1 /*******************************************************************************
4 Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms of the GNU General Public License as published by the Free
8 Software Foundation; either version 2 of the License, or (at your option)
11 This program is distributed in the hope that it will be useful, but WITHOUT
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 You should have received a copy of the GNU General Public License along with
17 this program; if not, write to the Free Software Foundation, Inc., 59
18 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20 The full GNU General Public License is included in this distribution in the
24 Linux NICS <linux.nics@intel.com>
25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *******************************************************************************/
30 /* Linux PRO/1000 Ethernet Driver main header file */
35 #include <linux/stddef.h>
36 #include <linux/config.h>
37 #include <linux/module.h>
38 #include <linux/types.h>
39 #include <asm/byteorder.h>
40 #include <linux/init.h>
42 #include <linux/errno.h>
43 #include <linux/ioport.h>
44 #include <linux/pci.h>
45 #include <linux/kernel.h>
46 #include <linux/netdevice.h>
47 #include <linux/etherdevice.h>
48 #include <linux/skbuff.h>
49 #include <linux/delay.h>
50 #include <linux/timer.h>
51 #include <linux/slab.h>
52 #include <linux/vmalloc.h>
53 #include <linux/interrupt.h>
54 #include <linux/string.h>
55 #include <linux/pagemap.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/bitops.h>
60 #include <linux/capability.h>
63 #include <linux/tcp.h>
64 #include <linux/udp.h>
65 #include <net/pkt_sched.h>
66 #include <linux/list.h>
67 #include <linux/reboot.h>
69 #include <net/checksum.h>
71 #include <linux/workqueue.h>
72 #include <linux/mii.h>
73 #include <linux/ethtool.h>
74 #include <linux/if_vlan.h>
80 #define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
81 PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
88 #define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
90 #define E1000_DBG(args...)
93 #define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
96 #define DPRINTK(nlevel, klevel, fmt, args...) \
97 (void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
98 printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
99 __FUNCTION__ , ## args))
101 #define E1000_MAX_INTR 10
103 /* TX/RX descriptor defines */
104 #define E1000_DEFAULT_TXD 256
105 #define E1000_MAX_TXD 256
106 #define E1000_MIN_TXD 80
107 #define E1000_MAX_82544_TXD 4096
109 #define E1000_DEFAULT_RXD 256
110 #define E1000_MAX_RXD 256
111 #define E1000_MIN_RXD 80
112 #define E1000_MAX_82544_RXD 4096
114 /* Supported Rx Buffer Sizes */
115 #define E1000_RXBUFFER_128 128 /* Used for packet split */
116 #define E1000_RXBUFFER_256 256 /* Used for packet split */
117 #define E1000_RXBUFFER_2048 2048
118 #define E1000_RXBUFFER_4096 4096
119 #define E1000_RXBUFFER_8192 8192
120 #define E1000_RXBUFFER_16384 16384
122 /* SmartSpeed delimiters */
123 #define E1000_SMARTSPEED_DOWNSHIFT 3
124 #define E1000_SMARTSPEED_MAX 15
126 /* Packet Buffer allocations */
127 #define E1000_PBA_BYTES_SHIFT 0xA
128 #define E1000_TX_HEAD_ADDR_SHIFT 7
129 #define E1000_PBA_TX_MASK 0xFFFF0000
131 /* Flow Control Watermarks */
132 #define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
133 #define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
135 #define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
137 /* How many Tx Descriptors do we need to call netif_wake_queue ? */
138 #define E1000_TX_QUEUE_WAKE 16
139 /* How many Rx Buffers do we bundle into one write to the hardware ? */
140 #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
142 #define AUTO_ALL_MODES 0
143 #define E1000_EEPROM_82544_APM 0x0004
144 #define E1000_EEPROM_APME 0x0400
146 #ifndef E1000_MASTER_SLAVE
147 /* Switch to override PHY master/slave setting */
148 #define E1000_MASTER_SLAVE e1000_ms_hw_default
151 #define E1000_MNG_VLAN_NONE -1
152 /* Number of packet split data buffers (not including the header buffer) */
153 #define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
155 /* only works for sizes that are powers of 2 */
156 #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
158 /* wrapper around a pointer to a socket buffer,
159 * so a DMA handle can be stored along with the buffer */
160 struct e1000_buffer {
163 unsigned long time_stamp;
165 uint16_t next_to_watch;
168 struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; };
169 struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; };
171 struct e1000_desc_ring {
172 /* pointer to the descriptor ring memory */
174 /* physical address of the descriptor ring */
176 /* length of descriptor ring in bytes */
178 /* number of descriptors in the ring */
180 /* next descriptor to associate a buffer with */
181 unsigned int next_to_use;
182 /* next descriptor to check for DD status bit */
183 unsigned int next_to_clean;
184 /* array of buffer information structs */
185 struct e1000_buffer *buffer_info;
186 /* arrays of page information for packet split */
187 struct e1000_ps_page *ps_page;
188 struct e1000_ps_page_dma *ps_page_dma;
191 #define E1000_DESC_UNUSED(R) \
192 ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
193 (R)->next_to_clean - (R)->next_to_use - 1)
195 #define E1000_RX_DESC_PS(R, i) \
196 (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
197 #define E1000_RX_DESC_EXT(R, i) \
198 (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
199 #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
200 #define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
201 #define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
202 #define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
204 /* board specific private data structure */
206 struct e1000_adapter {
207 struct timer_list tx_fifo_stall_timer;
208 struct timer_list watchdog_timer;
209 struct timer_list phy_info_timer;
210 struct vlan_group *vlgrp;
211 uint16_t mng_vlan_id;
213 uint32_t rx_buffer_len;
219 uint16_t link_duplex;
220 spinlock_t stats_lock;
222 struct work_struct tx_timeout_task;
223 struct work_struct watchdog_task;
226 struct timer_list blink_timer;
227 unsigned long led_status;
230 struct e1000_desc_ring tx_ring;
231 struct e1000_buffer previous_buffer_info;
234 uint32_t tx_int_delay;
235 uint32_t tx_abs_int_delay;
240 uint32_t tx_fifo_head;
241 uint32_t tx_head_addr;
242 uint32_t tx_fifo_size;
243 atomic_t tx_fifo_stall;
244 boolean_t pcix_82544;
245 boolean_t detect_tx_hung;
248 #ifdef CONFIG_E1000_NAPI
249 boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done,
252 boolean_t (*clean_rx) (struct e1000_adapter *adapter);
254 void (*alloc_rx_buf) (struct e1000_adapter *adapter);
255 struct e1000_desc_ring rx_ring;
256 uint64_t hw_csum_err;
257 uint64_t hw_csum_good;
258 uint32_t rx_int_delay;
259 uint32_t rx_abs_int_delay;
264 uint16_t rx_ps_bsize0;
266 /* Interrupt Throttle Rate */
269 /* OS defined structs */
270 struct net_device *netdev;
271 struct pci_dev *pdev;
272 struct net_device_stats net_stats;
274 /* structs defined in e1000_hw.h */
276 struct e1000_hw_stats stats;
277 struct e1000_phy_info phy_info;
278 struct e1000_phy_stats phy_stats;
281 struct e1000_desc_ring test_tx_ring;
282 struct e1000_desc_ring test_rx_ring;
286 #ifdef CONFIG_PCI_MSI
290 #endif /* _E1000_H_ */