1 # For a description of the syntax of this configuration file,
2 # see Documentation/kbuild/kconfig-language.txt.
5 mainmenu "Linux/PowerPC Kernel Configuration"
14 config GENERIC_HARDIRQS
18 config RWSEM_GENERIC_SPINLOCK
21 config RWSEM_XCHGADD_ALGORITHM
25 config GENERIC_CALIBRATE_DELAY
41 # All PPCs use generic nvram driver through ppc_md
46 config SCHED_NO_NO_OMIT_FRAME_POINTER
55 prompt "Processor Type"
59 bool "6xx/7xx/74xx/52xx/82xx/83xx"
62 There are four types of PowerPC chips supported. The more common
63 types (601, 603, 604, 740, 750, 7400), the Motorola embedded
64 versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
65 versions (403 and 405) and the high end 64 bit Power processors
66 (POWER 3, POWER4, and IBM 970 also known as G5)
67 Unless you are building a kernel for one of the embedded processor
68 systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
69 Note that the kernel runs in 32-bit mode even on 64-bit chips.
70 Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
71 specific support for that chipset is asked later on.
85 bool "POWER4 and 970 (G5)"
103 depends on E200 || E500
108 depends on E200 || E500
113 depends on 44x || E500
115 default y if E500 && PHYS_64BIT
118 bool 'Large physical address support' if E500
119 depends on 44x || E500
122 This option enables kernel support for larger than 32-bit physical
123 addresses. This features is not be available on all e500 cores.
125 If in doubt, say N here.
128 bool "AltiVec Support"
129 depends on 6xx || POWER4
130 depends on !8260 && !83xx
132 This option enables kernel support for the Altivec extensions to the
133 PowerPC processor. The kernel currently supports saving and restoring
134 altivec registers, and turning on the 'altivec enable' bit so user
135 processes can execute altivec instructions.
137 This option is only usefully if you have a processor that supports
138 altivec (G4, otherwise known as 74xx series), but does not have
139 any affect on a non-altivec cpu (it does, however add code to the
142 If in doubt, say Y here.
146 depends on E200 || E500
148 This option enables kernel support for the Signal Processing
149 Extensions (SPE) to the PowerPC processor. The kernel currently
150 supports saving and restoring SPE registers, and turning on the
151 'spe enable' bit so user processes can execute SPE instructions.
153 This option is only useful if you have a processor that supports
154 SPE (e500, otherwise known as 85xx series), but does not have any
155 effect on a non-spe cpu (it does, however add code to the kernel).
157 If in doubt, say Y here.
160 bool "Thermal Management Support"
161 depends on 6xx && !8260 && !83xx
163 G3 and G4 processors have an on-chip temperature sensor called the
164 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
165 temperature within 2-4 degrees Celsius. This option shows the current
166 on-die temperature in /proc/cpuinfo if the cpu supports it.
168 Unfortunately, on some chip revisions, this sensor is very inaccurate
169 and in some cases, does not work at all, so don't assume the cpu
170 temp is actually what /proc/cpuinfo says it is.
173 bool "Interrupt driven TAU driver (DANGEROUS)"
176 The TAU supports an interrupt driven mode which causes an interrupt
177 whenever the temperature goes out of range. This is the fastest way
178 to get notified the temp has exceeded a range. With this option off,
179 a timer is used to re-check the temperature periodically.
181 However, on some cpus it appears that the TAU interrupt hardware
182 is buggy and can cause a situation which would lead unexplained hard
185 Unless you are extending the TAU driver, or enjoy kernel/hardware
186 debugging, leave this option off.
189 bool "Average high and low temp"
192 The TAU hardware can compare the temperature to an upper and lower
193 bound. The default behavior is to show both the upper and lower
194 bound in /proc/cpuinfo. If the range is large, the temperature is
195 either changing a lot, or the TAU hardware is broken (likely on some
196 G4's). If the range is small (around 4 degrees), the temperature is
197 relatively stable. If you say Y here, a single temperature value,
198 halfway between the upper and lower bounds, will be reported in
201 If in doubt, say N here.
203 config MATH_EMULATION
204 bool "Math emulation"
205 depends on 4xx || 8xx || E200 || E500
207 Some PowerPC chips designed for embedded applications do not have
208 a floating-point unit and therefore do not implement the
209 floating-point instructions in the PowerPC instruction set. If you
210 say Y here, the kernel will include code to emulate a floating-point
211 unit, which will allow programs that use floating-point
214 If you have an Apple machine or an IBM RS/6000 or pSeries machine,
215 or any machine with a 6xx, 7xx or 7xxx series processor, say N
216 here. Saying Y here will not hurt performance (on any machine) but
217 will increase the size of the kernel.
220 bool "kexec system call (EXPERIMENTAL)"
221 depends on EXPERIMENTAL
223 kexec is a system call that implements the ability to shutdown your
224 current kernel, and to start another kernel. It is like a reboot
225 but it is indepedent of the system firmware. And like a reboot
226 you can start any kernel with it, not just Linux.
228 The name comes from the similiarity to the exec system call.
230 It is an ongoing process to be certain the hardware in a machine
231 is properly shutdown, so do not be surprised if this code does not
232 initially work for you. It may help to enable device hotplugging
233 support. As of this writing the exact hardware interface is
234 strongly in flux, so no good recommendation can be made.
236 In the GameCube implementation, kexec allows you to load and
237 run DOL files, including kernel and homebrew DOLs.
239 source "drivers/cpufreq/Kconfig"
242 bool "Support for Apple PowerBooks"
243 depends on CPU_FREQ && ADB_PMU
244 select CPU_FREQ_TABLE
246 This adds support for frequency switching on Apple PowerBooks,
247 this currently includes some models of iBook & Titanium
250 config PPC601_SYNC_FIX
251 bool "Workarounds for PPC601 bugs"
252 depends on 6xx && (PPC_PREP || PPC_PMAC)
254 Some versions of the PPC601 (the first PowerPC chip) have bugs which
255 mean that extra synchronization instructions are required near
256 certain instructions, typically those that make major changes to the
257 CPU state. These extra instructions reduce performance slightly.
258 If you say N here, these extra instructions will not be included,
259 resulting in a kernel which will run faster but may not run at all
260 on some systems with the PPC601 chip.
262 If in doubt, say Y here.
264 source arch/ppc/platforms/4xx/Kconfig
265 source arch/ppc/platforms/85xx/Kconfig
269 depends on POWER3 || POWER4
274 depends on 6xx || POWER3 || POWER4
277 config NOT_COHERENT_CACHE
279 depends on 4xx || 8xx || E200
284 menu "Platform options"
290 prompt "8xx Machine Type"
297 Single-board computers based around the PowerPC MPC8xx chips and
298 intended for embedded applications. The following types are
302 Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
305 Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
309 Bright Star Engineering ip-Engine.
315 MPC8xx based family of mini modules, half credit card size,
316 up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
317 2 x CAN bus interface, ...
318 Manufacturer: TQ Components, www.tq-group.de
319 Date of Release: October (?) 1999
320 End of Life: not yet :-)
322 - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
323 - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
324 - images: <http://www.denx.de/embedded-ppc-en.html>
327 FingerPrint Sensor System (based on TQM850L)
328 Manufacturer: IKENDI AG, <http://www.ikendi.com/>
329 Date of Release: November 1999
330 End of life: end 2000 ?
334 MPC860 based board used in the "Integrated Voice Mail System",
335 Small Version (8 voice channels)
336 Manufacturer: Speech Design, <http://www.speech-design.de/>
337 Date of Release: December 2000 (?)
339 URL: <http://www.speech-design.de/>
342 MPC860 based board used in the "Integrated Voice Mail System",
343 Large Version (24 voice channels)
344 Manufacturer: Speech Design, <http://www.speech-design.de/>
345 Date of Release: March 2001 (?)
347 URL: <http://www.speech-design.de/>
350 Hermes-Pro ISDN/LAN router with integrated 8 x hub
351 Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
352 <http://www.multidata.de/>
353 Date of Release: 2000 (?)
355 URL: <http://www.multidata.de/english/products/hpro.htm>
358 VMEBus IP (Industry Pack) carrier board with MPC860
359 Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
362 URL: <http://www.microsys.de/html/ip860.html>
365 PCU = Peripheral Controller Unit, Extended
366 Manufacturer: Siemens AG, ICN (Information and Communication Networks)
367 <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
368 Date of Release: April 2001
369 End of life: August 2001
375 The RPX-Classic is a single-board computer based on the Motorola
376 MPC860. It features 16MB of DRAM and a variable amount of flash,
377 I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
378 LEDs. Variants with Ethernet ports exist. Say Y here to support it
384 Say Y here to support the Bright Star Engineering ipEngine SBC.
385 This is a credit-card-sized device featuring a MPC823 processor,
386 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
387 controller, and two RS232 ports.
396 MPC86x Application Development System by Freescale Semiconductor.
397 The MPC86xADS is meant to serve as a platform for s/w and h/w
398 development around the MPC86X processor families.
404 Freescale Semiconductor MPC885 Application Development System (ADS).
406 The MPC885ADS is meant to serve as a platform for s/w and h/w
407 development around the MPC885 processor family.
412 Say Y here to support the TQM823L, one of an MPC8xx-based family of
413 mini SBCs (half credit-card size) from TQ Components first released
414 in late 1999. Technical references are at
415 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
416 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
417 <http://www.denx.de/embedded-ppc-en.html>.
422 Say Y here to support the TQM850L, one of an MPC8xx-based family of
423 mini SBCs (half credit-card size) from TQ Components first released
424 in late 1999. Technical references are at
425 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
426 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
427 <http://www.denx.de/embedded-ppc-en.html>.
432 Say Y here to support the TQM855L, one of an MPC8xx-based family of
433 mini SBCs (half credit-card size) from TQ Components first released
434 in late 1999. Technical references are at
435 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
436 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
437 <http://www.denx.de/embedded-ppc-en.html>.
442 Say Y here to support the TQM860L, one of an MPC8xx-based family of
443 mini SBCs (half credit-card size) from TQ Components first released
444 in late 1999. Technical references are at
445 <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
446 <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
447 <http://www.denx.de/embedded-ppc-en.html>.
455 Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
456 from Speech Design, released March 2001. The manufacturer's website
457 is at <http://www.speech-design.de/>.
462 Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
463 from Speech Design, released March 2001. The manufacturer's website
464 is at <http://www.speech-design.de/>.
487 MBX is a line of Motorola single-board computer based around the
488 MPC821 and MPC860 processors, and intended for embedded-controller
489 applications. Say Y here to support these boards directly.
494 The Wincept 100/110 is a Motorola single-board computer based on the
495 MPC821 PowerPC, introduced in 1998 and designed to be used in
496 thin-client machines. Say Y to support it directly.
501 prompt "Machine Type"
502 depends on 6xx || POWER3 || POWER4
503 default PPC_MULTIPLATFORM
505 Linux currently supports several different kinds of PowerPC-based
506 machines: Apple Power Macintoshes and clones (such as the Motorola
507 Starmax series), PReP (PowerPC Reference Platform) machines (such
508 as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
509 and some IBM RS/6000 systems), CHRP (Common Hardware Reference
510 Platform) machines (including all of the recent IBM RS/6000 and
511 pSeries machines), and several embedded PowerPC systems containing
512 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
513 default option is to build a kernel which works on the first three.
515 Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
516 pSeries machine, a Power Macintosh (including iMacs, iBooks and
517 Powerbooks), or a PReP machine.
519 Select Gemini if configuring for a Synergy Microsystems' Gemini
520 series Single Board Computer. More information is available at:
521 <http://www.synergymicro.com/PressRel/97_10_15.html>.
523 Select APUS if configuring for a PowerUP Amiga. More information is
524 available at: <http://linux-apus.sourceforge.net/>.
526 config PPC_MULTIPLATFORM
527 bool "CHRP/PowerMac/PReP"
533 Select APUS if configuring for a PowerUP Amiga.
534 More information is available at:
535 <http://linux-apus.sourceforge.net/>.
538 bool "Artesyn-Katana"
540 Select KATANA if configuring an Artesyn KATANA 750i or 3750
549 Select CPCI690 if configuring a Force CPCI690 cPCI board.
552 bool "Force-PowerPMC250"
555 bool "IBM 750FX Eval board or 750GX Eval board"
557 Select CHESTNUT if configuring an IBM 750FX Eval Board or a
558 IBM 750GX Eval board.
566 Select HDPU if configuring a Sky Computers Compute Blade.
570 tristate "HDPU-Features"
572 Select to enable HDPU enhanced features.
575 bool "Marvell-EV64260BP"
577 Select EV64260 if configuring a Marvell (formerly Galileo)
578 EV64260BP Evaluation platform.
581 bool "Motorola-LoPEC"
584 bool "Motorola-MVME5100"
587 bool "Motorola-PowerPlus"
590 bool "Motorola-PrPMC750"
593 bool "Motorola-PrPMC800"
596 bool "Motorola-Sandpoint"
598 Select SANDPOINT if configuring for a Motorola Sandpoint X3
601 config RADSTONE_PPC7D
602 bool "Radstone Technology PPC7D board"
608 bool "Synergy-Gemini"
611 Select Gemini if configuring for a Synergy Microsystems' Gemini
612 series Single Board Computer. More information is available at:
613 <http://www.synergymicro.com/PressRel/97_10_15.html>.
618 The EST8260 is a single-board computer manufactured by Wind River
619 Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
620 the MPC8260. Wind River Systems has a website at
621 <http://www.windriver.com/>, but the EST8260 cannot be found on it
622 and has probably been discontinued or rebadged.
627 SBC PowerQUICC II, single-board computer with MPC82xx CPU
628 Manufacturer: Wind River Systems, Inc.
629 Date of Release: May 2003
631 URL: <http://www.windriver.com/>
642 MPC8260 based module, little larger than credit card,
643 up to 128 MB global + 64 MB local RAM, 32 MB Flash,
644 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
645 2 x serial ports, ...
646 Manufacturer: TQ Components, www.tq-group.de
647 Date of Release: June 2001
648 End of Life: not yet :-)
649 URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
655 bool "Freescale-PQ2FADS"
657 Select PQ2FADS if you wish to configure for a Freescale
658 PQ2FADS board (-VR or -ZU).
661 bool "Freescale LITE5200 / (IceCube)"
664 Support for the LITE5200 dev board for the MPC5200 from Freescale.
665 This is for the LITE5200 version 2.0 board. Don't know if it changes
666 much but it's only been tested on this board version. I think this
667 board is also known as IceCube.
670 bool "Freescale MPC834x SYS"
672 This option enables support for the MPC 834x SYS evaluation board.
683 depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
688 depends on 8xx || 8260
695 bool "CPM2 Support" if WILLOW
697 default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
699 The MPC8260 is a typical embedded CPU made by Motorola. Selecting
700 this option means that you wish to build a kernel for a machine with
709 The MPC8272 CPM has a different internal dpram setup than other CPM2
714 default y if MPC834x_SYS
718 default y if MPC834x_SYS
722 depends on 8260 || MPC8560 || MPC8555
725 The CPM2 (Communications Processor Module) is a coprocessor on
726 embedded CPUs made by Motorola. Selecting this option means that
727 you wish to build a kernel for a machine with a CPM2 coprocessor
728 on it (826x, 827x, 8560).
732 depends on PPC_MULTIPLATFORM
737 depends on PPC_MULTIPLATFORM
742 depends on PPC_PMAC && POWER4
747 depends on PPC_MULTIPLATFORM
752 depends on PPC_PMAC || PPC_CHRP
757 depends on SANDPOINT || SPRUCE || PPLUS || \
758 PRPMC750 || PRPMC800 || LOPEC || \
759 (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
765 depends on 6xx && POWERPMC250
770 depends on EV64260 || CPCI690
773 config MV64360 # Really MV64360 & MV64460
775 depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
780 depends on (GT64260 || MV64360)
783 menu "Set bridge options"
786 config NOT_COHERENT_CACHE
787 bool "Turn off Cache Coherency"
790 Some 64x60 bridges lock up when trying to enforce cache coherency.
791 When this option is selected, cache coherency will be turned off.
792 Note that this can cause other problems (e.g., stale data being
793 speculatively loaded via a cached mapping). Use at your own risk.
796 hex "Set bridge base used by firmware"
799 A firmware can leave the base address of the bridge's registers at
800 a non-standard location. If so, set this value to reflect the
801 address of that non-standard location.
803 config MV64X60_NEW_BASE
804 hex "Set bridge base used by kernel"
807 If the current base address of the bridge's registers is not where
808 you want it, set this value to the address that you want it moved to.
812 config NONMONARCH_SUPPORT
813 bool "Enable Non-Monarch Support"
821 config EPIC_SERIAL_MODE
823 depends on 6xx && (LOPEC || SANDPOINT)
828 depends on POWERPMC250 || LOPEC || SANDPOINT
831 config MPC10X_OPENPIC
833 depends on POWERPMC250 || LOPEC || SANDPOINT
836 config MPC10X_STORE_GATHERING
837 bool "Enable MPC10x store gathering"
838 depends on MPC10X_BRIDGE
840 config SANDPOINT_ENABLE_UART1
841 bool "Enable DUART mode on Sandpoint"
844 If this option is enabled then the MPC824x processor will run
845 in DUART mode instead of UART mode.
847 config HARRIER_STORE_GATHERING
848 bool "Enable Harrier store gathering"
851 config MVME5100_IPMC761_PRESENT
852 bool "MVME5100 configured with an IPMC761"
855 config SPRUCE_BAUD_33M
856 bool "Spruce baud clock support"
860 bool "PC PS/2 style Keyboard"
861 depends on 4xx || CPM2
864 bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
865 default y if PPC_PREP
868 depends on PPC_STD_MMU
869 bool "Symmetric multi-processing support"
871 This enables support for systems with more than one CPU. If you have
872 a system with only one CPU, say N. If you have a system with more
873 than one CPU, say Y. Note that the kernel does not currently
874 support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
875 since they have inadequate hardware support for multiprocessor
878 If you say N here, the kernel will run on single and multiprocessor
879 machines, but will use only one CPU of a multiprocessor machine. If
880 you say Y here, the kernel will run on single-processor machines.
881 On a single-processor machine, the kernel will run faster if you say
884 If you don't know what to do here, say N.
887 bool "Distribute interrupts on all CPUs by default"
888 depends on SMP && !MV64360
890 This option gives the kernel permission to distribute IRQs across
891 multiple CPUs. Saying N here will route all IRQs to the first
892 CPU. Generally saying Y is safe, although some problems have been
893 reported with SMP Power Macintoshes with this option enabled.
896 int "Maximum number of CPUs (2-32)"
902 bool "High memory support"
904 source kernel/Kconfig.hz
905 source kernel/Kconfig.preempt
908 source "fs/Kconfig.binfmt"
910 config PROC_DEVICETREE
911 bool "Support for Open Firmware device tree in /proc"
912 depends on PPC_OF && PROC_FS
914 This option adds a device-tree directory under /proc which contains
915 an image of the device tree that the kernel copies from Open
916 Firmware. If unsure, say Y here.
919 bool "Support for PReP Residual Data"
922 Some PReP systems have residual data passed to the kernel by the
923 firmware. This allows detection of memory size, devices present and
924 other useful pieces of information. Sometimes this information is
925 not present or incorrect, in which case it could lead to the machine
926 behaving incorrectly. If this happens, either disable PREP_RESIDUAL
927 or pass the 'noresidual' option to the kernel.
929 If you are running a PReP system, say Y here, otherwise say N.
931 config PROC_PREPRESIDUAL
932 bool "Support for reading of PReP Residual Data in /proc"
933 depends on PREP_RESIDUAL && PROC_FS
935 Enabling this option will create a /proc/residual file which allows
936 you to get at the residual data on PReP systems. You will need a tool
937 (lsresidual) to parse it. If you aren't on a PReP system, you don't
941 bool "Default bootloader kernel arguments"
944 string "Initial kernel command string"
945 depends on CMDLINE_BOOL
946 default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
948 On some platforms, there is currently no way for the boot loader to
949 pass arguments to the kernel. For these platforms, you can supply
950 some command-line options at build time by entering them here. In
951 most cases you will need to specify the root device here.
958 This option enables support for the Amiga series of computers.
965 This enables support for the Zorro bus in the Amiga. If you have
966 expansion cards in your Amiga that conform to the Amiga
967 AutoConfig(tm) specification, say Y, otherwise N. Note that even
968 expansion cards that do not fit in the Zorro slots but fit in e.g.
969 the CPU slot may fall in this category, so you have to say Y to let
972 config ABSTRACT_CONSOLE
977 config APUS_FAST_EXCEPT
983 bool "Amiga 1200/600 PCMCIA support"
984 depends on APUS && EXPERIMENTAL
986 Include support in the kernel for pcmcia on Amiga 1200 and Amiga
987 600. If you intend to use pcmcia cards say Y; otherwise say N.
989 config AMIGA_BUILTIN_SERIAL
990 tristate "Amiga builtin serial support"
993 If you want to use your Amiga's built-in serial port in Linux,
996 To compile this driver as a module, choose M here.
999 tristate "GVP IO-Extender support"
1002 If you want to use a GVP IO-Extender serial card in Linux, say Y.
1006 tristate "GVP IO-Extender parallel printer support"
1009 Say Y to enable driving a printer from the parallel port on your
1010 GVP IO-Extender card, N otherwise.
1012 config GVPIOEXT_PLIP
1013 tristate "GVP IO-Extender PLIP support"
1016 Say Y to enable doing IP over the parallel port on your GVP
1017 IO-Extender card, N otherwise.
1019 config MULTIFACE_III_TTY
1020 tristate "Multiface Card III serial support"
1023 If you want to use a Multiface III card's serial port in Linux,
1026 To compile this driver as a module, choose M here.
1029 tristate "Commodore A2232 serial support (EXPERIMENTAL)"
1030 depends on EXPERIMENTAL && APUS
1032 This option supports the 2232 7-port serial card shipped with the
1033 Amiga 2000 and other Zorro-bus machines, dating from 1989. At
1034 a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
1035 each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
1036 ports were connected with 8 pin DIN connectors on the card bracket,
1037 for which 8 pin to DB25 adapters were supplied. The card also had
1038 jumpers internally to toggle various pinning configurations.
1040 This driver can be built as a module; but then "generic_serial"
1041 will also be built as a module. This has to be loaded before
1042 "ser_a2232". If you want to do this, answer M here.
1044 config WHIPPET_SERIAL
1045 tristate "Hisoft Whippet PCMCIA serial support"
1046 depends on AMIGA_PCMCIA
1048 HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
1049 is no listing for the Whippet in their Amiga section.
1052 tristate "PCMCIA NE2000 support"
1053 depends on AMIGA_PCMCIA
1055 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
1058 To compile this driver as a module, choose M here: the
1059 module will be called apne.
1061 config SERIAL_CONSOLE
1062 bool "Support for serial port console"
1063 depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
1066 bool "Use power LED as a heartbeat"
1069 Use the power-on LED on your machine as a load meter. The exact
1070 behavior is platform-dependent, but normally the flash frequency is
1071 a hyperbolic function of the 5-minute load average.
1073 config PROC_HARDWARE
1074 bool "/proc/hardware support"
1077 source "drivers/zorro/Kconfig"
1080 source kernel/power/Kconfig
1084 bool "Enable seccomp to safely compute untrusted bytecode"
1088 This kernel feature is useful for number crunching applications
1089 that may need to compute untrusted bytecode during their
1090 execution. By using pipes or other transports made available to
1091 the process as file descriptors supporting the read/write
1092 syscalls, it's possible to isolate those applications in
1093 their own address space using seccomp. Once seccomp is
1094 enabled via /proc/<pid>/seccomp, it cannot be disabled
1095 and the task is only allowed to execute a few safe syscalls
1096 defined by each seccomp mode.
1098 If unsure, say Y. Only embedded should say N here.
1109 bool "Support for ISA-bus hardware"
1110 depends on PPC_PREP || PPC_CHRP
1112 Find out whether you have ISA slots on your motherboard. ISA is the
1113 name of a bus system, i.e. the way the CPU talks to the other stuff
1114 inside your box. If you have an Apple machine, say N here; if you
1115 have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
1116 you have an embedded board, consult your board documentation.
1118 config GENERIC_ISA_DMA
1120 depends on POWER3 || POWER4 || 6xx && !CPM2
1126 The Extended Industry Standard Architecture (EISA) bus is a bus
1127 architecture used on some older intel-based PCs.
1132 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
1137 bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
1138 default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
1139 default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
1140 default PCI_QSPAN if !4xx && !CPM2 && 8xx
1142 Find out whether your system includes a PCI bus. PCI is the name of
1143 a bus system, i.e. the way the CPU talks to the other stuff inside
1144 your box. If you say Y here, the kernel will include drivers and
1145 infrastructure code to support PCI bus devices.
1153 depends on !4xx && !CPM2 && 8xx
1155 Say Y here if you have a system based on a Motorola 8xx-series
1156 embedded processor with a QSPAN PCI interface, otherwise say N.
1160 depends on PCI && 8260
1164 bool " Enable workaround for MPC826x erratum PCI 9"
1165 depends on PCI_8260 && !ADS8272
1169 prompt " IDMA channel for PCI 9 workaround"
1170 depends on 8260_PCI9
1172 config 8260_PCI9_IDMA1
1175 config 8260_PCI9_IDMA2
1178 config 8260_PCI9_IDMA3
1181 config 8260_PCI9_IDMA4
1187 bool "PCI for Permedia2"
1188 depends on !4xx && !8xx && APUS
1190 source "drivers/pci/Kconfig"
1192 source "drivers/pcmcia/Kconfig"
1196 menu "Advanced setup"
1198 config ADVANCED_OPTIONS
1199 bool "Prompt for advanced kernel configuration options"
1201 This option will enable prompting for a variety of advanced kernel
1202 configuration options. These options can cause the kernel to not
1203 work if they are set incorrectly, but can be used to optimize certain
1204 aspects of kernel memory management.
1206 Unless you know what you are doing, say N here.
1208 comment "Default settings for advanced configuration options are used"
1209 depends on !ADVANCED_OPTIONS
1211 config HIGHMEM_START_BOOL
1212 bool "Set high memory pool address"
1213 depends on ADVANCED_OPTIONS && HIGHMEM
1215 This option allows you to set the base address of the kernel virtual
1216 area used to map high memory pages. This can be useful in
1217 optimizing the layout of kernel virtual memory.
1219 Say N here unless you know what you are doing.
1221 config HIGHMEM_START
1222 hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
1223 default "0xfe000000"
1225 config LOWMEM_SIZE_BOOL
1226 bool "Set maximum low memory"
1227 depends on ADVANCED_OPTIONS
1229 This option allows you to set the maximum amount of memory which
1230 will be used as "low memory", that is, memory which the kernel can
1231 access directly, without having to set up a kernel virtual mapping.
1232 This can be useful in optimizing the layout of kernel virtual
1235 Say N here unless you know what you are doing.
1238 hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
1239 default "0x30000000"
1241 config KERNEL_START_BOOL
1242 bool "Set custom kernel base address"
1243 depends on ADVANCED_OPTIONS
1245 This option allows you to set the kernel virtual address at which
1246 the kernel will map low memory (the kernel image will be linked at
1247 this address). This can be useful in optimizing the virtual memory
1248 layout of the system.
1250 Say N here unless you know what you are doing.
1253 hex "Virtual address of kernel base" if KERNEL_START_BOOL
1254 default "0xc0000000"
1256 config TASK_SIZE_BOOL
1257 bool "Set custom user task size"
1258 depends on ADVANCED_OPTIONS
1260 This option allows you to set the amount of virtual address space
1261 allocated to user tasks. This can be useful in optimizing the
1262 virtual memory layout of the system.
1264 Say N here unless you know what you are doing.
1267 hex "Size of user task space" if TASK_SIZE_BOOL
1268 default "0x80000000"
1270 config CONSISTENT_START_BOOL
1271 bool "Set custom consistent memory pool address"
1272 depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
1274 This option allows you to set the base virtual address
1275 of the the consistent memory pool. This pool of virtual
1276 memory is used to make consistent memory allocations.
1278 config CONSISTENT_START
1279 hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
1280 default "0xff100000" if NOT_COHERENT_CACHE
1282 config CONSISTENT_SIZE_BOOL
1283 bool "Set custom consistent memory pool size"
1284 depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
1286 This option allows you to set the size of the the
1287 consistent memory pool. This pool of virtual memory
1288 is used to make consistent memory allocations.
1290 config CONSISTENT_SIZE
1291 hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
1292 default "0x00200000" if NOT_COHERENT_CACHE
1294 config BOOT_LOAD_BOOL
1295 bool "Set the boot link/load address"
1296 depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
1298 This option allows you to set the initial load address of the zImage
1299 or zImage.initrd file. This can be useful if you are on a board
1300 which has a small amount of memory.
1302 Say N here unless you know what you are doing.
1305 hex "Link/load address for booting" if BOOT_LOAD_BOOL
1306 default "0x00400000" if 40x || 8xx || 8260
1307 default "0x01000000" if 44x
1308 default "0x00800000"
1311 bool "Pinned Kernel TLBs (860 ONLY)"
1312 depends on ADVANCED_OPTIONS && 8xx
1315 source "net/Kconfig"
1317 source "drivers/Kconfig"
1321 source "arch/ppc/8xx_io/Kconfig"
1323 source "arch/ppc/8260_io/Kconfig"
1326 menu "IBM 40x options"
1330 bool "SICC Serial port"
1333 config UART1_DFLT_CONSOLE
1335 depends on SERIAL_SICC && UART0_TTYS1
1338 config SERIAL_SICC_CONSOLE
1340 depends on SERIAL_SICC && UART0_TTYS1
1345 source "lib/Kconfig"
1347 source "arch/ppc/oprofile/Kconfig"
1349 source "arch/ppc/Kconfig.debug"
1351 source "security/Kconfig"
1353 source "crypto/Kconfig"
projects / linux-2.6 / blob