V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300.
[linux-2.6] / drivers / media / video / saa7114.c
1 /*
2  * saa7114 - Philips SAA7114H video decoder driver version 0.0.1
3  *
4  * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
5  *
6  * Based on saa7111 driver by Dave Perks
7  *
8  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
9  *
10  * Slight changes for video timing and attachment output by
11  * Wolfgang Scherr <scherr@net4you.net>
12  *
13  * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
14  *    - moved over to linux>=2.4.x i2c protocol (1/1/2003)
15  *
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License as published by
18  * the Free Software Foundation; either version 2 of the License, or
19  * (at your option) any later version.
20  *
21  * This program is distributed in the hope that it will be useful,
22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
24  * GNU General Public License for more details.
25  *
26  * You should have received a copy of the GNU General Public License
27  * along with this program; if not, write to the Free Software
28  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29  */
30
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/delay.h>
34 #include <linux/errno.h>
35 #include <linux/fs.h>
36 #include <linux/kernel.h>
37 #include <linux/major.h>
38
39 #include <linux/slab.h>
40
41 #include <linux/mm.h>
42 #include <linux/pci.h>
43 #include <linux/signal.h>
44 #include <asm/io.h>
45 #include <asm/pgtable.h>
46 #include <asm/page.h>
47 #include <linux/sched.h>
48 #include <linux/types.h>
49
50 #include <linux/videodev.h>
51 #include <asm/uaccess.h>
52
53 MODULE_DESCRIPTION("Philips SAA7114H video decoder driver");
54 MODULE_AUTHOR("Maxim Yevtyushkin");
55 MODULE_LICENSE("GPL");
56
57 #include <linux/i2c.h>
58
59 #define I2C_NAME(x) (x)->name
60
61 #include <linux/video_decoder.h>
62
63 static int debug = 0;
64 module_param(debug, int, 0);
65 MODULE_PARM_DESC(debug, "Debug level (0-1)");
66
67 #define dprintk(num, format, args...) \
68         do { \
69                 if (debug >= num) \
70                         printk(format, ##args); \
71         } while (0)
72
73 /* ----------------------------------------------------------------------- */
74
75 struct saa7114 {
76         unsigned char reg[0xf0 * 2];
77
78         int norm;
79         int input;
80         int enable;
81         int bright;
82         int contrast;
83         int hue;
84         int sat;
85         int playback;
86 };
87
88 #define   I2C_SAA7114        0x42
89 #define   I2C_SAA7114A       0x40
90
91 #define   I2C_DELAY   10
92
93
94 //#define SAA_7114_NTSC_HSYNC_START       (-3)
95 //#define SAA_7114_NTSC_HSYNC_STOP        (-18)
96
97 #define SAA_7114_NTSC_HSYNC_START  (-17)
98 #define SAA_7114_NTSC_HSYNC_STOP   (-32)
99
100 //#define SAA_7114_NTSC_HOFFSET           (5)
101 #define SAA_7114_NTSC_HOFFSET           (6)
102 #define SAA_7114_NTSC_VOFFSET           (10)
103 #define SAA_7114_NTSC_WIDTH             (720)
104 #define SAA_7114_NTSC_HEIGHT            (250)
105
106 #define SAA_7114_SECAM_HSYNC_START      (-17)
107 #define SAA_7114_SECAM_HSYNC_STOP       (-32)
108
109 #define SAA_7114_SECAM_HOFFSET          (2)
110 #define SAA_7114_SECAM_VOFFSET          (10)
111 #define SAA_7114_SECAM_WIDTH            (720)
112 #define SAA_7114_SECAM_HEIGHT           (300)
113
114 #define SAA_7114_PAL_HSYNC_START        (-17)
115 #define SAA_7114_PAL_HSYNC_STOP         (-32)
116
117 #define SAA_7114_PAL_HOFFSET            (2)
118 #define SAA_7114_PAL_VOFFSET            (10)
119 #define SAA_7114_PAL_WIDTH              (720)
120 #define SAA_7114_PAL_HEIGHT             (300)
121
122
123
124 #define SAA_7114_VERTICAL_CHROMA_OFFSET         0       //0x50504040
125 #define SAA_7114_VERTICAL_LUMA_OFFSET           0
126
127 #define REG_ADDR(x) (((x) << 1) + 1)
128 #define LOBYTE(x) ((unsigned char)((x) & 0xff))
129 #define HIBYTE(x) ((unsigned char)(((x) >> 8) & 0xff))
130 #define LOWORD(x) ((unsigned short int)((x) & 0xffff))
131 #define HIWORD(x) ((unsigned short int)(((x) >> 16) & 0xffff))
132
133
134 /* ----------------------------------------------------------------------- */
135
136 static inline int
137 saa7114_write (struct i2c_client *client,
138                u8                 reg,
139                u8                 value)
140 {
141         return i2c_smbus_write_byte_data(client, reg, value);
142 }
143
144 static int
145 saa7114_write_block (struct i2c_client *client,
146                      const u8          *data,
147                      unsigned int       len)
148 {
149         int ret = -1;
150         u8 reg;
151
152         /* the saa7114 has an autoincrement function, use it if
153          * the adapter understands raw I2C */
154         if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
155                 /* do raw I2C, not smbus compatible */
156                 u8 block_data[32];
157                 int block_len;
158
159                 while (len >= 2) {
160                         block_len = 0;
161                         block_data[block_len++] = reg = data[0];
162                         do {
163                                 block_data[block_len++] = data[1];
164                                 reg++;
165                                 len -= 2;
166                                 data += 2;
167                         } while (len >= 2 && data[0] == reg &&
168                                  block_len < 32);
169                         if ((ret = i2c_master_send(client, block_data,
170                                                    block_len)) < 0)
171                                 break;
172                 }
173         } else {
174                 /* do some slow I2C emulation kind of thing */
175                 while (len >= 2) {
176                         reg = *data++;
177                         if ((ret = saa7114_write(client, reg,
178                                                  *data++)) < 0)
179                                 break;
180                         len -= 2;
181                 }
182         }
183
184         return ret;
185 }
186
187 static inline int
188 saa7114_read (struct i2c_client *client,
189               u8                 reg)
190 {
191         return i2c_smbus_read_byte_data(client, reg);
192 }
193
194 /* ----------------------------------------------------------------------- */
195
196 // initially set NTSC, composite
197
198
199 static const unsigned char init[] = {
200         0x00, 0x00,             /* 00 - ID byte , chip version,
201                                  * read only */
202         0x01, 0x08,             /* 01 - X,X,X,X, IDEL3 to IDEL0 -
203                                  * horizontal increment delay,
204                                  * recommended position */
205         0x02, 0x00,             /* 02 - FUSE=3, GUDL=2, MODE=0 ;
206                                  * input control */
207         0x03, 0x10,             /* 03 - HLNRS=0, VBSL=1, WPOFF=0,
208                                  * HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */
209         0x04, 0x90,             /* 04 - GAI1=256 */
210         0x05, 0x90,             /* 05 - GAI2=256 */
211         0x06, SAA_7114_NTSC_HSYNC_START,        /* 06 - HSB: hsync start,
212                                  * depends on the video standard */
213         0x07, SAA_7114_NTSC_HSYNC_STOP, /* 07 - HSS: hsync stop, depends
214                                  *on the video standard */
215         0x08, 0xb8,             /* 08 - AUFD=1, FSEL=1, EXFIL=0, VTRC=1,
216                                  * HPLL: free running in playback, locked
217                                  * in capture, VNOI=0 */
218         0x09, 0x80,             /* 09 - BYPS=0, PREF=0, BPSS=0, VBLB=0,
219                                  * UPTCV=0, APER=1; depends from input */
220         0x0a, 0x80,             /* 0a - BRIG=128 */
221         0x0b, 0x44,             /* 0b - CONT=1.109 */
222         0x0c, 0x40,             /* 0c - SATN=1.0 */
223         0x0d, 0x00,             /* 0d - HUE=0 */
224         0x0e, 0x84,             /* 0e - CDTO, CSTD2 to 0, DCVF, FCTC,
225                                  * CCOMB; depends from video standard */
226         0x0f, 0x24,             /* 0f - ACGC,CGAIN6 to CGAIN0; depends
227                                  * from video standard */
228         0x10, 0x03,             /* 10 - OFFU1 to 0, OFFV1 to 0, CHBW,
229                                  * LCBW2 to 0 */
230         0x11, 0x59,             /* 11 - COLO, RTP1, HEDL1 to 0, RTP0,
231                                  * YDEL2 to 0 */
232         0x12, 0xc9,             /* 12 - RT signal control RTSE13 to 10
233                                  * and 03 to 00 */
234         0x13, 0x80,             /* 13 - RT/X port output control  */
235         0x14, 0x00,             /* 14 - analog, ADC, compatibility control */
236         0x15, 0x00,             /* 15 - VGATE start FID change  */
237         0x16, 0xfe,             /* 16 - VGATE stop */
238         0x17, 0x00,             /* 17 - Misc., VGATE MSBs */
239         0x18, 0x40,             /* RAWG */
240         0x19, 0x80,             /* RAWO */
241         0x1a, 0x00,
242         0x1b, 0x00,
243         0x1c, 0x00,
244         0x1d, 0x00,
245         0x1e, 0x00,
246         0x1f, 0x00,             /* status byte, read only */
247         0x20, 0x00,             /* video decoder reserved part */
248         0x21, 0x00,
249         0x22, 0x00,
250         0x23, 0x00,
251         0x24, 0x00,
252         0x25, 0x00,
253         0x26, 0x00,
254         0x27, 0x00,
255         0x28, 0x00,
256         0x29, 0x00,
257         0x2a, 0x00,
258         0x2b, 0x00,
259         0x2c, 0x00,
260         0x2d, 0x00,
261         0x2e, 0x00,
262         0x2f, 0x00,
263         0x30, 0xbc,             /* audio clock generator */
264         0x31, 0xdf,
265         0x32, 0x02,
266         0x33, 0x00,
267         0x34, 0xcd,
268         0x35, 0xcc,
269         0x36, 0x3a,
270         0x37, 0x00,
271         0x38, 0x03,
272         0x39, 0x10,
273         0x3a, 0x00,
274         0x3b, 0x00,
275         0x3c, 0x00,
276         0x3d, 0x00,
277         0x3e, 0x00,
278         0x3f, 0x00,
279         0x40, 0x00,             /* VBI data slicer */
280         0x41, 0xff,
281         0x42, 0xff,
282         0x43, 0xff,
283         0x44, 0xff,
284         0x45, 0xff,
285         0x46, 0xff,
286         0x47, 0xff,
287         0x48, 0xff,
288         0x49, 0xff,
289         0x4a, 0xff,
290         0x4b, 0xff,
291         0x4c, 0xff,
292         0x4d, 0xff,
293         0x4e, 0xff,
294         0x4f, 0xff,
295         0x50, 0xff,
296         0x51, 0xff,
297         0x52, 0xff,
298         0x53, 0xff,
299         0x54, 0xff,
300         0x55, 0xff,
301         0x56, 0xff,
302         0x57, 0xff,
303         0x58, 0x40,             // framing code
304         0x59, 0x47,             // horizontal offset
305         0x5a, 0x06,             // vertical offset
306         0x5b, 0x83,             // field offset
307         0x5c, 0x00,             // reserved
308         0x5d, 0x3e,             // header and data
309         0x5e, 0x00,             // sliced data
310         0x5f, 0x00,             // reserved
311         0x60, 0x00,             /* video decoder reserved part */
312         0x61, 0x00,
313         0x62, 0x00,
314         0x63, 0x00,
315         0x64, 0x00,
316         0x65, 0x00,
317         0x66, 0x00,
318         0x67, 0x00,
319         0x68, 0x00,
320         0x69, 0x00,
321         0x6a, 0x00,
322         0x6b, 0x00,
323         0x6c, 0x00,
324         0x6d, 0x00,
325         0x6e, 0x00,
326         0x6f, 0x00,
327         0x70, 0x00,             /* video decoder reserved part */
328         0x71, 0x00,
329         0x72, 0x00,
330         0x73, 0x00,
331         0x74, 0x00,
332         0x75, 0x00,
333         0x76, 0x00,
334         0x77, 0x00,
335         0x78, 0x00,
336         0x79, 0x00,
337         0x7a, 0x00,
338         0x7b, 0x00,
339         0x7c, 0x00,
340         0x7d, 0x00,
341         0x7e, 0x00,
342         0x7f, 0x00,
343         0x80, 0x00,             /* X-port, I-port and scaler */
344         0x81, 0x00,
345         0x82, 0x00,
346         0x83, 0x00,
347         0x84, 0xc5,
348         0x85, 0x0d,             // hsync and vsync ?
349         0x86, 0x40,
350         0x87, 0x01,
351         0x88, 0x00,
352         0x89, 0x00,
353         0x8a, 0x00,
354         0x8b, 0x00,
355         0x8c, 0x00,
356         0x8d, 0x00,
357         0x8e, 0x00,
358         0x8f, 0x00,
359         0x90, 0x03,             /* Task A definition           */
360         0x91, 0x08,
361         0x92, 0x00,
362         0x93, 0x40,
363         0x94, 0x00,             // window settings
364         0x95, 0x00,
365         0x96, 0x00,
366         0x97, 0x00,
367         0x98, 0x00,
368         0x99, 0x00,
369         0x9a, 0x00,
370         0x9b, 0x00,
371         0x9c, 0x00,
372         0x9d, 0x00,
373         0x9e, 0x00,
374         0x9f, 0x00,
375         0xa0, 0x01,             /* horizontal integer prescaling ratio */
376         0xa1, 0x00,             /* horizontal prescaler accumulation
377                                  * sequence length */
378         0xa2, 0x00,             /* UV FIR filter, Y FIR filter, prescaler
379                                  * DC gain */
380         0xa3, 0x00,
381         0xa4, 0x80,             // luminance brightness
382         0xa5, 0x40,             // luminance gain
383         0xa6, 0x40,             // chrominance saturation
384         0xa7, 0x00,
385         0xa8, 0x00,             // horizontal luminance scaling increment
386         0xa9, 0x04,
387         0xaa, 0x00,             // horizontal luminance phase offset
388         0xab, 0x00,
389         0xac, 0x00,             // horizontal chrominance scaling increment
390         0xad, 0x02,
391         0xae, 0x00,             // horizontal chrominance phase offset
392         0xaf, 0x00,
393         0xb0, 0x00,             // vertical luminance scaling increment
394         0xb1, 0x04,
395         0xb2, 0x00,             // vertical chrominance scaling increment
396         0xb3, 0x04,
397         0xb4, 0x00,
398         0xb5, 0x00,
399         0xb6, 0x00,
400         0xb7, 0x00,
401         0xb8, 0x00,
402         0xb9, 0x00,
403         0xba, 0x00,
404         0xbb, 0x00,
405         0xbc, 0x00,
406         0xbd, 0x00,
407         0xbe, 0x00,
408         0xbf, 0x00,
409         0xc0, 0x02,             // Task B definition
410         0xc1, 0x08,
411         0xc2, 0x00,
412         0xc3, 0x40,
413         0xc4, 0x00,             // window settings
414         0xc5, 0x00,
415         0xc6, 0x00,
416         0xc7, 0x00,
417         0xc8, 0x00,
418         0xc9, 0x00,
419         0xca, 0x00,
420         0xcb, 0x00,
421         0xcc, 0x00,
422         0xcd, 0x00,
423         0xce, 0x00,
424         0xcf, 0x00,
425         0xd0, 0x01,             // horizontal integer prescaling ratio
426         0xd1, 0x00,             // horizontal prescaler accumulation sequence length
427         0xd2, 0x00,             // UV FIR filter, Y FIR filter, prescaler DC gain
428         0xd3, 0x00,
429         0xd4, 0x80,             // luminance brightness
430         0xd5, 0x40,             // luminance gain
431         0xd6, 0x40,             // chrominance saturation
432         0xd7, 0x00,
433         0xd8, 0x00,             // horizontal luminance scaling increment
434         0xd9, 0x04,
435         0xda, 0x00,             // horizontal luminance phase offset
436         0xdb, 0x00,
437         0xdc, 0x00,             // horizontal chrominance scaling increment
438         0xdd, 0x02,
439         0xde, 0x00,             // horizontal chrominance phase offset
440         0xdf, 0x00,
441         0xe0, 0x00,             // vertical luminance scaling increment
442         0xe1, 0x04,
443         0xe2, 0x00,             // vertical chrominance scaling increment
444         0xe3, 0x04,
445         0xe4, 0x00,
446         0xe5, 0x00,
447         0xe6, 0x00,
448         0xe7, 0x00,
449         0xe8, 0x00,
450         0xe9, 0x00,
451         0xea, 0x00,
452         0xeb, 0x00,
453         0xec, 0x00,
454         0xed, 0x00,
455         0xee, 0x00,
456         0xef, 0x00
457 };
458
459 static int
460 saa7114_command (struct i2c_client *client,
461                  unsigned int       cmd,
462                  void              *arg)
463 {
464         struct saa7114 *decoder = i2c_get_clientdata(client);
465
466         switch (cmd) {
467
468         case 0:
469                 //dprintk(1, KERN_INFO "%s: writing init\n", I2C_NAME(client));
470                 //saa7114_write_block(client, init, sizeof(init));
471                 break;
472
473         case DECODER_DUMP:
474         {
475                 int i;
476
477                 dprintk(1, KERN_INFO "%s: decoder dump\n", I2C_NAME(client));
478
479                 for (i = 0; i < 32; i += 16) {
480                         int j;
481
482                         printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i);
483                         for (j = 0; j < 16; ++j) {
484                                 printk(" %02x",
485                                        saa7114_read(client, i + j));
486                         }
487                         printk("\n");
488                 }
489         }
490                 break;
491
492         case DECODER_GET_CAPABILITIES:
493         {
494                 struct video_decoder_capability *cap = arg;
495
496                 dprintk(1, KERN_DEBUG "%s: decoder get capabilities\n",
497                         I2C_NAME(client));
498
499                 cap->flags = VIDEO_DECODER_PAL |
500                              VIDEO_DECODER_NTSC |
501                              VIDEO_DECODER_AUTO |
502                              VIDEO_DECODER_CCIR;
503                 cap->inputs = 8;
504                 cap->outputs = 1;
505         }
506                 break;
507
508         case DECODER_GET_STATUS:
509         {
510                 int *iarg = arg;
511                 int status;
512                 int res;
513
514                 status = saa7114_read(client, 0x1f);
515
516                 dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client),
517                         status);
518                 res = 0;
519                 if ((status & (1 << 6)) == 0) {
520                         res |= DECODER_STATUS_GOOD;
521                 }
522                 switch (decoder->norm) {
523                 case VIDEO_MODE_NTSC:
524                         res |= DECODER_STATUS_NTSC;
525                         break;
526                 case VIDEO_MODE_PAL:
527                         res |= DECODER_STATUS_PAL;
528                         break;
529                 case VIDEO_MODE_SECAM:
530                         res |= DECODER_STATUS_SECAM;
531                         break;
532                 default:
533                 case VIDEO_MODE_AUTO:
534                         if ((status & (1 << 5)) != 0) {
535                                 res |= DECODER_STATUS_NTSC;
536                         } else {
537                                 res |= DECODER_STATUS_PAL;
538                         }
539                         break;
540                 }
541                 if ((status & (1 << 0)) != 0) {
542                         res |= DECODER_STATUS_COLOR;
543                 }
544                 *iarg = res;
545         }
546                 break;
547
548         case DECODER_SET_NORM:
549         {
550                 int *iarg = arg;
551
552                 short int hoff = 0, voff = 0, w = 0, h = 0;
553
554                 dprintk(1, KERN_DEBUG "%s: decoder set norm ",
555                         I2C_NAME(client));
556                 switch (*iarg) {
557
558                 case VIDEO_MODE_NTSC:
559                         dprintk(1, "NTSC\n");
560                         decoder->reg[REG_ADDR(0x06)] =
561                             SAA_7114_NTSC_HSYNC_START;
562                         decoder->reg[REG_ADDR(0x07)] =
563                             SAA_7114_NTSC_HSYNC_STOP;
564
565                         decoder->reg[REG_ADDR(0x08)] = decoder->playback ? 0x7c : 0xb8; // PLL free when playback, PLL close when capture
566
567                         decoder->reg[REG_ADDR(0x0e)] = 0x85;
568                         decoder->reg[REG_ADDR(0x0f)] = 0x24;
569
570                         hoff = SAA_7114_NTSC_HOFFSET;
571                         voff = SAA_7114_NTSC_VOFFSET;
572                         w = SAA_7114_NTSC_WIDTH;
573                         h = SAA_7114_NTSC_HEIGHT;
574
575                         break;
576
577                 case VIDEO_MODE_PAL:
578                         dprintk(1, "PAL\n");
579                         decoder->reg[REG_ADDR(0x06)] =
580                             SAA_7114_PAL_HSYNC_START;
581                         decoder->reg[REG_ADDR(0x07)] =
582                             SAA_7114_PAL_HSYNC_STOP;
583
584                         decoder->reg[REG_ADDR(0x08)] = decoder->playback ? 0x7c : 0xb8; // PLL free when playback, PLL close when capture
585
586                         decoder->reg[REG_ADDR(0x0e)] = 0x81;
587                         decoder->reg[REG_ADDR(0x0f)] = 0x24;
588
589                         hoff = SAA_7114_PAL_HOFFSET;
590                         voff = SAA_7114_PAL_VOFFSET;
591                         w = SAA_7114_PAL_WIDTH;
592                         h = SAA_7114_PAL_HEIGHT;
593
594                         break;
595
596                 default:
597                         dprintk(1, " Unknown video mode!!!\n");
598                         return -EINVAL;
599
600                 }
601
602
603                 decoder->reg[REG_ADDR(0x94)] = LOBYTE(hoff);    // hoffset low
604                 decoder->reg[REG_ADDR(0x95)] = HIBYTE(hoff) & 0x0f;     // hoffset high
605                 decoder->reg[REG_ADDR(0x96)] = LOBYTE(w);       // width low
606                 decoder->reg[REG_ADDR(0x97)] = HIBYTE(w) & 0x0f;        // width high
607                 decoder->reg[REG_ADDR(0x98)] = LOBYTE(voff);    // voffset low
608                 decoder->reg[REG_ADDR(0x99)] = HIBYTE(voff) & 0x0f;     // voffset high
609                 decoder->reg[REG_ADDR(0x9a)] = LOBYTE(h + 2);   // height low
610                 decoder->reg[REG_ADDR(0x9b)] = HIBYTE(h + 2) & 0x0f;    // height high
611                 decoder->reg[REG_ADDR(0x9c)] = LOBYTE(w);       // out width low
612                 decoder->reg[REG_ADDR(0x9d)] = HIBYTE(w) & 0x0f;        // out width high
613                 decoder->reg[REG_ADDR(0x9e)] = LOBYTE(h);       // out height low
614                 decoder->reg[REG_ADDR(0x9f)] = HIBYTE(h) & 0x0f;        // out height high
615
616                 decoder->reg[REG_ADDR(0xc4)] = LOBYTE(hoff);    // hoffset low
617                 decoder->reg[REG_ADDR(0xc5)] = HIBYTE(hoff) & 0x0f;     // hoffset high
618                 decoder->reg[REG_ADDR(0xc6)] = LOBYTE(w);       // width low
619                 decoder->reg[REG_ADDR(0xc7)] = HIBYTE(w) & 0x0f;        // width high
620                 decoder->reg[REG_ADDR(0xc8)] = LOBYTE(voff);    // voffset low
621                 decoder->reg[REG_ADDR(0xc9)] = HIBYTE(voff) & 0x0f;     // voffset high
622                 decoder->reg[REG_ADDR(0xca)] = LOBYTE(h + 2);   // height low
623                 decoder->reg[REG_ADDR(0xcb)] = HIBYTE(h + 2) & 0x0f;    // height high
624                 decoder->reg[REG_ADDR(0xcc)] = LOBYTE(w);       // out width low
625                 decoder->reg[REG_ADDR(0xcd)] = HIBYTE(w) & 0x0f;        // out width high
626                 decoder->reg[REG_ADDR(0xce)] = LOBYTE(h);       // out height low
627                 decoder->reg[REG_ADDR(0xcf)] = HIBYTE(h) & 0x0f;        // out height high
628
629
630                 saa7114_write(client, 0x80, 0x06);      // i-port and scaler back end clock selection, task A&B off
631                 saa7114_write(client, 0x88, 0xd8);      // sw reset scaler
632                 saa7114_write(client, 0x88, 0xf8);      // sw reset scaler release
633
634                 saa7114_write_block(client, decoder->reg + (0x06 << 1),
635                                     3 << 1);
636                 saa7114_write_block(client, decoder->reg + (0x0e << 1),
637                                     2 << 1);
638                 saa7114_write_block(client, decoder->reg + (0x5a << 1),
639                                     2 << 1);
640
641                 saa7114_write_block(client, decoder->reg + (0x94 << 1),
642                                     (0x9f + 1 - 0x94) << 1);
643                 saa7114_write_block(client, decoder->reg + (0xc4 << 1),
644                                     (0xcf + 1 - 0xc4) << 1);
645
646                 saa7114_write(client, 0x88, 0xd8);      // sw reset scaler
647                 saa7114_write(client, 0x88, 0xf8);      // sw reset scaler release
648                 saa7114_write(client, 0x80, 0x36);      // i-port and scaler back end clock selection
649
650                 decoder->norm = *iarg;
651         }
652                 break;
653
654         case DECODER_SET_INPUT:
655         {
656                 int *iarg = arg;
657
658                 dprintk(1, KERN_DEBUG "%s: decoder set input (%d)\n",
659                         I2C_NAME(client), *iarg);
660                 if (*iarg < 0 || *iarg > 7) {
661                         return -EINVAL;
662                 }
663
664                 if (decoder->input != *iarg) {
665                         dprintk(1, KERN_DEBUG "%s: now setting %s input\n",
666                                 I2C_NAME(client),
667                                 *iarg >= 6 ? "S-Video" : "Composite");
668                         decoder->input = *iarg;
669
670                         /* select mode */
671                         decoder->reg[REG_ADDR(0x02)] =
672                             (decoder->
673                              reg[REG_ADDR(0x02)] & 0xf0) | (decoder->
674                                                             input <
675                                                             6 ? 0x0 : 0x9);
676                         saa7114_write(client, 0x02,
677                                       decoder->reg[REG_ADDR(0x02)]);
678
679                         /* bypass chrominance trap for modes 6..9 */
680                         decoder->reg[REG_ADDR(0x09)] =
681                             (decoder->
682                              reg[REG_ADDR(0x09)] & 0x7f) | (decoder->
683                                                             input <
684                                                             6 ? 0x0 :
685                                                             0x80);
686                         saa7114_write(client, 0x09,
687                                       decoder->reg[REG_ADDR(0x09)]);
688
689                         decoder->reg[REG_ADDR(0x0e)] =
690                             decoder->input <
691                             6 ? decoder->
692                             reg[REG_ADDR(0x0e)] | 1 : decoder->
693                             reg[REG_ADDR(0x0e)] & ~1;
694                         saa7114_write(client, 0x0e,
695                                       decoder->reg[REG_ADDR(0x0e)]);
696                 }
697         }
698                 break;
699
700         case DECODER_SET_OUTPUT:
701         {
702                 int *iarg = arg;
703
704                 dprintk(1, KERN_DEBUG "%s: decoder set output\n",
705                         I2C_NAME(client));
706
707                 /* not much choice of outputs */
708                 if (*iarg != 0) {
709                         return -EINVAL;
710                 }
711         }
712                 break;
713
714         case DECODER_ENABLE_OUTPUT:
715         {
716                 int *iarg = arg;
717                 int enable = (*iarg != 0);
718
719                 dprintk(1, KERN_DEBUG "%s: decoder %s output\n",
720                         I2C_NAME(client), enable ? "enable" : "disable");
721
722                 decoder->playback = !enable;
723
724                 if (decoder->enable != enable) {
725                         decoder->enable = enable;
726
727                         /* RJ: If output should be disabled (for
728                          * playing videos), we also need a open PLL.
729                          * The input is set to 0 (where no input
730                          * source is connected), although this
731                          * is not necessary.
732                          *
733                          * If output should be enabled, we have to
734                          * reverse the above.
735                          */
736
737                         if (decoder->enable) {
738                                 decoder->reg[REG_ADDR(0x08)] = 0xb8;
739                                 decoder->reg[REG_ADDR(0x12)] = 0xc9;
740                                 decoder->reg[REG_ADDR(0x13)] = 0x80;
741                                 decoder->reg[REG_ADDR(0x87)] = 0x01;
742                         } else {
743                                 decoder->reg[REG_ADDR(0x08)] = 0x7c;
744                                 decoder->reg[REG_ADDR(0x12)] = 0x00;
745                                 decoder->reg[REG_ADDR(0x13)] = 0x00;
746                                 decoder->reg[REG_ADDR(0x87)] = 0x00;
747                         }
748
749                         saa7114_write_block(client,
750                                             decoder->reg + (0x12 << 1),
751                                             2 << 1);
752                         saa7114_write(client, 0x08,
753                                       decoder->reg[REG_ADDR(0x08)]);
754                         saa7114_write(client, 0x87,
755                                       decoder->reg[REG_ADDR(0x87)]);
756                         saa7114_write(client, 0x88, 0xd8);      // sw reset scaler
757                         saa7114_write(client, 0x88, 0xf8);      // sw reset scaler release
758                         saa7114_write(client, 0x80, 0x36);
759
760                 }
761         }
762                 break;
763
764         case DECODER_SET_PICTURE:
765         {
766                 struct video_picture *pic = arg;
767
768                 dprintk(1,
769                         KERN_DEBUG
770                         "%s: decoder set picture bright=%d contrast=%d saturation=%d hue=%d\n",
771                         I2C_NAME(client), pic->brightness, pic->contrast,
772                         pic->colour, pic->hue);
773
774                 if (decoder->bright != pic->brightness) {
775                         /* We want 0 to 255 we get 0-65535 */
776                         decoder->bright = pic->brightness;
777                         saa7114_write(client, 0x0a, decoder->bright >> 8);
778                 }
779                 if (decoder->contrast != pic->contrast) {
780                         /* We want 0 to 127 we get 0-65535 */
781                         decoder->contrast = pic->contrast;
782                         saa7114_write(client, 0x0b,
783                                       decoder->contrast >> 9);
784                 }
785                 if (decoder->sat != pic->colour) {
786                         /* We want 0 to 127 we get 0-65535 */
787                         decoder->sat = pic->colour;
788                         saa7114_write(client, 0x0c, decoder->sat >> 9);
789                 }
790                 if (decoder->hue != pic->hue) {
791                         /* We want -128 to 127 we get 0-65535 */
792                         decoder->hue = pic->hue;
793                         saa7114_write(client, 0x0d,
794                                       (decoder->hue - 32768) >> 8);
795                 }
796         }
797                 break;
798
799         default:
800                 return -EINVAL;
801         }
802
803         return 0;
804 }
805
806 /* ----------------------------------------------------------------------- */
807
808 /*
809  * Generic i2c probe
810  * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
811  */
812 static unsigned short normal_i2c[] =
813     { I2C_SAA7114 >> 1, I2C_SAA7114A >> 1, I2C_CLIENT_END };
814
815 static unsigned short ignore = I2C_CLIENT_END;
816
817 static struct i2c_client_address_data addr_data = {
818         .normal_i2c             = normal_i2c,
819         .probe                  = &ignore,
820         .ignore                 = &ignore,
821 };
822
823 static struct i2c_driver i2c_driver_saa7114;
824
825 static int
826 saa7114_detect_client (struct i2c_adapter *adapter,
827                        int                 address,
828                        int                 kind)
829 {
830         int i, err[30];
831         short int hoff = SAA_7114_NTSC_HOFFSET;
832         short int voff = SAA_7114_NTSC_VOFFSET;
833         short int w = SAA_7114_NTSC_WIDTH;
834         short int h = SAA_7114_NTSC_HEIGHT;
835         struct i2c_client *client;
836         struct saa7114 *decoder;
837
838         dprintk(1,
839                 KERN_INFO
840                 "saa7114.c: detecting saa7114 client on address 0x%x\n",
841                 address << 1);
842
843         /* Check if the adapter supports the needed features */
844         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
845                 return 0;
846
847         client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
848         if (client == 0)
849                 return -ENOMEM;
850         client->addr = address;
851         client->adapter = adapter;
852         client->driver = &i2c_driver_saa7114;
853         strlcpy(I2C_NAME(client), "saa7114", sizeof(I2C_NAME(client)));
854
855         decoder = kzalloc(sizeof(struct saa7114), GFP_KERNEL);
856         if (decoder == NULL) {
857                 kfree(client);
858                 return -ENOMEM;
859         }
860         decoder->norm = VIDEO_MODE_NTSC;
861         decoder->input = -1;
862         decoder->enable = 1;
863         decoder->bright = 32768;
864         decoder->contrast = 32768;
865         decoder->hue = 32768;
866         decoder->sat = 32768;
867         decoder->playback = 0;  // initially capture mode useda
868         i2c_set_clientdata(client, decoder);
869
870         memcpy(decoder->reg, init, sizeof(init));
871
872         decoder->reg[REG_ADDR(0x94)] = LOBYTE(hoff);    // hoffset low
873         decoder->reg[REG_ADDR(0x95)] = HIBYTE(hoff) & 0x0f;     // hoffset high
874         decoder->reg[REG_ADDR(0x96)] = LOBYTE(w);       // width low
875         decoder->reg[REG_ADDR(0x97)] = HIBYTE(w) & 0x0f;        // width high
876         decoder->reg[REG_ADDR(0x98)] = LOBYTE(voff);    // voffset low
877         decoder->reg[REG_ADDR(0x99)] = HIBYTE(voff) & 0x0f;     // voffset high
878         decoder->reg[REG_ADDR(0x9a)] = LOBYTE(h + 2);   // height low
879         decoder->reg[REG_ADDR(0x9b)] = HIBYTE(h + 2) & 0x0f;    // height high
880         decoder->reg[REG_ADDR(0x9c)] = LOBYTE(w);       // out width low
881         decoder->reg[REG_ADDR(0x9d)] = HIBYTE(w) & 0x0f;        // out width high
882         decoder->reg[REG_ADDR(0x9e)] = LOBYTE(h);       // out height low
883         decoder->reg[REG_ADDR(0x9f)] = HIBYTE(h) & 0x0f;        // out height high
884
885         decoder->reg[REG_ADDR(0xc4)] = LOBYTE(hoff);    // hoffset low
886         decoder->reg[REG_ADDR(0xc5)] = HIBYTE(hoff) & 0x0f;     // hoffset high
887         decoder->reg[REG_ADDR(0xc6)] = LOBYTE(w);       // width low
888         decoder->reg[REG_ADDR(0xc7)] = HIBYTE(w) & 0x0f;        // width high
889         decoder->reg[REG_ADDR(0xc8)] = LOBYTE(voff);    // voffset low
890         decoder->reg[REG_ADDR(0xc9)] = HIBYTE(voff) & 0x0f;     // voffset high
891         decoder->reg[REG_ADDR(0xca)] = LOBYTE(h + 2);   // height low
892         decoder->reg[REG_ADDR(0xcb)] = HIBYTE(h + 2) & 0x0f;    // height high
893         decoder->reg[REG_ADDR(0xcc)] = LOBYTE(w);       // out width low
894         decoder->reg[REG_ADDR(0xcd)] = HIBYTE(w) & 0x0f;        // out width high
895         decoder->reg[REG_ADDR(0xce)] = LOBYTE(h);       // out height low
896         decoder->reg[REG_ADDR(0xcf)] = HIBYTE(h) & 0x0f;        // out height high
897
898         decoder->reg[REG_ADDR(0xb8)] =
899             LOBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
900         decoder->reg[REG_ADDR(0xb9)] =
901             HIBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
902         decoder->reg[REG_ADDR(0xba)] =
903             LOBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
904         decoder->reg[REG_ADDR(0xbb)] =
905             HIBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
906
907         decoder->reg[REG_ADDR(0xbc)] =
908             LOBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
909         decoder->reg[REG_ADDR(0xbd)] =
910             HIBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
911         decoder->reg[REG_ADDR(0xbe)] =
912             LOBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
913         decoder->reg[REG_ADDR(0xbf)] =
914             HIBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
915
916         decoder->reg[REG_ADDR(0xe8)] =
917             LOBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
918         decoder->reg[REG_ADDR(0xe9)] =
919             HIBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
920         decoder->reg[REG_ADDR(0xea)] =
921             LOBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
922         decoder->reg[REG_ADDR(0xeb)] =
923             HIBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET));
924
925         decoder->reg[REG_ADDR(0xec)] =
926             LOBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
927         decoder->reg[REG_ADDR(0xed)] =
928             HIBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
929         decoder->reg[REG_ADDR(0xee)] =
930             LOBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
931         decoder->reg[REG_ADDR(0xef)] =
932             HIBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET));
933
934
935         decoder->reg[REG_ADDR(0x13)] = 0x80;    // RTC0 on
936         decoder->reg[REG_ADDR(0x87)] = 0x01;    // I-Port
937         decoder->reg[REG_ADDR(0x12)] = 0xc9;    // RTS0
938
939         decoder->reg[REG_ADDR(0x02)] = 0xc0;    // set composite1 input, aveasy
940         decoder->reg[REG_ADDR(0x09)] = 0x00;    // chrominance trap
941         decoder->reg[REG_ADDR(0x0e)] |= 1;      // combfilter on
942
943
944         dprintk(1, KERN_DEBUG "%s_attach: starting decoder init\n",
945                 I2C_NAME(client));
946
947         err[0] =
948             saa7114_write_block(client, decoder->reg + (0x20 << 1),
949                                 0x10 << 1);
950         err[1] =
951             saa7114_write_block(client, decoder->reg + (0x30 << 1),
952                                 0x10 << 1);
953         err[2] =
954             saa7114_write_block(client, decoder->reg + (0x63 << 1),
955                                 (0x7f + 1 - 0x63) << 1);
956         err[3] =
957             saa7114_write_block(client, decoder->reg + (0x89 << 1),
958                                 6 << 1);
959         err[4] =
960             saa7114_write_block(client, decoder->reg + (0xb8 << 1),
961                                 8 << 1);
962         err[5] =
963             saa7114_write_block(client, decoder->reg + (0xe8 << 1),
964                                 8 << 1);
965
966
967         for (i = 0; i <= 5; i++) {
968                 if (err[i] < 0) {
969                         dprintk(1,
970                                 KERN_ERR
971                                 "%s_attach: init error %d at stage %d, leaving attach.\n",
972                                 I2C_NAME(client), i, err[i]);
973                         kfree(decoder);
974                         kfree(client);
975                         return 0;
976                 }
977         }
978
979         for (i = 6; i < 8; i++) {
980                 dprintk(1,
981                         KERN_DEBUG
982                         "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n",
983                         I2C_NAME(client), i, saa7114_read(client, i),
984                         decoder->reg[REG_ADDR(i)]);
985         }
986
987         dprintk(1,
988                 KERN_DEBUG
989                 "%s_attach: performing decoder reset sequence\n",
990                 I2C_NAME(client));
991
992         err[6] = saa7114_write(client, 0x80, 0x06);     // i-port and scaler backend clock selection, task A&B off
993         err[7] = saa7114_write(client, 0x88, 0xd8);     // sw reset scaler
994         err[8] = saa7114_write(client, 0x88, 0xf8);     // sw reset scaler release
995
996         for (i = 6; i <= 8; i++) {
997                 if (err[i] < 0) {
998                         dprintk(1,
999                                 KERN_ERR
1000                                 "%s_attach: init error %d at stage %d, leaving attach.\n",
1001                                 I2C_NAME(client), i, err[i]);
1002                         kfree(decoder);
1003                         kfree(client);
1004                         return 0;
1005                 }
1006         }
1007
1008         dprintk(1, KERN_INFO "%s_attach: performing the rest of init\n",
1009                 I2C_NAME(client));
1010
1011
1012         err[9] = saa7114_write(client, 0x01, decoder->reg[REG_ADDR(0x01)]);
1013         err[10] = saa7114_write_block(client, decoder->reg + (0x03 << 1), (0x1e + 1 - 0x03) << 1);      // big seq
1014         err[11] = saa7114_write_block(client, decoder->reg + (0x40 << 1), (0x5f + 1 - 0x40) << 1);      // slicer
1015         err[12] = saa7114_write_block(client, decoder->reg + (0x81 << 1), 2 << 1);      // ?
1016         err[13] = saa7114_write_block(client, decoder->reg + (0x83 << 1), 5 << 1);      // ?
1017         err[14] = saa7114_write_block(client, decoder->reg + (0x90 << 1), 4 << 1);      // Task A
1018         err[15] =
1019             saa7114_write_block(client, decoder->reg + (0x94 << 1),
1020                                 12 << 1);
1021         err[16] =
1022             saa7114_write_block(client, decoder->reg + (0xa0 << 1),
1023                                 8 << 1);
1024         err[17] =
1025             saa7114_write_block(client, decoder->reg + (0xa8 << 1),
1026                                 8 << 1);
1027         err[18] =
1028             saa7114_write_block(client, decoder->reg + (0xb0 << 1),
1029                                 8 << 1);
1030         err[19] = saa7114_write_block(client, decoder->reg + (0xc0 << 1), 4 << 1);      // Task B
1031         err[15] =
1032             saa7114_write_block(client, decoder->reg + (0xc4 << 1),
1033                                 12 << 1);
1034         err[16] =
1035             saa7114_write_block(client, decoder->reg + (0xd0 << 1),
1036                                 8 << 1);
1037         err[17] =
1038             saa7114_write_block(client, decoder->reg + (0xd8 << 1),
1039                                 8 << 1);
1040         err[18] =
1041             saa7114_write_block(client, decoder->reg + (0xe0 << 1),
1042                                 8 << 1);
1043
1044         for (i = 9; i <= 18; i++) {
1045                 if (err[i] < 0) {
1046                         dprintk(1,
1047                                 KERN_ERR
1048                                 "%s_attach: init error %d at stage %d, leaving attach.\n",
1049                                 I2C_NAME(client), i, err[i]);
1050                         kfree(decoder);
1051                         kfree(client);
1052                         return 0;
1053                 }
1054         }
1055
1056
1057         for (i = 6; i < 8; i++) {
1058                 dprintk(1,
1059                         KERN_DEBUG
1060                         "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n",
1061                         I2C_NAME(client), i, saa7114_read(client, i),
1062                         decoder->reg[REG_ADDR(i)]);
1063         }
1064
1065
1066         for (i = 0x11; i <= 0x13; i++) {
1067                 dprintk(1,
1068                         KERN_DEBUG
1069                         "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n",
1070                         I2C_NAME(client), i, saa7114_read(client, i),
1071                         decoder->reg[REG_ADDR(i)]);
1072         }
1073
1074
1075         dprintk(1, KERN_DEBUG "%s_attach: setting video input\n",
1076                 I2C_NAME(client));
1077
1078         err[19] =
1079             saa7114_write(client, 0x02, decoder->reg[REG_ADDR(0x02)]);
1080         err[20] =
1081             saa7114_write(client, 0x09, decoder->reg[REG_ADDR(0x09)]);
1082         err[21] =
1083             saa7114_write(client, 0x0e, decoder->reg[REG_ADDR(0x0e)]);
1084
1085         for (i = 19; i <= 21; i++) {
1086                 if (err[i] < 0) {
1087                         dprintk(1,
1088                                 KERN_ERR
1089                                 "%s_attach: init error %d at stage %d, leaving attach.\n",
1090                                 I2C_NAME(client), i, err[i]);
1091                         kfree(decoder);
1092                         kfree(client);
1093                         return 0;
1094                 }
1095         }
1096
1097         dprintk(1,
1098                 KERN_DEBUG
1099                 "%s_attach: performing decoder reset sequence\n",
1100                 I2C_NAME(client));
1101
1102         err[22] = saa7114_write(client, 0x88, 0xd8);    // sw reset scaler
1103         err[23] = saa7114_write(client, 0x88, 0xf8);    // sw reset scaler release
1104         err[24] = saa7114_write(client, 0x80, 0x36);    // i-port and scaler backend clock selection, task A&B off
1105
1106
1107         for (i = 22; i <= 24; i++) {
1108                 if (err[i] < 0) {
1109                         dprintk(1,
1110                                 KERN_ERR
1111                                 "%s_attach: init error %d at stage %d, leaving attach.\n",
1112                                 I2C_NAME(client), i, err[i]);
1113                         kfree(decoder);
1114                         kfree(client);
1115                         return 0;
1116                 }
1117         }
1118
1119         err[25] = saa7114_write(client, 0x06, init[REG_ADDR(0x06)]);
1120         err[26] = saa7114_write(client, 0x07, init[REG_ADDR(0x07)]);
1121         err[27] = saa7114_write(client, 0x10, init[REG_ADDR(0x10)]);
1122
1123         dprintk(1,
1124                 KERN_INFO
1125                 "%s_attach: chip version %x, decoder status 0x%02x\n",
1126                 I2C_NAME(client), saa7114_read(client, 0x00) >> 4,
1127                 saa7114_read(client, 0x1f));
1128         dprintk(1,
1129                 KERN_DEBUG
1130                 "%s_attach: power save control: 0x%02x, scaler status: 0x%02x\n",
1131                 I2C_NAME(client), saa7114_read(client, 0x88),
1132                 saa7114_read(client, 0x8f));
1133
1134
1135         for (i = 0x94; i < 0x96; i++) {
1136                 dprintk(1,
1137                         KERN_DEBUG
1138                         "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n",
1139                         I2C_NAME(client), i, saa7114_read(client, i),
1140                         decoder->reg[REG_ADDR(i)]);
1141         }
1142
1143         i = i2c_attach_client(client);
1144         if (i) {
1145                 kfree(client);
1146                 kfree(decoder);
1147                 return i;
1148         }
1149
1150         //i = saa7114_write_block(client, init, sizeof(init));
1151         i = 0;
1152         if (i < 0) {
1153                 dprintk(1, KERN_ERR "%s_attach error: init status %d\n",
1154                         I2C_NAME(client), i);
1155         } else {
1156                 dprintk(1,
1157                         KERN_INFO
1158                         "%s_attach: chip version %x at address 0x%x\n",
1159                         I2C_NAME(client), saa7114_read(client, 0x00) >> 4,
1160                         client->addr << 1);
1161         }
1162
1163         return 0;
1164 }
1165
1166 static int
1167 saa7114_attach_adapter (struct i2c_adapter *adapter)
1168 {
1169         dprintk(1,
1170                 KERN_INFO
1171                 "saa7114.c: starting probe for adapter %s (0x%x)\n",
1172                 I2C_NAME(adapter), adapter->id);
1173         return i2c_probe(adapter, &addr_data, &saa7114_detect_client);
1174 }
1175
1176 static int
1177 saa7114_detach_client (struct i2c_client *client)
1178 {
1179         struct saa7114 *decoder = i2c_get_clientdata(client);
1180         int err;
1181
1182         err = i2c_detach_client(client);
1183         if (err) {
1184                 return err;
1185         }
1186
1187         kfree(decoder);
1188         kfree(client);
1189
1190         return 0;
1191 }
1192
1193 /* ----------------------------------------------------------------------- */
1194
1195 static struct i2c_driver i2c_driver_saa7114 = {
1196         .driver = {
1197                 .name = "saa7114",
1198         },
1199
1200         .id = I2C_DRIVERID_SAA7114,
1201
1202         .attach_adapter = saa7114_attach_adapter,
1203         .detach_client = saa7114_detach_client,
1204         .command = saa7114_command,
1205 };
1206
1207 static int __init
1208 saa7114_init (void)
1209 {
1210         return i2c_add_driver(&i2c_driver_saa7114);
1211 }
1212
1213 static void __exit
1214 saa7114_exit (void)
1215 {
1216         i2c_del_driver(&i2c_driver_saa7114);
1217 }
1218
1219 module_init(saa7114_init);
1220 module_exit(saa7114_exit);