1 #include <linux/kernel.h>
2 #include <linux/errno.h>
3 #include <linux/init.h>
4 #include <linux/slab.h>
6 #include <linux/module.h>
7 #include <linux/moduleparam.h>
8 #include <linux/scatterlist.h>
10 #include <linux/usb.h>
13 /*-------------------------------------------------------------------------*/
15 // FIXME make these public somewhere; usbdevfs.h?
17 struct usbtest_param {
19 unsigned test_num; /* 0..(TEST_CASES-1) */
26 struct timeval duration;
28 #define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param)
30 /*-------------------------------------------------------------------------*/
32 #define GENERIC /* let probe() bind using module params */
34 /* Some devices that can be used for testing will have "real" drivers.
35 * Entries for those need to be enabled here by hand, after disabling
38 //#define IBOT2 /* grab iBOT2 webcams */
39 //#define KEYSPAN_19Qi /* grab un-renumerated serial adapter */
41 /*-------------------------------------------------------------------------*/
45 u8 ep_in; /* bulk/intr source */
46 u8 ep_out; /* bulk/intr sink */
47 unsigned autoconf : 1;
48 unsigned ctrl_out : 1;
49 unsigned iso : 1; /* try iso in/out */
53 /* this is accessed only through usbfs ioctl calls.
54 * one ioctl to issue a test ... one lock per device.
55 * tests create other threads if they need them.
56 * urbs and buffers are allocated dynamically,
57 * and data generated deterministically.
60 struct usb_interface *intf;
61 struct usbtest_info *info;
66 struct usb_endpoint_descriptor *iso_in, *iso_out;
73 static struct usb_device *testdev_to_usbdev (struct usbtest_dev *test)
75 return interface_to_usbdev (test->intf);
78 /* set up all urbs so they can be used with either bulk or interrupt */
79 #define INTERRUPT_RATE 1 /* msec/transfer */
81 #define xprintk(tdev,level,fmt,args...) \
82 dev_printk(level , &(tdev)->intf->dev , fmt , ## args)
85 #define DBG(dev,fmt,args...) \
86 xprintk(dev , KERN_DEBUG , fmt , ## args)
88 #define DBG(dev,fmt,args...) \
95 #define VDBG(dev,fmt,args...) \
99 #define ERROR(dev,fmt,args...) \
100 xprintk(dev , KERN_ERR , fmt , ## args)
101 #define WARN(dev,fmt,args...) \
102 xprintk(dev , KERN_WARNING , fmt , ## args)
103 #define INFO(dev,fmt,args...) \
104 xprintk(dev , KERN_INFO , fmt , ## args)
106 /*-------------------------------------------------------------------------*/
109 get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf)
112 struct usb_host_interface *alt;
113 struct usb_host_endpoint *in, *out;
114 struct usb_host_endpoint *iso_in, *iso_out;
115 struct usb_device *udev;
117 for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
121 iso_in = iso_out = NULL;
122 alt = intf->altsetting + tmp;
124 /* take the first altsetting with in-bulk + out-bulk;
125 * ignore other endpoints and altsetttings.
127 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
128 struct usb_host_endpoint *e;
130 e = alt->endpoint + ep;
131 switch (e->desc.bmAttributes) {
132 case USB_ENDPOINT_XFER_BULK:
134 case USB_ENDPOINT_XFER_ISOC:
141 if (e->desc.bEndpointAddress & USB_DIR_IN) {
150 if (e->desc.bEndpointAddress & USB_DIR_IN) {
158 if ((in && out) || (iso_in && iso_out))
164 udev = testdev_to_usbdev (dev);
165 if (alt->desc.bAlternateSetting != 0) {
166 tmp = usb_set_interface (udev,
167 alt->desc.bInterfaceNumber,
168 alt->desc.bAlternateSetting);
174 dev->in_pipe = usb_rcvbulkpipe (udev,
175 in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
176 dev->out_pipe = usb_sndbulkpipe (udev,
177 out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
180 dev->iso_in = &iso_in->desc;
181 dev->in_iso_pipe = usb_rcvisocpipe (udev,
182 iso_in->desc.bEndpointAddress
183 & USB_ENDPOINT_NUMBER_MASK);
184 dev->iso_out = &iso_out->desc;
185 dev->out_iso_pipe = usb_sndisocpipe (udev,
186 iso_out->desc.bEndpointAddress
187 & USB_ENDPOINT_NUMBER_MASK);
192 /*-------------------------------------------------------------------------*/
194 /* Support for testing basic non-queued I/O streams.
196 * These just package urbs as requests that can be easily canceled.
197 * Each urb's data buffer is dynamically allocated; callers can fill
198 * them with non-zero test data (or test for it) when appropriate.
201 static void simple_callback (struct urb *urb, struct pt_regs *regs)
203 complete ((struct completion *) urb->context);
206 static struct urb *simple_alloc_urb (
207 struct usb_device *udev,
216 urb = usb_alloc_urb (0, SLAB_KERNEL);
219 usb_fill_bulk_urb (urb, udev, pipe, NULL, bytes, simple_callback, NULL);
220 urb->interval = (udev->speed == USB_SPEED_HIGH)
221 ? (INTERRUPT_RATE << 3)
223 urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
224 if (usb_pipein (pipe))
225 urb->transfer_flags |= URB_SHORT_NOT_OK;
226 urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
228 if (!urb->transfer_buffer) {
232 memset (urb->transfer_buffer, 0, bytes);
236 static unsigned pattern = 0;
237 module_param (pattern, uint, S_IRUGO);
238 // MODULE_PARM_DESC (pattern, "i/o pattern (0 == zeroes)");
240 static inline void simple_fill_buf (struct urb *urb)
243 u8 *buf = urb->transfer_buffer;
244 unsigned len = urb->transfer_buffer_length;
250 memset (buf, 0, len);
253 for (i = 0; i < len; i++)
254 *buf++ = (u8) (i % 63);
259 static inline int simple_check_buf (struct urb *urb)
263 u8 *buf = urb->transfer_buffer;
264 unsigned len = urb->actual_length;
266 for (i = 0; i < len; i++, buf++) {
268 /* all-zeroes has no synchronization issues */
272 /* mod63 stays in sync with short-terminated transfers,
273 * or otherwise when host and gadget agree on how large
274 * each usb transfer request should be. resync is done
275 * with set_interface or set_config.
280 /* always fail unsupported patterns */
285 if (*buf == expected)
287 dbg ("buf[%d] = %d (not %d)", i, *buf, expected);
293 static void simple_free_urb (struct urb *urb)
295 usb_buffer_free (urb->dev, urb->transfer_buffer_length,
296 urb->transfer_buffer, urb->transfer_dma);
300 static int simple_io (
308 struct usb_device *udev = urb->dev;
309 int max = urb->transfer_buffer_length;
310 struct completion completion;
313 urb->context = &completion;
314 while (retval == 0 && iterations-- > 0) {
315 init_completion (&completion);
316 if (usb_pipeout (urb->pipe))
317 simple_fill_buf (urb);
318 if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0)
321 /* NOTE: no timeouts; can't be broken out of by interrupt */
322 wait_for_completion (&completion);
323 retval = urb->status;
325 if (retval == 0 && usb_pipein (urb->pipe))
326 retval = simple_check_buf (urb);
329 int len = urb->transfer_buffer_length;
334 len = (vary < max) ? vary : max;
335 urb->transfer_buffer_length = len;
338 /* FIXME if endpoint halted, clear halt (and log) */
340 urb->transfer_buffer_length = max;
342 if (expected != retval)
344 "%s failed, iterations left %d, status %d (not %d)\n",
345 label, iterations, retval, expected);
350 /*-------------------------------------------------------------------------*/
352 /* We use scatterlist primitives to test queued I/O.
353 * Yes, this also tests the scatterlist primitives.
356 static void free_sglist (struct scatterlist *sg, int nents)
362 for (i = 0; i < nents; i++) {
365 kfree (page_address (sg [i].page) + sg [i].offset);
370 static struct scatterlist *
371 alloc_sglist (int nents, int max, int vary)
373 struct scatterlist *sg;
377 sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL);
381 for (i = 0; i < nents; i++) {
385 buf = kzalloc (size, SLAB_KERNEL);
391 /* kmalloc pages are always physically contiguous! */
392 sg_init_one(&sg[i], buf, size);
399 for (j = 0; j < size; j++)
400 *buf++ = (u8) (j % 63);
408 size = (vary < max) ? vary : max;
415 static int perform_sglist (
416 struct usb_device *udev,
419 struct usb_sg_request *req,
420 struct scatterlist *sg,
426 while (retval == 0 && iterations-- > 0) {
427 retval = usb_sg_init (req, udev, pipe,
428 (udev->speed == USB_SPEED_HIGH)
429 ? (INTERRUPT_RATE << 3)
431 sg, nents, 0, SLAB_KERNEL);
436 retval = req->status;
438 /* FIXME check resulting data pattern */
440 /* FIXME if endpoint halted, clear halt (and log) */
443 // FIXME for unlink or fault handling tests, don't report
444 // failure if retval is as we expected ...
447 dbg ("perform_sglist failed, iterations left %d, status %d",
453 /*-------------------------------------------------------------------------*/
455 /* unqueued control message testing
457 * there's a nice set of device functional requirements in chapter 9 of the
458 * usb 2.0 spec, which we can apply to ANY device, even ones that don't use
459 * special test firmware.
461 * we know the device is configured (or suspended) by the time it's visible
462 * through usbfs. we can't change that, so we won't test enumeration (which
463 * worked 'well enough' to get here, this time), power management (ditto),
464 * or remote wakeup (which needs human interaction).
467 static unsigned realworld = 1;
468 module_param (realworld, uint, 0);
469 MODULE_PARM_DESC (realworld, "clear to demand stricter spec compliance");
471 static int get_altsetting (struct usbtest_dev *dev)
473 struct usb_interface *iface = dev->intf;
474 struct usb_device *udev = interface_to_usbdev (iface);
477 retval = usb_control_msg (udev, usb_rcvctrlpipe (udev, 0),
478 USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE,
479 0, iface->altsetting [0].desc.bInterfaceNumber,
480 dev->buf, 1, USB_CTRL_GET_TIMEOUT);
492 static int set_altsetting (struct usbtest_dev *dev, int alternate)
494 struct usb_interface *iface = dev->intf;
495 struct usb_device *udev;
497 if (alternate < 0 || alternate >= 256)
500 udev = interface_to_usbdev (iface);
501 return usb_set_interface (udev,
502 iface->altsetting [0].desc.bInterfaceNumber,
506 static int is_good_config (char *buf, int len)
508 struct usb_config_descriptor *config;
510 if (len < sizeof *config)
512 config = (struct usb_config_descriptor *) buf;
514 switch (config->bDescriptorType) {
516 case USB_DT_OTHER_SPEED_CONFIG:
517 if (config->bLength != 9) {
518 dbg ("bogus config descriptor length");
521 /* this bit 'must be 1' but often isn't */
522 if (!realworld && !(config->bmAttributes & 0x80)) {
523 dbg ("high bit of config attributes not set");
526 if (config->bmAttributes & 0x1f) { /* reserved == 0 */
527 dbg ("reserved config bits set");
535 if (le16_to_cpu(config->wTotalLength) == len) /* read it all */
537 if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE) /* max partial read */
539 dbg ("bogus config descriptor read size");
543 /* sanity test for standard requests working with usb_control_mesg() and some
544 * of the utility functions which use it.
546 * this doesn't test how endpoint halts behave or data toggles get set, since
547 * we won't do I/O to bulk/interrupt endpoints here (which is how to change
548 * halt or toggle). toggle testing is impractical without support from hcds.
550 * this avoids failing devices linux would normally work with, by not testing
551 * config/altsetting operations for devices that only support their defaults.
552 * such devices rarely support those needless operations.
554 * NOTE that since this is a sanity test, it's not examining boundary cases
555 * to see if usbcore, hcd, and device all behave right. such testing would
556 * involve varied read sizes and other operation sequences.
558 static int ch9_postconfig (struct usbtest_dev *dev)
560 struct usb_interface *iface = dev->intf;
561 struct usb_device *udev = interface_to_usbdev (iface);
564 /* [9.2.3] if there's more than one altsetting, we need to be able to
565 * set and get each one. mostly trusts the descriptors from usbcore.
567 for (i = 0; i < iface->num_altsetting; i++) {
569 /* 9.2.3 constrains the range here */
570 alt = iface->altsetting [i].desc.bAlternateSetting;
571 if (alt < 0 || alt >= iface->num_altsetting) {
572 dev_dbg (&iface->dev,
573 "invalid alt [%d].bAltSetting = %d\n",
577 /* [real world] get/set unimplemented if there's only one */
578 if (realworld && iface->num_altsetting == 1)
581 /* [9.4.10] set_interface */
582 retval = set_altsetting (dev, alt);
584 dev_dbg (&iface->dev, "can't set_interface = %d, %d\n",
589 /* [9.4.4] get_interface always works */
590 retval = get_altsetting (dev);
592 dev_dbg (&iface->dev, "get alt should be %d, was %d\n",
594 return (retval < 0) ? retval : -EDOM;
599 /* [real world] get_config unimplemented if there's only one */
600 if (!realworld || udev->descriptor.bNumConfigurations != 1) {
601 int expected = udev->actconfig->desc.bConfigurationValue;
603 /* [9.4.2] get_configuration always works
604 * ... although some cheap devices (like one TI Hub I've got)
605 * won't return config descriptors except before set_config.
607 retval = usb_control_msg (udev, usb_rcvctrlpipe (udev, 0),
608 USB_REQ_GET_CONFIGURATION,
609 USB_DIR_IN | USB_RECIP_DEVICE,
610 0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT);
611 if (retval != 1 || dev->buf [0] != expected) {
612 dev_dbg (&iface->dev, "get config --> %d %d (1 %d)\n",
613 retval, dev->buf[0], expected);
614 return (retval < 0) ? retval : -EDOM;
618 /* there's always [9.4.3] a device descriptor [9.6.1] */
619 retval = usb_get_descriptor (udev, USB_DT_DEVICE, 0,
620 dev->buf, sizeof udev->descriptor);
621 if (retval != sizeof udev->descriptor) {
622 dev_dbg (&iface->dev, "dev descriptor --> %d\n", retval);
623 return (retval < 0) ? retval : -EDOM;
626 /* there's always [9.4.3] at least one config descriptor [9.6.3] */
627 for (i = 0; i < udev->descriptor.bNumConfigurations; i++) {
628 retval = usb_get_descriptor (udev, USB_DT_CONFIG, i,
629 dev->buf, TBUF_SIZE);
630 if (!is_good_config (dev->buf, retval)) {
631 dev_dbg (&iface->dev,
632 "config [%d] descriptor --> %d\n",
634 return (retval < 0) ? retval : -EDOM;
637 // FIXME cross-checking udev->config[i] to make sure usbcore
638 // parsed it right (etc) would be good testing paranoia
641 /* and sometimes [9.2.6.6] speed dependent descriptors */
642 if (le16_to_cpu(udev->descriptor.bcdUSB) == 0x0200) {
643 struct usb_qualifier_descriptor *d = NULL;
645 /* device qualifier [9.6.2] */
646 retval = usb_get_descriptor (udev,
647 USB_DT_DEVICE_QUALIFIER, 0, dev->buf,
648 sizeof (struct usb_qualifier_descriptor));
649 if (retval == -EPIPE) {
650 if (udev->speed == USB_SPEED_HIGH) {
651 dev_dbg (&iface->dev,
652 "hs dev qualifier --> %d\n",
654 return (retval < 0) ? retval : -EDOM;
656 /* usb2.0 but not high-speed capable; fine */
657 } else if (retval != sizeof (struct usb_qualifier_descriptor)) {
658 dev_dbg (&iface->dev, "dev qualifier --> %d\n", retval);
659 return (retval < 0) ? retval : -EDOM;
661 d = (struct usb_qualifier_descriptor *) dev->buf;
663 /* might not have [9.6.2] any other-speed configs [9.6.4] */
665 unsigned max = d->bNumConfigurations;
666 for (i = 0; i < max; i++) {
667 retval = usb_get_descriptor (udev,
668 USB_DT_OTHER_SPEED_CONFIG, i,
669 dev->buf, TBUF_SIZE);
670 if (!is_good_config (dev->buf, retval)) {
671 dev_dbg (&iface->dev,
672 "other speed config --> %d\n",
674 return (retval < 0) ? retval : -EDOM;
679 // FIXME fetch strings from at least the device descriptor
681 /* [9.4.5] get_status always works */
682 retval = usb_get_status (udev, USB_RECIP_DEVICE, 0, dev->buf);
684 dev_dbg (&iface->dev, "get dev status --> %d\n", retval);
685 return (retval < 0) ? retval : -EDOM;
688 // FIXME configuration.bmAttributes says if we could try to set/clear
689 // the device's remote wakeup feature ... if we can, test that here
691 retval = usb_get_status (udev, USB_RECIP_INTERFACE,
692 iface->altsetting [0].desc.bInterfaceNumber, dev->buf);
694 dev_dbg (&iface->dev, "get interface status --> %d\n", retval);
695 return (retval < 0) ? retval : -EDOM;
697 // FIXME get status for each endpoint in the interface
702 /*-------------------------------------------------------------------------*/
704 /* use ch9 requests to test whether:
705 * (a) queues work for control, keeping N subtests queued and
706 * active (auto-resubmit) for M loops through the queue.
707 * (b) protocol stalls (control-only) will autorecover.
708 * it's not like bulk/intr; no halt clearing.
709 * (c) short control reads are reported and handled.
710 * (d) queues are always processed in-order
715 struct usbtest_dev *dev;
716 struct completion complete;
721 struct usbtest_param *param;
725 #define NUM_SUBCASES 15 /* how many test subcases here? */
728 struct usb_ctrlrequest setup;
733 static void ctrl_complete (struct urb *urb, struct pt_regs *regs)
735 struct ctrl_ctx *ctx = urb->context;
736 struct usb_ctrlrequest *reqp;
737 struct subcase *subcase;
738 int status = urb->status;
740 reqp = (struct usb_ctrlrequest *)urb->setup_packet;
741 subcase = container_of (reqp, struct subcase, setup);
743 spin_lock (&ctx->lock);
747 /* queue must transfer and complete in fifo order, unless
748 * usb_unlink_urb() is used to unlink something not at the
749 * physical queue head (not tested).
751 if (subcase->number > 0) {
752 if ((subcase->number - ctx->last) != 1) {
753 dbg ("subcase %d completed out of order, last %d",
754 subcase->number, ctx->last);
756 ctx->last = subcase->number;
760 ctx->last = subcase->number;
762 /* succeed or fault in only one way? */
763 if (status == subcase->expected)
766 /* async unlink for cleanup? */
767 else if (status != -ECONNRESET) {
769 /* some faults are allowed, not required */
770 if (subcase->expected > 0 && (
771 ((urb->status == -subcase->expected /* happened */
772 || urb->status == 0)))) /* didn't */
774 /* sometimes more than one fault is allowed */
775 else if (subcase->number == 12 && status == -EPIPE)
778 dbg ("subtest %d error, status %d",
779 subcase->number, status);
782 /* unexpected status codes mean errors; ideally, in hardware */
785 if (ctx->status == 0) {
788 ctx->status = status;
789 info ("control queue %02x.%02x, err %d, %d left",
790 reqp->bRequestType, reqp->bRequest,
793 /* FIXME this "unlink everything" exit route should
794 * be a separate test case.
797 /* unlink whatever's still pending */
798 for (i = 1; i < ctx->param->sglen; i++) {
799 struct urb *u = ctx->urb [
800 (i + subcase->number) % ctx->param->sglen];
802 if (u == urb || !u->dev)
804 spin_unlock(&ctx->lock);
805 status = usb_unlink_urb (u);
806 spin_lock(&ctx->lock);
813 dbg ("urb unlink --> %d", status);
816 status = ctx->status;
820 /* resubmit if we need to, else mark this as done */
821 if ((status == 0) && (ctx->pending < ctx->count)) {
822 if ((status = usb_submit_urb (urb, SLAB_ATOMIC)) != 0) {
823 dbg ("can't resubmit ctrl %02x.%02x, err %d",
824 reqp->bRequestType, reqp->bRequest, status);
831 /* signal completion when nothing's queued */
832 if (ctx->pending == 0)
833 complete (&ctx->complete);
834 spin_unlock (&ctx->lock);
838 test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
840 struct usb_device *udev = testdev_to_usbdev (dev);
842 struct ctrl_ctx context;
845 spin_lock_init (&context.lock);
847 init_completion (&context.complete);
848 context.count = param->sglen * param->iterations;
850 context.status = -ENOMEM;
851 context.param = param;
854 /* allocate and init the urbs we'll queue.
855 * as with bulk/intr sglists, sglen is the queue depth; it also
856 * controls which subtests run (more tests than sglen) or rerun.
858 urb = kcalloc(param->sglen, sizeof(struct urb *), SLAB_KERNEL);
861 for (i = 0; i < param->sglen; i++) {
862 int pipe = usb_rcvctrlpipe (udev, 0);
865 struct usb_ctrlrequest req;
866 struct subcase *reqp;
869 /* requests here are mostly expected to succeed on any
870 * device, but some are chosen to trigger protocol stalls
873 memset (&req, 0, sizeof req);
874 req.bRequest = USB_REQ_GET_DESCRIPTOR;
875 req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
877 switch (i % NUM_SUBCASES) {
878 case 0: // get device descriptor
879 req.wValue = cpu_to_le16 (USB_DT_DEVICE << 8);
880 len = sizeof (struct usb_device_descriptor);
882 case 1: // get first config descriptor (only)
883 req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
884 len = sizeof (struct usb_config_descriptor);
886 case 2: // get altsetting (OFTEN STALLS)
887 req.bRequest = USB_REQ_GET_INTERFACE;
888 req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
889 // index = 0 means first interface
893 case 3: // get interface status
894 req.bRequest = USB_REQ_GET_STATUS;
895 req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE;
899 case 4: // get device status
900 req.bRequest = USB_REQ_GET_STATUS;
901 req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE;
904 case 5: // get device qualifier (MAY STALL)
905 req.wValue = cpu_to_le16 (USB_DT_DEVICE_QUALIFIER << 8);
906 len = sizeof (struct usb_qualifier_descriptor);
907 if (udev->speed != USB_SPEED_HIGH)
910 case 6: // get first config descriptor, plus interface
911 req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
912 len = sizeof (struct usb_config_descriptor);
913 len += sizeof (struct usb_interface_descriptor);
915 case 7: // get interface descriptor (ALWAYS STALLS)
916 req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8);
918 len = sizeof (struct usb_interface_descriptor);
921 // NOTE: two consecutive stalls in the queue here.
922 // that tests fault recovery a bit more aggressively.
923 case 8: // clear endpoint halt (USUALLY STALLS)
924 req.bRequest = USB_REQ_CLEAR_FEATURE;
925 req.bRequestType = USB_RECIP_ENDPOINT;
926 // wValue 0 == ep halt
927 // wIndex 0 == ep0 (shouldn't halt!)
929 pipe = usb_sndctrlpipe (udev, 0);
932 case 9: // get endpoint status
933 req.bRequest = USB_REQ_GET_STATUS;
934 req.bRequestType = USB_DIR_IN|USB_RECIP_ENDPOINT;
938 case 10: // trigger short read (EREMOTEIO)
939 req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
941 expected = -EREMOTEIO;
943 // NOTE: two consecutive _different_ faults in the queue.
944 case 11: // get endpoint descriptor (ALWAYS STALLS)
945 req.wValue = cpu_to_le16 (USB_DT_ENDPOINT << 8);
947 len = sizeof (struct usb_interface_descriptor);
950 // NOTE: sometimes even a third fault in the queue!
951 case 12: // get string 0 descriptor (MAY STALL)
952 req.wValue = cpu_to_le16 (USB_DT_STRING << 8);
953 // string == 0, for language IDs
954 len = sizeof (struct usb_interface_descriptor);
955 // may succeed when > 4 languages
956 expected = EREMOTEIO; // or EPIPE, if no strings
958 case 13: // short read, resembling case 10
959 req.wValue = cpu_to_le16 ((USB_DT_CONFIG << 8) | 0);
960 // last data packet "should" be DATA1, not DATA0
961 len = 1024 - udev->descriptor.bMaxPacketSize0;
962 expected = -EREMOTEIO;
964 case 14: // short read; try to fill the last packet
965 req.wValue = cpu_to_le16 ((USB_DT_DEVICE << 8) | 0);
966 // device descriptor size == 18 bytes
967 len = udev->descriptor.bMaxPacketSize0;
969 case 8: len = 24; break;
970 case 16: len = 32; break;
972 expected = -EREMOTEIO;
975 err ("bogus number of ctrl queue testcases!");
976 context.status = -EINVAL;
979 req.wLength = cpu_to_le16 (len);
980 urb [i] = u = simple_alloc_urb (udev, pipe, len);
984 reqp = usb_buffer_alloc (udev, sizeof *reqp, SLAB_KERNEL,
989 reqp->number = i % NUM_SUBCASES;
990 reqp->expected = expected;
991 u->setup_packet = (char *) &reqp->setup;
992 u->transfer_flags |= URB_NO_SETUP_DMA_MAP;
994 u->context = &context;
995 u->complete = ctrl_complete;
1000 spin_lock_irq (&context.lock);
1001 for (i = 0; i < param->sglen; i++) {
1002 context.status = usb_submit_urb (urb [i], SLAB_ATOMIC);
1003 if (context.status != 0) {
1004 dbg ("can't submit urb[%d], status %d",
1006 context.count = context.pending;
1011 spin_unlock_irq (&context.lock);
1013 /* FIXME set timer and time out; provide a disconnect hook */
1015 /* wait for the last one to complete */
1016 if (context.pending > 0)
1017 wait_for_completion (&context.complete);
1020 for (i = 0; i < param->sglen; i++) {
1023 urb [i]->dev = udev;
1024 if (urb [i]->setup_packet)
1025 usb_buffer_free (udev, sizeof (struct usb_ctrlrequest),
1026 urb [i]->setup_packet,
1027 urb [i]->setup_dma);
1028 simple_free_urb (urb [i]);
1031 return context.status;
1036 /*-------------------------------------------------------------------------*/
1038 static void unlink1_callback (struct urb *urb, struct pt_regs *regs)
1040 int status = urb->status;
1042 // we "know" -EPIPE (stall) never happens
1044 status = usb_submit_urb (urb, SLAB_ATOMIC);
1046 urb->status = status;
1047 complete ((struct completion *) urb->context);
1051 static int unlink1 (struct usbtest_dev *dev, int pipe, int size, int async)
1054 struct completion completion;
1057 init_completion (&completion);
1058 urb = simple_alloc_urb (testdev_to_usbdev (dev), pipe, size);
1061 urb->context = &completion;
1062 urb->complete = unlink1_callback;
1064 /* keep the endpoint busy. there are lots of hc/hcd-internal
1065 * states, and testing should get to all of them over time.
1067 * FIXME want additional tests for when endpoint is STALLing
1068 * due to errors, or is just NAKing requests.
1070 if ((retval = usb_submit_urb (urb, SLAB_KERNEL)) != 0) {
1071 dev_dbg (&dev->intf->dev, "submit fail %d\n", retval);
1075 /* unlinking that should always work. variable delay tests more
1076 * hcd states and code paths, even with little other system load.
1078 msleep (jiffies % (2 * INTERRUPT_RATE));
1081 retval = usb_unlink_urb (urb);
1082 if (retval == -EBUSY || retval == -EIDRM) {
1083 /* we can't unlink urbs while they're completing.
1084 * or if they've completed, and we haven't resubmitted.
1085 * "normal" drivers would prevent resubmission, but
1086 * since we're testing unlink paths, we can't.
1088 dev_dbg (&dev->intf->dev, "unlink retry\n");
1093 if (!(retval == 0 || retval == -EINPROGRESS)) {
1094 dev_dbg (&dev->intf->dev, "unlink fail %d\n", retval);
1098 wait_for_completion (&completion);
1099 retval = urb->status;
1100 simple_free_urb (urb);
1103 return (retval == -ECONNRESET) ? 0 : retval - 1000;
1105 return (retval == -ENOENT || retval == -EPERM) ?
1109 static int unlink_simple (struct usbtest_dev *dev, int pipe, int len)
1113 /* test sync and async paths */
1114 retval = unlink1 (dev, pipe, len, 1);
1116 retval = unlink1 (dev, pipe, len, 0);
1120 /*-------------------------------------------------------------------------*/
1122 static int verify_not_halted (int ep, struct urb *urb)
1127 /* shouldn't look or act halted */
1128 retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
1130 dbg ("ep %02x couldn't get no-halt status, %d", ep, retval);
1134 dbg ("ep %02x bogus status: %04x != 0", ep, status);
1137 retval = simple_io (urb, 1, 0, 0, __FUNCTION__);
1143 static int verify_halted (int ep, struct urb *urb)
1148 /* should look and act halted */
1149 retval = usb_get_status (urb->dev, USB_RECIP_ENDPOINT, ep, &status);
1151 dbg ("ep %02x couldn't get halt status, %d", ep, retval);
1155 dbg ("ep %02x bogus status: %04x != 1", ep, status);
1158 retval = simple_io (urb, 1, 0, -EPIPE, __FUNCTION__);
1159 if (retval != -EPIPE)
1161 retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted");
1162 if (retval != -EPIPE)
1167 static int test_halt (int ep, struct urb *urb)
1171 /* shouldn't look or act halted now */
1172 retval = verify_not_halted (ep, urb);
1176 /* set halt (protocol test only), verify it worked */
1177 retval = usb_control_msg (urb->dev, usb_sndctrlpipe (urb->dev, 0),
1178 USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
1179 USB_ENDPOINT_HALT, ep,
1180 NULL, 0, USB_CTRL_SET_TIMEOUT);
1182 dbg ("ep %02x couldn't set halt, %d", ep, retval);
1185 retval = verify_halted (ep, urb);
1189 /* clear halt (tests API + protocol), verify it worked */
1190 retval = usb_clear_halt (urb->dev, urb->pipe);
1192 dbg ("ep %02x couldn't clear halt, %d", ep, retval);
1195 retval = verify_not_halted (ep, urb);
1199 /* NOTE: could also verify SET_INTERFACE clear halts ... */
1204 static int halt_simple (struct usbtest_dev *dev)
1210 urb = simple_alloc_urb (testdev_to_usbdev (dev), 0, 512);
1215 ep = usb_pipeendpoint (dev->in_pipe) | USB_DIR_IN;
1216 urb->pipe = dev->in_pipe;
1217 retval = test_halt (ep, urb);
1222 if (dev->out_pipe) {
1223 ep = usb_pipeendpoint (dev->out_pipe);
1224 urb->pipe = dev->out_pipe;
1225 retval = test_halt (ep, urb);
1228 simple_free_urb (urb);
1232 /*-------------------------------------------------------------------------*/
1234 /* Control OUT tests use the vendor control requests from Intel's
1235 * USB 2.0 compliance test device: write a buffer, read it back.
1237 * Intel's spec only _requires_ that it work for one packet, which
1238 * is pretty weak. Some HCDs place limits here; most devices will
1239 * need to be able to handle more than one OUT data packet. We'll
1240 * try whatever we're told to try.
1242 static int ctrl_out (struct usbtest_dev *dev,
1243 unsigned count, unsigned length, unsigned vary)
1249 struct usb_device *udev;
1251 if (length < 1 || length > 0xffff || vary >= length)
1254 buf = kmalloc(length, SLAB_KERNEL);
1258 udev = testdev_to_usbdev (dev);
1262 /* NOTE: hardware might well act differently if we pushed it
1263 * with lots back-to-back queued requests.
1265 for (i = 0; i < count; i++) {
1266 /* write patterned data */
1267 for (j = 0; j < len; j++)
1269 retval = usb_control_msg (udev, usb_sndctrlpipe (udev,0),
1270 0x5b, USB_DIR_OUT|USB_TYPE_VENDOR,
1271 0, 0, buf, len, USB_CTRL_SET_TIMEOUT);
1272 if (retval != len) {
1275 INFO(dev, "ctrl_out, wlen %d (expected %d)\n",
1282 /* read it back -- assuming nothing intervened!! */
1283 retval = usb_control_msg (udev, usb_rcvctrlpipe (udev,0),
1284 0x5c, USB_DIR_IN|USB_TYPE_VENDOR,
1285 0, 0, buf, len, USB_CTRL_GET_TIMEOUT);
1286 if (retval != len) {
1289 INFO(dev, "ctrl_out, rlen %d (expected %d)\n",
1296 /* fail if we can't verify */
1297 for (j = 0; j < len; j++) {
1298 if (buf [j] != (u8) (i + j)) {
1299 INFO (dev, "ctrl_out, byte %d is %d not %d\n",
1300 j, buf [j], (u8) i + j);
1312 /* [real world] the "zero bytes IN" case isn't really used.
1313 * hardware can easily trip up in this wierd case, since its
1314 * status stage is IN, not OUT like other ep0in transfers.
1317 len = realworld ? 1 : 0;
1321 INFO (dev, "ctrl_out %s failed, code %d, count %d\n",
1328 /*-------------------------------------------------------------------------*/
1330 /* ISO tests ... mimics common usage
1331 * - buffer length is split into N packets (mostly maxpacket sized)
1332 * - multi-buffers according to sglen
1335 struct iso_context {
1339 struct completion done;
1341 unsigned long errors;
1342 unsigned long packet_count;
1343 struct usbtest_dev *dev;
1346 static void iso_callback (struct urb *urb, struct pt_regs *regs)
1348 struct iso_context *ctx = urb->context;
1350 spin_lock(&ctx->lock);
1353 ctx->packet_count += urb->number_of_packets;
1354 if (urb->error_count > 0)
1355 ctx->errors += urb->error_count;
1356 else if (urb->status != 0)
1357 ctx->errors += urb->number_of_packets;
1359 if (urb->status == 0 && ctx->count > (ctx->pending - 1)
1360 && !ctx->submit_error) {
1361 int status = usb_submit_urb (urb, GFP_ATOMIC);
1366 dev_dbg (&ctx->dev->intf->dev,
1367 "iso resubmit err %d\n",
1370 case -ENODEV: /* disconnected */
1371 case -ESHUTDOWN: /* endpoint disabled */
1372 ctx->submit_error = 1;
1376 simple_free_urb (urb);
1379 if (ctx->pending == 0) {
1381 dev_dbg (&ctx->dev->intf->dev,
1382 "iso test, %lu errors out of %lu\n",
1383 ctx->errors, ctx->packet_count);
1384 complete (&ctx->done);
1387 spin_unlock(&ctx->lock);
1390 static struct urb *iso_alloc_urb (
1391 struct usb_device *udev,
1393 struct usb_endpoint_descriptor *desc,
1398 unsigned i, maxp, packets;
1400 if (bytes < 0 || !desc)
1402 maxp = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
1403 maxp *= 1 + (0x3 & (le16_to_cpu(desc->wMaxPacketSize) >> 11));
1404 packets = (bytes + maxp - 1) / maxp;
1406 urb = usb_alloc_urb (packets, SLAB_KERNEL);
1412 urb->number_of_packets = packets;
1413 urb->transfer_buffer_length = bytes;
1414 urb->transfer_buffer = usb_buffer_alloc (udev, bytes, SLAB_KERNEL,
1415 &urb->transfer_dma);
1416 if (!urb->transfer_buffer) {
1420 memset (urb->transfer_buffer, 0, bytes);
1421 for (i = 0; i < packets; i++) {
1422 /* here, only the last packet will be short */
1423 urb->iso_frame_desc[i].length = min ((unsigned) bytes, maxp);
1424 bytes -= urb->iso_frame_desc[i].length;
1426 urb->iso_frame_desc[i].offset = maxp * i;
1429 urb->complete = iso_callback;
1430 // urb->context = SET BY CALLER
1431 urb->interval = 1 << (desc->bInterval - 1);
1432 urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
1437 test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param,
1438 int pipe, struct usb_endpoint_descriptor *desc)
1440 struct iso_context context;
1441 struct usb_device *udev;
1443 unsigned long packets = 0;
1445 struct urb *urbs[10]; /* FIXME no limit */
1447 if (param->sglen > 10)
1450 memset(&context, 0, sizeof context);
1451 context.count = param->iterations * param->sglen;
1453 init_completion (&context.done);
1454 spin_lock_init (&context.lock);
1456 memset (urbs, 0, sizeof urbs);
1457 udev = testdev_to_usbdev (dev);
1458 dev_dbg (&dev->intf->dev,
1459 "... iso period %d %sframes, wMaxPacket %04x\n",
1460 1 << (desc->bInterval - 1),
1461 (udev->speed == USB_SPEED_HIGH) ? "micro" : "",
1462 le16_to_cpu(desc->wMaxPacketSize));
1464 for (i = 0; i < param->sglen; i++) {
1465 urbs [i] = iso_alloc_urb (udev, pipe, desc,
1471 packets += urbs[i]->number_of_packets;
1472 urbs [i]->context = &context;
1474 packets *= param->iterations;
1475 dev_dbg (&dev->intf->dev,
1476 "... total %lu msec (%lu packets)\n",
1477 (packets * (1 << (desc->bInterval - 1)))
1478 / ((udev->speed == USB_SPEED_HIGH) ? 8 : 1),
1481 spin_lock_irq (&context.lock);
1482 for (i = 0; i < param->sglen; i++) {
1484 status = usb_submit_urb (urbs [i], SLAB_ATOMIC);
1486 ERROR (dev, "submit iso[%d], error %d\n", i, status);
1488 spin_unlock_irq (&context.lock);
1492 simple_free_urb (urbs [i]);
1494 context.submit_error = 1;
1498 spin_unlock_irq (&context.lock);
1500 wait_for_completion (&context.done);
1503 * Isochronous transfers are expected to fail sometimes. As an
1504 * arbitrary limit, we will report an error if any submissions
1505 * fail or if the transfer failure rate is > 10%.
1509 else if (context.submit_error)
1511 else if (context.errors > context.packet_count / 10)
1516 for (i = 0; i < param->sglen; i++) {
1518 simple_free_urb (urbs [i]);
1523 /*-------------------------------------------------------------------------*/
1525 /* We only have this one interface to user space, through usbfs.
1526 * User mode code can scan usbfs to find N different devices (maybe on
1527 * different busses) to use when testing, and allocate one thread per
1528 * test. So discovery is simplified, and we have no device naming issues.
1530 * Don't use these only as stress/load tests. Use them along with with
1531 * other USB bus activity: plugging, unplugging, mousing, mp3 playback,
1532 * video capture, and so on. Run different tests at different times, in
1533 * different sequences. Nothing here should interact with other devices,
1534 * except indirectly by consuming USB bandwidth and CPU resources for test
1535 * threads and request completion. But the only way to know that for sure
1536 * is to test when HC queues are in use by many devices.
1540 usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
1542 struct usbtest_dev *dev = usb_get_intfdata (intf);
1543 struct usb_device *udev = testdev_to_usbdev (dev);
1544 struct usbtest_param *param = buf;
1545 int retval = -EOPNOTSUPP;
1547 struct scatterlist *sg;
1548 struct usb_sg_request req;
1549 struct timeval start;
1552 // FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is.
1554 if (code != USBTEST_REQUEST)
1557 if (param->iterations <= 0 || param->length < 0
1558 || param->sglen < 0 || param->vary < 0)
1561 if (down_interruptible (&dev->sem))
1562 return -ERESTARTSYS;
1564 if (intf->dev.power.power_state.event != PM_EVENT_ON) {
1566 return -EHOSTUNREACH;
1569 /* some devices, like ez-usb default devices, need a non-default
1570 * altsetting to have any active endpoints. some tests change
1571 * altsettings; force a default so most tests don't need to check.
1573 if (dev->info->alt >= 0) {
1576 if (intf->altsetting->desc.bInterfaceNumber) {
1580 res = set_altsetting (dev, dev->info->alt);
1582 dev_err (&intf->dev,
1583 "set altsetting to %d failed, %d\n",
1584 dev->info->alt, res);
1591 * Just a bunch of test cases that every HCD is expected to handle.
1593 * Some may need specific firmware, though it'd be good to have
1594 * one firmware image to handle all the test cases.
1596 * FIXME add more tests! cancel requests, verify the data, control
1597 * queueing, concurrent read+write threads, and so on.
1599 do_gettimeofday (&start);
1600 switch (param->test_num) {
1603 dev_dbg (&intf->dev, "TEST 0: NOP\n");
1607 /* Simple non-queued bulk I/O tests */
1609 if (dev->out_pipe == 0)
1611 dev_dbg (&intf->dev,
1612 "TEST 1: write %d bytes %u times\n",
1613 param->length, param->iterations);
1614 urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
1619 // FIRMWARE: bulk sink (maybe accepts short writes)
1620 retval = simple_io (urb, param->iterations, 0, 0, "test1");
1621 simple_free_urb (urb);
1624 if (dev->in_pipe == 0)
1626 dev_dbg (&intf->dev,
1627 "TEST 2: read %d bytes %u times\n",
1628 param->length, param->iterations);
1629 urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
1634 // FIRMWARE: bulk source (maybe generates short writes)
1635 retval = simple_io (urb, param->iterations, 0, 0, "test2");
1636 simple_free_urb (urb);
1639 if (dev->out_pipe == 0 || param->vary == 0)
1641 dev_dbg (&intf->dev,
1642 "TEST 3: write/%d 0..%d bytes %u times\n",
1643 param->vary, param->length, param->iterations);
1644 urb = simple_alloc_urb (udev, dev->out_pipe, param->length);
1649 // FIRMWARE: bulk sink (maybe accepts short writes)
1650 retval = simple_io (urb, param->iterations, param->vary,
1652 simple_free_urb (urb);
1655 if (dev->in_pipe == 0 || param->vary == 0)
1657 dev_dbg (&intf->dev,
1658 "TEST 4: read/%d 0..%d bytes %u times\n",
1659 param->vary, param->length, param->iterations);
1660 urb = simple_alloc_urb (udev, dev->in_pipe, param->length);
1665 // FIRMWARE: bulk source (maybe generates short writes)
1666 retval = simple_io (urb, param->iterations, param->vary,
1668 simple_free_urb (urb);
1671 /* Queued bulk I/O tests */
1673 if (dev->out_pipe == 0 || param->sglen == 0)
1675 dev_dbg (&intf->dev,
1676 "TEST 5: write %d sglists %d entries of %d bytes\n",
1678 param->sglen, param->length);
1679 sg = alloc_sglist (param->sglen, param->length, 0);
1684 // FIRMWARE: bulk sink (maybe accepts short writes)
1685 retval = perform_sglist (udev, param->iterations, dev->out_pipe,
1686 &req, sg, param->sglen);
1687 free_sglist (sg, param->sglen);
1691 if (dev->in_pipe == 0 || param->sglen == 0)
1693 dev_dbg (&intf->dev,
1694 "TEST 6: read %d sglists %d entries of %d bytes\n",
1696 param->sglen, param->length);
1697 sg = alloc_sglist (param->sglen, param->length, 0);
1702 // FIRMWARE: bulk source (maybe generates short writes)
1703 retval = perform_sglist (udev, param->iterations, dev->in_pipe,
1704 &req, sg, param->sglen);
1705 free_sglist (sg, param->sglen);
1708 if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0)
1710 dev_dbg (&intf->dev,
1711 "TEST 7: write/%d %d sglists %d entries 0..%d bytes\n",
1712 param->vary, param->iterations,
1713 param->sglen, param->length);
1714 sg = alloc_sglist (param->sglen, param->length, param->vary);
1719 // FIRMWARE: bulk sink (maybe accepts short writes)
1720 retval = perform_sglist (udev, param->iterations, dev->out_pipe,
1721 &req, sg, param->sglen);
1722 free_sglist (sg, param->sglen);
1725 if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0)
1727 dev_dbg (&intf->dev,
1728 "TEST 8: read/%d %d sglists %d entries 0..%d bytes\n",
1729 param->vary, param->iterations,
1730 param->sglen, param->length);
1731 sg = alloc_sglist (param->sglen, param->length, param->vary);
1736 // FIRMWARE: bulk source (maybe generates short writes)
1737 retval = perform_sglist (udev, param->iterations, dev->in_pipe,
1738 &req, sg, param->sglen);
1739 free_sglist (sg, param->sglen);
1742 /* non-queued sanity tests for control (chapter 9 subset) */
1745 dev_dbg (&intf->dev,
1746 "TEST 9: ch9 (subset) control tests, %d times\n",
1748 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1749 retval = ch9_postconfig (dev);
1751 dbg ("ch9 subset failed, iterations left %d", i);
1754 /* queued control messaging */
1756 if (param->sglen == 0)
1759 dev_dbg (&intf->dev,
1760 "TEST 10: queue %d control calls, %d times\n",
1763 retval = test_ctrl_queue (dev, param);
1766 /* simple non-queued unlinks (ring with one urb) */
1768 if (dev->in_pipe == 0 || !param->length)
1771 dev_dbg (&intf->dev, "TEST 11: unlink %d reads of %d\n",
1772 param->iterations, param->length);
1773 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1774 retval = unlink_simple (dev, dev->in_pipe,
1777 dev_dbg (&intf->dev, "unlink reads failed %d, "
1778 "iterations left %d\n", retval, i);
1781 if (dev->out_pipe == 0 || !param->length)
1784 dev_dbg (&intf->dev, "TEST 12: unlink %d writes of %d\n",
1785 param->iterations, param->length);
1786 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1787 retval = unlink_simple (dev, dev->out_pipe,
1790 dev_dbg (&intf->dev, "unlink writes failed %d, "
1791 "iterations left %d\n", retval, i);
1796 if (dev->out_pipe == 0 && dev->in_pipe == 0)
1799 dev_dbg (&intf->dev, "TEST 13: set/clear %d halts\n",
1801 for (i = param->iterations; retval == 0 && i--; /* NOP */)
1802 retval = halt_simple (dev);
1805 DBG (dev, "halts failed, iterations left %d\n", i);
1808 /* control write tests */
1810 if (!dev->info->ctrl_out)
1812 dev_dbg (&intf->dev, "TEST 14: %d ep0out, %d..%d vary %d\n",
1814 realworld ? 1 : 0, param->length,
1816 retval = ctrl_out (dev, param->iterations,
1817 param->length, param->vary);
1820 /* iso write tests */
1822 if (dev->out_iso_pipe == 0 || param->sglen == 0)
1824 dev_dbg (&intf->dev,
1825 "TEST 15: write %d iso, %d entries of %d bytes\n",
1827 param->sglen, param->length);
1828 // FIRMWARE: iso sink
1829 retval = test_iso_queue (dev, param,
1830 dev->out_iso_pipe, dev->iso_out);
1833 /* iso read tests */
1835 if (dev->in_iso_pipe == 0 || param->sglen == 0)
1837 dev_dbg (&intf->dev,
1838 "TEST 16: read %d iso, %d entries of %d bytes\n",
1840 param->sglen, param->length);
1841 // FIRMWARE: iso source
1842 retval = test_iso_queue (dev, param,
1843 dev->in_iso_pipe, dev->iso_in);
1846 // FIXME unlink from queue (ring with N urbs)
1848 // FIXME scatterlist cancel (needs helper thread)
1851 do_gettimeofday (¶m->duration);
1852 param->duration.tv_sec -= start.tv_sec;
1853 param->duration.tv_usec -= start.tv_usec;
1854 if (param->duration.tv_usec < 0) {
1855 param->duration.tv_usec += 1000 * 1000;
1856 param->duration.tv_sec -= 1;
1862 /*-------------------------------------------------------------------------*/
1864 static unsigned force_interrupt = 0;
1865 module_param (force_interrupt, uint, 0);
1866 MODULE_PARM_DESC (force_interrupt, "0 = test default; else interrupt");
1869 static unsigned short vendor;
1870 module_param(vendor, ushort, 0);
1871 MODULE_PARM_DESC (vendor, "vendor code (from usb-if)");
1873 static unsigned short product;
1874 module_param(product, ushort, 0);
1875 MODULE_PARM_DESC (product, "product code (from vendor)");
1879 usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
1881 struct usb_device *udev;
1882 struct usbtest_dev *dev;
1883 struct usbtest_info *info;
1884 char *rtest, *wtest;
1885 char *irtest, *iwtest;
1887 udev = interface_to_usbdev (intf);
1890 /* specify devices by module parameters? */
1891 if (id->match_flags == 0) {
1892 /* vendor match required, product match optional */
1893 if (!vendor || le16_to_cpu(udev->descriptor.idVendor) != (u16)vendor)
1895 if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product)
1897 dbg ("matched module params, vend=0x%04x prod=0x%04x",
1898 le16_to_cpu(udev->descriptor.idVendor),
1899 le16_to_cpu(udev->descriptor.idProduct));
1903 dev = kzalloc(sizeof(*dev), SLAB_KERNEL);
1906 info = (struct usbtest_info *) id->driver_info;
1908 init_MUTEX (&dev->sem);
1912 /* cacheline-aligned scratch for i/o */
1913 if ((dev->buf = kmalloc (TBUF_SIZE, SLAB_KERNEL)) == NULL) {
1918 /* NOTE this doesn't yet test the handful of difference that are
1919 * visible with high speed interrupts: bigger maxpacket (1K) and
1920 * "high bandwidth" modes (up to 3 packets/uframe).
1923 irtest = iwtest = "";
1924 if (force_interrupt || udev->speed == USB_SPEED_LOW) {
1926 dev->in_pipe = usb_rcvintpipe (udev, info->ep_in);
1930 dev->out_pipe = usb_sndintpipe (udev, info->ep_out);
1931 wtest = " intr-out";
1934 if (info->autoconf) {
1937 status = get_endpoints (dev, intf);
1939 dbg ("couldn't get endpoints, %d\n", status);
1942 /* may find bulk or ISO pipes */
1945 dev->in_pipe = usb_rcvbulkpipe (udev,
1948 dev->out_pipe = usb_sndbulkpipe (udev,
1954 wtest = " bulk-out";
1955 if (dev->in_iso_pipe)
1957 if (dev->out_iso_pipe)
1958 iwtest = " iso-out";
1961 usb_set_intfdata (intf, dev);
1962 dev_info (&intf->dev, "%s\n", info->name);
1963 dev_info (&intf->dev, "%s speed {control%s%s%s%s%s} tests%s\n",
1965 switch (udev->speed) {
1966 case USB_SPEED_LOW: tmp = "low"; break;
1967 case USB_SPEED_FULL: tmp = "full"; break;
1968 case USB_SPEED_HIGH: tmp = "high"; break;
1969 default: tmp = "unknown"; break;
1971 info->ctrl_out ? " in/out" : "",
1974 info->alt >= 0 ? " (+alt)" : "");
1978 static int usbtest_suspend (struct usb_interface *intf, pm_message_t message)
1983 static int usbtest_resume (struct usb_interface *intf)
1989 static void usbtest_disconnect (struct usb_interface *intf)
1991 struct usbtest_dev *dev = usb_get_intfdata (intf);
1995 usb_set_intfdata (intf, NULL);
1996 dev_dbg (&intf->dev, "disconnect\n");
2000 /* Basic testing only needs a device that can source or sink bulk traffic.
2001 * Any device can test control transfers (default with GENERIC binding).
2003 * Several entries work with the default EP0 implementation that's built
2004 * into EZ-USB chips. There's a default vendor ID which can be overridden
2005 * by (very) small config EEPROMS, but otherwise all these devices act
2006 * identically until firmware is loaded: only EP0 works. It turns out
2007 * to be easy to make other endpoints work, without modifying that EP0
2008 * behavior. For now, we expect that kind of firmware.
2011 /* an21xx or fx versions of ez-usb */
2012 static struct usbtest_info ez1_info = {
2013 .name = "EZ-USB device",
2019 /* fx2 version of ez-usb */
2020 static struct usbtest_info ez2_info = {
2021 .name = "FX2 device",
2027 /* ezusb family device with dedicated usb test firmware,
2029 static struct usbtest_info fw_info = {
2030 .name = "usb test device",
2034 .autoconf = 1, // iso and ctrl_out need autoconf
2036 .iso = 1, // iso_ep's are #8 in/out
2039 /* peripheral running Linux and 'zero.c' test firmware, or
2040 * its user-mode cousin. different versions of this use
2041 * different hardware with the same vendor/product codes.
2042 * host side MUST rely on the endpoint descriptors.
2044 static struct usbtest_info gz_info = {
2045 .name = "Linux gadget zero",
2051 static struct usbtest_info um_info = {
2052 .name = "Linux user mode test driver",
2057 static struct usbtest_info um2_info = {
2058 .name = "Linux user mode ISO test driver",
2065 /* this is a nice source of high speed bulk data;
2066 * uses an FX2, with firmware provided in the device
2068 static struct usbtest_info ibot2_info = {
2069 .name = "iBOT2 webcam",
2076 /* we can use any device to test control traffic */
2077 static struct usbtest_info generic_info = {
2078 .name = "Generic USB device",
2083 // FIXME remove this
2084 static struct usbtest_info hact_info = {
2092 static struct usb_device_id id_table [] = {
2094 { USB_DEVICE (0x0547, 0x1002),
2095 .driver_info = (unsigned long) &hact_info,
2098 /*-------------------------------------------------------------*/
2100 /* EZ-USB devices which download firmware to replace (or in our
2101 * case augment) the default device implementation.
2104 /* generic EZ-USB FX controller */
2105 { USB_DEVICE (0x0547, 0x2235),
2106 .driver_info = (unsigned long) &ez1_info,
2109 /* CY3671 development board with EZ-USB FX */
2110 { USB_DEVICE (0x0547, 0x0080),
2111 .driver_info = (unsigned long) &ez1_info,
2114 /* generic EZ-USB FX2 controller (or development board) */
2115 { USB_DEVICE (0x04b4, 0x8613),
2116 .driver_info = (unsigned long) &ez2_info,
2119 /* re-enumerated usb test device firmware */
2120 { USB_DEVICE (0xfff0, 0xfff0),
2121 .driver_info = (unsigned long) &fw_info,
2124 /* "Gadget Zero" firmware runs under Linux */
2125 { USB_DEVICE (0x0525, 0xa4a0),
2126 .driver_info = (unsigned long) &gz_info,
2129 /* so does a user-mode variant */
2130 { USB_DEVICE (0x0525, 0xa4a4),
2131 .driver_info = (unsigned long) &um_info,
2134 /* ... and a user-mode variant that talks iso */
2135 { USB_DEVICE (0x0525, 0xa4a3),
2136 .driver_info = (unsigned long) &um2_info,
2140 /* Keyspan 19qi uses an21xx (original EZ-USB) */
2141 // this does not coexist with the real Keyspan 19qi driver!
2142 { USB_DEVICE (0x06cd, 0x010b),
2143 .driver_info = (unsigned long) &ez1_info,
2147 /*-------------------------------------------------------------*/
2150 /* iBOT2 makes a nice source of high speed bulk-in data */
2151 // this does not coexist with a real iBOT2 driver!
2152 { USB_DEVICE (0x0b62, 0x0059),
2153 .driver_info = (unsigned long) &ibot2_info,
2157 /*-------------------------------------------------------------*/
2160 /* module params can specify devices to use for control tests */
2161 { .driver_info = (unsigned long) &generic_info, },
2164 /*-------------------------------------------------------------*/
2168 MODULE_DEVICE_TABLE (usb, id_table);
2170 static struct usb_driver usbtest_driver = {
2172 .id_table = id_table,
2173 .probe = usbtest_probe,
2174 .ioctl = usbtest_ioctl,
2175 .disconnect = usbtest_disconnect,
2176 .suspend = usbtest_suspend,
2177 .resume = usbtest_resume,
2180 /*-------------------------------------------------------------------------*/
2182 static int __init usbtest_init (void)
2186 dbg ("params: vend=0x%04x prod=0x%04x", vendor, product);
2188 return usb_register (&usbtest_driver);
2190 module_init (usbtest_init);
2192 static void __exit usbtest_exit (void)
2194 usb_deregister (&usbtest_driver);
2196 module_exit (usbtest_exit);
2198 MODULE_DESCRIPTION ("USB Core/HCD Testing Driver");
2199 MODULE_LICENSE ("GPL");