Automatic merge of /spare/repo/netdev-2.6 branch tlan
[linux-2.6] / arch / alpha / kernel / smc37c93x.c
1 /*
2  * SMC 37C93X initialization code
3  */
4
5 #include <linux/config.h>
6 #include <linux/kernel.h>
7
8 #include <linux/slab.h>
9 #include <linux/mm.h>
10 #include <linux/init.h>
11 #include <linux/delay.h>
12
13 #include <asm/hwrpb.h>
14 #include <asm/io.h>
15 #include <asm/segment.h>
16
17 #define SMC_DEBUG 0
18
19 #if SMC_DEBUG
20 # define DBG_DEVS(args)         printk args
21 #else
22 # define DBG_DEVS(args)
23 #endif
24
25 #define KB              1024
26 #define MB              (1024*KB)
27 #define GB              (1024*MB)
28
29 /* device "activate" register contents */
30 #define DEVICE_ON               1
31 #define DEVICE_OFF              0
32
33 /* configuration on/off keys */
34 #define CONFIG_ON_KEY           0x55
35 #define CONFIG_OFF_KEY          0xaa
36
37 /* configuration space device definitions */
38 #define FDC                     0
39 #define IDE1                    1
40 #define IDE2                    2
41 #define PARP                    3
42 #define SER1                    4
43 #define SER2                    5
44 #define RTCL                    6
45 #define KYBD                    7
46 #define AUXIO                   8
47
48 /* Chip register offsets from base */
49 #define CONFIG_CONTROL          0x02
50 #define INDEX_ADDRESS           0x03
51 #define LOGICAL_DEVICE_NUMBER   0x07
52 #define DEVICE_ID               0x20
53 #define DEVICE_REV              0x21
54 #define POWER_CONTROL           0x22
55 #define POWER_MGMT              0x23
56 #define OSC                     0x24
57
58 #define ACTIVATE                0x30
59 #define ADDR_HI                 0x60
60 #define ADDR_LO                 0x61
61 #define INTERRUPT_SEL           0x70
62 #define INTERRUPT_SEL_2         0x72 /* KYBD/MOUS only */
63 #define DMA_CHANNEL_SEL         0x74 /* FDC/PARP only */
64
65 #define FDD_MODE_REGISTER       0x90
66 #define FDD_OPTION_REGISTER     0x91
67
68 /* values that we read back that are expected ... */
69 #define VALID_DEVICE_ID         2
70
71 /* default device addresses */
72 #define KYBD_INTERRUPT          1
73 #define MOUS_INTERRUPT          12
74 #define COM2_BASE               0x2f8
75 #define COM2_INTERRUPT          3
76 #define COM1_BASE               0x3f8
77 #define COM1_INTERRUPT          4
78 #define PARP_BASE               0x3bc
79 #define PARP_INTERRUPT          7
80
81 static unsigned long __init SMCConfigState(unsigned long baseAddr)
82 {
83         unsigned char devId;
84         unsigned char devRev;
85
86         unsigned long configPort;
87         unsigned long indexPort;
88         unsigned long dataPort;
89
90         int i;
91
92         configPort = indexPort = baseAddr;
93         dataPort = configPort + 1;
94
95 #define NUM_RETRIES 5
96
97         for (i = 0; i < NUM_RETRIES; i++)
98         {
99                 outb(CONFIG_ON_KEY, configPort);
100                 outb(CONFIG_ON_KEY, configPort);
101                 outb(DEVICE_ID, indexPort);
102                 devId = inb(dataPort);
103                 if (devId == VALID_DEVICE_ID) {
104                         outb(DEVICE_REV, indexPort);
105                         devRev = inb(dataPort);
106                         break;
107                 }
108                 else
109                         udelay(100);
110         }
111         return (i != NUM_RETRIES) ? baseAddr : 0L;
112 }
113
114 static void __init SMCRunState(unsigned long baseAddr)
115 {
116         outb(CONFIG_OFF_KEY, baseAddr);
117 }
118
119 static unsigned long __init SMCDetectUltraIO(void)
120 {
121         unsigned long baseAddr;
122
123         baseAddr = 0x3F0;
124         if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x3F0 ) {
125                 return( baseAddr );
126         }
127         baseAddr = 0x370;
128         if ( ( baseAddr = SMCConfigState( baseAddr ) ) == 0x370 ) {
129                 return( baseAddr );
130         }
131         return( ( unsigned long )0 );
132 }
133
134 static void __init SMCEnableDevice(unsigned long baseAddr,
135                             unsigned long device,
136                             unsigned long portaddr,
137                             unsigned long interrupt)
138 {
139         unsigned long indexPort;
140         unsigned long dataPort;
141
142         indexPort = baseAddr;
143         dataPort = baseAddr + 1;
144
145         outb(LOGICAL_DEVICE_NUMBER, indexPort);
146         outb(device, dataPort);
147
148         outb(ADDR_LO, indexPort);
149         outb(( portaddr & 0xFF ), dataPort);
150
151         outb(ADDR_HI, indexPort);
152         outb((portaddr >> 8) & 0xFF, dataPort);
153
154         outb(INTERRUPT_SEL, indexPort);
155         outb(interrupt, dataPort);
156
157         outb(ACTIVATE, indexPort);
158         outb(DEVICE_ON, dataPort);
159 }
160
161 static void __init SMCEnableKYBD(unsigned long baseAddr)
162 {
163         unsigned long indexPort;
164         unsigned long dataPort;
165
166         indexPort = baseAddr;
167         dataPort = baseAddr + 1;
168
169         outb(LOGICAL_DEVICE_NUMBER, indexPort);
170         outb(KYBD, dataPort);
171
172         outb(INTERRUPT_SEL, indexPort); /* Primary interrupt select */
173         outb(KYBD_INTERRUPT, dataPort);
174
175         outb(INTERRUPT_SEL_2, indexPort); /* Secondary interrupt select */
176         outb(MOUS_INTERRUPT, dataPort);
177
178         outb(ACTIVATE, indexPort);
179         outb(DEVICE_ON, dataPort);
180 }
181
182 static void __init SMCEnableFDC(unsigned long baseAddr)
183 {
184         unsigned long indexPort;
185         unsigned long dataPort;
186
187         unsigned char oldValue;
188
189         indexPort = baseAddr;
190         dataPort = baseAddr + 1;
191
192         outb(LOGICAL_DEVICE_NUMBER, indexPort);
193         outb(FDC, dataPort);
194
195         outb(FDD_MODE_REGISTER, indexPort);
196         oldValue = inb(dataPort);
197
198         oldValue |= 0x0E;                   /* Enable burst mode */
199         outb(oldValue, dataPort);
200
201         outb(INTERRUPT_SEL, indexPort);     /* Primary interrupt select */
202         outb(0x06, dataPort );
203
204         outb(DMA_CHANNEL_SEL, indexPort);   /* DMA channel select */
205         outb(0x02, dataPort);
206
207         outb(ACTIVATE, indexPort);
208         outb(DEVICE_ON, dataPort);
209 }
210
211 #if SMC_DEBUG
212 static void __init SMCReportDeviceStatus(unsigned long baseAddr)
213 {
214         unsigned long indexPort;
215         unsigned long dataPort;
216         unsigned char currentControl;
217
218         indexPort = baseAddr;
219         dataPort = baseAddr + 1;
220
221         outb(POWER_CONTROL, indexPort);
222         currentControl = inb(dataPort);
223
224         printk(currentControl & (1 << FDC)
225                ? "\t+FDC Enabled\n" : "\t-FDC Disabled\n");
226         printk(currentControl & (1 << IDE1)
227                ? "\t+IDE1 Enabled\n" : "\t-IDE1 Disabled\n");
228         printk(currentControl & (1 << IDE2)
229                ? "\t+IDE2 Enabled\n" : "\t-IDE2 Disabled\n");
230         printk(currentControl & (1 << PARP)
231                ? "\t+PARP Enabled\n" : "\t-PARP Disabled\n");
232         printk(currentControl & (1 << SER1)
233                ? "\t+SER1 Enabled\n" : "\t-SER1 Disabled\n");
234         printk(currentControl & (1 << SER2)
235                ? "\t+SER2 Enabled\n" : "\t-SER2 Disabled\n");
236
237         printk( "\n" );
238 }
239 #endif
240
241 int __init SMC93x_Init(void)
242 {
243         unsigned long SMCUltraBase;
244         unsigned long flags;
245
246         local_irq_save(flags);
247         if ((SMCUltraBase = SMCDetectUltraIO()) != 0UL) {
248 #if SMC_DEBUG
249                 SMCReportDeviceStatus(SMCUltraBase);
250 #endif
251                 SMCEnableDevice(SMCUltraBase, SER1, COM1_BASE, COM1_INTERRUPT);
252                 DBG_DEVS(("SMC FDC37C93X: SER1 done\n"));
253                 SMCEnableDevice(SMCUltraBase, SER2, COM2_BASE, COM2_INTERRUPT);
254                 DBG_DEVS(("SMC FDC37C93X: SER2 done\n"));
255                 SMCEnableDevice(SMCUltraBase, PARP, PARP_BASE, PARP_INTERRUPT);
256                 DBG_DEVS(("SMC FDC37C93X: PARP done\n"));
257                 /* On PC164, IDE on the SMC is not enabled;
258                    CMD646 (PCI) on MB */
259                 SMCEnableKYBD(SMCUltraBase);
260                 DBG_DEVS(("SMC FDC37C93X: KYB done\n"));
261                 SMCEnableFDC(SMCUltraBase);
262                 DBG_DEVS(("SMC FDC37C93X: FDC done\n"));
263 #if SMC_DEBUG
264                 SMCReportDeviceStatus(SMCUltraBase);
265 #endif
266                 SMCRunState(SMCUltraBase);
267                 local_irq_restore(flags);
268                 printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
269                        SMCUltraBase);
270                 return 1;
271         }
272         else {
273                 local_irq_restore(flags);
274                 DBG_DEVS(("No SMC FDC37C93X Ultra I/O Controller found\n"));
275                 return 0;
276         }
277 }