git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-pxa/leds-trizeps4.c

   1 /*
   2  * linux/arch/arm/mach-pxa/leds-trizeps4.c
   3  *
   4  *  Author:     Jürgen Schindele
   5  *  Created:    20 02, 2006
   6  *  Copyright:  Jürgen Schindele
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/init.h>
  14
  15 #include <asm/hardware.h>
  16 #include <asm/system.h>
  17 #include <asm/types.h>
  18 #include <asm/leds.h>
  19
  20 #include <asm/arch/pxa-regs.h>
  21 #include <asm/arch/trizeps4.h>
  22
  23 #include "leds.h"
  24
  25 #define LED_STATE_ENABLED       1
  26 #define LED_STATE_CLAIMED       2
  27
  28 #define SYS_BUSY                0x01
  29 #define HEARTBEAT               0x02
  30 #define BLINK                   0x04
  31
  32 static unsigned int led_state;
  33 static unsigned int hw_led_state;
  34
  35 void trizeps4_leds_event(led_event_t evt)
  36 {
  37         unsigned long flags;
  38
  39         local_irq_save(flags);
  40
  41         switch (evt) {
  42         case led_start:
  43                 hw_led_state = 0;
  44                 pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
  45                 pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
  46                 led_state = LED_STATE_ENABLED;
  47                 break;
  48
  49         case led_stop:
  50                 led_state &= ~LED_STATE_ENABLED;
  51                 break;
  52
  53         case led_claim:
  54                 led_state |= LED_STATE_CLAIMED;
  55                 hw_led_state = 0;
  56                 break;
  57
  58         case led_release:
  59                 led_state &= ~LED_STATE_CLAIMED;
  60                 hw_led_state = 0;
  61                 break;
  62
  63 #ifdef CONFIG_LEDS_TIMER
  64         case led_timer:
  65                 hw_led_state ^= HEARTBEAT;
  66                 break;
  67 #endif
  68
  69 #ifdef CONFIG_LEDS_CPU
  70         case led_idle_start:
  71                 hw_led_state &= ~SYS_BUSY;
  72                 break;
  73
  74         case led_idle_end:
  75                 hw_led_state |= SYS_BUSY;
  76                 break;
  77 #endif
  78
  79         case led_halted:
  80                 break;
  81
  82         case led_green_on:
  83                 hw_led_state |= BLINK;
  84                 break;
  85
  86         case led_green_off:
  87                 hw_led_state &= ~BLINK;
  88                 break;
  89
  90         case led_amber_on:
  91                 break;
  92
  93         case led_amber_off:
  94                 break;
  95
  96         case led_red_on:
  97                 break;
  98
  99         case led_red_off:
 100                 break;
 101
 102         default:
 103                 break;
 104         }
 105
 106         if  (led_state & LED_STATE_ENABLED) {
 107                 switch (hw_led_state) {
 108                         case 0:
 109                                 GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
 110                                 GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
 111                                 break;
 112                         case 1:
 113                                 GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
 114                                 GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
 115                                 break;
 116                         case 2:
 117                                 GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
 118                                 GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
 119                                 break;
 120                         case 3:
 121                                 GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
 122                                 GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
 123                                 break;
 124                 }
 125         }
 126         else {
 127                 /* turn all off */
 128                 GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
 129                 GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
 130         }
 131
 132         local_irq_restore(flags);
 133 }