIOHosts);
 286
 287                 /*
 288                  ** Loop through every port.
 289                  ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX
 290                  ** associated ) then it is worth checking.
 291                  */
 292                 for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
 293                         struct Port *PortP = p->RIOPortp[port];
 294                         struct tty_struct *ttyP;
 295                         struct PKT __iomem *PacketP;
 296
 297                         /*
 298                          ** not mapped in - most of the RIOPortp[] information
 299                          ** has not been set up!
 300                          */
 301                         if (!PortP->Mapped) {
 302                                 port += 7;
 303                                 continue;       /* with the next port */
 304                         }
 305
 306                         /*
 307                          ** If the host board isn't running, then its data structures
 308                          ** are no use to us - continue quietly.
 309                          */
 310                         if (PortP->HostP != HostP) {
 311                                 port += 7;
 312                                 continue;       /* with the next port */
 313                         }
 314
 315                         /*
 316                          ** Let us see - is the port open? If not, then don't service it.
 317                          */
 318                         if (!(PortP->PortState & PORT_ISOPEN)) {
 319                                 continue;
 320                         }
 321
 322                         rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port);
 323                         /*
 324                          ** Lock the port before we begin working on it.
 325                          */
 326                         rio_spin_lock(&PortP->portSem);
 327
 328                         /*
 329                          ** If we can't add anything to the transmit queue, then
 330                          ** we need do none of this processing.
 331                          */
 332                         if (!can_add_transmit(&PacketP, PortP)) {
 333                                 rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n");
 334                                 rio_spin_unlock(&PortP->portSem);
 335                                 continue;
 336                         }
 337
 338                         /*
 339                          ** find corresponding tty structure. The process of mapping
 340                          ** the ports puts these here.
 341                          */
 342                         ttyP = PortP->gs.tty;
 343                         /* If ttyP is NULL, the port is getting closed. Forget about it. */
 344                         if (!ttyP) {
 345                                 rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n");
 346                                 rio_spin_unlock(&PortP->portSem);
 347                                 continue;
 348                         }
 349                         /*
 350                          ** If there is more room available we start up the transmit
 351                          ** data process again. This can be direct I/O, if the cookmode
 352                          ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the
 353                          ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch
 354                          ** characters via the line discipline. We must always call
 355                          ** the line discipline,
 356                          ** so that user input characters can be echoed correctly.
 357                          **
 358                          ** ++++ Update +++++
 359                          ** With the advent of double buffering, we now see if
 360                          ** TxBufferOut-In is non-zero. If so, then we copy a packet
 361                          ** to the output place, and set it going. If this empties
 362                          ** the buffer, then we must issue a wakeup( ) on OUT.
 363                          ** If it frees space in the buffer then we must issue
 364                          ** a wakeup( ) on IN.
 365                          **
 366                          ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we
 367                          ** have to send a WFLUSH command down the PHB, to mark the
 368                          ** end point of a WFLUSH. We also need to clear out any
 369                          ** data from the double buffer! ( note that WflushFlag is a
 370                          ** *count* of the number of WFLUSH commands outstanding! )
 371                          **
 372                          ** ++++ And there's more!
 373                          ** If an RTA is powered off, then on again, and rebooted,
 374                          ** whilst it has ports open, then we need to re-open the ports.
 375                          ** ( reasonable enough ). We can't do this when we spot the
 376                          ** re-boot, in interrupt time, because the queue is probably
 377                          ** full. So, when we come in here, we need to test if any
 378                          ** ports are in this condition, and re-open the port before
 379                          ** we try to send any more data to it. Now, the re-booted
 380                          ** RTA will be discarding packets from the PHB until it
 381                          ** receives this open packet, but don't worry tooo much
 382                          ** about that. The one thing that is interesting is the
 383                          ** combination of this effect and the WFLUSH effect!
 384                          */
 385                         /* For now don't handle RTA reboots. -- REW.
 386                            Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
 387                         if (PortP->MagicFlags) {
 388                                 if (PortP->MagicFlags & MAGIC_REBOOT) {
 389                                         /*
 390                                          ** well, the RTA has been rebooted, and there is room
 391                                          ** on its queue to add the open packet that is required.
 392                                          **
 393                                          ** The messy part of this line is trying to decide if
 394                                          ** we need to call the Param function as a tty or as
 395                                          ** a modem.
 396                                          ** DONT USE CLOCAL AS A TEST FOR THIS!
 397                                          **
 398                                          ** If we can't param the port, then move on to the
 399                                          ** next port.
 400                                          */
 401                                         PortP->InUse = NOT_INUSE;
 402
 403                                         rio_spin_unlock(&PortP->portSem);
 404                                         if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL)
 405                                                 continue;       /* with next port */
 406                                         rio_spin_lock(&PortP->portSem);
 407                                         PortP->MagicFlags &= ~MAGIC_REBOOT;
 408                                 }
 409
 410                                 /*
 411                                  ** As mentioned above, this is a tacky hack to cope
 412                                  ** with WFLUSH
 413                                  */
 414                                 if (PortP->WflushFlag) {
 415                                         rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n");
 416
 417                                         if (PortP->InUse)
 418                                                 rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n");
 419                                 }
 420
 421                                 while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) {
 422                                         int p;
 423                                         struct PktCmd __iomem *PktCmdP;
 424
 425                                         rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
 426                                         /*
 427                                          ** make it look just like a WFLUSH command
 428                                          */
 429                                         PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0];
 430
 431                                         writeb(RIOC_WFLUSH, &PktCmdP->Command);
 432
 433                                         p = PortP->HostPort % (u16) PORTS_PER_RTA;
 434
 435                                         /*
 436                                          ** If second block of ports for 16 port RTA, add 8
 437                                          ** to index 8-15.
 438                                          */
 439                                         if (PortP->SecondBlock)
 440                                                 p += PORTS_PER_RTA;
 441
 442                                         writeb(p, &PktCmdP->PhbNum);
 443
 444                                         /*
 445                                          ** to make debuggery easier
 446                                          */
 447                                         writeb('W', &PacketP->data[2]);
 448                                         writeb('F', &PacketP->data[3]);
 449                                         writeb('L', &PacketP->data[4]);
 450                                         writeb('U', &PacketP->data[5]);
 451                                         writeb('S', &PacketP->data[6]);
 452                                         writeb('H', &PacketP->data[7]);
 453                                         writeb(' ', &PacketP->data[8]);
 454                                         writeb('0' + PortP->WflushFlag, &PacketP->data[9]);
 455                                         writeb(' ', &PacketP->data[10]);
 456                                         writeb(' ', &PacketP->data[11]);
 457                                         writeb('\0', &PacketP->data[12]);
 458
 459                                         /*
 460                                          ** its two bytes long!
 461                                          */
 462                                         writeb(PKT_CMD_BIT | 2, &PacketP->len);
 463
 464                                         /*
 465                                          ** queue it!
 466                                          */
 467                                         if (!(PortP->State & RIO_DELETED)) {
 468                                                 add_transmit(PortP);
 469                                                 /*
 470                                                  ** Count chars tx'd for port statistics reporting
 471                                                  */
 472                                                 if (PortP->statsGather)
 473                                                         PortP->txchars += 2;
 474                                         }
 475
 476                                         if (--(PortP->WflushFlag) == 0) {
 477                                                 PortP->MagicFlags &= ~MAGIC_FLUSH;
 478                                         }
 479
 480                                         rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag);
 481                                 }
 482                                 if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) {
 483                                         if (PortP->MagicFlags & MAGIC_FLUSH) {
 484                                                 PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
 485                                         } else {
 486                                                 if (!can_add_transmit(&PacketP, PortP)) {
 487                                                         rio_spin_unlock(&PortP->portSem);
 488                                                         continue;
 489                                                 }
 490                                                 rio_spin_unlock(&PortP->portSem);
 491                                                 RIOTxEnable((char *) PortP);
 492                                                 rio_spin_lock(&PortP->portSem);
 493                                                 PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
 494                                         }
 495                                 }
 496                         }
 497
 498
 499                         /*
 500                          ** If we can't add anything to the transmit queue, then
 501                          ** we need do none of the remaining processing.
 502                          */
 503                         if (!can_add_transmit(&PacketP, PortP)) {
 504                                 rio_spin_unlock(&PortP->portSem);
 505                                 continue;
 506                         }
 507
 508                         rio_spin_unlock(&PortP->portSem);
 509                         RIOTxEnable((char *) PortP);
 510                 }
 511         }
 512 }
 513
 514 /*
 515 ** Routine for handling received data for tty drivers
 516 */
 517 static void RIOReceive(struct rio_info *p, struct Port *PortP)
 518 {
 519         struct tty_struct *TtyP;
 520         unsigned short transCount;
 521         struct PKT __iomem *PacketP;
 522         register unsigned int DataCnt;
 523         unsigned char __iomem *ptr;
 524         unsigned char *buf;
 525         int copied = 0;
 526
 527         static int intCount, RxIntCnt;
 528
 529         /*
 530          ** The receive data process is to remove packets from the
 531          ** PHB until there aren't any more or the current cblock
 532          ** is full. When this occurs, there will be some left over
 533          ** data in the packet, that we must do something with.
 534          ** As we haven't unhooked the packet from the read list
 535          ** yet, we can just leave the packet there, having first
 536          ** made a note of how far we got. This means that we need
 537          ** a pointer per port saying where we start taking the
 538          ** data from - this will normally be zero, but when we
 539          ** run out of space it will be set to the offset of the
 540          ** next byte to copy from the packet data area. The packet
 541          ** length field is decremented by the number of bytes that
 542          ** we successfully removed from the packet. When this reaches
 543          ** zero, we reset the offset pointer to be zero, and free
 544          ** the packet from the front of the queue.
 545          */
 546
 547         intCount++;
 548
 549         TtyP = PortP->gs.tty;
 550         if (!TtyP) {
 551                 rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
 552                 return;
 553         }
 554
 555         if (PortP->State & RIO_THROTTLE_RX) {
 556                 rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n");
 557                 return;
 558         }
 559
 560         if (PortP->State & RIO_DELETED) {
 561                 while (can_remove_receive(&PacketP, PortP)) {
 562                         remove_receive(PortP);
 563                         put_free_end(PortP->HostP, PacketP);
 564                 }
 565         } else {
 566                 /*
 567                  ** loop, just so long as:
 568                  **   i ) there's some data ( i.e. can_remove_receive )
 569                  **  ii ) we haven't been blocked
 570                  ** iii ) there's somewhere to put the data
 571                  **  iv ) we haven't outstayed our welcome
 572                  */
 573                 transCount = 1;
 574                 while (can_remove_receive(&PacketP, PortP)
 575                        && transCount) {
 576                         RxIntCnt++;
 577
 578                         /*
 579                          ** check that it is not a command!
 580                          */
 581                         if (readb(&PacketP->len) & PKT_CMD_BIT) {
 582                                 rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
 583                                 /*      rio_dprint(RIO_DEBUG_INTR, (" sysport   = %d\n", p->RIOPortp->PortNum)); */
 584                                 rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit));
 585                                 rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port));
 586                                 rio_dprintk(RIO_DEBUG_INTR, " src_unit  = %d\n", readb(&PacketP->src_unit));
 587                                 rio_dprintk(RIO_DEBUG_INTR, " src_port  = %d\n", readb(&PacketP->src_port));
 588                                 rio_dprintk(RIO_DEBUG_INTR, " len          = %d\n", readb(&PacketP->len));
 589                                 rio_dprintk(RIO_DEBUG_INTR, " control   = %d\n", readb(&PacketP->control));
 590                                 rio_dprintk(RIO_DEBUG_INTR, " csum         = %d\n", readw(&PacketP->csum));
 591                                 rio_dprintk(RIO_DEBUG_INTR, "    data bytes: ");
 592                                 for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++)
 593                                         rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt]));
 594                                 remove_receive(PortP);
 595                                 put_free_end(PortP->HostP, PacketP);
 596                                 continue;       /* with next packet */
 597                         }
 598
 599                         /*
 600                          ** How many characters can we move 'upstream' ?
 601                          **
 602                          ** Determine the minimum of the amount of data
 603                          ** available and the amount of space in which to
 604                          ** put it.
 605                          **
 606                          ** 1.        Get the packet length by masking 'len'
 607                          **   for only the length bits.
 608                          ** 2.        Available space is [buffer size] - [space used]
 609                          **
 610                          ** Transfer count is the minimum of packet length
 611                          ** and available space.
 612                          */
 613
 614                         transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK);
 615                         rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount);
 616                         /*
 617                          ** To use the following 'kkprintfs' for debugging - change the '#undef'
 618                          ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
 619                          ** driver).
 620                          */
 621                         ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart;
 622
 623                         tty_prepare_flip_string(TtyP, &buf, transCount);
 624                         rio_memcpy_fromio(buf, ptr, transCount);
 625                         PortP->RxDataStart += transCount;
 626                         writeb(readb(&PacketP->len)-transCount, &PacketP->len);
 627                         copied += transCount;
 628
 629
 630
 631                         if (readb(&PacketP->len) == 0) {
 632                                 /*
 633                                  ** If we have emptied the packet, then we can
 634                                  ** free it, and reset the start pointer for
 635                                  ** the next packet.
 636                                  */
 637                                 remove_receive(PortP);
 638                                 put_free_end(PortP->HostP, PacketP);
 639                                 PortP->RxDataStart = 0;
 640                         }
 641                 }
 642         }
 643         if (copied) {
 644                 rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied);
 645                 tty_flip_buffer_push(TtyP);
 646         }
 647
 648         return;
 649 }
 650