Merge branch 'linux-2.6'
[linux-2.6] / drivers / hwmon / ds1621.c
1 /*
2     ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
3              monitoring
4     Christian W. Zuckschwerdt  <zany@triq.net>  2000-11-23
5     based on lm75.c by Frodo Looijaard <frodol@dds.nl>
6     Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with 
7     the help of Jean Delvare <khali@linux-fr.org>
8
9     This program is free software; you can redistribute it and/or modify
10     it under the terms of the GNU General Public License as published by
11     the Free Software Foundation; either version 2 of the License, or
12     (at your option) any later version.
13
14     This program is distributed in the hope that it will be useful,
15     but WITHOUT ANY WARRANTY; without even the implied warranty of
16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17     GNU General Public License for more details.
18
19     You should have received a copy of the GNU General Public License
20     along with this program; if not, write to the Free Software
21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
34 #include "lm75.h"
35
36 /* Addresses to scan */
37 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
38                                         0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
39
40 /* Insmod parameters */
41 I2C_CLIENT_INSMOD_1(ds1621);
42 static int polarity = -1;
43 module_param(polarity, int, 0);
44 MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
45
46 /* Many DS1621 constants specified below */
47 /* Config register used for detection         */
48 /*  7    6    5    4    3    2    1    0      */
49 /* |Done|THF |TLF |NVB | X  | X  |POL |1SHOT| */
50 #define DS1621_REG_CONFIG_NVB           0x10
51 #define DS1621_REG_CONFIG_POLARITY      0x02
52 #define DS1621_REG_CONFIG_1SHOT         0x01
53 #define DS1621_REG_CONFIG_DONE          0x80
54
55 /* The DS1621 registers */
56 static const u8 DS1621_REG_TEMP[3] = {
57         0xAA,           /* input, word, RO */
58         0xA2,           /* min, word, RW */
59         0xA1,           /* max, word, RW */
60 };
61 #define DS1621_REG_CONF                 0xAC /* byte, RW */
62 #define DS1621_COM_START                0xEE /* no data */
63 #define DS1621_COM_STOP                 0x22 /* no data */
64
65 /* The DS1621 configuration register */
66 #define DS1621_ALARM_TEMP_HIGH          0x40
67 #define DS1621_ALARM_TEMP_LOW           0x20
68
69 /* Conversions */
70 #define ALARMS_FROM_REG(val) ((val) & \
71                               (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
72
73 /* Each client has this additional data */
74 struct ds1621_data {
75         struct i2c_client client;
76         struct device *hwmon_dev;
77         struct mutex update_lock;
78         char valid;                     /* !=0 if following fields are valid */
79         unsigned long last_updated;     /* In jiffies */
80
81         u16 temp[3];                    /* Register values, word */
82         u8 conf;                        /* Register encoding, combined */
83 };
84
85 static int ds1621_attach_adapter(struct i2c_adapter *adapter);
86 static int ds1621_detect(struct i2c_adapter *adapter, int address,
87                          int kind);
88 static void ds1621_init_client(struct i2c_client *client);
89 static int ds1621_detach_client(struct i2c_client *client);
90 static struct ds1621_data *ds1621_update_client(struct device *dev);
91
92 /* This is the driver that will be inserted */
93 static struct i2c_driver ds1621_driver = {
94         .driver = {
95                 .name   = "ds1621",
96         },
97         .attach_adapter = ds1621_attach_adapter,
98         .detach_client  = ds1621_detach_client,
99 };
100
101 /* All registers are word-sized, except for the configuration register.
102    DS1621 uses a high-byte first convention, which is exactly opposite to
103    the SMBus standard. */
104 static int ds1621_read_value(struct i2c_client *client, u8 reg)
105 {
106         if (reg == DS1621_REG_CONF)
107                 return i2c_smbus_read_byte_data(client, reg);
108         else
109                 return swab16(i2c_smbus_read_word_data(client, reg));
110 }
111
112 static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
113 {
114         if (reg == DS1621_REG_CONF)
115                 return i2c_smbus_write_byte_data(client, reg, value);
116         else
117                 return i2c_smbus_write_word_data(client, reg, swab16(value));
118 }
119
120 static void ds1621_init_client(struct i2c_client *client)
121 {
122         int reg = ds1621_read_value(client, DS1621_REG_CONF);
123         /* switch to continuous conversion mode */
124         reg &= ~ DS1621_REG_CONFIG_1SHOT;
125
126         /* setup output polarity */
127         if (polarity == 0)
128                 reg &= ~DS1621_REG_CONFIG_POLARITY;
129         else if (polarity == 1)
130                 reg |= DS1621_REG_CONFIG_POLARITY;
131         
132         ds1621_write_value(client, DS1621_REG_CONF, reg);
133         
134         /* start conversion */
135         i2c_smbus_write_byte(client, DS1621_COM_START);
136 }
137
138 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
139                          char *buf)
140 {
141         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
142         struct ds1621_data *data = ds1621_update_client(dev);
143         return sprintf(buf, "%d\n",
144                        LM75_TEMP_FROM_REG(data->temp[attr->index]));
145 }
146
147 static ssize_t set_temp(struct device *dev, struct device_attribute *da,
148                         const char *buf, size_t count)
149 {
150         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
151         struct i2c_client *client = to_i2c_client(dev);
152         struct ds1621_data *data = ds1621_update_client(dev);
153         u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
154
155         mutex_lock(&data->update_lock);
156         data->temp[attr->index] = val;
157         ds1621_write_value(client, DS1621_REG_TEMP[attr->index],
158                            data->temp[attr->index]);
159         mutex_unlock(&data->update_lock);
160         return count;
161 }
162
163 static ssize_t show_alarms(struct device *dev, struct device_attribute *da,
164                            char *buf)
165 {
166         struct ds1621_data *data = ds1621_update_client(dev);
167         return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
168 }
169
170 static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
171                           char *buf)
172 {
173         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
174         struct ds1621_data *data = ds1621_update_client(dev);
175         return sprintf(buf, "%d\n", !!(data->conf & attr->index));
176 }
177
178 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
179 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
180 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
181 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
182 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
183                 DS1621_ALARM_TEMP_LOW);
184 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
185                 DS1621_ALARM_TEMP_HIGH);
186
187 static struct attribute *ds1621_attributes[] = {
188         &sensor_dev_attr_temp1_input.dev_attr.attr,
189         &sensor_dev_attr_temp1_min.dev_attr.attr,
190         &sensor_dev_attr_temp1_max.dev_attr.attr,
191         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
192         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
193         &dev_attr_alarms.attr,
194         NULL
195 };
196
197 static const struct attribute_group ds1621_group = {
198         .attrs = ds1621_attributes,
199 };
200
201
202 static int ds1621_attach_adapter(struct i2c_adapter *adapter)
203 {
204         if (!(adapter->class & I2C_CLASS_HWMON))
205                 return 0;
206         return i2c_probe(adapter, &addr_data, ds1621_detect);
207 }
208
209 /* This function is called by i2c_probe */
210 static int ds1621_detect(struct i2c_adapter *adapter, int address,
211                          int kind)
212 {
213         int conf, temp;
214         struct i2c_client *client;
215         struct ds1621_data *data;
216         int i, err = 0;
217
218         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 
219                                      | I2C_FUNC_SMBUS_WORD_DATA 
220                                      | I2C_FUNC_SMBUS_WRITE_BYTE))
221                 goto exit;
222
223         /* OK. For now, we presume we have a valid client. We now create the
224            client structure, even though we cannot fill it completely yet.
225            But it allows us to access ds1621_{read,write}_value. */
226         if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
227                 err = -ENOMEM;
228                 goto exit;
229         }
230         
231         client = &data->client;
232         i2c_set_clientdata(client, data);
233         client->addr = address;
234         client->adapter = adapter;
235         client->driver = &ds1621_driver;
236
237         /* Now, we do the remaining detection. It is lousy. */
238         if (kind < 0) {
239                 /* The NVB bit should be low if no EEPROM write has been 
240                    requested during the latest 10ms, which is highly 
241                    improbable in our case. */
242                 conf = ds1621_read_value(client, DS1621_REG_CONF);
243                 if (conf & DS1621_REG_CONFIG_NVB)
244                         goto exit_free;
245                 /* The 7 lowest bits of a temperature should always be 0. */
246                 for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
247                         temp = ds1621_read_value(client, DS1621_REG_TEMP[i]);
248                         if (temp & 0x007f)
249                                 goto exit_free;
250                 }
251         }
252
253         /* Fill in remaining client fields and put it into the global list */
254         strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
255         mutex_init(&data->update_lock);
256
257         /* Tell the I2C layer a new client has arrived */
258         if ((err = i2c_attach_client(client)))
259                 goto exit_free;
260
261         /* Initialize the DS1621 chip */
262         ds1621_init_client(client);
263
264         /* Register sysfs hooks */
265         if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
266                 goto exit_detach;
267
268         data->hwmon_dev = hwmon_device_register(&client->dev);
269         if (IS_ERR(data->hwmon_dev)) {
270                 err = PTR_ERR(data->hwmon_dev);
271                 goto exit_remove_files;
272         }
273
274         return 0;
275
276       exit_remove_files:
277         sysfs_remove_group(&client->dev.kobj, &ds1621_group);
278       exit_detach:
279         i2c_detach_client(client);
280       exit_free:
281         kfree(data);
282       exit:
283         return err;
284 }
285
286 static int ds1621_detach_client(struct i2c_client *client)
287 {
288         struct ds1621_data *data = i2c_get_clientdata(client);
289         int err;
290
291         hwmon_device_unregister(data->hwmon_dev);
292         sysfs_remove_group(&client->dev.kobj, &ds1621_group);
293
294         if ((err = i2c_detach_client(client)))
295                 return err;
296
297         kfree(data);
298
299         return 0;
300 }
301
302
303 static struct ds1621_data *ds1621_update_client(struct device *dev)
304 {
305         struct i2c_client *client = to_i2c_client(dev);
306         struct ds1621_data *data = i2c_get_clientdata(client);
307         u8 new_conf;
308
309         mutex_lock(&data->update_lock);
310
311         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
312             || !data->valid) {
313                 int i;
314
315                 dev_dbg(&client->dev, "Starting ds1621 update\n");
316
317                 data->conf = ds1621_read_value(client, DS1621_REG_CONF);
318
319                 for (i = 0; i < ARRAY_SIZE(data->temp); i++)
320                         data->temp[i] = ds1621_read_value(client,
321                                                           DS1621_REG_TEMP[i]);
322
323                 /* reset alarms if necessary */
324                 new_conf = data->conf;
325                 if (data->temp[0] > data->temp[1])      /* input > min */
326                         new_conf &= ~DS1621_ALARM_TEMP_LOW;
327                 if (data->temp[0] < data->temp[2])      /* input < max */
328                         new_conf &= ~DS1621_ALARM_TEMP_HIGH;
329                 if (data->conf != new_conf)
330                         ds1621_write_value(client, DS1621_REG_CONF,
331                                            new_conf);
332
333                 data->last_updated = jiffies;
334                 data->valid = 1;
335         }
336
337         mutex_unlock(&data->update_lock);
338
339         return data;
340 }
341
342 static int __init ds1621_init(void)
343 {
344         return i2c_add_driver(&ds1621_driver);
345 }
346
347 static void __exit ds1621_exit(void)
348 {
349         i2c_del_driver(&ds1621_driver);
350 }
351
352
353 MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
354 MODULE_DESCRIPTION("DS1621 driver");
355 MODULE_LICENSE("GPL");
356
357 module_init(ds1621_init);
358 module_exit(ds1621_exit);