2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
26 * http://www.ivtvdriver.org
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-gpio.h"
58 #include <media/tveeprom.h>
59 #include <media/saa7115.h>
60 #include <media/v4l2-chip-ident.h>
61 #include "tuner-xc2028.h"
63 /* If you have already X v4l cards, then set this to X. This way
64 the device numbers stay matched. Example: you have a WinTV card
65 without radio and a PVR-350 with. Normally this would give a
66 video1 device together with a radio0 device for the PVR. By
67 setting this to 1 you ensure that radio0 is now also radio1. */
70 /* add your revision and whatnot here */
71 static struct pci_device_id ivtv_pci_tbl[] __devinitdata = {
72 {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV15,
73 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
74 {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV16,
75 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
79 MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl);
81 /* ivtv instance counter */
82 static atomic_t ivtv_instance = ATOMIC_INIT(0);
84 /* Parameter declarations */
85 static int cardtype[IVTV_MAX_CARDS];
86 static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
87 -1, -1, -1, -1, -1, -1, -1, -1,
88 -1, -1, -1, -1, -1, -1, -1, -1,
89 -1, -1, -1, -1, -1, -1, -1, -1 };
90 static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
91 -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1 };
95 static unsigned int cardtype_c = 1;
96 static unsigned int tuner_c = 1;
97 static unsigned int radio_c = 1;
98 static char pal[] = "---";
99 static char secam[] = "--";
100 static char ntsc[] = "-";
104 /* DMA Buffers, Default size in MB allocated */
105 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
106 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
107 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
108 /* Exception: size in kB for this stream (MB is overkill) */
109 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
110 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
111 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
112 /* Exception: size in kB for this stream (MB is way overkill) */
113 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
115 static int enc_mpg_buffers = IVTV_DEFAULT_ENC_MPG_BUFFERS;
116 static int enc_yuv_buffers = IVTV_DEFAULT_ENC_YUV_BUFFERS;
117 static int enc_vbi_buffers = IVTV_DEFAULT_ENC_VBI_BUFFERS;
118 static int enc_pcm_buffers = IVTV_DEFAULT_ENC_PCM_BUFFERS;
119 static int dec_mpg_buffers = IVTV_DEFAULT_DEC_MPG_BUFFERS;
120 static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS;
121 static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS;
123 static int ivtv_yuv_mode;
124 static int ivtv_yuv_threshold = -1;
125 static int ivtv_pci_latency = 1;
129 static int tunertype = -1;
130 static int newi2c = -1;
132 module_param_array(tuner, int, &tuner_c, 0644);
133 module_param_array(radio, bool, &radio_c, 0644);
134 module_param_array(cardtype, int, &cardtype_c, 0644);
135 module_param_string(pal, pal, sizeof(pal), 0644);
136 module_param_string(secam, secam, sizeof(secam), 0644);
137 module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
138 module_param_named(debug,ivtv_debug, int, 0644);
139 module_param(ivtv_pci_latency, int, 0644);
140 module_param(ivtv_yuv_mode, int, 0644);
141 module_param(ivtv_yuv_threshold, int, 0644);
142 module_param(ivtv_first_minor, int, 0644);
144 module_param(enc_mpg_buffers, int, 0644);
145 module_param(enc_yuv_buffers, int, 0644);
146 module_param(enc_vbi_buffers, int, 0644);
147 module_param(enc_pcm_buffers, int, 0644);
148 module_param(dec_mpg_buffers, int, 0644);
149 module_param(dec_yuv_buffers, int, 0644);
150 module_param(dec_vbi_buffers, int, 0644);
152 module_param(tunertype, int, 0644);
153 module_param(newi2c, int, 0644);
155 MODULE_PARM_DESC(tuner, "Tuner type selection,\n"
156 "\t\t\tsee tuner.h for values");
157 MODULE_PARM_DESC(radio,
158 "Enable or disable the radio. Use only if autodetection\n"
159 "\t\t\tfails. 0 = disable, 1 = enable");
160 MODULE_PARM_DESC(cardtype,
161 "Only use this option if your card is not detected properly.\n"
162 "\t\tSpecify card type:\n"
163 "\t\t\t 1 = WinTV PVR 250\n"
164 "\t\t\t 2 = WinTV PVR 350\n"
165 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
166 "\t\t\t 4 = AVerMedia M179\n"
167 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
168 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
169 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
170 "\t\t\t 8 = Adaptec AVC-2410\n"
171 "\t\t\t 9 = Adaptec AVC-2010\n"
172 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
173 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
174 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
175 "\t\t\t13 = I/O Data GV-MVP/RX\n"
176 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
177 "\t\t\t15 = GOTVIEW PCI DVD\n"
178 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
179 "\t\t\t17 = Yuan MPC622\n"
180 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
181 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
182 "\t\t\t20 = Club3D ZAP-TV1x01\n"
183 "\t\t\t21 = AverTV MCE 116 Plus\n"
184 "\t\t\t22 = ASUS Falcon2\n"
185 "\t\t\t23 = AverMedia PVR-150 Plus\n"
186 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
187 "\t\t\t25 = AverMedia M104 (not yet working)\n"
188 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
189 "\t\t\t 0 = Autodetect (default)\n"
190 "\t\t\t-1 = Ignore this card\n\t\t");
191 MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
192 MODULE_PARM_DESC(secam, "Set SECAM standard: BGH, DK, L, LC");
193 MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J (Japan), K (South Korea)");
194 MODULE_PARM_DESC(tunertype,
195 "Specify tuner type:\n"
196 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
197 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
198 "\t\t\t-1 = Autodetect (default)\n");
199 MODULE_PARM_DESC(debug,
200 "Debug level (bitmask). Default: 0\n"
201 "\t\t\t 1/0x0001: warning\n"
202 "\t\t\t 2/0x0002: info\n"
203 "\t\t\t 4/0x0004: mailbox\n"
204 "\t\t\t 8/0x0008: ioctl\n"
205 "\t\t\t 16/0x0010: file\n"
206 "\t\t\t 32/0x0020: dma\n"
207 "\t\t\t 64/0x0040: irq\n"
208 "\t\t\t 128/0x0080: decoder\n"
209 "\t\t\t 256/0x0100: yuv\n"
210 "\t\t\t 512/0x0200: i2c\n"
211 "\t\t\t1024/0x0400: high volume\n");
212 MODULE_PARM_DESC(ivtv_pci_latency,
213 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
214 "\t\t\tDefault: Yes");
215 MODULE_PARM_DESC(ivtv_yuv_mode,
216 "Specify the yuv playback mode:\n"
217 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
218 "\t\t\tDefault: 0 (interlaced)");
219 MODULE_PARM_DESC(ivtv_yuv_threshold,
220 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
221 "\t\t\tDefault: 480");;
222 MODULE_PARM_DESC(enc_mpg_buffers,
223 "Encoder MPG Buffers (in MB)\n"
224 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS));
225 MODULE_PARM_DESC(enc_yuv_buffers,
226 "Encoder YUV Buffers (in MB)\n"
227 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS));
228 MODULE_PARM_DESC(enc_vbi_buffers,
229 "Encoder VBI Buffers (in MB)\n"
230 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS));
231 MODULE_PARM_DESC(enc_pcm_buffers,
232 "Encoder PCM buffers (in kB)\n"
233 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS));
234 MODULE_PARM_DESC(dec_mpg_buffers,
235 "Decoder MPG buffers (in MB)\n"
236 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS));
237 MODULE_PARM_DESC(dec_yuv_buffers,
238 "Decoder YUV buffers (in MB)\n"
239 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS));
240 MODULE_PARM_DESC(dec_vbi_buffers,
241 "Decoder VBI buffers (in kB)\n"
242 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS));
243 MODULE_PARM_DESC(newi2c,
244 "Use new I2C implementation\n"
245 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
246 "\t\t\tDefault is autodetect");
248 MODULE_PARM_DESC(ivtv_first_minor, "Set kernel number assigned to first card");
250 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
251 MODULE_DESCRIPTION("CX23415/CX23416 driver");
252 MODULE_SUPPORTED_DEVICE
253 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
254 "\t\t\tYuan MPG series and similar)");
255 MODULE_LICENSE("GPL");
257 MODULE_VERSION(IVTV_VERSION);
259 void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask)
261 itv->irqmask &= ~mask;
262 write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK);
265 void ivtv_set_irq_mask(struct ivtv *itv, u32 mask)
267 itv->irqmask |= mask;
268 write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK);
271 int ivtv_set_output_mode(struct ivtv *itv, int mode)
275 spin_lock(&itv->lock);
276 old_mode = itv->output_mode;
278 itv->output_mode = old_mode = mode;
279 spin_unlock(&itv->lock);
283 struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv)
285 switch (itv->output_mode) {
287 return &itv->streams[IVTV_DEC_STREAM_TYPE_MPG];
289 return &itv->streams[IVTV_DEC_STREAM_TYPE_YUV];
295 int ivtv_waitq(wait_queue_head_t *waitq)
299 prepare_to_wait(waitq, &wait, TASK_INTERRUPTIBLE);
301 finish_wait(waitq, &wait);
302 return signal_pending(current) ? -EINTR : 0;
305 /* Generic utility functions */
306 int ivtv_msleep_timeout(unsigned int msecs, int intr)
309 int timeout = msecs_to_jiffies(msecs);
312 set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
313 timeout = schedule_timeout(timeout);
314 if (intr && (ret = signal_pending(current)))
320 /* Release ioremapped memory */
321 static void ivtv_iounmap(struct ivtv *itv)
326 /* Release registers memory */
327 if (itv->reg_mem != NULL) {
328 IVTV_DEBUG_INFO("releasing reg_mem\n");
329 iounmap(itv->reg_mem);
332 /* Release io memory */
333 if (itv->has_cx23415 && itv->dec_mem != NULL) {
334 IVTV_DEBUG_INFO("releasing dec_mem\n");
335 iounmap(itv->dec_mem);
339 /* Release io memory */
340 if (itv->enc_mem != NULL) {
341 IVTV_DEBUG_INFO("releasing enc_mem\n");
342 iounmap(itv->enc_mem);
347 /* Hauppauge card? get values from tveeprom */
348 void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv)
352 itv->i2c_client.addr = 0xA0 >> 1;
353 tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata));
354 tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata);
357 static void ivtv_process_eeprom(struct ivtv *itv)
360 int pci_slot = PCI_SLOT(itv->dev->devfn);
362 ivtv_read_eeprom(itv, &tv);
364 /* Many thanks to Steven Toth from Hauppauge for providing the
367 /* In a few cases the PCI subsystem IDs do not correctly
368 identify the card. A better method is to check the
369 model number from the eeprom instead. */
370 case 30012 ... 30039: /* Low profile PVR250 */
371 case 32000 ... 32999:
372 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
373 case 48400 ... 48599:
374 itv->card = ivtv_get_card(IVTV_CARD_PVR_250);
376 case 48100 ... 48399:
377 case 48600 ... 48999:
378 itv->card = ivtv_get_card(IVTV_CARD_PVR_350);
380 case 23000 ... 23999: /* PVR500 */
381 case 25000 ... 25999: /* Low profile PVR150 */
382 case 26000 ... 26999: /* Regular PVR150 */
383 itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
386 IVTV_ERR("Invalid EEPROM\n");
389 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv.model);
390 itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
395 /* Old style PVR350 (with an saa7114) uses this input for
398 itv->card = ivtv_get_card(IVTV_CARD_PVR_350_V1);
404 itv->v4l2_cap = itv->card->v4l2_capabilities;
405 itv->card_name = itv->card->name;
406 itv->card_i2c = itv->card->i2c;
408 /* If this is a PVR500 then it should be possible to detect whether it is the
409 first or second unit by looking at the subsystem device ID: is bit 4 is
410 set, then it is the second unit (according to info from Hauppauge).
412 However, while this works for most cards, I have seen a few PVR500 cards
413 where both units have the same subsystem ID.
415 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
416 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
417 it is the second unit. It is possible that it is a different slot when ivtv is
418 used in Xen, in that case I ignore this card here. The worst that can happen
419 is that the card presents itself with a non-working radio device.
421 This detection is needed since the eeprom reports incorrectly that a radio is
422 present on the second unit. */
423 if (tv.model / 1000 == 23) {
424 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = {
425 .radio = { 0x60, I2C_CLIENT_END },
426 .demod = { 0x43, I2C_CLIENT_END },
427 .tv = { 0x61, I2C_CLIENT_END },
430 itv->card_name = "WinTV PVR 500";
431 itv->card_i2c = &ivtv_i2c_radio;
432 if (pci_slot == 8 || pci_slot == 9) {
433 int is_first = (pci_slot & 1) == 0;
435 itv->card_name = is_first ? "WinTV PVR 500 (unit #1)" :
436 "WinTV PVR 500 (unit #2)";
438 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
443 IVTV_INFO("Autodetected %s\n", itv->card_name);
445 switch (tv.tuner_hauppauge_model) {
449 itv->pvr150_workaround = 1;
454 if (tv.tuner_type == TUNER_ABSENT)
455 IVTV_ERR("tveeprom cannot autodetect tuner!");
457 if (itv->options.tuner == -1)
458 itv->options.tuner = tv.tuner_type;
459 if (itv->options.radio == -1)
460 itv->options.radio = (tv.has_radio != 0);
461 /* only enable newi2c if an IR blaster is present */
462 if (itv->options.newi2c == -1 && tv.has_ir) {
463 itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0;
464 if (itv->options.newi2c) {
465 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
472 /* user specified tuner standard */
475 /* autodetect tuner standard */
476 if (tv.tuner_formats & V4L2_STD_PAL) {
477 IVTV_DEBUG_INFO("PAL tuner detected\n");
478 itv->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
479 } else if (tv.tuner_formats & V4L2_STD_NTSC) {
480 IVTV_DEBUG_INFO("NTSC tuner detected\n");
481 itv->std |= V4L2_STD_NTSC_M;
482 } else if (tv.tuner_formats & V4L2_STD_SECAM) {
483 IVTV_DEBUG_INFO("SECAM tuner detected\n");
484 itv->std |= V4L2_STD_SECAM_L;
486 IVTV_INFO("No tuner detected, default to NTSC-M\n");
487 itv->std |= V4L2_STD_NTSC_M;
491 static v4l2_std_id ivtv_parse_std(struct ivtv *itv)
496 return V4L2_STD_PAL_60;
504 return V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
508 if (pal[1] == 'c' || pal[1] == 'C')
509 return V4L2_STD_PAL_Nc;
510 return V4L2_STD_PAL_N;
514 return V4L2_STD_PAL_I;
520 return V4L2_STD_PAL_DK;
524 return V4L2_STD_PAL_M;
528 IVTV_WARN("pal= argument not recognised\n");
540 return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H;
546 return V4L2_STD_SECAM_DK;
550 if (secam[1] == 'C' || secam[1] == 'c')
551 return V4L2_STD_SECAM_LC;
552 return V4L2_STD_SECAM_L;
556 IVTV_WARN("secam= argument not recognised\n");
564 return V4L2_STD_NTSC_M;
568 return V4L2_STD_NTSC_M_JP;
572 return V4L2_STD_NTSC_M_KR;
576 IVTV_WARN("ntsc= argument not recognised\n");
584 static void ivtv_process_options(struct ivtv *itv)
586 const char *chipname;
589 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers * 1024;
590 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers * 1024;
591 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers * 1024;
592 itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
593 itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers * 1024;
594 itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers * 1024;
595 itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers;
596 itv->options.cardtype = cardtype[itv->instance];
597 itv->options.tuner = tuner[itv->instance];
598 itv->options.radio = radio[itv->instance];
599 itv->options.newi2c = newi2c;
600 if (tunertype < -1 || tunertype > 1) {
601 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
604 itv->std = ivtv_parse_std(itv);
605 if (itv->std == 0 && tunertype >= 0)
606 itv->std = tunertype ? V4L2_STD_MN : (V4L2_STD_ALL & ~V4L2_STD_MN);
607 itv->has_cx23415 = (itv->dev->device == PCI_DEVICE_ID_IVTV15);
608 chipname = itv->has_cx23415 ? "cx23415" : "cx23416";
609 if (itv->options.cardtype == -1) {
610 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname);
613 if ((itv->card = ivtv_get_card(itv->options.cardtype - 1))) {
614 IVTV_INFO("User specified %s card (detected %s based chip)\n",
615 itv->card->name, chipname);
616 } else if (itv->options.cardtype != 0) {
617 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
619 if (itv->card == NULL) {
620 if (itv->dev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE ||
621 itv->dev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT1 ||
622 itv->dev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT2) {
623 itv->card = ivtv_get_card(itv->has_cx23415 ? IVTV_CARD_PVR_350 : IVTV_CARD_PVR_150);
624 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
628 if (itv->card == NULL) {
629 for (i = 0; (itv->card = ivtv_get_card(i)); i++) {
630 if (itv->card->pci_list == NULL)
632 for (j = 0; itv->card->pci_list[j].device; j++) {
633 if (itv->dev->device !=
634 itv->card->pci_list[j].device)
636 if (itv->dev->subsystem_vendor !=
637 itv->card->pci_list[j].subsystem_vendor)
639 if (itv->dev->subsystem_device !=
640 itv->card->pci_list[j].subsystem_device)
642 IVTV_INFO("Autodetected %s card (%s based)\n",
643 itv->card->name, chipname);
650 if (itv->card == NULL) {
651 itv->card = ivtv_get_card(IVTV_CARD_PVR_150);
652 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
653 itv->dev->vendor, itv->dev->device);
654 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
655 itv->dev->subsystem_vendor, itv->dev->subsystem_device);
656 IVTV_ERR(" %s based\n", chipname);
657 IVTV_ERR("Defaulting to %s card\n", itv->card->name);
658 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
659 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
660 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
662 itv->v4l2_cap = itv->card->v4l2_capabilities;
663 itv->card_name = itv->card->name;
664 itv->card_i2c = itv->card->i2c;
667 /* Precondition: the ivtv structure has been memset to 0. Only
668 the dev and num fields have been filled in.
669 No assumptions on the card type may be made here (see ivtv_init_struct2
672 static int __devinit ivtv_init_struct1(struct ivtv *itv)
674 itv->base_addr = pci_resource_start(itv->dev, 0);
675 itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */
676 itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */
678 mutex_init(&itv->serialize_lock);
679 mutex_init(&itv->i2c_bus_lock);
680 mutex_init(&itv->udma.lock);
682 spin_lock_init(&itv->lock);
683 spin_lock_init(&itv->dma_reg_lock);
685 itv->irq_work_queues = create_singlethread_workqueue(itv->device.name);
686 if (itv->irq_work_queues == NULL) {
687 IVTV_ERR("Could not create ivtv workqueue\n");
691 INIT_WORK(&itv->irq_work_queue, ivtv_irq_work_handler);
693 /* start counting open_id at 1 */
696 /* Initial settings */
697 cx2341x_fill_defaults(&itv->params);
698 itv->params.port = CX2341X_PORT_MEMORY;
699 itv->params.capabilities = CX2341X_CAP_HAS_SLICED_VBI;
700 init_waitqueue_head(&itv->eos_waitq);
701 init_waitqueue_head(&itv->event_waitq);
702 init_waitqueue_head(&itv->vsync_waitq);
703 init_waitqueue_head(&itv->dma_waitq);
704 init_timer(&itv->dma_timer);
705 itv->dma_timer.function = ivtv_unfinished_dma;
706 itv->dma_timer.data = (unsigned long)itv;
708 itv->cur_dma_stream = -1;
709 itv->cur_pio_stream = -1;
710 itv->audio_stereo_mode = AUDIO_STEREO;
711 itv->audio_bilingual_mode = AUDIO_MONO_LEFT;
717 itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
718 itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced;
720 /* Init the sg table for osd/yuv output */
721 sg_init_table(itv->udma.SGlist, IVTV_DMA_SG_OSD_ENT);
724 itv->osd_global_alpha_state = 1;
725 itv->osd_global_alpha = 255;
728 atomic_set(&itv->yuv_info.next_dma_frame, -1);
729 itv->yuv_info.lace_mode = ivtv_yuv_mode;
730 itv->yuv_info.lace_threshold = ivtv_yuv_threshold;
731 itv->yuv_info.max_frames_buffered = 3;
732 itv->yuv_info.track_osd = 1;
736 /* Second initialization part. Here the card type has been
738 static void __devinit ivtv_init_struct2(struct ivtv *itv)
742 for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS; i++)
743 if (itv->card->video_inputs[i].video_type == 0)
746 for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS; i++)
747 if (itv->card->audio_inputs[i].audio_type == 0)
749 itv->nof_audio_inputs = i;
751 if (itv->card->hw_all & IVTV_HW_CX25840) {
752 itv->vbi.sliced_size = 288; /* multiple of 16, real size = 284 */
754 itv->vbi.sliced_size = 64; /* multiple of 16, real size = 52 */
757 /* Find tuner input */
758 for (i = 0; i < itv->nof_inputs; i++) {
759 if (itv->card->video_inputs[i].video_type ==
760 IVTV_CARD_INPUT_VID_TUNER)
763 if (i == itv->nof_inputs)
765 itv->active_input = i;
766 itv->audio_input = itv->card->video_inputs[i].audio_index;
769 static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *dev,
770 const struct pci_device_id *pci_id)
774 unsigned char pci_latency;
776 IVTV_DEBUG_INFO("Enabling pci device\n");
778 if (pci_enable_device(dev)) {
779 IVTV_ERR("Can't enable device!\n");
782 if (pci_set_dma_mask(dev, 0xffffffff)) {
783 IVTV_ERR("No suitable DMA available.\n");
786 if (!request_mem_region(itv->base_addr, IVTV_ENCODER_SIZE, "ivtv encoder")) {
787 IVTV_ERR("Cannot request encoder memory region.\n");
791 if (!request_mem_region(itv->base_addr + IVTV_REG_OFFSET,
792 IVTV_REG_SIZE, "ivtv registers")) {
793 IVTV_ERR("Cannot request register memory region.\n");
794 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
798 if (itv->has_cx23415 &&
799 !request_mem_region(itv->base_addr + IVTV_DECODER_OFFSET,
800 IVTV_DECODER_SIZE, "ivtv decoder")) {
801 IVTV_ERR("Cannot request decoder memory region.\n");
802 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
803 release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
807 /* Check for bus mastering */
808 pci_read_config_word(dev, PCI_COMMAND, &cmd);
809 if (!(cmd & PCI_COMMAND_MASTER)) {
810 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
812 pci_read_config_word(dev, PCI_COMMAND, &cmd);
813 if (!(cmd & PCI_COMMAND_MASTER)) {
814 IVTV_ERR("Bus Mastering is not enabled\n");
818 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
820 pci_read_config_byte(dev, PCI_CLASS_REVISION, &card_rev);
821 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency);
823 if (pci_latency < 64 && ivtv_pci_latency) {
824 IVTV_INFO("Unreasonably low latency timer, "
825 "setting to 64 (was %d)\n", pci_latency);
826 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
827 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &pci_latency);
829 /* This config space value relates to DMA latencies. The
830 default value 0x8080 is too low however and will lead
831 to DMA errors. 0xffff is the max value which solves
833 pci_write_config_dword(dev, 0x40, 0xffff);
835 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
836 "irq: %d, latency: %d, memory: 0x%lx\n",
837 itv->dev->device, card_rev, dev->bus->number,
838 PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
839 itv->dev->irq, pci_latency, (unsigned long)itv->base_addr);
844 static void ivtv_load_and_init_modules(struct ivtv *itv)
846 u32 hw = itv->card->hw_all;
849 /* check which i2c devices are actually found */
850 for (i = 0; i < 32; i++) {
855 if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) {
856 /* GPIO and TVEEPROM do not use i2c probing */
857 itv->hw_flags |= device;
860 if (ivtv_i2c_register(itv, i) == 0)
861 itv->hw_flags |= device;
864 if (itv->card->hw_all & IVTV_HW_CX25840)
865 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_CX25840);
866 else if (itv->card->hw_all & IVTV_HW_SAA717X)
867 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA717X);
868 else if (itv->card->hw_all & IVTV_HW_SAA7114)
869 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7114);
871 itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7115);
872 itv->sd_audio = ivtv_find_hw(itv, itv->card->hw_audio_ctrl);
873 itv->sd_muxer = ivtv_find_hw(itv, itv->card->hw_muxer);
877 if (itv->card->type == IVTV_CARD_CX23416GYC) {
878 /* Several variations of this card exist, detect which card
879 type should be used. */
880 if ((hw & (IVTV_HW_UPD64031A | IVTV_HW_UPD6408X)) == 0)
881 itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS);
882 else if ((hw & IVTV_HW_UPD64031A) == 0)
883 itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR);
885 else if (itv->card->type == IVTV_CARD_GV_MVPRX ||
886 itv->card->type == IVTV_CARD_GV_MVPRX2E) {
887 struct v4l2_crystal_freq crystal_freq;
889 /* The crystal frequency of GVMVPRX is 24.576MHz */
890 crystal_freq.freq = SAA7115_FREQ_24_576_MHZ;
891 crystal_freq.flags = SAA7115_FREQ_FL_UCGC;
892 v4l2_subdev_call(itv->sd_video, video, s_crystal_freq, &crystal_freq);
895 if (hw & IVTV_HW_CX25840) {
896 itv->vbi.raw_decoder_line_size = 1444;
897 itv->vbi.raw_decoder_sav_odd_field = 0x20;
898 itv->vbi.raw_decoder_sav_even_field = 0x60;
899 itv->vbi.sliced_decoder_line_size = 272;
900 itv->vbi.sliced_decoder_sav_odd_field = 0xB0;
901 itv->vbi.sliced_decoder_sav_even_field = 0xF0;
904 if (hw & IVTV_HW_SAA711X) {
905 struct v4l2_dbg_chip_ident v;
907 /* determine the exact saa711x model */
908 itv->hw_flags &= ~IVTV_HW_SAA711X;
910 v.match.type = V4L2_CHIP_MATCH_I2C_DRIVER;
911 strlcpy(v.match.name, "saa7115", sizeof(v.match.name));
912 ivtv_call_hw(itv, IVTV_HW_SAA711X, core, g_chip_ident, &v);
913 if (v.ident == V4L2_IDENT_SAA7114) {
914 itv->hw_flags |= IVTV_HW_SAA7114;
915 /* VBI is not yet supported by the saa7114 driver. */
916 itv->v4l2_cap &= ~(V4L2_CAP_SLICED_VBI_CAPTURE|V4L2_CAP_VBI_CAPTURE);
918 itv->hw_flags |= IVTV_HW_SAA7115;
920 itv->vbi.raw_decoder_line_size = 1443;
921 itv->vbi.raw_decoder_sav_odd_field = 0x25;
922 itv->vbi.raw_decoder_sav_even_field = 0x62;
923 itv->vbi.sliced_decoder_line_size = 51;
924 itv->vbi.sliced_decoder_sav_odd_field = 0xAB;
925 itv->vbi.sliced_decoder_sav_even_field = 0xEC;
928 if (hw & IVTV_HW_SAA717X) {
929 itv->vbi.raw_decoder_line_size = 1443;
930 itv->vbi.raw_decoder_sav_odd_field = 0x25;
931 itv->vbi.raw_decoder_sav_even_field = 0x62;
932 itv->vbi.sliced_decoder_line_size = 51;
933 itv->vbi.sliced_decoder_sav_odd_field = 0xAB;
934 itv->vbi.sliced_decoder_sav_even_field = 0xEC;
938 static int __devinit ivtv_probe(struct pci_dev *dev,
939 const struct pci_device_id *pci_id)
945 itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC);
949 itv->instance = atomic_inc_return(&ivtv_instance) - 1;
951 retval = v4l2_device_register(&dev->dev, &itv->device);
956 /* "ivtv + PCI ID" is a bit of a mouthful, so use
957 "ivtv + instance" instead. */
958 snprintf(itv->device.name, sizeof(itv->device.name),
959 "ivtv%d", itv->instance);
960 IVTV_INFO("Initializing card %d\n", itv->instance);
962 ivtv_process_options(itv);
963 if (itv->options.cardtype == -1) {
967 if (ivtv_init_struct1(itv)) {
972 IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
974 /* PCI Device Setup */
975 if ((retval = ivtv_setup_pci(itv, dev, pci_id)) != 0) {
978 else if (retval == -ENXIO)
983 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
984 itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
985 itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
988 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
989 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
994 if (itv->has_cx23415) {
995 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
996 itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
997 itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
1000 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
1001 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1007 itv->dec_mem = itv->enc_mem;
1010 /* map registers memory */
1011 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1012 itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1014 ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1015 if (!itv->reg_mem) {
1016 IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
1017 IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
1022 retval = ivtv_gpio_init(itv);
1027 IVTV_DEBUG_INFO("activating i2c...\n");
1028 if (init_ivtv_i2c(itv)) {
1029 IVTV_ERR("Could not initialize i2c\n");
1033 if (itv->card->hw_all & IVTV_HW_TVEEPROM) {
1034 /* Based on the model number the cardtype may be changed.
1035 The PCI IDs are not always reliable. */
1036 ivtv_process_eeprom(itv);
1038 if (itv->card->comment)
1039 IVTV_INFO("%s", itv->card->comment);
1040 if (itv->card->v4l2_capabilities == 0) {
1041 /* card was detected but is not supported */
1046 if (itv->std == 0) {
1047 itv->std = V4L2_STD_NTSC_M;
1050 if (itv->options.tuner == -1) {
1053 for (i = 0; i < IVTV_CARD_MAX_TUNERS; i++) {
1054 if ((itv->std & itv->card->tuners[i].std) == 0)
1056 itv->options.tuner = itv->card->tuners[i].tuner;
1060 /* if no tuner was found, then pick the first tuner in the card list */
1061 if (itv->options.tuner == -1 && itv->card->tuners[0].std) {
1062 itv->std = itv->card->tuners[0].std;
1063 if (itv->std & V4L2_STD_PAL)
1064 itv->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
1065 else if (itv->std & V4L2_STD_NTSC)
1066 itv->std = V4L2_STD_NTSC_M;
1067 else if (itv->std & V4L2_STD_SECAM)
1068 itv->std = V4L2_STD_SECAM_L;
1069 itv->options.tuner = itv->card->tuners[0].tuner;
1071 if (itv->options.radio == -1)
1072 itv->options.radio = (itv->card->radio_input.audio_type != 0);
1074 /* The card is now fully identified, continue with card-specific
1076 ivtv_init_struct2(itv);
1078 ivtv_load_and_init_modules(itv);
1080 if (itv->std & V4L2_STD_525_60) {
1082 itv->is_out_60hz = 1;
1085 itv->is_out_50hz = 1;
1088 itv->yuv_info.osd_full_w = 720;
1089 itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480;
1090 itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w;
1091 itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h;
1093 itv->params.video_gop_size = itv->is_60hz ? 15 : 12;
1095 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000;
1096 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200;
1097 itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000;
1098 itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000;
1099 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000;
1101 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1102 It is possible to switch between PAL and NTSC, so we need to
1103 take the largest size here. */
1104 /* 1456 is multiple of 16, real size = 1444 */
1105 itv->vbi.raw_size = 1456;
1106 /* We use a buffer size of 1/2 of the total size needed for a
1107 frame. This is actually very useful, since we now receive
1108 a field at a time and that makes 'compressing' the raw data
1109 down to size by stripping off the SAV codes a lot easier.
1110 Note: having two different buffer sizes prevents standard
1111 switching on the fly. We need to find a better solution... */
1112 vbi_buf_size = itv->vbi.raw_size * (itv->is_60hz ? 24 : 36) / 2;
1113 itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_VBI] = vbi_buf_size;
1114 itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_VBI] = sizeof(struct v4l2_sliced_vbi_data) * 36;
1116 if (itv->options.radio > 0)
1117 itv->v4l2_cap |= V4L2_CAP_RADIO;
1119 if (itv->options.tuner > -1) {
1120 struct tuner_setup setup;
1122 setup.addr = ADDR_UNSET;
1123 setup.type = itv->options.tuner;
1124 setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
1125 setup.tuner_callback = (setup.type == TUNER_XC2028) ?
1126 ivtv_reset_tuner_gpio : NULL;
1127 ivtv_call_all(itv, tuner, s_type_addr, &setup);
1128 if (setup.type == TUNER_XC2028) {
1129 static struct xc2028_ctrl ctrl = {
1130 .fname = XC2028_DEFAULT_FIRMWARE,
1133 struct v4l2_priv_tun_config cfg = {
1134 .tuner = itv->options.tuner,
1137 ivtv_call_all(itv, tuner, s_config, &cfg);
1141 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1143 itv->tuner_std = itv->std;
1145 if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
1146 ivtv_call_all(itv, video, s_std_output, itv->std);
1147 /* Turn off the output signal. The mpeg decoder is not yet
1148 active so without this you would get a green image until the
1149 mpeg decoder becomes active. */
1150 ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
1153 /* clear interrupt mask, effectively disabling interrupts */
1154 ivtv_set_irq_mask(itv, 0xffffffff);
1157 retval = request_irq(itv->dev->irq, ivtv_irq_handler,
1158 IRQF_SHARED | IRQF_DISABLED, itv->device.name, (void *)itv);
1160 IVTV_ERR("Failed to register irq %d\n", retval);
1164 retval = ivtv_streams_setup(itv);
1166 IVTV_ERR("Error %d setting up streams\n", retval);
1169 retval = ivtv_streams_register(itv);
1171 IVTV_ERR("Error %d registering devices\n", retval);
1174 IVTV_INFO("Initialized card: %s\n", itv->card_name);
1178 ivtv_streams_cleanup(itv, 1);
1180 free_irq(itv->dev->irq, (void *)itv);
1186 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
1187 release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1188 if (itv->has_cx23415)
1189 release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
1191 destroy_workqueue(itv->irq_work_queues);
1195 IVTV_ERR("Error %d on initialization\n", retval);
1197 v4l2_device_unregister(&itv->device);
1202 int ivtv_init_on_first_open(struct ivtv *itv)
1204 struct v4l2_frequency vf;
1205 /* Needed to call ioctls later */
1206 struct ivtv_open_id fh;
1207 int fw_retry_count = 3;
1212 if (test_bit(IVTV_F_I_FAILED, &itv->i_flags))
1215 if (test_and_set_bit(IVTV_F_I_INITED, &itv->i_flags))
1218 while (--fw_retry_count > 0) {
1220 if (ivtv_firmware_init(itv) == 0)
1222 if (fw_retry_count > 1)
1223 IVTV_WARN("Retry loading firmware\n");
1226 if (fw_retry_count == 0) {
1227 set_bit(IVTV_F_I_FAILED, &itv->i_flags);
1231 /* Try and get firmware versions */
1232 IVTV_DEBUG_INFO("Getting firmware version..\n");
1233 ivtv_firmware_versions(itv);
1235 if (itv->card->hw_all & IVTV_HW_CX25840) {
1236 struct v4l2_control ctrl;
1238 v4l2_subdev_call(itv->sd_video, core, init, 0);
1239 /* CX25840_CID_ENABLE_PVR150_WORKAROUND */
1240 ctrl.id = V4L2_CID_PRIVATE_BASE;
1241 ctrl.value = itv->pvr150_workaround;
1242 v4l2_subdev_call(itv->sd_video, core, s_ctrl, &ctrl);
1246 vf.type = V4L2_TUNER_ANALOG_TV;
1247 vf.frequency = 6400; /* the tuner 'baseline' frequency */
1249 /* Set initial frequency. For PAL/SECAM broadcasts no
1250 'default' channel exists AFAIK. */
1251 if (itv->std == V4L2_STD_NTSC_M_JP) {
1252 vf.frequency = 1460; /* ch. 1 91250*16/1000 */
1254 else if (itv->std & V4L2_STD_NTSC_M) {
1255 vf.frequency = 1076; /* ch. 4 67250*16/1000 */
1258 video_input = itv->active_input;
1259 itv->active_input++; /* Force update of input */
1260 ivtv_s_input(NULL, &fh, video_input);
1262 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1264 itv->std++; /* Force full standard initialization */
1265 itv->std_out = itv->std;
1266 ivtv_s_frequency(NULL, &fh, &vf);
1268 if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) {
1269 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1270 the mpeg decoder so now the saa7127 receives a proper
1272 ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1);
1273 ivtv_init_mpeg_decoder(itv);
1275 ivtv_s_std(NULL, &fh, &itv->tuner_std);
1277 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1278 if (!itv->has_cx23415)
1279 write_reg_sync(0x03, IVTV_REG_DMACONTROL);
1281 /* Default interrupts enabled. For the PVR350 this includes the
1282 decoder VSYNC interrupt, which is always on. It is not only used
1283 during decoding but also by the OSD.
1284 Some old PVR250 cards had a cx23415, so testing for that is too
1285 general. Instead test if the card has video output capability. */
1286 if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
1287 ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
1288 ivtv_set_osd_alpha(itv);
1291 ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
1295 static void ivtv_remove(struct pci_dev *pci_dev)
1297 struct v4l2_device *dev = dev_get_drvdata(&pci_dev->dev);
1298 struct ivtv *itv = to_ivtv(dev);
1301 IVTV_DEBUG_INFO("Removing card\n");
1303 if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) {
1304 /* Stop all captures */
1305 IVTV_DEBUG_INFO("Stopping all streams\n");
1306 if (atomic_read(&itv->capturing) > 0)
1307 ivtv_stop_all_captures(itv);
1309 /* Stop all decoding */
1310 IVTV_DEBUG_INFO("Stopping decoding\n");
1312 /* Turn off the TV-out */
1313 if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
1314 ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0);
1315 if (atomic_read(&itv->decoding) > 0) {
1318 if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags))
1319 type = IVTV_DEC_STREAM_TYPE_YUV;
1321 type = IVTV_DEC_STREAM_TYPE_MPG;
1322 ivtv_stop_v4l2_decode_stream(&itv->streams[type],
1323 VIDEO_CMD_STOP_TO_BLACK | VIDEO_CMD_STOP_IMMEDIATELY, 0);
1325 ivtv_halt_firmware(itv);
1329 ivtv_set_irq_mask(itv, 0xffffffff);
1330 del_timer_sync(&itv->dma_timer);
1332 /* Stop all Work Queues */
1333 flush_workqueue(itv->irq_work_queues);
1334 destroy_workqueue(itv->irq_work_queues);
1336 ivtv_streams_cleanup(itv, 1);
1337 ivtv_udma_free(itv);
1339 v4l2_device_unregister(&itv->device);
1343 free_irq(itv->dev->irq, (void *)itv);
1346 release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE);
1347 release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
1348 if (itv->has_cx23415)
1349 release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
1351 pci_disable_device(itv->dev);
1352 for (i = 0; i < IVTV_VBI_FRAMES; i++)
1353 kfree(itv->vbi.sliced_mpeg_data[i]);
1355 printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name);
1359 /* define a pci_driver for card detection */
1360 static struct pci_driver ivtv_pci_driver = {
1362 .id_table = ivtv_pci_tbl,
1363 .probe = ivtv_probe,
1364 .remove = ivtv_remove,
1367 static int module_start(void)
1369 printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION);
1371 /* Validate parameters */
1372 if (ivtv_first_minor < 0 || ivtv_first_minor >= IVTV_MAX_CARDS) {
1373 printk(KERN_ERR "ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
1374 IVTV_MAX_CARDS - 1);
1378 if (ivtv_debug < 0 || ivtv_debug > 2047) {
1380 printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 2047\n");
1383 if (pci_register_driver(&ivtv_pci_driver)) {
1384 printk(KERN_ERR "ivtv: Error detecting PCI card\n");
1387 printk(KERN_INFO "ivtv: End initialization\n");
1391 static void module_cleanup(void)
1393 pci_unregister_driver(&ivtv_pci_driver);
1396 /* Note: These symbols are exported because they are used by the ivtvfb
1397 framebuffer module and an infrared module for the IR-blaster. */
1398 EXPORT_SYMBOL(ivtv_set_irq_mask);
1399 EXPORT_SYMBOL(ivtv_api);
1400 EXPORT_SYMBOL(ivtv_vapi);
1401 EXPORT_SYMBOL(ivtv_vapi_result);
1402 EXPORT_SYMBOL(ivtv_clear_irq_mask);
1403 EXPORT_SYMBOL(ivtv_debug);
1404 EXPORT_SYMBOL(ivtv_reset_ir_gpio);
1405 EXPORT_SYMBOL(ivtv_udma_setup);
1406 EXPORT_SYMBOL(ivtv_udma_unmap);
1407 EXPORT_SYMBOL(ivtv_udma_alloc);
1408 EXPORT_SYMBOL(ivtv_udma_prepare);
1409 EXPORT_SYMBOL(ivtv_init_on_first_open);
1411 module_init(module_start);
1412 module_exit(module_cleanup);