git.oblomov.eu Git - linux-2.6/blob - drivers/net/irda/ali-ircc.c

   1 /*********************************************************************
   2  *
   3  * Filename:      ali-ircc.h
   4  * Version:       0.5
   5  * Description:   Driver for the ALI M1535D and M1543C FIR Controller
   6  * Status:        Experimental.
   7  * Author:        Benjamin Kong <benjamin_kong@ali.com.tw>
   8  * Created at:    2000/10/16 03:46PM
   9  * Modified at:   2001/1/3 02:55PM
  10  * Modified by:   Benjamin Kong <benjamin_kong@ali.com.tw>
  11  * Modified at:   2003/11/6 and support for ALi south-bridge chipsets M1563
  12  * Modified by:   Clear Zhang <clear_zhang@ali.com.tw>
  13  *
  14  *     Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
  15  *     All Rights Reserved
  16  *
  17  *     This program is free software; you can redistribute it and/or
  18  *     modify it under the terms of the GNU General Public License as
  19  *     published by the Free Software Foundation; either version 2 of
  20  *     the License, or (at your option) any later version.
  21  *
  22  ********************************************************************/
  23
  24 #include <linux/module.h>
  25
  26 #include <linux/kernel.h>
  27 #include <linux/types.h>
  28 #include <linux/skbuff.h>
  29 #include <linux/netdevice.h>
  30 #include <linux/ioport.h>
  31 #include <linux/delay.h>
  32 #include <linux/slab.h>
  33 #include <linux/init.h>
  34 #include <linux/rtnetlink.h>
  35 #include <linux/serial_reg.h>
  36 #include <linux/dma-mapping.h>
  37 #include <linux/platform_device.h>
  38
  39 #include <asm/io.h>
  40 #include <asm/dma.h>
  41 #include <asm/byteorder.h>
  42
  43 #include <net/irda/wrapper.h>
  44 #include <net/irda/irda.h>
  45 #include <net/irda/irda_device.h>
  46
  47 #include "ali-ircc.h"
  48
  49 #define CHIP_IO_EXTENT 8
  50 #define BROKEN_DONGLE_ID
  51
  52 #define ALI_IRCC_DRIVER_NAME "ali-ircc"
  53
  54 /* Power Management */
  55 static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state);
  56 static int ali_ircc_resume(struct platform_device *dev);
  57
  58 static struct platform_driver ali_ircc_driver = {
  59         .suspend        = ali_ircc_suspend,
  60         .resume         = ali_ircc_resume,
  61         .driver         = {
  62                 .name   = ALI_IRCC_DRIVER_NAME,
  63                 .owner  = THIS_MODULE,
  64         },
  65 };
  66
  67 /* Module parameters */
  68 static int qos_mtt_bits = 0x07;  /* 1 ms or more */
  69
  70 /* Use BIOS settions by default, but user may supply module parameters */
  71 static unsigned int io[]  = { ~0, ~0, ~0, ~0 };
  72 static unsigned int irq[] = { 0, 0, 0, 0 };
  73 static unsigned int dma[] = { 0, 0, 0, 0 };
  74
  75 static int  ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
  76 static int  ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
  77 static int  ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
  78
  79 /* These are the currently known ALi sourth-bridge chipsets, the only one difference
  80  * is that M1543C doesn't support HP HDSL-3600
  81  */
  82 static ali_chip_t chips[] =
  83 {
  84         { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 },
  85         { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 },
  86         { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 },
  87         { NULL }
  88 };
  89
  90 /* Max 4 instances for now */
  91 static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
  92
  93 /* Dongle Types */
  94 static char *dongle_types[] = {
  95         "TFDS6000",
  96         "HP HSDL-3600",
  97         "HP HSDL-1100",
  98         "No dongle connected",
  99 };
 100
 101 /* Some prototypes */
 102 static int  ali_ircc_open(int i, chipio_t *info);
 103
 104 static int  ali_ircc_close(struct ali_ircc_cb *self);
 105
 106 static int  ali_ircc_setup(chipio_t *info);
 107 static int  ali_ircc_is_receiving(struct ali_ircc_cb *self);
 108 static int  ali_ircc_net_open(struct net_device *dev);
 109 static int  ali_ircc_net_close(struct net_device *dev);
 110 static int  ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 111 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
 112
 113 /* SIR function */
 114 static int  ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
 115 static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self);
 116 static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
 117 static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
 118 static int  ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
 119 static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
 120
 121 /* FIR function */
 122 static int  ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
 123 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
 124 static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self);
 125 static int  ali_ircc_dma_receive(struct ali_ircc_cb *self);
 126 static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self);
 127 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self);
 128 static void ali_ircc_dma_xmit(struct ali_ircc_cb *self);
 129
 130 /* My Function */
 131 static int  ali_ircc_read_dongle_id (int i, chipio_t *info);
 132 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed);
 133
 134 /* ALi chip function */
 135 static void SIR2FIR(int iobase);
 136 static void FIR2SIR(int iobase);
 137 static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
 138
 139 /*
 140  * Function ali_ircc_init ()
 141  *
 142  *    Initialize chip. Find out whay kinds of chips we are dealing with
 143  *    and their configuation registers address
 144  */
 145 static int __init ali_ircc_init(void)
 146 {
 147         ali_chip_t *chip;
 148         chipio_t info;
 149         int ret;
 150         int cfg, cfg_base;
 151         int reg, revision;
 152         int i = 0;
 153
 154         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 155
 156         ret = platform_driver_register(&ali_ircc_driver);
 157         if (ret) {
 158                 IRDA_ERROR("%s, Can't register driver!\n",
 159                            ALI_IRCC_DRIVER_NAME);
 160                 return ret;
 161         }
 162
 163         ret = -ENODEV;
 164
 165         /* Probe for all the ALi chipsets we know about */
 166         for (chip= chips; chip->name; chip++, i++)
 167         {
 168                 IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
 169
 170                 /* Try all config registers for this chip */
 171                 for (cfg=0; cfg<2; cfg++)
 172                 {
 173                         cfg_base = chip->cfg[cfg];
 174                         if (!cfg_base)
 175                                 continue;
 176
 177                         memset(&info, 0, sizeof(chipio_t));
 178                         info.cfg_base = cfg_base;
 179                         info.fir_base = io[i];
 180                         info.dma = dma[i];
 181                         info.irq = irq[i];
 182
 183
 184                         /* Enter Configuration */
 185                         outb(chip->entr1, cfg_base);
 186                         outb(chip->entr2, cfg_base);
 187
 188                         /* Select Logical Device 5 Registers (UART2) */
 189                         outb(0x07, cfg_base);
 190                         outb(0x05, cfg_base+1);
 191
 192                         /* Read Chip Identification Register */
 193                         outb(chip->cid_index, cfg_base);
 194                         reg = inb(cfg_base+1);
 195
 196                         if (reg == chip->cid_value)
 197                         {
 198                                 IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
 199
 200                                 outb(0x1F, cfg_base);
 201                                 revision = inb(cfg_base+1);
 202                                 IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
 203                                            chip->name, revision);
 204
 205                                 /*
 206                                  * If the user supplies the base address, then
 207                                  * we init the chip, if not we probe the values
 208                                  * set by the BIOS
 209                                  */
 210                                 if (io[i] < 2000)
 211                                 {
 212                                         chip->init(chip, &info);
 213                                 }
 214                                 else
 215                                 {
 216                                         chip->probe(chip, &info);
 217                                 }
 218
 219                                 if (ali_ircc_open(i, &info) == 0)
 220                                         ret = 0;
 221                                 i++;
 222                         }
 223                         else
 224                         {
 225                                 IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
 226                         }
 227                         /* Exit configuration */
 228                         outb(0xbb, cfg_base);
 229                 }
 230         }
 231
 232         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 233
 234         if (ret)
 235                 platform_driver_unregister(&ali_ircc_driver);
 236
 237         return ret;
 238 }
 239
 240 /*
 241  * Function ali_ircc_cleanup ()
 242  *
 243  *    Close all configured chips
 244  *
 245  */
 246 static void __exit ali_ircc_cleanup(void)
 247 {
 248         int i;
 249
 250         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 251
 252         for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 253                 if (dev_self[i])
 254                         ali_ircc_close(dev_self[i]);
 255         }
 256
 257         platform_driver_unregister(&ali_ircc_driver);
 258
 259         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 260 }
 261
 262 /*
 263  * Function ali_ircc_open (int i, chipio_t *inf)
 264  *
 265  *    Open driver instance
 266  *
 267  */
 268 static int ali_ircc_open(int i, chipio_t *info)
 269 {
 270         struct net_device *dev;
 271         struct ali_ircc_cb *self;
 272         int dongle_id;
 273         int err;
 274
 275         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 276
 277         if (i >= ARRAY_SIZE(dev_self)) {
 278                 IRDA_ERROR("%s(), maximum number of supported chips reached!\n",
 279                            __func__);
 280                 return -ENOMEM;
 281         }
 282
 283         /* Set FIR FIFO and DMA Threshold */
 284         if ((ali_ircc_setup(info)) == -1)
 285                 return -1;
 286
 287         dev = alloc_irdadev(sizeof(*self));
 288         if (dev == NULL) {
 289                 IRDA_ERROR("%s(), can't allocate memory for control block!\n",
 290                            __func__);
 291                 return -ENOMEM;
 292         }
 293
 294         self = netdev_priv(dev);
 295         self->netdev = dev;
 296         spin_lock_init(&self->lock);
 297
 298         /* Need to store self somewhere */
 299         dev_self[i] = self;
 300         self->index = i;
 301
 302         /* Initialize IO */
 303         self->io.cfg_base  = info->cfg_base;    /* In ali_ircc_probe_53 assign          */
 304         self->io.fir_base  = info->fir_base;    /* info->sir_base = info->fir_base      */
 305         self->io.sir_base  = info->sir_base;    /* ALi SIR and FIR use the same address */
 306         self->io.irq       = info->irq;
 307         self->io.fir_ext   = CHIP_IO_EXTENT;
 308         self->io.dma       = info->dma;
 309         self->io.fifo_size = 16;                /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */
 310
 311         /* Reserve the ioports that we need */
 312         if (!request_region(self->io.fir_base, self->io.fir_ext,
 313                             ALI_IRCC_DRIVER_NAME)) {
 314                 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__,
 315                         self->io.fir_base);
 316                 err = -ENODEV;
 317                 goto err_out1;
 318         }
 319
 320         /* Initialize QoS for this device */
 321         irda_init_max_qos_capabilies(&self->qos);
 322
 323         /* The only value we must override it the baudrate */
 324         self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
 325                 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM
 326
 327         self->qos.min_turn_time.bits = qos_mtt_bits;
 328
 329         irda_qos_bits_to_value(&self->qos);
 330
 331         /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
 332         self->rx_buff.truesize = 14384;
 333         self->tx_buff.truesize = 14384;
 334
 335         /* Allocate memory if needed */
 336         self->rx_buff.head =
 337                 dma_alloc_coherent(NULL, self->rx_buff.truesize,
 338                                    &self->rx_buff_dma, GFP_KERNEL);
 339         if (self->rx_buff.head == NULL) {
 340                 err = -ENOMEM;
 341                 goto err_out2;
 342         }
 343         memset(self->rx_buff.head, 0, self->rx_buff.truesize);
 344
 345         self->tx_buff.head =
 346                 dma_alloc_coherent(NULL, self->tx_buff.truesize,
 347                                    &self->tx_buff_dma, GFP_KERNEL);
 348         if (self->tx_buff.head == NULL) {
 349                 err = -ENOMEM;
 350                 goto err_out3;
 351         }
 352         memset(self->tx_buff.head, 0, self->tx_buff.truesize);
 353
 354         self->rx_buff.in_frame = FALSE;
 355         self->rx_buff.state = OUTSIDE_FRAME;
 356         self->tx_buff.data = self->tx_buff.head;
 357         self->rx_buff.data = self->rx_buff.head;
 358
 359         /* Reset Tx queue info */
 360         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 361         self->tx_fifo.tail = self->tx_buff.head;
 362
 363         /* Override the network functions we need to use */
 364         dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
 365         dev->open            = ali_ircc_net_open;
 366         dev->stop            = ali_ircc_net_close;
 367         dev->do_ioctl        = ali_ircc_net_ioctl;
 368
 369         err = register_netdev(dev);
 370         if (err) {
 371                 IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
 372                 goto err_out4;
 373         }
 374         IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
 375
 376         /* Check dongle id */
 377         dongle_id = ali_ircc_read_dongle_id(i, info);
 378         IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__,
 379                      ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]);
 380
 381         self->io.dongle_id = dongle_id;
 382
 383         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 384
 385         return 0;
 386
 387  err_out4:
 388         dma_free_coherent(NULL, self->tx_buff.truesize,
 389                           self->tx_buff.head, self->tx_buff_dma);
 390  err_out3:
 391         dma_free_coherent(NULL, self->rx_buff.truesize,
 392                           self->rx_buff.head, self->rx_buff_dma);
 393  err_out2:
 394         release_region(self->io.fir_base, self->io.fir_ext);
 395  err_out1:
 396         dev_self[i] = NULL;
 397         free_netdev(dev);
 398         return err;
 399 }
 400
 401
 402 /*
 403  * Function ali_ircc_close (self)
 404  *
 405  *    Close driver instance
 406  *
 407  */
 408 static int __exit ali_ircc_close(struct ali_ircc_cb *self)
 409 {
 410         int iobase;
 411
 412         IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
 413
 414         IRDA_ASSERT(self != NULL, return -1;);
 415
 416         iobase = self->io.fir_base;
 417
 418         /* Remove netdevice */
 419         unregister_netdev(self->netdev);
 420
 421         /* Release the PORT that this driver is using */
 422         IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
 423         release_region(self->io.fir_base, self->io.fir_ext);
 424
 425         if (self->tx_buff.head)
 426                 dma_free_coherent(NULL, self->tx_buff.truesize,
 427                                   self->tx_buff.head, self->tx_buff_dma);
 428
 429         if (self->rx_buff.head)
 430                 dma_free_coherent(NULL, self->rx_buff.truesize,
 431                                   self->rx_buff.head, self->rx_buff_dma);
 432
 433         dev_self[self->index] = NULL;
 434         free_netdev(self->netdev);
 435
 436         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 437
 438         return 0;
 439 }
 440
 441 /*
 442  * Function ali_ircc_init_43 (chip, info)
 443  *
 444  *    Initialize the ALi M1543 chip.
 445  */
 446 static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info)
 447 {
 448         /* All controller information like I/O address, DMA channel, IRQ
 449          * are set by BIOS
 450          */
 451
 452         return 0;
 453 }
 454
 455 /*
 456  * Function ali_ircc_init_53 (chip, info)
 457  *
 458  *    Initialize the ALi M1535 chip.
 459  */
 460 static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info)
 461 {
 462         /* All controller information like I/O address, DMA channel, IRQ
 463          * are set by BIOS
 464          */
 465
 466         return 0;
 467 }
 468
 469 /*
 470  * Function ali_ircc_probe_53 (chip, info)
 471  *
 472  *      Probes for the ALi M1535D or M1535
 473  */
 474 static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
 475 {
 476         int cfg_base = info->cfg_base;
 477         int hi, low, reg;
 478
 479         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 480
 481         /* Enter Configuration */
 482         outb(chip->entr1, cfg_base);
 483         outb(chip->entr2, cfg_base);
 484
 485         /* Select Logical Device 5 Registers (UART2) */
 486         outb(0x07, cfg_base);
 487         outb(0x05, cfg_base+1);
 488
 489         /* Read address control register */
 490         outb(0x60, cfg_base);
 491         hi = inb(cfg_base+1);
 492         outb(0x61, cfg_base);
 493         low = inb(cfg_base+1);
 494         info->fir_base = (hi<<8) + low;
 495
 496         info->sir_base = info->fir_base;
 497
 498         IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
 499
 500         /* Read IRQ control register */
 501         outb(0x70, cfg_base);
 502         reg = inb(cfg_base+1);
 503         info->irq = reg & 0x0f;
 504         IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
 505
 506         /* Read DMA channel */
 507         outb(0x74, cfg_base);
 508         reg = inb(cfg_base+1);
 509         info->dma = reg & 0x07;
 510
 511         if(info->dma == 0x04)
 512                 IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__);
 513         else
 514                 IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
 515
 516         /* Read Enabled Status */
 517         outb(0x30, cfg_base);
 518         reg = inb(cfg_base+1);
 519         info->enabled = (reg & 0x80) && (reg & 0x01);
 520         IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
 521
 522         /* Read Power Status */
 523         outb(0x22, cfg_base);
 524         reg = inb(cfg_base+1);
 525         info->suspended = (reg & 0x20);
 526         IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
 527
 528         /* Exit configuration */
 529         outb(0xbb, cfg_base);
 530
 531         IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 532
 533         return 0;
 534 }
 535
 536 /*
 537  * Function ali_ircc_setup (info)
 538  *
 539  *      Set FIR FIFO and DMA Threshold
 540  *      Returns non-negative on success.
 541  *
 542  */
 543 static int ali_ircc_setup(chipio_t *info)
 544 {
 545         unsigned char tmp;
 546         int version;
 547         int iobase = info->fir_base;
 548
 549         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 550
 551         /* Locking comments :
 552          * Most operations here need to be protected. We are called before
 553          * the device instance is created in ali_ircc_open(), therefore
 554          * nobody can bother us - Jean II */
 555
 556         /* Switch to FIR space */
 557         SIR2FIR(iobase);
 558
 559         /* Master Reset */
 560         outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM
 561
 562         /* Read FIR ID Version Register */
 563         switch_bank(iobase, BANK3);
 564         version = inb(iobase+FIR_ID_VR);
 565
 566         /* Should be 0x00 in the M1535/M1535D */
 567         if(version != 0x00)
 568         {
 569                 IRDA_ERROR("%s, Wrong chip version %02x\n",
 570                            ALI_IRCC_DRIVER_NAME, version);
 571                 return -1;
 572         }
 573
 574         /* Set FIR FIFO Threshold Register */
 575         switch_bank(iobase, BANK1);
 576         outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
 577
 578         /* Set FIR DMA Threshold Register */
 579         outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
 580
 581         /* CRC enable */
 582         switch_bank(iobase, BANK2);
 583         outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR);
 584
 585         /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/
 586
 587         /* Switch to Bank 0 */
 588         switch_bank(iobase, BANK0);
 589
 590         tmp = inb(iobase+FIR_LCR_B);
 591         tmp &=~0x20; // disable SIP
 592         tmp |= 0x80; // these two steps make RX mode
 593         tmp &= 0xbf;
 594         outb(tmp, iobase+FIR_LCR_B);
 595
 596         /* Disable Interrupt */
 597         outb(0x00, iobase+FIR_IER);
 598
 599
 600         /* Switch to SIR space */
 601         FIR2SIR(iobase);
 602
 603         IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n",
 604                      ALI_IRCC_DRIVER_NAME);
 605
 606         /* Enable receive interrupts */
 607         // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
 608         // Turn on the interrupts in ali_ircc_net_open
 609
 610         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 611
 612         return 0;
 613 }
 614
 615 /*
 616  * Function ali_ircc_read_dongle_id (int index, info)
 617  *
 618  * Try to read dongle indentification. This procedure needs to be executed
 619  * once after power-on/reset. It also needs to be used whenever you suspect
 620  * that the user may have plugged/unplugged the IrDA Dongle.
 621  */
 622 static int ali_ircc_read_dongle_id (int i, chipio_t *info)
 623 {
 624         int dongle_id, reg;
 625         int cfg_base = info->cfg_base;
 626
 627         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 628
 629         /* Enter Configuration */
 630         outb(chips[i].entr1, cfg_base);
 631         outb(chips[i].entr2, cfg_base);
 632
 633         /* Select Logical Device 5 Registers (UART2) */
 634         outb(0x07, cfg_base);
 635         outb(0x05, cfg_base+1);
 636
 637         /* Read Dongle ID */
 638         outb(0xf0, cfg_base);
 639         reg = inb(cfg_base+1);
 640         dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
 641         IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
 642                 dongle_id, dongle_types[dongle_id]);
 643
 644         /* Exit configuration */
 645         outb(0xbb, cfg_base);
 646
 647         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 648
 649         return dongle_id;
 650 }
 651
 652 /*
 653  * Function ali_ircc_interrupt (irq, dev_id, regs)
 654  *
 655  *    An interrupt from the chip has arrived. Time to do some work
 656  *
 657  */
 658 static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
 659 {
 660         struct net_device *dev = dev_id;
 661         struct ali_ircc_cb *self;
 662         int ret;
 663
 664         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 665
 666         self = netdev_priv(dev);
 667
 668         spin_lock(&self->lock);
 669
 670         /* Dispatch interrupt handler for the current speed */
 671         if (self->io.speed > 115200)
 672                 ret = ali_ircc_fir_interrupt(self);
 673         else
 674                 ret = ali_ircc_sir_interrupt(self);
 675
 676         spin_unlock(&self->lock);
 677
 678         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 679         return ret;
 680 }
 681 /*
 682  * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self)
 683  *
 684  *    Handle MIR/FIR interrupt
 685  *
 686  */
 687 static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
 688 {
 689         __u8 eir, OldMessageCount;
 690         int iobase, tmp;
 691
 692         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
 693
 694         iobase = self->io.fir_base;
 695
 696         switch_bank(iobase, BANK0);
 697         self->InterruptID = inb(iobase+FIR_IIR);
 698         self->BusStatus = inb(iobase+FIR_BSR);
 699
 700         OldMessageCount = (self->LineStatus + 1) & 0x07;
 701         self->LineStatus = inb(iobase+FIR_LSR);
 702         //self->ier = inb(iobase+FIR_IER);              2000/12/1 04:32PM
 703         eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
 704
 705         IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
 706         IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
 707         IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
 708         IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
 709
 710         /* Disable interrupts */
 711          SetCOMInterrupts(self, FALSE);
 712
 713         /* Tx or Rx Interrupt */
 714
 715         if (eir & IIR_EOM)
 716         {
 717                 if (self->io.direction == IO_XMIT) /* TX */
 718                 {
 719                         IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
 720
 721                         if(ali_ircc_dma_xmit_complete(self))
 722                         {
 723                                 if (irda_device_txqueue_empty(self->netdev))
 724                                 {
 725                                         /* Prepare for receive */
 726                                         ali_ircc_dma_receive(self);
 727                                         self->ier = IER_EOM;
 728                                 }
 729                         }
 730                         else
 731                         {
 732                                 self->ier = IER_EOM;
 733                         }
 734
 735                 }
 736                 else /* RX */
 737                 {
 738                         IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
 739
 740                         if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 741                         {
 742                                 self->rcvFramesOverflow = TRUE;
 743                                 IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__);
 744                         }
 745
 746                         if (ali_ircc_dma_receive_complete(self))
 747                         {
 748                                 IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__);
 749
 750                                 self->ier = IER_EOM;
 751                         }
 752                         else
 753                         {
 754                                 IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__);
 755
 756                                 self->ier = IER_EOM | IER_TIMER;
 757                         }
 758
 759                 }
 760         }
 761         /* Timer Interrupt */
 762         else if (eir & IIR_TIMER)
 763         {
 764                 if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 765                 {
 766                         self->rcvFramesOverflow = TRUE;
 767                         IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__);
 768                 }
 769                 /* Disable Timer */
 770                 switch_bank(iobase, BANK1);
 771                 tmp = inb(iobase+FIR_CR);
 772                 outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR);
 773
 774                 /* Check if this is a Tx timer interrupt */
 775                 if (self->io.direction == IO_XMIT)
 776                 {
 777                         ali_ircc_dma_xmit(self);
 778
 779                         /* Interrupt on EOM */
 780                         self->ier = IER_EOM;
 781
 782                 }
 783                 else /* Rx */
 784                 {
 785                         if(ali_ircc_dma_receive_complete(self))
 786                         {
 787                                 self->ier = IER_EOM;
 788                         }
 789                         else
 790                         {
 791                                 self->ier = IER_EOM | IER_TIMER;
 792                         }
 793                 }
 794         }
 795
 796         /* Restore Interrupt */
 797         SetCOMInterrupts(self, TRUE);
 798
 799         IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
 800         return IRQ_RETVAL(eir);
 801 }
 802
 803 /*
 804  * Function ali_ircc_sir_interrupt (irq, self, eir)
 805  *
 806  *    Handle SIR interrupt
 807  *
 808  */
 809 static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
 810 {
 811         int iobase;
 812         int iir, lsr;
 813
 814         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 815
 816         iobase = self->io.sir_base;
 817
 818         iir = inb(iobase+UART_IIR) & UART_IIR_ID;
 819         if (iir) {
 820                 /* Clear interrupt */
 821                 lsr = inb(iobase+UART_LSR);
 822
 823                 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
 824                            iir, lsr, iobase);
 825
 826                 switch (iir)
 827                 {
 828                         case UART_IIR_RLSI:
 829                                 IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
 830                                 break;
 831                         case UART_IIR_RDI:
 832                                 /* Receive interrupt */
 833                                 ali_ircc_sir_receive(self);
 834                                 break;
 835                         case UART_IIR_THRI:
 836                                 if (lsr & UART_LSR_THRE)
 837                                 {
 838                                         /* Transmitter ready for data */
 839                                         ali_ircc_sir_write_wakeup(self);
 840                                 }
 841                                 break;
 842                         default:
 843                                 IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
 844                                 break;
 845                 }
 846
 847         }
 848
 849
 850         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 851
 852         return IRQ_RETVAL(iir);
 853 }
 854
 855
 856 /*
 857  * Function ali_ircc_sir_receive (self)
 858  *
 859  *    Receive one frame from the infrared port
 860  *
 861  */
 862 static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
 863 {
 864         int boguscount = 0;
 865         int iobase;
 866
 867         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 868         IRDA_ASSERT(self != NULL, return;);
 869
 870         iobase = self->io.sir_base;
 871
 872         /*
 873          * Receive all characters in Rx FIFO, unwrap and unstuff them.
 874          * async_unwrap_char will deliver all found frames
 875          */
 876         do {
 877                 async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff,
 878                                   inb(iobase+UART_RX));
 879
 880                 /* Make sure we don't stay here too long */
 881                 if (boguscount++ > 32) {
 882                         IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
 883                         break;
 884                 }
 885         } while (inb(iobase+UART_LSR) & UART_LSR_DR);
 886
 887         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 888 }
 889
 890 /*
 891  * Function ali_ircc_sir_write_wakeup (tty)
 892  *
 893  *    Called by the driver when there's room for more data.  If we have
 894  *    more packets to send, we send them here.
 895  *
 896  */
 897 static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
 898 {
 899         int actual = 0;
 900         int iobase;
 901
 902         IRDA_ASSERT(self != NULL, return;);
 903
 904         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 905
 906         iobase = self->io.sir_base;
 907
 908         /* Finished with frame?  */
 909         if (self->tx_buff.len > 0)
 910         {
 911                 /* Write data left in transmit buffer */
 912                 actual = ali_ircc_sir_write(iobase, self->io.fifo_size,
 913                                       self->tx_buff.data, self->tx_buff.len);
 914                 self->tx_buff.data += actual;
 915                 self->tx_buff.len  -= actual;
 916         }
 917         else
 918         {
 919                 if (self->new_speed)
 920                 {
 921                         /* We must wait until all data are gone */
 922                         while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
 923                                 IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
 924
 925                         IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
 926                         ali_ircc_change_speed(self, self->new_speed);
 927                         self->new_speed = 0;
 928
 929                         // benjamin 2000/11/10 06:32PM
 930                         if (self->io.speed > 115200)
 931                         {
 932                                 IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ );
 933
 934                                 self->ier = IER_EOM;
 935                                 // SetCOMInterrupts(self, TRUE);
 936                                 return;
 937                         }
 938                 }
 939                 else
 940                 {
 941                         netif_wake_queue(self->netdev);
 942                 }
 943
 944                 self->netdev->stats.tx_packets++;
 945
 946                 /* Turn on receive interrupts */
 947                 outb(UART_IER_RDI, iobase+UART_IER);
 948         }
 949
 950         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 951 }
 952
 953 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
 954 {
 955         struct net_device *dev = self->netdev;
 956         int iobase;
 957
 958         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 959
 960         IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud);
 961
 962         /* This function *must* be called with irq off and spin-lock.
 963          * - Jean II */
 964
 965         iobase = self->io.fir_base;
 966
 967         SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM
 968
 969         /* Go to MIR, FIR Speed */
 970         if (baud > 115200)
 971         {
 972
 973
 974                 ali_ircc_fir_change_speed(self, baud);
 975
 976                 /* Install FIR xmit handler*/
 977                 dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
 978
 979                 /* Enable Interuupt */
 980                 self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
 981
 982                 /* Be ready for incomming frames */
 983                 ali_ircc_dma_receive(self);     // benajmin 2000/11/8 07:46PM not complete
 984         }
 985         /* Go to SIR Speed */
 986         else
 987         {
 988                 ali_ircc_sir_change_speed(self, baud);
 989
 990                 /* Install SIR xmit handler*/
 991                 dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
 992         }
 993
 994
 995         SetCOMInterrupts(self, TRUE);   // 2000/11/24 11:43AM
 996
 997         netif_wake_queue(self->netdev);
 998
 999         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1000 }
1001
1002 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
1003 {
1004
1005         int iobase;
1006         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1007         struct net_device *dev;
1008
1009         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1010
1011         IRDA_ASSERT(self != NULL, return;);
1012
1013         dev = self->netdev;
1014         iobase = self->io.fir_base;
1015
1016         IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
1017
1018         /* Come from SIR speed */
1019         if(self->io.speed <=115200)
1020         {
1021                 SIR2FIR(iobase);
1022         }
1023
1024         /* Update accounting for new speed */
1025         self->io.speed = baud;
1026
1027         // Set Dongle Speed mode
1028         ali_ircc_change_dongle_speed(self, baud);
1029
1030         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1031 }
1032
1033 /*
1034  * Function ali_sir_change_speed (self, speed)
1035  *
1036  *    Set speed of IrDA port to specified baudrate
1037  *
1038  */
1039 static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
1040 {
1041         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1042         unsigned long flags;
1043         int iobase;
1044         int fcr;    /* FIFO control reg */
1045         int lcr;    /* Line control reg */
1046         int divisor;
1047
1048         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1049
1050         IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
1051
1052         IRDA_ASSERT(self != NULL, return;);
1053
1054         iobase = self->io.sir_base;
1055
1056         /* Come from MIR or FIR speed */
1057         if(self->io.speed >115200)
1058         {
1059                 // Set Dongle Speed mode first
1060                 ali_ircc_change_dongle_speed(self, speed);
1061
1062                 FIR2SIR(iobase);
1063         }
1064
1065         // Clear Line and Auxiluary status registers 2000/11/24 11:47AM
1066
1067         inb(iobase+UART_LSR);
1068         inb(iobase+UART_SCR);
1069
1070         /* Update accounting for new speed */
1071         self->io.speed = speed;
1072
1073         spin_lock_irqsave(&self->lock, flags);
1074
1075         divisor = 115200/speed;
1076
1077         fcr = UART_FCR_ENABLE_FIFO;
1078
1079         /*
1080          * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1081          * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1082          * about this timeout since it will always be fast enough.
1083          */
1084         if (self->io.speed < 38400)
1085                 fcr |= UART_FCR_TRIGGER_1;
1086         else
1087                 fcr |= UART_FCR_TRIGGER_14;
1088
1089         /* IrDA ports use 8N1 */
1090         lcr = UART_LCR_WLEN8;
1091
1092         outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
1093         outb(divisor & 0xff,      iobase+UART_DLL); /* Set speed */
1094         outb(divisor >> 8,        iobase+UART_DLM);
1095         outb(lcr,                 iobase+UART_LCR); /* Set 8N1  */
1096         outb(fcr,                 iobase+UART_FCR); /* Enable FIFO's */
1097
1098         /* without this, the conection will be broken after come back from FIR speed,
1099            but with this, the SIR connection is harder to established */
1100         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
1101
1102         spin_unlock_irqrestore(&self->lock, flags);
1103
1104         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1105 }
1106
1107 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
1108 {
1109
1110         struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1111         int iobase,dongle_id;
1112         int tmp = 0;
1113
1114         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1115
1116         iobase = self->io.fir_base;     /* or iobase = self->io.sir_base; */
1117         dongle_id = self->io.dongle_id;
1118
1119         /* We are already locked, no need to do it again */
1120
1121         IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
1122
1123         switch_bank(iobase, BANK2);
1124         tmp = inb(iobase+FIR_IRDA_CR);
1125
1126         /* IBM type dongle */
1127         if(dongle_id == 0)
1128         {
1129                 if(speed == 4000000)
1130                 {
1131                         //            __ __
1132                         // SD/MODE __|     |__ __
1133                         //               __ __
1134                         // IRTX    __ __|     |__
1135                         //         T1 T2 T3 T4 T5
1136
1137                         tmp &=  ~IRDA_CR_HDLC;          // HDLC=0
1138                         tmp |= IRDA_CR_CRC;             // CRC=1
1139
1140                         switch_bank(iobase, BANK2);
1141                         outb(tmp, iobase+FIR_IRDA_CR);
1142
1143                         // T1 -> SD/MODE:0 IRTX:0
1144                         tmp &= ~0x09;
1145                         tmp |= 0x02;
1146                         outb(tmp, iobase+FIR_IRDA_CR);
1147                         udelay(2);
1148
1149                         // T2 -> SD/MODE:1 IRTX:0
1150                         tmp &= ~0x01;
1151                         tmp |= 0x0a;
1152                         outb(tmp, iobase+FIR_IRDA_CR);
1153                         udelay(2);
1154
1155                         // T3 -> SD/MODE:1 IRTX:1
1156                         tmp |= 0x0b;
1157                         outb(tmp, iobase+FIR_IRDA_CR);
1158                         udelay(2);
1159
1160                         // T4 -> SD/MODE:0 IRTX:1
1161                         tmp &= ~0x08;
1162                         tmp |= 0x03;
1163                         outb(tmp, iobase+FIR_IRDA_CR);
1164                         udelay(2);
1165
1166                         // T5 -> SD/MODE:0 IRTX:0
1167                         tmp &= ~0x09;
1168                         tmp |= 0x02;
1169                         outb(tmp, iobase+FIR_IRDA_CR);
1170                         udelay(2);
1171
1172                         // reset -> Normal TX output Signal
1173                         outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
1174                 }
1175                 else /* speed <=1152000 */
1176                 {
1177                         //            __
1178                         // SD/MODE __|  |__
1179                         //
1180                         // IRTX    ________
1181                         //         T1 T2 T3
1182
1183                         /* MIR 115200, 57600 */
1184                         if (speed==1152000)
1185                         {
1186                                 tmp |= 0xA0;       //HDLC=1, 1.152Mbps=1
1187                         }
1188                         else
1189                         {
1190                                 tmp &=~0x80;       //HDLC 0.576Mbps
1191                                 tmp |= 0x20;       //HDLC=1,
1192                         }
1193
1194                         tmp |= IRDA_CR_CRC;             // CRC=1
1195
1196                         switch_bank(iobase, BANK2);
1197                         outb(tmp, iobase+FIR_IRDA_CR);
1198
1199                         /* MIR 115200, 57600 */
1200
1201                         //switch_bank(iobase, BANK2);
1202                         // T1 -> SD/MODE:0 IRTX:0
1203                         tmp &= ~0x09;
1204                         tmp |= 0x02;
1205                         outb(tmp, iobase+FIR_IRDA_CR);
1206                         udelay(2);
1207
1208                         // T2 -> SD/MODE:1 IRTX:0
1209                         tmp &= ~0x01;
1210                         tmp |= 0x0a;
1211                         outb(tmp, iobase+FIR_IRDA_CR);
1212
1213                         // T3 -> SD/MODE:0 IRTX:0
1214                         tmp &= ~0x09;
1215                         tmp |= 0x02;
1216                         outb(tmp, iobase+FIR_IRDA_CR);
1217                         udelay(2);
1218
1219                         // reset -> Normal TX output Signal
1220                         outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
1221                 }
1222         }
1223         else if (dongle_id == 1) /* HP HDSL-3600 */
1224         {
1225                 switch(speed)
1226                 {
1227                 case 4000000:
1228                         tmp &=  ~IRDA_CR_HDLC;  // HDLC=0
1229                         break;
1230
1231                 case 1152000:
1232                         tmp |= 0xA0;            // HDLC=1, 1.152Mbps=1
1233                         break;
1234
1235                 case 576000:
1236                         tmp &=~0x80;            // HDLC 0.576Mbps
1237                         tmp |= 0x20;            // HDLC=1,
1238                         break;
1239                 }
1240
1241                 tmp |= IRDA_CR_CRC;             // CRC=1
1242
1243                 switch_bank(iobase, BANK2);
1244                 outb(tmp, iobase+FIR_IRDA_CR);
1245         }
1246         else /* HP HDSL-1100 */
1247         {
1248                 if(speed <= 115200) /* SIR */
1249                 {
1250
1251                         tmp &= ~IRDA_CR_FIR_SIN;        // HP sin select = 0
1252
1253                         switch_bank(iobase, BANK2);
1254                         outb(tmp, iobase+FIR_IRDA_CR);
1255                 }
1256                 else /* MIR FIR */
1257                 {
1258
1259                         switch(speed)
1260                         {
1261                         case 4000000:
1262                                 tmp &=  ~IRDA_CR_HDLC;  // HDLC=0
1263                                 break;
1264
1265                         case 1152000:
1266                                 tmp |= 0xA0;            // HDLC=1, 1.152Mbps=1
1267                                 break;
1268
1269                         case 576000:
1270                                 tmp &=~0x80;            // HDLC 0.576Mbps
1271                                 tmp |= 0x20;            // HDLC=1,
1272                                 break;
1273                         }
1274
1275                         tmp |= IRDA_CR_CRC;             // CRC=1
1276                         tmp |= IRDA_CR_FIR_SIN;         // HP sin select = 1
1277
1278                         switch_bank(iobase, BANK2);
1279                         outb(tmp, iobase+FIR_IRDA_CR);
1280                 }
1281         }
1282
1283         switch_bank(iobase, BANK0);
1284
1285         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1286 }
1287
1288 /*
1289  * Function ali_ircc_sir_write (driver)
1290  *
1291  *    Fill Tx FIFO with transmit data
1292  *
1293  */
1294 static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
1295 {
1296         int actual = 0;
1297
1298         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1299
1300         /* Tx FIFO should be empty! */
1301         if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
1302                 IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
1303                 return 0;
1304         }
1305
1306         /* Fill FIFO with current frame */
1307         while ((fifo_size-- > 0) && (actual < len)) {
1308                 /* Transmit next byte */
1309                 outb(buf[actual], iobase+UART_TX);
1310
1311                 actual++;
1312         }
1313
1314         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1315         return actual;
1316 }
1317
1318 /*
1319  * Function ali_ircc_net_open (dev)
1320  *
1321  *    Start the device
1322  *
1323  */
1324 static int ali_ircc_net_open(struct net_device *dev)
1325 {
1326         struct ali_ircc_cb *self;
1327         int iobase;
1328         char hwname[32];
1329
1330         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1331
1332         IRDA_ASSERT(dev != NULL, return -1;);
1333
1334         self = netdev_priv(dev);
1335
1336         IRDA_ASSERT(self != NULL, return 0;);
1337
1338         iobase = self->io.fir_base;
1339
1340         /* Request IRQ and install Interrupt Handler */
1341         if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev))
1342         {
1343                 IRDA_WARNING("%s, unable to allocate irq=%d\n",
1344                              ALI_IRCC_DRIVER_NAME,
1345                              self->io.irq);
1346                 return -EAGAIN;
1347         }
1348
1349         /*
1350          * Always allocate the DMA channel after the IRQ, and clean up on
1351          * failure.
1352          */
1353         if (request_dma(self->io.dma, dev->name)) {
1354                 IRDA_WARNING("%s, unable to allocate dma=%d\n",
1355                              ALI_IRCC_DRIVER_NAME,
1356                              self->io.dma);
1357                 free_irq(self->io.irq, self);
1358                 return -EAGAIN;
1359         }
1360
1361         /* Turn on interrups */
1362         outb(UART_IER_RDI , iobase+UART_IER);
1363
1364         /* Ready to play! */
1365         netif_start_queue(dev); //benjamin by irport
1366
1367         /* Give self a hardware name */
1368         sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base);
1369
1370         /*
1371          * Open new IrLAP layer instance, now that everything should be
1372          * initialized properly
1373          */
1374         self->irlap = irlap_open(dev, &self->qos, hwname);
1375
1376         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1377
1378         return 0;
1379 }
1380
1381 /*
1382  * Function ali_ircc_net_close (dev)
1383  *
1384  *    Stop the device
1385  *
1386  */
1387 static int ali_ircc_net_close(struct net_device *dev)
1388 {
1389
1390         struct ali_ircc_cb *self;
1391         //int iobase;
1392
1393         IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
1394
1395         IRDA_ASSERT(dev != NULL, return -1;);
1396
1397         self = netdev_priv(dev);
1398         IRDA_ASSERT(self != NULL, return 0;);
1399
1400         /* Stop device */
1401         netif_stop_queue(dev);
1402
1403         /* Stop and remove instance of IrLAP */
1404         if (self->irlap)
1405                 irlap_close(self->irlap);
1406         self->irlap = NULL;
1407
1408         disable_dma(self->io.dma);
1409
1410         /* Disable interrupts */
1411         SetCOMInterrupts(self, FALSE);
1412
1413         free_irq(self->io.irq, dev);
1414         free_dma(self->io.dma);
1415
1416         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1417
1418         return 0;
1419 }
1420
1421 /*
1422  * Function ali_ircc_fir_hard_xmit (skb, dev)
1423  *
1424  *    Transmit the frame
1425  *
1426  */
1427 static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
1428 {
1429         struct ali_ircc_cb *self;
1430         unsigned long flags;
1431         int iobase;
1432         __u32 speed;
1433         int mtt, diff;
1434
1435         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1436
1437         self = netdev_priv(dev);
1438         iobase = self->io.fir_base;
1439
1440         netif_stop_queue(dev);
1441
1442         /* Make sure tests *& speed change are atomic */
1443         spin_lock_irqsave(&self->lock, flags);
1444
1445         /* Note : you should make sure that speed changes are not going
1446          * to corrupt any outgoing frame. Look at nsc-ircc for the gory
1447          * details - Jean II */
1448
1449         /* Check if we need to change the speed */
1450         speed = irda_get_next_speed(skb);
1451         if ((speed != self->io.speed) && (speed != -1)) {
1452                 /* Check for empty frame */
1453                 if (!skb->len) {
1454                         ali_ircc_change_speed(self, speed);
1455                         dev->trans_start = jiffies;
1456                         spin_unlock_irqrestore(&self->lock, flags);
1457                         dev_kfree_skb(skb);
1458                         return 0;
1459                 } else
1460                         self->new_speed = speed;
1461         }
1462
1463         /* Register and copy this frame to DMA memory */
1464         self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
1465         self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
1466         self->tx_fifo.tail += skb->len;
1467
1468         dev->stats.tx_bytes += skb->len;
1469
1470         skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start,
1471                       skb->len);
1472         self->tx_fifo.len++;
1473         self->tx_fifo.free++;
1474
1475         /* Start transmit only if there is currently no transmit going on */
1476         if (self->tx_fifo.len == 1)
1477         {
1478                 /* Check if we must wait the min turn time or not */
1479                 mtt = irda_get_mtt(skb);
1480
1481                 if (mtt)
1482                 {
1483                         /* Check how much time we have used already */
1484                         do_gettimeofday(&self->now);
1485
1486                         diff = self->now.tv_usec - self->stamp.tv_usec;
1487                         /* self->stamp is set from ali_ircc_dma_receive_complete() */
1488
1489                         IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff);
1490
1491                         if (diff < 0)
1492                                 diff += 1000000;
1493
1494                         /* Check if the mtt is larger than the time we have
1495                          * already used by all the protocol processing
1496                          */
1497                         if (mtt > diff)
1498                         {
1499                                 mtt -= diff;
1500
1501                                 /*
1502                                  * Use timer if delay larger than 1000 us, and
1503                                  * use udelay for smaller values which should
1504                                  * be acceptable
1505                                  */
1506                                 if (mtt > 500)
1507                                 {
1508                                         /* Adjust for timer resolution */
1509                                         mtt = (mtt+250) / 500;  /* 4 discard, 5 get advanced, Let's round off */
1510
1511                                         IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
1512
1513                                         /* Setup timer */
1514                                         if (mtt == 1) /* 500 us */
1515                                         {
1516                                                 switch_bank(iobase, BANK1);
1517                                                 outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR);
1518                                         }
1519                                         else if (mtt == 2) /* 1 ms */
1520                                         {
1521                                                 switch_bank(iobase, BANK1);
1522                                                 outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR);
1523                                         }
1524                                         else /* > 2ms -> 4ms */
1525                                         {
1526                                                 switch_bank(iobase, BANK1);
1527                                                 outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR);
1528                                         }
1529
1530
1531                                         /* Start timer */
1532                                         outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
1533                                         self->io.direction = IO_XMIT;
1534
1535                                         /* Enable timer interrupt */
1536                                         self->ier = IER_TIMER;
1537                                         SetCOMInterrupts(self, TRUE);
1538
1539                                         /* Timer will take care of the rest */
1540                                         goto out;
1541                                 }
1542                                 else
1543                                         udelay(mtt);
1544                         } // if (if (mtt > diff)
1545                 }// if (mtt)
1546
1547                 /* Enable EOM interrupt */
1548                 self->ier = IER_EOM;
1549                 SetCOMInterrupts(self, TRUE);
1550
1551                 /* Transmit frame */
1552                 ali_ircc_dma_xmit(self);
1553         } // if (self->tx_fifo.len == 1)
1554
1555  out:
1556
1557         /* Not busy transmitting anymore if window is not full */
1558         if (self->tx_fifo.free < MAX_TX_WINDOW)
1559                 netif_wake_queue(self->netdev);
1560
1561         /* Restore bank register */
1562         switch_bank(iobase, BANK0);
1563
1564         dev->trans_start = jiffies;
1565         spin_unlock_irqrestore(&self->lock, flags);
1566         dev_kfree_skb(skb);
1567
1568         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1569         return 0;
1570 }
1571
1572
1573 static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
1574 {
1575         int iobase, tmp;
1576         unsigned char FIFO_OPTI, Hi, Lo;
1577
1578
1579         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1580
1581         iobase = self->io.fir_base;
1582
1583         /* FIFO threshold , this method comes from NDIS5 code */
1584
1585         if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold)
1586                 FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1;
1587         else
1588                 FIFO_OPTI = TX_FIFO_Threshold;
1589
1590         /* Disable DMA */
1591         switch_bank(iobase, BANK1);
1592         outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1593
1594         self->io.direction = IO_XMIT;
1595
1596         irda_setup_dma(self->io.dma,
1597                        ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
1598                         self->tx_buff.head) + self->tx_buff_dma,
1599                        self->tx_fifo.queue[self->tx_fifo.ptr].len,
1600                        DMA_TX_MODE);
1601
1602         /* Reset Tx FIFO */
1603         switch_bank(iobase, BANK0);
1604         outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
1605
1606         /* Set Tx FIFO threshold */
1607         if (self->fifo_opti_buf!=FIFO_OPTI)
1608         {
1609                 switch_bank(iobase, BANK1);
1610                 outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ;
1611                 self->fifo_opti_buf=FIFO_OPTI;
1612         }
1613
1614         /* Set Tx DMA threshold */
1615         switch_bank(iobase, BANK1);
1616         outb(TX_DMA_Threshold, iobase+FIR_DMA_TR);
1617
1618         /* Set max Tx frame size */
1619         Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f;
1620         Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff;
1621         switch_bank(iobase, BANK2);
1622         outb(Hi, iobase+FIR_TX_DSR_HI);
1623         outb(Lo, iobase+FIR_TX_DSR_LO);
1624
1625         /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */
1626         switch_bank(iobase, BANK0);
1627         tmp = inb(iobase+FIR_LCR_B);
1628         tmp &= ~0x20; // Disable SIP
1629         outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
1630         IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B));
1631
1632         outb(0, iobase+FIR_LSR);
1633
1634         /* Enable DMA and Burst Mode */
1635         switch_bank(iobase, BANK1);
1636         outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
1637
1638         switch_bank(iobase, BANK0);
1639
1640         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1641 }
1642
1643 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
1644 {
1645         int iobase;
1646         int ret = TRUE;
1647
1648         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1649
1650         iobase = self->io.fir_base;
1651
1652         /* Disable DMA */
1653         switch_bank(iobase, BANK1);
1654         outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1655
1656         /* Check for underrun! */
1657         switch_bank(iobase, BANK0);
1658         if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
1659
1660         {
1661                 IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__);
1662                 self->netdev->stats.tx_errors++;
1663                 self->netdev->stats.tx_fifo_errors++;
1664         }
1665         else
1666         {
1667                 self->netdev->stats.tx_packets++;
1668         }
1669
1670         /* Check if we need to change the speed */
1671         if (self->new_speed)
1672         {
1673                 ali_ircc_change_speed(self, self->new_speed);
1674                 self->new_speed = 0;
1675         }
1676
1677         /* Finished with this frame, so prepare for next */
1678         self->tx_fifo.ptr++;
1679         self->tx_fifo.len--;
1680
1681         /* Any frames to be sent back-to-back? */
1682         if (self->tx_fifo.len)
1683         {
1684                 ali_ircc_dma_xmit(self);
1685
1686                 /* Not finished yet! */
1687                 ret = FALSE;
1688         }
1689         else
1690         {       /* Reset Tx FIFO info */
1691                 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1692                 self->tx_fifo.tail = self->tx_buff.head;
1693         }
1694
1695         /* Make sure we have room for more frames */
1696         if (self->tx_fifo.free < MAX_TX_WINDOW) {
1697                 /* Not busy transmitting anymore */
1698                 /* Tell the network layer, that we can accept more frames */
1699                 netif_wake_queue(self->netdev);
1700         }
1701
1702         switch_bank(iobase, BANK0);
1703
1704         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1705         return ret;
1706 }
1707
1708 /*
1709  * Function ali_ircc_dma_receive (self)
1710  *
1711  *    Get ready for receiving a frame. The device will initiate a DMA
1712  *    if it starts to receive a frame.
1713  *
1714  */
1715 static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
1716 {
1717         int iobase, tmp;
1718
1719         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1720
1721         iobase = self->io.fir_base;
1722
1723         /* Reset Tx FIFO info */
1724         self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1725         self->tx_fifo.tail = self->tx_buff.head;
1726
1727         /* Disable DMA */
1728         switch_bank(iobase, BANK1);
1729         outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1730
1731         /* Reset Message Count */
1732         switch_bank(iobase, BANK0);
1733         outb(0x07, iobase+FIR_LSR);
1734
1735         self->rcvFramesOverflow = FALSE;
1736
1737         self->LineStatus = inb(iobase+FIR_LSR) ;
1738
1739         /* Reset Rx FIFO info */
1740         self->io.direction = IO_RECV;
1741         self->rx_buff.data = self->rx_buff.head;
1742
1743         /* Reset Rx FIFO */
1744         // switch_bank(iobase, BANK0);
1745         outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
1746
1747         self->st_fifo.len = self->st_fifo.pending_bytes = 0;
1748         self->st_fifo.tail = self->st_fifo.head = 0;
1749
1750         irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1751                        DMA_RX_MODE);
1752
1753         /* Set Receive Mode,Brick Wall */
1754         //switch_bank(iobase, BANK0);
1755         tmp = inb(iobase+FIR_LCR_B);
1756         outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
1757         IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B));
1758
1759         /* Set Rx Threshold */
1760         switch_bank(iobase, BANK1);
1761         outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
1762         outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
1763
1764         /* Enable DMA and Burst Mode */
1765         // switch_bank(iobase, BANK1);
1766         outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
1767
1768         switch_bank(iobase, BANK0);
1769         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1770         return 0;
1771 }
1772
1773 static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
1774 {
1775         struct st_fifo *st_fifo;
1776         struct sk_buff *skb;
1777         __u8 status, MessageCount;
1778         int len, i, iobase, val;
1779
1780         IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1781
1782         st_fifo = &self->st_fifo;
1783         iobase = self->io.fir_base;
1784
1785         switch_bank(iobase, BANK0);
1786         MessageCount = inb(iobase+ FIR_LSR)&0x07;
1787
1788         if (MessageCount > 0)
1789                 IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
1790
1791         for (i=0; i<=MessageCount; i++)
1792         {
1793                 /* Bank 0 */
1794                 switch_bank(iobase, BANK0);
1795                 status = inb(iobase+FIR_LSR);
1796
1797                 switch_bank(iobase, BANK2);
1798                 len = inb(iobase+FIR_RX_DSR_HI) & 0x0f;
1799                 len = len << 8;
1800                 len |= inb(iobase+FIR_RX_DSR_LO);
1801
1802                 IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
1803                 IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
1804
1805                 if (st_fifo->tail >= MAX_RX_WINDOW) {
1806                         IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
1807                         continue;
1808                 }
1809
1810                 st_fifo->entries[st_fifo->tail].status = status;
1811                 st_fifo->entries[st_fifo->tail].len = len;
1812                 st_fifo->pending_bytes += len;
1813                 st_fifo->tail++;
1814                 st_fifo->len++;
1815         }
1816
1817         for (i=0; i<=MessageCount; i++)
1818         {
1819                 /* Get first entry */
1820                 status = st_fifo->entries[st_fifo->head].status;
1821                 len    = st_fifo->entries[st_fifo->head].len;
1822                 st_fifo->pending_bytes -= len;
1823                 st_fifo->head++;
1824                 st_fifo->len--;
1825
1826                 /* Check for errors */
1827                 if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
1828                 {
1829                         IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ );
1830
1831                         /* Skip frame */
1832                         self->netdev->stats.rx_errors++;
1833
1834                         self->rx_buff.data += len;
1835
1836                         if (status & LSR_FIFO_UR)
1837                         {
1838                                 self->netdev->stats.rx_frame_errors++;
1839                                 IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ );
1840                         }
1841                         if (status & LSR_FRAME_ERROR)
1842                         {
1843                                 self->netdev->stats.rx_frame_errors++;
1844                                 IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ );
1845                         }
1846
1847                         if (status & LSR_CRC_ERROR)
1848                         {
1849                                 self->netdev->stats.rx_crc_errors++;
1850                                 IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ );
1851                         }
1852
1853                         if(self->rcvFramesOverflow)
1854                         {
1855                                 self->netdev->stats.rx_frame_errors++;
1856                                 IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ );
1857                         }
1858                         if(len == 0)
1859                         {
1860                                 self->netdev->stats.rx_frame_errors++;
1861                                 IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ );
1862                         }
1863                 }
1864                 else
1865                 {
1866
1867                         if (st_fifo->pending_bytes < 32)
1868                         {
1869                                 switch_bank(iobase, BANK0);
1870                                 val = inb(iobase+FIR_BSR);
1871                                 if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
1872                                 {
1873                                         IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ );
1874
1875                                         /* Put this entry back in fifo */
1876                                         st_fifo->head--;
1877                                         st_fifo->len++;
1878                                         st_fifo->pending_bytes += len;
1879                                         st_fifo->entries[st_fifo->head].status = status;
1880                                         st_fifo->entries[st_fifo->head].len = len;
1881
1882                                         /*
1883                                         * DMA not finished yet, so try again
1884                                         * later, set timer value, resolution
1885                                         * 500 us
1886                                         */
1887
1888                                         switch_bank(iobase, BANK1);
1889                                         outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM
1890
1891                                         /* Enable Timer */
1892                                         outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
1893
1894                                         return FALSE; /* I'll be back! */
1895                                 }
1896                         }
1897
1898                         /*
1899                          * Remember the time we received this frame, so we can
1900                          * reduce the min turn time a bit since we will know
1901                          * how much time we have used for protocol processing
1902                          */
1903                         do_gettimeofday(&self->stamp);
1904
1905                         skb = dev_alloc_skb(len+1);
1906                         if (skb == NULL)
1907                         {
1908                                 IRDA_WARNING("%s(), memory squeeze, "
1909                                              "dropping frame.\n",
1910                                              __func__);
1911                                 self->netdev->stats.rx_dropped++;
1912
1913                                 return FALSE;
1914                         }
1915
1916                         /* Make sure IP header gets aligned */
1917                         skb_reserve(skb, 1);
1918
1919                         /* Copy frame without CRC, CRC is removed by hardware*/
1920                         skb_put(skb, len);
1921                         skb_copy_to_linear_data(skb, self->rx_buff.data, len);
1922
1923                         /* Move to next frame */
1924                         self->rx_buff.data += len;
1925                         self->netdev->stats.rx_bytes += len;
1926                         self->netdev->stats.rx_packets++;
1927
1928                         skb->dev = self->netdev;
1929                         skb_reset_mac_header(skb);
1930                         skb->protocol = htons(ETH_P_IRDA);
1931                         netif_rx(skb);
1932                 }
1933         }
1934
1935         switch_bank(iobase, BANK0);
1936
1937         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1938         return TRUE;
1939 }
1940
1941
1942
1943 /*
1944  * Function ali_ircc_sir_hard_xmit (skb, dev)
1945  *
1946  *    Transmit the frame!
1947  *
1948  */
1949 static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
1950 {
1951         struct ali_ircc_cb *self;
1952         unsigned long flags;
1953         int iobase;
1954         __u32 speed;
1955
1956         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1957
1958         IRDA_ASSERT(dev != NULL, return 0;);
1959
1960         self = netdev_priv(dev);
1961         IRDA_ASSERT(self != NULL, return 0;);
1962
1963         iobase = self->io.sir_base;
1964
1965         netif_stop_queue(dev);
1966
1967         /* Make sure tests *& speed change are atomic */
1968         spin_lock_irqsave(&self->lock, flags);
1969
1970         /* Note : you should make sure that speed changes are not going
1971          * to corrupt any outgoing frame. Look at nsc-ircc for the gory
1972          * details - Jean II */
1973
1974         /* Check if we need to change the speed */
1975         speed = irda_get_next_speed(skb);
1976         if ((speed != self->io.speed) && (speed != -1)) {
1977                 /* Check for empty frame */
1978                 if (!skb->len) {
1979                         ali_ircc_change_speed(self, speed);
1980                         dev->trans_start = jiffies;
1981                         spin_unlock_irqrestore(&self->lock, flags);
1982                         dev_kfree_skb(skb);
1983                         return 0;
1984                 } else
1985                         self->new_speed = speed;
1986         }
1987
1988         /* Init tx buffer */
1989         self->tx_buff.data = self->tx_buff.head;
1990
1991         /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
1992         self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
1993                                            self->tx_buff.truesize);
1994
1995         self->netdev->stats.tx_bytes += self->tx_buff.len;
1996
1997         /* Turn on transmit finished interrupt. Will fire immediately!  */
1998         outb(UART_IER_THRI, iobase+UART_IER);
1999
2000         dev->trans_start = jiffies;
2001         spin_unlock_irqrestore(&self->lock, flags);
2002
2003         dev_kfree_skb(skb);
2004
2005         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
2006
2007         return 0;
2008 }
2009
2010
2011 /*
2012  * Function ali_ircc_net_ioctl (dev, rq, cmd)
2013  *
2014  *    Process IOCTL commands for this device
2015  *
2016  */
2017 static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2018 {
2019         struct if_irda_req *irq = (struct if_irda_req *) rq;
2020         struct ali_ircc_cb *self;
2021         unsigned long flags;
2022         int ret = 0;
2023
2024         IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
2025
2026         IRDA_ASSERT(dev != NULL, return -1;);
2027
2028         self = netdev_priv(dev);
2029
2030         IRDA_ASSERT(self != NULL, return -1;);
2031
2032         IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
2033
2034         switch (cmd) {
2035         case SIOCSBANDWIDTH: /* Set bandwidth */
2036                 IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
2037                 /*
2038                  * This function will also be used by IrLAP to change the
2039                  * speed, so we still must allow for speed change within
2040                  * interrupt context.
2041                  */
2042                 if (!in_interrupt() && !capable(CAP_NET_ADMIN))
2043                         return -EPERM;
2044
2045                 spin_lock_irqsave(&self->lock, flags);
2046                 ali_ircc_change_speed(self, irq->ifr_baudrate);
2047                 spin_unlock_irqrestore(&self->lock, flags);
2048                 break;
2049         case SIOCSMEDIABUSY: /* Set media busy */
2050                 IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
2051                 if (!capable(CAP_NET_ADMIN))
2052                         return -EPERM;
2053                 irda_device_set_media_busy(self->netdev, TRUE);
2054                 break;
2055         case SIOCGRECEIVING: /* Check if we are receiving right now */
2056                 IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
2057                 /* This is protected */
2058                 irq->ifr_receiving = ali_ircc_is_receiving(self);
2059                 break;
2060         default:
2061                 ret = -EOPNOTSUPP;
2062         }
2063
2064         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
2065
2066         return ret;
2067 }
2068
2069 /*
2070  * Function ali_ircc_is_receiving (self)
2071  *
2072  *    Return TRUE is we are currently receiving a frame
2073  *
2074  */
2075 static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
2076 {
2077         unsigned long flags;
2078         int status = FALSE;
2079         int iobase;
2080
2081         IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
2082
2083         IRDA_ASSERT(self != NULL, return FALSE;);
2084
2085         spin_lock_irqsave(&self->lock, flags);
2086
2087         if (self->io.speed > 115200)
2088         {
2089                 iobase = self->io.fir_base;
2090
2091                 switch_bank(iobase, BANK1);
2092                 if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
2093                 {
2094                         /* We are receiving something */
2095                         IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
2096                         status = TRUE;
2097                 }
2098                 switch_bank(iobase, BANK0);
2099         }
2100         else
2101         {
2102                 status = (self->rx_buff.state != OUTSIDE_FRAME);
2103         }
2104
2105         spin_unlock_irqrestore(&self->lock, flags);
2106
2107         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
2108
2109         return status;
2110 }
2111
2112 static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state)
2113 {
2114         struct ali_ircc_cb *self = platform_get_drvdata(dev);
2115
2116         IRDA_MESSAGE("%s, Suspending\n", ALI_IRCC_DRIVER_NAME);
2117
2118         if (self->io.suspended)
2119                 return 0;
2120
2121         ali_ircc_net_close(self->netdev);
2122
2123         self->io.suspended = 1;
2124
2125         return 0;
2126 }
2127
2128 static int ali_ircc_resume(struct platform_device *dev)
2129 {
2130         struct ali_ircc_cb *self = platform_get_drvdata(dev);
2131
2132         if (!self->io.suspended)
2133                 return 0;
2134
2135         ali_ircc_net_open(self->netdev);
2136
2137         IRDA_MESSAGE("%s, Waking up\n", ALI_IRCC_DRIVER_NAME);
2138
2139         self->io.suspended = 0;
2140
2141         return 0;
2142 }
2143
2144 /* ALi Chip Function */
2145
2146 static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
2147 {
2148
2149         unsigned char newMask;
2150
2151         int iobase = self->io.fir_base; /* or sir_base */
2152
2153         IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
2154
2155         /* Enable the interrupt which we wish to */
2156         if (enable){
2157                 if (self->io.direction == IO_XMIT)
2158                 {
2159                         if (self->io.speed > 115200) /* FIR, MIR */
2160                         {
2161                                 newMask = self->ier;
2162                         }
2163                         else /* SIR */
2164                         {
2165                                 newMask = UART_IER_THRI | UART_IER_RDI;
2166                         }
2167                 }
2168                 else {
2169                         if (self->io.speed > 115200) /* FIR, MIR */
2170                         {
2171                                 newMask = self->ier;
2172                         }
2173                         else /* SIR */
2174                         {
2175                                 newMask = UART_IER_RDI;
2176                         }
2177                 }
2178         }
2179         else /* Disable all the interrupts */
2180         {
2181                 newMask = 0x00;
2182
2183         }
2184
2185         //SIR and FIR has different registers
2186         if (self->io.speed > 115200)
2187         {
2188                 switch_bank(iobase, BANK0);
2189                 outb(newMask, iobase+FIR_IER);
2190         }
2191         else
2192                 outb(newMask, iobase+UART_IER);
2193
2194         IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
2195 }
2196
2197 static void SIR2FIR(int iobase)
2198 {
2199         //unsigned char tmp;
2200
2201         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
2202
2203         /* Already protected (change_speed() or setup()), no need to lock.
2204          * Jean II */
2205
2206         outb(0x28, iobase+UART_MCR);
2207         outb(0x68, iobase+UART_MCR);
2208         outb(0x88, iobase+UART_MCR);
2209
2210         outb(0x60, iobase+FIR_MCR);     /*  Master Reset */
2211         outb(0x20, iobase+FIR_MCR);     /*  Master Interrupt Enable */
2212
2213         //tmp = inb(iobase+FIR_LCR_B);  /* SIP enable */
2214         //tmp |= 0x20;
2215         //outb(tmp, iobase+FIR_LCR_B);
2216
2217         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
2218 }
2219
2220 static void FIR2SIR(int iobase)
2221 {
2222         unsigned char val;
2223
2224         IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
2225
2226         /* Already protected (change_speed() or setup()), no need to lock.
2227          * Jean II */
2228
2229         outb(0x20, iobase+FIR_MCR);     /* IRQ to low */
2230         outb(0x00, iobase+UART_IER);
2231
2232         outb(0xA0, iobase+FIR_MCR);     /* Don't set master reset */
2233         outb(0x00, iobase+UART_FCR);
2234         outb(0x07, iobase+UART_FCR);
2235
2236         val = inb(iobase+UART_RX);
2237         val = inb(iobase+UART_LSR);
2238         val = inb(iobase+UART_MSR);
2239
2240         IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
2241 }
2242
2243 MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
2244 MODULE_DESCRIPTION("ALi FIR Controller Driver");
2245 MODULE_LICENSE("GPL");
2246 MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME);
2247
2248
2249 module_param_array(io, int, NULL, 0);
2250 MODULE_PARM_DESC(io, "Base I/O addresses");
2251 module_param_array(irq, int, NULL, 0);
2252 MODULE_PARM_DESC(irq, "IRQ lines");
2253 module_param_array(dma, int, NULL, 0);
2254 MODULE_PARM_DESC(dma, "DMA channels");
2255
2256 module_init(ali_ircc_init);
2257 module_exit(ali_ircc_cleanup);