git.oblomov.eu Git - linux-2.6/blob - drivers/usb/gadget/fsl_usb2_udc.c

   1 /*
   2  * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved.
   3  *
   4  * Author: Li Yang <leoli@freescale.com>
   5  *         Jiang Bo <tanya.jiang@freescale.com>
   6  *
   7  * Description:
   8  * Freescale high-speed USB SOC DR module device controller driver.
   9  * This can be found on MPC8349E/MPC8313E cpus.
  10  * The driver is previously named as mpc_udc.  Based on bare board
  11  * code from Dave Liu and Shlomi Gridish.
  12  *
  13  * This program is free software; you can redistribute  it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #undef VERBOSE
  20
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/ioport.h>
  24 #include <linux/types.h>
  25 #include <linux/errno.h>
  26 #include <linux/slab.h>
  27 #include <linux/init.h>
  28 #include <linux/list.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/proc_fs.h>
  31 #include <linux/mm.h>
  32 #include <linux/moduleparam.h>
  33 #include <linux/device.h>
  34 #include <linux/usb/ch9.h>
  35 #include <linux/usb/gadget.h>
  36 #include <linux/usb/otg.h>
  37 #include <linux/dma-mapping.h>
  38 #include <linux/platform_device.h>
  39 #include <linux/fsl_devices.h>
  40 #include <linux/dmapool.h>
  41
  42 #include <asm/byteorder.h>
  43 #include <asm/io.h>
  44 #include <asm/system.h>
  45 #include <asm/unaligned.h>
  46 #include <asm/dma.h>
  47
  48 #include "fsl_usb2_udc.h"
  49
  50 #define DRIVER_DESC     "Freescale High-Speed USB SOC Device Controller driver"
  51 #define DRIVER_AUTHOR   "Li Yang/Jiang Bo"
  52 #define DRIVER_VERSION  "Apr 20, 2007"
  53
  54 #define DMA_ADDR_INVALID        (~(dma_addr_t)0)
  55
  56 static const char driver_name[] = "fsl-usb2-udc";
  57 static const char driver_desc[] = DRIVER_DESC;
  58
  59 static struct usb_dr_device *dr_regs;
  60 static struct usb_sys_interface *usb_sys_regs;
  61
  62 /* it is initialized in probe()  */
  63 static struct fsl_udc *udc_controller = NULL;
  64
  65 static const struct usb_endpoint_descriptor
  66 fsl_ep0_desc = {
  67         .bLength =              USB_DT_ENDPOINT_SIZE,
  68         .bDescriptorType =      USB_DT_ENDPOINT,
  69         .bEndpointAddress =     0,
  70         .bmAttributes =         USB_ENDPOINT_XFER_CONTROL,
  71         .wMaxPacketSize =       USB_MAX_CTRL_PAYLOAD,
  72 };
  73
  74 static void fsl_ep_fifo_flush(struct usb_ep *_ep);
  75
  76 #ifdef CONFIG_PPC32
  77 #define fsl_readl(addr)         in_le32(addr)
  78 #define fsl_writel(val32, addr) out_le32(addr, val32)
  79 #else
  80 #define fsl_readl(addr)         readl(addr)
  81 #define fsl_writel(val32, addr) writel(val32, addr)
  82 #endif
  83
  84 /********************************************************************
  85  *      Internal Used Function
  86 ********************************************************************/
  87 /*-----------------------------------------------------------------
  88  * done() - retire a request; caller blocked irqs
  89  * @status : request status to be set, only works when
  90  *      request is still in progress.
  91  *--------------------------------------------------------------*/
  92 static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
  93 {
  94         struct fsl_udc *udc = NULL;
  95         unsigned char stopped = ep->stopped;
  96         struct ep_td_struct *curr_td, *next_td;
  97         int j;
  98
  99         udc = (struct fsl_udc *)ep->udc;
 100         /* Removed the req from fsl_ep->queue */
 101         list_del_init(&req->queue);
 102
 103         /* req.status should be set as -EINPROGRESS in ep_queue() */
 104         if (req->req.status == -EINPROGRESS)
 105                 req->req.status = status;
 106         else
 107                 status = req->req.status;
 108
 109         /* Free dtd for the request */
 110         next_td = req->head;
 111         for (j = 0; j < req->dtd_count; j++) {
 112                 curr_td = next_td;
 113                 if (j != req->dtd_count - 1) {
 114                         next_td = curr_td->next_td_virt;
 115                 }
 116                 dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma);
 117         }
 118
 119         if (req->mapped) {
 120                 dma_unmap_single(ep->udc->gadget.dev.parent,
 121                         req->req.dma, req->req.length,
 122                         ep_is_in(ep)
 123                                 ? DMA_TO_DEVICE
 124                                 : DMA_FROM_DEVICE);
 125                 req->req.dma = DMA_ADDR_INVALID;
 126                 req->mapped = 0;
 127         } else
 128                 dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
 129                         req->req.dma, req->req.length,
 130                         ep_is_in(ep)
 131                                 ? DMA_TO_DEVICE
 132                                 : DMA_FROM_DEVICE);
 133
 134         if (status && (status != -ESHUTDOWN))
 135                 VDBG("complete %s req %p stat %d len %u/%u",
 136                         ep->ep.name, &req->req, status,
 137                         req->req.actual, req->req.length);
 138
 139         ep->stopped = 1;
 140
 141         spin_unlock(&ep->udc->lock);
 142         /* complete() is from gadget layer,
 143          * eg fsg->bulk_in_complete() */
 144         if (req->req.complete)
 145                 req->req.complete(&ep->ep, &req->req);
 146
 147         spin_lock(&ep->udc->lock);
 148         ep->stopped = stopped;
 149 }
 150
 151 /*-----------------------------------------------------------------
 152  * nuke(): delete all requests related to this ep
 153  * called with spinlock held
 154  *--------------------------------------------------------------*/
 155 static void nuke(struct fsl_ep *ep, int status)
 156 {
 157         ep->stopped = 1;
 158
 159         /* Flush fifo */
 160         fsl_ep_fifo_flush(&ep->ep);
 161
 162         /* Whether this eq has request linked */
 163         while (!list_empty(&ep->queue)) {
 164                 struct fsl_req *req = NULL;
 165
 166                 req = list_entry(ep->queue.next, struct fsl_req, queue);
 167                 done(ep, req, status);
 168         }
 169 }
 170
 171 /*------------------------------------------------------------------
 172         Internal Hardware related function
 173  ------------------------------------------------------------------*/
 174
 175 static int dr_controller_setup(struct fsl_udc *udc)
 176 {
 177         unsigned int tmp = 0, portctrl = 0, ctrl = 0;
 178         unsigned long timeout;
 179 #define FSL_UDC_RESET_TIMEOUT 1000
 180
 181         /* Stop and reset the usb controller */
 182         tmp = fsl_readl(&dr_regs->usbcmd);
 183         tmp &= ~USB_CMD_RUN_STOP;
 184         fsl_writel(tmp, &dr_regs->usbcmd);
 185
 186         tmp = fsl_readl(&dr_regs->usbcmd);
 187         tmp |= USB_CMD_CTRL_RESET;
 188         fsl_writel(tmp, &dr_regs->usbcmd);
 189
 190         /* Wait for reset to complete */
 191         timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
 192         while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
 193                 if (time_after(jiffies, timeout)) {
 194                         ERR("udc reset timeout!\n");
 195                         return -ETIMEDOUT;
 196                 }
 197                 cpu_relax();
 198         }
 199
 200         /* Set the controller as device mode */
 201         tmp = fsl_readl(&dr_regs->usbmode);
 202         tmp |= USB_MODE_CTRL_MODE_DEVICE;
 203         /* Disable Setup Lockout */
 204         tmp |= USB_MODE_SETUP_LOCK_OFF;
 205         fsl_writel(tmp, &dr_regs->usbmode);
 206
 207         /* Clear the setup status */
 208         fsl_writel(0, &dr_regs->usbsts);
 209
 210         tmp = udc->ep_qh_dma;
 211         tmp &= USB_EP_LIST_ADDRESS_MASK;
 212         fsl_writel(tmp, &dr_regs->endpointlistaddr);
 213
 214         VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
 215                 udc->ep_qh, (int)tmp,
 216                 fsl_readl(&dr_regs->endpointlistaddr));
 217
 218         /* Config PHY interface */
 219         portctrl = fsl_readl(&dr_regs->portsc1);
 220         portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
 221         switch (udc->phy_mode) {
 222         case FSL_USB2_PHY_ULPI:
 223                 portctrl |= PORTSCX_PTS_ULPI;
 224                 break;
 225         case FSL_USB2_PHY_UTMI_WIDE:
 226                 portctrl |= PORTSCX_PTW_16BIT;
 227                 /* fall through */
 228         case FSL_USB2_PHY_UTMI:
 229                 portctrl |= PORTSCX_PTS_UTMI;
 230                 break;
 231         case FSL_USB2_PHY_SERIAL:
 232                 portctrl |= PORTSCX_PTS_FSLS;
 233                 break;
 234         default:
 235                 return -EINVAL;
 236         }
 237         fsl_writel(portctrl, &dr_regs->portsc1);
 238
 239         /* Config control enable i/o output, cpu endian register */
 240         ctrl = __raw_readl(&usb_sys_regs->control);
 241         ctrl |= USB_CTRL_IOENB;
 242         __raw_writel(ctrl, &usb_sys_regs->control);
 243
 244 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
 245         /* Turn on cache snooping hardware, since some PowerPC platforms
 246          * wholly rely on hardware to deal with cache coherent. */
 247
 248         /* Setup Snooping for all the 4GB space */
 249         tmp = SNOOP_SIZE_2GB;   /* starts from 0x0, size 2G */
 250         __raw_writel(tmp, &usb_sys_regs->snoop1);
 251         tmp |= 0x80000000;      /* starts from 0x8000000, size 2G */
 252         __raw_writel(tmp, &usb_sys_regs->snoop2);
 253 #endif
 254
 255         return 0;
 256 }
 257
 258 /* Enable DR irq and set controller to run state */
 259 static void dr_controller_run(struct fsl_udc *udc)
 260 {
 261         u32 temp;
 262
 263         /* Enable DR irq reg */
 264         temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
 265                 | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
 266                 | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN;
 267
 268         fsl_writel(temp, &dr_regs->usbintr);
 269
 270         /* Clear stopped bit */
 271         udc->stopped = 0;
 272
 273         /* Set the controller as device mode */
 274         temp = fsl_readl(&dr_regs->usbmode);
 275         temp |= USB_MODE_CTRL_MODE_DEVICE;
 276         fsl_writel(temp, &dr_regs->usbmode);
 277
 278         /* Set controller to Run */
 279         temp = fsl_readl(&dr_regs->usbcmd);
 280         temp |= USB_CMD_RUN_STOP;
 281         fsl_writel(temp, &dr_regs->usbcmd);
 282
 283         return;
 284 }
 285
 286 static void dr_controller_stop(struct fsl_udc *udc)
 287 {
 288         unsigned int tmp;
 289
 290         /* disable all INTR */
 291         fsl_writel(0, &dr_regs->usbintr);
 292
 293         /* Set stopped bit for isr */
 294         udc->stopped = 1;
 295
 296         /* disable IO output */
 297 /*      usb_sys_regs->control = 0; */
 298
 299         /* set controller to Stop */
 300         tmp = fsl_readl(&dr_regs->usbcmd);
 301         tmp &= ~USB_CMD_RUN_STOP;
 302         fsl_writel(tmp, &dr_regs->usbcmd);
 303
 304         return;
 305 }
 306
 307 static void dr_ep_setup(unsigned char ep_num, unsigned char dir,
 308                         unsigned char ep_type)
 309 {
 310         unsigned int tmp_epctrl = 0;
 311
 312         tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
 313         if (dir) {
 314                 if (ep_num)
 315                         tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
 316                 tmp_epctrl |= EPCTRL_TX_ENABLE;
 317                 tmp_epctrl |= ((unsigned int)(ep_type)
 318                                 << EPCTRL_TX_EP_TYPE_SHIFT);
 319         } else {
 320                 if (ep_num)
 321                         tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
 322                 tmp_epctrl |= EPCTRL_RX_ENABLE;
 323                 tmp_epctrl |= ((unsigned int)(ep_type)
 324                                 << EPCTRL_RX_EP_TYPE_SHIFT);
 325         }
 326
 327         fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
 328 }
 329
 330 static void
 331 dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value)
 332 {
 333         u32 tmp_epctrl = 0;
 334
 335         tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
 336
 337         if (value) {
 338                 /* set the stall bit */
 339                 if (dir)
 340                         tmp_epctrl |= EPCTRL_TX_EP_STALL;
 341                 else
 342                         tmp_epctrl |= EPCTRL_RX_EP_STALL;
 343         } else {
 344                 /* clear the stall bit and reset data toggle */
 345                 if (dir) {
 346                         tmp_epctrl &= ~EPCTRL_TX_EP_STALL;
 347                         tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
 348                 } else {
 349                         tmp_epctrl &= ~EPCTRL_RX_EP_STALL;
 350                         tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
 351                 }
 352         }
 353         fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
 354 }
 355
 356 /* Get stall status of a specific ep
 357    Return: 0: not stalled; 1:stalled */
 358 static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
 359 {
 360         u32 epctrl;
 361
 362         epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
 363         if (dir)
 364                 return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0;
 365         else
 366                 return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0;
 367 }
 368
 369 /********************************************************************
 370         Internal Structure Build up functions
 371 ********************************************************************/
 372
 373 /*------------------------------------------------------------------
 374 * struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
 375  * @zlt: Zero Length Termination Select (1: disable; 0: enable)
 376  * @mult: Mult field
 377  ------------------------------------------------------------------*/
 378 static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
 379                 unsigned char dir, unsigned char ep_type,
 380                 unsigned int max_pkt_len,
 381                 unsigned int zlt, unsigned char mult)
 382 {
 383         struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
 384         unsigned int tmp = 0;
 385
 386         /* set the Endpoint Capabilites in QH */
 387         switch (ep_type) {
 388         case USB_ENDPOINT_XFER_CONTROL:
 389                 /* Interrupt On Setup (IOS). for control ep  */
 390                 tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
 391                         | EP_QUEUE_HEAD_IOS;
 392                 break;
 393         case USB_ENDPOINT_XFER_ISOC:
 394                 tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
 395                         | (mult << EP_QUEUE_HEAD_MULT_POS);
 396                 break;
 397         case USB_ENDPOINT_XFER_BULK:
 398         case USB_ENDPOINT_XFER_INT:
 399                 tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
 400                 break;
 401         default:
 402                 VDBG("error ep type is %d", ep_type);
 403                 return;
 404         }
 405         if (zlt)
 406                 tmp |= EP_QUEUE_HEAD_ZLT_SEL;
 407         p_QH->max_pkt_length = cpu_to_le32(tmp);
 408
 409         return;
 410 }
 411
 412 /* Setup qh structure and ep register for ep0. */
 413 static void ep0_setup(struct fsl_udc *udc)
 414 {
 415         /* the intialization of an ep includes: fields in QH, Regs,
 416          * fsl_ep struct */
 417         struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
 418                         USB_MAX_CTRL_PAYLOAD, 0, 0);
 419         struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL,
 420                         USB_MAX_CTRL_PAYLOAD, 0, 0);
 421         dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL);
 422         dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL);
 423
 424         return;
 425
 426 }
 427
 428 /***********************************************************************
 429                 Endpoint Management Functions
 430 ***********************************************************************/
 431
 432 /*-------------------------------------------------------------------------
 433  * when configurations are set, or when interface settings change
 434  * for example the do_set_interface() in gadget layer,
 435  * the driver will enable or disable the relevant endpoints
 436  * ep0 doesn't use this routine. It is always enabled.
 437 -------------------------------------------------------------------------*/
 438 static int fsl_ep_enable(struct usb_ep *_ep,
 439                 const struct usb_endpoint_descriptor *desc)
 440 {
 441         struct fsl_udc *udc = NULL;
 442         struct fsl_ep *ep = NULL;
 443         unsigned short max = 0;
 444         unsigned char mult = 0, zlt;
 445         int retval = -EINVAL;
 446         unsigned long flags = 0;
 447
 448         ep = container_of(_ep, struct fsl_ep, ep);
 449
 450         /* catch various bogus parameters */
 451         if (!_ep || !desc || ep->desc
 452                         || (desc->bDescriptorType != USB_DT_ENDPOINT))
 453                 return -EINVAL;
 454
 455         udc = ep->udc;
 456
 457         if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
 458                 return -ESHUTDOWN;
 459
 460         max = le16_to_cpu(desc->wMaxPacketSize);
 461
 462         /* Disable automatic zlp generation.  Driver is reponsible to indicate
 463          * explicitly through req->req.zero.  This is needed to enable multi-td
 464          * request. */
 465         zlt = 1;
 466
 467         /* Assume the max packet size from gadget is always correct */
 468         switch (desc->bmAttributes & 0x03) {
 469         case USB_ENDPOINT_XFER_CONTROL:
 470         case USB_ENDPOINT_XFER_BULK:
 471         case USB_ENDPOINT_XFER_INT:
 472                 /* mult = 0.  Execute N Transactions as demonstrated by
 473                  * the USB variable length packet protocol where N is
 474                  * computed using the Maximum Packet Length (dQH) and
 475                  * the Total Bytes field (dTD) */
 476                 mult = 0;
 477                 break;
 478         case USB_ENDPOINT_XFER_ISOC:
 479                 /* Calculate transactions needed for high bandwidth iso */
 480                 mult = (unsigned char)(1 + ((max >> 11) & 0x03));
 481                 max = max & 0x8ff;      /* bit 0~10 */
 482                 /* 3 transactions at most */
 483                 if (mult > 3)
 484                         goto en_done;
 485                 break;
 486         default:
 487                 goto en_done;
 488         }
 489
 490         spin_lock_irqsave(&udc->lock, flags);
 491         ep->ep.maxpacket = max;
 492         ep->desc = desc;
 493         ep->stopped = 0;
 494
 495         /* Controller related setup */
 496         /* Init EPx Queue Head (Ep Capabilites field in QH
 497          * according to max, zlt, mult) */
 498         struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
 499                         (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
 500                                         ?  USB_SEND : USB_RECV),
 501                         (unsigned char) (desc->bmAttributes
 502                                         & USB_ENDPOINT_XFERTYPE_MASK),
 503                         max, zlt, mult);
 504
 505         /* Init endpoint ctrl register */
 506         dr_ep_setup((unsigned char) ep_index(ep),
 507                         (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
 508                                         ? USB_SEND : USB_RECV),
 509                         (unsigned char) (desc->bmAttributes
 510                                         & USB_ENDPOINT_XFERTYPE_MASK));
 511
 512         spin_unlock_irqrestore(&udc->lock, flags);
 513         retval = 0;
 514
 515         VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
 516                         ep->desc->bEndpointAddress & 0x0f,
 517                         (desc->bEndpointAddress & USB_DIR_IN)
 518                                 ? "in" : "out", max);
 519 en_done:
 520         return retval;
 521 }
 522
 523 /*---------------------------------------------------------------------
 524  * @ep : the ep being unconfigured. May not be ep0
 525  * Any pending and uncomplete req will complete with status (-ESHUTDOWN)
 526 *---------------------------------------------------------------------*/
 527 static int fsl_ep_disable(struct usb_ep *_ep)
 528 {
 529         struct fsl_udc *udc = NULL;
 530         struct fsl_ep *ep = NULL;
 531         unsigned long flags = 0;
 532         u32 epctrl;
 533         int ep_num;
 534
 535         ep = container_of(_ep, struct fsl_ep, ep);
 536         if (!_ep || !ep->desc) {
 537                 VDBG("%s not enabled", _ep ? ep->ep.name : NULL);
 538                 return -EINVAL;
 539         }
 540
 541         /* disable ep on controller */
 542         ep_num = ep_index(ep);
 543         epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
 544         if (ep_is_in(ep))
 545                 epctrl &= ~EPCTRL_TX_ENABLE;
 546         else
 547                 epctrl &= ~EPCTRL_RX_ENABLE;
 548         fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
 549
 550         udc = (struct fsl_udc *)ep->udc;
 551         spin_lock_irqsave(&udc->lock, flags);
 552
 553         /* nuke all pending requests (does flush) */
 554         nuke(ep, -ESHUTDOWN);
 555
 556         ep->desc = NULL;
 557         ep->stopped = 1;
 558         spin_unlock_irqrestore(&udc->lock, flags);
 559
 560         VDBG("disabled %s OK", _ep->name);
 561         return 0;
 562 }
 563
 564 /*---------------------------------------------------------------------
 565  * allocate a request object used by this endpoint
 566  * the main operation is to insert the req->queue to the eq->queue
 567  * Returns the request, or null if one could not be allocated
 568 *---------------------------------------------------------------------*/
 569 static struct usb_request *
 570 fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 571 {
 572         struct fsl_req *req = NULL;
 573
 574         req = kzalloc(sizeof *req, gfp_flags);
 575         if (!req)
 576                 return NULL;
 577
 578         req->req.dma = DMA_ADDR_INVALID;
 579         INIT_LIST_HEAD(&req->queue);
 580
 581         return &req->req;
 582 }
 583
 584 static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
 585 {
 586         struct fsl_req *req = NULL;
 587
 588         req = container_of(_req, struct fsl_req, req);
 589
 590         if (_req)
 591                 kfree(req);
 592 }
 593
 594 /*-------------------------------------------------------------------------*/
 595 static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 596 {
 597         int i = ep_index(ep) * 2 + ep_is_in(ep);
 598         u32 temp, bitmask, tmp_stat;
 599         struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
 600
 601         /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
 602         VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
 603
 604         bitmask = ep_is_in(ep)
 605                 ? (1 << (ep_index(ep) + 16))
 606                 : (1 << (ep_index(ep)));
 607
 608         /* check if the pipe is empty */
 609         if (!(list_empty(&ep->queue))) {
 610                 /* Add td to the end */
 611                 struct fsl_req *lastreq;
 612                 lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
 613                 lastreq->tail->next_td_ptr =
 614                         cpu_to_le32(req->head->td_dma & DTD_ADDR_MASK);
 615                 /* Read prime bit, if 1 goto done */
 616                 if (fsl_readl(&dr_regs->endpointprime) & bitmask)
 617                         goto out;
 618
 619                 do {
 620                         /* Set ATDTW bit in USBCMD */
 621                         temp = fsl_readl(&dr_regs->usbcmd);
 622                         fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd);
 623
 624                         /* Read correct status bit */
 625                         tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask;
 626
 627                 } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW));
 628
 629                 /* Write ATDTW bit to 0 */
 630                 temp = fsl_readl(&dr_regs->usbcmd);
 631                 fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
 632
 633                 if (tmp_stat)
 634                         goto out;
 635         }
 636
 637         /* Write dQH next pointer and terminate bit to 0 */
 638         temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
 639         dQH->next_dtd_ptr = cpu_to_le32(temp);
 640
 641         /* Clear active and halt bit */
 642         temp = cpu_to_le32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
 643                         | EP_QUEUE_HEAD_STATUS_HALT));
 644         dQH->size_ioc_int_sts &= temp;
 645
 646         /* Ensure that updates to the QH will occure before priming. */
 647         wmb();
 648
 649         /* Prime endpoint by writing 1 to ENDPTPRIME */
 650         temp = ep_is_in(ep)
 651                 ? (1 << (ep_index(ep) + 16))
 652                 : (1 << (ep_index(ep)));
 653         fsl_writel(temp, &dr_regs->endpointprime);
 654 out:
 655         return;
 656 }
 657
 658 /* Fill in the dTD structure
 659  * @req: request that the transfer belongs to
 660  * @length: return actually data length of the dTD
 661  * @dma: return dma address of the dTD
 662  * @is_last: return flag if it is the last dTD of the request
 663  * return: pointer to the built dTD */
 664 static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 665                 dma_addr_t *dma, int *is_last)
 666 {
 667         u32 swap_temp;
 668         struct ep_td_struct *dtd;
 669
 670         /* how big will this transfer be? */
 671         *length = min(req->req.length - req->req.actual,
 672                         (unsigned)EP_MAX_LENGTH_TRANSFER);
 673
 674         dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
 675         if (dtd == NULL)
 676                 return dtd;
 677
 678         dtd->td_dma = *dma;
 679         /* Clear reserved field */
 680         swap_temp = cpu_to_le32(dtd->size_ioc_sts);
 681         swap_temp &= ~DTD_RESERVED_FIELDS;
 682         dtd->size_ioc_sts = cpu_to_le32(swap_temp);
 683
 684         /* Init all of buffer page pointers */
 685         swap_temp = (u32) (req->req.dma + req->req.actual);
 686         dtd->buff_ptr0 = cpu_to_le32(swap_temp);
 687         dtd->buff_ptr1 = cpu_to_le32(swap_temp + 0x1000);
 688         dtd->buff_ptr2 = cpu_to_le32(swap_temp + 0x2000);
 689         dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000);
 690         dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000);
 691
 692         req->req.actual += *length;
 693
 694         /* zlp is needed if req->req.zero is set */
 695         if (req->req.zero) {
 696                 if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
 697                         *is_last = 1;
 698                 else
 699                         *is_last = 0;
 700         } else if (req->req.length == req->req.actual)
 701                 *is_last = 1;
 702         else
 703                 *is_last = 0;
 704
 705         if ((*is_last) == 0)
 706                 VDBG("multi-dtd request!");
 707         /* Fill in the transfer size; set active bit */
 708         swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
 709
 710         /* Enable interrupt for the last dtd of a request */
 711         if (*is_last && !req->req.no_interrupt)
 712                 swap_temp |= DTD_IOC;
 713
 714         dtd->size_ioc_sts = cpu_to_le32(swap_temp);
 715
 716         mb();
 717
 718         VDBG("length = %d address= 0x%x", *length, (int)*dma);
 719
 720         return dtd;
 721 }
 722
 723 /* Generate dtd chain for a request */
 724 static int fsl_req_to_dtd(struct fsl_req *req)
 725 {
 726         unsigned        count;
 727         int             is_last;
 728         int             is_first =1;
 729         struct ep_td_struct     *last_dtd = NULL, *dtd;
 730         dma_addr_t dma;
 731
 732         do {
 733                 dtd = fsl_build_dtd(req, &count, &dma, &is_last);
 734                 if (dtd == NULL)
 735                         return -ENOMEM;
 736
 737                 if (is_first) {
 738                         is_first = 0;
 739                         req->head = dtd;
 740                 } else {
 741                         last_dtd->next_td_ptr = cpu_to_le32(dma);
 742                         last_dtd->next_td_virt = dtd;
 743                 }
 744                 last_dtd = dtd;
 745
 746                 req->dtd_count++;
 747         } while (!is_last);
 748
 749         dtd->next_td_ptr = cpu_to_le32(DTD_NEXT_TERMINATE);
 750
 751         req->tail = dtd;
 752
 753         return 0;
 754 }
 755
 756 /* queues (submits) an I/O request to an endpoint */
 757 static int
 758 fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 759 {
 760         struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
 761         struct fsl_req *req = container_of(_req, struct fsl_req, req);
 762         struct fsl_udc *udc;
 763         unsigned long flags;
 764         int is_iso = 0;
 765
 766         /* catch various bogus parameters */
 767         if (!_req || !req->req.complete || !req->req.buf
 768                         || !list_empty(&req->queue)) {
 769                 VDBG("%s, bad params", __func__);
 770                 return -EINVAL;
 771         }
 772         if (unlikely(!_ep || !ep->desc)) {
 773                 VDBG("%s, bad ep", __func__);
 774                 return -EINVAL;
 775         }
 776         if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 777                 if (req->req.length > ep->ep.maxpacket)
 778                         return -EMSGSIZE;
 779                 is_iso = 1;
 780         }
 781
 782         udc = ep->udc;
 783         if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
 784                 return -ESHUTDOWN;
 785
 786         req->ep = ep;
 787
 788         /* map virtual address to hardware */
 789         if (req->req.dma == DMA_ADDR_INVALID) {
 790                 req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
 791                                         req->req.buf,
 792                                         req->req.length, ep_is_in(ep)
 793                                                 ? DMA_TO_DEVICE
 794                                                 : DMA_FROM_DEVICE);
 795                 req->mapped = 1;
 796         } else {
 797                 dma_sync_single_for_device(ep->udc->gadget.dev.parent,
 798                                         req->req.dma, req->req.length,
 799                                         ep_is_in(ep)
 800                                                 ? DMA_TO_DEVICE
 801                                                 : DMA_FROM_DEVICE);
 802                 req->mapped = 0;
 803         }
 804
 805         req->req.status = -EINPROGRESS;
 806         req->req.actual = 0;
 807         req->dtd_count = 0;
 808
 809         spin_lock_irqsave(&udc->lock, flags);
 810
 811         /* build dtds and push them to device queue */
 812         if (!fsl_req_to_dtd(req)) {
 813                 fsl_queue_td(ep, req);
 814         } else {
 815                 spin_unlock_irqrestore(&udc->lock, flags);
 816                 return -ENOMEM;
 817         }
 818
 819         /* Update ep0 state */
 820         if ((ep_index(ep) == 0))
 821                 udc->ep0_state = DATA_STATE_XMIT;
 822
 823         /* irq handler advances the queue */
 824         if (req != NULL)
 825                 list_add_tail(&req->queue, &ep->queue);
 826         spin_unlock_irqrestore(&udc->lock, flags);
 827
 828         return 0;
 829 }
 830
 831 /* dequeues (cancels, unlinks) an I/O request from an endpoint */
 832 static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 833 {
 834         struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
 835         struct fsl_req *req;
 836         unsigned long flags;
 837         int ep_num, stopped, ret = 0;
 838         u32 epctrl;
 839
 840         if (!_ep || !_req)
 841                 return -EINVAL;
 842
 843         spin_lock_irqsave(&ep->udc->lock, flags);
 844         stopped = ep->stopped;
 845
 846         /* Stop the ep before we deal with the queue */
 847         ep->stopped = 1;
 848         ep_num = ep_index(ep);
 849         epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
 850         if (ep_is_in(ep))
 851                 epctrl &= ~EPCTRL_TX_ENABLE;
 852         else
 853                 epctrl &= ~EPCTRL_RX_ENABLE;
 854         fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
 855
 856         /* make sure it's actually queued on this endpoint */
 857         list_for_each_entry(req, &ep->queue, queue) {
 858                 if (&req->req == _req)
 859                         break;
 860         }
 861         if (&req->req != _req) {
 862                 ret = -EINVAL;
 863                 goto out;
 864         }
 865
 866         /* The request is in progress, or completed but not dequeued */
 867         if (ep->queue.next == &req->queue) {
 868                 _req->status = -ECONNRESET;
 869                 fsl_ep_fifo_flush(_ep); /* flush current transfer */
 870
 871                 /* The request isn't the last request in this ep queue */
 872                 if (req->queue.next != &ep->queue) {
 873                         struct ep_queue_head *qh;
 874                         struct fsl_req *next_req;
 875
 876                         qh = ep->qh;
 877                         next_req = list_entry(req->queue.next, struct fsl_req,
 878                                         queue);
 879
 880                         /* Point the QH to the first TD of next request */
 881                         fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
 882                 }
 883
 884                 /* The request hasn't been processed, patch up the TD chain */
 885         } else {
 886                 struct fsl_req *prev_req;
 887
 888                 prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
 889                 fsl_writel(fsl_readl(&req->tail->next_td_ptr),
 890                                 &prev_req->tail->next_td_ptr);
 891
 892         }
 893
 894         done(ep, req, -ECONNRESET);
 895
 896         /* Enable EP */
 897 out:    epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
 898         if (ep_is_in(ep))
 899                 epctrl |= EPCTRL_TX_ENABLE;
 900         else
 901                 epctrl |= EPCTRL_RX_ENABLE;
 902         fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
 903         ep->stopped = stopped;
 904
 905         spin_unlock_irqrestore(&ep->udc->lock, flags);
 906         return ret;
 907 }
 908
 909 /*-------------------------------------------------------------------------*/
 910
 911 /*-----------------------------------------------------------------
 912  * modify the endpoint halt feature
 913  * @ep: the non-isochronous endpoint being stalled
 914  * @value: 1--set halt  0--clear halt
 915  * Returns zero, or a negative error code.
 916 *----------------------------------------------------------------*/
 917 static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
 918 {
 919         struct fsl_ep *ep = NULL;
 920         unsigned long flags = 0;
 921         int status = -EOPNOTSUPP;       /* operation not supported */
 922         unsigned char ep_dir = 0, ep_num = 0;
 923         struct fsl_udc *udc = NULL;
 924
 925         ep = container_of(_ep, struct fsl_ep, ep);
 926         udc = ep->udc;
 927         if (!_ep || !ep->desc) {
 928                 status = -EINVAL;
 929                 goto out;
 930         }
 931
 932         if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 933                 status = -EOPNOTSUPP;
 934                 goto out;
 935         }
 936
 937         /* Attempt to halt IN ep will fail if any transfer requests
 938          * are still queue */
 939         if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
 940                 status = -EAGAIN;
 941                 goto out;
 942         }
 943
 944         status = 0;
 945         ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
 946         ep_num = (unsigned char)(ep_index(ep));
 947         spin_lock_irqsave(&ep->udc->lock, flags);
 948         dr_ep_change_stall(ep_num, ep_dir, value);
 949         spin_unlock_irqrestore(&ep->udc->lock, flags);
 950
 951         if (ep_index(ep) == 0) {
 952                 udc->ep0_state = WAIT_FOR_SETUP;
 953                 udc->ep0_dir = 0;
 954         }
 955 out:
 956         VDBG(" %s %s halt stat %d", ep->ep.name,
 957                         value ?  "set" : "clear", status);
 958
 959         return status;
 960 }
 961
 962 static void fsl_ep_fifo_flush(struct usb_ep *_ep)
 963 {
 964         struct fsl_ep *ep;
 965         int ep_num, ep_dir;
 966         u32 bits;
 967         unsigned long timeout;
 968 #define FSL_UDC_FLUSH_TIMEOUT 1000
 969
 970         if (!_ep) {
 971                 return;
 972         } else {
 973                 ep = container_of(_ep, struct fsl_ep, ep);
 974                 if (!ep->desc)
 975                         return;
 976         }
 977         ep_num = ep_index(ep);
 978         ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
 979
 980         if (ep_num == 0)
 981                 bits = (1 << 16) | 1;
 982         else if (ep_dir == USB_SEND)
 983                 bits = 1 << (16 + ep_num);
 984         else
 985                 bits = 1 << ep_num;
 986
 987         timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT;
 988         do {
 989                 fsl_writel(bits, &dr_regs->endptflush);
 990
 991                 /* Wait until flush complete */
 992                 while (fsl_readl(&dr_regs->endptflush)) {
 993                         if (time_after(jiffies, timeout)) {
 994                                 ERR("ep flush timeout\n");
 995                                 return;
 996                         }
 997                         cpu_relax();
 998                 }
 999                 /* See if we need to flush again */
1000         } while (fsl_readl(&dr_regs->endptstatus) & bits);
1001 }
1002
1003 static struct usb_ep_ops fsl_ep_ops = {
1004         .enable = fsl_ep_enable,
1005         .disable = fsl_ep_disable,
1006
1007         .alloc_request = fsl_alloc_request,
1008         .free_request = fsl_free_request,
1009
1010         .queue = fsl_ep_queue,
1011         .dequeue = fsl_ep_dequeue,
1012
1013         .set_halt = fsl_ep_set_halt,
1014         .fifo_flush = fsl_ep_fifo_flush,        /* flush fifo */
1015 };
1016
1017 /*-------------------------------------------------------------------------
1018                 Gadget Driver Layer Operations
1019 -------------------------------------------------------------------------*/
1020
1021 /*----------------------------------------------------------------------
1022  * Get the current frame number (from DR frame_index Reg )
1023  *----------------------------------------------------------------------*/
1024 static int fsl_get_frame(struct usb_gadget *gadget)
1025 {
1026         return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS);
1027 }
1028
1029 /*-----------------------------------------------------------------------
1030  * Tries to wake up the host connected to this gadget
1031  -----------------------------------------------------------------------*/
1032 static int fsl_wakeup(struct usb_gadget *gadget)
1033 {
1034         struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget);
1035         u32 portsc;
1036
1037         /* Remote wakeup feature not enabled by host */
1038         if (!udc->remote_wakeup)
1039                 return -ENOTSUPP;
1040
1041         portsc = fsl_readl(&dr_regs->portsc1);
1042         /* not suspended? */
1043         if (!(portsc & PORTSCX_PORT_SUSPEND))
1044                 return 0;
1045         /* trigger force resume */
1046         portsc |= PORTSCX_PORT_FORCE_RESUME;
1047         fsl_writel(portsc, &dr_regs->portsc1);
1048         return 0;
1049 }
1050
1051 static int can_pullup(struct fsl_udc *udc)
1052 {
1053         return udc->driver && udc->softconnect && udc->vbus_active;
1054 }
1055
1056 /* Notify controller that VBUS is powered, Called by whatever
1057    detects VBUS sessions */
1058 static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
1059 {
1060         struct fsl_udc  *udc;
1061         unsigned long   flags;
1062
1063         udc = container_of(gadget, struct fsl_udc, gadget);
1064         spin_lock_irqsave(&udc->lock, flags);
1065         VDBG("VBUS %s", is_active ? "on" : "off");
1066         udc->vbus_active = (is_active != 0);
1067         if (can_pullup(udc))
1068                 fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
1069                                 &dr_regs->usbcmd);
1070         else
1071                 fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
1072                                 &dr_regs->usbcmd);
1073         spin_unlock_irqrestore(&udc->lock, flags);
1074         return 0;
1075 }
1076
1077 /* constrain controller's VBUS power usage
1078  * This call is used by gadget drivers during SET_CONFIGURATION calls,
1079  * reporting how much power the device may consume.  For example, this
1080  * could affect how quickly batteries are recharged.
1081  *
1082  * Returns zero on success, else negative errno.
1083  */
1084 static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
1085 {
1086         struct fsl_udc *udc;
1087
1088         udc = container_of(gadget, struct fsl_udc, gadget);
1089         if (udc->transceiver)
1090                 return otg_set_power(udc->transceiver, mA);
1091         return -ENOTSUPP;
1092 }
1093
1094 /* Change Data+ pullup status
1095  * this func is used by usb_gadget_connect/disconnet
1096  */
1097 static int fsl_pullup(struct usb_gadget *gadget, int is_on)
1098 {
1099         struct fsl_udc *udc;
1100
1101         udc = container_of(gadget, struct fsl_udc, gadget);
1102         udc->softconnect = (is_on != 0);
1103         if (can_pullup(udc))
1104                 fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
1105                                 &dr_regs->usbcmd);
1106         else
1107                 fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
1108                                 &dr_regs->usbcmd);
1109
1110         return 0;
1111 }
1112
1113 /* defined in gadget.h */
1114 static struct usb_gadget_ops fsl_gadget_ops = {
1115         .get_frame = fsl_get_frame,
1116         .wakeup = fsl_wakeup,
1117 /*      .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */
1118         .vbus_session = fsl_vbus_session,
1119         .vbus_draw = fsl_vbus_draw,
1120         .pullup = fsl_pullup,
1121 };
1122
1123 /* Set protocol stall on ep0, protocol stall will automatically be cleared
1124    on new transaction */
1125 static void ep0stall(struct fsl_udc *udc)
1126 {
1127         u32 tmp;
1128
1129         /* must set tx and rx to stall at the same time */
1130         tmp = fsl_readl(&dr_regs->endptctrl[0]);
1131         tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL;
1132         fsl_writel(tmp, &dr_regs->endptctrl[0]);
1133         udc->ep0_state = WAIT_FOR_SETUP;
1134         udc->ep0_dir = 0;
1135 }
1136
1137 /* Prime a status phase for ep0 */
1138 static int ep0_prime_status(struct fsl_udc *udc, int direction)
1139 {
1140         struct fsl_req *req = udc->status_req;
1141         struct fsl_ep *ep;
1142
1143         if (direction == EP_DIR_IN)
1144                 udc->ep0_dir = USB_DIR_IN;
1145         else
1146                 udc->ep0_dir = USB_DIR_OUT;
1147
1148         ep = &udc->eps[0];
1149         udc->ep0_state = WAIT_FOR_OUT_STATUS;
1150
1151         req->ep = ep;
1152         req->req.length = 0;
1153         req->req.status = -EINPROGRESS;
1154         req->req.actual = 0;
1155         req->req.complete = NULL;
1156         req->dtd_count = 0;
1157
1158         if (fsl_req_to_dtd(req) == 0)
1159                 fsl_queue_td(ep, req);
1160         else
1161                 return -ENOMEM;
1162
1163         list_add_tail(&req->queue, &ep->queue);
1164
1165         return 0;
1166 }
1167
1168 static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
1169 {
1170         struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
1171
1172         if (ep->name)
1173                 nuke(ep, -ESHUTDOWN);
1174 }
1175
1176 /*
1177  * ch9 Set address
1178  */
1179 static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length)
1180 {
1181         /* Save the new address to device struct */
1182         udc->device_address = (u8) value;
1183         /* Update usb state */
1184         udc->usb_state = USB_STATE_ADDRESS;
1185         /* Status phase */
1186         if (ep0_prime_status(udc, EP_DIR_IN))
1187                 ep0stall(udc);
1188 }
1189
1190 /*
1191  * ch9 Get status
1192  */
1193 static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
1194                 u16 index, u16 length)
1195 {
1196         u16 tmp = 0;            /* Status, cpu endian */
1197         struct fsl_req *req;
1198         struct fsl_ep *ep;
1199
1200         ep = &udc->eps[0];
1201
1202         if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
1203                 /* Get device status */
1204                 tmp = 1 << USB_DEVICE_SELF_POWERED;
1205                 tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
1206         } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
1207                 /* Get interface status */
1208                 /* We don't have interface information in udc driver */
1209                 tmp = 0;
1210         } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
1211                 /* Get endpoint status */
1212                 struct fsl_ep *target_ep;
1213
1214                 target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
1215
1216                 /* stall if endpoint doesn't exist */
1217                 if (!target_ep->desc)
1218                         goto stall;
1219                 tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
1220                                 << USB_ENDPOINT_HALT;
1221         }
1222
1223         udc->ep0_dir = USB_DIR_IN;
1224         /* Borrow the per device status_req */
1225         req = udc->status_req;
1226         /* Fill in the reqest structure */
1227         *((u16 *) req->req.buf) = cpu_to_le16(tmp);
1228         req->ep = ep;
1229         req->req.length = 2;
1230         req->req.status = -EINPROGRESS;
1231         req->req.actual = 0;
1232         req->req.complete = NULL;
1233         req->dtd_count = 0;
1234
1235         /* prime the data phase */
1236         if ((fsl_req_to_dtd(req) == 0))
1237                 fsl_queue_td(ep, req);
1238         else                    /* no mem */
1239                 goto stall;
1240
1241         list_add_tail(&req->queue, &ep->queue);
1242         udc->ep0_state = DATA_STATE_XMIT;
1243         return;
1244 stall:
1245         ep0stall(udc);
1246 }
1247
1248 static void setup_received_irq(struct fsl_udc *udc,
1249                 struct usb_ctrlrequest *setup)
1250 {
1251         u16 wValue = le16_to_cpu(setup->wValue);
1252         u16 wIndex = le16_to_cpu(setup->wIndex);
1253         u16 wLength = le16_to_cpu(setup->wLength);
1254
1255         udc_reset_ep_queue(udc, 0);
1256
1257         /* We process some stardard setup requests here */
1258         switch (setup->bRequest) {
1259         case USB_REQ_GET_STATUS:
1260                 /* Data+Status phase from udc */
1261                 if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
1262                                         != (USB_DIR_IN | USB_TYPE_STANDARD))
1263                         break;
1264                 ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength);
1265                 return;
1266
1267         case USB_REQ_SET_ADDRESS:
1268                 /* Status phase from udc */
1269                 if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
1270                                                 | USB_RECIP_DEVICE))
1271                         break;
1272                 ch9setaddress(udc, wValue, wIndex, wLength);
1273                 return;
1274
1275         case USB_REQ_CLEAR_FEATURE:
1276         case USB_REQ_SET_FEATURE:
1277                 /* Status phase from udc */
1278         {
1279                 int rc = -EOPNOTSUPP;
1280
1281                 if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
1282                                 == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
1283                         int pipe = get_pipe_by_windex(wIndex);
1284                         struct fsl_ep *ep;
1285
1286                         if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
1287                                 break;
1288                         ep = get_ep_by_pipe(udc, pipe);
1289
1290                         spin_unlock(&udc->lock);
1291                         rc = fsl_ep_set_halt(&ep->ep,
1292                                         (setup->bRequest == USB_REQ_SET_FEATURE)
1293                                                 ? 1 : 0);
1294                         spin_lock(&udc->lock);
1295
1296                 } else if ((setup->bRequestType & (USB_RECIP_MASK
1297                                 | USB_TYPE_MASK)) == (USB_RECIP_DEVICE
1298                                 | USB_TYPE_STANDARD)) {
1299                         /* Note: The driver has not include OTG support yet.
1300                          * This will be set when OTG support is added */
1301                         if (!gadget_is_otg(&udc->gadget))
1302                                 break;
1303                         else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
1304                                 udc->gadget.b_hnp_enable = 1;
1305                         else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
1306                                 udc->gadget.a_hnp_support = 1;
1307                         else if (setup->bRequest ==
1308                                         USB_DEVICE_A_ALT_HNP_SUPPORT)
1309                                 udc->gadget.a_alt_hnp_support = 1;
1310                         else
1311                                 break;
1312                         rc = 0;
1313                 } else
1314                         break;
1315
1316                 if (rc == 0) {
1317                         if (ep0_prime_status(udc, EP_DIR_IN))
1318                                 ep0stall(udc);
1319                 }
1320                 return;
1321         }
1322
1323         default:
1324                 break;
1325         }
1326
1327         /* Requests handled by gadget */
1328         if (wLength) {
1329                 /* Data phase from gadget, status phase from udc */
1330                 udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
1331                                 ?  USB_DIR_IN : USB_DIR_OUT;
1332                 spin_unlock(&udc->lock);
1333                 if (udc->driver->setup(&udc->gadget,
1334                                 &udc->local_setup_buff) < 0)
1335                         ep0stall(udc);
1336                 spin_lock(&udc->lock);
1337                 udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
1338                                 ?  DATA_STATE_XMIT : DATA_STATE_RECV;
1339         } else {
1340                 /* No data phase, IN status from gadget */
1341                 udc->ep0_dir = USB_DIR_IN;
1342                 spin_unlock(&udc->lock);
1343                 if (udc->driver->setup(&udc->gadget,
1344                                 &udc->local_setup_buff) < 0)
1345                         ep0stall(udc);
1346                 spin_lock(&udc->lock);
1347                 udc->ep0_state = WAIT_FOR_OUT_STATUS;
1348         }
1349 }
1350
1351 /* Process request for Data or Status phase of ep0
1352  * prime status phase if needed */
1353 static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
1354                 struct fsl_req *req)
1355 {
1356         if (udc->usb_state == USB_STATE_ADDRESS) {
1357                 /* Set the new address */
1358                 u32 new_address = (u32) udc->device_address;
1359                 fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS,
1360                                 &dr_regs->deviceaddr);
1361         }
1362
1363         done(ep0, req, 0);
1364
1365         switch (udc->ep0_state) {
1366         case DATA_STATE_XMIT:
1367                 /* receive status phase */
1368                 if (ep0_prime_status(udc, EP_DIR_OUT))
1369                         ep0stall(udc);
1370                 break;
1371         case DATA_STATE_RECV:
1372                 /* send status phase */
1373                 if (ep0_prime_status(udc, EP_DIR_IN))
1374                         ep0stall(udc);
1375                 break;
1376         case WAIT_FOR_OUT_STATUS:
1377                 udc->ep0_state = WAIT_FOR_SETUP;
1378                 break;
1379         case WAIT_FOR_SETUP:
1380                 ERR("Unexpect ep0 packets\n");
1381                 break;
1382         default:
1383                 ep0stall(udc);
1384                 break;
1385         }
1386 }
1387
1388 /* Tripwire mechanism to ensure a setup packet payload is extracted without
1389  * being corrupted by another incoming setup packet */
1390 static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr)
1391 {
1392         u32 temp;
1393         struct ep_queue_head *qh;
1394
1395         qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
1396
1397         /* Clear bit in ENDPTSETUPSTAT */
1398         temp = fsl_readl(&dr_regs->endptsetupstat);
1399         fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat);
1400
1401         /* while a hazard exists when setup package arrives */
1402         do {
1403                 /* Set Setup Tripwire */
1404                 temp = fsl_readl(&dr_regs->usbcmd);
1405                 fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
1406
1407                 /* Copy the setup packet to local buffer */
1408                 memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
1409         } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
1410
1411         /* Clear Setup Tripwire */
1412         temp = fsl_readl(&dr_regs->usbcmd);
1413         fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd);
1414 }
1415
1416 /* process-ep_req(): free the completed Tds for this req */
1417 static int process_ep_req(struct fsl_udc *udc, int pipe,
1418                 struct fsl_req *curr_req)
1419 {
1420         struct ep_td_struct *curr_td;
1421         int     td_complete, actual, remaining_length, j, tmp;
1422         int     status = 0;
1423         int     errors = 0;
1424         struct  ep_queue_head *curr_qh = &udc->ep_qh[pipe];
1425         int direction = pipe % 2;
1426
1427         curr_td = curr_req->head;
1428         td_complete = 0;
1429         actual = curr_req->req.length;
1430
1431         for (j = 0; j < curr_req->dtd_count; j++) {
1432                 remaining_length = (le32_to_cpu(curr_td->size_ioc_sts)
1433                                         & DTD_PACKET_SIZE)
1434                                 >> DTD_LENGTH_BIT_POS;
1435                 actual -= remaining_length;
1436
1437                 if ((errors = le32_to_cpu(curr_td->size_ioc_sts) &
1438                                                 DTD_ERROR_MASK)) {
1439                         if (errors & DTD_STATUS_HALTED) {
1440                                 ERR("dTD error %08x QH=%d\n", errors, pipe);
1441                                 /* Clear the errors and Halt condition */
1442                                 tmp = le32_to_cpu(curr_qh->size_ioc_int_sts);
1443                                 tmp &= ~errors;
1444                                 curr_qh->size_ioc_int_sts = cpu_to_le32(tmp);
1445                                 status = -EPIPE;
1446                                 /* FIXME: continue with next queued TD? */
1447
1448                                 break;
1449                         }
1450                         if (errors & DTD_STATUS_DATA_BUFF_ERR) {
1451                                 VDBG("Transfer overflow");
1452                                 status = -EPROTO;
1453                                 break;
1454                         } else if (errors & DTD_STATUS_TRANSACTION_ERR) {
1455                                 VDBG("ISO error");
1456                                 status = -EILSEQ;
1457                                 break;
1458                         } else
1459                                 ERR("Unknown error has occured (0x%x)!\n",
1460                                         errors);
1461
1462                 } else if (le32_to_cpu(curr_td->size_ioc_sts)
1463                                 & DTD_STATUS_ACTIVE) {
1464                         VDBG("Request not complete");
1465                         status = REQ_UNCOMPLETE;
1466                         return status;
1467                 } else if (remaining_length) {
1468                         if (direction) {
1469                                 VDBG("Transmit dTD remaining length not zero");
1470                                 status = -EPROTO;
1471                                 break;
1472                         } else {
1473                                 td_complete++;
1474                                 break;
1475                         }
1476                 } else {
1477                         td_complete++;
1478                         VDBG("dTD transmitted successful");
1479                 }
1480
1481                 if (j != curr_req->dtd_count - 1)
1482                         curr_td = (struct ep_td_struct *)curr_td->next_td_virt;
1483         }
1484
1485         if (status)
1486                 return status;
1487
1488         curr_req->req.actual = actual;
1489
1490         return 0;
1491 }
1492
1493 /* Process a DTD completion interrupt */
1494 static void dtd_complete_irq(struct fsl_udc *udc)
1495 {
1496         u32 bit_pos;
1497         int i, ep_num, direction, bit_mask, status;
1498         struct fsl_ep *curr_ep;
1499         struct fsl_req *curr_req, *temp_req;
1500
1501         /* Clear the bits in the register */
1502         bit_pos = fsl_readl(&dr_regs->endptcomplete);
1503         fsl_writel(bit_pos, &dr_regs->endptcomplete);
1504
1505         if (!bit_pos)
1506                 return;
1507
1508         for (i = 0; i < udc->max_ep * 2; i++) {
1509                 ep_num = i >> 1;
1510                 direction = i % 2;
1511
1512                 bit_mask = 1 << (ep_num + 16 * direction);
1513
1514                 if (!(bit_pos & bit_mask))
1515                         continue;
1516
1517                 curr_ep = get_ep_by_pipe(udc, i);
1518
1519                 /* If the ep is configured */
1520                 if (curr_ep->name == NULL) {
1521                         WARNING("Invalid EP?");
1522                         continue;
1523                 }
1524
1525                 /* process the req queue until an uncomplete request */
1526                 list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue,
1527                                 queue) {
1528                         status = process_ep_req(udc, i, curr_req);
1529
1530                         VDBG("status of process_ep_req= %d, ep = %d",
1531                                         status, ep_num);
1532                         if (status == REQ_UNCOMPLETE)
1533                                 break;
1534                         /* write back status to req */
1535                         curr_req->req.status = status;
1536
1537                         if (ep_num == 0) {
1538                                 ep0_req_complete(udc, curr_ep, curr_req);
1539                                 break;
1540                         } else
1541                                 done(curr_ep, curr_req, status);
1542                 }
1543         }
1544 }
1545
1546 /* Process a port change interrupt */
1547 static void port_change_irq(struct fsl_udc *udc)
1548 {
1549         u32 speed;
1550
1551         /* Bus resetting is finished */
1552         if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
1553                 /* Get the speed */
1554                 speed = (fsl_readl(&dr_regs->portsc1)
1555                                 & PORTSCX_PORT_SPEED_MASK);
1556                 switch (speed) {
1557                 case PORTSCX_PORT_SPEED_HIGH:
1558                         udc->gadget.speed = USB_SPEED_HIGH;
1559                         break;
1560                 case PORTSCX_PORT_SPEED_FULL:
1561                         udc->gadget.speed = USB_SPEED_FULL;
1562                         break;
1563                 case PORTSCX_PORT_SPEED_LOW:
1564                         udc->gadget.speed = USB_SPEED_LOW;
1565                         break;
1566                 default:
1567                         udc->gadget.speed = USB_SPEED_UNKNOWN;
1568                         break;
1569                 }
1570         }
1571
1572         /* Update USB state */
1573         if (!udc->resume_state)
1574                 udc->usb_state = USB_STATE_DEFAULT;
1575 }
1576
1577 /* Process suspend interrupt */
1578 static void suspend_irq(struct fsl_udc *udc)
1579 {
1580         udc->resume_state = udc->usb_state;
1581         udc->usb_state = USB_STATE_SUSPENDED;
1582
1583         /* report suspend to the driver, serial.c does not support this */
1584         if (udc->driver->suspend)
1585                 udc->driver->suspend(&udc->gadget);
1586 }
1587
1588 static void bus_resume(struct fsl_udc *udc)
1589 {
1590         udc->usb_state = udc->resume_state;
1591         udc->resume_state = 0;
1592
1593         /* report resume to the driver, serial.c does not support this */
1594         if (udc->driver->resume)
1595                 udc->driver->resume(&udc->gadget);
1596 }
1597
1598 /* Clear up all ep queues */
1599 static int reset_queues(struct fsl_udc *udc)
1600 {
1601         u8 pipe;
1602
1603         for (pipe = 0; pipe < udc->max_pipes; pipe++)
1604                 udc_reset_ep_queue(udc, pipe);
1605
1606         /* report disconnect; the driver is already quiesced */
1607         spin_unlock(&udc->lock);
1608         udc->driver->disconnect(&udc->gadget);
1609         spin_lock(&udc->lock);
1610
1611         return 0;
1612 }
1613
1614 /* Process reset interrupt */
1615 static void reset_irq(struct fsl_udc *udc)
1616 {
1617         u32 temp;
1618         unsigned long timeout;
1619
1620         /* Clear the device address */
1621         temp = fsl_readl(&dr_regs->deviceaddr);
1622         fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr);
1623
1624         udc->device_address = 0;
1625
1626         /* Clear usb state */
1627         udc->resume_state = 0;
1628         udc->ep0_dir = 0;
1629         udc->ep0_state = WAIT_FOR_SETUP;
1630         udc->remote_wakeup = 0; /* default to 0 on reset */
1631         udc->gadget.b_hnp_enable = 0;
1632         udc->gadget.a_hnp_support = 0;
1633         udc->gadget.a_alt_hnp_support = 0;
1634
1635         /* Clear all the setup token semaphores */
1636         temp = fsl_readl(&dr_regs->endptsetupstat);
1637         fsl_writel(temp, &dr_regs->endptsetupstat);
1638
1639         /* Clear all the endpoint complete status bits */
1640         temp = fsl_readl(&dr_regs->endptcomplete);
1641         fsl_writel(temp, &dr_regs->endptcomplete);
1642
1643         timeout = jiffies + 100;
1644         while (fsl_readl(&dr_regs->endpointprime)) {
1645                 /* Wait until all endptprime bits cleared */
1646                 if (time_after(jiffies, timeout)) {
1647                         ERR("Timeout for reset\n");
1648                         break;
1649                 }
1650                 cpu_relax();
1651         }
1652
1653         /* Write 1s to the flush register */
1654         fsl_writel(0xffffffff, &dr_regs->endptflush);
1655
1656         if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
1657                 VDBG("Bus reset");
1658                 /* Reset all the queues, include XD, dTD, EP queue
1659                  * head and TR Queue */
1660                 reset_queues(udc);
1661                 udc->usb_state = USB_STATE_DEFAULT;
1662         } else {
1663                 VDBG("Controller reset");
1664                 /* initialize usb hw reg except for regs for EP, not
1665                  * touch usbintr reg */
1666                 dr_controller_setup(udc);
1667
1668                 /* Reset all internal used Queues */
1669                 reset_queues(udc);
1670
1671                 ep0_setup(udc);
1672
1673                 /* Enable DR IRQ reg, Set Run bit, change udc state */
1674                 dr_controller_run(udc);
1675                 udc->usb_state = USB_STATE_ATTACHED;
1676         }
1677 }
1678
1679 /*
1680  * USB device controller interrupt handler
1681  */
1682 static irqreturn_t fsl_udc_irq(int irq, void *_udc)
1683 {
1684         struct fsl_udc *udc = _udc;
1685         u32 irq_src;
1686         irqreturn_t status = IRQ_NONE;
1687         unsigned long flags;
1688
1689         /* Disable ISR for OTG host mode */
1690         if (udc->stopped)
1691                 return IRQ_NONE;
1692         spin_lock_irqsave(&udc->lock, flags);
1693         irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr);
1694         /* Clear notification bits */
1695         fsl_writel(irq_src, &dr_regs->usbsts);
1696
1697         /* VDBG("irq_src [0x%8x]", irq_src); */
1698
1699         /* Need to resume? */
1700         if (udc->usb_state == USB_STATE_SUSPENDED)
1701                 if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0)
1702                         bus_resume(udc);
1703
1704         /* USB Interrupt */
1705         if (irq_src & USB_STS_INT) {
1706                 VDBG("Packet int");
1707                 /* Setup package, we only support ep0 as control ep */
1708                 if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
1709                         tripwire_handler(udc, 0,
1710                                         (u8 *) (&udc->local_setup_buff));
1711                         setup_received_irq(udc, &udc->local_setup_buff);
1712                         status = IRQ_HANDLED;
1713                 }
1714
1715                 /* completion of dtd */
1716                 if (fsl_readl(&dr_regs->endptcomplete)) {
1717                         dtd_complete_irq(udc);
1718                         status = IRQ_HANDLED;
1719                 }
1720         }
1721
1722         /* SOF (for ISO transfer) */
1723         if (irq_src & USB_STS_SOF) {
1724                 status = IRQ_HANDLED;
1725         }
1726
1727         /* Port Change */
1728         if (irq_src & USB_STS_PORT_CHANGE) {
1729                 port_change_irq(udc);
1730                 status = IRQ_HANDLED;
1731         }
1732
1733         /* Reset Received */
1734         if (irq_src & USB_STS_RESET) {
1735                 reset_irq(udc);
1736                 status = IRQ_HANDLED;
1737         }
1738
1739         /* Sleep Enable (Suspend) */
1740         if (irq_src & USB_STS_SUSPEND) {
1741                 suspend_irq(udc);
1742                 status = IRQ_HANDLED;
1743         }
1744
1745         if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
1746                 VDBG("Error IRQ %x", irq_src);
1747         }
1748
1749         spin_unlock_irqrestore(&udc->lock, flags);
1750         return status;
1751 }
1752
1753 /*----------------------------------------------------------------*
1754  * Hook to gadget drivers
1755  * Called by initialization code of gadget drivers
1756 *----------------------------------------------------------------*/
1757 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1758 {
1759         int retval = -ENODEV;
1760         unsigned long flags = 0;
1761
1762         if (!udc_controller)
1763                 return -ENODEV;
1764
1765         if (!driver || (driver->speed != USB_SPEED_FULL
1766                                 && driver->speed != USB_SPEED_HIGH)
1767                         || !driver->bind || !driver->disconnect
1768                         || !driver->setup)
1769                 return -EINVAL;
1770
1771         if (udc_controller->driver)
1772                 return -EBUSY;
1773
1774         /* lock is needed but whether should use this lock or another */
1775         spin_lock_irqsave(&udc_controller->lock, flags);
1776
1777         driver->driver.bus = NULL;
1778         /* hook up the driver */
1779         udc_controller->driver = driver;
1780         udc_controller->gadget.dev.driver = &driver->driver;
1781         spin_unlock_irqrestore(&udc_controller->lock, flags);
1782
1783         /* bind udc driver to gadget driver */
1784         retval = driver->bind(&udc_controller->gadget);
1785         if (retval) {
1786                 VDBG("bind to %s --> %d", driver->driver.name, retval);
1787                 udc_controller->gadget.dev.driver = NULL;
1788                 udc_controller->driver = NULL;
1789                 goto out;
1790         }
1791
1792         /* Enable DR IRQ reg and Set usbcmd reg  Run bit */
1793         dr_controller_run(udc_controller);
1794         udc_controller->usb_state = USB_STATE_ATTACHED;
1795         udc_controller->ep0_state = WAIT_FOR_SETUP;
1796         udc_controller->ep0_dir = 0;
1797         printk(KERN_INFO "%s: bind to driver %s\n",
1798                         udc_controller->gadget.name, driver->driver.name);
1799
1800 out:
1801         if (retval)
1802                 printk("gadget driver register failed %d\n", retval);
1803         return retval;
1804 }
1805 EXPORT_SYMBOL(usb_gadget_register_driver);
1806
1807 /* Disconnect from gadget driver */
1808 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1809 {
1810         struct fsl_ep *loop_ep;
1811         unsigned long flags;
1812
1813         if (!udc_controller)
1814                 return -ENODEV;
1815
1816         if (!driver || driver != udc_controller->driver || !driver->unbind)
1817                 return -EINVAL;
1818
1819         if (udc_controller->transceiver)
1820                 otg_set_peripheral(udc_controller->transceiver, NULL);
1821
1822         /* stop DR, disable intr */
1823         dr_controller_stop(udc_controller);
1824
1825         /* in fact, no needed */
1826         udc_controller->usb_state = USB_STATE_ATTACHED;
1827         udc_controller->ep0_state = WAIT_FOR_SETUP;
1828         udc_controller->ep0_dir = 0;
1829
1830         /* stand operation */
1831         spin_lock_irqsave(&udc_controller->lock, flags);
1832         udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
1833         nuke(&udc_controller->eps[0], -ESHUTDOWN);
1834         list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
1835                         ep.ep_list)
1836                 nuke(loop_ep, -ESHUTDOWN);
1837         spin_unlock_irqrestore(&udc_controller->lock, flags);
1838
1839         /* report disconnect; the controller is already quiesced */
1840         driver->disconnect(&udc_controller->gadget);
1841
1842         /* unbind gadget and unhook driver. */
1843         driver->unbind(&udc_controller->gadget);
1844         udc_controller->gadget.dev.driver = NULL;
1845         udc_controller->driver = NULL;
1846
1847         printk("unregistered gadget driver '%s'\n", driver->driver.name);
1848         return 0;
1849 }
1850 EXPORT_SYMBOL(usb_gadget_unregister_driver);
1851
1852 /*-------------------------------------------------------------------------
1853                 PROC File System Support
1854 -------------------------------------------------------------------------*/
1855 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1856
1857 #include <linux/seq_file.h>
1858
1859 static const char proc_filename[] = "driver/fsl_usb2_udc";
1860
1861 static int fsl_proc_read(char *page, char **start, off_t off, int count,
1862                 int *eof, void *_dev)
1863 {
1864         char *buf = page;
1865         char *next = buf;
1866         unsigned size = count;
1867         unsigned long flags;
1868         int t, i;
1869         u32 tmp_reg;
1870         struct fsl_ep *ep = NULL;
1871         struct fsl_req *req;
1872
1873         struct fsl_udc *udc = udc_controller;
1874         if (off != 0)
1875                 return 0;
1876
1877         spin_lock_irqsave(&udc->lock, flags);
1878
1879         /* ------basic driver information ---- */
1880         t = scnprintf(next, size,
1881                         DRIVER_DESC "\n"
1882                         "%s version: %s\n"
1883                         "Gadget driver: %s\n\n",
1884                         driver_name, DRIVER_VERSION,
1885                         udc->driver ? udc->driver->driver.name : "(none)");
1886         size -= t;
1887         next += t;
1888
1889         /* ------ DR Registers ----- */
1890         tmp_reg = fsl_readl(&dr_regs->usbcmd);
1891         t = scnprintf(next, size,
1892                         "USBCMD reg:\n"
1893                         "SetupTW: %d\n"
1894                         "Run/Stop: %s\n\n",
1895                         (tmp_reg & USB_CMD_SUTW) ? 1 : 0,
1896                         (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
1897         size -= t;
1898         next += t;
1899
1900         tmp_reg = fsl_readl(&dr_regs->usbsts);
1901         t = scnprintf(next, size,
1902                         "USB Status Reg:\n"
1903                         "Dr Suspend: %d Reset Received: %d System Error: %s "
1904                         "USB Error Interrupt: %s\n\n",
1905                         (tmp_reg & USB_STS_SUSPEND) ? 1 : 0,
1906                         (tmp_reg & USB_STS_RESET) ? 1 : 0,
1907                         (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
1908                         (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
1909         size -= t;
1910         next += t;
1911
1912         tmp_reg = fsl_readl(&dr_regs->usbintr);
1913         t = scnprintf(next, size,
1914                         "USB Intrrupt Enable Reg:\n"
1915                         "Sleep Enable: %d SOF Received Enable: %d "
1916                         "Reset Enable: %d\n"
1917                         "System Error Enable: %d "
1918                         "Port Change Dectected Enable: %d\n"
1919                         "USB Error Intr Enable: %d USB Intr Enable: %d\n\n",
1920                         (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
1921                         (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
1922                         (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0,
1923                         (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0,
1924                         (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
1925                         (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
1926                         (tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
1927         size -= t;
1928         next += t;
1929
1930         tmp_reg = fsl_readl(&dr_regs->frindex);
1931         t = scnprintf(next, size,
1932                         "USB Frame Index Reg: Frame Number is 0x%x\n\n",
1933                         (tmp_reg & USB_FRINDEX_MASKS));
1934         size -= t;
1935         next += t;
1936
1937         tmp_reg = fsl_readl(&dr_regs->deviceaddr);
1938         t = scnprintf(next, size,
1939                         "USB Device Address Reg: Device Addr is 0x%x\n\n",
1940                         (tmp_reg & USB_DEVICE_ADDRESS_MASK));
1941         size -= t;
1942         next += t;
1943
1944         tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
1945         t = scnprintf(next, size,
1946                         "USB Endpoint List Address Reg: "
1947                         "Device Addr is 0x%x\n\n",
1948                         (tmp_reg & USB_EP_LIST_ADDRESS_MASK));
1949         size -= t;
1950         next += t;
1951
1952         tmp_reg = fsl_readl(&dr_regs->portsc1);
1953         t = scnprintf(next, size,
1954                 "USB Port Status&Control Reg:\n"
1955                 "Port Transceiver Type : %s Port Speed: %s\n"
1956                 "PHY Low Power Suspend: %s Port Reset: %s "
1957                 "Port Suspend Mode: %s\n"
1958                 "Over-current Change: %s "
1959                 "Port Enable/Disable Change: %s\n"
1960                 "Port Enabled/Disabled: %s "
1961                 "Current Connect Status: %s\n\n", ( {
1962                         char *s;
1963                         switch (tmp_reg & PORTSCX_PTS_FSLS) {
1964                         case PORTSCX_PTS_UTMI:
1965                                 s = "UTMI"; break;
1966                         case PORTSCX_PTS_ULPI:
1967                                 s = "ULPI "; break;
1968                         case PORTSCX_PTS_FSLS:
1969                                 s = "FS/LS Serial"; break;
1970                         default:
1971                                 s = "None"; break;
1972                         }
1973                         s;} ), ( {
1974                         char *s;
1975                         switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
1976                         case PORTSCX_PORT_SPEED_FULL:
1977                                 s = "Full Speed"; break;
1978                         case PORTSCX_PORT_SPEED_LOW:
1979                                 s = "Low Speed"; break;
1980                         case PORTSCX_PORT_SPEED_HIGH:
1981                                 s = "High Speed"; break;
1982                         default:
1983                                 s = "Undefined"; break;
1984                         }
1985                         s;
1986                 } ),
1987                 (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
1988                 "Normal PHY mode" : "Low power mode",
1989                 (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
1990                 "Not in Reset",
1991                 (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in",
1992                 (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" :
1993                 "No",
1994                 (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" :
1995                 "Not change",
1996                 (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" :
1997                 "Not correct",
1998                 (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
1999                 "Attached" : "Not-Att");
2000         size -= t;
2001         next += t;
2002
2003         tmp_reg = fsl_readl(&dr_regs->usbmode);
2004         t = scnprintf(next, size,
2005                         "USB Mode Reg: Controller Mode is: %s\n\n", ( {
2006                                 char *s;
2007                                 switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
2008                                 case USB_MODE_CTRL_MODE_IDLE:
2009                                         s = "Idle"; break;
2010                                 case USB_MODE_CTRL_MODE_DEVICE:
2011                                         s = "Device Controller"; break;
2012                                 case USB_MODE_CTRL_MODE_HOST:
2013                                         s = "Host Controller"; break;
2014                                 default:
2015                                         s = "None"; break;
2016                                 }
2017                                 s;
2018                         } ));
2019         size -= t;
2020         next += t;
2021
2022         tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
2023         t = scnprintf(next, size,
2024                         "Endpoint Setup Status Reg: SETUP on ep 0x%x\n\n",
2025                         (tmp_reg & EP_SETUP_STATUS_MASK));
2026         size -= t;
2027         next += t;
2028
2029         for (i = 0; i < udc->max_ep / 2; i++) {
2030                 tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
2031                 t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n",
2032                                 i, tmp_reg);
2033                 size -= t;
2034                 next += t;
2035         }
2036         tmp_reg = fsl_readl(&dr_regs->endpointprime);
2037         t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n\n", tmp_reg);
2038         size -= t;
2039         next += t;
2040
2041         tmp_reg = usb_sys_regs->snoop1;
2042         t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
2043         size -= t;
2044         next += t;
2045
2046         tmp_reg = usb_sys_regs->control;
2047         t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n",
2048                         tmp_reg);
2049         size -= t;
2050         next += t;
2051
2052         /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
2053         ep = &udc->eps[0];
2054         t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n",
2055                         ep->ep.name, ep_maxpacket(ep), ep_index(ep));
2056         size -= t;
2057         next += t;
2058
2059         if (list_empty(&ep->queue)) {
2060                 t = scnprintf(next, size, "its req queue is empty\n\n");
2061                 size -= t;
2062                 next += t;
2063         } else {
2064                 list_for_each_entry(req, &ep->queue, queue) {
2065                         t = scnprintf(next, size,
2066                                 "req %p actual 0x%x length 0x%x buf %p\n",
2067                                 &req->req, req->req.actual,
2068                                 req->req.length, req->req.buf);
2069                         size -= t;
2070                         next += t;
2071                 }
2072         }
2073         /* other gadget->eplist ep */
2074         list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
2075                 if (ep->desc) {
2076                         t = scnprintf(next, size,
2077                                         "\nFor %s Maxpkt is 0x%x "
2078                                         "index is 0x%x\n",
2079                                         ep->ep.name, ep_maxpacket(ep),
2080                                         ep_index(ep));
2081                         size -= t;
2082                         next += t;
2083
2084                         if (list_empty(&ep->queue)) {
2085                                 t = scnprintf(next, size,
2086                                                 "its req queue is empty\n\n");
2087                                 size -= t;
2088                                 next += t;
2089                         } else {
2090                                 list_for_each_entry(req, &ep->queue, queue) {
2091                                         t = scnprintf(next, size,
2092                                                 "req %p actual 0x%x length "
2093                                                 "0x%x  buf %p\n",
2094                                                 &req->req, req->req.actual,
2095                                                 req->req.length, req->req.buf);
2096                                         size -= t;
2097                                         next += t;
2098                                         }       /* end for each_entry of ep req */
2099                                 }       /* end for else */
2100                         }       /* end for if(ep->queue) */
2101                 }               /* end (ep->desc) */
2102
2103         spin_unlock_irqrestore(&udc->lock, flags);
2104
2105         *eof = 1;
2106         return count - size;
2107 }
2108
2109 #define create_proc_file()      create_proc_read_entry(proc_filename, \
2110                                 0, NULL, fsl_proc_read, NULL)
2111
2112 #define remove_proc_file()      remove_proc_entry(proc_filename, NULL)
2113
2114 #else                           /* !CONFIG_USB_GADGET_DEBUG_FILES */
2115
2116 #define create_proc_file()      do {} while (0)
2117 #define remove_proc_file()      do {} while (0)
2118
2119 #endif                          /* CONFIG_USB_GADGET_DEBUG_FILES */
2120
2121 /*-------------------------------------------------------------------------*/
2122
2123 /* Release udc structures */
2124 static void fsl_udc_release(struct device *dev)
2125 {
2126         complete(udc_controller->done);
2127         dma_free_coherent(dev, udc_controller->ep_qh_size,
2128                         udc_controller->ep_qh, udc_controller->ep_qh_dma);
2129         kfree(udc_controller);
2130 }
2131
2132 /******************************************************************
2133         Internal structure setup functions
2134 *******************************************************************/
2135 /*------------------------------------------------------------------
2136  * init resource for globle controller
2137  * Return the udc handle on success or NULL on failure
2138  ------------------------------------------------------------------*/
2139 static int __init struct_udc_setup(struct fsl_udc *udc,
2140                 struct platform_device *pdev)
2141 {
2142         struct fsl_usb2_platform_data *pdata;
2143         size_t size;
2144
2145         pdata = pdev->dev.platform_data;
2146         udc->phy_mode = pdata->phy_mode;
2147
2148         udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL);
2149         if (!udc->eps) {
2150                 ERR("malloc fsl_ep failed\n");
2151                 return -1;
2152         }
2153
2154         /* initialized QHs, take care of alignment */
2155         size = udc->max_ep * sizeof(struct ep_queue_head);
2156         if (size < QH_ALIGNMENT)
2157                 size = QH_ALIGNMENT;
2158         else if ((size % QH_ALIGNMENT) != 0) {
2159                 size += QH_ALIGNMENT + 1;
2160                 size &= ~(QH_ALIGNMENT - 1);
2161         }
2162         udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
2163                                         &udc->ep_qh_dma, GFP_KERNEL);
2164         if (!udc->ep_qh) {
2165                 ERR("malloc QHs for udc failed\n");
2166                 kfree(udc->eps);
2167                 return -1;
2168         }
2169
2170         udc->ep_qh_size = size;
2171
2172         /* Initialize ep0 status request structure */
2173         /* FIXME: fsl_alloc_request() ignores ep argument */
2174         udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
2175                         struct fsl_req, req);
2176         /* allocate a small amount of memory to get valid address */
2177         udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
2178         udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
2179
2180         udc->resume_state = USB_STATE_NOTATTACHED;
2181         udc->usb_state = USB_STATE_POWERED;
2182         udc->ep0_dir = 0;
2183         udc->remote_wakeup = 0; /* default to 0 on reset */
2184
2185         return 0;
2186 }
2187
2188 /*----------------------------------------------------------------
2189  * Setup the fsl_ep struct for eps
2190  * Link fsl_ep->ep to gadget->ep_list
2191  * ep0out is not used so do nothing here
2192  * ep0in should be taken care
2193  *--------------------------------------------------------------*/
2194 static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
2195                 char *name, int link)
2196 {
2197         struct fsl_ep *ep = &udc->eps[index];
2198
2199         ep->udc = udc;
2200         strcpy(ep->name, name);
2201         ep->ep.name = ep->name;
2202
2203         ep->ep.ops = &fsl_ep_ops;
2204         ep->stopped = 0;
2205
2206         /* for ep0: maxP defined in desc
2207          * for other eps, maxP is set by epautoconfig() called by gadget layer
2208          */
2209         ep->ep.maxpacket = (unsigned short) ~0;
2210
2211         /* the queue lists any req for this ep */
2212         INIT_LIST_HEAD(&ep->queue);
2213
2214         /* gagdet.ep_list used for ep_autoconfig so no ep0 */
2215         if (link)
2216                 list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
2217         ep->gadget = &udc->gadget;
2218         ep->qh = &udc->ep_qh[index];
2219
2220         return 0;
2221 }
2222
2223 /* Driver probe function
2224  * all intialization operations implemented here except enabling usb_intr reg
2225  * board setup should have been done in the platform code
2226  */
2227 static int __init fsl_udc_probe(struct platform_device *pdev)
2228 {
2229         struct resource *res;
2230         int ret = -ENODEV;
2231         unsigned int i;
2232         u32 dccparams;
2233
2234         if (strcmp(pdev->name, driver_name)) {
2235                 VDBG("Wrong device");
2236                 return -ENODEV;
2237         }
2238
2239         udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
2240         if (udc_controller == NULL) {
2241                 ERR("malloc udc failed\n");
2242                 return -ENOMEM;
2243         }
2244
2245         spin_lock_init(&udc_controller->lock);
2246         udc_controller->stopped = 1;
2247
2248         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2249         if (!res) {
2250                 ret = -ENXIO;
2251                 goto err_kfree;
2252         }
2253
2254         if (!request_mem_region(res->start, res->end - res->start + 1,
2255                                 driver_name)) {
2256                 ERR("request mem region for %s failed\n", pdev->name);
2257                 ret = -EBUSY;
2258                 goto err_kfree;
2259         }
2260
2261         dr_regs = ioremap(res->start, res->end - res->start + 1);
2262         if (!dr_regs) {
2263                 ret = -ENOMEM;
2264                 goto err_release_mem_region;
2265         }
2266
2267         usb_sys_regs = (struct usb_sys_interface *)
2268                         ((u32)dr_regs + USB_DR_SYS_OFFSET);
2269
2270         /* Read Device Controller Capability Parameters register */
2271         dccparams = fsl_readl(&dr_regs->dccparams);
2272         if (!(dccparams & DCCPARAMS_DC)) {
2273                 ERR("This SOC doesn't support device role\n");
2274                 ret = -ENODEV;
2275                 goto err_iounmap;
2276         }
2277         /* Get max device endpoints */
2278         /* DEN is bidirectional ep number, max_ep doubles the number */
2279         udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
2280
2281         udc_controller->irq = platform_get_irq(pdev, 0);
2282         if (!udc_controller->irq) {
2283                 ret = -ENODEV;
2284                 goto err_iounmap;
2285         }
2286
2287         ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
2288                         driver_name, udc_controller);
2289         if (ret != 0) {
2290                 ERR("cannot request irq %d err %d\n",
2291                                 udc_controller->irq, ret);
2292                 goto err_iounmap;
2293         }
2294
2295         /* Initialize the udc structure including QH member and other member */
2296         if (struct_udc_setup(udc_controller, pdev)) {
2297                 ERR("Can't initialize udc data structure\n");
2298                 ret = -ENOMEM;
2299                 goto err_free_irq;
2300         }
2301
2302         /* initialize usb hw reg except for regs for EP,
2303          * leave usbintr reg untouched */
2304         dr_controller_setup(udc_controller);
2305
2306         /* Setup gadget structure */
2307         udc_controller->gadget.ops = &fsl_gadget_ops;
2308         udc_controller->gadget.is_dualspeed = 1;
2309         udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
2310         INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
2311         udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
2312         udc_controller->gadget.name = driver_name;
2313
2314         /* Setup gadget.dev and register with kernel */
2315         dev_set_name(&udc_controller->gadget.dev, "gadget");
2316         udc_controller->gadget.dev.release = fsl_udc_release;
2317         udc_controller->gadget.dev.parent = &pdev->dev;
2318         ret = device_register(&udc_controller->gadget.dev);
2319         if (ret < 0)
2320                 goto err_free_irq;
2321
2322         /* setup QH and epctrl for ep0 */
2323         ep0_setup(udc_controller);
2324
2325         /* setup udc->eps[] for ep0 */
2326         struct_ep_setup(udc_controller, 0, "ep0", 0);
2327         /* for ep0: the desc defined here;
2328          * for other eps, gadget layer called ep_enable with defined desc
2329          */
2330         udc_controller->eps[0].desc = &fsl_ep0_desc;
2331         udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
2332
2333         /* setup the udc->eps[] for non-control endpoints and link
2334          * to gadget.ep_list */
2335         for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) {
2336                 char name[14];
2337
2338                 sprintf(name, "ep%dout", i);
2339                 struct_ep_setup(udc_controller, i * 2, name, 1);
2340                 sprintf(name, "ep%din", i);
2341                 struct_ep_setup(udc_controller, i * 2 + 1, name, 1);
2342         }
2343
2344         /* use dma_pool for TD management */
2345         udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev,
2346                         sizeof(struct ep_td_struct),
2347                         DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
2348         if (udc_controller->td_pool == NULL) {
2349                 ret = -ENOMEM;
2350                 goto err_unregister;
2351         }
2352         create_proc_file();
2353         return 0;
2354
2355 err_unregister:
2356         device_unregister(&udc_controller->gadget.dev);
2357 err_free_irq:
2358         free_irq(udc_controller->irq, udc_controller);
2359 err_iounmap:
2360         iounmap(dr_regs);
2361 err_release_mem_region:
2362         release_mem_region(res->start, res->end - res->start + 1);
2363 err_kfree:
2364         kfree(udc_controller);
2365         udc_controller = NULL;
2366         return ret;
2367 }
2368
2369 /* Driver removal function
2370  * Free resources and finish pending transactions
2371  */
2372 static int __exit fsl_udc_remove(struct platform_device *pdev)
2373 {
2374         struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2375
2376         DECLARE_COMPLETION(done);
2377
2378         if (!udc_controller)
2379                 return -ENODEV;
2380         udc_controller->done = &done;
2381
2382         /* DR has been stopped in usb_gadget_unregister_driver() */
2383         remove_proc_file();
2384
2385         /* Free allocated memory */
2386         kfree(udc_controller->status_req->req.buf);
2387         kfree(udc_controller->status_req);
2388         kfree(udc_controller->eps);
2389
2390         dma_pool_destroy(udc_controller->td_pool);
2391         free_irq(udc_controller->irq, udc_controller);
2392         iounmap(dr_regs);
2393         release_mem_region(res->start, res->end - res->start + 1);
2394
2395         device_unregister(&udc_controller->gadget.dev);
2396         /* free udc --wait for the release() finished */
2397         wait_for_completion(&done);
2398
2399         return 0;
2400 }
2401
2402 /*-----------------------------------------------------------------
2403  * Modify Power management attributes
2404  * Used by OTG statemachine to disable gadget temporarily
2405  -----------------------------------------------------------------*/
2406 static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state)
2407 {
2408         dr_controller_stop(udc_controller);
2409         return 0;
2410 }
2411
2412 /*-----------------------------------------------------------------
2413  * Invoked on USB resume. May be called in_interrupt.
2414  * Here we start the DR controller and enable the irq
2415  *-----------------------------------------------------------------*/
2416 static int fsl_udc_resume(struct platform_device *pdev)
2417 {
2418         /* Enable DR irq reg and set controller Run */
2419         if (udc_controller->stopped) {
2420                 dr_controller_setup(udc_controller);
2421                 dr_controller_run(udc_controller);
2422         }
2423         udc_controller->usb_state = USB_STATE_ATTACHED;
2424         udc_controller->ep0_state = WAIT_FOR_SETUP;
2425         udc_controller->ep0_dir = 0;
2426         return 0;
2427 }
2428
2429 /*-------------------------------------------------------------------------
2430         Register entry point for the peripheral controller driver
2431 --------------------------------------------------------------------------*/
2432
2433 static struct platform_driver udc_driver = {
2434         .remove  = __exit_p(fsl_udc_remove),
2435         /* these suspend and resume are not usb suspend and resume */
2436         .suspend = fsl_udc_suspend,
2437         .resume  = fsl_udc_resume,
2438         .driver  = {
2439                 .name = (char *)driver_name,
2440                 .owner = THIS_MODULE,
2441         },
2442 };
2443
2444 static int __init udc_init(void)
2445 {
2446         printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION);
2447         return platform_driver_probe(&udc_driver, fsl_udc_probe);
2448 }
2449
2450 module_init(udc_init);
2451
2452 static void __exit udc_exit(void)
2453 {
2454         platform_driver_unregister(&udc_driver);
2455         printk("%s unregistered\n", driver_desc);
2456 }
2457
2458 module_exit(udc_exit);
2459
2460 MODULE_DESCRIPTION(DRIVER_DESC);
2461 MODULE_AUTHOR(DRIVER_AUTHOR);
2462 MODULE_LICENSE("GPL");
2463 MODULE_ALIAS("platform:fsl-usb2-udc");