1 Tridentfb is a framebuffer driver for some Trident chip based cards.
3 The following list of chips is thought to be supported although not all are
6 those from the TGUI series 9440/96XX and with Cyber in their names
7 those from the Image series and with Cyber in their names
8 those with Blade in their names (Blade3D,CyberBlade...)
9 the newer CyberBladeXP family
11 All families are accelerated. Only PCI/AGP based cards are supported,
12 none of the older Tridents.
13 The driver supports 8, 16 and 32 bits per pixel depths.
14 The TGUI family requires a line length to be power of 2 if acceleration
15 is enabled. This means that range of possible resolutions and bpp is
16 limited comparing to the range if acceleration is disabled (see list
20 1. The driver randomly locks up on 3DImage975 chip with acceleration
21 enabled. The same happens in X11 (Xorg).
22 2. The ramdac speeds require some more fine tuning. It is possible to
23 switch resolution which the chip does not support at some depths for
29 When booting you can pass the video parameter.
32 The parameters for tridentfb are concatenated with a ':' as in this example.
34 video=tridentfb:800x600-16@75,noaccel
36 The second level parameters that tridentfb understands are:
38 noaccel - turns off acceleration (when it doesn't work for your card)
40 fp - use flat panel related stuff
41 crt - assume monitor is present instead of fp
43 center - for flat panels and resolutions smaller than native size center the
47 memsize - integer value in KB, use if your card's memory size is misdetected.
48 look at the driver output to see what it says when initializing.
50 memdiff - integer value in KB, should be nonzero if your card reports
51 more memory than it actually has. For instance mine is 192K less than
52 detection says in all three BIOS selectable situations 2M, 4M, 8M.
53 Only use if your video memory is taken from main memory hence of
54 configurable size. Otherwise use memsize.
55 If in some modes which barely fit the memory you see garbage
56 at the bottom this might help by not letting change to that mode
59 nativex - the width in pixels of the flat panel.If you know it (usually 1024
60 800 or 1280) and it is not what the driver seems to detect use it.
62 bpp - bits per pixel (8,16 or 32)
63 mode - a mode name like 800x600-8@75 as described in
64 Documentation/fb/modedb.txt
66 Using insane values for the above parameters will probably result in driver
67 misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or
70 Contact: jani@astechnix.ro