Merge branch 'topic/usb-audio' into for-linus
[linux-2.6] / drivers / mmc / host / au1xmmc.c
1 /*
2  * linux/drivers/mmc/host/au1xmmc.c - AU1XX0 MMC driver
3  *
4  *  Copyright (c) 2005, Advanced Micro Devices, Inc.
5  *
6  *  Developed with help from the 2.4.30 MMC AU1XXX controller including
7  *  the following copyright notices:
8  *     Copyright (c) 2003-2004 Embedded Edge, LLC.
9  *     Portions Copyright (C) 2002 Embedix, Inc
10  *     Copyright 2002 Hewlett-Packard Company
11
12  *  2.6 version of this driver inspired by:
13  *     (drivers/mmc/wbsd.c) Copyright (C) 2004-2005 Pierre Ossman,
14  *     All Rights Reserved.
15  *     (drivers/mmc/pxa.c) Copyright (C) 2003 Russell King,
16  *     All Rights Reserved.
17  *
18
19  * This program is free software; you can redistribute it and/or modify
20  * it under the terms of the GNU General Public License version 2 as
21  * published by the Free Software Foundation.
22  */
23
24 /* Why don't we use the SD controllers' carddetect feature?
25  *
26  * From the AU1100 MMC application guide:
27  * If the Au1100-based design is intended to support both MultiMediaCards
28  * and 1- or 4-data bit SecureDigital cards, then the solution is to
29  * connect a weak (560KOhm) pull-up resistor to connector pin 1.
30  * In doing so, a MMC card never enters SPI-mode communications,
31  * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
32  * (the low to high transition will not occur).
33  */
34
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/platform_device.h>
38 #include <linux/mm.h>
39 #include <linux/interrupt.h>
40 #include <linux/dma-mapping.h>
41 #include <linux/scatterlist.h>
42 #include <linux/leds.h>
43 #include <linux/mmc/host.h>
44
45 #include <asm/io.h>
46 #include <asm/mach-au1x00/au1000.h>
47 #include <asm/mach-au1x00/au1xxx_dbdma.h>
48 #include <asm/mach-au1x00/au1100_mmc.h>
49
50 #define DRIVER_NAME "au1xxx-mmc"
51
52 /* Set this to enable special debugging macros */
53 /* #define DEBUG */
54
55 #ifdef DEBUG
56 #define DBG(fmt, idx, args...)  \
57         printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args)
58 #else
59 #define DBG(fmt, idx, args...) do {} while (0)
60 #endif
61
62 /* Hardware definitions */
63 #define AU1XMMC_DESCRIPTOR_COUNT 1
64
65 /* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
66 #ifdef CONFIG_SOC_AU1100
67 #define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
68 #else   /* Au1200 */
69 #define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
70 #endif
71
72 #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
73                      MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
74                      MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
75
76 /* This gives us a hard value for the stop command that we can write directly
77  * to the command register.
78  */
79 #define STOP_CMD        \
80         (SD_CMD_RT_1B | SD_CMD_CT_7 | (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO)
81
82 /* This is the set of interrupts that we configure by default. */
83 #define AU1XMMC_INTERRUPTS                              \
84         (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_RAT |  \
85          SD_CONFIG_CR | SD_CONFIG_I)
86
87 /* The poll event (looking for insert/remove events runs twice a second. */
88 #define AU1XMMC_DETECT_TIMEOUT (HZ/2)
89
90 struct au1xmmc_host {
91         struct mmc_host *mmc;
92         struct mmc_request *mrq;
93
94         u32 flags;
95         u32 iobase;
96         u32 clock;
97         u32 bus_width;
98         u32 power_mode;
99
100         int status;
101
102         struct {
103                 int len;
104                 int dir;
105         } dma;
106
107         struct {
108                 int index;
109                 int offset;
110                 int len;
111         } pio;
112
113         u32 tx_chan;
114         u32 rx_chan;
115
116         int irq;
117
118         struct tasklet_struct finish_task;
119         struct tasklet_struct data_task;
120         struct au1xmmc_platform_data *platdata;
121         struct platform_device *pdev;
122         struct resource *ioarea;
123 };
124
125 /* Status flags used by the host structure */
126 #define HOST_F_XMIT     0x0001
127 #define HOST_F_RECV     0x0002
128 #define HOST_F_DMA      0x0010
129 #define HOST_F_ACTIVE   0x0100
130 #define HOST_F_STOP     0x1000
131
132 #define HOST_S_IDLE     0x0001
133 #define HOST_S_CMD      0x0002
134 #define HOST_S_DATA     0x0003
135 #define HOST_S_STOP     0x0004
136
137 /* Easy access macros */
138 #define HOST_STATUS(h)  ((h)->iobase + SD_STATUS)
139 #define HOST_CONFIG(h)  ((h)->iobase + SD_CONFIG)
140 #define HOST_ENABLE(h)  ((h)->iobase + SD_ENABLE)
141 #define HOST_TXPORT(h)  ((h)->iobase + SD_TXPORT)
142 #define HOST_RXPORT(h)  ((h)->iobase + SD_RXPORT)
143 #define HOST_CMDARG(h)  ((h)->iobase + SD_CMDARG)
144 #define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE)
145 #define HOST_CMD(h)     ((h)->iobase + SD_CMD)
146 #define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2)
147 #define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT)
148 #define HOST_DEBUG(h)   ((h)->iobase + SD_DEBUG)
149
150 #define DMA_CHANNEL(h)  \
151         (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
152
153 static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
154 {
155         u32 val = au_readl(HOST_CONFIG(host));
156         val |= mask;
157         au_writel(val, HOST_CONFIG(host));
158         au_sync();
159 }
160
161 static inline void FLUSH_FIFO(struct au1xmmc_host *host)
162 {
163         u32 val = au_readl(HOST_CONFIG2(host));
164
165         au_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
166         au_sync_delay(1);
167
168         /* SEND_STOP will turn off clock control - this re-enables it */
169         val &= ~SD_CONFIG2_DF;
170
171         au_writel(val, HOST_CONFIG2(host));
172         au_sync();
173 }
174
175 static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
176 {
177         u32 val = au_readl(HOST_CONFIG(host));
178         val &= ~mask;
179         au_writel(val, HOST_CONFIG(host));
180         au_sync();
181 }
182
183 static inline void SEND_STOP(struct au1xmmc_host *host)
184 {
185         u32 config2;
186
187         WARN_ON(host->status != HOST_S_DATA);
188         host->status = HOST_S_STOP;
189
190         config2 = au_readl(HOST_CONFIG2(host));
191         au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
192         au_sync();
193
194         /* Send the stop commmand */
195         au_writel(STOP_CMD, HOST_CMD(host));
196 }
197
198 static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
199 {
200         if (host->platdata && host->platdata->set_power)
201                 host->platdata->set_power(host->mmc, state);
202 }
203
204 static int au1xmmc_card_inserted(struct mmc_host *mmc)
205 {
206         struct au1xmmc_host *host = mmc_priv(mmc);
207
208         if (host->platdata && host->platdata->card_inserted)
209                 return !!host->platdata->card_inserted(host->mmc);
210
211         return -ENOSYS;
212 }
213
214 static int au1xmmc_card_readonly(struct mmc_host *mmc)
215 {
216         struct au1xmmc_host *host = mmc_priv(mmc);
217
218         if (host->platdata && host->platdata->card_readonly)
219                 return !!host->platdata->card_readonly(mmc);
220
221         return -ENOSYS;
222 }
223
224 static void au1xmmc_finish_request(struct au1xmmc_host *host)
225 {
226         struct mmc_request *mrq = host->mrq;
227
228         host->mrq = NULL;
229         host->flags &= HOST_F_ACTIVE | HOST_F_DMA;
230
231         host->dma.len = 0;
232         host->dma.dir = 0;
233
234         host->pio.index  = 0;
235         host->pio.offset = 0;
236         host->pio.len = 0;
237
238         host->status = HOST_S_IDLE;
239
240         mmc_request_done(host->mmc, mrq);
241 }
242
243 static void au1xmmc_tasklet_finish(unsigned long param)
244 {
245         struct au1xmmc_host *host = (struct au1xmmc_host *) param;
246         au1xmmc_finish_request(host);
247 }
248
249 static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
250                                 struct mmc_command *cmd, struct mmc_data *data)
251 {
252         u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
253
254         switch (mmc_resp_type(cmd)) {
255         case MMC_RSP_NONE:
256                 break;
257         case MMC_RSP_R1:
258                 mmccmd |= SD_CMD_RT_1;
259                 break;
260         case MMC_RSP_R1B:
261                 mmccmd |= SD_CMD_RT_1B;
262                 break;
263         case MMC_RSP_R2:
264                 mmccmd |= SD_CMD_RT_2;
265                 break;
266         case MMC_RSP_R3:
267                 mmccmd |= SD_CMD_RT_3;
268                 break;
269         default:
270                 printk(KERN_INFO "au1xmmc: unhandled response type %02x\n",
271                         mmc_resp_type(cmd));
272                 return -EINVAL;
273         }
274
275         if (data) {
276                 if (data->flags & MMC_DATA_READ) {
277                         if (data->blocks > 1)
278                                 mmccmd |= SD_CMD_CT_4;
279                         else
280                                 mmccmd |= SD_CMD_CT_2;
281                 } else if (data->flags & MMC_DATA_WRITE) {
282                         if (data->blocks > 1)
283                                 mmccmd |= SD_CMD_CT_3;
284                         else
285                                 mmccmd |= SD_CMD_CT_1;
286                 }
287         }
288
289         au_writel(cmd->arg, HOST_CMDARG(host));
290         au_sync();
291
292         if (wait)
293                 IRQ_OFF(host, SD_CONFIG_CR);
294
295         au_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
296         au_sync();
297
298         /* Wait for the command to go on the line */
299         while (au_readl(HOST_CMD(host)) & SD_CMD_GO)
300                 /* nop */;
301
302         /* Wait for the command to come back */
303         if (wait) {
304                 u32 status = au_readl(HOST_STATUS(host));
305
306                 while (!(status & SD_STATUS_CR))
307                         status = au_readl(HOST_STATUS(host));
308
309                 /* Clear the CR status */
310                 au_writel(SD_STATUS_CR, HOST_STATUS(host));
311
312                 IRQ_ON(host, SD_CONFIG_CR);
313         }
314
315         return 0;
316 }
317
318 static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
319 {
320         struct mmc_request *mrq = host->mrq;
321         struct mmc_data *data;
322         u32 crc;
323
324         WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP));
325
326         if (host->mrq == NULL)
327                 return;
328
329         data = mrq->cmd->data;
330
331         if (status == 0)
332                 status = au_readl(HOST_STATUS(host));
333
334         /* The transaction is really over when the SD_STATUS_DB bit is clear */
335         while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
336                 status = au_readl(HOST_STATUS(host));
337
338         data->error = 0;
339         dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
340
341         /* Process any errors */
342         crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
343         if (host->flags & HOST_F_XMIT)
344                 crc |= ((status & 0x07) == 0x02) ? 0 : 1;
345
346         if (crc)
347                 data->error = -EILSEQ;
348
349         /* Clear the CRC bits */
350         au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
351
352         data->bytes_xfered = 0;
353
354         if (!data->error) {
355                 if (host->flags & HOST_F_DMA) {
356 #ifdef CONFIG_SOC_AU1200        /* DBDMA */
357                         u32 chan = DMA_CHANNEL(host);
358
359                         chan_tab_t *c = *((chan_tab_t **)chan);
360                         au1x_dma_chan_t *cp = c->chan_ptr;
361                         data->bytes_xfered = cp->ddma_bytecnt;
362 #endif
363                 } else
364                         data->bytes_xfered =
365                                 (data->blocks * data->blksz) - host->pio.len;
366         }
367
368         au1xmmc_finish_request(host);
369 }
370
371 static void au1xmmc_tasklet_data(unsigned long param)
372 {
373         struct au1xmmc_host *host = (struct au1xmmc_host *)param;
374
375         u32 status = au_readl(HOST_STATUS(host));
376         au1xmmc_data_complete(host, status);
377 }
378
379 #define AU1XMMC_MAX_TRANSFER 8
380
381 static void au1xmmc_send_pio(struct au1xmmc_host *host)
382 {
383         struct mmc_data *data;
384         int sg_len, max, count;
385         unsigned char *sg_ptr, val;
386         u32 status;
387         struct scatterlist *sg;
388
389         data = host->mrq->data;
390
391         if (!(host->flags & HOST_F_XMIT))
392                 return;
393
394         /* This is the pointer to the data buffer */
395         sg = &data->sg[host->pio.index];
396         sg_ptr = sg_virt(sg) + host->pio.offset;
397
398         /* This is the space left inside the buffer */
399         sg_len = data->sg[host->pio.index].length - host->pio.offset;
400
401         /* Check if we need less than the size of the sg_buffer */
402         max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
403         if (max > AU1XMMC_MAX_TRANSFER)
404                 max = AU1XMMC_MAX_TRANSFER;
405
406         for (count = 0; count < max; count++) {
407                 status = au_readl(HOST_STATUS(host));
408
409                 if (!(status & SD_STATUS_TH))
410                         break;
411
412                 val = *sg_ptr++;
413
414                 au_writel((unsigned long)val, HOST_TXPORT(host));
415                 au_sync();
416         }
417
418         host->pio.len -= count;
419         host->pio.offset += count;
420
421         if (count == sg_len) {
422                 host->pio.index++;
423                 host->pio.offset = 0;
424         }
425
426         if (host->pio.len == 0) {
427                 IRQ_OFF(host, SD_CONFIG_TH);
428
429                 if (host->flags & HOST_F_STOP)
430                         SEND_STOP(host);
431
432                 tasklet_schedule(&host->data_task);
433         }
434 }
435
436 static void au1xmmc_receive_pio(struct au1xmmc_host *host)
437 {
438         struct mmc_data *data;
439         int max, count, sg_len = 0;
440         unsigned char *sg_ptr = NULL;
441         u32 status, val;
442         struct scatterlist *sg;
443
444         data = host->mrq->data;
445
446         if (!(host->flags & HOST_F_RECV))
447                 return;
448
449         max = host->pio.len;
450
451         if (host->pio.index < host->dma.len) {
452                 sg = &data->sg[host->pio.index];
453                 sg_ptr = sg_virt(sg) + host->pio.offset;
454
455                 /* This is the space left inside the buffer */
456                 sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
457
458                 /* Check if we need less than the size of the sg_buffer */
459                 if (sg_len < max)
460                         max = sg_len;
461         }
462
463         if (max > AU1XMMC_MAX_TRANSFER)
464                 max = AU1XMMC_MAX_TRANSFER;
465
466         for (count = 0; count < max; count++) {
467                 status = au_readl(HOST_STATUS(host));
468
469                 if (!(status & SD_STATUS_NE))
470                         break;
471
472                 if (status & SD_STATUS_RC) {
473                         DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
474                                         host->pio.len, count);
475                         break;
476                 }
477
478                 if (status & SD_STATUS_RO) {
479                         DBG("RX Overrun [%d + %d]\n", host->pdev->id,
480                                         host->pio.len, count);
481                         break;
482                 }
483                 else if (status & SD_STATUS_RU) {
484                         DBG("RX Underrun [%d + %d]\n", host->pdev->id,
485                                         host->pio.len,  count);
486                         break;
487                 }
488
489                 val = au_readl(HOST_RXPORT(host));
490
491                 if (sg_ptr)
492                         *sg_ptr++ = (unsigned char)(val & 0xFF);
493         }
494
495         host->pio.len -= count;
496         host->pio.offset += count;
497
498         if (sg_len && count == sg_len) {
499                 host->pio.index++;
500                 host->pio.offset = 0;
501         }
502
503         if (host->pio.len == 0) {
504                 /* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */
505                 IRQ_OFF(host, SD_CONFIG_NE);
506
507                 if (host->flags & HOST_F_STOP)
508                         SEND_STOP(host);
509
510                 tasklet_schedule(&host->data_task);
511         }
512 }
513
514 /* This is called when a command has been completed - grab the response
515  * and check for errors.  Then start the data transfer if it is indicated.
516  */
517 static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
518 {
519         struct mmc_request *mrq = host->mrq;
520         struct mmc_command *cmd;
521         u32 r[4];
522         int i, trans;
523
524         if (!host->mrq)
525                 return;
526
527         cmd = mrq->cmd;
528         cmd->error = 0;
529
530         if (cmd->flags & MMC_RSP_PRESENT) {
531                 if (cmd->flags & MMC_RSP_136) {
532                         r[0] = au_readl(host->iobase + SD_RESP3);
533                         r[1] = au_readl(host->iobase + SD_RESP2);
534                         r[2] = au_readl(host->iobase + SD_RESP1);
535                         r[3] = au_readl(host->iobase + SD_RESP0);
536
537                         /* The CRC is omitted from the response, so really
538                          * we only got 120 bytes, but the engine expects
539                          * 128 bits, so we have to shift things up.
540                          */
541                         for (i = 0; i < 4; i++) {
542                                 cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
543                                 if (i != 3)
544                                         cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
545                         }
546                 } else {
547                         /* Techincally, we should be getting all 48 bits of
548                          * the response (SD_RESP1 + SD_RESP2), but because
549                          * our response omits the CRC, our data ends up
550                          * being shifted 8 bits to the right.  In this case,
551                          * that means that the OSR data starts at bit 31,
552                          * so we can just read RESP0 and return that.
553                          */
554                         cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
555                 }
556         }
557
558         /* Figure out errors */
559         if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
560                 cmd->error = -EILSEQ;
561
562         trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
563
564         if (!trans || cmd->error) {
565                 IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF);
566                 tasklet_schedule(&host->finish_task);
567                 return;
568         }
569
570         host->status = HOST_S_DATA;
571
572         if (host->flags & HOST_F_DMA) {
573 #ifdef CONFIG_SOC_AU1200        /* DBDMA */
574                 u32 channel = DMA_CHANNEL(host);
575
576                 /* Start the DMA as soon as the buffer gets something in it */
577
578                 if (host->flags & HOST_F_RECV) {
579                         u32 mask = SD_STATUS_DB | SD_STATUS_NE;
580
581                         while((status & mask) != mask)
582                                 status = au_readl(HOST_STATUS(host));
583                 }
584
585                 au1xxx_dbdma_start(channel);
586 #endif
587         }
588 }
589
590 static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
591 {
592         unsigned int pbus = get_au1x00_speed();
593         unsigned int divisor;
594         u32 config;
595
596         /* From databook:
597          * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
598          */
599         pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
600         pbus /= 2;
601         divisor = ((pbus / rate) / 2) - 1;
602
603         config = au_readl(HOST_CONFIG(host));
604
605         config &= ~(SD_CONFIG_DIV);
606         config |= (divisor & SD_CONFIG_DIV) | SD_CONFIG_DE;
607
608         au_writel(config, HOST_CONFIG(host));
609         au_sync();
610 }
611
612 static int au1xmmc_prepare_data(struct au1xmmc_host *host,
613                                 struct mmc_data *data)
614 {
615         int datalen = data->blocks * data->blksz;
616
617         if (data->flags & MMC_DATA_READ)
618                 host->flags |= HOST_F_RECV;
619         else
620                 host->flags |= HOST_F_XMIT;
621
622         if (host->mrq->stop)
623                 host->flags |= HOST_F_STOP;
624
625         host->dma.dir = DMA_BIDIRECTIONAL;
626
627         host->dma.len = dma_map_sg(mmc_dev(host->mmc), data->sg,
628                                    data->sg_len, host->dma.dir);
629
630         if (host->dma.len == 0)
631                 return -ETIMEDOUT;
632
633         au_writel(data->blksz - 1, HOST_BLKSIZE(host));
634
635         if (host->flags & HOST_F_DMA) {
636 #ifdef CONFIG_SOC_AU1200        /* DBDMA */
637                 int i;
638                 u32 channel = DMA_CHANNEL(host);
639
640                 au1xxx_dbdma_stop(channel);
641
642                 for (i = 0; i < host->dma.len; i++) {
643                         u32 ret = 0, flags = DDMA_FLAGS_NOIE;
644                         struct scatterlist *sg = &data->sg[i];
645                         int sg_len = sg->length;
646
647                         int len = (datalen > sg_len) ? sg_len : datalen;
648
649                         if (i == host->dma.len - 1)
650                                 flags = DDMA_FLAGS_IE;
651
652                         if (host->flags & HOST_F_XMIT) {
653                                 ret = au1xxx_dbdma_put_source_flags(channel,
654                                         (void *)sg_virt(sg), len, flags);
655                         } else {
656                                 ret = au1xxx_dbdma_put_dest_flags(channel,
657                                         (void *)sg_virt(sg), len, flags);
658                         }
659
660                         if (!ret)
661                                 goto dataerr;
662
663                         datalen -= len;
664                 }
665 #endif
666         } else {
667                 host->pio.index = 0;
668                 host->pio.offset = 0;
669                 host->pio.len = datalen;
670
671                 if (host->flags & HOST_F_XMIT)
672                         IRQ_ON(host, SD_CONFIG_TH);
673                 else
674                         IRQ_ON(host, SD_CONFIG_NE);
675                         /* IRQ_ON(host, SD_CONFIG_RA | SD_CONFIG_RF); */
676         }
677
678         return 0;
679
680 dataerr:
681         dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
682                         host->dma.dir);
683         return -ETIMEDOUT;
684 }
685
686 /* This actually starts a command or data transaction */
687 static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
688 {
689         struct au1xmmc_host *host = mmc_priv(mmc);
690         int ret = 0;
691
692         WARN_ON(irqs_disabled());
693         WARN_ON(host->status != HOST_S_IDLE);
694
695         host->mrq = mrq;
696         host->status = HOST_S_CMD;
697
698         /* fail request immediately if no card is present */
699         if (0 == au1xmmc_card_inserted(mmc)) {
700                 mrq->cmd->error = -ENOMEDIUM;
701                 au1xmmc_finish_request(host);
702                 return;
703         }
704
705         if (mrq->data) {
706                 FLUSH_FIFO(host);
707                 ret = au1xmmc_prepare_data(host, mrq->data);
708         }
709
710         if (!ret)
711                 ret = au1xmmc_send_command(host, 0, mrq->cmd, mrq->data);
712
713         if (ret) {
714                 mrq->cmd->error = ret;
715                 au1xmmc_finish_request(host);
716         }
717 }
718
719 static void au1xmmc_reset_controller(struct au1xmmc_host *host)
720 {
721         /* Apply the clock */
722         au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
723         au_sync_delay(1);
724
725         au_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
726         au_sync_delay(5);
727
728         au_writel(~0, HOST_STATUS(host));
729         au_sync();
730
731         au_writel(0, HOST_BLKSIZE(host));
732         au_writel(0x001fffff, HOST_TIMEOUT(host));
733         au_sync();
734
735         au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
736         au_sync();
737
738         au_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
739         au_sync_delay(1);
740
741         au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
742         au_sync();
743
744         /* Configure interrupts */
745         au_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
746         au_sync();
747 }
748
749
750 static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
751 {
752         struct au1xmmc_host *host = mmc_priv(mmc);
753         u32 config2;
754
755         if (ios->power_mode == MMC_POWER_OFF)
756                 au1xmmc_set_power(host, 0);
757         else if (ios->power_mode == MMC_POWER_ON) {
758                 au1xmmc_set_power(host, 1);
759         }
760
761         if (ios->clock && ios->clock != host->clock) {
762                 au1xmmc_set_clock(host, ios->clock);
763                 host->clock = ios->clock;
764         }
765
766         config2 = au_readl(HOST_CONFIG2(host));
767         switch (ios->bus_width) {
768         case MMC_BUS_WIDTH_4:
769                 config2 |= SD_CONFIG2_WB;
770                 break;
771         case MMC_BUS_WIDTH_1:
772                 config2 &= ~SD_CONFIG2_WB;
773                 break;
774         }
775         au_writel(config2, HOST_CONFIG2(host));
776         au_sync();
777 }
778
779 #define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
780 #define STATUS_DATA_IN  (SD_STATUS_NE)
781 #define STATUS_DATA_OUT (SD_STATUS_TH)
782
783 static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
784 {
785         struct au1xmmc_host *host = dev_id;
786         u32 status;
787
788         status = au_readl(HOST_STATUS(host));
789
790         if (!(status & SD_STATUS_I))
791                 return IRQ_NONE;        /* not ours */
792
793         if (status & SD_STATUS_SI)      /* SDIO */
794                 mmc_signal_sdio_irq(host->mmc);
795
796         if (host->mrq && (status & STATUS_TIMEOUT)) {
797                 if (status & SD_STATUS_RAT)
798                         host->mrq->cmd->error = -ETIMEDOUT;
799                 else if (status & SD_STATUS_DT)
800                         host->mrq->data->error = -ETIMEDOUT;
801
802                 /* In PIO mode, interrupts might still be enabled */
803                 IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
804
805                 /* IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); */
806                 tasklet_schedule(&host->finish_task);
807         }
808 #if 0
809         else if (status & SD_STATUS_DD) {
810                 /* Sometimes we get a DD before a NE in PIO mode */
811                 if (!(host->flags & HOST_F_DMA) && (status & SD_STATUS_NE))
812                         au1xmmc_receive_pio(host);
813                 else {
814                         au1xmmc_data_complete(host, status);
815                         /* tasklet_schedule(&host->data_task); */
816                 }
817         }
818 #endif
819         else if (status & SD_STATUS_CR) {
820                 if (host->status == HOST_S_CMD)
821                         au1xmmc_cmd_complete(host, status);
822
823         } else if (!(host->flags & HOST_F_DMA)) {
824                 if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT))
825                         au1xmmc_send_pio(host);
826                 else if ((host->flags & HOST_F_RECV) && (status & STATUS_DATA_IN))
827                         au1xmmc_receive_pio(host);
828
829         } else if (status & 0x203F3C70) {
830                         DBG("Unhandled status %8.8x\n", host->pdev->id,
831                                 status);
832         }
833
834         au_writel(status, HOST_STATUS(host));
835         au_sync();
836
837         return IRQ_HANDLED;
838 }
839
840 #ifdef CONFIG_SOC_AU1200
841 /* 8bit memory DMA device */
842 static dbdev_tab_t au1xmmc_mem_dbdev = {
843         .dev_id         = DSCR_CMD0_ALWAYS,
844         .dev_flags      = DEV_FLAGS_ANYUSE,
845         .dev_tsize      = 0,
846         .dev_devwidth   = 8,
847         .dev_physaddr   = 0x00000000,
848         .dev_intlevel   = 0,
849         .dev_intpolarity = 0,
850 };
851 static int memid;
852
853 static void au1xmmc_dbdma_callback(int irq, void *dev_id)
854 {
855         struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id;
856
857         /* Avoid spurious interrupts */
858         if (!host->mrq)
859                 return;
860
861         if (host->flags & HOST_F_STOP)
862                 SEND_STOP(host);
863
864         tasklet_schedule(&host->data_task);
865 }
866
867 static int au1xmmc_dbdma_init(struct au1xmmc_host *host)
868 {
869         struct resource *res;
870         int txid, rxid;
871
872         res = platform_get_resource(host->pdev, IORESOURCE_DMA, 0);
873         if (!res)
874                 return -ENODEV;
875         txid = res->start;
876
877         res = platform_get_resource(host->pdev, IORESOURCE_DMA, 1);
878         if (!res)
879                 return -ENODEV;
880         rxid = res->start;
881
882         if (!memid)
883                 return -ENODEV;
884
885         host->tx_chan = au1xxx_dbdma_chan_alloc(memid, txid,
886                                 au1xmmc_dbdma_callback, (void *)host);
887         if (!host->tx_chan) {
888                 dev_err(&host->pdev->dev, "cannot allocate TX DMA\n");
889                 return -ENODEV;
890         }
891
892         host->rx_chan = au1xxx_dbdma_chan_alloc(rxid, memid,
893                                 au1xmmc_dbdma_callback, (void *)host);
894         if (!host->rx_chan) {
895                 dev_err(&host->pdev->dev, "cannot allocate RX DMA\n");
896                 au1xxx_dbdma_chan_free(host->tx_chan);
897                 return -ENODEV;
898         }
899
900         au1xxx_dbdma_set_devwidth(host->tx_chan, 8);
901         au1xxx_dbdma_set_devwidth(host->rx_chan, 8);
902
903         au1xxx_dbdma_ring_alloc(host->tx_chan, AU1XMMC_DESCRIPTOR_COUNT);
904         au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
905
906         /* DBDMA is good to go */
907         host->flags |= HOST_F_DMA;
908
909         return 0;
910 }
911
912 static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host)
913 {
914         if (host->flags & HOST_F_DMA) {
915                 host->flags &= ~HOST_F_DMA;
916                 au1xxx_dbdma_chan_free(host->tx_chan);
917                 au1xxx_dbdma_chan_free(host->rx_chan);
918         }
919 }
920 #endif
921
922 static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
923 {
924         struct au1xmmc_host *host = mmc_priv(mmc);
925
926         if (en)
927                 IRQ_ON(host, SD_CONFIG_SI);
928         else
929                 IRQ_OFF(host, SD_CONFIG_SI);
930 }
931
932 static const struct mmc_host_ops au1xmmc_ops = {
933         .request        = au1xmmc_request,
934         .set_ios        = au1xmmc_set_ios,
935         .get_ro         = au1xmmc_card_readonly,
936         .get_cd         = au1xmmc_card_inserted,
937         .enable_sdio_irq = au1xmmc_enable_sdio_irq,
938 };
939
940 static int __devinit au1xmmc_probe(struct platform_device *pdev)
941 {
942         struct mmc_host *mmc;
943         struct au1xmmc_host *host;
944         struct resource *r;
945         int ret;
946
947         mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
948         if (!mmc) {
949                 dev_err(&pdev->dev, "no memory for mmc_host\n");
950                 ret = -ENOMEM;
951                 goto out0;
952         }
953
954         host = mmc_priv(mmc);
955         host->mmc = mmc;
956         host->platdata = pdev->dev.platform_data;
957         host->pdev = pdev;
958
959         ret = -ENODEV;
960         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
961         if (!r) {
962                 dev_err(&pdev->dev, "no mmio defined\n");
963                 goto out1;
964         }
965
966         host->ioarea = request_mem_region(r->start, r->end - r->start + 1,
967                                            pdev->name);
968         if (!host->ioarea) {
969                 dev_err(&pdev->dev, "mmio already in use\n");
970                 goto out1;
971         }
972
973         host->iobase = (unsigned long)ioremap(r->start, 0x3c);
974         if (!host->iobase) {
975                 dev_err(&pdev->dev, "cannot remap mmio\n");
976                 goto out2;
977         }
978
979         r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
980         if (!r) {
981                 dev_err(&pdev->dev, "no IRQ defined\n");
982                 goto out3;
983         }
984
985         host->irq = r->start;
986         /* IRQ is shared among both SD controllers */
987         ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED,
988                           DRIVER_NAME, host);
989         if (ret) {
990                 dev_err(&pdev->dev, "cannot grab IRQ\n");
991                 goto out3;
992         }
993
994         mmc->ops = &au1xmmc_ops;
995
996         mmc->f_min =   450000;
997         mmc->f_max = 24000000;
998
999         mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
1000         mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
1001
1002         mmc->max_blk_size = 2048;
1003         mmc->max_blk_count = 512;
1004
1005         mmc->ocr_avail = AU1XMMC_OCR;
1006         mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1007
1008         host->status = HOST_S_IDLE;
1009
1010         /* board-specific carddetect setup, if any */
1011         if (host->platdata && host->platdata->cd_setup) {
1012                 ret = host->platdata->cd_setup(mmc, 1);
1013                 if (ret) {
1014                         dev_warn(&pdev->dev, "board CD setup failed\n");
1015                         mmc->caps |= MMC_CAP_NEEDS_POLL;
1016                 }
1017         } else
1018                 mmc->caps |= MMC_CAP_NEEDS_POLL;
1019
1020         tasklet_init(&host->data_task, au1xmmc_tasklet_data,
1021                         (unsigned long)host);
1022
1023         tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
1024                         (unsigned long)host);
1025
1026 #ifdef CONFIG_SOC_AU1200
1027         ret = au1xmmc_dbdma_init(host);
1028         if (ret)
1029                 printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n");
1030 #endif
1031
1032 #ifdef CONFIG_LEDS_CLASS
1033         if (host->platdata && host->platdata->led) {
1034                 struct led_classdev *led = host->platdata->led;
1035                 led->name = mmc_hostname(mmc);
1036                 led->brightness = LED_OFF;
1037                 led->default_trigger = mmc_hostname(mmc);
1038                 ret = led_classdev_register(mmc_dev(mmc), led);
1039                 if (ret)
1040                         goto out5;
1041         }
1042 #endif
1043
1044         au1xmmc_reset_controller(host);
1045
1046         ret = mmc_add_host(mmc);
1047         if (ret) {
1048                 dev_err(&pdev->dev, "cannot add mmc host\n");
1049                 goto out6;
1050         }
1051
1052         platform_set_drvdata(pdev, host);
1053
1054         printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X"
1055                 " (mode=%s)\n", pdev->id, host->iobase,
1056                 host->flags & HOST_F_DMA ? "dma" : "pio");
1057
1058         return 0;       /* all ok */
1059
1060 out6:
1061 #ifdef CONFIG_LEDS_CLASS
1062         if (host->platdata && host->platdata->led)
1063                 led_classdev_unregister(host->platdata->led);
1064 out5:
1065 #endif
1066         au_writel(0, HOST_ENABLE(host));
1067         au_writel(0, HOST_CONFIG(host));
1068         au_writel(0, HOST_CONFIG2(host));
1069         au_sync();
1070
1071 #ifdef CONFIG_SOC_AU1200
1072         au1xmmc_dbdma_shutdown(host);
1073 #endif
1074
1075         tasklet_kill(&host->data_task);
1076         tasklet_kill(&host->finish_task);
1077
1078         if (host->platdata && host->platdata->cd_setup &&
1079             !(mmc->caps & MMC_CAP_NEEDS_POLL))
1080                 host->platdata->cd_setup(mmc, 0);
1081
1082         free_irq(host->irq, host);
1083 out3:
1084         iounmap((void *)host->iobase);
1085 out2:
1086         release_resource(host->ioarea);
1087         kfree(host->ioarea);
1088 out1:
1089         mmc_free_host(mmc);
1090 out0:
1091         return ret;
1092 }
1093
1094 static int __devexit au1xmmc_remove(struct platform_device *pdev)
1095 {
1096         struct au1xmmc_host *host = platform_get_drvdata(pdev);
1097
1098         if (host) {
1099                 mmc_remove_host(host->mmc);
1100
1101 #ifdef CONFIG_LEDS_CLASS
1102                 if (host->platdata && host->platdata->led)
1103                         led_classdev_unregister(host->platdata->led);
1104 #endif
1105
1106                 if (host->platdata && host->platdata->cd_setup &&
1107                     !(host->mmc->caps & MMC_CAP_NEEDS_POLL))
1108                         host->platdata->cd_setup(host->mmc, 0);
1109
1110                 au_writel(0, HOST_ENABLE(host));
1111                 au_writel(0, HOST_CONFIG(host));
1112                 au_writel(0, HOST_CONFIG2(host));
1113                 au_sync();
1114
1115                 tasklet_kill(&host->data_task);
1116                 tasklet_kill(&host->finish_task);
1117
1118 #ifdef CONFIG_SOC_AU1200
1119                 au1xmmc_dbdma_shutdown(host);
1120 #endif
1121                 au1xmmc_set_power(host, 0);
1122
1123                 free_irq(host->irq, host);
1124                 iounmap((void *)host->iobase);
1125                 release_resource(host->ioarea);
1126                 kfree(host->ioarea);
1127
1128                 mmc_free_host(host->mmc);
1129                 platform_set_drvdata(pdev, NULL);
1130         }
1131         return 0;
1132 }
1133
1134 #ifdef CONFIG_PM
1135 static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state)
1136 {
1137         struct au1xmmc_host *host = platform_get_drvdata(pdev);
1138         int ret;
1139
1140         ret = mmc_suspend_host(host->mmc, state);
1141         if (ret)
1142                 return ret;
1143
1144         au_writel(0, HOST_CONFIG2(host));
1145         au_writel(0, HOST_CONFIG(host));
1146         au_writel(0xffffffff, HOST_STATUS(host));
1147         au_writel(0, HOST_ENABLE(host));
1148         au_sync();
1149
1150         return 0;
1151 }
1152
1153 static int au1xmmc_resume(struct platform_device *pdev)
1154 {
1155         struct au1xmmc_host *host = platform_get_drvdata(pdev);
1156
1157         au1xmmc_reset_controller(host);
1158
1159         return mmc_resume_host(host->mmc);
1160 }
1161 #else
1162 #define au1xmmc_suspend NULL
1163 #define au1xmmc_resume NULL
1164 #endif
1165
1166 static struct platform_driver au1xmmc_driver = {
1167         .probe         = au1xmmc_probe,
1168         .remove        = au1xmmc_remove,
1169         .suspend       = au1xmmc_suspend,
1170         .resume        = au1xmmc_resume,
1171         .driver        = {
1172                 .name  = DRIVER_NAME,
1173                 .owner = THIS_MODULE,
1174         },
1175 };
1176
1177 static int __init au1xmmc_init(void)
1178 {
1179 #ifdef CONFIG_SOC_AU1200
1180         /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
1181          * of 8 bits.  And since devices are shared, we need to create
1182          * our own to avoid freaking out other devices.
1183          */
1184         memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
1185         if (!memid)
1186                 printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n");
1187 #endif
1188         return platform_driver_register(&au1xmmc_driver);
1189 }
1190
1191 static void __exit au1xmmc_exit(void)
1192 {
1193 #ifdef CONFIG_SOC_AU1200
1194         if (memid)
1195                 au1xxx_ddma_del_device(memid);
1196 #endif
1197         platform_driver_unregister(&au1xmmc_driver);
1198 }
1199
1200 module_init(au1xmmc_init);
1201 module_exit(au1xmmc_exit);
1202
1203 MODULE_AUTHOR("Advanced Micro Devices, Inc");
1204 MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
1205 MODULE_LICENSE("GPL");
1206 MODULE_ALIAS("platform:au1xxx-mmc");