git.oblomov.eu Git - linux-2.6/blob - arch/ppc/platforms/4xx/bamboo.c

   1 /*
   2  * arch/ppc/platforms/4xx/bamboo.c
   3  *
   4  * Bamboo board specific routines
   5  *
   6  * Wade Farnsworth <wfarnsworth@mvista.com>
   7  * Copyright 2004 MontaVista Software Inc.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 #include <linux/config.h>
  16 #include <linux/stddef.h>
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/errno.h>
  20 #include <linux/reboot.h>
  21 #include <linux/pci.h>
  22 #include <linux/kdev_t.h>
  23 #include <linux/types.h>
  24 #include <linux/major.h>
  25 #include <linux/blkdev.h>
  26 #include <linux/console.h>
  27 #include <linux/delay.h>
  28 #include <linux/ide.h>
  29 #include <linux/initrd.h>
  30 #include <linux/irq.h>
  31 #include <linux/seq_file.h>
  32 #include <linux/root_dev.h>
  33 #include <linux/tty.h>
  34 #include <linux/serial.h>
  35 #include <linux/serial_core.h>
  36 #include <linux/ethtool.h>
  37
  38 #include <asm/system.h>
  39 #include <asm/pgtable.h>
  40 #include <asm/page.h>
  41 #include <asm/dma.h>
  42 #include <asm/io.h>
  43 #include <asm/machdep.h>
  44 #include <asm/ocp.h>
  45 #include <asm/pci-bridge.h>
  46 #include <asm/time.h>
  47 #include <asm/todc.h>
  48 #include <asm/bootinfo.h>
  49 #include <asm/ppc4xx_pic.h>
  50 #include <asm/ppcboot.h>
  51
  52 #include <syslib/gen550.h>
  53 #include <syslib/ibm440gx_common.h>
  54
  55 bd_t __res;
  56
  57 static struct ibm44x_clocks clocks __initdata;
  58
  59 /*
  60  * Bamboo external IRQ triggering/polarity settings
  61  */
  62 unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
  63         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
  64         (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
  65         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
  66         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
  67         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
  68         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
  69         (IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
  70         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
  71         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
  72         (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
  73 };
  74
  75 static void __init
  76 bamboo_calibrate_decr(void)
  77 {
  78         unsigned int freq;
  79
  80         if (mfspr(SPRN_CCR1) & CCR1_TCS)
  81                 freq = BAMBOO_TMRCLK;
  82         else
  83                 freq = clocks.cpu;
  84
  85         ibm44x_calibrate_decr(freq);
  86
  87 }
  88
  89 static int
  90 bamboo_show_cpuinfo(struct seq_file *m)
  91 {
  92         seq_printf(m, "vendor\t\t: IBM\n");
  93         seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
  94
  95         return 0;
  96 }
  97
  98 static inline int
  99 bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 100 {
 101         static char pci_irq_table[][4] =
 102         /*
 103          *      PCI IDSEL/INTPIN->INTLINE
 104          *         A   B   C   D
 105          */
 106         {
 107                 { 28, 28, 28, 28 },     /* IDSEL 1 - PCI Slot 0 */
 108                 { 27, 27, 27, 27 },     /* IDSEL 2 - PCI Slot 1 */
 109                 { 26, 26, 26, 26 },     /* IDSEL 3 - PCI Slot 2 */
 110                 { 25, 25, 25, 25 },     /* IDSEL 4 - PCI Slot 3 */
 111         };
 112
 113         const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
 114         return PCI_IRQ_TABLE_LOOKUP;
 115 }
 116
 117 static void __init bamboo_set_emacdata(void)
 118 {
 119         u8 * base_addr;
 120         struct ocp_def *def;
 121         struct ocp_func_emac_data *emacdata;
 122         u8 val;
 123         int mode;
 124         u32 excluded = 0;
 125
 126         base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
 127         val = readb(base_addr);
 128         iounmap((void *) base_addr);
 129         if (BAMBOO_SEL_MII(val))
 130                 mode = PHY_MODE_MII;
 131         else if (BAMBOO_SEL_RMII(val))
 132                 mode = PHY_MODE_RMII;
 133         else
 134                 mode = PHY_MODE_SMII;
 135
 136         /*
 137          * SW2 on the Bamboo is used for ethernet configuration and is accessed
 138          * via the CONFIG2 register in the FPGA.  If the ANEG pin is set,
 139          * overwrite the supported features with the settings in SW2.
 140          *
 141          * This is used as a workaround for the improperly biased RJ-45 sockets
 142          * on the Rev. 0 Bamboo.  By default only 10baseT is functional.
 143          * Removing inductors L17 and L18 from the board allows 100baseT, but
 144          * disables 10baseT.  The Rev. 1 has no such limitations.
 145          */
 146
 147         base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8);
 148         val = readb(base_addr);
 149         iounmap((void *) base_addr);
 150         if (!BAMBOO_AUTONEGOTIATE(val)) {
 151                 excluded |= SUPPORTED_Autoneg;
 152                 if (BAMBOO_FORCE_100Mbps(val)) {
 153                         excluded |= SUPPORTED_10baseT_Full;
 154                         excluded |= SUPPORTED_10baseT_Half;
 155                         if (BAMBOO_FULL_DUPLEX_EN(val))
 156                                 excluded |= SUPPORTED_100baseT_Half;
 157                         else
 158                                 excluded |= SUPPORTED_100baseT_Full;
 159                 } else {
 160                         excluded |= SUPPORTED_100baseT_Full;
 161                         excluded |= SUPPORTED_100baseT_Half;
 162                         if (BAMBOO_FULL_DUPLEX_EN(val))
 163                                 excluded |= SUPPORTED_10baseT_Half;
 164                         else
 165                                 excluded |= SUPPORTED_10baseT_Full;
 166                 }
 167         }
 168
 169         /* Set mac_addr, phy mode and unsupported phy features for each EMAC */
 170
 171         def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
 172         emacdata = def->additions;
 173         memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
 174         emacdata->phy_mode = mode;
 175         emacdata->phy_feat_exc = excluded;
 176
 177         def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
 178         emacdata = def->additions;
 179         memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
 180         emacdata->phy_mode = mode;
 181         emacdata->phy_feat_exc = excluded;
 182 }
 183
 184 static int
 185 bamboo_exclude_device(unsigned char bus, unsigned char devfn)
 186 {
 187         return (bus == 0 && devfn == 0);
 188 }
 189
 190 #define PCI_READW(offset) \
 191         (readw((void *)((u32)pci_reg_base+offset)))
 192
 193 #define PCI_WRITEW(value, offset) \
 194         (writew(value, (void *)((u32)pci_reg_base+offset)))
 195
 196 #define PCI_WRITEL(value, offset) \
 197         (writel(value, (void *)((u32)pci_reg_base+offset)))
 198
 199 static void __init
 200 bamboo_setup_pci(void)
 201 {
 202         void *pci_reg_base;
 203         unsigned long memory_size;
 204         memory_size = ppc_md.find_end_of_memory();
 205
 206         pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
 207
 208         /* Enable PCI I/O, Mem, and Busmaster cycles */
 209         PCI_WRITEW(PCI_READW(PCI_COMMAND) |
 210                    PCI_COMMAND_MEMORY |
 211                    PCI_COMMAND_MASTER, PCI_COMMAND);
 212
 213         /* Disable region first */
 214         PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
 215
 216         /* PLB starting addr: 0x00000000A0000000 */
 217         PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
 218
 219         /* PCI start addr, 0xA0000000 (PCI Address) */
 220         PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
 221         PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
 222
 223         /* Enable no pre-fetch, enable region */
 224         PCI_WRITEL(((0xffffffff -
 225                      (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
 226                       BAMBOO_PCIL0_PMM0MA);
 227
 228         /* Disable region one */
 229         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
 230         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
 231         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
 232         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
 233         PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
 234
 235         /* Disable region two */
 236         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
 237         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
 238         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
 239         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
 240         PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
 241
 242         /* Now configure the PCI->PLB windows, we only use PTM1
 243          *
 244          * For Inbound flow, set the window size to all available memory
 245          * This is required because if size is smaller,
 246          * then Eth/PCI DD would fail as PCI card not able to access
 247          * the memory allocated by DD.
 248          */
 249
 250         PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);     /* disabled region 1 */
 251         PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);     /* begin of address map */
 252
 253         memory_size = 1 << fls(memory_size - 1);
 254
 255         /* Size low + Enabled */
 256         PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
 257
 258         eieio();
 259         iounmap(pci_reg_base);
 260 }
 261
 262 static void __init
 263 bamboo_setup_hose(void)
 264 {
 265         unsigned int bar_response, bar;
 266         struct pci_controller *hose;
 267
 268         bamboo_setup_pci();
 269
 270         hose = pcibios_alloc_controller();
 271
 272         if (!hose)
 273                 return;
 274
 275         hose->first_busno = 0;
 276         hose->last_busno = 0xff;
 277
 278         hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
 279
 280         pci_init_resource(&hose->io_resource,
 281                         BAMBOO_PCI_LOWER_IO,
 282                         BAMBOO_PCI_UPPER_IO,
 283                         IORESOURCE_IO,
 284                         "PCI host bridge");
 285
 286         pci_init_resource(&hose->mem_resources[0],
 287                         BAMBOO_PCI_LOWER_MEM,
 288                         BAMBOO_PCI_UPPER_MEM,
 289                         IORESOURCE_MEM,
 290                         "PCI host bridge");
 291
 292         ppc_md.pci_exclude_device = bamboo_exclude_device;
 293
 294         hose->io_space.start = BAMBOO_PCI_LOWER_IO;
 295         hose->io_space.end = BAMBOO_PCI_UPPER_IO;
 296         hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
 297         hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
 298         isa_io_base =
 299                 (unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
 300         hose->io_base_virt = (void *)isa_io_base;
 301
 302         setup_indirect_pci(hose,
 303                         BAMBOO_PCI_CFGA_PLB32,
 304                         BAMBOO_PCI_CFGD_PLB32);
 305         hose->set_cfg_type = 1;
 306
 307         /* Zero config bars */
 308         for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
 309                 early_write_config_dword(hose, hose->first_busno,
 310                                          PCI_FUNC(hose->first_busno), bar,
 311                                          0x00000000);
 312                 early_read_config_dword(hose, hose->first_busno,
 313                                         PCI_FUNC(hose->first_busno), bar,
 314                                         &bar_response);
 315         }
 316
 317         hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
 318
 319         ppc_md.pci_swizzle = common_swizzle;
 320         ppc_md.pci_map_irq = bamboo_map_irq;
 321 }
 322
 323 TODC_ALLOC();
 324
 325 static void __init
 326 bamboo_early_serial_map(void)
 327 {
 328         struct uart_port port;
 329
 330         /* Setup ioremapped serial port access */
 331         memset(&port, 0, sizeof(port));
 332         port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
 333         port.irq = 0;
 334         port.uartclk = clocks.uart0;
 335         port.regshift = 0;
 336         port.iotype = SERIAL_IO_MEM;
 337         port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
 338         port.line = 0;
 339
 340         if (early_serial_setup(&port) != 0) {
 341                 printk("Early serial init of port 0 failed\n");
 342         }
 343
 344 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 345         /* Configure debug serial access */
 346         gen550_init(0, &port);
 347 #endif
 348
 349         port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
 350         port.irq = 1;
 351         port.uartclk = clocks.uart1;
 352         port.line = 1;
 353
 354         if (early_serial_setup(&port) != 0) {
 355                 printk("Early serial init of port 1 failed\n");
 356         }
 357
 358 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 359         /* Configure debug serial access */
 360         gen550_init(1, &port);
 361 #endif
 362
 363         port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
 364         port.irq = 3;
 365         port.uartclk = clocks.uart2;
 366         port.line = 2;
 367
 368         if (early_serial_setup(&port) != 0) {
 369                 printk("Early serial init of port 2 failed\n");
 370         }
 371
 372 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
 373         /* Configure debug serial access */
 374         gen550_init(2, &port);
 375 #endif
 376
 377         port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
 378         port.irq = 4;
 379         port.uartclk = clocks.uart3;
 380         port.line = 3;
 381
 382         if (early_serial_setup(&port) != 0) {
 383                 printk("Early serial init of port 3 failed\n");
 384         }
 385 }
 386
 387 static void __init
 388 bamboo_setup_arch(void)
 389 {
 390
 391         bamboo_set_emacdata();
 392
 393         ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
 394         ocp_sys_info.opb_bus_freq = clocks.opb;
 395
 396         /* Setup TODC access */
 397         TODC_INIT(TODC_TYPE_DS1743,
 398                         0,
 399                         0,
 400                         ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
 401                         8);
 402
 403         /* init to some ~sane value until calibrate_delay() runs */
 404         loops_per_jiffy = 50000000/HZ;
 405
 406         /* Setup PCI host bridge */
 407         bamboo_setup_hose();
 408
 409 #ifdef CONFIG_BLK_DEV_INITRD
 410         if (initrd_start)
 411                 ROOT_DEV = Root_RAM0;
 412         else
 413 #endif
 414 #ifdef CONFIG_ROOT_NFS
 415                 ROOT_DEV = Root_NFS;
 416 #else
 417                 ROOT_DEV = Root_HDA1;
 418 #endif
 419
 420         bamboo_early_serial_map();
 421
 422         /* Identify the system */
 423         printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
 424 }
 425
 426 void __init platform_init(unsigned long r3, unsigned long r4,
 427                 unsigned long r5, unsigned long r6, unsigned long r7)
 428 {
 429         parse_bootinfo(find_bootinfo());
 430
 431         /*
 432          * If we were passed in a board information, copy it into the
 433          * residual data area.
 434          */
 435         if (r3)
 436                 __res = *(bd_t *)(r3 + KERNELBASE);
 437
 438
 439         ibm44x_platform_init();
 440
 441         ppc_md.setup_arch = bamboo_setup_arch;
 442         ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
 443         ppc_md.get_irq = NULL;          /* Set in ppc4xx_pic_init() */
 444
 445         ppc_md.calibrate_decr = bamboo_calibrate_decr;
 446         ppc_md.time_init = todc_time_init;
 447         ppc_md.set_rtc_time = todc_set_rtc_time;
 448         ppc_md.get_rtc_time = todc_get_rtc_time;
 449
 450         ppc_md.nvram_read_val = todc_direct_read_val;
 451         ppc_md.nvram_write_val = todc_direct_write_val;
 452 #ifdef CONFIG_KGDB
 453         ppc_md.early_serial_map = bamboo_early_serial_map;
 454 #endif
 455 }
 456