git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/uhci-hcd.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
  13  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  14  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  15  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
  16  * (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
  17  *
  18  * Intel documents this fairly well, and as far as I know there
  19  * are no royalties or anything like that, but even so there are
  20  * people who decided that they want to do the same thing in a
  21  * completely different way.
  22  *
  23  */
  24
  25 #include <linux/module.h>
  26 #include <linux/pci.h>
  27 #include <linux/kernel.h>
  28 #include <linux/init.h>
  29 #include <linux/delay.h>
  30 #include <linux/ioport.h>
  31 #include <linux/sched.h>
  32 #include <linux/slab.h>
  33 #include <linux/errno.h>
  34 #include <linux/unistd.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/spinlock.h>
  37 #include <linux/debugfs.h>
  38 #include <linux/pm.h>
  39 #include <linux/dmapool.h>
  40 #include <linux/dma-mapping.h>
  41 #include <linux/usb.h>
  42 #include <linux/bitops.h>
  43 #include <linux/dmi.h>
  44
  45 #include <asm/uaccess.h>
  46 #include <asm/io.h>
  47 #include <asm/irq.h>
  48 #include <asm/system.h>
  49
  50 #include "../core/hcd.h"
  51 #include "uhci-hcd.h"
  52 #include "pci-quirks.h"
  53
  54 /*
  55  * Version Information
  56  */
  57 #define DRIVER_VERSION "v3.0"
  58 #define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
  59 Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
  60 Alan Stern"
  61 #define DRIVER_DESC "USB Universal Host Controller Interface driver"
  62
  63 /*
  64  * debug = 0, no debugging messages
  65  * debug = 1, dump failed URBs except for stalls
  66  * debug = 2, dump all failed URBs (including stalls)
  67  *            show all queues in /debug/uhci/[pci_addr]
  68  * debug = 3, show all TDs in URBs when dumping
  69  */
  70 #ifdef DEBUG
  71 #define DEBUG_CONFIGURED        1
  72 static int debug = 1;
  73 module_param(debug, int, S_IRUGO | S_IWUSR);
  74 MODULE_PARM_DESC(debug, "Debug level");
  75
  76 #else
  77 #define DEBUG_CONFIGURED        0
  78 #define debug                   0
  79 #endif
  80
  81 static char *errbuf;
  82 #define ERRBUF_LEN    (32 * 1024)
  83
  84 static kmem_cache_t *uhci_up_cachep;    /* urb_priv */
  85
  86 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
  87 static void wakeup_rh(struct uhci_hcd *uhci);
  88 static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
  89
  90 #include "uhci-debug.c"
  91 #include "uhci-q.c"
  92 #include "uhci-hub.c"
  93
  94 /*
  95  * Finish up a host controller reset and update the recorded state.
  96  */
  97 static void finish_reset(struct uhci_hcd *uhci)
  98 {
  99         int port;
 100
 101         /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
 102          * bits in the port status and control registers.
 103          * We have to clear them by hand.
 104          */
 105         for (port = 0; port < uhci->rh_numports; ++port)
 106                 outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
 107
 108         uhci->port_c_suspend = uhci->resuming_ports = 0;
 109         uhci->rh_state = UHCI_RH_RESET;
 110         uhci->is_stopped = UHCI_IS_STOPPED;
 111         uhci_to_hcd(uhci)->state = HC_STATE_HALT;
 112         uhci_to_hcd(uhci)->poll_rh = 0;
 113
 114         uhci->dead = 0;         /* Full reset resurrects the controller */
 115 }
 116
 117 /*
 118  * Last rites for a defunct/nonfunctional controller
 119  * or one we don't want to use any more.
 120  */
 121 static void uhci_hc_died(struct uhci_hcd *uhci)
 122 {
 123         uhci_get_current_frame_number(uhci);
 124         uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
 125         finish_reset(uhci);
 126         uhci->dead = 1;
 127
 128         /* The current frame may already be partway finished */
 129         ++uhci->frame_number;
 130 }
 131
 132 /*
 133  * Initialize a controller that was newly discovered or has lost power
 134  * or otherwise been reset while it was suspended.  In none of these cases
 135  * can we be sure of its previous state.
 136  */
 137 static void check_and_reset_hc(struct uhci_hcd *uhci)
 138 {
 139         if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
 140                 finish_reset(uhci);
 141 }
 142
 143 /*
 144  * Store the basic register settings needed by the controller.
 145  */
 146 static void configure_hc(struct uhci_hcd *uhci)
 147 {
 148         /* Set the frame length to the default: 1 ms exactly */
 149         outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
 150
 151         /* Store the frame list base address */
 152         outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
 153
 154         /* Set the current frame number */
 155         outw(uhci->frame_number & UHCI_MAX_SOF_NUMBER,
 156                         uhci->io_addr + USBFRNUM);
 157
 158         /* Mark controller as not halted before we enable interrupts */
 159         uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
 160         mb();
 161
 162         /* Enable PIRQ */
 163         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 164                         USBLEGSUP_DEFAULT);
 165 }
 166
 167
 168 static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 169 {
 170         int port;
 171
 172         switch (to_pci_dev(uhci_dev(uhci))->vendor) {
 173             default:
 174                 break;
 175
 176             case PCI_VENDOR_ID_GENESYS:
 177                 /* Genesys Logic's GL880S controllers don't generate
 178                  * resume-detect interrupts.
 179                  */
 180                 return 1;
 181
 182             case PCI_VENDOR_ID_INTEL:
 183                 /* Some of Intel's USB controllers have a bug that causes
 184                  * resume-detect interrupts if any port has an over-current
 185                  * condition.  To make matters worse, some motherboards
 186                  * hardwire unused USB ports' over-current inputs active!
 187                  * To prevent problems, we will not enable resume-detect
 188                  * interrupts if any ports are OC.
 189                  */
 190                 for (port = 0; port < uhci->rh_numports; ++port) {
 191                         if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
 192                                         USBPORTSC_OC)
 193                                 return 1;
 194                 }
 195                 break;
 196         }
 197         return 0;
 198 }
 199
 200 static int remote_wakeup_is_broken(struct uhci_hcd *uhci)
 201 {
 202         static struct dmi_system_id broken_wakeup_table[] = {
 203                 {
 204                         .ident = "Asus A7V8X",
 205                         .matches = {
 206                                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK"),
 207                                 DMI_MATCH(DMI_BOARD_NAME, "A7V8X"),
 208                                 DMI_MATCH(DMI_BOARD_VERSION, "REV 1.xx"),
 209                         }
 210                 },
 211                 { }
 212         };
 213         int port;
 214
 215         /* One of Asus's motherboards has a bug which causes it to
 216          * wake up immediately from suspend-to-RAM if any of the ports
 217          * are connected.  In such cases we will not set EGSM.
 218          */
 219         if (dmi_check_system(broken_wakeup_table)) {
 220                 for (port = 0; port < uhci->rh_numports; ++port) {
 221                         if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
 222                                         USBPORTSC_CCS)
 223                                 return 1;
 224                 }
 225         }
 226
 227         return 0;
 228 }
 229
 230 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
 231 __releases(uhci->lock)
 232 __acquires(uhci->lock)
 233 {
 234         int auto_stop;
 235         int int_enable, egsm_enable;
 236
 237         auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
 238         dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
 239                         "%s%s\n", __FUNCTION__,
 240                         (auto_stop ? " (auto-stop)" : ""));
 241
 242         /* If we get a suspend request when we're already auto-stopped
 243          * then there's nothing to do.
 244          */
 245         if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
 246                 uhci->rh_state = new_state;
 247                 return;
 248         }
 249
 250         /* Enable resume-detect interrupts if they work.
 251          * Then enter Global Suspend mode if _it_ works, still configured.
 252          */
 253         egsm_enable = USBCMD_EGSM;
 254         uhci->working_RD = 1;
 255         int_enable = USBINTR_RESUME;
 256         if (remote_wakeup_is_broken(uhci))
 257                 egsm_enable = 0;
 258         if (resume_detect_interrupts_are_broken(uhci) || !egsm_enable)
 259                 uhci->working_RD = int_enable = 0;
 260
 261         outw(int_enable, uhci->io_addr + USBINTR);
 262         outw(egsm_enable | USBCMD_CF, uhci->io_addr + USBCMD);
 263         mb();
 264         udelay(5);
 265
 266         /* If we're auto-stopping then no devices have been attached
 267          * for a while, so there shouldn't be any active URBs and the
 268          * controller should stop after a few microseconds.  Otherwise
 269          * we will give the controller one frame to stop.
 270          */
 271         if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) {
 272                 uhci->rh_state = UHCI_RH_SUSPENDING;
 273                 spin_unlock_irq(&uhci->lock);
 274                 msleep(1);
 275                 spin_lock_irq(&uhci->lock);
 276                 if (uhci->dead)
 277                         return;
 278         }
 279         if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
 280                 dev_warn(&uhci_to_hcd(uhci)->self.root_hub->dev,
 281                         "Controller not stopped yet!\n");
 282
 283         uhci_get_current_frame_number(uhci);
 284
 285         uhci->rh_state = new_state;
 286         uhci->is_stopped = UHCI_IS_STOPPED;
 287         uhci_to_hcd(uhci)->poll_rh = !int_enable;
 288
 289         uhci_scan_schedule(uhci);
 290         uhci_fsbr_off(uhci);
 291 }
 292
 293 static void start_rh(struct uhci_hcd *uhci)
 294 {
 295         uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
 296         uhci->is_stopped = 0;
 297
 298         /* Mark it configured and running with a 64-byte max packet.
 299          * All interrupts are enabled, even though RESUME won't do anything.
 300          */
 301         outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD);
 302         outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
 303                         uhci->io_addr + USBINTR);
 304         mb();
 305         uhci->rh_state = UHCI_RH_RUNNING;
 306         uhci_to_hcd(uhci)->poll_rh = 1;
 307 }
 308
 309 static void wakeup_rh(struct uhci_hcd *uhci)
 310 __releases(uhci->lock)
 311 __acquires(uhci->lock)
 312 {
 313         dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
 314                         "%s%s\n", __FUNCTION__,
 315                         uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
 316                                 " (auto-start)" : "");
 317
 318         /* If we are auto-stopped then no devices are attached so there's
 319          * no need for wakeup signals.  Otherwise we send Global Resume
 320          * for 20 ms.
 321          */
 322         if (uhci->rh_state == UHCI_RH_SUSPENDED) {
 323                 uhci->rh_state = UHCI_RH_RESUMING;
 324                 outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
 325                                 uhci->io_addr + USBCMD);
 326                 spin_unlock_irq(&uhci->lock);
 327                 msleep(20);
 328                 spin_lock_irq(&uhci->lock);
 329                 if (uhci->dead)
 330                         return;
 331
 332                 /* End Global Resume and wait for EOP to be sent */
 333                 outw(USBCMD_CF, uhci->io_addr + USBCMD);
 334                 mb();
 335                 udelay(4);
 336                 if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR)
 337                         dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
 338         }
 339
 340         start_rh(uhci);
 341
 342         /* Restart root hub polling */
 343         mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
 344 }
 345
 346 static irqreturn_t uhci_irq(struct usb_hcd *hcd)
 347 {
 348         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 349         unsigned short status;
 350         unsigned long flags;
 351
 352         /*
 353          * Read the interrupt status, and write it back to clear the
 354          * interrupt cause.  Contrary to the UHCI specification, the
 355          * "HC Halted" status bit is persistent: it is RO, not R/WC.
 356          */
 357         status = inw(uhci->io_addr + USBSTS);
 358         if (!(status & ~USBSTS_HCH))    /* shared interrupt, not mine */
 359                 return IRQ_NONE;
 360         outw(status, uhci->io_addr + USBSTS);           /* Clear it */
 361
 362         if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
 363                 if (status & USBSTS_HSE)
 364                         dev_err(uhci_dev(uhci), "host system error, "
 365                                         "PCI problems?\n");
 366                 if (status & USBSTS_HCPE)
 367                         dev_err(uhci_dev(uhci), "host controller process "
 368                                         "error, something bad happened!\n");
 369                 if (status & USBSTS_HCH) {
 370                         spin_lock_irqsave(&uhci->lock, flags);
 371                         if (uhci->rh_state >= UHCI_RH_RUNNING) {
 372                                 dev_err(uhci_dev(uhci),
 373                                         "host controller halted, "
 374                                         "very bad!\n");
 375                                 if (debug > 1 && errbuf) {
 376                                         /* Print the schedule for debugging */
 377                                         uhci_sprint_schedule(uhci,
 378                                                         errbuf, ERRBUF_LEN);
 379                                         lprintk(errbuf);
 380                                 }
 381                                 uhci_hc_died(uhci);
 382
 383                                 /* Force a callback in case there are
 384                                  * pending unlinks */
 385                                 mod_timer(&hcd->rh_timer, jiffies);
 386                         }
 387                         spin_unlock_irqrestore(&uhci->lock, flags);
 388                 }
 389         }
 390
 391         if (status & USBSTS_RD)
 392                 usb_hcd_poll_rh_status(hcd);
 393         else {
 394                 spin_lock_irqsave(&uhci->lock, flags);
 395                 uhci_scan_schedule(uhci);
 396                 spin_unlock_irqrestore(&uhci->lock, flags);
 397         }
 398
 399         return IRQ_HANDLED;
 400 }
 401
 402 /*
 403  * Store the current frame number in uhci->frame_number if the controller
 404  * is runnning.  Expand from 11 bits (of which we use only 10) to a
 405  * full-sized integer.
 406  *
 407  * Like many other parts of the driver, this code relies on being polled
 408  * more than once per second as long as the controller is running.
 409  */
 410 static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
 411 {
 412         if (!uhci->is_stopped) {
 413                 unsigned delta;
 414
 415                 delta = (inw(uhci->io_addr + USBFRNUM) - uhci->frame_number) &
 416                                 (UHCI_NUMFRAMES - 1);
 417                 uhci->frame_number += delta;
 418         }
 419 }
 420
 421 /*
 422  * De-allocate all resources
 423  */
 424 static void release_uhci(struct uhci_hcd *uhci)
 425 {
 426         int i;
 427
 428         if (DEBUG_CONFIGURED) {
 429                 spin_lock_irq(&uhci->lock);
 430                 uhci->is_initialized = 0;
 431                 spin_unlock_irq(&uhci->lock);
 432
 433                 debugfs_remove(uhci->dentry);
 434         }
 435
 436         for (i = 0; i < UHCI_NUM_SKELQH; i++)
 437                 uhci_free_qh(uhci, uhci->skelqh[i]);
 438
 439         uhci_free_td(uhci, uhci->term_td);
 440
 441         dma_pool_destroy(uhci->qh_pool);
 442
 443         dma_pool_destroy(uhci->td_pool);
 444
 445         kfree(uhci->frame_cpu);
 446
 447         dma_free_coherent(uhci_dev(uhci),
 448                         UHCI_NUMFRAMES * sizeof(*uhci->frame),
 449                         uhci->frame, uhci->frame_dma_handle);
 450 }
 451
 452 static int uhci_init(struct usb_hcd *hcd)
 453 {
 454         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 455         unsigned io_size = (unsigned) hcd->rsrc_len;
 456         int port;
 457
 458         uhci->io_addr = (unsigned long) hcd->rsrc_start;
 459
 460         /* The UHCI spec says devices must have 2 ports, and goes on to say
 461          * they may have more but gives no way to determine how many there
 462          * are.  However according to the UHCI spec, Bit 7 of the port
 463          * status and control register is always set to 1.  So we try to
 464          * use this to our advantage.  Another common failure mode when
 465          * a nonexistent register is addressed is to return all ones, so
 466          * we test for that also.
 467          */
 468         for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
 469                 unsigned int portstatus;
 470
 471                 portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
 472                 if (!(portstatus & 0x0080) || portstatus == 0xffff)
 473                         break;
 474         }
 475         if (debug)
 476                 dev_info(uhci_dev(uhci), "detected %d ports\n", port);
 477
 478         /* Anything greater than 7 is weird so we'll ignore it. */
 479         if (port > UHCI_RH_MAXCHILD) {
 480                 dev_info(uhci_dev(uhci), "port count misdetected? "
 481                                 "forcing to 2 ports\n");
 482                 port = 2;
 483         }
 484         uhci->rh_numports = port;
 485
 486         /* Kick BIOS off this hardware and reset if the controller
 487          * isn't already safely quiescent.
 488          */
 489         check_and_reset_hc(uhci);
 490         return 0;
 491 }
 492
 493 /* Make sure the controller is quiescent and that we're not using it
 494  * any more.  This is mainly for the benefit of programs which, like kexec,
 495  * expect the hardware to be idle: not doing DMA or generating IRQs.
 496  *
 497  * This routine may be called in a damaged or failing kernel.  Hence we
 498  * do not acquire the spinlock before shutting down the controller.
 499  */
 500 static void uhci_shutdown(struct pci_dev *pdev)
 501 {
 502         struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
 503
 504         uhci_hc_died(hcd_to_uhci(hcd));
 505 }
 506
 507 /*
 508  * Allocate a frame list, and then setup the skeleton
 509  *
 510  * The hardware doesn't really know any difference
 511  * in the queues, but the order does matter for the
 512  * protocols higher up. The order is:
 513  *
 514  *  - any isochronous events handled before any
 515  *    of the queues. We don't do that here, because
 516  *    we'll create the actual TD entries on demand.
 517  *  - The first queue is the interrupt queue.
 518  *  - The second queue is the control queue, split into low- and full-speed
 519  *  - The third queue is bulk queue.
 520  *  - The fourth queue is the bandwidth reclamation queue, which loops back
 521  *    to the full-speed control queue.
 522  */
 523 static int uhci_start(struct usb_hcd *hcd)
 524 {
 525         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 526         int retval = -EBUSY;
 527         int i;
 528         struct dentry *dentry;
 529
 530         hcd->uses_new_polling = 1;
 531
 532         spin_lock_init(&uhci->lock);
 533         setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout,
 534                         (unsigned long) uhci);
 535         INIT_LIST_HEAD(&uhci->idle_qh_list);
 536         init_waitqueue_head(&uhci->waitqh);
 537
 538         if (DEBUG_CONFIGURED) {
 539                 dentry = debugfs_create_file(hcd->self.bus_name,
 540                                 S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root,
 541                                 uhci, &uhci_debug_operations);
 542                 if (!dentry) {
 543                         dev_err(uhci_dev(uhci), "couldn't create uhci "
 544                                         "debugfs entry\n");
 545                         retval = -ENOMEM;
 546                         goto err_create_debug_entry;
 547                 }
 548                 uhci->dentry = dentry;
 549         }
 550
 551         uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
 552                         UHCI_NUMFRAMES * sizeof(*uhci->frame),
 553                         &uhci->frame_dma_handle, 0);
 554         if (!uhci->frame) {
 555                 dev_err(uhci_dev(uhci), "unable to allocate "
 556                                 "consistent memory for frame list\n");
 557                 goto err_alloc_frame;
 558         }
 559         memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
 560
 561         uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
 562                         GFP_KERNEL);
 563         if (!uhci->frame_cpu) {
 564                 dev_err(uhci_dev(uhci), "unable to allocate "
 565                                 "memory for frame pointers\n");
 566                 goto err_alloc_frame_cpu;
 567         }
 568
 569         uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
 570                         sizeof(struct uhci_td), 16, 0);
 571         if (!uhci->td_pool) {
 572                 dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
 573                 goto err_create_td_pool;
 574         }
 575
 576         uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
 577                         sizeof(struct uhci_qh), 16, 0);
 578         if (!uhci->qh_pool) {
 579                 dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
 580                 goto err_create_qh_pool;
 581         }
 582
 583         uhci->term_td = uhci_alloc_td(uhci);
 584         if (!uhci->term_td) {
 585                 dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
 586                 goto err_alloc_term_td;
 587         }
 588
 589         for (i = 0; i < UHCI_NUM_SKELQH; i++) {
 590                 uhci->skelqh[i] = uhci_alloc_qh(uhci, NULL, NULL);
 591                 if (!uhci->skelqh[i]) {
 592                         dev_err(uhci_dev(uhci), "unable to allocate QH\n");
 593                         goto err_alloc_skelqh;
 594                 }
 595         }
 596
 597         /*
 598          * 8 Interrupt queues; link all higher int queues to int1,
 599          * then link int1 to control and control to bulk
 600          */
 601         uhci->skel_int128_qh->link =
 602                         uhci->skel_int64_qh->link =
 603                         uhci->skel_int32_qh->link =
 604                         uhci->skel_int16_qh->link =
 605                         uhci->skel_int8_qh->link =
 606                         uhci->skel_int4_qh->link =
 607                         uhci->skel_int2_qh->link = UHCI_PTR_QH |
 608                         cpu_to_le32(uhci->skel_int1_qh->dma_handle);
 609
 610         uhci->skel_int1_qh->link = UHCI_PTR_QH |
 611                         cpu_to_le32(uhci->skel_ls_control_qh->dma_handle);
 612         uhci->skel_ls_control_qh->link = UHCI_PTR_QH |
 613                         cpu_to_le32(uhci->skel_fs_control_qh->dma_handle);
 614         uhci->skel_fs_control_qh->link = UHCI_PTR_QH |
 615                         cpu_to_le32(uhci->skel_bulk_qh->dma_handle);
 616         uhci->skel_bulk_qh->link = UHCI_PTR_QH |
 617                         cpu_to_le32(uhci->skel_term_qh->dma_handle);
 618
 619         /* This dummy TD is to work around a bug in Intel PIIX controllers */
 620         uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
 621                 (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
 622         uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
 623
 624         uhci->skel_term_qh->link = UHCI_PTR_TERM;
 625         uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
 626
 627         /*
 628          * Fill the frame list: make all entries point to the proper
 629          * interrupt queue.
 630          *
 631          * The interrupt queues will be interleaved as evenly as possible.
 632          * There's not much to be done about period-1 interrupts; they have
 633          * to occur in every frame.  But we can schedule period-2 interrupts
 634          * in odd-numbered frames, period-4 interrupts in frames congruent
 635          * to 2 (mod 4), and so on.  This way each frame only has two
 636          * interrupt QHs, which will help spread out bandwidth utilization.
 637          */
 638         for (i = 0; i < UHCI_NUMFRAMES; i++) {
 639                 int irq;
 640
 641                 /*
 642                  * ffs (Find First bit Set) does exactly what we need:
 643                  * 1,3,5,...  => ffs = 0 => use skel_int2_qh = skelqh[8],
 644                  * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
 645                  * ffs >= 7 => not on any high-period queue, so use
 646                  *      skel_int1_qh = skelqh[9].
 647                  * Add UHCI_NUMFRAMES to insure at least one bit is set.
 648                  */
 649                 irq = 8 - (int) __ffs(i + UHCI_NUMFRAMES);
 650                 if (irq <= 1)
 651                         irq = 9;
 652
 653                 /* Only place we don't use the frame list routines */
 654                 uhci->frame[i] = UHCI_PTR_QH |
 655                                 cpu_to_le32(uhci->skelqh[irq]->dma_handle);
 656         }
 657
 658         /*
 659          * Some architectures require a full mb() to enforce completion of
 660          * the memory writes above before the I/O transfers in configure_hc().
 661          */
 662         mb();
 663
 664         configure_hc(uhci);
 665         uhci->is_initialized = 1;
 666         start_rh(uhci);
 667         return 0;
 668
 669 /*
 670  * error exits:
 671  */
 672 err_alloc_skelqh:
 673         for (i = 0; i < UHCI_NUM_SKELQH; i++) {
 674                 if (uhci->skelqh[i])
 675                         uhci_free_qh(uhci, uhci->skelqh[i]);
 676         }
 677
 678         uhci_free_td(uhci, uhci->term_td);
 679
 680 err_alloc_term_td:
 681         dma_pool_destroy(uhci->qh_pool);
 682
 683 err_create_qh_pool:
 684         dma_pool_destroy(uhci->td_pool);
 685
 686 err_create_td_pool:
 687         kfree(uhci->frame_cpu);
 688
 689 err_alloc_frame_cpu:
 690         dma_free_coherent(uhci_dev(uhci),
 691                         UHCI_NUMFRAMES * sizeof(*uhci->frame),
 692                         uhci->frame, uhci->frame_dma_handle);
 693
 694 err_alloc_frame:
 695         debugfs_remove(uhci->dentry);
 696
 697 err_create_debug_entry:
 698         return retval;
 699 }
 700
 701 static void uhci_stop(struct usb_hcd *hcd)
 702 {
 703         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 704
 705         spin_lock_irq(&uhci->lock);
 706         if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead)
 707                 uhci_hc_died(uhci);
 708         uhci_scan_schedule(uhci);
 709         spin_unlock_irq(&uhci->lock);
 710
 711         del_timer_sync(&uhci->fsbr_timer);
 712         release_uhci(uhci);
 713 }
 714
 715 #ifdef CONFIG_PM
 716 static int uhci_rh_suspend(struct usb_hcd *hcd)
 717 {
 718         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 719         int rc = 0;
 720
 721         spin_lock_irq(&uhci->lock);
 722         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
 723                 rc = -ESHUTDOWN;
 724         else if (!uhci->dead)
 725                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
 726         spin_unlock_irq(&uhci->lock);
 727         return rc;
 728 }
 729
 730 static int uhci_rh_resume(struct usb_hcd *hcd)
 731 {
 732         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 733         int rc = 0;
 734
 735         spin_lock_irq(&uhci->lock);
 736         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 737                 dev_warn(&hcd->self.root_hub->dev, "HC isn't running!\n");
 738                 rc = -ESHUTDOWN;
 739         } else if (!uhci->dead)
 740                 wakeup_rh(uhci);
 741         spin_unlock_irq(&uhci->lock);
 742         return rc;
 743 }
 744
 745 static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
 746 {
 747         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 748         int rc = 0;
 749
 750         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 751
 752         spin_lock_irq(&uhci->lock);
 753         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
 754                 goto done_okay;         /* Already suspended or dead */
 755
 756         if (uhci->rh_state > UHCI_RH_SUSPENDED) {
 757                 dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
 758                 rc = -EBUSY;
 759                 goto done;
 760         };
 761
 762         /* All PCI host controllers are required to disable IRQ generation
 763          * at the source, so we must turn off PIRQ.
 764          */
 765         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
 766         mb();
 767         hcd->poll_rh = 0;
 768
 769         /* FIXME: Enable non-PME# remote wakeup? */
 770
 771         /* make sure snapshot being resumed re-enumerates everything */
 772         if (message.event == PM_EVENT_PRETHAW)
 773                 uhci_hc_died(uhci);
 774
 775 done_okay:
 776         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 777 done:
 778         spin_unlock_irq(&uhci->lock);
 779         return rc;
 780 }
 781
 782 static int uhci_resume(struct usb_hcd *hcd)
 783 {
 784         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 785
 786         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 787
 788         /* Since we aren't in D3 any more, it's safe to set this flag
 789          * even if the controller was dead.
 790          */
 791         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 792         mb();
 793
 794         spin_lock_irq(&uhci->lock);
 795
 796         /* FIXME: Disable non-PME# remote wakeup? */
 797
 798         /* The firmware or a boot kernel may have changed the controller
 799          * settings during a system wakeup.  Check it and reconfigure
 800          * to avoid problems.
 801          */
 802         check_and_reset_hc(uhci);
 803
 804         /* If the controller was dead before, it's back alive now */
 805         configure_hc(uhci);
 806
 807         if (uhci->rh_state == UHCI_RH_RESET) {
 808
 809                 /* The controller had to be reset */
 810                 usb_root_hub_lost_power(hcd->self.root_hub);
 811                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
 812         }
 813
 814         spin_unlock_irq(&uhci->lock);
 815
 816         if (!uhci->working_RD) {
 817                 /* Suspended root hub needs to be polled */
 818                 hcd->poll_rh = 1;
 819                 usb_hcd_poll_rh_status(hcd);
 820         }
 821         return 0;
 822 }
 823 #endif
 824
 825 /* Wait until a particular device/endpoint's QH is idle, and free it */
 826 static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
 827                 struct usb_host_endpoint *hep)
 828 {
 829         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 830         struct uhci_qh *qh;
 831
 832         spin_lock_irq(&uhci->lock);
 833         qh = (struct uhci_qh *) hep->hcpriv;
 834         if (qh == NULL)
 835                 goto done;
 836
 837         while (qh->state != QH_STATE_IDLE) {
 838                 ++uhci->num_waiting;
 839                 spin_unlock_irq(&uhci->lock);
 840                 wait_event_interruptible(uhci->waitqh,
 841                                 qh->state == QH_STATE_IDLE);
 842                 spin_lock_irq(&uhci->lock);
 843                 --uhci->num_waiting;
 844         }
 845
 846         uhci_free_qh(uhci, qh);
 847 done:
 848         spin_unlock_irq(&uhci->lock);
 849 }
 850
 851 static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
 852 {
 853         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 854         unsigned frame_number;
 855         unsigned delta;
 856
 857         /* Minimize latency by avoiding the spinlock */
 858         frame_number = uhci->frame_number;
 859         barrier();
 860         delta = (inw(uhci->io_addr + USBFRNUM) - frame_number) &
 861                         (UHCI_NUMFRAMES - 1);
 862         return frame_number + delta;
 863 }
 864
 865 static const char hcd_name[] = "uhci_hcd";
 866
 867 static const struct hc_driver uhci_driver = {
 868         .description =          hcd_name,
 869         .product_desc =         "UHCI Host Controller",
 870         .hcd_priv_size =        sizeof(struct uhci_hcd),
 871
 872         /* Generic hardware linkage */
 873         .irq =                  uhci_irq,
 874         .flags =                HCD_USB11,
 875
 876         /* Basic lifecycle operations */
 877         .reset =                uhci_init,
 878         .start =                uhci_start,
 879 #ifdef CONFIG_PM
 880         .suspend =              uhci_suspend,
 881         .resume =               uhci_resume,
 882         .bus_suspend =          uhci_rh_suspend,
 883         .bus_resume =           uhci_rh_resume,
 884 #endif
 885         .stop =                 uhci_stop,
 886
 887         .urb_enqueue =          uhci_urb_enqueue,
 888         .urb_dequeue =          uhci_urb_dequeue,
 889
 890         .endpoint_disable =     uhci_hcd_endpoint_disable,
 891         .get_frame_number =     uhci_hcd_get_frame_number,
 892
 893         .hub_status_data =      uhci_hub_status_data,
 894         .hub_control =          uhci_hub_control,
 895 };
 896
 897 static const struct pci_device_id uhci_pci_ids[] = { {
 898         /* handle any USB UHCI controller */
 899         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
 900         .driver_data =  (unsigned long) &uhci_driver,
 901         }, { /* end: all zeroes */ }
 902 };
 903
 904 MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
 905
 906 static struct pci_driver uhci_pci_driver = {
 907         .name =         (char *)hcd_name,
 908         .id_table =     uhci_pci_ids,
 909
 910         .probe =        usb_hcd_pci_probe,
 911         .remove =       usb_hcd_pci_remove,
 912         .shutdown =     uhci_shutdown,
 913
 914 #ifdef  CONFIG_PM
 915         .suspend =      usb_hcd_pci_suspend,
 916         .resume =       usb_hcd_pci_resume,
 917 #endif  /* PM */
 918 };
 919
 920 static int __init uhci_hcd_init(void)
 921 {
 922         int retval = -ENOMEM;
 923
 924         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
 925
 926         if (usb_disabled())
 927                 return -ENODEV;
 928
 929         if (DEBUG_CONFIGURED) {
 930                 errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
 931                 if (!errbuf)
 932                         goto errbuf_failed;
 933                 uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
 934                 if (!uhci_debugfs_root)
 935                         goto debug_failed;
 936         }
 937
 938         uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
 939                 sizeof(struct urb_priv), 0, 0, NULL, NULL);
 940         if (!uhci_up_cachep)
 941                 goto up_failed;
 942
 943         retval = pci_register_driver(&uhci_pci_driver);
 944         if (retval)
 945                 goto init_failed;
 946
 947         return 0;
 948
 949 init_failed:
 950         kmem_cache_destroy(uhci_up_cachep);
 951
 952 up_failed:
 953         debugfs_remove(uhci_debugfs_root);
 954
 955 debug_failed:
 956         kfree(errbuf);
 957
 958 errbuf_failed:
 959
 960         return retval;
 961 }
 962
 963 static void __exit uhci_hcd_cleanup(void)
 964 {
 965         pci_unregister_driver(&uhci_pci_driver);
 966         kmem_cache_destroy(uhci_up_cachep);
 967         debugfs_remove(uhci_debugfs_root);
 968         kfree(errbuf);
 969 }
 970
 971 module_init(uhci_hcd_init);
 972 module_exit(uhci_hcd_cleanup);
 973
 974 MODULE_AUTHOR(DRIVER_AUTHOR);
 975 MODULE_DESCRIPTION(DRIVER_DESC);
 976 MODULE_LICENSE("GPL");