ath9k: Fix TX control flag use for no ACK and RTS/CTS
[linux-2.6] / drivers / net / amd8111e.c
1
2 /* Advanced  Micro Devices Inc. AMD8111E Linux Network Driver
3  * Copyright (C) 2004 Advanced Micro Devices
4  *
5  *
6  * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
7  * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
8  * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
9  * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
10  * Copyright 1993 United States Government as represented by the
11  *      Director, National Security Agency.[ pcnet32.c ]
12  * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
13  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
14  *
15  *
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License as published by
18  * the Free Software Foundation; either version 2 of the License, or
19  * (at your option) any later version.
20  *
21  * This program is distributed in the hope that it will be useful,
22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
24  * GNU General Public License for more details.
25  *
26  * You should have received a copy of the GNU General Public License
27  * along with this program; if not, write to the Free Software
28  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
29  * USA
30
31 Module Name:
32
33         amd8111e.c
34
35 Abstract:
36
37          AMD8111 based 10/100 Ethernet Controller Driver.
38
39 Environment:
40
41         Kernel Mode
42
43 Revision History:
44         3.0.0
45            Initial Revision.
46         3.0.1
47          1. Dynamic interrupt coalescing.
48          2. Removed prev_stats.
49          3. MII support.
50          4. Dynamic IPG support
51         3.0.2  05/29/2003
52          1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
53          2. Bug fix: Fixed VLAN support failure.
54          3. Bug fix: Fixed receive interrupt coalescing bug.
55          4. Dynamic IPG support is disabled by default.
56         3.0.3 06/05/2003
57          1. Bug fix: Fixed failure to close the interface if SMP is enabled.
58         3.0.4 12/09/2003
59          1. Added set_mac_address routine for bonding driver support.
60          2. Tested the driver for bonding support
61          3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
62             indicated to the h/w.
63          4. Modified amd8111e_rx() routine to receive all the received packets
64             in the first interrupt.
65          5. Bug fix: Corrected  rx_errors  reported in get_stats() function.
66         3.0.5 03/22/2004
67          1. Added NAPI support
68
69 */
70
71
72 #include <linux/module.h>
73 #include <linux/kernel.h>
74 #include <linux/types.h>
75 #include <linux/compiler.h>
76 #include <linux/slab.h>
77 #include <linux/delay.h>
78 #include <linux/init.h>
79 #include <linux/ioport.h>
80 #include <linux/pci.h>
81 #include <linux/netdevice.h>
82 #include <linux/etherdevice.h>
83 #include <linux/skbuff.h>
84 #include <linux/ethtool.h>
85 #include <linux/mii.h>
86 #include <linux/if_vlan.h>
87 #include <linux/ctype.h>
88 #include <linux/crc32.h>
89 #include <linux/dma-mapping.h>
90
91 #include <asm/system.h>
92 #include <asm/io.h>
93 #include <asm/byteorder.h>
94 #include <asm/uaccess.h>
95
96 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
97 #define AMD8111E_VLAN_TAG_USED 1
98 #else
99 #define AMD8111E_VLAN_TAG_USED 0
100 #endif
101
102 #include "amd8111e.h"
103 #define MODULE_NAME     "amd8111e"
104 #define MODULE_VERS     "3.0.7"
105 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
106 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
107 MODULE_LICENSE("GPL");
108 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
109 module_param_array(speed_duplex, int, NULL, 0);
110 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
111 module_param_array(coalesce, bool, NULL, 0);
112 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
113 module_param_array(dynamic_ipg, bool, NULL, 0);
114 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
115
116 static struct pci_device_id amd8111e_pci_tbl[] = {
117
118         { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
119          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
120         { 0, }
121
122 };
123 /*
124 This function will read the PHY registers.
125 */
126 static int amd8111e_read_phy(struct amd8111e_priv* lp, int phy_id, int reg, u32* val)
127 {
128         void __iomem *mmio = lp->mmio;
129         unsigned int reg_val;
130         unsigned int repeat= REPEAT_CNT;
131
132         reg_val = readl(mmio + PHY_ACCESS);
133         while (reg_val & PHY_CMD_ACTIVE)
134                 reg_val = readl( mmio + PHY_ACCESS );
135
136         writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
137                            ((reg & 0x1f) << 16),  mmio +PHY_ACCESS);
138         do{
139                 reg_val = readl(mmio + PHY_ACCESS);
140                 udelay(30);  /* It takes 30 us to read/write data */
141         } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
142         if(reg_val & PHY_RD_ERR)
143                 goto err_phy_read;
144
145         *val = reg_val & 0xffff;
146         return 0;
147 err_phy_read:
148         *val = 0;
149         return -EINVAL;
150
151 }
152
153 /*
154 This function will write into PHY registers.
155 */
156 static int amd8111e_write_phy(struct amd8111e_priv* lp,int phy_id, int reg, u32 val)
157 {
158         unsigned int repeat = REPEAT_CNT;
159         void __iomem *mmio = lp->mmio;
160         unsigned int reg_val;
161
162         reg_val = readl(mmio + PHY_ACCESS);
163         while (reg_val & PHY_CMD_ACTIVE)
164                 reg_val = readl( mmio + PHY_ACCESS );
165
166         writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
167                            ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
168
169         do{
170                 reg_val = readl(mmio + PHY_ACCESS);
171                 udelay(30);  /* It takes 30 us to read/write the data */
172         } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
173
174         if(reg_val & PHY_RD_ERR)
175                 goto err_phy_write;
176
177         return 0;
178
179 err_phy_write:
180         return -EINVAL;
181
182 }
183 /*
184 This is the mii register read function provided to the mii interface.
185 */
186 static int amd8111e_mdio_read(struct net_device * dev, int phy_id, int reg_num)
187 {
188         struct amd8111e_priv* lp = netdev_priv(dev);
189         unsigned int reg_val;
190
191         amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
192         return reg_val;
193
194 }
195
196 /*
197 This is the mii register write function provided to the mii interface.
198 */
199 static void amd8111e_mdio_write(struct net_device * dev, int phy_id, int reg_num, int val)
200 {
201         struct amd8111e_priv* lp = netdev_priv(dev);
202
203         amd8111e_write_phy(lp, phy_id, reg_num, val);
204 }
205
206 /*
207 This function will set PHY speed. During initialization sets the original speed to 100 full.
208 */
209 static void amd8111e_set_ext_phy(struct net_device *dev)
210 {
211         struct amd8111e_priv *lp = netdev_priv(dev);
212         u32 bmcr,advert,tmp;
213
214         /* Determine mii register values to set the speed */
215         advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
216         tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
217         switch (lp->ext_phy_option){
218
219                 default:
220                 case SPEED_AUTONEG: /* advertise all values */
221                         tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
222                                 ADVERTISE_100HALF|ADVERTISE_100FULL) ;
223                         break;
224                 case SPEED10_HALF:
225                         tmp |= ADVERTISE_10HALF;
226                         break;
227                 case SPEED10_FULL:
228                         tmp |= ADVERTISE_10FULL;
229                         break;
230                 case SPEED100_HALF:
231                         tmp |= ADVERTISE_100HALF;
232                         break;
233                 case SPEED100_FULL:
234                         tmp |= ADVERTISE_100FULL;
235                         break;
236         }
237
238         if(advert != tmp)
239                 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
240         /* Restart auto negotiation */
241         bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
242         bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
243         amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
244
245 }
246
247 /*
248 This function will unmap skb->data space and will free
249 all transmit and receive skbuffs.
250 */
251 static int amd8111e_free_skbs(struct net_device *dev)
252 {
253         struct amd8111e_priv *lp = netdev_priv(dev);
254         struct sk_buff* rx_skbuff;
255         int i;
256
257         /* Freeing transmit skbs */
258         for(i = 0; i < NUM_TX_BUFFERS; i++){
259                 if(lp->tx_skbuff[i]){
260                         pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i],                                        lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
261                         dev_kfree_skb (lp->tx_skbuff[i]);
262                         lp->tx_skbuff[i] = NULL;
263                         lp->tx_dma_addr[i] = 0;
264                 }
265         }
266         /* Freeing previously allocated receive buffers */
267         for (i = 0; i < NUM_RX_BUFFERS; i++){
268                 rx_skbuff = lp->rx_skbuff[i];
269                 if(rx_skbuff != NULL){
270                         pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
271                                   lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
272                         dev_kfree_skb(lp->rx_skbuff[i]);
273                         lp->rx_skbuff[i] = NULL;
274                         lp->rx_dma_addr[i] = 0;
275                 }
276         }
277
278         return 0;
279 }
280
281 /*
282 This will set the receive buffer length corresponding to the mtu size of networkinterface.
283 */
284 static inline void amd8111e_set_rx_buff_len(struct net_device* dev)
285 {
286         struct amd8111e_priv* lp = netdev_priv(dev);
287         unsigned int mtu = dev->mtu;
288
289         if (mtu > ETH_DATA_LEN){
290                 /* MTU + ethernet header + FCS
291                 + optional VLAN tag + skb reserve space 2 */
292
293                 lp->rx_buff_len = mtu + ETH_HLEN + 10;
294                 lp->options |= OPTION_JUMBO_ENABLE;
295         } else{
296                 lp->rx_buff_len = PKT_BUFF_SZ;
297                 lp->options &= ~OPTION_JUMBO_ENABLE;
298         }
299 }
300
301 /*
302 This function will free all the previously allocated buffers, determine new receive buffer length  and will allocate new receive buffers. This function also allocates and initializes both the transmitter and receive hardware descriptors.
303  */
304 static int amd8111e_init_ring(struct net_device *dev)
305 {
306         struct amd8111e_priv *lp = netdev_priv(dev);
307         int i;
308
309         lp->rx_idx = lp->tx_idx = 0;
310         lp->tx_complete_idx = 0;
311         lp->tx_ring_idx = 0;
312
313
314         if(lp->opened)
315                 /* Free previously allocated transmit and receive skbs */
316                 amd8111e_free_skbs(dev);
317
318         else{
319                  /* allocate the tx and rx descriptors */
320                 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
321                         sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
322                         &lp->tx_ring_dma_addr)) == NULL)
323
324                         goto err_no_mem;
325
326                 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
327                         sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
328                         &lp->rx_ring_dma_addr)) == NULL)
329
330                         goto err_free_tx_ring;
331
332         }
333         /* Set new receive buff size */
334         amd8111e_set_rx_buff_len(dev);
335
336         /* Allocating receive  skbs */
337         for (i = 0; i < NUM_RX_BUFFERS; i++) {
338
339                 if (!(lp->rx_skbuff[i] = dev_alloc_skb(lp->rx_buff_len))) {
340                                 /* Release previos allocated skbs */
341                                 for(--i; i >= 0 ;i--)
342                                         dev_kfree_skb(lp->rx_skbuff[i]);
343                                 goto err_free_rx_ring;
344                 }
345                 skb_reserve(lp->rx_skbuff[i],2);
346         }
347         /* Initilaizing receive descriptors */
348         for (i = 0; i < NUM_RX_BUFFERS; i++) {
349                 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
350                         lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
351
352                 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
353                 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
354                 wmb();
355                 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
356         }
357
358         /* Initializing transmit descriptors */
359         for (i = 0; i < NUM_TX_RING_DR; i++) {
360                 lp->tx_ring[i].buff_phy_addr = 0;
361                 lp->tx_ring[i].tx_flags = 0;
362                 lp->tx_ring[i].buff_count = 0;
363         }
364
365         return 0;
366
367 err_free_rx_ring:
368
369         pci_free_consistent(lp->pci_dev,
370                 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
371                 lp->rx_ring_dma_addr);
372
373 err_free_tx_ring:
374
375         pci_free_consistent(lp->pci_dev,
376                  sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
377                  lp->tx_ring_dma_addr);
378
379 err_no_mem:
380         return -ENOMEM;
381 }
382 /* This function will set the interrupt coalescing according to the input arguments */
383 static int amd8111e_set_coalesce(struct net_device * dev, enum coal_mode cmod)
384 {
385         unsigned int timeout;
386         unsigned int event_count;
387
388         struct amd8111e_priv *lp = netdev_priv(dev);
389         void __iomem *mmio = lp->mmio;
390         struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
391
392
393         switch(cmod)
394         {
395                 case RX_INTR_COAL :
396                         timeout = coal_conf->rx_timeout;
397                         event_count = coal_conf->rx_event_count;
398                         if( timeout > MAX_TIMEOUT ||
399                                         event_count > MAX_EVENT_COUNT )
400                         return -EINVAL;
401
402                         timeout = timeout * DELAY_TIMER_CONV;
403                         writel(VAL0|STINTEN, mmio+INTEN0);
404                         writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
405                                                         mmio+DLY_INT_A);
406                         break;
407
408                 case TX_INTR_COAL :
409                         timeout = coal_conf->tx_timeout;
410                         event_count = coal_conf->tx_event_count;
411                         if( timeout > MAX_TIMEOUT ||
412                                         event_count > MAX_EVENT_COUNT )
413                         return -EINVAL;
414
415
416                         timeout = timeout * DELAY_TIMER_CONV;
417                         writel(VAL0|STINTEN,mmio+INTEN0);
418                         writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
419                                                          mmio+DLY_INT_B);
420                         break;
421
422                 case DISABLE_COAL:
423                         writel(0,mmio+STVAL);
424                         writel(STINTEN, mmio+INTEN0);
425                         writel(0, mmio +DLY_INT_B);
426                         writel(0, mmio+DLY_INT_A);
427                         break;
428                  case ENABLE_COAL:
429                        /* Start the timer */
430                         writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /*  0.5 sec */
431                         writel(VAL0|STINTEN, mmio+INTEN0);
432                         break;
433                 default:
434                         break;
435
436    }
437         return 0;
438
439 }
440
441 /*
442 This function initializes the device registers  and starts the device.
443 */
444 static int amd8111e_restart(struct net_device *dev)
445 {
446         struct amd8111e_priv *lp = netdev_priv(dev);
447         void __iomem *mmio = lp->mmio;
448         int i,reg_val;
449
450         /* stop the chip */
451          writel(RUN, mmio + CMD0);
452
453         if(amd8111e_init_ring(dev))
454                 return -ENOMEM;
455
456         /* enable the port manager and set auto negotiation always */
457         writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
458         writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
459
460         amd8111e_set_ext_phy(dev);
461
462         /* set control registers */
463         reg_val = readl(mmio + CTRL1);
464         reg_val &= ~XMTSP_MASK;
465         writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
466
467         /* enable interrupt */
468         writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
469                 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
470                 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
471
472         writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
473
474         /* initialize tx and rx ring base addresses */
475         writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
476         writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
477
478         writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
479         writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
480
481         /* set default IPG to 96 */
482         writew((u32)DEFAULT_IPG,mmio+IPG);
483         writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
484
485         if(lp->options & OPTION_JUMBO_ENABLE){
486                 writel((u32)VAL2|JUMBO, mmio + CMD3);
487                 /* Reset REX_UFLO */
488                 writel( REX_UFLO, mmio + CMD2);
489                 /* Should not set REX_UFLO for jumbo frames */
490                 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
491         }else{
492                 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
493                 writel((u32)JUMBO, mmio + CMD3);
494         }
495
496 #if AMD8111E_VLAN_TAG_USED
497         writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
498 #endif
499         writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
500
501         /* Setting the MAC address to the device */
502         for(i = 0; i < ETH_ADDR_LEN; i++)
503                 writeb( dev->dev_addr[i], mmio + PADR + i );
504
505         /* Enable interrupt coalesce */
506         if(lp->options & OPTION_INTR_COAL_ENABLE){
507                 printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n",
508                                                                 dev->name);
509                 amd8111e_set_coalesce(dev,ENABLE_COAL);
510         }
511
512         /* set RUN bit to start the chip */
513         writel(VAL2 | RDMD0, mmio + CMD0);
514         writel(VAL0 | INTREN | RUN, mmio + CMD0);
515
516         /* To avoid PCI posting bug */
517         readl(mmio+CMD0);
518         return 0;
519 }
520 /*
521 This function clears necessary the device registers.
522 */
523 static void amd8111e_init_hw_default( struct amd8111e_priv* lp)
524 {
525         unsigned int reg_val;
526         unsigned int logic_filter[2] ={0,};
527         void __iomem *mmio = lp->mmio;
528
529
530         /* stop the chip */
531         writel(RUN, mmio + CMD0);
532
533         /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
534         writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
535
536         /* Clear RCV_RING_BASE_ADDR */
537         writel(0, mmio + RCV_RING_BASE_ADDR0);
538
539         /* Clear XMT_RING_BASE_ADDR */
540         writel(0, mmio + XMT_RING_BASE_ADDR0);
541         writel(0, mmio + XMT_RING_BASE_ADDR1);
542         writel(0, mmio + XMT_RING_BASE_ADDR2);
543         writel(0, mmio + XMT_RING_BASE_ADDR3);
544
545         /* Clear CMD0  */
546         writel(CMD0_CLEAR,mmio + CMD0);
547
548         /* Clear CMD2 */
549         writel(CMD2_CLEAR, mmio +CMD2);
550
551         /* Clear CMD7 */
552         writel(CMD7_CLEAR , mmio + CMD7);
553
554         /* Clear DLY_INT_A and DLY_INT_B */
555         writel(0x0, mmio + DLY_INT_A);
556         writel(0x0, mmio + DLY_INT_B);
557
558         /* Clear FLOW_CONTROL */
559         writel(0x0, mmio + FLOW_CONTROL);
560
561         /* Clear INT0  write 1 to clear register */
562         reg_val = readl(mmio + INT0);
563         writel(reg_val, mmio + INT0);
564
565         /* Clear STVAL */
566         writel(0x0, mmio + STVAL);
567
568         /* Clear INTEN0 */
569         writel( INTEN0_CLEAR, mmio + INTEN0);
570
571         /* Clear LADRF */
572         writel(0x0 , mmio + LADRF);
573
574         /* Set SRAM_SIZE & SRAM_BOUNDARY registers  */
575         writel( 0x80010,mmio + SRAM_SIZE);
576
577         /* Clear RCV_RING0_LEN */
578         writel(0x0, mmio +  RCV_RING_LEN0);
579
580         /* Clear XMT_RING0/1/2/3_LEN */
581         writel(0x0, mmio +  XMT_RING_LEN0);
582         writel(0x0, mmio +  XMT_RING_LEN1);
583         writel(0x0, mmio +  XMT_RING_LEN2);
584         writel(0x0, mmio +  XMT_RING_LEN3);
585
586         /* Clear XMT_RING_LIMIT */
587         writel(0x0, mmio + XMT_RING_LIMIT);
588
589         /* Clear MIB */
590         writew(MIB_CLEAR, mmio + MIB_ADDR);
591
592         /* Clear LARF */
593         amd8111e_writeq(*(u64*)logic_filter,mmio+LADRF);
594
595         /* SRAM_SIZE register */
596         reg_val = readl(mmio + SRAM_SIZE);
597
598         if(lp->options & OPTION_JUMBO_ENABLE)
599                 writel( VAL2|JUMBO, mmio + CMD3);
600 #if AMD8111E_VLAN_TAG_USED
601         writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
602 #endif
603         /* Set default value to CTRL1 Register */
604         writel(CTRL1_DEFAULT, mmio + CTRL1);
605
606         /* To avoid PCI posting bug */
607         readl(mmio + CMD2);
608
609 }
610
611 /*
612 This function disables the interrupt and clears all the pending
613 interrupts in INT0
614  */
615 static void amd8111e_disable_interrupt(struct amd8111e_priv* lp)
616 {
617         u32 intr0;
618
619         /* Disable interrupt */
620         writel(INTREN, lp->mmio + CMD0);
621
622         /* Clear INT0 */
623         intr0 = readl(lp->mmio + INT0);
624         writel(intr0, lp->mmio + INT0);
625
626         /* To avoid PCI posting bug */
627         readl(lp->mmio + INT0);
628
629 }
630
631 /*
632 This function stops the chip.
633 */
634 static void amd8111e_stop_chip(struct amd8111e_priv* lp)
635 {
636         writel(RUN, lp->mmio + CMD0);
637
638         /* To avoid PCI posting bug */
639         readl(lp->mmio + CMD0);
640 }
641
642 /*
643 This function frees the  transmiter and receiver descriptor rings.
644 */
645 static void amd8111e_free_ring(struct amd8111e_priv* lp)
646 {
647
648         /* Free transmit and receive skbs */
649         amd8111e_free_skbs(lp->amd8111e_net_dev);
650
651         /* Free transmit and receive descriptor rings */
652         if(lp->rx_ring){
653                 pci_free_consistent(lp->pci_dev,
654                         sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
655                         lp->rx_ring, lp->rx_ring_dma_addr);
656                 lp->rx_ring = NULL;
657         }
658
659         if(lp->tx_ring){
660                 pci_free_consistent(lp->pci_dev,
661                         sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
662                         lp->tx_ring, lp->tx_ring_dma_addr);
663
664                 lp->tx_ring = NULL;
665         }
666
667 }
668 #if AMD8111E_VLAN_TAG_USED
669 /*
670 This is the receive indication function for packets with vlan tag.
671 */
672 static int amd8111e_vlan_rx(struct amd8111e_priv *lp, struct sk_buff *skb, u16 vlan_tag)
673 {
674         return vlan_hwaccel_receive_skb(skb, lp->vlgrp,vlan_tag);
675 }
676 #endif
677
678 /*
679 This function will free all the transmit skbs that are actually transmitted by the device. It will check the ownership of the skb before freeing the skb.
680 */
681 static int amd8111e_tx(struct net_device *dev)
682 {
683         struct amd8111e_priv* lp = netdev_priv(dev);
684         int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
685         int status;
686         /* Complete all the transmit packet */
687         while (lp->tx_complete_idx != lp->tx_idx){
688                 tx_index =  lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
689                 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
690
691                 if(status & OWN_BIT)
692                         break;  /* It still hasn't been Txed */
693
694                 lp->tx_ring[tx_index].buff_phy_addr = 0;
695
696                 /* We must free the original skb */
697                 if (lp->tx_skbuff[tx_index]) {
698                         pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
699                                         lp->tx_skbuff[tx_index]->len,
700                                         PCI_DMA_TODEVICE);
701                         dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
702                         lp->tx_skbuff[tx_index] = NULL;
703                         lp->tx_dma_addr[tx_index] = 0;
704                 }
705                 lp->tx_complete_idx++;
706                 /*COAL update tx coalescing parameters */
707                 lp->coal_conf.tx_packets++;
708                 lp->coal_conf.tx_bytes +=
709                         le16_to_cpu(lp->tx_ring[tx_index].buff_count);
710
711                 if (netif_queue_stopped(dev) &&
712                         lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
713                         /* The ring is no longer full, clear tbusy. */
714                         /* lp->tx_full = 0; */
715                         netif_wake_queue (dev);
716                 }
717         }
718         return 0;
719 }
720
721 /* This function handles the driver receive operation in polling mode */
722 static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
723 {
724         struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
725         struct net_device *dev = lp->amd8111e_net_dev;
726         int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
727         void __iomem *mmio = lp->mmio;
728         struct sk_buff *skb,*new_skb;
729         int min_pkt_len, status;
730         unsigned int intr0;
731         int num_rx_pkt = 0;
732         short pkt_len;
733 #if AMD8111E_VLAN_TAG_USED
734         short vtag;
735 #endif
736         int rx_pkt_limit = budget;
737         unsigned long flags;
738
739         do{
740                 /* process receive packets until we use the quota*/
741                 /* If we own the next entry, it's a new packet. Send it up. */
742                 while(1) {
743                         status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
744                         if (status & OWN_BIT)
745                                 break;
746
747                         /*
748                          * There is a tricky error noted by John Murphy,
749                          * <murf@perftech.com> to Russ Nelson: Even with
750                          * full-sized * buffers it's possible for a
751                          * jabber packet to use two buffers, with only
752                          * the last correctly noting the error.
753                          */
754
755                         if(status & ERR_BIT) {
756                                 /* reseting flags */
757                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
758                                 goto err_next_pkt;
759                         }
760                         /* check for STP and ENP */
761                         if(!((status & STP_BIT) && (status & ENP_BIT))){
762                                 /* reseting flags */
763                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
764                                 goto err_next_pkt;
765                         }
766                         pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
767
768 #if AMD8111E_VLAN_TAG_USED
769                         vtag = status & TT_MASK;
770                         /*MAC will strip vlan tag*/
771                         if(lp->vlgrp != NULL && vtag !=0)
772                                 min_pkt_len =MIN_PKT_LEN - 4;
773                         else
774 #endif
775                                 min_pkt_len =MIN_PKT_LEN;
776
777                         if (pkt_len < min_pkt_len) {
778                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
779                                 lp->drv_rx_errors++;
780                                 goto err_next_pkt;
781                         }
782                         if(--rx_pkt_limit < 0)
783                                 goto rx_not_empty;
784                         if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){
785                                 /* if allocation fail,
786                                    ignore that pkt and go to next one */
787                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
788                                 lp->drv_rx_errors++;
789                                 goto err_next_pkt;
790                         }
791
792                         skb_reserve(new_skb, 2);
793                         skb = lp->rx_skbuff[rx_index];
794                         pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
795                                          lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
796                         skb_put(skb, pkt_len);
797                         lp->rx_skbuff[rx_index] = new_skb;
798                         lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
799                                                                    new_skb->data,
800                                                                    lp->rx_buff_len-2,
801                                                                    PCI_DMA_FROMDEVICE);
802
803                         skb->protocol = eth_type_trans(skb, dev);
804
805 #if AMD8111E_VLAN_TAG_USED
806                         if(lp->vlgrp != NULL && (vtag == TT_VLAN_TAGGED)){
807                                 amd8111e_vlan_rx(lp, skb,
808                                          le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info));
809                         } else
810 #endif
811                                 netif_receive_skb(skb);
812                         /*COAL update rx coalescing parameters*/
813                         lp->coal_conf.rx_packets++;
814                         lp->coal_conf.rx_bytes += pkt_len;
815                         num_rx_pkt++;
816                         dev->last_rx = jiffies;
817
818                 err_next_pkt:
819                         lp->rx_ring[rx_index].buff_phy_addr
820                                 = cpu_to_le32(lp->rx_dma_addr[rx_index]);
821                         lp->rx_ring[rx_index].buff_count =
822                                 cpu_to_le16(lp->rx_buff_len-2);
823                         wmb();
824                         lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
825                         rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
826                 }
827                 /* Check the interrupt status register for more packets in the
828                    mean time. Process them since we have not used up our quota.*/
829
830                 intr0 = readl(mmio + INT0);
831                 /*Ack receive packets */
832                 writel(intr0 & RINT0,mmio + INT0);
833
834         } while(intr0 & RINT0);
835
836         /* Receive descriptor is empty now */
837         spin_lock_irqsave(&lp->lock, flags);
838         __netif_rx_complete(dev, napi);
839         writel(VAL0|RINTEN0, mmio + INTEN0);
840         writel(VAL2 | RDMD0, mmio + CMD0);
841         spin_unlock_irqrestore(&lp->lock, flags);
842
843 rx_not_empty:
844         return num_rx_pkt;
845 }
846
847 /*
848 This function will indicate the link status to the kernel.
849 */
850 static int amd8111e_link_change(struct net_device* dev)
851 {
852         struct amd8111e_priv *lp = netdev_priv(dev);
853         int status0,speed;
854
855         /* read the link change */
856         status0 = readl(lp->mmio + STAT0);
857
858         if(status0 & LINK_STATS){
859                 if(status0 & AUTONEG_COMPLETE)
860                         lp->link_config.autoneg = AUTONEG_ENABLE;
861                 else
862                         lp->link_config.autoneg = AUTONEG_DISABLE;
863
864                 if(status0 & FULL_DPLX)
865                         lp->link_config.duplex = DUPLEX_FULL;
866                 else
867                         lp->link_config.duplex = DUPLEX_HALF;
868                 speed = (status0 & SPEED_MASK) >> 7;
869                 if(speed == PHY_SPEED_10)
870                         lp->link_config.speed = SPEED_10;
871                 else if(speed == PHY_SPEED_100)
872                         lp->link_config.speed = SPEED_100;
873
874                 printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n",                        dev->name,
875                        (lp->link_config.speed == SPEED_100) ? "100": "10",
876                        (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half");
877                 netif_carrier_on(dev);
878         }
879         else{
880                 lp->link_config.speed = SPEED_INVALID;
881                 lp->link_config.duplex = DUPLEX_INVALID;
882                 lp->link_config.autoneg = AUTONEG_INVALID;
883                 printk(KERN_INFO "%s: Link is Down.\n",dev->name);
884                 netif_carrier_off(dev);
885         }
886
887         return 0;
888 }
889 /*
890 This function reads the mib counters.
891 */
892 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
893 {
894         unsigned int  status;
895         unsigned  int data;
896         unsigned int repeat = REPEAT_CNT;
897
898         writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
899         do {
900                 status = readw(mmio + MIB_ADDR);
901                 udelay(2);      /* controller takes MAX 2 us to get mib data */
902         }
903         while (--repeat && (status & MIB_CMD_ACTIVE));
904
905         data = readl(mmio + MIB_DATA);
906         return data;
907 }
908
909 /*
910 This function reads the mib registers and returns the hardware statistics. It  updates previous internal driver statistics with new values.
911 */
912 static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
913 {
914         struct amd8111e_priv *lp = netdev_priv(dev);
915         void __iomem *mmio = lp->mmio;
916         unsigned long flags;
917         /* struct net_device_stats *prev_stats = &lp->prev_stats; */
918         struct net_device_stats* new_stats = &lp->stats;
919
920         if(!lp->opened)
921                 return &lp->stats;
922         spin_lock_irqsave (&lp->lock, flags);
923
924         /* stats.rx_packets */
925         new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
926                                 amd8111e_read_mib(mmio, rcv_multicast_pkts)+
927                                 amd8111e_read_mib(mmio, rcv_unicast_pkts);
928
929         /* stats.tx_packets */
930         new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
931
932         /*stats.rx_bytes */
933         new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
934
935         /* stats.tx_bytes */
936         new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
937
938         /* stats.rx_errors */
939         /* hw errors + errors driver reported */
940         new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
941                                 amd8111e_read_mib(mmio, rcv_fragments)+
942                                 amd8111e_read_mib(mmio, rcv_jabbers)+
943                                 amd8111e_read_mib(mmio, rcv_alignment_errors)+
944                                 amd8111e_read_mib(mmio, rcv_fcs_errors)+
945                                 amd8111e_read_mib(mmio, rcv_miss_pkts)+
946                                 lp->drv_rx_errors;
947
948         /* stats.tx_errors */
949         new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
950
951         /* stats.rx_dropped*/
952         new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
953
954         /* stats.tx_dropped*/
955         new_stats->tx_dropped = amd8111e_read_mib(mmio,  xmt_underrun_pkts);
956
957         /* stats.multicast*/
958         new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
959
960         /* stats.collisions*/
961         new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
962
963         /* stats.rx_length_errors*/
964         new_stats->rx_length_errors =
965                 amd8111e_read_mib(mmio, rcv_undersize_pkts)+
966                 amd8111e_read_mib(mmio, rcv_oversize_pkts);
967
968         /* stats.rx_over_errors*/
969         new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
970
971         /* stats.rx_crc_errors*/
972         new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
973
974         /* stats.rx_frame_errors*/
975         new_stats->rx_frame_errors =
976                 amd8111e_read_mib(mmio, rcv_alignment_errors);
977
978         /* stats.rx_fifo_errors */
979         new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
980
981         /* stats.rx_missed_errors */
982         new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
983
984         /* stats.tx_aborted_errors*/
985         new_stats->tx_aborted_errors =
986                 amd8111e_read_mib(mmio, xmt_excessive_collision);
987
988         /* stats.tx_carrier_errors*/
989         new_stats->tx_carrier_errors =
990                 amd8111e_read_mib(mmio, xmt_loss_carrier);
991
992         /* stats.tx_fifo_errors*/
993         new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
994
995         /* stats.tx_window_errors*/
996         new_stats->tx_window_errors =
997                 amd8111e_read_mib(mmio, xmt_late_collision);
998
999         /* Reset the mibs for collecting new statistics */
1000         /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
1001
1002         spin_unlock_irqrestore (&lp->lock, flags);
1003
1004         return new_stats;
1005 }
1006 /* This function recalculate the interrupt coalescing  mode on every interrupt
1007 according to the datarate and the packet rate.
1008 */
1009 static int amd8111e_calc_coalesce(struct net_device *dev)
1010 {
1011         struct amd8111e_priv *lp = netdev_priv(dev);
1012         struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
1013         int tx_pkt_rate;
1014         int rx_pkt_rate;
1015         int tx_data_rate;
1016         int rx_data_rate;
1017         int rx_pkt_size;
1018         int tx_pkt_size;
1019
1020         tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
1021         coal_conf->tx_prev_packets =  coal_conf->tx_packets;
1022
1023         tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
1024         coal_conf->tx_prev_bytes =  coal_conf->tx_bytes;
1025
1026         rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
1027         coal_conf->rx_prev_packets =  coal_conf->rx_packets;
1028
1029         rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
1030         coal_conf->rx_prev_bytes =  coal_conf->rx_bytes;
1031
1032         if(rx_pkt_rate < 800){
1033                 if(coal_conf->rx_coal_type != NO_COALESCE){
1034
1035                         coal_conf->rx_timeout = 0x0;
1036                         coal_conf->rx_event_count = 0;
1037                         amd8111e_set_coalesce(dev,RX_INTR_COAL);
1038                         coal_conf->rx_coal_type = NO_COALESCE;
1039                 }
1040         }
1041         else{
1042
1043                 rx_pkt_size = rx_data_rate/rx_pkt_rate;
1044                 if (rx_pkt_size < 128){
1045                         if(coal_conf->rx_coal_type != NO_COALESCE){
1046
1047                                 coal_conf->rx_timeout = 0;
1048                                 coal_conf->rx_event_count = 0;
1049                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1050                                 coal_conf->rx_coal_type = NO_COALESCE;
1051                         }
1052
1053                 }
1054                 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
1055
1056                         if(coal_conf->rx_coal_type !=  LOW_COALESCE){
1057                                 coal_conf->rx_timeout = 1;
1058                                 coal_conf->rx_event_count = 4;
1059                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1060                                 coal_conf->rx_coal_type = LOW_COALESCE;
1061                         }
1062                 }
1063                 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1064
1065                         if(coal_conf->rx_coal_type !=  MEDIUM_COALESCE){
1066                                 coal_conf->rx_timeout = 1;
1067                                 coal_conf->rx_event_count = 4;
1068                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1069                                 coal_conf->rx_coal_type = MEDIUM_COALESCE;
1070                         }
1071
1072                 }
1073                 else if(rx_pkt_size >= 1024){
1074                         if(coal_conf->rx_coal_type !=  HIGH_COALESCE){
1075                                 coal_conf->rx_timeout = 2;
1076                                 coal_conf->rx_event_count = 3;
1077                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1078                                 coal_conf->rx_coal_type = HIGH_COALESCE;
1079                         }
1080                 }
1081         }
1082         /* NOW FOR TX INTR COALESC */
1083         if(tx_pkt_rate < 800){
1084                 if(coal_conf->tx_coal_type != NO_COALESCE){
1085
1086                         coal_conf->tx_timeout = 0x0;
1087                         coal_conf->tx_event_count = 0;
1088                         amd8111e_set_coalesce(dev,TX_INTR_COAL);
1089                         coal_conf->tx_coal_type = NO_COALESCE;
1090                 }
1091         }
1092         else{
1093
1094                 tx_pkt_size = tx_data_rate/tx_pkt_rate;
1095                 if (tx_pkt_size < 128){
1096
1097                         if(coal_conf->tx_coal_type != NO_COALESCE){
1098
1099                                 coal_conf->tx_timeout = 0;
1100                                 coal_conf->tx_event_count = 0;
1101                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1102                                 coal_conf->tx_coal_type = NO_COALESCE;
1103                         }
1104
1105                 }
1106                 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1107
1108                         if(coal_conf->tx_coal_type !=  LOW_COALESCE){
1109                                 coal_conf->tx_timeout = 1;
1110                                 coal_conf->tx_event_count = 2;
1111                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1112                                 coal_conf->tx_coal_type = LOW_COALESCE;
1113
1114                         }
1115                 }
1116                 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1117
1118                         if(coal_conf->tx_coal_type !=  MEDIUM_COALESCE){
1119                                 coal_conf->tx_timeout = 2;
1120                                 coal_conf->tx_event_count = 5;
1121                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1122                                 coal_conf->tx_coal_type = MEDIUM_COALESCE;
1123                         }
1124
1125                 }
1126                 else if(tx_pkt_size >= 1024){
1127                         if (tx_pkt_size >= 1024){
1128                                 if(coal_conf->tx_coal_type !=  HIGH_COALESCE){
1129                                         coal_conf->tx_timeout = 4;
1130                                         coal_conf->tx_event_count = 8;
1131                                         amd8111e_set_coalesce(dev,TX_INTR_COAL);
1132                                         coal_conf->tx_coal_type = HIGH_COALESCE;
1133                                 }
1134                         }
1135                 }
1136         }
1137         return 0;
1138
1139 }
1140 /*
1141 This is device interrupt function. It handles transmit, receive,link change and hardware timer interrupts.
1142 */
1143 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
1144 {
1145
1146         struct net_device * dev = (struct net_device *) dev_id;
1147         struct amd8111e_priv *lp = netdev_priv(dev);
1148         void __iomem *mmio = lp->mmio;
1149         unsigned int intr0, intren0;
1150         unsigned int handled = 1;
1151
1152         if(unlikely(dev == NULL))
1153                 return IRQ_NONE;
1154
1155         spin_lock(&lp->lock);
1156
1157         /* disabling interrupt */
1158         writel(INTREN, mmio + CMD0);
1159
1160         /* Read interrupt status */
1161         intr0 = readl(mmio + INT0);
1162         intren0 = readl(mmio + INTEN0);
1163
1164         /* Process all the INT event until INTR bit is clear. */
1165
1166         if (!(intr0 & INTR)){
1167                 handled = 0;
1168                 goto err_no_interrupt;
1169         }
1170
1171         /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1172         writel(intr0, mmio + INT0);
1173
1174         /* Check if Receive Interrupt has occurred. */
1175         if (intr0 & RINT0) {
1176                 if (netif_rx_schedule_prep(dev, &lp->napi)) {
1177                         /* Disable receive interupts */
1178                         writel(RINTEN0, mmio + INTEN0);
1179                         /* Schedule a polling routine */
1180                         __netif_rx_schedule(dev, &lp->napi);
1181                 } else if (intren0 & RINTEN0) {
1182                         printk("************Driver bug! \
1183                                 interrupt while in poll\n");
1184                         /* Fix by disable receive interrupts */
1185                         writel(RINTEN0, mmio + INTEN0);
1186                 }
1187         }
1188
1189         /* Check if  Transmit Interrupt has occurred. */
1190         if (intr0 & TINT0)
1191                 amd8111e_tx(dev);
1192
1193         /* Check if  Link Change Interrupt has occurred. */
1194         if (intr0 & LCINT)
1195                 amd8111e_link_change(dev);
1196
1197         /* Check if Hardware Timer Interrupt has occurred. */
1198         if (intr0 & STINT)
1199                 amd8111e_calc_coalesce(dev);
1200
1201 err_no_interrupt:
1202         writel( VAL0 | INTREN,mmio + CMD0);
1203
1204         spin_unlock(&lp->lock);
1205
1206         return IRQ_RETVAL(handled);
1207 }
1208
1209 #ifdef CONFIG_NET_POLL_CONTROLLER
1210 static void amd8111e_poll(struct net_device *dev)
1211 {
1212         unsigned long flags;
1213         local_irq_save(flags);
1214         amd8111e_interrupt(0, dev);
1215         local_irq_restore(flags);
1216 }
1217 #endif
1218
1219
1220 /*
1221 This function closes the network interface and updates the statistics so that most recent statistics will be available after the interface is down.
1222 */
1223 static int amd8111e_close(struct net_device * dev)
1224 {
1225         struct amd8111e_priv *lp = netdev_priv(dev);
1226         netif_stop_queue(dev);
1227
1228         napi_disable(&lp->napi);
1229
1230         spin_lock_irq(&lp->lock);
1231
1232         amd8111e_disable_interrupt(lp);
1233         amd8111e_stop_chip(lp);
1234         amd8111e_free_ring(lp);
1235
1236         netif_carrier_off(lp->amd8111e_net_dev);
1237
1238         /* Delete ipg timer */
1239         if(lp->options & OPTION_DYN_IPG_ENABLE)
1240                 del_timer_sync(&lp->ipg_data.ipg_timer);
1241
1242         spin_unlock_irq(&lp->lock);
1243         free_irq(dev->irq, dev);
1244
1245         /* Update the statistics before closing */
1246         amd8111e_get_stats(dev);
1247         lp->opened = 0;
1248         return 0;
1249 }
1250 /* This function opens new interface.It requests irq for the device, initializes the device,buffers and descriptors, and starts the device.
1251 */
1252 static int amd8111e_open(struct net_device * dev )
1253 {
1254         struct amd8111e_priv *lp = netdev_priv(dev);
1255
1256         if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1257                                          dev->name, dev))
1258                 return -EAGAIN;
1259
1260         napi_enable(&lp->napi);
1261
1262         spin_lock_irq(&lp->lock);
1263
1264         amd8111e_init_hw_default(lp);
1265
1266         if(amd8111e_restart(dev)){
1267                 spin_unlock_irq(&lp->lock);
1268                 napi_disable(&lp->napi);
1269                 if (dev->irq)
1270                         free_irq(dev->irq, dev);
1271                 return -ENOMEM;
1272         }
1273         /* Start ipg timer */
1274         if(lp->options & OPTION_DYN_IPG_ENABLE){
1275                 add_timer(&lp->ipg_data.ipg_timer);
1276                 printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name);
1277         }
1278
1279         lp->opened = 1;
1280
1281         spin_unlock_irq(&lp->lock);
1282
1283         netif_start_queue(dev);
1284
1285         return 0;
1286 }
1287 /*
1288 This function checks if there is any transmit  descriptors available to queue more packet.
1289 */
1290 static int amd8111e_tx_queue_avail(struct amd8111e_priv* lp )
1291 {
1292         int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1293         if (lp->tx_skbuff[tx_index])
1294                 return -1;
1295         else
1296                 return 0;
1297
1298 }
1299 /*
1300 This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
1301 */
1302
1303 static int amd8111e_start_xmit(struct sk_buff *skb, struct net_device * dev)
1304 {
1305         struct amd8111e_priv *lp = netdev_priv(dev);
1306         int tx_index;
1307         unsigned long flags;
1308
1309         spin_lock_irqsave(&lp->lock, flags);
1310
1311         tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1312
1313         lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1314
1315         lp->tx_skbuff[tx_index] = skb;
1316         lp->tx_ring[tx_index].tx_flags = 0;
1317
1318 #if AMD8111E_VLAN_TAG_USED
1319         if((lp->vlgrp != NULL) && vlan_tx_tag_present(skb)){
1320                 lp->tx_ring[tx_index].tag_ctrl_cmd |=
1321                                 cpu_to_le16(TCC_VLAN_INSERT);
1322                 lp->tx_ring[tx_index].tag_ctrl_info =
1323                                 cpu_to_le16(vlan_tx_tag_get(skb));
1324
1325         }
1326 #endif
1327         lp->tx_dma_addr[tx_index] =
1328             pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1329         lp->tx_ring[tx_index].buff_phy_addr =
1330             cpu_to_le32(lp->tx_dma_addr[tx_index]);
1331
1332         /*  Set FCS and LTINT bits */
1333         wmb();
1334         lp->tx_ring[tx_index].tx_flags |=
1335             cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1336
1337         lp->tx_idx++;
1338
1339         /* Trigger an immediate send poll. */
1340         writel( VAL1 | TDMD0, lp->mmio + CMD0);
1341         writel( VAL2 | RDMD0,lp->mmio + CMD0);
1342
1343         dev->trans_start = jiffies;
1344
1345         if(amd8111e_tx_queue_avail(lp) < 0){
1346                 netif_stop_queue(dev);
1347         }
1348         spin_unlock_irqrestore(&lp->lock, flags);
1349         return 0;
1350 }
1351 /*
1352 This function returns all the memory mapped registers of the device.
1353 */
1354 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1355 {
1356         void __iomem *mmio = lp->mmio;
1357         /* Read only necessary registers */
1358         buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1359         buf[1] = readl(mmio + XMT_RING_LEN0);
1360         buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1361         buf[3] = readl(mmio + RCV_RING_LEN0);
1362         buf[4] = readl(mmio + CMD0);
1363         buf[5] = readl(mmio + CMD2);
1364         buf[6] = readl(mmio + CMD3);
1365         buf[7] = readl(mmio + CMD7);
1366         buf[8] = readl(mmio + INT0);
1367         buf[9] = readl(mmio + INTEN0);
1368         buf[10] = readl(mmio + LADRF);
1369         buf[11] = readl(mmio + LADRF+4);
1370         buf[12] = readl(mmio + STAT0);
1371 }
1372
1373
1374 /*
1375 This function sets promiscuos mode, all-multi mode or the multicast address
1376 list to the device.
1377 */
1378 static void amd8111e_set_multicast_list(struct net_device *dev)
1379 {
1380         struct dev_mc_list* mc_ptr;
1381         struct amd8111e_priv *lp = netdev_priv(dev);
1382         u32 mc_filter[2] ;
1383         int i,bit_num;
1384         if(dev->flags & IFF_PROMISC){
1385                 writel( VAL2 | PROM, lp->mmio + CMD2);
1386                 return;
1387         }
1388         else
1389                 writel( PROM, lp->mmio + CMD2);
1390         if(dev->flags & IFF_ALLMULTI || dev->mc_count > MAX_FILTER_SIZE){
1391                 /* get all multicast packet */
1392                 mc_filter[1] = mc_filter[0] = 0xffffffff;
1393                 lp->mc_list = dev->mc_list;
1394                 lp->options |= OPTION_MULTICAST_ENABLE;
1395                 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1396                 return;
1397         }
1398         if( dev->mc_count == 0 ){
1399                 /* get only own packets */
1400                 mc_filter[1] = mc_filter[0] = 0;
1401                 lp->mc_list = NULL;
1402                 lp->options &= ~OPTION_MULTICAST_ENABLE;
1403                 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1404                 /* disable promiscous mode */
1405                 writel(PROM, lp->mmio + CMD2);
1406                 return;
1407         }
1408         /* load all the multicast addresses in the logic filter */
1409         lp->options |= OPTION_MULTICAST_ENABLE;
1410         lp->mc_list = dev->mc_list;
1411         mc_filter[1] = mc_filter[0] = 0;
1412         for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
1413                      i++, mc_ptr = mc_ptr->next) {
1414                 bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
1415                 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1416         }
1417         amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);
1418
1419         /* To eliminate PCI posting bug */
1420         readl(lp->mmio + CMD2);
1421
1422 }
1423
1424 static void amd8111e_get_drvinfo(struct net_device* dev, struct ethtool_drvinfo *info)
1425 {
1426         struct amd8111e_priv *lp = netdev_priv(dev);
1427         struct pci_dev *pci_dev = lp->pci_dev;
1428         strcpy (info->driver, MODULE_NAME);
1429         strcpy (info->version, MODULE_VERS);
1430         sprintf(info->fw_version,"%u",chip_version);
1431         strcpy (info->bus_info, pci_name(pci_dev));
1432 }
1433
1434 static int amd8111e_get_regs_len(struct net_device *dev)
1435 {
1436         return AMD8111E_REG_DUMP_LEN;
1437 }
1438
1439 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1440 {
1441         struct amd8111e_priv *lp = netdev_priv(dev);
1442         regs->version = 0;
1443         amd8111e_read_regs(lp, buf);
1444 }
1445
1446 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1447 {
1448         struct amd8111e_priv *lp = netdev_priv(dev);
1449         spin_lock_irq(&lp->lock);
1450         mii_ethtool_gset(&lp->mii_if, ecmd);
1451         spin_unlock_irq(&lp->lock);
1452         return 0;
1453 }
1454
1455 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1456 {
1457         struct amd8111e_priv *lp = netdev_priv(dev);
1458         int res;
1459         spin_lock_irq(&lp->lock);
1460         res = mii_ethtool_sset(&lp->mii_if, ecmd);
1461         spin_unlock_irq(&lp->lock);
1462         return res;
1463 }
1464
1465 static int amd8111e_nway_reset(struct net_device *dev)
1466 {
1467         struct amd8111e_priv *lp = netdev_priv(dev);
1468         return mii_nway_restart(&lp->mii_if);
1469 }
1470
1471 static u32 amd8111e_get_link(struct net_device *dev)
1472 {
1473         struct amd8111e_priv *lp = netdev_priv(dev);
1474         return mii_link_ok(&lp->mii_if);
1475 }
1476
1477 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1478 {
1479         struct amd8111e_priv *lp = netdev_priv(dev);
1480         wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1481         if (lp->options & OPTION_WOL_ENABLE)
1482                 wol_info->wolopts = WAKE_MAGIC;
1483 }
1484
1485 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1486 {
1487         struct amd8111e_priv *lp = netdev_priv(dev);
1488         if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1489                 return -EINVAL;
1490         spin_lock_irq(&lp->lock);
1491         if (wol_info->wolopts & WAKE_MAGIC)
1492                 lp->options |=
1493                         (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1494         else if(wol_info->wolopts & WAKE_PHY)
1495                 lp->options |=
1496                         (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1497         else
1498                 lp->options &= ~OPTION_WOL_ENABLE;
1499         spin_unlock_irq(&lp->lock);
1500         return 0;
1501 }
1502
1503 static const struct ethtool_ops ops = {
1504         .get_drvinfo = amd8111e_get_drvinfo,
1505         .get_regs_len = amd8111e_get_regs_len,
1506         .get_regs = amd8111e_get_regs,
1507         .get_settings = amd8111e_get_settings,
1508         .set_settings = amd8111e_set_settings,
1509         .nway_reset = amd8111e_nway_reset,
1510         .get_link = amd8111e_get_link,
1511         .get_wol = amd8111e_get_wol,
1512         .set_wol = amd8111e_set_wol,
1513 };
1514
1515 /*
1516 This function handles all the  ethtool ioctls. It gives driver info, gets/sets driver speed, gets memory mapped register values, forces auto negotiation, sets/gets WOL options for ethtool application.
1517 */
1518
1519 static int amd8111e_ioctl(struct net_device * dev , struct ifreq *ifr, int cmd)
1520 {
1521         struct mii_ioctl_data *data = if_mii(ifr);
1522         struct amd8111e_priv *lp = netdev_priv(dev);
1523         int err;
1524         u32 mii_regval;
1525
1526         if (!capable(CAP_NET_ADMIN))
1527                 return -EPERM;
1528
1529         switch(cmd) {
1530         case SIOCGMIIPHY:
1531                 data->phy_id = lp->ext_phy_addr;
1532
1533         /* fallthru */
1534         case SIOCGMIIREG:
1535
1536                 spin_lock_irq(&lp->lock);
1537                 err = amd8111e_read_phy(lp, data->phy_id,
1538                         data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1539                 spin_unlock_irq(&lp->lock);
1540
1541                 data->val_out = mii_regval;
1542                 return err;
1543
1544         case SIOCSMIIREG:
1545
1546                 spin_lock_irq(&lp->lock);
1547                 err = amd8111e_write_phy(lp, data->phy_id,
1548                         data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1549                 spin_unlock_irq(&lp->lock);
1550
1551                 return err;
1552
1553         default:
1554                 /* do nothing */
1555                 break;
1556         }
1557         return -EOPNOTSUPP;
1558 }
1559 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1560 {
1561         struct amd8111e_priv *lp = netdev_priv(dev);
1562         int i;
1563         struct sockaddr *addr = p;
1564
1565         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1566         spin_lock_irq(&lp->lock);
1567         /* Setting the MAC address to the device */
1568         for(i = 0; i < ETH_ADDR_LEN; i++)
1569                 writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1570
1571         spin_unlock_irq(&lp->lock);
1572
1573         return 0;
1574 }
1575
1576 /*
1577 This function changes the mtu of the device. It restarts the device  to initialize the descriptor with new receive buffers.
1578 */
1579 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1580 {
1581         struct amd8111e_priv *lp = netdev_priv(dev);
1582         int err;
1583
1584         if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
1585                 return -EINVAL;
1586
1587         if (!netif_running(dev)) {
1588                 /* new_mtu will be used
1589                    when device starts netxt time */
1590                 dev->mtu = new_mtu;
1591                 return 0;
1592         }
1593
1594         spin_lock_irq(&lp->lock);
1595
1596         /* stop the chip */
1597         writel(RUN, lp->mmio + CMD0);
1598
1599         dev->mtu = new_mtu;
1600
1601         err = amd8111e_restart(dev);
1602         spin_unlock_irq(&lp->lock);
1603         if(!err)
1604                 netif_start_queue(dev);
1605         return err;
1606 }
1607
1608 #if AMD8111E_VLAN_TAG_USED
1609 static void amd8111e_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1610 {
1611         struct  amd8111e_priv *lp = netdev_priv(dev);
1612         spin_lock_irq(&lp->lock);
1613         lp->vlgrp = grp;
1614         spin_unlock_irq(&lp->lock);
1615 }
1616 #endif
1617
1618 static int amd8111e_enable_magicpkt(struct amd8111e_priv* lp)
1619 {
1620         writel( VAL1|MPPLBA, lp->mmio + CMD3);
1621         writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1622
1623         /* To eliminate PCI posting bug */
1624         readl(lp->mmio + CMD7);
1625         return 0;
1626 }
1627
1628 static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
1629 {
1630
1631         /* Adapter is already stoped/suspended/interrupt-disabled */
1632         writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1633
1634         /* To eliminate PCI posting bug */
1635         readl(lp->mmio + CMD7);
1636         return 0;
1637 }
1638 /* This function is called when a packet transmission fails to complete within a  resonable period, on the assumption that an interrupts have been failed or the  interface is locked up. This function will reinitialize the hardware */
1639
1640 static void amd8111e_tx_timeout(struct net_device *dev)
1641 {
1642         struct amd8111e_priv* lp = netdev_priv(dev);
1643         int err;
1644
1645         printk(KERN_ERR "%s: transmit timed out, resetting\n",
1646                                                       dev->name);
1647         spin_lock_irq(&lp->lock);
1648         err = amd8111e_restart(dev);
1649         spin_unlock_irq(&lp->lock);
1650         if(!err)
1651                 netif_wake_queue(dev);
1652 }
1653 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1654 {
1655         struct net_device *dev = pci_get_drvdata(pci_dev);
1656         struct amd8111e_priv *lp = netdev_priv(dev);
1657
1658         if (!netif_running(dev))
1659                 return 0;
1660
1661         /* disable the interrupt */
1662         spin_lock_irq(&lp->lock);
1663         amd8111e_disable_interrupt(lp);
1664         spin_unlock_irq(&lp->lock);
1665
1666         netif_device_detach(dev);
1667
1668         /* stop chip */
1669         spin_lock_irq(&lp->lock);
1670         if(lp->options & OPTION_DYN_IPG_ENABLE)
1671                 del_timer_sync(&lp->ipg_data.ipg_timer);
1672         amd8111e_stop_chip(lp);
1673         spin_unlock_irq(&lp->lock);
1674
1675         if(lp->options & OPTION_WOL_ENABLE){
1676                  /* enable wol */
1677                 if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1678                         amd8111e_enable_magicpkt(lp);
1679                 if(lp->options & OPTION_WAKE_PHY_ENABLE)
1680                         amd8111e_enable_link_change(lp);
1681
1682                 pci_enable_wake(pci_dev, PCI_D3hot, 1);
1683                 pci_enable_wake(pci_dev, PCI_D3cold, 1);
1684
1685         }
1686         else{
1687                 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1688                 pci_enable_wake(pci_dev, PCI_D3cold, 0);
1689         }
1690
1691         pci_save_state(pci_dev);
1692         pci_set_power_state(pci_dev, PCI_D3hot);
1693
1694         return 0;
1695 }
1696 static int amd8111e_resume(struct pci_dev *pci_dev)
1697 {
1698         struct net_device *dev = pci_get_drvdata(pci_dev);
1699         struct amd8111e_priv *lp = netdev_priv(dev);
1700
1701         if (!netif_running(dev))
1702                 return 0;
1703
1704         pci_set_power_state(pci_dev, PCI_D0);
1705         pci_restore_state(pci_dev);
1706
1707         pci_enable_wake(pci_dev, PCI_D3hot, 0);
1708         pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1709
1710         netif_device_attach(dev);
1711
1712         spin_lock_irq(&lp->lock);
1713         amd8111e_restart(dev);
1714         /* Restart ipg timer */
1715         if(lp->options & OPTION_DYN_IPG_ENABLE)
1716                 mod_timer(&lp->ipg_data.ipg_timer,
1717                                 jiffies + IPG_CONVERGE_JIFFIES);
1718         spin_unlock_irq(&lp->lock);
1719
1720         return 0;
1721 }
1722
1723
1724 static void __devexit amd8111e_remove_one(struct pci_dev *pdev)
1725 {
1726         struct net_device *dev = pci_get_drvdata(pdev);
1727         if (dev) {
1728                 unregister_netdev(dev);
1729                 iounmap(((struct amd8111e_priv *)netdev_priv(dev))->mmio);
1730                 free_netdev(dev);
1731                 pci_release_regions(pdev);
1732                 pci_disable_device(pdev);
1733                 pci_set_drvdata(pdev, NULL);
1734         }
1735 }
1736 static void amd8111e_config_ipg(struct net_device* dev)
1737 {
1738         struct amd8111e_priv *lp = netdev_priv(dev);
1739         struct ipg_info* ipg_data = &lp->ipg_data;
1740         void __iomem *mmio = lp->mmio;
1741         unsigned int prev_col_cnt = ipg_data->col_cnt;
1742         unsigned int total_col_cnt;
1743         unsigned int tmp_ipg;
1744
1745         if(lp->link_config.duplex == DUPLEX_FULL){
1746                 ipg_data->ipg = DEFAULT_IPG;
1747                 return;
1748         }
1749
1750         if(ipg_data->ipg_state == SSTATE){
1751
1752                 if(ipg_data->timer_tick == IPG_STABLE_TIME){
1753
1754                         ipg_data->timer_tick = 0;
1755                         ipg_data->ipg = MIN_IPG - IPG_STEP;
1756                         ipg_data->current_ipg = MIN_IPG;
1757                         ipg_data->diff_col_cnt = 0xFFFFFFFF;
1758                         ipg_data->ipg_state = CSTATE;
1759                 }
1760                 else
1761                         ipg_data->timer_tick++;
1762         }
1763
1764         if(ipg_data->ipg_state == CSTATE){
1765
1766                 /* Get the current collision count */
1767
1768                 total_col_cnt = ipg_data->col_cnt =
1769                                 amd8111e_read_mib(mmio, xmt_collisions);
1770
1771                 if ((total_col_cnt - prev_col_cnt) <
1772                                 (ipg_data->diff_col_cnt)){
1773
1774                         ipg_data->diff_col_cnt =
1775                                 total_col_cnt - prev_col_cnt ;
1776
1777                         ipg_data->ipg = ipg_data->current_ipg;
1778                 }
1779
1780                 ipg_data->current_ipg += IPG_STEP;
1781
1782                 if (ipg_data->current_ipg <= MAX_IPG)
1783                         tmp_ipg = ipg_data->current_ipg;
1784                 else{
1785                         tmp_ipg = ipg_data->ipg;
1786                         ipg_data->ipg_state = SSTATE;
1787                 }
1788                 writew((u32)tmp_ipg, mmio + IPG);
1789                 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1790         }
1791          mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1792         return;
1793
1794 }
1795
1796 static void __devinit amd8111e_probe_ext_phy(struct net_device* dev)
1797 {
1798         struct amd8111e_priv *lp = netdev_priv(dev);
1799         int i;
1800
1801         for (i = 0x1e; i >= 0; i--) {
1802                 u32 id1, id2;
1803
1804                 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1805                         continue;
1806                 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1807                         continue;
1808                 lp->ext_phy_id = (id1 << 16) | id2;
1809                 lp->ext_phy_addr = i;
1810                 return;
1811         }
1812         lp->ext_phy_id = 0;
1813         lp->ext_phy_addr = 1;
1814 }
1815
1816 static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
1817                                   const struct pci_device_id *ent)
1818 {
1819         int err,i,pm_cap;
1820         unsigned long reg_addr,reg_len;
1821         struct amd8111e_priv* lp;
1822         struct net_device* dev;
1823         DECLARE_MAC_BUF(mac);
1824
1825         err = pci_enable_device(pdev);
1826         if(err){
1827                 printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
1828                         "exiting.\n");
1829                 return err;
1830         }
1831
1832         if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1833                 printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
1834                        "exiting.\n");
1835                 err = -ENODEV;
1836                 goto err_disable_pdev;
1837         }
1838
1839         err = pci_request_regions(pdev, MODULE_NAME);
1840         if(err){
1841                 printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, "
1842                        "exiting.\n");
1843                 goto err_disable_pdev;
1844         }
1845
1846         pci_set_master(pdev);
1847
1848         /* Find power-management capability. */
1849         if((pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM))==0){
1850                 printk(KERN_ERR "amd8111e: No Power Management capability, "
1851                        "exiting.\n");
1852                 goto err_free_reg;
1853         }
1854
1855         /* Initialize DMA */
1856         if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) < 0) {
1857                 printk(KERN_ERR "amd8111e: DMA not supported,"
1858                         "exiting.\n");
1859                 goto err_free_reg;
1860         }
1861
1862         reg_addr = pci_resource_start(pdev, 0);
1863         reg_len = pci_resource_len(pdev, 0);
1864
1865         dev = alloc_etherdev(sizeof(struct amd8111e_priv));
1866         if (!dev) {
1867                 printk(KERN_ERR "amd8111e: Etherdev alloc failed, exiting.\n");
1868                 err = -ENOMEM;
1869                 goto err_free_reg;
1870         }
1871
1872         SET_NETDEV_DEV(dev, &pdev->dev);
1873
1874 #if AMD8111E_VLAN_TAG_USED
1875         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX ;
1876         dev->vlan_rx_register =amd8111e_vlan_rx_register;
1877 #endif
1878
1879         lp = netdev_priv(dev);
1880         lp->pci_dev = pdev;
1881         lp->amd8111e_net_dev = dev;
1882         lp->pm_cap = pm_cap;
1883
1884         spin_lock_init(&lp->lock);
1885
1886         lp->mmio = ioremap(reg_addr, reg_len);
1887         if (!lp->mmio) {
1888                 printk(KERN_ERR "amd8111e: Cannot map device registers, "
1889                        "exiting\n");
1890                 err = -ENOMEM;
1891                 goto err_free_dev;
1892         }
1893
1894         /* Initializing MAC address */
1895         for(i = 0; i < ETH_ADDR_LEN; i++)
1896                 dev->dev_addr[i] = readb(lp->mmio + PADR + i);
1897
1898         /* Setting user defined parametrs */
1899         lp->ext_phy_option = speed_duplex[card_idx];
1900         if(coalesce[card_idx])
1901                 lp->options |= OPTION_INTR_COAL_ENABLE;
1902         if(dynamic_ipg[card_idx++])
1903                 lp->options |= OPTION_DYN_IPG_ENABLE;
1904
1905         /* Initialize driver entry points */
1906         dev->open = amd8111e_open;
1907         dev->hard_start_xmit = amd8111e_start_xmit;
1908         dev->stop = amd8111e_close;
1909         dev->get_stats = amd8111e_get_stats;
1910         dev->set_multicast_list = amd8111e_set_multicast_list;
1911         dev->set_mac_address = amd8111e_set_mac_address;
1912         dev->do_ioctl = amd8111e_ioctl;
1913         dev->change_mtu = amd8111e_change_mtu;
1914         SET_ETHTOOL_OPS(dev, &ops);
1915         dev->irq =pdev->irq;
1916         dev->tx_timeout = amd8111e_tx_timeout;
1917         dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
1918         netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
1919 #ifdef CONFIG_NET_POLL_CONTROLLER
1920         dev->poll_controller = amd8111e_poll;
1921 #endif
1922
1923 #if AMD8111E_VLAN_TAG_USED
1924         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
1925         dev->vlan_rx_register =amd8111e_vlan_rx_register;
1926 #endif
1927         /* Probe the external PHY */
1928         amd8111e_probe_ext_phy(dev);
1929
1930         /* setting mii default values */
1931         lp->mii_if.dev = dev;
1932         lp->mii_if.mdio_read = amd8111e_mdio_read;
1933         lp->mii_if.mdio_write = amd8111e_mdio_write;
1934         lp->mii_if.phy_id = lp->ext_phy_addr;
1935
1936         /* Set receive buffer length and set jumbo option*/
1937         amd8111e_set_rx_buff_len(dev);
1938
1939
1940         err = register_netdev(dev);
1941         if (err) {
1942                 printk(KERN_ERR "amd8111e: Cannot register net device, "
1943                        "exiting.\n");
1944                 goto err_iounmap;
1945         }
1946
1947         pci_set_drvdata(pdev, dev);
1948
1949         /* Initialize software ipg timer */
1950         if(lp->options & OPTION_DYN_IPG_ENABLE){
1951                 init_timer(&lp->ipg_data.ipg_timer);
1952                 lp->ipg_data.ipg_timer.data = (unsigned long) dev;
1953                 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
1954                 lp->ipg_data.ipg_timer.expires = jiffies +
1955                                                  IPG_CONVERGE_JIFFIES;
1956                 lp->ipg_data.ipg = DEFAULT_IPG;
1957                 lp->ipg_data.ipg_state = CSTATE;
1958         };
1959
1960         /*  display driver and device information */
1961
1962         chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
1963         printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",
1964                dev->name,MODULE_VERS);
1965         printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %s\n",
1966                dev->name, chip_version, print_mac(mac, dev->dev_addr));
1967         if (lp->ext_phy_id)
1968                 printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
1969                        dev->name, lp->ext_phy_id, lp->ext_phy_addr);
1970         else
1971                 printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n",
1972                        dev->name);
1973         return 0;
1974 err_iounmap:
1975         iounmap(lp->mmio);
1976
1977 err_free_dev:
1978         free_netdev(dev);
1979
1980 err_free_reg:
1981         pci_release_regions(pdev);
1982
1983 err_disable_pdev:
1984         pci_disable_device(pdev);
1985         pci_set_drvdata(pdev, NULL);
1986         return err;
1987
1988 }
1989
1990 static struct pci_driver amd8111e_driver = {
1991         .name           = MODULE_NAME,
1992         .id_table       = amd8111e_pci_tbl,
1993         .probe          = amd8111e_probe_one,
1994         .remove         = __devexit_p(amd8111e_remove_one),
1995         .suspend        = amd8111e_suspend,
1996         .resume         = amd8111e_resume
1997 };
1998
1999 static int __init amd8111e_init(void)
2000 {
2001         return pci_register_driver(&amd8111e_driver);
2002 }
2003
2004 static void __exit amd8111e_cleanup(void)
2005 {
2006         pci_unregister_driver(&amd8111e_driver);
2007 }
2008
2009 module_init(amd8111e_init);
2010 module_exit(amd8111e_cleanup);