2 * Device probing and sysfs code.
4 * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software Foundation,
18 * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 #include <linux/module.h>
22 #include <linux/wait.h>
23 #include <linux/errno.h>
24 #include <linux/kthread.h>
25 #include <linux/device.h>
26 #include <linux/delay.h>
27 #include <linux/idr.h>
28 #include <linux/jiffies.h>
29 #include <linux/string.h>
30 #include <linux/rwsem.h>
31 #include <linux/semaphore.h>
32 #include <asm/system.h>
33 #include <linux/ctype.h>
34 #include "fw-transaction.h"
35 #include "fw-topology.h"
36 #include "fw-device.h"
38 void fw_csr_iterator_init(struct fw_csr_iterator *ci, u32 * p)
41 ci->end = ci->p + (p[0] >> 16);
43 EXPORT_SYMBOL(fw_csr_iterator_init);
45 int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value)
48 *value = *ci->p & 0xffffff;
50 return ci->p++ < ci->end;
52 EXPORT_SYMBOL(fw_csr_iterator_next);
54 static int is_fw_unit(struct device *dev);
56 static int match_unit_directory(u32 * directory, const struct fw_device_id *id)
58 struct fw_csr_iterator ci;
59 int key, value, match;
62 fw_csr_iterator_init(&ci, directory);
63 while (fw_csr_iterator_next(&ci, &key, &value)) {
64 if (key == CSR_VENDOR && value == id->vendor)
65 match |= FW_MATCH_VENDOR;
66 if (key == CSR_MODEL && value == id->model)
67 match |= FW_MATCH_MODEL;
68 if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
69 match |= FW_MATCH_SPECIFIER_ID;
70 if (key == CSR_VERSION && value == id->version)
71 match |= FW_MATCH_VERSION;
74 return (match & id->match_flags) == id->match_flags;
77 static int fw_unit_match(struct device *dev, struct device_driver *drv)
79 struct fw_unit *unit = fw_unit(dev);
80 struct fw_driver *driver = fw_driver(drv);
83 /* We only allow binding to fw_units. */
87 for (i = 0; driver->id_table[i].match_flags != 0; i++) {
88 if (match_unit_directory(unit->directory, &driver->id_table[i]))
95 static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
97 struct fw_device *device = fw_device(unit->device.parent);
98 struct fw_csr_iterator ci;
103 int specifier_id = 0;
106 fw_csr_iterator_init(&ci, &device->config_rom[5]);
107 while (fw_csr_iterator_next(&ci, &key, &value)) {
118 fw_csr_iterator_init(&ci, unit->directory);
119 while (fw_csr_iterator_next(&ci, &key, &value)) {
121 case CSR_SPECIFIER_ID:
122 specifier_id = value;
130 return snprintf(buffer, buffer_size,
131 "ieee1394:ven%08Xmo%08Xsp%08Xver%08X",
132 vendor, model, specifier_id, version);
136 fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env)
138 struct fw_unit *unit = fw_unit(dev);
141 get_modalias(unit, modalias, sizeof(modalias));
143 if (add_uevent_var(env, "MODALIAS=%s", modalias))
149 struct bus_type fw_bus_type = {
151 .match = fw_unit_match,
153 EXPORT_SYMBOL(fw_bus_type);
155 static void fw_device_release(struct device *dev)
157 struct fw_device *device = fw_device(dev);
158 struct fw_card *card = device->card;
162 * Take the card lock so we don't set this to NULL while a
163 * FW_NODE_UPDATED callback is being handled or while the
164 * bus manager work looks at this node.
166 spin_lock_irqsave(&card->lock, flags);
167 device->node->data = NULL;
168 spin_unlock_irqrestore(&card->lock, flags);
170 fw_node_put(device->node);
171 kfree(device->config_rom);
176 int fw_device_enable_phys_dma(struct fw_device *device)
178 int generation = device->generation;
180 /* device->node_id, accessed below, must not be older than generation */
183 return device->card->driver->enable_phys_dma(device->card,
187 EXPORT_SYMBOL(fw_device_enable_phys_dma);
189 struct config_rom_attribute {
190 struct device_attribute attr;
195 show_immediate(struct device *dev, struct device_attribute *dattr, char *buf)
197 struct config_rom_attribute *attr =
198 container_of(dattr, struct config_rom_attribute, attr);
199 struct fw_csr_iterator ci;
201 int key, value, ret = -ENOENT;
203 down_read(&fw_device_rwsem);
206 dir = fw_unit(dev)->directory;
208 dir = fw_device(dev)->config_rom + 5;
210 fw_csr_iterator_init(&ci, dir);
211 while (fw_csr_iterator_next(&ci, &key, &value))
212 if (attr->key == key) {
213 ret = snprintf(buf, buf ? PAGE_SIZE : 0,
218 up_read(&fw_device_rwsem);
223 #define IMMEDIATE_ATTR(name, key) \
224 { __ATTR(name, S_IRUGO, show_immediate, NULL), key }
227 show_text_leaf(struct device *dev, struct device_attribute *dattr, char *buf)
229 struct config_rom_attribute *attr =
230 container_of(dattr, struct config_rom_attribute, attr);
231 struct fw_csr_iterator ci;
232 u32 *dir, *block = NULL, *p, *end;
233 int length, key, value, last_key = 0, ret = -ENOENT;
236 down_read(&fw_device_rwsem);
239 dir = fw_unit(dev)->directory;
241 dir = fw_device(dev)->config_rom + 5;
243 fw_csr_iterator_init(&ci, dir);
244 while (fw_csr_iterator_next(&ci, &key, &value)) {
245 if (attr->key == last_key &&
246 key == (CSR_DESCRIPTOR | CSR_LEAF))
247 block = ci.p - 1 + value;
254 length = min(block[0] >> 16, 256U);
258 if (block[1] != 0 || block[2] != 0)
259 /* Unknown encoding. */
268 end = &block[length + 1];
269 for (p = &block[3]; p < end; p++, b += 4)
270 * (u32 *) b = (__force u32) __cpu_to_be32(*p);
272 /* Strip trailing whitespace and add newline. */
273 while (b--, (isspace(*b) || *b == '\0') && b > buf);
277 up_read(&fw_device_rwsem);
282 #define TEXT_LEAF_ATTR(name, key) \
283 { __ATTR(name, S_IRUGO, show_text_leaf, NULL), key }
285 static struct config_rom_attribute config_rom_attributes[] = {
286 IMMEDIATE_ATTR(vendor, CSR_VENDOR),
287 IMMEDIATE_ATTR(hardware_version, CSR_HARDWARE_VERSION),
288 IMMEDIATE_ATTR(specifier_id, CSR_SPECIFIER_ID),
289 IMMEDIATE_ATTR(version, CSR_VERSION),
290 IMMEDIATE_ATTR(model, CSR_MODEL),
291 TEXT_LEAF_ATTR(vendor_name, CSR_VENDOR),
292 TEXT_LEAF_ATTR(model_name, CSR_MODEL),
293 TEXT_LEAF_ATTR(hardware_version_name, CSR_HARDWARE_VERSION),
297 init_fw_attribute_group(struct device *dev,
298 struct device_attribute *attrs,
299 struct fw_attribute_group *group)
301 struct device_attribute *attr;
304 for (j = 0; attrs[j].attr.name != NULL; j++)
305 group->attrs[j] = &attrs[j].attr;
307 for (i = 0; i < ARRAY_SIZE(config_rom_attributes); i++) {
308 attr = &config_rom_attributes[i].attr;
309 if (attr->show(dev, attr, NULL) < 0)
311 group->attrs[j++] = &attr->attr;
314 BUG_ON(j >= ARRAY_SIZE(group->attrs));
315 group->attrs[j++] = NULL;
316 group->groups[0] = &group->group;
317 group->groups[1] = NULL;
318 group->group.attrs = group->attrs;
319 dev->groups = group->groups;
323 modalias_show(struct device *dev,
324 struct device_attribute *attr, char *buf)
326 struct fw_unit *unit = fw_unit(dev);
329 length = get_modalias(unit, buf, PAGE_SIZE);
330 strcpy(buf + length, "\n");
336 rom_index_show(struct device *dev,
337 struct device_attribute *attr, char *buf)
339 struct fw_device *device = fw_device(dev->parent);
340 struct fw_unit *unit = fw_unit(dev);
342 return snprintf(buf, PAGE_SIZE, "%d\n",
343 (int)(unit->directory - device->config_rom));
346 static struct device_attribute fw_unit_attributes[] = {
348 __ATTR_RO(rom_index),
353 config_rom_show(struct device *dev, struct device_attribute *attr, char *buf)
355 struct fw_device *device = fw_device(dev);
358 down_read(&fw_device_rwsem);
359 length = device->config_rom_length * 4;
360 memcpy(buf, device->config_rom, length);
361 up_read(&fw_device_rwsem);
367 guid_show(struct device *dev, struct device_attribute *attr, char *buf)
369 struct fw_device *device = fw_device(dev);
372 down_read(&fw_device_rwsem);
373 ret = snprintf(buf, PAGE_SIZE, "0x%08x%08x\n",
374 device->config_rom[3], device->config_rom[4]);
375 up_read(&fw_device_rwsem);
380 static struct device_attribute fw_device_attributes[] = {
381 __ATTR_RO(config_rom),
387 read_rom(struct fw_device *device, int generation, int index, u32 *data)
391 /* device->node_id, accessed below, must not be older than generation */
394 rcode = fw_run_transaction(device->card, TCODE_READ_QUADLET_REQUEST,
395 device->node_id, generation, device->max_speed,
396 (CSR_REGISTER_BASE | CSR_CONFIG_ROM) + index * 4,
403 #define READ_BIB_ROM_SIZE 256
404 #define READ_BIB_STACK_SIZE 16
407 * Read the bus info block, perform a speed probe, and read all of the rest of
408 * the config ROM. We do all this with a cached bus generation. If the bus
409 * generation changes under us, read_bus_info_block will fail and get retried.
410 * It's better to start all over in this case because the node from which we
411 * are reading the ROM may have changed the ROM during the reset.
413 static int read_bus_info_block(struct fw_device *device, int generation)
415 u32 *rom, *stack, *old_rom, *new_rom;
417 int i, end, length, ret = -1;
419 rom = kmalloc(sizeof(*rom) * READ_BIB_ROM_SIZE +
420 sizeof(*stack) * READ_BIB_STACK_SIZE, GFP_KERNEL);
424 stack = &rom[READ_BIB_ROM_SIZE];
426 device->max_speed = SCODE_100;
428 /* First read the bus info block. */
429 for (i = 0; i < 5; i++) {
430 if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE)
433 * As per IEEE1212 7.2, during power-up, devices can
434 * reply with a 0 for the first quadlet of the config
435 * rom to indicate that they are booting (for example,
436 * if the firmware is on the disk of a external
437 * harddisk). In that case we just fail, and the
438 * retry mechanism will try again later.
440 if (i == 0 && rom[i] == 0)
444 device->max_speed = device->node->max_speed;
447 * Determine the speed of
448 * - devices with link speed less than PHY speed,
449 * - devices with 1394b PHY (unless only connected to 1394a PHYs),
450 * - all devices if there are 1394b repeaters.
451 * Note, we cannot use the bus info block's link_spd as starting point
452 * because some buggy firmwares set it lower than necessary and because
453 * 1394-1995 nodes do not have the field.
455 if ((rom[2] & 0x7) < device->max_speed ||
456 device->max_speed == SCODE_BETA ||
457 device->card->beta_repeaters_present) {
460 /* for S1600 and S3200 */
461 if (device->max_speed == SCODE_BETA)
462 device->max_speed = device->card->link_speed;
464 while (device->max_speed > SCODE_100) {
465 if (read_rom(device, generation, 0, &dummy) ==
473 * Now parse the config rom. The config rom is a recursive
474 * directory structure so we parse it using a stack of
475 * references to the blocks that make up the structure. We
476 * push a reference to the root directory on the stack to
481 stack[sp++] = 0xc0000005;
484 * Pop the next block reference of the stack. The
485 * lower 24 bits is the offset into the config rom,
486 * the upper 8 bits are the type of the reference the
491 if (i >= READ_BIB_ROM_SIZE)
493 * The reference points outside the standard
494 * config rom area, something's fishy.
498 /* Read header quadlet for the block to get the length. */
499 if (read_rom(device, generation, i, &rom[i]) != RCODE_COMPLETE)
501 end = i + (rom[i] >> 16) + 1;
503 if (end > READ_BIB_ROM_SIZE)
505 * This block extends outside standard config
506 * area (and the array we're reading it
507 * into). That's broken, so ignore this
513 * Now read in the block. If this is a directory
514 * block, check the entries as we read them to see if
515 * it references another block, and push it in that case.
518 if (read_rom(device, generation, i, &rom[i]) !=
521 if ((key >> 30) == 3 && (rom[i] >> 30) > 1 &&
522 sp < READ_BIB_STACK_SIZE)
523 stack[sp++] = i + rom[i];
530 old_rom = device->config_rom;
531 new_rom = kmemdup(rom, length * 4, GFP_KERNEL);
535 down_write(&fw_device_rwsem);
536 device->config_rom = new_rom;
537 device->config_rom_length = length;
538 up_write(&fw_device_rwsem);
542 device->cmc = rom[2] & 1 << 30;
549 static void fw_unit_release(struct device *dev)
551 struct fw_unit *unit = fw_unit(dev);
556 static struct device_type fw_unit_type = {
557 .uevent = fw_unit_uevent,
558 .release = fw_unit_release,
561 static int is_fw_unit(struct device *dev)
563 return dev->type == &fw_unit_type;
566 static void create_units(struct fw_device *device)
568 struct fw_csr_iterator ci;
569 struct fw_unit *unit;
573 fw_csr_iterator_init(&ci, &device->config_rom[5]);
574 while (fw_csr_iterator_next(&ci, &key, &value)) {
575 if (key != (CSR_UNIT | CSR_DIRECTORY))
579 * Get the address of the unit directory and try to
580 * match the drivers id_tables against it.
582 unit = kzalloc(sizeof(*unit), GFP_KERNEL);
584 fw_error("failed to allocate memory for unit\n");
588 unit->directory = ci.p + value - 1;
589 unit->device.bus = &fw_bus_type;
590 unit->device.type = &fw_unit_type;
591 unit->device.parent = &device->device;
592 dev_set_name(&unit->device, "%s.%d", dev_name(&device->device), i++);
594 init_fw_attribute_group(&unit->device,
596 &unit->attribute_group);
597 if (device_register(&unit->device) < 0)
607 static int shutdown_unit(struct device *device, void *data)
609 device_unregister(device);
615 * fw_device_rwsem acts as dual purpose mutex:
616 * - serializes accesses to fw_device_idr,
617 * - serializes accesses to fw_device.config_rom/.config_rom_length and
618 * fw_unit.directory, unless those accesses happen at safe occasions
620 DECLARE_RWSEM(fw_device_rwsem);
622 DEFINE_IDR(fw_device_idr);
625 struct fw_device *fw_device_get_by_devt(dev_t devt)
627 struct fw_device *device;
629 down_read(&fw_device_rwsem);
630 device = idr_find(&fw_device_idr, MINOR(devt));
632 fw_device_get(device);
633 up_read(&fw_device_rwsem);
639 * These defines control the retry behavior for reading the config
640 * rom. It shouldn't be necessary to tweak these; if the device
641 * doesn't respond to a config rom read within 10 seconds, it's not
642 * going to respond at all. As for the initial delay, a lot of
643 * devices will be able to respond within half a second after bus
644 * reset. On the other hand, it's not really worth being more
645 * aggressive than that, since it scales pretty well; if 10 devices
646 * are plugged in, they're all getting read within one second.
649 #define MAX_RETRIES 10
650 #define RETRY_DELAY (3 * HZ)
651 #define INITIAL_DELAY (HZ / 2)
652 #define SHUTDOWN_DELAY (2 * HZ)
654 static void fw_device_shutdown(struct work_struct *work)
656 struct fw_device *device =
657 container_of(work, struct fw_device, work.work);
658 int minor = MINOR(device->device.devt);
660 if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY)
661 && !list_empty(&device->card->link)) {
662 schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
666 if (atomic_cmpxchg(&device->state,
668 FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE)
671 fw_device_cdev_remove(device);
672 device_for_each_child(&device->device, NULL, shutdown_unit);
673 device_unregister(&device->device);
675 down_write(&fw_device_rwsem);
676 idr_remove(&fw_device_idr, minor);
677 up_write(&fw_device_rwsem);
679 fw_device_put(device);
682 static struct device_type fw_device_type = {
683 .release = fw_device_release,
686 static void fw_device_update(struct work_struct *work);
689 * If a device was pending for deletion because its node went away but its
690 * bus info block and root directory header matches that of a newly discovered
691 * device, revive the existing fw_device.
692 * The newly allocated fw_device becomes obsolete instead.
694 static int lookup_existing_device(struct device *dev, void *data)
696 struct fw_device *old = fw_device(dev);
697 struct fw_device *new = data;
698 struct fw_card *card = new->card;
701 down_read(&fw_device_rwsem); /* serialize config_rom access */
702 spin_lock_irq(&card->lock); /* serialize node access */
704 if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 &&
705 atomic_cmpxchg(&old->state,
707 FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
708 struct fw_node *current_node = new->node;
709 struct fw_node *obsolete_node = old->node;
711 new->node = obsolete_node;
712 new->node->data = new;
713 old->node = current_node;
714 old->node->data = old;
716 old->max_speed = new->max_speed;
717 old->node_id = current_node->node_id;
718 smp_wmb(); /* update node_id before generation */
719 old->generation = card->generation;
720 old->config_rom_retries = 0;
721 fw_notify("rediscovered device %s\n", dev_name(dev));
723 PREPARE_DELAYED_WORK(&old->work, fw_device_update);
724 schedule_delayed_work(&old->work, 0);
726 if (current_node == card->root_node)
727 fw_schedule_bm_work(card, 0);
732 spin_unlock_irq(&card->lock);
733 up_read(&fw_device_rwsem);
738 static void fw_device_init(struct work_struct *work)
740 struct fw_device *device =
741 container_of(work, struct fw_device, work.work);
742 struct device *revived_dev;
746 * All failure paths here set node->data to NULL, so that we
747 * don't try to do device_for_each_child() on a kfree()'d
751 if (read_bus_info_block(device, device->generation) < 0) {
752 if (device->config_rom_retries < MAX_RETRIES &&
753 atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
754 device->config_rom_retries++;
755 schedule_delayed_work(&device->work, RETRY_DELAY);
757 fw_notify("giving up on config rom for node id %x\n",
759 if (device->node == device->card->root_node)
760 fw_schedule_bm_work(device->card, 0);
761 fw_device_release(&device->device);
766 revived_dev = device_find_child(device->card->device,
767 device, lookup_existing_device);
769 put_device(revived_dev);
770 fw_device_release(&device->device);
775 device_initialize(&device->device);
777 fw_device_get(device);
778 down_write(&fw_device_rwsem);
779 err = idr_pre_get(&fw_device_idr, GFP_KERNEL) ?
780 idr_get_new(&fw_device_idr, device, &minor) :
782 up_write(&fw_device_rwsem);
787 device->device.bus = &fw_bus_type;
788 device->device.type = &fw_device_type;
789 device->device.parent = device->card->device;
790 device->device.devt = MKDEV(fw_cdev_major, minor);
791 dev_set_name(&device->device, "fw%d", minor);
793 init_fw_attribute_group(&device->device,
794 fw_device_attributes,
795 &device->attribute_group);
796 if (device_add(&device->device)) {
797 fw_error("Failed to add device.\n");
798 goto error_with_cdev;
801 create_units(device);
804 * Transition the device to running state. If it got pulled
805 * out from under us while we did the intialization work, we
806 * have to shut down the device again here. Normally, though,
807 * fw_node_event will be responsible for shutting it down when
808 * necessary. We have to use the atomic cmpxchg here to avoid
809 * racing with the FW_NODE_DESTROYED case in
812 if (atomic_cmpxchg(&device->state,
813 FW_DEVICE_INITIALIZING,
814 FW_DEVICE_RUNNING) == FW_DEVICE_GONE) {
815 PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
816 schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
818 if (device->config_rom_retries)
819 fw_notify("created device %s: GUID %08x%08x, S%d00, "
820 "%d config ROM retries\n",
821 dev_name(&device->device),
822 device->config_rom[3], device->config_rom[4],
823 1 << device->max_speed,
824 device->config_rom_retries);
826 fw_notify("created device %s: GUID %08x%08x, S%d00\n",
827 dev_name(&device->device),
828 device->config_rom[3], device->config_rom[4],
829 1 << device->max_speed);
830 device->config_rom_retries = 0;
834 * Reschedule the IRM work if we just finished reading the
835 * root node config rom. If this races with a bus reset we
836 * just end up running the IRM work a couple of extra times -
839 if (device->node == device->card->root_node)
840 fw_schedule_bm_work(device->card, 0);
845 down_write(&fw_device_rwsem);
846 idr_remove(&fw_device_idr, minor);
847 up_write(&fw_device_rwsem);
849 fw_device_put(device); /* fw_device_idr's reference */
851 put_device(&device->device); /* our reference */
854 static int update_unit(struct device *dev, void *data)
856 struct fw_unit *unit = fw_unit(dev);
857 struct fw_driver *driver = (struct fw_driver *)dev->driver;
859 if (is_fw_unit(dev) && driver != NULL && driver->update != NULL) {
861 driver->update(unit);
868 static void fw_device_update(struct work_struct *work)
870 struct fw_device *device =
871 container_of(work, struct fw_device, work.work);
873 fw_device_cdev_update(device);
874 device_for_each_child(&device->device, NULL, update_unit);
880 REREAD_BIB_UNCHANGED,
884 /* Reread and compare bus info block and header of root directory */
885 static int reread_bus_info_block(struct fw_device *device, int generation)
890 for (i = 0; i < 6; i++) {
891 if (read_rom(device, generation, i, &q) != RCODE_COMPLETE)
892 return REREAD_BIB_ERROR;
894 if (i == 0 && q == 0)
895 return REREAD_BIB_GONE;
897 if (i > device->config_rom_length || q != device->config_rom[i])
898 return REREAD_BIB_CHANGED;
901 return REREAD_BIB_UNCHANGED;
904 static void fw_device_refresh(struct work_struct *work)
906 struct fw_device *device =
907 container_of(work, struct fw_device, work.work);
908 struct fw_card *card = device->card;
909 int node_id = device->node_id;
911 switch (reread_bus_info_block(device, device->generation)) {
912 case REREAD_BIB_ERROR:
913 if (device->config_rom_retries < MAX_RETRIES / 2 &&
914 atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
915 device->config_rom_retries++;
916 schedule_delayed_work(&device->work, RETRY_DELAY / 2);
922 case REREAD_BIB_GONE:
925 case REREAD_BIB_UNCHANGED:
926 if (atomic_cmpxchg(&device->state,
927 FW_DEVICE_INITIALIZING,
928 FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
931 fw_device_update(work);
932 device->config_rom_retries = 0;
935 case REREAD_BIB_CHANGED:
940 * Something changed. We keep things simple and don't investigate
941 * further. We just destroy all previous units and create new ones.
943 device_for_each_child(&device->device, NULL, shutdown_unit);
945 if (read_bus_info_block(device, device->generation) < 0) {
946 if (device->config_rom_retries < MAX_RETRIES &&
947 atomic_read(&device->state) == FW_DEVICE_INITIALIZING) {
948 device->config_rom_retries++;
949 schedule_delayed_work(&device->work, RETRY_DELAY);
956 create_units(device);
958 if (atomic_cmpxchg(&device->state,
959 FW_DEVICE_INITIALIZING,
960 FW_DEVICE_RUNNING) == FW_DEVICE_GONE)
963 fw_notify("refreshed device %s\n", dev_name(&device->device));
964 device->config_rom_retries = 0;
968 fw_notify("giving up on refresh of device %s\n", dev_name(&device->device));
970 atomic_set(&device->state, FW_DEVICE_GONE);
971 PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
972 schedule_delayed_work(&device->work, SHUTDOWN_DELAY);
974 if (node_id == card->root_node->node_id)
975 fw_schedule_bm_work(card, 0);
978 void fw_node_event(struct fw_card *card, struct fw_node *node, int event)
980 struct fw_device *device;
983 case FW_NODE_CREATED:
984 case FW_NODE_LINK_ON:
988 device = kzalloc(sizeof(*device), GFP_ATOMIC);
993 * Do minimal intialization of the device here, the
994 * rest will happen in fw_device_init().
996 * Attention: A lot of things, even fw_device_get(),
997 * cannot be done before fw_device_init() finished!
998 * You can basically just check device->state and
999 * schedule work until then, but only while holding
1002 atomic_set(&device->state, FW_DEVICE_INITIALIZING);
1003 device->card = fw_card_get(card);
1004 device->node = fw_node_get(node);
1005 device->node_id = node->node_id;
1006 device->generation = card->generation;
1007 INIT_LIST_HEAD(&device->client_list);
1010 * Set the node data to point back to this device so
1011 * FW_NODE_UPDATED callbacks can update the node_id
1012 * and generation for the device.
1014 node->data = device;
1017 * Many devices are slow to respond after bus resets,
1018 * especially if they are bus powered and go through
1019 * power-up after getting plugged in. We schedule the
1020 * first config rom scan half a second after bus reset.
1022 INIT_DELAYED_WORK(&device->work, fw_device_init);
1023 schedule_delayed_work(&device->work, INITIAL_DELAY);
1026 case FW_NODE_INITIATED_RESET:
1027 device = node->data;
1031 device->node_id = node->node_id;
1032 smp_wmb(); /* update node_id before generation */
1033 device->generation = card->generation;
1034 if (atomic_cmpxchg(&device->state,
1036 FW_DEVICE_INITIALIZING) == FW_DEVICE_RUNNING) {
1037 PREPARE_DELAYED_WORK(&device->work, fw_device_refresh);
1038 schedule_delayed_work(&device->work,
1039 node == card->local_node ? 0 : INITIAL_DELAY);
1043 case FW_NODE_UPDATED:
1044 if (!node->link_on || node->data == NULL)
1047 device = node->data;
1048 device->node_id = node->node_id;
1049 smp_wmb(); /* update node_id before generation */
1050 device->generation = card->generation;
1051 if (atomic_read(&device->state) == FW_DEVICE_RUNNING) {
1052 PREPARE_DELAYED_WORK(&device->work, fw_device_update);
1053 schedule_delayed_work(&device->work, 0);
1057 case FW_NODE_DESTROYED:
1058 case FW_NODE_LINK_OFF:
1063 * Destroy the device associated with the node. There
1064 * are two cases here: either the device is fully
1065 * initialized (FW_DEVICE_RUNNING) or we're in the
1066 * process of reading its config rom
1067 * (FW_DEVICE_INITIALIZING). If it is fully
1068 * initialized we can reuse device->work to schedule a
1069 * full fw_device_shutdown(). If not, there's work
1070 * scheduled to read it's config rom, and we just put
1071 * the device in shutdown state to have that code fail
1072 * to create the device.
1074 device = node->data;
1075 if (atomic_xchg(&device->state,
1076 FW_DEVICE_GONE) == FW_DEVICE_RUNNING) {
1077 PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown);
1078 schedule_delayed_work(&device->work,
1079 list_empty(&card->link) ? 0 : SHUTDOWN_DELAY);