Staging: serqt_usb: Lindent the code

[linux-2.6] / drivers / spi / pxa2xx_spi.c

/*
 * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/clk.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>

#include <mach/dma.h>
#include <mach/regs-ssp.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>

MODULE_AUTHOR("Stephen Street");
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pxa2xx-spi");

#define MAX_BUSES 3

#define RX_THRESH_DFLT  8
#define TX_THRESH_DFLT  8
#define TIMOUT_DFLT             1000

#define DMA_INT_MASK            (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
#define RESET_DMA_CHANNEL       (DCSR_NODESC | DMA_INT_MASK)
#define IS_DMA_ALIGNED(x)       ((((u32)(x)) & 0x07) == 0)
#define MAX_DMA_LEN             8191

/*
 * for testing SSCR1 changes that require SSP restart, basically
 * everything except the service and interrupt enables, the pxa270 developer
 * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this
 * list, but the PXA255 dev man says all bits without really meaning the
 * service and interrupt enables
 */
#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \
                                | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \
                                | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \
                                | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \
                                | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \
                                | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)

#define DEFINE_SSP_REG(reg, off) \
static inline u32 read_##reg(void const __iomem *p) \
{ return __raw_readl(p + (off)); } \
\
static inline void write_##reg(u32 v, void __iomem *p) \
{ __raw_writel(v, p + (off)); }

DEFINE_SSP_REG(SSCR0, 0x00)
DEFINE_SSP_REG(SSCR1, 0x04)
DEFINE_SSP_REG(SSSR, 0x08)
DEFINE_SSP_REG(SSITR, 0x0c)
DEFINE_SSP_REG(SSDR, 0x10)
DEFINE_SSP_REG(SSTO, 0x28)
DEFINE_SSP_REG(SSPSP, 0x2c)

#define START_STATE ((void*)0)
#define RUNNING_STATE ((void*)1)
#define DONE_STATE ((void*)2)
#define ERROR_STATE ((void*)-1)

#define QUEUE_RUNNING 0
#define QUEUE_STOPPED 1

struct driver_data {
        /* Driver model hookup */
        struct platform_device *pdev;

        /* SSP Info */
        struct ssp_device *ssp;

        /* SPI framework hookup */
        enum pxa_ssp_type ssp_type;
        struct spi_master *master;

        /* PXA hookup */
        struct pxa2xx_spi_master *master_info;

        /* DMA setup stuff */
        int rx_channel;
        int tx_channel;
        u32 *null_dma_buf;

        /* SSP register addresses */
        void __iomem *ioaddr;
        u32 ssdr_physical;

        /* SSP masks*/
        u32 dma_cr1;
        u32 int_cr1;
        u32 clear_sr;
        u32 mask_sr;

        /* Driver message queue */
        struct workqueue_struct *workqueue;
        struct work_struct pump_messages;
        spinlock_t lock;
        struct list_head queue;
        int busy;
        int run;

        /* Message Transfer pump */
        struct tasklet_struct pump_transfers;

        /* Current message transfer state info */
        struct spi_message* cur_msg;
        struct spi_transfer* cur_transfer;
        struct chip_data *cur_chip;
        size_t len;
        void *tx;
        void *tx_end;
        void *rx;
        void *rx_end;
        int dma_mapped;
        dma_addr_t rx_dma;
        dma_addr_t tx_dma;
        size_t rx_map_len;
        size_t tx_map_len;
        u8 n_bytes;
        u32 dma_width;
        int (*write)(struct driver_data *drv_data);
        int (*read)(struct driver_data *drv_data);
        irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
        void (*cs_control)(u32 command);
};

struct chip_data {
        u32 cr0;
        u32 cr1;
        u32 psp;
        u32 timeout;
        u8 n_bytes;
        u32 dma_width;
        u32 dma_burst_size;
        u32 threshold;
        u32 dma_threshold;
        u8 enable_dma;
        u8 bits_per_word;
        u32 speed_hz;
        int (*write)(struct driver_data *drv_data);
        int (*read)(struct driver_data *drv_data);
        void (*cs_control)(u32 command);
};

static void pump_messages(struct work_struct *work);

static int flush(struct driver_data *drv_data)
{
        unsigned long limit = loops_per_jiffy << 1;

        void __iomem *reg = drv_data->ioaddr;

        do {
                while (read_SSSR(reg) & SSSR_RNE) {
                        read_SSDR(reg);
                }
        } while ((read_SSSR(reg) & SSSR_BSY) && limit--);
        write_SSSR(SSSR_ROR, reg);

        return limit;
}

static void null_cs_control(u32 command)
{
}

static int null_writer(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;
        u8 n_bytes = drv_data->n_bytes;

        if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
                || (drv_data->tx == drv_data->tx_end))
                return 0;

        write_SSDR(0, reg);
        drv_data->tx += n_bytes;

        return 1;
}

static int null_reader(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;
        u8 n_bytes = drv_data->n_bytes;

        while ((read_SSSR(reg) & SSSR_RNE)
                && (drv_data->rx < drv_data->rx_end)) {
                read_SSDR(reg);
                drv_data->rx += n_bytes;
        }

        return drv_data->rx == drv_data->rx_end;
}

static int u8_writer(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
                || (drv_data->tx == drv_data->tx_end))
                return 0;

        write_SSDR(*(u8 *)(drv_data->tx), reg);
        ++drv_data->tx;

        return 1;
}

static int u8_reader(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        while ((read_SSSR(reg) & SSSR_RNE)
                && (drv_data->rx < drv_data->rx_end)) {
                *(u8 *)(drv_data->rx) = read_SSDR(reg);
                ++drv_data->rx;
        }

        return drv_data->rx == drv_data->rx_end;
}

static int u16_writer(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
                || (drv_data->tx == drv_data->tx_end))
                return 0;

        write_SSDR(*(u16 *)(drv_data->tx), reg);
        drv_data->tx += 2;

        return 1;
}

static int u16_reader(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        while ((read_SSSR(reg) & SSSR_RNE)
                && (drv_data->rx < drv_data->rx_end)) {
                *(u16 *)(drv_data->rx) = read_SSDR(reg);
                drv_data->rx += 2;
        }

        return drv_data->rx == drv_data->rx_end;
}

static int u32_writer(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
                || (drv_data->tx == drv_data->tx_end))
                return 0;

        write_SSDR(*(u32 *)(drv_data->tx), reg);
        drv_data->tx += 4;

        return 1;
}

static int u32_reader(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        while ((read_SSSR(reg) & SSSR_RNE)
                && (drv_data->rx < drv_data->rx_end)) {
                *(u32 *)(drv_data->rx) = read_SSDR(reg);
                drv_data->rx += 4;
        }

        return drv_data->rx == drv_data->rx_end;
}

static void *next_transfer(struct driver_data *drv_data)
{
        struct spi_message *msg = drv_data->cur_msg;
        struct spi_transfer *trans = drv_data->cur_transfer;

        /* Move to next transfer */
        if (trans->transfer_list.next != &msg->transfers) {
                drv_data->cur_transfer =
                        list_entry(trans->transfer_list.next,
                                        struct spi_transfer,
                                        transfer_list);
                return RUNNING_STATE;
        } else
                return DONE_STATE;
}

static int map_dma_buffers(struct driver_data *drv_data)
{
        struct spi_message *msg = drv_data->cur_msg;
        struct device *dev = &msg->spi->dev;

        if (!drv_data->cur_chip->enable_dma)
                return 0;

        if (msg->is_dma_mapped)
                return  drv_data->rx_dma && drv_data->tx_dma;

        if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
                return 0;

        /* Modify setup if rx buffer is null */
        if (drv_data->rx == NULL) {
                *drv_data->null_dma_buf = 0;
                drv_data->rx = drv_data->null_dma_buf;
                drv_data->rx_map_len = 4;
        } else
                drv_data->rx_map_len = drv_data->len;


        /* Modify setup if tx buffer is null */
        if (drv_data->tx == NULL) {
                *drv_data->null_dma_buf = 0;
                drv_data->tx = drv_data->null_dma_buf;
                drv_data->tx_map_len = 4;
        } else
                drv_data->tx_map_len = drv_data->len;

        /* Stream map the tx buffer. Always do DMA_TO_DEVICE first
         * so we flush the cache *before* invalidating it, in case
         * the tx and rx buffers overlap.
         */
        drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
                                        drv_data->tx_map_len, DMA_TO_DEVICE);
        if (dma_mapping_error(dev, drv_data->tx_dma))
                return 0;

        /* Stream map the rx buffer */
        drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
                                        drv_data->rx_map_len, DMA_FROM_DEVICE);
        if (dma_mapping_error(dev, drv_data->rx_dma)) {
                dma_unmap_single(dev, drv_data->tx_dma,
                                        drv_data->tx_map_len, DMA_TO_DEVICE);
                return 0;
        }

        return 1;
}

static void unmap_dma_buffers(struct driver_data *drv_data)
{
        struct device *dev;

        if (!drv_data->dma_mapped)
                return;

        if (!drv_data->cur_msg->is_dma_mapped) {
                dev = &drv_data->cur_msg->spi->dev;
                dma_unmap_single(dev, drv_data->rx_dma,
                                        drv_data->rx_map_len, DMA_FROM_DEVICE);
                dma_unmap_single(dev, drv_data->tx_dma,
                                        drv_data->tx_map_len, DMA_TO_DEVICE);
        }

        drv_data->dma_mapped = 0;
}

/* caller already set message->status; dma and pio irqs are blocked */
static void giveback(struct driver_data *drv_data)
{
        struct spi_transfer* last_transfer;
        unsigned long flags;
        struct spi_message *msg;

        spin_lock_irqsave(&drv_data->lock, flags);
        msg = drv_data->cur_msg;
        drv_data->cur_msg = NULL;
        drv_data->cur_transfer = NULL;
        drv_data->cur_chip = NULL;
        queue_work(drv_data->workqueue, &drv_data->pump_messages);
        spin_unlock_irqrestore(&drv_data->lock, flags);

        last_transfer = list_entry(msg->transfers.prev,
                                        struct spi_transfer,
                                        transfer_list);

        /* Delay if requested before any change in chip select */
        if (last_transfer->delay_usecs)
                udelay(last_transfer->delay_usecs);

        /* Drop chip select UNLESS cs_change is true or we are returning
         * a message with an error, or next message is for another chip
         */
        if (!last_transfer->cs_change)
                drv_data->cs_control(PXA2XX_CS_DEASSERT);
        else {
                struct spi_message *next_msg;

                /* Holding of cs was hinted, but we need to make sure
                 * the next message is for the same chip.  Don't waste
                 * time with the following tests unless this was hinted.
                 *
                 * We cannot postpone this until pump_messages, because
                 * after calling msg->complete (below) the driver that
                 * sent the current message could be unloaded, which
                 * could invalidate the cs_control() callback...
                 */

                /* get a pointer to the next message, if any */
                spin_lock_irqsave(&drv_data->lock, flags);
                if (list_empty(&drv_data->queue))
                        next_msg = NULL;
                else
                        next_msg = list_entry(drv_data->queue.next,
                                        struct spi_message, queue);
                spin_unlock_irqrestore(&drv_data->lock, flags);

                /* see if the next and current messages point
                 * to the same chip
                 */
                if (next_msg && next_msg->spi != msg->spi)
                        next_msg = NULL;
                if (!next_msg || msg->state == ERROR_STATE)
                        drv_data->cs_control(PXA2XX_CS_DEASSERT);
        }

        msg->state = NULL;
        if (msg->complete)
                msg->complete(msg->context);
}

static int wait_ssp_rx_stall(void const __iomem *ioaddr)
{
        unsigned long limit = loops_per_jiffy << 1;

        while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
                cpu_relax();

        return limit;
}

static int wait_dma_channel_stop(int channel)
{
        unsigned long limit = loops_per_jiffy << 1;

        while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
                cpu_relax();

        return limit;
}

static void dma_error_stop(struct driver_data *drv_data, const char *msg)
{
        void __iomem *reg = drv_data->ioaddr;

        /* Stop and reset */
        DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
        DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
        write_SSSR(drv_data->clear_sr, reg);
        write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
        if (drv_data->ssp_type != PXA25x_SSP)
                write_SSTO(0, reg);
        flush(drv_data);
        write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);

        unmap_dma_buffers(drv_data);

        dev_err(&drv_data->pdev->dev, "%s\n", msg);

        drv_data->cur_msg->state = ERROR_STATE;
        tasklet_schedule(&drv_data->pump_transfers);
}

static void dma_transfer_complete(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;
        struct spi_message *msg = drv_data->cur_msg;

        /* Clear and disable interrupts on SSP and DMA channels*/
        write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
        write_SSSR(drv_data->clear_sr, reg);
        DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
        DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;

        if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
                dev_err(&drv_data->pdev->dev,
                        "dma_handler: dma rx channel stop failed\n");

        if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
                dev_err(&drv_data->pdev->dev,
                        "dma_transfer: ssp rx stall failed\n");

        unmap_dma_buffers(drv_data);

        /* update the buffer pointer for the amount completed in dma */
        drv_data->rx += drv_data->len -
                        (DCMD(drv_data->rx_channel) & DCMD_LENGTH);

        /* read trailing data from fifo, it does not matter how many
         * bytes are in the fifo just read until buffer is full
         * or fifo is empty, which ever occurs first */
        drv_data->read(drv_data);

        /* return count of what was actually read */
        msg->actual_length += drv_data->len -
                                (drv_data->rx_end - drv_data->rx);

        /* Transfer delays and chip select release are
         * handled in pump_transfers or giveback
         */

        /* Move to next transfer */
        msg->state = next_transfer(drv_data);

        /* Schedule transfer tasklet */
        tasklet_schedule(&drv_data->pump_transfers);
}

static void dma_handler(int channel, void *data)
{
        struct driver_data *drv_data = data;
        u32 irq_status = DCSR(channel) & DMA_INT_MASK;

        if (irq_status & DCSR_BUSERR) {

                if (channel == drv_data->tx_channel)
                        dma_error_stop(drv_data,
                                        "dma_handler: "
                                        "bad bus address on tx channel");
                else
                        dma_error_stop(drv_data,
                                        "dma_handler: "
                                        "bad bus address on rx channel");
                return;
        }

        /* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
        if ((channel == drv_data->tx_channel)
                && (irq_status & DCSR_ENDINTR)
                && (drv_data->ssp_type == PXA25x_SSP)) {

                /* Wait for rx to stall */
                if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
                        dev_err(&drv_data->pdev->dev,
                                "dma_handler: ssp rx stall failed\n");

                /* finish this transfer, start the next */
                dma_transfer_complete(drv_data);
        }
}

static irqreturn_t dma_transfer(struct driver_data *drv_data)
{
        u32 irq_status;
        void __iomem *reg = drv_data->ioaddr;

        irq_status = read_SSSR(reg) & drv_data->mask_sr;
        if (irq_status & SSSR_ROR) {
                dma_error_stop(drv_data, "dma_transfer: fifo overrun");
                return IRQ_HANDLED;
        }

        /* Check for false positive timeout */
        if ((irq_status & SSSR_TINT)
                && (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
                write_SSSR(SSSR_TINT, reg);
                return IRQ_HANDLED;
        }

        if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {

                /* Clear and disable timeout interrupt, do the rest in
                 * dma_transfer_complete */
                if (drv_data->ssp_type != PXA25x_SSP)
                        write_SSTO(0, reg);

                /* finish this transfer, start the next */
                dma_transfer_complete(drv_data);

                return IRQ_HANDLED;
        }

        /* Opps problem detected */
        return IRQ_NONE;
}

static void int_error_stop(struct driver_data *drv_data, const char* msg)
{
        void __iomem *reg = drv_data->ioaddr;

        /* Stop and reset SSP */
        write_SSSR(drv_data->clear_sr, reg);
        write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
        if (drv_data->ssp_type != PXA25x_SSP)
                write_SSTO(0, reg);
        flush(drv_data);
        write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);

        dev_err(&drv_data->pdev->dev, "%s\n", msg);

        drv_data->cur_msg->state = ERROR_STATE;
        tasklet_schedule(&drv_data->pump_transfers);
}

static void int_transfer_complete(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        /* Stop SSP */
        write_SSSR(drv_data->clear_sr, reg);
        write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
        if (drv_data->ssp_type != PXA25x_SSP)
                write_SSTO(0, reg);

        /* Update total byte transfered return count actual bytes read */
        drv_data->cur_msg->actual_length += drv_data->len -
                                (drv_data->rx_end - drv_data->rx);

        /* Transfer delays and chip select release are
         * handled in pump_transfers or giveback
         */

        /* Move to next transfer */
        drv_data->cur_msg->state = next_transfer(drv_data);

        /* Schedule transfer tasklet */
        tasklet_schedule(&drv_data->pump_transfers);
}

static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
{
        void __iomem *reg = drv_data->ioaddr;

        u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
                        drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;

        u32 irq_status = read_SSSR(reg) & irq_mask;

        if (irq_status & SSSR_ROR) {
                int_error_stop(drv_data, "interrupt_transfer: fifo overrun");
                return IRQ_HANDLED;
        }

        if (irq_status & SSSR_TINT) {
                write_SSSR(SSSR_TINT, reg);
                if (drv_data->read(drv_data)) {
                        int_transfer_complete(drv_data);
                        return IRQ_HANDLED;
                }
        }

        /* Drain rx fifo, Fill tx fifo and prevent overruns */
        do {
                if (drv_data->read(drv_data)) {
                        int_transfer_complete(drv_data);
                        return IRQ_HANDLED;
                }
        } while (drv_data->write(drv_data));

        if (drv_data->read(drv_data)) {
                int_transfer_complete(drv_data);
                return IRQ_HANDLED;
        }

        if (drv_data->tx == drv_data->tx_end) {
                write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
                /* PXA25x_SSP has no timeout, read trailing bytes */
                if (drv_data->ssp_type == PXA25x_SSP) {
                        if (!wait_ssp_rx_stall(reg))
                        {
                                int_error_stop(drv_data, "interrupt_transfer: "
                                                "rx stall failed");
                                return IRQ_HANDLED;
                        }
                        if (!drv_data->read(drv_data))
                        {
                                int_error_stop(drv_data,
                                                "interrupt_transfer: "
                                                "trailing byte read failed");
                                return IRQ_HANDLED;
                        }
                        int_transfer_complete(drv_data);
                }
        }

        /* We did something */
        return IRQ_HANDLED;
}

static irqreturn_t ssp_int(int irq, void *dev_id)
{
        struct driver_data *drv_data = dev_id;
        void __iomem *reg = drv_data->ioaddr;

        if (!drv_data->cur_msg) {

                write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
                write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
                if (drv_data->ssp_type != PXA25x_SSP)
                        write_SSTO(0, reg);
                write_SSSR(drv_data->clear_sr, reg);

                dev_err(&drv_data->pdev->dev, "bad message state "
                        "in interrupt handler\n");

                /* Never fail */
                return IRQ_HANDLED;
        }

        return drv_data->transfer_handler(drv_data);
}

static int set_dma_burst_and_threshold(struct chip_data *chip,
                                struct spi_device *spi,
                                u8 bits_per_word, u32 *burst_code,
                                u32 *threshold)
{
        struct pxa2xx_spi_chip *chip_info =
                        (struct pxa2xx_spi_chip *)spi->controller_data;
        int bytes_per_word;
        int burst_bytes;
        int thresh_words;
        int req_burst_size;
        int retval = 0;

        /* Set the threshold (in registers) to equal the same amount of data
         * as represented by burst size (in bytes).  The computation below
         * is (burst_size rounded up to nearest 8 byte, word or long word)
         * divided by (bytes/register); the tx threshold is the inverse of
         * the rx, so that there will always be enough data in the rx fifo
         * to satisfy a burst, and there will always be enough space in the
         * tx fifo to accept a burst (a tx burst will overwrite the fifo if
         * there is not enough space), there must always remain enough empty
         * space in the rx fifo for any data loaded to the tx fifo.
         * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
         * will be 8, or half the fifo;
         * The threshold can only be set to 2, 4 or 8, but not 16, because
         * to burst 16 to the tx fifo, the fifo would have to be empty;
         * however, the minimum fifo trigger level is 1, and the tx will
         * request service when the fifo is at this level, with only 15 spaces.
         */

        /* find bytes/word */
        if (bits_per_word <= 8)
                bytes_per_word = 1;
        else if (bits_per_word <= 16)
                bytes_per_word = 2;
        else
                bytes_per_word = 4;

        /* use struct pxa2xx_spi_chip->dma_burst_size if available */
        if (chip_info)
                req_burst_size = chip_info->dma_burst_size;
        else {
                switch (chip->dma_burst_size) {
                default:
                        /* if the default burst size is not set,
                         * do it now */
                        chip->dma_burst_size = DCMD_BURST8;
                case DCMD_BURST8:
                        req_burst_size = 8;
                        break;
                case DCMD_BURST16:
                        req_burst_size = 16;
                        break;
                case DCMD_BURST32:
                        req_burst_size = 32;
                        break;
                }
        }
        if (req_burst_size <= 8) {
                *burst_code = DCMD_BURST8;
                burst_bytes = 8;
        } else if (req_burst_size <= 16) {
                if (bytes_per_word == 1) {
                        /* don't burst more than 1/2 the fifo */
                        *burst_code = DCMD_BURST8;
                        burst_bytes = 8;
                        retval = 1;
                } else {
                        *burst_code = DCMD_BURST16;
                        burst_bytes = 16;
                }
        } else {
                if (bytes_per_word == 1) {
                        /* don't burst more than 1/2 the fifo */
                        *burst_code = DCMD_BURST8;
                        burst_bytes = 8;
                        retval = 1;
                } else if (bytes_per_word == 2) {
                        /* don't burst more than 1/2 the fifo */
                        *burst_code = DCMD_BURST16;
                        burst_bytes = 16;
                        retval = 1;
                } else {
                        *burst_code = DCMD_BURST32;
                        burst_bytes = 32;
                }
        }

        thresh_words = burst_bytes / bytes_per_word;

        /* thresh_words will be between 2 and 8 */
        *threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
                        | (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);

        return retval;
}

static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
{
        unsigned long ssp_clk = clk_get_rate(ssp->clk);

        if (ssp->type == PXA25x_SSP)
                return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
        else
                return ((ssp_clk / rate - 1) & 0xfff) << 8;
}

static void pump_transfers(unsigned long data)
{
        struct driver_data *drv_data = (struct driver_data *)data;
        struct spi_message *message = NULL;
        struct spi_transfer *transfer = NULL;
        struct spi_transfer *previous = NULL;
        struct chip_data *chip = NULL;
        struct ssp_device *ssp = drv_data->ssp;
        void __iomem *reg = drv_data->ioaddr;
        u32 clk_div = 0;
        u8 bits = 0;
        u32 speed = 0;
        u32 cr0;
        u32 cr1;
        u32 dma_thresh = drv_data->cur_chip->dma_threshold;
        u32 dma_burst = drv_data->cur_chip->dma_burst_size;

        /* Get current state information */
        message = drv_data->cur_msg;
        transfer = drv_data->cur_transfer;
        chip = drv_data->cur_chip;

        /* Handle for abort */
        if (message->state == ERROR_STATE) {
                message->status = -EIO;
                giveback(drv_data);
                return;
        }

        /* Handle end of message */
        if (message->state == DONE_STATE) {
                message->status = 0;
                giveback(drv_data);
                return;
        }

        /* Delay if requested at end of transfer before CS change */
        if (message->state == RUNNING_STATE) {
                previous = list_entry(transfer->transfer_list.prev,
                                        struct spi_transfer,
                                        transfer_list);
                if (previous->delay_usecs)
                        udelay(previous->delay_usecs);

                /* Drop chip select only if cs_change is requested */
                if (previous->cs_change)
                        drv_data->cs_control(PXA2XX_CS_DEASSERT);
        }

        /* Check for transfers that need multiple DMA segments */
        if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {

                /* reject already-mapped transfers; PIO won't always work */
                if (message->is_dma_mapped
                                || transfer->rx_dma || transfer->tx_dma) {
                        dev_err(&drv_data->pdev->dev,
                                "pump_transfers: mapped transfer length "
                                "of %u is greater than %d\n",
                                transfer->len, MAX_DMA_LEN);
                        message->status = -EINVAL;
                        giveback(drv_data);
                        return;
                }

                /* warn ... we force this to PIO mode */
                if (printk_ratelimit())
                        dev_warn(&message->spi->dev, "pump_transfers: "
                                "DMA disabled for transfer length %ld "
                                "greater than %d\n",
                                (long)drv_data->len, MAX_DMA_LEN);
        }

        /* Setup the transfer state based on the type of transfer */
        if (flush(drv_data) == 0) {
                dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
                message->status = -EIO;
                giveback(drv_data);
                return;
        }
        drv_data->n_bytes = chip->n_bytes;
        drv_data->dma_width = chip->dma_width;
        drv_data->cs_control = chip->cs_control;
        drv_data->tx = (void *)transfer->tx_buf;
        drv_data->tx_end = drv_data->tx + transfer->len;
        drv_data->rx = transfer->rx_buf;
        drv_data->rx_end = drv_data->rx + transfer->len;
        drv_data->rx_dma = transfer->rx_dma;
        drv_data->tx_dma = transfer->tx_dma;
        drv_data->len = transfer->len & DCMD_LENGTH;
        drv_data->write = drv_data->tx ? chip->write : null_writer;
        drv_data->read = drv_data->rx ? chip->read : null_reader;

        /* Change speed and bit per word on a per transfer */
        cr0 = chip->cr0;
        if (transfer->speed_hz || transfer->bits_per_word) {

                bits = chip->bits_per_word;
                speed = chip->speed_hz;

                if (transfer->speed_hz)
                        speed = transfer->speed_hz;

                if (transfer->bits_per_word)
                        bits = transfer->bits_per_word;

                clk_div = ssp_get_clk_div(ssp, speed);

                if (bits <= 8) {
                        drv_data->n_bytes = 1;
                        drv_data->dma_width = DCMD_WIDTH1;
                        drv_data->read = drv_data->read != null_reader ?
                                                u8_reader : null_reader;
                        drv_data->write = drv_data->write != null_writer ?
                                                u8_writer : null_writer;
                } else if (bits <= 16) {
                        drv_data->n_bytes = 2;
                        drv_data->dma_width = DCMD_WIDTH2;
                        drv_data->read = drv_data->read != null_reader ?
                                                u16_reader : null_reader;
                        drv_data->write = drv_data->write != null_writer ?
                                                u16_writer : null_writer;
                } else if (bits <= 32) {
                        drv_data->n_bytes = 4;
                        drv_data->dma_width = DCMD_WIDTH4;
                        drv_data->read = drv_data->read != null_reader ?
                                                u32_reader : null_reader;
                        drv_data->write = drv_data->write != null_writer ?
                                                u32_writer : null_writer;
                }
                /* if bits/word is changed in dma mode, then must check the
                 * thresholds and burst also */
                if (chip->enable_dma) {
                        if (set_dma_burst_and_threshold(chip, message->spi,
                                                        bits, &dma_burst,
                                                        &dma_thresh))
                                if (printk_ratelimit())
                                        dev_warn(&message->spi->dev,
                                                "pump_transfers: "
                                                "DMA burst size reduced to "
                                                "match bits_per_word\n");
                }

                cr0 = clk_div
                        | SSCR0_Motorola
                        | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
                        | SSCR0_SSE
                        | (bits > 16 ? SSCR0_EDSS : 0);
        }

        message->state = RUNNING_STATE;

        /* Try to map dma buffer and do a dma transfer if successful, but
         * only if the length is non-zero and less than MAX_DMA_LEN.
         *
         * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
         * of PIO instead.  Care is needed above because the transfer may
         * have have been passed with buffers that are already dma mapped.
         * A zero-length transfer in PIO mode will not try to write/read
         * to/from the buffers
         *
         * REVISIT large transfers are exactly where we most want to be
         * using DMA.  If this happens much, split those transfers into
         * multiple DMA segments rather than forcing PIO.
         */
        drv_data->dma_mapped = 0;
        if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
                drv_data->dma_mapped = map_dma_buffers(drv_data);
        if (drv_data->dma_mapped) {

                /* Ensure we have the correct interrupt handler */
                drv_data->transfer_handler = dma_transfer;

                /* Setup rx DMA Channel */
                DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
                DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
                DTADR(drv_data->rx_channel) = drv_data->rx_dma;
                if (drv_data->rx == drv_data->null_dma_buf)
                        /* No target address increment */
                        DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
                                                        | drv_data->dma_width
                                                        | dma_burst
                                                        | drv_data->len;
                else
                        DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
                                                        | DCMD_FLOWSRC
                                                        | drv_data->dma_width
                                                        | dma_burst
                                                        | drv_data->len;

                /* Setup tx DMA Channel */
                DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
                DSADR(drv_data->tx_channel) = drv_data->tx_dma;
                DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
                if (drv_data->tx == drv_data->null_dma_buf)
                        /* No source address increment */
                        DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
                                                        | drv_data->dma_width
                                                        | dma_burst
                                                        | drv_data->len;
                else
                        DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
                                                        | DCMD_FLOWTRG
                                                        | drv_data->dma_width
                                                        | dma_burst
                                                        | drv_data->len;

                /* Enable dma end irqs on SSP to detect end of transfer */
                if (drv_data->ssp_type == PXA25x_SSP)
                        DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;

                /* Clear status and start DMA engine */
                cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1;
                write_SSSR(drv_data->clear_sr, reg);
                DCSR(drv_data->rx_channel) |= DCSR_RUN;
                DCSR(drv_data->tx_channel) |= DCSR_RUN;
        } else {
                /* Ensure we have the correct interrupt handler */
                drv_data->transfer_handler = interrupt_transfer;

                /* Clear status  */
                cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
                write_SSSR(drv_data->clear_sr, reg);
        }

        /* see if we need to reload the config registers */
        if ((read_SSCR0(reg) != cr0)
                || (read_SSCR1(reg) & SSCR1_CHANGE_MASK) !=
                        (cr1 & SSCR1_CHANGE_MASK)) {

                /* stop the SSP, and update the other bits */
                write_SSCR0(cr0 & ~SSCR0_SSE, reg);
                if (drv_data->ssp_type != PXA25x_SSP)
                        write_SSTO(chip->timeout, reg);
                /* first set CR1 without interrupt and service enables */
                write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg);
                /* restart the SSP */
                write_SSCR0(cr0, reg);

        } else {
                if (drv_data->ssp_type != PXA25x_SSP)
                        write_SSTO(chip->timeout, reg);
        }

        /* FIXME, need to handle cs polarity,
         * this driver uses struct pxa2xx_spi_chip.cs_control to
         * specify a CS handling function, and it ignores most
         * struct spi_device.mode[s], including SPI_CS_HIGH */
        drv_data->cs_control(PXA2XX_CS_ASSERT);

        /* after chip select, release the data by enabling service
         * requests and interrupts, without changing any mode bits */
        write_SSCR1(cr1, reg);
}

static void pump_messages(struct work_struct *work)
{
        struct driver_data *drv_data =
                container_of(work, struct driver_data, pump_messages);
        unsigned long flags;

        /* Lock queue and check for queue work */
        spin_lock_irqsave(&drv_data->lock, flags);
        if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
                drv_data->busy = 0;
                spin_unlock_irqrestore(&drv_data->lock, flags);
                return;
        }

        /* Make sure we are not already running a message */
        if (drv_data->cur_msg) {
                spin_unlock_irqrestore(&drv_data->lock, flags);
                return;
        }

        /* Extract head of queue */
        drv_data->cur_msg = list_entry(drv_data->queue.next,
                                        struct spi_message, queue);
        list_del_init(&drv_data->cur_msg->queue);

        /* Initial message state*/
        drv_data->cur_msg->state = START_STATE;
        drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
                                                struct spi_transfer,
                                                transfer_list);

        /* prepare to setup the SSP, in pump_transfers, using the per
         * chip configuration */
        drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);

        /* Mark as busy and launch transfers */
        tasklet_schedule(&drv_data->pump_transfers);

        drv_data->busy = 1;
        spin_unlock_irqrestore(&drv_data->lock, flags);
}

static int transfer(struct spi_device *spi, struct spi_message *msg)
{
        struct driver_data *drv_data = spi_master_get_devdata(spi->master);
        unsigned long flags;

        spin_lock_irqsave(&drv_data->lock, flags);

        if (drv_data->run == QUEUE_STOPPED) {
                spin_unlock_irqrestore(&drv_data->lock, flags);
                return -ESHUTDOWN;
        }

        msg->actual_length = 0;
        msg->status = -EINPROGRESS;
        msg->state = START_STATE;

        list_add_tail(&msg->queue, &drv_data->queue);

        if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
                queue_work(drv_data->workqueue, &drv_data->pump_messages);

        spin_unlock_irqrestore(&drv_data->lock, flags);

        return 0;
}

/* the spi->mode bits understood by this driver: */
#define MODEBITS (SPI_CPOL | SPI_CPHA)

static int setup(struct spi_device *spi)
{
        struct pxa2xx_spi_chip *chip_info = NULL;
        struct chip_data *chip;
        struct driver_data *drv_data = spi_master_get_devdata(spi->master);
        struct ssp_device *ssp = drv_data->ssp;
        unsigned int clk_div;
        uint tx_thres = TX_THRESH_DFLT;
        uint rx_thres = RX_THRESH_DFLT;

        if (!spi->bits_per_word)
                spi->bits_per_word = 8;

        if (drv_data->ssp_type != PXA25x_SSP
                && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
                dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
                                "b/w not 4-32 for type non-PXA25x_SSP\n",
                                drv_data->ssp_type, spi->bits_per_word);
                return -EINVAL;
        }
        else if (drv_data->ssp_type == PXA25x_SSP
                        && (spi->bits_per_word < 4
                                || spi->bits_per_word > 16)) {
                dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
                                "b/w not 4-16 for type PXA25x_SSP\n",
                                drv_data->ssp_type, spi->bits_per_word);
                return -EINVAL;
        }

        if (spi->mode & ~MODEBITS) {
                dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
                        spi->mode & ~MODEBITS);
                return -EINVAL;
        }

        /* Only alloc on first setup */
        chip = spi_get_ctldata(spi);
        if (!chip) {
                chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
                if (!chip) {
                        dev_err(&spi->dev,
                                "failed setup: can't allocate chip data\n");
                        return -ENOMEM;
                }

                chip->cs_control = null_cs_control;
                chip->enable_dma = 0;
                chip->timeout = TIMOUT_DFLT;
                chip->dma_burst_size = drv_data->master_info->enable_dma ?
                                        DCMD_BURST8 : 0;
        }

        /* protocol drivers may change the chip settings, so...
         * if chip_info exists, use it */
        chip_info = spi->controller_data;

        /* chip_info isn't always needed */
        chip->cr1 = 0;
        if (chip_info) {
                if (chip_info->cs_control)
                        chip->cs_control = chip_info->cs_control;
                if (chip_info->timeout)
                        chip->timeout = chip_info->timeout;
                if (chip_info->tx_threshold)
                        tx_thres = chip_info->tx_threshold;
                if (chip_info->rx_threshold)
                        rx_thres = chip_info->rx_threshold;
                chip->enable_dma = drv_data->master_info->enable_dma;
                chip->dma_threshold = 0;
                if (chip_info->enable_loopback)
                        chip->cr1 = SSCR1_LBM;
        }

        chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) |
                        (SSCR1_TxTresh(tx_thres) & SSCR1_TFT);

        /* set dma burst and threshold outside of chip_info path so that if
         * chip_info goes away after setting chip->enable_dma, the
         * burst and threshold can still respond to changes in bits_per_word */
        if (chip->enable_dma) {
                /* set up legal burst and threshold for dma */
                if (set_dma_burst_and_threshold(chip, spi, spi->bits_per_word,
                                                &chip->dma_burst_size,
                                                &chip->dma_threshold)) {
                        dev_warn(&spi->dev, "in setup: DMA burst size reduced "
                                        "to match bits_per_word\n");
                }
        }

        clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
        chip->speed_hz = spi->max_speed_hz;

        chip->cr0 = clk_div
                        | SSCR0_Motorola
                        | SSCR0_DataSize(spi->bits_per_word > 16 ?
                                spi->bits_per_word - 16 : spi->bits_per_word)
                        | SSCR0_SSE
                        | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
        chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
        chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
                        | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);

        /* NOTE:  PXA25x_SSP _could_ use external clocking ... */
        if (drv_data->ssp_type != PXA25x_SSP)
                dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n",
                                spi->bits_per_word,
                                clk_get_rate(ssp->clk)
                                        / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
                                spi->mode & 0x3,
                                chip->enable_dma ? "DMA" : "PIO");
        else
                dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n",
                                spi->bits_per_word,
                                clk_get_rate(ssp->clk) / 2
                                        / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
                                spi->mode & 0x3,
                                chip->enable_dma ? "DMA" : "PIO");

        if (spi->bits_per_word <= 8) {
                chip->n_bytes = 1;
                chip->dma_width = DCMD_WIDTH1;
                chip->read = u8_reader;
                chip->write = u8_writer;
        } else if (spi->bits_per_word <= 16) {
                chip->n_bytes = 2;
                chip->dma_width = DCMD_WIDTH2;
                chip->read = u16_reader;
                chip->write = u16_writer;
        } else if (spi->bits_per_word <= 32) {
                chip->cr0 |= SSCR0_EDSS;
                chip->n_bytes = 4;
                chip->dma_width = DCMD_WIDTH4;
                chip->read = u32_reader;
                chip->write = u32_writer;
        } else {
                dev_err(&spi->dev, "invalid wordsize\n");
                return -ENODEV;
        }
        chip->bits_per_word = spi->bits_per_word;

        spi_set_ctldata(spi, chip);

        return 0;
}

static void cleanup(struct spi_device *spi)
{
        struct chip_data *chip = spi_get_ctldata(spi);

        kfree(chip);
}

static int __init init_queue(struct driver_data *drv_data)
{
        INIT_LIST_HEAD(&drv_data->queue);
        spin_lock_init(&drv_data->lock);

        drv_data->run = QUEUE_STOPPED;
        drv_data->busy = 0;

        tasklet_init(&drv_data->pump_transfers,
                        pump_transfers, (unsigned long)drv_data);

        INIT_WORK(&drv_data->pump_messages, pump_messages);
        drv_data->workqueue = create_singlethread_workqueue(
                                dev_name(drv_data->master->dev.parent));
        if (drv_data->workqueue == NULL)
                return -EBUSY;

        return 0;
}

static int start_queue(struct driver_data *drv_data)
{
        unsigned long flags;

        spin_lock_irqsave(&drv_data->lock, flags);

        if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
                spin_unlock_irqrestore(&drv_data->lock, flags);
                return -EBUSY;
        }

        drv_data->run = QUEUE_RUNNING;
        drv_data->cur_msg = NULL;
        drv_data->cur_transfer = NULL;
        drv_data->cur_chip = NULL;
        spin_unlock_irqrestore(&drv_data->lock, flags);

        queue_work(drv_data->workqueue, &drv_data->pump_messages);

        return 0;
}

static int stop_queue(struct driver_data *drv_data)
{
        unsigned long flags;
        unsigned limit = 500;
        int status = 0;

        spin_lock_irqsave(&drv_data->lock, flags);

        /* This is a bit lame, but is optimized for the common execution path.
         * A wait_queue on the drv_data->busy could be used, but then the common
         * execution path (pump_messages) would be required to call wake_up or
         * friends on every SPI message. Do this instead */
        drv_data->run = QUEUE_STOPPED;
        while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
                spin_unlock_irqrestore(&drv_data->lock, flags);
                msleep(10);
                spin_lock_irqsave(&drv_data->lock, flags);
        }

        if (!list_empty(&drv_data->queue) || drv_data->busy)
                status = -EBUSY;

        spin_unlock_irqrestore(&drv_data->lock, flags);

        return status;
}

static int destroy_queue(struct driver_data *drv_data)
{
        int status;

        status = stop_queue(drv_data);
        /* we are unloading the module or failing to load (only two calls
         * to this routine), and neither call can handle a return value.
         * However, destroy_workqueue calls flush_workqueue, and that will
         * block until all work is done.  If the reason that stop_queue
         * timed out is that the work will never finish, then it does no
         * good to call destroy_workqueue, so return anyway. */
        if (status != 0)
                return status;

        destroy_workqueue(drv_data->workqueue);

        return 0;
}

static int __init pxa2xx_spi_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct pxa2xx_spi_master *platform_info;
        struct spi_master *master;
        struct driver_data *drv_data;
        struct ssp_device *ssp;
        int status;

        platform_info = dev->platform_data;

        ssp = ssp_request(pdev->id, pdev->name);
        if (ssp == NULL) {
                dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
                return -ENODEV;
        }

        /* Allocate master with space for drv_data and null dma buffer */
        master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
        if (!master) {
                dev_err(&pdev->dev, "cannot alloc spi_master\n");
                ssp_free(ssp);
                return -ENOMEM;
        }
        drv_data = spi_master_get_devdata(master);
        drv_data->master = master;
        drv_data->master_info = platform_info;
        drv_data->pdev = pdev;
        drv_data->ssp = ssp;

        master->bus_num = pdev->id;
        master->num_chipselect = platform_info->num_chipselect;
        master->cleanup = cleanup;
        master->setup = setup;
        master->transfer = transfer;

        drv_data->ssp_type = ssp->type;
        drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
                                                sizeof(struct driver_data)), 8);

        drv_data->ioaddr = ssp->mmio_base;
        drv_data->ssdr_physical = ssp->phys_base + SSDR;
        if (ssp->type == PXA25x_SSP) {
                drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
                drv_data->dma_cr1 = 0;
                drv_data->clear_sr = SSSR_ROR;
                drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
        } else {
                drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
                drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
                drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
                drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
        }

        status = request_irq(ssp->irq, ssp_int, 0, dev_name(dev), drv_data);
        if (status < 0) {
                dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
                goto out_error_master_alloc;
        }

        /* Setup DMA if requested */
        drv_data->tx_channel = -1;
        drv_data->rx_channel = -1;
        if (platform_info->enable_dma) {

                /* Get two DMA channels (rx and tx) */
                drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
                                                        DMA_PRIO_HIGH,
                                                        dma_handler,
                                                        drv_data);
                if (drv_data->rx_channel < 0) {
                        dev_err(dev, "problem (%d) requesting rx channel\n",
                                drv_data->rx_channel);
                        status = -ENODEV;
                        goto out_error_irq_alloc;
                }
                drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
                                                        DMA_PRIO_MEDIUM,
                                                        dma_handler,
                                                        drv_data);
                if (drv_data->tx_channel < 0) {
                        dev_err(dev, "problem (%d) requesting tx channel\n",
                                drv_data->tx_channel);
                        status = -ENODEV;
                        goto out_error_dma_alloc;
                }

                DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
                DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
        }

        /* Enable SOC clock */
        clk_enable(ssp->clk);

        /* Load default SSP configuration */
        write_SSCR0(0, drv_data->ioaddr);
        write_SSCR1(SSCR1_RxTresh(RX_THRESH_DFLT) |
                                SSCR1_TxTresh(TX_THRESH_DFLT),
                                drv_data->ioaddr);
        write_SSCR0(SSCR0_SerClkDiv(2)
                        | SSCR0_Motorola
                        | SSCR0_DataSize(8),
                        drv_data->ioaddr);
        if (drv_data->ssp_type != PXA25x_SSP)
                write_SSTO(0, drv_data->ioaddr);
        write_SSPSP(0, drv_data->ioaddr);

        /* Initial and start queue */
        status = init_queue(drv_data);
        if (status != 0) {
                dev_err(&pdev->dev, "problem initializing queue\n");
                goto out_error_clock_enabled;
        }
        status = start_queue(drv_data);
        if (status != 0) {
                dev_err(&pdev->dev, "problem starting queue\n");
                goto out_error_clock_enabled;
        }

        /* Register with the SPI framework */
        platform_set_drvdata(pdev, drv_data);
        status = spi_register_master(master);
        if (status != 0) {
                dev_err(&pdev->dev, "problem registering spi master\n");
                goto out_error_queue_alloc;
        }

        return status;

out_error_queue_alloc:
        destroy_queue(drv_data);

out_error_clock_enabled:
        clk_disable(ssp->clk);

out_error_dma_alloc:
        if (drv_data->tx_channel != -1)
                pxa_free_dma(drv_data->tx_channel);
        if (drv_data->rx_channel != -1)
                pxa_free_dma(drv_data->rx_channel);

out_error_irq_alloc:
        free_irq(ssp->irq, drv_data);

out_error_master_alloc:
        spi_master_put(master);
        ssp_free(ssp);
        return status;
}

static int pxa2xx_spi_remove(struct platform_device *pdev)
{
        struct driver_data *drv_data = platform_get_drvdata(pdev);
        struct ssp_device *ssp;
        int status = 0;

        if (!drv_data)
                return 0;
        ssp = drv_data->ssp;

        /* Remove the queue */
        status = destroy_queue(drv_data);
        if (status != 0)
                /* the kernel does not check the return status of this
                 * this routine (mod->exit, within the kernel).  Therefore
                 * nothing is gained by returning from here, the module is
                 * going away regardless, and we should not leave any more
                 * resources allocated than necessary.  We cannot free the
                 * message memory in drv_data->queue, but we can release the
                 * resources below.  I think the kernel should honor -EBUSY
                 * returns but... */
                dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
                        "complete, message memory not freed\n");

        /* Disable the SSP at the peripheral and SOC level */
        write_SSCR0(0, drv_data->ioaddr);
        clk_disable(ssp->clk);

        /* Release DMA */
        if (drv_data->master_info->enable_dma) {
                DRCMR(ssp->drcmr_rx) = 0;
                DRCMR(ssp->drcmr_tx) = 0;
                pxa_free_dma(drv_data->tx_channel);
                pxa_free_dma(drv_data->rx_channel);
        }

        /* Release IRQ */
        free_irq(ssp->irq, drv_data);

        /* Release SSP */
        ssp_free(ssp);

        /* Disconnect from the SPI framework */
        spi_unregister_master(drv_data->master);

        /* Prevent double remove */
        platform_set_drvdata(pdev, NULL);

        return 0;
}

static void pxa2xx_spi_shutdown(struct platform_device *pdev)
{
        int status = 0;

        if ((status = pxa2xx_spi_remove(pdev)) != 0)
                dev_err(&pdev->dev, "shutdown failed with %d\n", status);
}

#ifdef CONFIG_PM

static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
{
        struct driver_data *drv_data = platform_get_drvdata(pdev);
        struct ssp_device *ssp = drv_data->ssp;
        int status = 0;

        status = stop_queue(drv_data);
        if (status != 0)
                return status;
        write_SSCR0(0, drv_data->ioaddr);
        clk_disable(ssp->clk);

        return 0;
}

static int pxa2xx_spi_resume(struct platform_device *pdev)
{
        struct driver_data *drv_data = platform_get_drvdata(pdev);
        struct ssp_device *ssp = drv_data->ssp;
        int status = 0;

        /* Enable the SSP clock */
        clk_enable(ssp->clk);

        /* Start the queue running */
        status = start_queue(drv_data);
        if (status != 0) {
                dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
                return status;
        }

        return 0;
}
#else
#define pxa2xx_spi_suspend NULL
#define pxa2xx_spi_resume NULL
#endif /* CONFIG_PM */

static struct platform_driver driver = {
        .driver = {
                .name = "pxa2xx-spi",
                .owner = THIS_MODULE,
        },
        .remove = pxa2xx_spi_remove,
        .shutdown = pxa2xx_spi_shutdown,
        .suspend = pxa2xx_spi_suspend,
        .resume = pxa2xx_spi_resume,
};

static int __init pxa2xx_spi_init(void)
{
        return platform_driver_probe(&driver, pxa2xx_spi_probe);
}
module_init(pxa2xx_spi_init);

static void __exit pxa2xx_spi_exit(void)
{
        platform_driver_unregister(&driver);
}
module_exit(pxa2xx_spi_exit);