[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor
[linux-2.6] / drivers / usb / gadget / pxa2xx_udc.c
1 /*
2  * linux/drivers/usb/gadget/pxa2xx_udc.c
3  * Intel PXA25x and IXP4xx on-chip full speed USB device controllers
4  *
5  * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
6  * Copyright (C) 2003 Robert Schwebel, Pengutronix
7  * Copyright (C) 2003 Benedikt Spranger, Pengutronix
8  * Copyright (C) 2003 David Brownell
9  * Copyright (C) 2003 Joshua Wise
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; either version 2 of the License, or
14  * (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
24  *
25  */
26
27 #undef  DEBUG
28 // #define      VERBOSE DBG_VERBOSE
29
30 #include <linux/module.h>
31 #include <linux/kernel.h>
32 #include <linux/ioport.h>
33 #include <linux/types.h>
34 #include <linux/errno.h>
35 #include <linux/delay.h>
36 #include <linux/sched.h>
37 #include <linux/slab.h>
38 #include <linux/init.h>
39 #include <linux/timer.h>
40 #include <linux/list.h>
41 #include <linux/interrupt.h>
42 #include <linux/proc_fs.h>
43 #include <linux/mm.h>
44 #include <linux/platform_device.h>
45 #include <linux/dma-mapping.h>
46 #include <linux/irq.h>
47
48 #include <asm/byteorder.h>
49 #include <asm/dma.h>
50 #include <asm/io.h>
51 #include <asm/system.h>
52 #include <asm/mach-types.h>
53 #include <asm/unaligned.h>
54 #include <asm/hardware.h>
55 #ifdef CONFIG_ARCH_PXA
56 #include <asm/arch/pxa-regs.h>
57 #endif
58
59 #include <linux/usb_ch9.h>
60 #include <linux/usb_gadget.h>
61
62 #include <asm/arch/udc.h>
63
64
65 /*
66  * This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
67  * series processors.  The UDC for the IXP 4xx series is very similar.
68  * There are fifteen endpoints, in addition to ep0.
69  *
70  * Such controller drivers work with a gadget driver.  The gadget driver
71  * returns descriptors, implements configuration and data protocols used
72  * by the host to interact with this device, and allocates endpoints to
73  * the different protocol interfaces.  The controller driver virtualizes
74  * usb hardware so that the gadget drivers will be more portable.
75  * 
76  * This UDC hardware wants to implement a bit too much USB protocol, so
77  * it constrains the sorts of USB configuration change events that work.
78  * The errata for these chips are misleading; some "fixed" bugs from
79  * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
80  */
81
82 #define DRIVER_VERSION  "4-May-2005"
83 #define DRIVER_DESC     "PXA 25x USB Device Controller driver"
84
85
86 static const char driver_name [] = "pxa2xx_udc";
87
88 static const char ep0name [] = "ep0";
89
90
91 // #define      USE_DMA
92 // #define      USE_OUT_DMA
93 // #define      DISABLE_TEST_MODE
94
95 #ifdef CONFIG_ARCH_IXP4XX
96 #undef USE_DMA
97
98 /* cpu-specific register addresses are compiled in to this code */
99 #ifdef CONFIG_ARCH_PXA
100 #error "Can't configure both IXP and PXA"
101 #endif
102
103 #endif
104
105 #include "pxa2xx_udc.h"
106
107
108 #ifdef  USE_DMA
109 static int use_dma = 1;
110 module_param(use_dma, bool, 0);
111 MODULE_PARM_DESC (use_dma, "true to use dma");
112
113 static void dma_nodesc_handler (int dmach, void *_ep);
114 static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
115
116 #ifdef USE_OUT_DMA
117 #define DMASTR " (dma support)"
118 #else
119 #define DMASTR " (dma in)"
120 #endif
121
122 #else   /* !USE_DMA */
123 #define DMASTR " (pio only)"
124 #undef  USE_OUT_DMA
125 #endif
126
127 #ifdef  CONFIG_USB_PXA2XX_SMALL
128 #define SIZE_STR        " (small)"
129 #else
130 #define SIZE_STR        ""
131 #endif
132
133 #ifdef DISABLE_TEST_MODE
134 /* (mode == 0) == no undocumented chip tweaks
135  * (mode & 1)  == double buffer bulk IN
136  * (mode & 2)  == double buffer bulk OUT
137  * ... so mode = 3 (or 7, 15, etc) does it for both
138  */
139 static ushort fifo_mode = 0;
140 module_param(fifo_mode, ushort, 0);
141 MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
142 #endif
143
144 /* ---------------------------------------------------------------------------
145  *      endpoint related parts of the api to the usb controller hardware,
146  *      used by gadget driver; and the inner talker-to-hardware core.
147  * ---------------------------------------------------------------------------
148  */
149
150 static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
151 static void nuke (struct pxa2xx_ep *, int status);
152
153 /* one GPIO should be used to detect VBUS from the host */
154 static int is_vbus_present(void)
155 {
156         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
157
158         if (mach->gpio_vbus)
159                 return pxa_gpio_get(mach->gpio_vbus);
160         if (mach->udc_is_connected)
161                 return mach->udc_is_connected();
162         return 1;
163 }
164
165 /* one GPIO should control a D+ pullup, so host sees this device (or not) */
166 static void pullup_off(void)
167 {
168         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
169
170         if (mach->gpio_pullup)
171                 pxa_gpio_set(mach->gpio_pullup, 0);
172         else if (mach->udc_command)
173                 mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
174 }
175
176 static void pullup_on(void)
177 {
178         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
179
180         if (mach->gpio_pullup)
181                 pxa_gpio_set(mach->gpio_pullup, 1);
182         else if (mach->udc_command)
183                 mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
184 }
185
186 static void pio_irq_enable(int bEndpointAddress)
187 {
188         bEndpointAddress &= 0xf;
189         if (bEndpointAddress < 8)
190                 UICR0 &= ~(1 << bEndpointAddress);
191         else {
192                 bEndpointAddress -= 8;
193                 UICR1 &= ~(1 << bEndpointAddress);
194         }
195 }
196
197 static void pio_irq_disable(int bEndpointAddress)
198 {
199         bEndpointAddress &= 0xf;
200         if (bEndpointAddress < 8)
201                 UICR0 |= 1 << bEndpointAddress;
202         else {
203                 bEndpointAddress -= 8;
204                 UICR1 |= 1 << bEndpointAddress;
205         }
206 }
207
208 /* The UDCCR reg contains mask and interrupt status bits,
209  * so using '|=' isn't safe as it may ack an interrupt.
210  */
211 #define UDCCR_MASK_BITS         (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
212
213 static inline void udc_set_mask_UDCCR(int mask)
214 {
215         UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
216 }
217
218 static inline void udc_clear_mask_UDCCR(int mask)
219 {
220         UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
221 }
222
223 static inline void udc_ack_int_UDCCR(int mask)
224 {
225         /* udccr contains the bits we dont want to change */
226         __u32 udccr = UDCCR & UDCCR_MASK_BITS;
227
228         UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
229 }
230
231 /*
232  * endpoint enable/disable
233  *
234  * we need to verify the descriptors used to enable endpoints.  since pxa2xx
235  * endpoint configurations are fixed, and are pretty much always enabled,
236  * there's not a lot to manage here.
237  *
238  * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints,
239  * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
240  * for a single interface (with only the default altsetting) and for gadget
241  * drivers that don't halt endpoints (not reset by set_interface).  that also
242  * means that if you use ISO, you must violate the USB spec rule that all
243  * iso endpoints must be in non-default altsettings.
244  */
245 static int pxa2xx_ep_enable (struct usb_ep *_ep,
246                 const struct usb_endpoint_descriptor *desc)
247 {
248         struct pxa2xx_ep        *ep;
249         struct pxa2xx_udc       *dev;
250
251         ep = container_of (_ep, struct pxa2xx_ep, ep);
252         if (!_ep || !desc || ep->desc || _ep->name == ep0name
253                         || desc->bDescriptorType != USB_DT_ENDPOINT
254                         || ep->bEndpointAddress != desc->bEndpointAddress
255                         || ep->fifo_size < le16_to_cpu
256                                                 (desc->wMaxPacketSize)) {
257                 DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
258                 return -EINVAL;
259         }
260
261         /* xfer types must match, except that interrupt ~= bulk */
262         if (ep->bmAttributes != desc->bmAttributes
263                         && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
264                         && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
265                 DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
266                 return -EINVAL;
267         }
268
269         /* hardware _could_ do smaller, but driver doesn't */
270         if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
271                                 && le16_to_cpu (desc->wMaxPacketSize)
272                                                 != BULK_FIFO_SIZE)
273                         || !desc->wMaxPacketSize) {
274                 DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
275                 return -ERANGE;
276         }
277
278         dev = ep->dev;
279         if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
280                 DMSG("%s, bogus device state\n", __FUNCTION__);
281                 return -ESHUTDOWN;
282         }
283
284         ep->desc = desc;
285         ep->dma = -1;
286         ep->stopped = 0;
287         ep->pio_irqs = ep->dma_irqs = 0;
288         ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
289
290         /* flush fifo (mostly for OUT buffers) */
291         pxa2xx_ep_fifo_flush (_ep);
292
293         /* ... reset halt state too, if we could ... */
294
295 #ifdef  USE_DMA
296         /* for (some) bulk and ISO endpoints, try to get a DMA channel and
297          * bind it to the endpoint.  otherwise use PIO. 
298          */
299         switch (ep->bmAttributes) {
300         case USB_ENDPOINT_XFER_ISOC:
301                 if (le16_to_cpu(desc->wMaxPacketSize) % 32)
302                         break;
303                 // fall through
304         case USB_ENDPOINT_XFER_BULK:
305                 if (!use_dma || !ep->reg_drcmr)
306                         break;
307                 ep->dma = pxa_request_dma ((char *)_ep->name,
308                                 (le16_to_cpu (desc->wMaxPacketSize) > 64)
309                                         ? DMA_PRIO_MEDIUM /* some iso */
310                                         : DMA_PRIO_LOW,
311                                 dma_nodesc_handler, ep);
312                 if (ep->dma >= 0) {
313                         *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
314                         DMSG("%s using dma%d\n", _ep->name, ep->dma);
315                 }
316         }
317 #endif
318
319         DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
320         return 0;
321 }
322
323 static int pxa2xx_ep_disable (struct usb_ep *_ep)
324 {
325         struct pxa2xx_ep        *ep;
326         unsigned long           flags;
327
328         ep = container_of (_ep, struct pxa2xx_ep, ep);
329         if (!_ep || !ep->desc) {
330                 DMSG("%s, %s not enabled\n", __FUNCTION__,
331                         _ep ? ep->ep.name : NULL);
332                 return -EINVAL;
333         }
334         local_irq_save(flags);
335
336         nuke (ep, -ESHUTDOWN);
337
338 #ifdef  USE_DMA
339         if (ep->dma >= 0) {
340                 *ep->reg_drcmr = 0;
341                 pxa_free_dma (ep->dma);
342                 ep->dma = -1;
343         }
344 #endif
345
346         /* flush fifo (mostly for IN buffers) */
347         pxa2xx_ep_fifo_flush (_ep);
348
349         ep->desc = NULL;
350         ep->stopped = 1;
351
352         local_irq_restore(flags);
353         DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
354         return 0;
355 }
356
357 /*-------------------------------------------------------------------------*/
358
359 /* for the pxa2xx, these can just wrap kmalloc/kfree.  gadget drivers
360  * must still pass correctly initialized endpoints, since other controller
361  * drivers may care about how it's currently set up (dma issues etc).
362  */
363
364 /*
365  *      pxa2xx_ep_alloc_request - allocate a request data structure
366  */
367 static struct usb_request *
368 pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
369 {
370         struct pxa2xx_request *req;
371
372         req = kzalloc(sizeof(*req), gfp_flags);
373         if (!req)
374                 return NULL;
375
376         INIT_LIST_HEAD (&req->queue);
377         return &req->req;
378 }
379
380
381 /*
382  *      pxa2xx_ep_free_request - deallocate a request data structure
383  */
384 static void
385 pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
386 {
387         struct pxa2xx_request   *req;
388
389         req = container_of (_req, struct pxa2xx_request, req);
390         WARN_ON (!list_empty (&req->queue));
391         kfree(req);
392 }
393
394
395 /* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
396  * no device-affinity and the heap works perfectly well for i/o buffers.
397  * It wastes much less memory than dma_alloc_coherent() would, and even
398  * prevents cacheline (32 bytes wide) sharing problems.
399  */
400 static void *
401 pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
402         dma_addr_t *dma, gfp_t gfp_flags)
403 {
404         char                    *retval;
405
406         retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
407         if (retval)
408 #ifdef  USE_DMA
409                 *dma = virt_to_bus (retval);
410 #else
411                 *dma = (dma_addr_t)~0;
412 #endif
413         return retval;
414 }
415
416 static void
417 pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
418                 unsigned bytes)
419 {
420         kfree (buf);
421 }
422
423 /*-------------------------------------------------------------------------*/
424
425 /*
426  *      done - retire a request; caller blocked irqs
427  */
428 static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
429 {
430         unsigned                stopped = ep->stopped;
431
432         list_del_init(&req->queue);
433
434         if (likely (req->req.status == -EINPROGRESS))
435                 req->req.status = status;
436         else
437                 status = req->req.status;
438
439         if (status && status != -ESHUTDOWN)
440                 DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
441                         ep->ep.name, &req->req, status,
442                         req->req.actual, req->req.length);
443
444         /* don't modify queue heads during completion callback */
445         ep->stopped = 1;
446         req->req.complete(&ep->ep, &req->req);
447         ep->stopped = stopped;
448 }
449
450
451 static inline void ep0_idle (struct pxa2xx_udc *dev)
452 {
453         dev->ep0state = EP0_IDLE;
454 }
455
456 static int
457 write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
458 {
459         u8              *buf;
460         unsigned        length, count;
461
462         buf = req->req.buf + req->req.actual;
463         prefetch(buf);
464
465         /* how big will this packet be? */
466         length = min(req->req.length - req->req.actual, max);
467         req->req.actual += length;
468
469         count = length;
470         while (likely(count--))
471                 *uddr = *buf++;
472
473         return length;
474 }
475
476 /*
477  * write to an IN endpoint fifo, as many packets as possible.
478  * irqs will use this to write the rest later.
479  * caller guarantees at least one packet buffer is ready (or a zlp).
480  */
481 static int
482 write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
483 {
484         unsigned                max;
485
486         max = le16_to_cpu(ep->desc->wMaxPacketSize);
487         do {
488                 unsigned        count;
489                 int             is_last, is_short;
490
491                 count = write_packet(ep->reg_uddr, req, max);
492
493                 /* last packet is usually short (or a zlp) */
494                 if (unlikely (count != max))
495                         is_last = is_short = 1;
496                 else {
497                         if (likely(req->req.length != req->req.actual)
498                                         || req->req.zero)
499                                 is_last = 0;
500                         else
501                                 is_last = 1;
502                         /* interrupt/iso maxpacket may not fill the fifo */
503                         is_short = unlikely (max < ep->fifo_size);
504                 }
505
506                 DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
507                         ep->ep.name, count,
508                         is_last ? "/L" : "", is_short ? "/S" : "",
509                         req->req.length - req->req.actual, req);
510
511                 /* let loose that packet. maybe try writing another one,
512                  * double buffering might work.  TSP, TPC, and TFS
513                  * bit values are the same for all normal IN endpoints.
514                  */
515                 *ep->reg_udccs = UDCCS_BI_TPC;
516                 if (is_short)
517                         *ep->reg_udccs = UDCCS_BI_TSP;
518
519                 /* requests complete when all IN data is in the FIFO */
520                 if (is_last) {
521                         done (ep, req, 0);
522                         if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
523                                 pio_irq_disable (ep->bEndpointAddress);
524 #ifdef USE_DMA
525                                 /* unaligned data and zlps couldn't use dma */
526                                 if (unlikely(!list_empty(&ep->queue))) {
527                                         req = list_entry(ep->queue.next,
528                                                 struct pxa2xx_request, queue);
529                                         kick_dma(ep,req);
530                                         return 0;
531                                 }
532 #endif
533                         }
534                         return 1;
535                 }
536
537                 // TODO experiment: how robust can fifo mode tweaking be?
538                 // double buffering is off in the default fifo mode, which
539                 // prevents TFS from being set here.
540
541         } while (*ep->reg_udccs & UDCCS_BI_TFS);
542         return 0;
543 }
544
545 /* caller asserts req->pending (ep0 irq status nyet cleared); starts
546  * ep0 data stage.  these chips want very simple state transitions.
547  */
548 static inline
549 void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
550 {
551         UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
552         USIR0 = USIR0_IR0;
553         dev->req_pending = 0;
554         DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
555                 __FUNCTION__, tag, UDCCS0, flags);
556 }
557
558 static int
559 write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
560 {
561         unsigned        count;
562         int             is_short;
563
564         count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
565         ep->dev->stats.write.bytes += count;
566
567         /* last packet "must be" short (or a zlp) */
568         is_short = (count != EP0_FIFO_SIZE);
569
570         DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
571                 req->req.length - req->req.actual, req);
572
573         if (unlikely (is_short)) {
574                 if (ep->dev->req_pending)
575                         ep0start(ep->dev, UDCCS0_IPR, "short IN");
576                 else
577                         UDCCS0 = UDCCS0_IPR;
578
579                 count = req->req.length;
580                 done (ep, req, 0);
581                 ep0_idle(ep->dev);
582 #ifndef CONFIG_ARCH_IXP4XX
583 #if 1
584                 /* This seems to get rid of lost status irqs in some cases:
585                  * host responds quickly, or next request involves config
586                  * change automagic, or should have been hidden, or ...
587                  *
588                  * FIXME get rid of all udelays possible...
589                  */
590                 if (count >= EP0_FIFO_SIZE) {
591                         count = 100;
592                         do {
593                                 if ((UDCCS0 & UDCCS0_OPR) != 0) {
594                                         /* clear OPR, generate ack */
595                                         UDCCS0 = UDCCS0_OPR;
596                                         break;
597                                 }
598                                 count--;
599                                 udelay(1);
600                         } while (count);
601                 }
602 #endif
603 #endif
604         } else if (ep->dev->req_pending)
605                 ep0start(ep->dev, 0, "IN");
606         return is_short;
607 }
608
609
610 /*
611  * read_fifo -  unload packet(s) from the fifo we use for usb OUT
612  * transfers and put them into the request.  caller should have made
613  * sure there's at least one packet ready.
614  *
615  * returns true if the request completed because of short packet or the
616  * request buffer having filled (and maybe overran till end-of-packet).
617  */
618 static int
619 read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
620 {
621         for (;;) {
622                 u32             udccs;
623                 u8              *buf;
624                 unsigned        bufferspace, count, is_short;
625
626                 /* make sure there's a packet in the FIFO.
627                  * UDCCS_{BO,IO}_RPC are all the same bit value.
628                  * UDCCS_{BO,IO}_RNE are all the same bit value.
629                  */
630                 udccs = *ep->reg_udccs;
631                 if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
632                         break;
633                 buf = req->req.buf + req->req.actual;
634                 prefetchw(buf);
635                 bufferspace = req->req.length - req->req.actual;
636
637                 /* read all bytes from this packet */
638                 if (likely (udccs & UDCCS_BO_RNE)) {
639                         count = 1 + (0x0ff & *ep->reg_ubcr);
640                         req->req.actual += min (count, bufferspace);
641                 } else /* zlp */
642                         count = 0;
643                 is_short = (count < ep->ep.maxpacket);
644                 DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
645                         ep->ep.name, udccs, count,
646                         is_short ? "/S" : "",
647                         req, req->req.actual, req->req.length);
648                 while (likely (count-- != 0)) {
649                         u8      byte = (u8) *ep->reg_uddr;
650
651                         if (unlikely (bufferspace == 0)) {
652                                 /* this happens when the driver's buffer
653                                  * is smaller than what the host sent.
654                                  * discard the extra data.
655                                  */
656                                 if (req->req.status != -EOVERFLOW)
657                                         DMSG("%s overflow %d\n",
658                                                 ep->ep.name, count);
659                                 req->req.status = -EOVERFLOW;
660                         } else {
661                                 *buf++ = byte;
662                                 bufferspace--;
663                         }
664                 }
665                 *ep->reg_udccs =  UDCCS_BO_RPC;
666                 /* RPC/RSP/RNE could now reflect the other packet buffer */
667
668                 /* iso is one request per packet */
669                 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
670                         if (udccs & UDCCS_IO_ROF)
671                                 req->req.status = -EHOSTUNREACH;
672                         /* more like "is_done" */
673                         is_short = 1;
674                 }
675
676                 /* completion */
677                 if (is_short || req->req.actual == req->req.length) {
678                         done (ep, req, 0);
679                         if (list_empty(&ep->queue))
680                                 pio_irq_disable (ep->bEndpointAddress);
681                         return 1;
682                 }
683
684                 /* finished that packet.  the next one may be waiting... */
685         }
686         return 0;
687 }
688
689 /*
690  * special ep0 version of the above.  no UBCR0 or double buffering; status
691  * handshaking is magic.  most device protocols don't need control-OUT.
692  * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
693  * protocols do use them.
694  */
695 static int
696 read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
697 {
698         u8              *buf, byte;
699         unsigned        bufferspace;
700
701         buf = req->req.buf + req->req.actual;
702         bufferspace = req->req.length - req->req.actual;
703
704         while (UDCCS0 & UDCCS0_RNE) {
705                 byte = (u8) UDDR0;
706
707                 if (unlikely (bufferspace == 0)) {
708                         /* this happens when the driver's buffer
709                          * is smaller than what the host sent.
710                          * discard the extra data.
711                          */
712                         if (req->req.status != -EOVERFLOW)
713                                 DMSG("%s overflow\n", ep->ep.name);
714                         req->req.status = -EOVERFLOW;
715                 } else {
716                         *buf++ = byte;
717                         req->req.actual++;
718                         bufferspace--;
719                 }
720         }
721
722         UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
723
724         /* completion */
725         if (req->req.actual >= req->req.length)
726                 return 1;
727
728         /* finished that packet.  the next one may be waiting... */
729         return 0;
730 }
731
732 #ifdef  USE_DMA
733
734 #define MAX_IN_DMA      ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
735
736 static void
737 start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in)
738 {
739         u32     dcmd = req->req.length;
740         u32     buf = req->req.dma;
741         u32     fifo = io_v2p ((u32)ep->reg_uddr);
742
743         /* caller guarantees there's a packet or more remaining
744          *  - IN may end with a short packet (TSP set separately),
745          *  - OUT is always full length
746          */
747         buf += req->req.actual;
748         dcmd -= req->req.actual;
749         ep->dma_fixup = 0;
750
751         /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
752         DCSR(ep->dma) = DCSR_NODESC;
753         if (is_in) {
754                 DSADR(ep->dma) = buf;
755                 DTADR(ep->dma) = fifo;
756                 if (dcmd > MAX_IN_DMA)
757                         dcmd = MAX_IN_DMA;
758                 else
759                         ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0;
760                 dcmd |= DCMD_BURST32 | DCMD_WIDTH1
761                         | DCMD_FLOWTRG | DCMD_INCSRCADDR;
762         } else {
763 #ifdef USE_OUT_DMA
764                 DSADR(ep->dma) = fifo;
765                 DTADR(ep->dma) = buf;
766                 if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
767                         dcmd = ep->ep.maxpacket;
768                 dcmd |= DCMD_BURST32 | DCMD_WIDTH1
769                         | DCMD_FLOWSRC | DCMD_INCTRGADDR;
770 #endif
771         }
772         DCMD(ep->dma) = dcmd;
773         DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC
774                 | (unlikely(is_in)
775                         ? DCSR_STOPIRQEN        /* use dma_nodesc_handler() */
776                         : 0);                   /* use handle_ep() */
777 }
778
779 static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req)
780 {
781         int     is_in = ep->bEndpointAddress & USB_DIR_IN;
782
783         if (is_in) {
784                 /* unaligned tx buffers and zlps only work with PIO */
785                 if ((req->req.dma & 0x0f) != 0
786                                 || unlikely((req->req.length - req->req.actual)
787                                                 == 0)) {
788                         pio_irq_enable(ep->bEndpointAddress);
789                         if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0)
790                                 (void) write_fifo(ep, req);
791                 } else {
792                         start_dma_nodesc(ep, req, USB_DIR_IN);
793                 }
794         } else {
795                 if ((req->req.length - req->req.actual) < ep->ep.maxpacket) {
796                         DMSG("%s short dma read...\n", ep->ep.name);
797                         /* we're always set up for pio out */
798                         read_fifo (ep, req);
799                 } else {
800                         *ep->reg_udccs = UDCCS_BO_DME
801                                 | (*ep->reg_udccs & UDCCS_BO_FST);
802                         start_dma_nodesc(ep, req, USB_DIR_OUT);
803                 }
804         }
805 }
806
807 static void cancel_dma(struct pxa2xx_ep *ep)
808 {
809         struct pxa2xx_request   *req;
810         u32                     tmp;
811
812         if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
813                 return;
814
815         DCSR(ep->dma) = 0;
816         while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
817                 cpu_relax();
818
819         req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
820         tmp = DCMD(ep->dma) & DCMD_LENGTH;
821         req->req.actual = req->req.length - (tmp & DCMD_LENGTH);
822
823         /* the last tx packet may be incomplete, so flush the fifo.
824          * FIXME correct req.actual if we can
825          */
826         if (ep->bEndpointAddress & USB_DIR_IN)
827                 *ep->reg_udccs = UDCCS_BI_FTF;
828 }
829
830 /* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */
831 static void dma_nodesc_handler(int dmach, void *_ep)
832 {
833         struct pxa2xx_ep        *ep = _ep;
834         struct pxa2xx_request   *req;
835         u32                     tmp, completed;
836
837         local_irq_disable();
838
839         req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
840
841         ep->dma_irqs++;
842         ep->dev->stats.irqs++;
843         HEX_DISPLAY(ep->dev->stats.irqs);
844
845         /* ack/clear */
846         tmp = DCSR(ep->dma);
847         DCSR(ep->dma) = tmp;
848         if ((tmp & DCSR_STOPSTATE) == 0
849                         || (DDADR(ep->dma) & DDADR_STOP) != 0) {
850                 DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n",
851                         ep->ep.name, DCSR(ep->dma), DDADR(ep->dma));
852                 goto done;
853         }
854         DCSR(ep->dma) = 0;      /* clear DCSR_STOPSTATE */
855
856         /* update transfer status */
857         completed = tmp & DCSR_BUSERR;
858         if (ep->bEndpointAddress & USB_DIR_IN)
859                 tmp = DSADR(ep->dma);
860         else
861                 tmp = DTADR(ep->dma);
862         req->req.actual = tmp - req->req.dma;
863
864         /* FIXME seems we sometimes see partial transfers... */
865
866         if (unlikely(completed != 0))
867                 req->req.status = -EIO;
868         else if (req->req.actual) {
869                 /* these registers have zeroes in low bits; they miscount
870                  * some (end-of-transfer) short packets:  tx 14 as tx 12
871                  */
872                 if (ep->dma_fixup)
873                         req->req.actual = min(req->req.actual + 3,
874                                                 req->req.length);
875
876                 tmp = (req->req.length - req->req.actual);
877                 completed = (tmp == 0);
878                 if (completed && (ep->bEndpointAddress & USB_DIR_IN)) {
879
880                         /* maybe validate final short packet ... */
881                         if ((req->req.actual % ep->ep.maxpacket) != 0)
882                                 *ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/;
883
884                         /* ... or zlp, using pio fallback */
885                         else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK
886                                         && req->req.zero) {
887                                 DMSG("%s zlp terminate ...\n", ep->ep.name);
888                                 completed = 0;
889                         }
890                 }
891         }
892
893         if (likely(completed)) {
894                 done(ep, req, 0);
895
896                 /* maybe re-activate after completion */
897                 if (ep->stopped || list_empty(&ep->queue))
898                         goto done;
899                 req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
900         }
901         kick_dma(ep, req);
902 done:
903         local_irq_enable();
904 }
905
906 #endif
907
908 /*-------------------------------------------------------------------------*/
909
910 static int
911 pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
912 {
913         struct pxa2xx_request   *req;
914         struct pxa2xx_ep        *ep;
915         struct pxa2xx_udc       *dev;
916         unsigned long           flags;
917
918         req = container_of(_req, struct pxa2xx_request, req);
919         if (unlikely (!_req || !_req->complete || !_req->buf
920                         || !list_empty(&req->queue))) {
921                 DMSG("%s, bad params\n", __FUNCTION__);
922                 return -EINVAL;
923         }
924
925         ep = container_of(_ep, struct pxa2xx_ep, ep);
926         if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
927                 DMSG("%s, bad ep\n", __FUNCTION__);
928                 return -EINVAL;
929         }
930
931         dev = ep->dev;
932         if (unlikely (!dev->driver
933                         || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
934                 DMSG("%s, bogus device state\n", __FUNCTION__);
935                 return -ESHUTDOWN;
936         }
937
938         /* iso is always one packet per request, that's the only way
939          * we can report per-packet status.  that also helps with dma.
940          */
941         if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
942                         && req->req.length > le16_to_cpu
943                                                 (ep->desc->wMaxPacketSize)))
944                 return -EMSGSIZE;
945
946 #ifdef  USE_DMA
947         // FIXME caller may already have done the dma mapping
948         if (ep->dma >= 0) {
949                 _req->dma = dma_map_single(dev->dev,
950                         _req->buf, _req->length,
951                         ((ep->bEndpointAddress & USB_DIR_IN) != 0)
952                                 ? DMA_TO_DEVICE
953                                 : DMA_FROM_DEVICE);
954         }
955 #endif
956
957         DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
958              _ep->name, _req, _req->length, _req->buf);
959
960         local_irq_save(flags);
961
962         _req->status = -EINPROGRESS;
963         _req->actual = 0;
964
965         /* kickstart this i/o queue? */
966         if (list_empty(&ep->queue) && !ep->stopped) {
967                 if (ep->desc == 0 /* ep0 */) {
968                         unsigned        length = _req->length;
969
970                         switch (dev->ep0state) {
971                         case EP0_IN_DATA_PHASE:
972                                 dev->stats.write.ops++;
973                                 if (write_ep0_fifo(ep, req))
974                                         req = NULL;
975                                 break;
976
977                         case EP0_OUT_DATA_PHASE:
978                                 dev->stats.read.ops++;
979                                 /* messy ... */
980                                 if (dev->req_config) {
981                                         DBG(DBG_VERBOSE, "ep0 config ack%s\n",
982                                                 dev->has_cfr ?  "" : " raced");
983                                         if (dev->has_cfr)
984                                                 UDCCFR = UDCCFR_AREN|UDCCFR_ACM
985                                                         |UDCCFR_MB1;
986                                         done(ep, req, 0);
987                                         dev->ep0state = EP0_END_XFER;
988                                         local_irq_restore (flags);
989                                         return 0;
990                                 }
991                                 if (dev->req_pending)
992                                         ep0start(dev, UDCCS0_IPR, "OUT");
993                                 if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
994                                                 && read_ep0_fifo(ep, req))) {
995                                         ep0_idle(dev);
996                                         done(ep, req, 0);
997                                         req = NULL;
998                                 }
999                                 break;
1000
1001                         default:
1002                                 DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
1003                                 local_irq_restore (flags);
1004                                 return -EL2HLT;
1005                         }
1006 #ifdef  USE_DMA
1007                 /* either start dma or prime pio pump */
1008                 } else if (ep->dma >= 0) {
1009                         kick_dma(ep, req);
1010 #endif
1011                 /* can the FIFO can satisfy the request immediately? */
1012                 } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
1013                         if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
1014                                         && write_fifo(ep, req))
1015                                 req = NULL;
1016                 } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
1017                                 && read_fifo(ep, req)) {
1018                         req = NULL;
1019                 }
1020
1021                 if (likely (req && ep->desc) && ep->dma < 0)
1022                         pio_irq_enable(ep->bEndpointAddress);
1023         }
1024
1025         /* pio or dma irq handler advances the queue. */
1026         if (likely (req != 0))
1027                 list_add_tail(&req->queue, &ep->queue);
1028         local_irq_restore(flags);
1029
1030         return 0;
1031 }
1032
1033
1034 /*
1035  *      nuke - dequeue ALL requests
1036  */
1037 static void nuke(struct pxa2xx_ep *ep, int status)
1038 {
1039         struct pxa2xx_request *req;
1040
1041         /* called with irqs blocked */
1042 #ifdef  USE_DMA
1043         if (ep->dma >= 0 && !ep->stopped)
1044                 cancel_dma(ep);
1045 #endif
1046         while (!list_empty(&ep->queue)) {
1047                 req = list_entry(ep->queue.next,
1048                                 struct pxa2xx_request,
1049                                 queue);
1050                 done(ep, req, status);
1051         }
1052         if (ep->desc)
1053                 pio_irq_disable (ep->bEndpointAddress);
1054 }
1055
1056
1057 /* dequeue JUST ONE request */
1058 static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
1059 {
1060         struct pxa2xx_ep        *ep;
1061         struct pxa2xx_request   *req;
1062         unsigned long           flags;
1063
1064         ep = container_of(_ep, struct pxa2xx_ep, ep);
1065         if (!_ep || ep->ep.name == ep0name)
1066                 return -EINVAL;
1067
1068         local_irq_save(flags);
1069
1070         /* make sure it's actually queued on this endpoint */
1071         list_for_each_entry (req, &ep->queue, queue) {
1072                 if (&req->req == _req)
1073                         break;
1074         }
1075         if (&req->req != _req) {
1076                 local_irq_restore(flags);
1077                 return -EINVAL;
1078         }
1079
1080 #ifdef  USE_DMA
1081         if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
1082                 cancel_dma(ep);
1083                 done(ep, req, -ECONNRESET);
1084                 /* restart i/o */
1085                 if (!list_empty(&ep->queue)) {
1086                         req = list_entry(ep->queue.next,
1087                                         struct pxa2xx_request, queue);
1088                         kick_dma(ep, req);
1089                 }
1090         } else
1091 #endif
1092                 done(ep, req, -ECONNRESET);
1093
1094         local_irq_restore(flags);
1095         return 0;
1096 }
1097
1098 /*-------------------------------------------------------------------------*/
1099
1100 static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
1101 {
1102         struct pxa2xx_ep        *ep;
1103         unsigned long           flags;
1104
1105         ep = container_of(_ep, struct pxa2xx_ep, ep);
1106         if (unlikely (!_ep
1107                         || (!ep->desc && ep->ep.name != ep0name))
1108                         || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
1109                 DMSG("%s, bad ep\n", __FUNCTION__);
1110                 return -EINVAL;
1111         }
1112         if (value == 0) {
1113                 /* this path (reset toggle+halt) is needed to implement
1114                  * SET_INTERFACE on normal hardware.  but it can't be
1115                  * done from software on the PXA UDC, and the hardware
1116                  * forgets to do it as part of SET_INTERFACE automagic.
1117                  */
1118                 DMSG("only host can clear %s halt\n", _ep->name);
1119                 return -EROFS;
1120         }
1121
1122         local_irq_save(flags);
1123
1124         if ((ep->bEndpointAddress & USB_DIR_IN) != 0
1125                         && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
1126                            || !list_empty(&ep->queue))) {
1127                 local_irq_restore(flags);
1128                 return -EAGAIN;
1129         }
1130
1131         /* FST bit is the same for control, bulk in, bulk out, interrupt in */
1132         *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
1133
1134         /* ep0 needs special care */
1135         if (!ep->desc) {
1136                 start_watchdog(ep->dev);
1137                 ep->dev->req_pending = 0;
1138                 ep->dev->ep0state = EP0_STALL;
1139
1140         /* and bulk/intr endpoints like dropping stalls too */
1141         } else {
1142                 unsigned i;
1143                 for (i = 0; i < 1000; i += 20) {
1144                         if (*ep->reg_udccs & UDCCS_BI_SST)
1145                                 break;
1146                         udelay(20);
1147                 }
1148         }
1149         local_irq_restore(flags);
1150
1151         DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
1152         return 0;
1153 }
1154
1155 static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
1156 {
1157         struct pxa2xx_ep        *ep;
1158
1159         ep = container_of(_ep, struct pxa2xx_ep, ep);
1160         if (!_ep) {
1161                 DMSG("%s, bad ep\n", __FUNCTION__);
1162                 return -ENODEV;
1163         }
1164         /* pxa can't report unclaimed bytes from IN fifos */
1165         if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
1166                 return -EOPNOTSUPP;
1167         if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
1168                         || (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
1169                 return 0;
1170         else
1171                 return (*ep->reg_ubcr & 0xfff) + 1;
1172 }
1173
1174 static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
1175 {
1176         struct pxa2xx_ep        *ep;
1177
1178         ep = container_of(_ep, struct pxa2xx_ep, ep);
1179         if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
1180                 DMSG("%s, bad ep\n", __FUNCTION__);
1181                 return;
1182         }
1183
1184         /* toggle and halt bits stay unchanged */
1185
1186         /* for OUT, just read and discard the FIFO contents. */
1187         if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
1188                 while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
1189                         (void) *ep->reg_uddr;
1190                 return;
1191         }
1192
1193         /* most IN status is the same, but ISO can't stall */
1194         *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
1195                 | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
1196                         ? 0 : UDCCS_BI_SST;
1197 }
1198
1199
1200 static struct usb_ep_ops pxa2xx_ep_ops = {
1201         .enable         = pxa2xx_ep_enable,
1202         .disable        = pxa2xx_ep_disable,
1203
1204         .alloc_request  = pxa2xx_ep_alloc_request,
1205         .free_request   = pxa2xx_ep_free_request,
1206
1207         .alloc_buffer   = pxa2xx_ep_alloc_buffer,
1208         .free_buffer    = pxa2xx_ep_free_buffer,
1209
1210         .queue          = pxa2xx_ep_queue,
1211         .dequeue        = pxa2xx_ep_dequeue,
1212
1213         .set_halt       = pxa2xx_ep_set_halt,
1214         .fifo_status    = pxa2xx_ep_fifo_status,
1215         .fifo_flush     = pxa2xx_ep_fifo_flush,
1216 };
1217
1218
1219 /* ---------------------------------------------------------------------------
1220  *      device-scoped parts of the api to the usb controller hardware
1221  * ---------------------------------------------------------------------------
1222  */
1223
1224 static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget)
1225 {
1226         return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
1227 }
1228
1229 static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
1230 {
1231         /* host may not have enabled remote wakeup */
1232         if ((UDCCS0 & UDCCS0_DRWF) == 0)
1233                 return -EHOSTUNREACH;
1234         udc_set_mask_UDCCR(UDCCR_RSM);
1235         return 0;
1236 }
1237
1238 static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *);
1239 static void udc_enable (struct pxa2xx_udc *);
1240 static void udc_disable(struct pxa2xx_udc *);
1241
1242 /* We disable the UDC -- and its 48 MHz clock -- whenever it's not
1243  * in active use.  
1244  */
1245 static int pullup(struct pxa2xx_udc *udc, int is_active)
1246 {
1247         is_active = is_active && udc->vbus && udc->pullup;
1248         DMSG("%s\n", is_active ? "active" : "inactive");
1249         if (is_active)
1250                 udc_enable(udc);
1251         else {
1252                 if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
1253                         DMSG("disconnect %s\n", udc->driver
1254                                 ? udc->driver->driver.name
1255                                 : "(no driver)");
1256                         stop_activity(udc, udc->driver);
1257                 }
1258                 udc_disable(udc);
1259         }
1260         return 0;
1261 }
1262
1263 /* VBUS reporting logically comes from a transceiver */
1264 static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1265 {
1266         struct pxa2xx_udc       *udc;
1267
1268         udc = container_of(_gadget, struct pxa2xx_udc, gadget);
1269         udc->vbus = is_active = (is_active != 0);
1270         DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
1271         pullup(udc, is_active);
1272         return 0;
1273 }
1274
1275 /* drivers may have software control over D+ pullup */
1276 static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
1277 {
1278         struct pxa2xx_udc       *udc;
1279
1280         udc = container_of(_gadget, struct pxa2xx_udc, gadget);
1281
1282         /* not all boards support pullup control */
1283         if (!udc->mach->udc_command)
1284                 return -EOPNOTSUPP;
1285
1286         is_active = (is_active != 0);
1287         udc->pullup = is_active;
1288         pullup(udc, is_active);
1289         return 0;
1290 }
1291
1292 static const struct usb_gadget_ops pxa2xx_udc_ops = {
1293         .get_frame      = pxa2xx_udc_get_frame,
1294         .wakeup         = pxa2xx_udc_wakeup,
1295         .vbus_session   = pxa2xx_udc_vbus_session,
1296         .pullup         = pxa2xx_udc_pullup,
1297
1298         // .vbus_draw ... boards may consume current from VBUS, up to
1299         // 100-500mA based on config.  the 500uA suspend ceiling means
1300         // that exclusively vbus-powered PXA designs violate USB specs.
1301 };
1302
1303 /*-------------------------------------------------------------------------*/
1304
1305 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1306
1307 static const char proc_node_name [] = "driver/udc";
1308
1309 static int
1310 udc_proc_read(char *page, char **start, off_t off, int count,
1311                 int *eof, void *_dev)
1312 {
1313         char                    *buf = page;
1314         struct pxa2xx_udc       *dev = _dev;
1315         char                    *next = buf;
1316         unsigned                size = count;
1317         unsigned long           flags;
1318         int                     i, t;
1319         u32                     tmp;
1320
1321         if (off != 0)
1322                 return 0;
1323
1324         local_irq_save(flags);
1325
1326         /* basic device status */
1327         t = scnprintf(next, size, DRIVER_DESC "\n"
1328                 "%s version: %s\nGadget driver: %s\nHost %s\n\n",
1329                 driver_name, DRIVER_VERSION SIZE_STR DMASTR,
1330                 dev->driver ? dev->driver->driver.name : "(none)",
1331                 is_vbus_present() ? "full speed" : "disconnected");
1332         size -= t;
1333         next += t;
1334
1335         /* registers for device and ep0 */
1336         t = scnprintf(next, size,
1337                 "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
1338                 UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
1339         size -= t;
1340         next += t;
1341
1342         tmp = UDCCR;
1343         t = scnprintf(next, size,
1344                 "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
1345                 (tmp & UDCCR_REM) ? " rem" : "",
1346                 (tmp & UDCCR_RSTIR) ? " rstir" : "",
1347                 (tmp & UDCCR_SRM) ? " srm" : "",
1348                 (tmp & UDCCR_SUSIR) ? " susir" : "",
1349                 (tmp & UDCCR_RESIR) ? " resir" : "",
1350                 (tmp & UDCCR_RSM) ? " rsm" : "",
1351                 (tmp & UDCCR_UDA) ? " uda" : "",
1352                 (tmp & UDCCR_UDE) ? " ude" : "");
1353         size -= t;
1354         next += t;
1355
1356         tmp = UDCCS0;
1357         t = scnprintf(next, size,
1358                 "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
1359                 (tmp & UDCCS0_SA) ? " sa" : "",
1360                 (tmp & UDCCS0_RNE) ? " rne" : "",
1361                 (tmp & UDCCS0_FST) ? " fst" : "",
1362                 (tmp & UDCCS0_SST) ? " sst" : "",
1363                 (tmp & UDCCS0_DRWF) ? " dwrf" : "",
1364                 (tmp & UDCCS0_FTF) ? " ftf" : "",
1365                 (tmp & UDCCS0_IPR) ? " ipr" : "",
1366                 (tmp & UDCCS0_OPR) ? " opr" : "");
1367         size -= t;
1368         next += t;
1369
1370         if (dev->has_cfr) {
1371                 tmp = UDCCFR;
1372                 t = scnprintf(next, size,
1373                         "udccfr %02X =%s%s\n", tmp,
1374                         (tmp & UDCCFR_AREN) ? " aren" : "",
1375                         (tmp & UDCCFR_ACM) ? " acm" : "");
1376                 size -= t;
1377                 next += t;
1378         }
1379
1380         if (!is_vbus_present() || !dev->driver)
1381                 goto done;
1382
1383         t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
1384                 dev->stats.write.bytes, dev->stats.write.ops,
1385                 dev->stats.read.bytes, dev->stats.read.ops,
1386                 dev->stats.irqs);
1387         size -= t;
1388         next += t;
1389
1390         /* dump endpoint queues */
1391         for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1392                 struct pxa2xx_ep        *ep = &dev->ep [i];
1393                 struct pxa2xx_request   *req;
1394                 int                     t;
1395
1396                 if (i != 0) {
1397                         const struct usb_endpoint_descriptor    *d;
1398
1399                         d = ep->desc;
1400                         if (!d)
1401                                 continue;
1402                         tmp = *dev->ep [i].reg_udccs;
1403                         t = scnprintf(next, size,
1404                                 "%s max %d %s udccs %02x irqs %lu/%lu\n",
1405                                 ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
1406                                 (ep->dma >= 0) ? "dma" : "pio", tmp,
1407                                 ep->pio_irqs, ep->dma_irqs);
1408                         /* TODO translate all five groups of udccs bits! */
1409
1410                 } else /* ep0 should only have one transfer queued */
1411                         t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
1412                                 ep->pio_irqs);
1413                 if (t <= 0 || t > size)
1414                         goto done;
1415                 size -= t;
1416                 next += t;
1417
1418                 if (list_empty(&ep->queue)) {
1419                         t = scnprintf(next, size, "\t(nothing queued)\n");
1420                         if (t <= 0 || t > size)
1421                                 goto done;
1422                         size -= t;
1423                         next += t;
1424                         continue;
1425                 }
1426                 list_for_each_entry(req, &ep->queue, queue) {
1427 #ifdef  USE_DMA
1428                         if (ep->dma >= 0 && req->queue.prev == &ep->queue)
1429                                 t = scnprintf(next, size,
1430                                         "\treq %p len %d/%d "
1431                                         "buf %p (dma%d dcmd %08x)\n",
1432                                         &req->req, req->req.actual,
1433                                         req->req.length, req->req.buf,
1434                                         ep->dma, DCMD(ep->dma)
1435                                         // low 13 bits == bytes-to-go
1436                                         );
1437                         else
1438 #endif
1439                                 t = scnprintf(next, size,
1440                                         "\treq %p len %d/%d buf %p\n",
1441                                         &req->req, req->req.actual,
1442                                         req->req.length, req->req.buf);
1443                         if (t <= 0 || t > size)
1444                                 goto done;
1445                         size -= t;
1446                         next += t;
1447                 }
1448         }
1449
1450 done:
1451         local_irq_restore(flags);
1452         *eof = 1;
1453         return count - size;
1454 }
1455
1456 #define create_proc_files() \
1457         create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
1458 #define remove_proc_files() \
1459         remove_proc_entry(proc_node_name, NULL)
1460
1461 #else   /* !CONFIG_USB_GADGET_DEBUG_FILES */
1462
1463 #define create_proc_files() do {} while (0)
1464 #define remove_proc_files() do {} while (0)
1465
1466 #endif  /* CONFIG_USB_GADGET_DEBUG_FILES */
1467
1468 /* "function" sysfs attribute */
1469 static ssize_t
1470 show_function (struct device *_dev, struct device_attribute *attr, char *buf)
1471 {
1472         struct pxa2xx_udc       *dev = dev_get_drvdata (_dev);
1473
1474         if (!dev->driver
1475                         || !dev->driver->function
1476                         || strlen (dev->driver->function) > PAGE_SIZE)
1477                 return 0;
1478         return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
1479 }
1480 static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
1481
1482 /*-------------------------------------------------------------------------*/
1483
1484 /*
1485  *      udc_disable - disable USB device controller
1486  */
1487 static void udc_disable(struct pxa2xx_udc *dev)
1488 {
1489         /* block all irqs */
1490         udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
1491         UICR0 = UICR1 = 0xff;
1492         UFNRH = UFNRH_SIM;
1493
1494         /* if hardware supports it, disconnect from usb */
1495         pullup_off();
1496
1497         udc_clear_mask_UDCCR(UDCCR_UDE);
1498
1499 #ifdef  CONFIG_ARCH_PXA
1500         /* Disable clock for USB device */
1501         pxa_set_cken(CKEN11_USB, 0);
1502 #endif
1503
1504         ep0_idle (dev);
1505         dev->gadget.speed = USB_SPEED_UNKNOWN;
1506         LED_CONNECTED_OFF;
1507 }
1508
1509
1510 /*
1511  *      udc_reinit - initialize software state
1512  */
1513 static void udc_reinit(struct pxa2xx_udc *dev)
1514 {
1515         u32     i;
1516
1517         /* device/ep0 records init */
1518         INIT_LIST_HEAD (&dev->gadget.ep_list);
1519         INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
1520         dev->ep0state = EP0_IDLE;
1521
1522         /* basic endpoint records init */
1523         for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1524                 struct pxa2xx_ep *ep = &dev->ep[i];
1525
1526                 if (i != 0)
1527                         list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
1528
1529                 ep->desc = NULL;
1530                 ep->stopped = 0;
1531                 INIT_LIST_HEAD (&ep->queue);
1532                 ep->pio_irqs = ep->dma_irqs = 0;
1533         }
1534
1535         /* the rest was statically initialized, and is read-only */
1536 }
1537
1538 /* until it's enabled, this UDC should be completely invisible
1539  * to any USB host.
1540  */
1541 static void udc_enable (struct pxa2xx_udc *dev)
1542 {
1543         udc_clear_mask_UDCCR(UDCCR_UDE);
1544
1545 #ifdef  CONFIG_ARCH_PXA
1546         /* Enable clock for USB device */
1547         pxa_set_cken(CKEN11_USB, 1);
1548         udelay(5);
1549 #endif
1550
1551         /* try to clear these bits before we enable the udc */
1552         udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
1553
1554         ep0_idle(dev);
1555         dev->gadget.speed = USB_SPEED_UNKNOWN;
1556         dev->stats.irqs = 0;
1557
1558         /*
1559          * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
1560          * - enable UDC
1561          * - if RESET is already in progress, ack interrupt
1562          * - unmask reset interrupt
1563          */
1564         udc_set_mask_UDCCR(UDCCR_UDE);
1565         if (!(UDCCR & UDCCR_UDA))
1566                 udc_ack_int_UDCCR(UDCCR_RSTIR);
1567
1568         if (dev->has_cfr /* UDC_RES2 is defined */) {
1569                 /* pxa255 (a0+) can avoid a set_config race that could
1570                  * prevent gadget drivers from configuring correctly
1571                  */
1572                 UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
1573         } else {
1574                 /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
1575                  * which could result in missing packets and interrupts.
1576                  * supposedly one bit per endpoint, controlling whether it
1577                  * double buffers or not; ACM/AREN bits fit into the holes.
1578                  * zero bits (like USIR0_IRx) disable double buffering.
1579                  */
1580                 UDC_RES1 = 0x00;
1581                 UDC_RES2 = 0x00;
1582         }
1583
1584 #ifdef  DISABLE_TEST_MODE
1585         /* "test mode" seems to have become the default in later chip
1586          * revs, preventing double buffering (and invalidating docs).
1587          * this EXPERIMENT enables it for bulk endpoints by tweaking
1588          * undefined/reserved register bits (that other drivers clear).
1589          * Belcarra code comments noted this usage.
1590          */
1591         if (fifo_mode & 1) {    /* IN endpoints */
1592                 UDC_RES1 |= USIR0_IR1|USIR0_IR6;
1593                 UDC_RES2 |= USIR1_IR11;
1594         }
1595         if (fifo_mode & 2) {    /* OUT endpoints */
1596                 UDC_RES1 |= USIR0_IR2|USIR0_IR7;
1597                 UDC_RES2 |= USIR1_IR12;
1598         }
1599 #endif
1600
1601         /* enable suspend/resume and reset irqs */
1602         udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
1603
1604         /* enable ep0 irqs */
1605         UICR0 &= ~UICR0_IM0;
1606
1607         /* if hardware supports it, pullup D+ and wait for reset */
1608         pullup_on();
1609 }
1610
1611
1612 /* when a driver is successfully registered, it will receive
1613  * control requests including set_configuration(), which enables
1614  * non-control requests.  then usb traffic follows until a
1615  * disconnect is reported.  then a host may connect again, or
1616  * the driver might get unbound.
1617  */
1618 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1619 {
1620         struct pxa2xx_udc       *dev = the_controller;
1621         int                     retval;
1622
1623         if (!driver
1624                         || driver->speed < USB_SPEED_FULL
1625                         || !driver->bind
1626                         || !driver->disconnect
1627                         || !driver->setup)
1628                 return -EINVAL;
1629         if (!dev)
1630                 return -ENODEV;
1631         if (dev->driver)
1632                 return -EBUSY;
1633
1634         /* first hook up the driver ... */
1635         dev->driver = driver;
1636         dev->gadget.dev.driver = &driver->driver;
1637         dev->pullup = 1;
1638
1639         device_add (&dev->gadget.dev);
1640         retval = driver->bind(&dev->gadget);
1641         if (retval) {
1642                 DMSG("bind to driver %s --> error %d\n",
1643                                 driver->driver.name, retval);
1644                 device_del (&dev->gadget.dev);
1645
1646                 dev->driver = NULL;
1647                 dev->gadget.dev.driver = NULL;
1648                 return retval;
1649         }
1650         device_create_file(dev->dev, &dev_attr_function);
1651
1652         /* ... then enable host detection and ep0; and we're ready
1653          * for set_configuration as well as eventual disconnect.
1654          */
1655         DMSG("registered gadget driver '%s'\n", driver->driver.name);
1656         pullup(dev, 1);
1657         dump_state(dev);
1658         return 0;
1659 }
1660 EXPORT_SYMBOL(usb_gadget_register_driver);
1661
1662 static void
1663 stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
1664 {
1665         int i;
1666
1667         /* don't disconnect drivers more than once */
1668         if (dev->gadget.speed == USB_SPEED_UNKNOWN)
1669                 driver = NULL;
1670         dev->gadget.speed = USB_SPEED_UNKNOWN;
1671
1672         /* prevent new request submissions, kill any outstanding requests  */
1673         for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
1674                 struct pxa2xx_ep *ep = &dev->ep[i];
1675
1676                 ep->stopped = 1;
1677                 nuke(ep, -ESHUTDOWN);
1678         }
1679         del_timer_sync(&dev->timer);
1680
1681         /* report disconnect; the driver is already quiesced */
1682         LED_CONNECTED_OFF;
1683         if (driver)
1684                 driver->disconnect(&dev->gadget);
1685
1686         /* re-init driver-visible data structures */
1687         udc_reinit(dev);
1688 }
1689
1690 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1691 {
1692         struct pxa2xx_udc       *dev = the_controller;
1693
1694         if (!dev)
1695                 return -ENODEV;
1696         if (!driver || driver != dev->driver || !driver->unbind)
1697                 return -EINVAL;
1698
1699         local_irq_disable();
1700         pullup(dev, 0);
1701         stop_activity(dev, driver);
1702         local_irq_enable();
1703
1704         driver->unbind(&dev->gadget);
1705         dev->driver = NULL;
1706
1707         device_del (&dev->gadget.dev);
1708         device_remove_file(dev->dev, &dev_attr_function);
1709
1710         DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
1711         dump_state(dev);
1712         return 0;
1713 }
1714 EXPORT_SYMBOL(usb_gadget_unregister_driver);
1715
1716
1717 /*-------------------------------------------------------------------------*/
1718
1719 #ifdef CONFIG_ARCH_LUBBOCK
1720
1721 /* Lubbock has separate connect and disconnect irqs.  More typical designs
1722  * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
1723  */
1724
1725 static irqreturn_t
1726 lubbock_vbus_irq(int irq, void *_dev)
1727 {
1728         struct pxa2xx_udc       *dev = _dev;
1729         int                     vbus;
1730
1731         dev->stats.irqs++;
1732         HEX_DISPLAY(dev->stats.irqs);
1733         switch (irq) {
1734         case LUBBOCK_USB_IRQ:
1735                 LED_CONNECTED_ON;
1736                 vbus = 1;
1737                 disable_irq(LUBBOCK_USB_IRQ);
1738                 enable_irq(LUBBOCK_USB_DISC_IRQ);
1739                 break;
1740         case LUBBOCK_USB_DISC_IRQ:
1741                 LED_CONNECTED_OFF;
1742                 vbus = 0;
1743                 disable_irq(LUBBOCK_USB_DISC_IRQ);
1744                 enable_irq(LUBBOCK_USB_IRQ);
1745                 break;
1746         default:
1747                 return IRQ_NONE;
1748         }
1749
1750         pxa2xx_udc_vbus_session(&dev->gadget, vbus);
1751         return IRQ_HANDLED;
1752 }
1753
1754 #endif
1755
1756 static irqreturn_t udc_vbus_irq(int irq, void *_dev)
1757 {
1758         struct pxa2xx_udc       *dev = _dev;
1759         int                     vbus = pxa_gpio_get(dev->mach->gpio_vbus);
1760
1761         pxa2xx_udc_vbus_session(&dev->gadget, vbus);
1762         return IRQ_HANDLED;
1763 }
1764
1765
1766 /*-------------------------------------------------------------------------*/
1767
1768 static inline void clear_ep_state (struct pxa2xx_udc *dev)
1769 {
1770         unsigned i;
1771
1772         /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
1773          * fifos, and pending transactions mustn't be continued in any case.
1774          */
1775         for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
1776                 nuke(&dev->ep[i], -ECONNABORTED);
1777 }
1778
1779 static void udc_watchdog(unsigned long _dev)
1780 {
1781         struct pxa2xx_udc       *dev = (void *)_dev;
1782
1783         local_irq_disable();
1784         if (dev->ep0state == EP0_STALL
1785                         && (UDCCS0 & UDCCS0_FST) == 0
1786                         && (UDCCS0 & UDCCS0_SST) == 0) {
1787                 UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
1788                 DBG(DBG_VERBOSE, "ep0 re-stall\n");
1789                 start_watchdog(dev);
1790         }
1791         local_irq_enable();
1792 }
1793
1794 static void handle_ep0 (struct pxa2xx_udc *dev)
1795 {
1796         u32                     udccs0 = UDCCS0;
1797         struct pxa2xx_ep        *ep = &dev->ep [0];
1798         struct pxa2xx_request   *req;
1799         union {
1800                 struct usb_ctrlrequest  r;
1801                 u8                      raw [8];
1802                 u32                     word [2];
1803         } u;
1804
1805         if (list_empty(&ep->queue))
1806                 req = NULL;
1807         else
1808                 req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
1809
1810         /* clear stall status */
1811         if (udccs0 & UDCCS0_SST) {
1812                 nuke(ep, -EPIPE);
1813                 UDCCS0 = UDCCS0_SST;
1814                 del_timer(&dev->timer);
1815                 ep0_idle(dev);
1816         }
1817
1818         /* previous request unfinished?  non-error iff back-to-back ... */
1819         if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
1820                 nuke(ep, 0);
1821                 del_timer(&dev->timer);
1822                 ep0_idle(dev);
1823         }
1824
1825         switch (dev->ep0state) {
1826         case EP0_IDLE:
1827                 /* late-breaking status? */
1828                 udccs0 = UDCCS0;
1829
1830                 /* start control request? */
1831                 if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
1832                                 == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
1833                         int i;
1834
1835                         nuke (ep, -EPROTO);
1836
1837                         /* read SETUP packet */
1838                         for (i = 0; i < 8; i++) {
1839                                 if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
1840 bad_setup:
1841                                         DMSG("SETUP %d!\n", i);
1842                                         goto stall;
1843                                 }
1844                                 u.raw [i] = (u8) UDDR0;
1845                         }
1846                         if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
1847                                 goto bad_setup;
1848
1849 got_setup:
1850                         DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
1851                                 u.r.bRequestType, u.r.bRequest,
1852                                 le16_to_cpu(u.r.wValue),
1853                                 le16_to_cpu(u.r.wIndex),
1854                                 le16_to_cpu(u.r.wLength));
1855
1856                         /* cope with automagic for some standard requests. */
1857                         dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
1858                                                 == USB_TYPE_STANDARD;
1859                         dev->req_config = 0;
1860                         dev->req_pending = 1;
1861                         switch (u.r.bRequest) {
1862                         /* hardware restricts gadget drivers here! */
1863                         case USB_REQ_SET_CONFIGURATION:
1864                                 if (u.r.bRequestType == USB_RECIP_DEVICE) {
1865                                         /* reflect hardware's automagic
1866                                          * up to the gadget driver.
1867                                          */
1868 config_change:
1869                                         dev->req_config = 1;
1870                                         clear_ep_state(dev);
1871                                         /* if !has_cfr, there's no synch
1872                                          * else use AREN (later) not SA|OPR
1873                                          * USIR0_IR0 acts edge sensitive
1874                                          */
1875                                 }
1876                                 break;
1877                         /* ... and here, even more ... */
1878                         case USB_REQ_SET_INTERFACE:
1879                                 if (u.r.bRequestType == USB_RECIP_INTERFACE) {
1880                                         /* udc hardware is broken by design:
1881                                          *  - altsetting may only be zero;
1882                                          *  - hw resets all interfaces' eps;
1883                                          *  - ep reset doesn't include halt(?).
1884                                          */
1885                                         DMSG("broken set_interface (%d/%d)\n",
1886                                                 le16_to_cpu(u.r.wIndex),
1887                                                 le16_to_cpu(u.r.wValue));
1888                                         goto config_change;
1889                                 }
1890                                 break;
1891                         /* hardware was supposed to hide this */
1892                         case USB_REQ_SET_ADDRESS:
1893                                 if (u.r.bRequestType == USB_RECIP_DEVICE) {
1894                                         ep0start(dev, 0, "address");
1895                                         return;
1896                                 }
1897                                 break;
1898                         }
1899
1900                         if (u.r.bRequestType & USB_DIR_IN)
1901                                 dev->ep0state = EP0_IN_DATA_PHASE;
1902                         else
1903                                 dev->ep0state = EP0_OUT_DATA_PHASE;
1904
1905                         i = dev->driver->setup(&dev->gadget, &u.r);
1906                         if (i < 0) {
1907                                 /* hardware automagic preventing STALL... */
1908                                 if (dev->req_config) {
1909                                         /* hardware sometimes neglects to tell
1910                                          * tell us about config change events,
1911                                          * so later ones may fail...
1912                                          */
1913                                         WARN("config change %02x fail %d?\n",
1914                                                 u.r.bRequest, i);
1915                                         return;
1916                                         /* TODO experiment:  if has_cfr,
1917                                          * hardware didn't ACK; maybe we
1918                                          * could actually STALL!
1919                                          */
1920                                 }
1921                                 DBG(DBG_VERBOSE, "protocol STALL, "
1922                                         "%02x err %d\n", UDCCS0, i);
1923 stall:
1924                                 /* the watchdog timer helps deal with cases
1925                                  * where udc seems to clear FST wrongly, and
1926                                  * then NAKs instead of STALLing.
1927                                  */
1928                                 ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
1929                                 start_watchdog(dev);
1930                                 dev->ep0state = EP0_STALL;
1931
1932                         /* deferred i/o == no response yet */
1933                         } else if (dev->req_pending) {
1934                                 if (likely(dev->ep0state == EP0_IN_DATA_PHASE
1935                                                 || dev->req_std || u.r.wLength))
1936                                         ep0start(dev, 0, "defer");
1937                                 else
1938                                         ep0start(dev, UDCCS0_IPR, "defer/IPR");
1939                         }
1940
1941                         /* expect at least one data or status stage irq */
1942                         return;
1943
1944                 } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
1945                                 == (UDCCS0_OPR|UDCCS0_SA))) {
1946                         unsigned i;
1947
1948                         /* pxa210/250 erratum 131 for B0/B1 says RNE lies.
1949                          * still observed on a pxa255 a0.
1950                          */
1951                         DBG(DBG_VERBOSE, "e131\n");
1952                         nuke(ep, -EPROTO);
1953
1954                         /* read SETUP data, but don't trust it too much */
1955                         for (i = 0; i < 8; i++)
1956                                 u.raw [i] = (u8) UDDR0;
1957                         if ((u.r.bRequestType & USB_RECIP_MASK)
1958                                         > USB_RECIP_OTHER)
1959                                 goto stall;
1960                         if (u.word [0] == 0 && u.word [1] == 0)
1961                                 goto stall;
1962                         goto got_setup;
1963                 } else {
1964                         /* some random early IRQ:
1965                          * - we acked FST
1966                          * - IPR cleared
1967                          * - OPR got set, without SA (likely status stage)
1968                          */
1969                         UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
1970                 }
1971                 break;
1972         case EP0_IN_DATA_PHASE:                 /* GET_DESCRIPTOR etc */
1973                 if (udccs0 & UDCCS0_OPR) {
1974                         UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
1975                         DBG(DBG_VERBOSE, "ep0in premature status\n");
1976                         if (req)
1977                                 done(ep, req, 0);
1978                         ep0_idle(dev);
1979                 } else /* irq was IPR clearing */ {
1980                         if (req) {
1981                                 /* this IN packet might finish the request */
1982                                 (void) write_ep0_fifo(ep, req);
1983                         } /* else IN token before response was written */
1984                 }
1985                 break;
1986         case EP0_OUT_DATA_PHASE:                /* SET_DESCRIPTOR etc */
1987                 if (udccs0 & UDCCS0_OPR) {
1988                         if (req) {
1989                                 /* this OUT packet might finish the request */
1990                                 if (read_ep0_fifo(ep, req))
1991                                         done(ep, req, 0);
1992                                 /* else more OUT packets expected */
1993                         } /* else OUT token before read was issued */
1994                 } else /* irq was IPR clearing */ {
1995                         DBG(DBG_VERBOSE, "ep0out premature status\n");
1996                         if (req)
1997                                 done(ep, req, 0);
1998                         ep0_idle(dev);
1999                 }
2000                 break;
2001         case EP0_END_XFER:
2002                 if (req)
2003                         done(ep, req, 0);
2004                 /* ack control-IN status (maybe in-zlp was skipped)
2005                  * also appears after some config change events.
2006                  */
2007                 if (udccs0 & UDCCS0_OPR)
2008                         UDCCS0 = UDCCS0_OPR;
2009                 ep0_idle(dev);
2010                 break;
2011         case EP0_STALL:
2012                 UDCCS0 = UDCCS0_FST;
2013                 break;
2014         }
2015         USIR0 = USIR0_IR0;
2016 }
2017
2018 static void handle_ep(struct pxa2xx_ep *ep)
2019 {
2020         struct pxa2xx_request   *req;
2021         int                     is_in = ep->bEndpointAddress & USB_DIR_IN;
2022         int                     completed;
2023         u32                     udccs, tmp;
2024
2025         do {
2026                 completed = 0;
2027                 if (likely (!list_empty(&ep->queue)))
2028                         req = list_entry(ep->queue.next,
2029                                         struct pxa2xx_request, queue);
2030                 else
2031                         req = NULL;
2032
2033                 // TODO check FST handling
2034
2035                 udccs = *ep->reg_udccs;
2036                 if (unlikely(is_in)) {  /* irq from TPC, SST, or (ISO) TUR */
2037                         tmp = UDCCS_BI_TUR;
2038                         if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
2039                                 tmp |= UDCCS_BI_SST;
2040                         tmp &= udccs;
2041                         if (likely (tmp))
2042                                 *ep->reg_udccs = tmp;
2043                         if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
2044                                 completed = write_fifo(ep, req);
2045
2046                 } else {        /* irq from RPC (or for ISO, ROF) */
2047                         if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
2048                                 tmp = UDCCS_BO_SST | UDCCS_BO_DME;
2049                         else
2050                                 tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
2051                         tmp &= udccs;
2052                         if (likely(tmp))
2053                                 *ep->reg_udccs = tmp;
2054
2055                         /* fifos can hold packets, ready for reading... */
2056                         if (likely(req)) {
2057 #ifdef USE_OUT_DMA
2058 // TODO didn't yet debug out-dma.  this approach assumes
2059 // the worst about short packets and RPC; it might be better.
2060
2061                                 if (likely(ep->dma >= 0)) {
2062                                         if (!(udccs & UDCCS_BO_RSP)) {
2063                                                 *ep->reg_udccs = UDCCS_BO_RPC;
2064                                                 ep->dma_irqs++;
2065                                                 return;
2066                                         }
2067                                 }
2068 #endif
2069                                 completed = read_fifo(ep, req);
2070                         } else
2071                                 pio_irq_disable (ep->bEndpointAddress);
2072                 }
2073                 ep->pio_irqs++;
2074         } while (completed);
2075 }
2076
2077 /*
2078  *      pxa2xx_udc_irq - interrupt handler
2079  *
2080  * avoid delays in ep0 processing. the control handshaking isn't always
2081  * under software control (pxa250c0 and the pxa255 are better), and delays
2082  * could cause usb protocol errors.
2083  */
2084 static irqreturn_t
2085 pxa2xx_udc_irq(int irq, void *_dev)
2086 {
2087         struct pxa2xx_udc       *dev = _dev;
2088         int                     handled;
2089
2090         dev->stats.irqs++;
2091         HEX_DISPLAY(dev->stats.irqs);
2092         do {
2093                 u32             udccr = UDCCR;
2094
2095                 handled = 0;
2096
2097                 /* SUSpend Interrupt Request */
2098                 if (unlikely(udccr & UDCCR_SUSIR)) {
2099                         udc_ack_int_UDCCR(UDCCR_SUSIR);
2100                         handled = 1;
2101                         DBG(DBG_VERBOSE, "USB suspend%s\n", is_vbus_present()
2102                                 ? "" : "+disconnect");
2103
2104                         if (!is_vbus_present())
2105                                 stop_activity(dev, dev->driver);
2106                         else if (dev->gadget.speed != USB_SPEED_UNKNOWN
2107                                         && dev->driver
2108                                         && dev->driver->suspend)
2109                                 dev->driver->suspend(&dev->gadget);
2110                         ep0_idle (dev);
2111                 }
2112
2113                 /* RESume Interrupt Request */
2114                 if (unlikely(udccr & UDCCR_RESIR)) {
2115                         udc_ack_int_UDCCR(UDCCR_RESIR);
2116                         handled = 1;
2117                         DBG(DBG_VERBOSE, "USB resume\n");
2118
2119                         if (dev->gadget.speed != USB_SPEED_UNKNOWN
2120                                         && dev->driver
2121                                         && dev->driver->resume
2122                                         && is_vbus_present())
2123                                 dev->driver->resume(&dev->gadget);
2124                 }
2125
2126                 /* ReSeT Interrupt Request - USB reset */
2127                 if (unlikely(udccr & UDCCR_RSTIR)) {
2128                         udc_ack_int_UDCCR(UDCCR_RSTIR);
2129                         handled = 1;
2130
2131                         if ((UDCCR & UDCCR_UDA) == 0) {
2132                                 DBG(DBG_VERBOSE, "USB reset start\n");
2133
2134                                 /* reset driver and endpoints,
2135                                  * in case that's not yet done
2136                                  */
2137                                 stop_activity (dev, dev->driver);
2138
2139                         } else {
2140                                 DBG(DBG_VERBOSE, "USB reset end\n");
2141                                 dev->gadget.speed = USB_SPEED_FULL;
2142                                 LED_CONNECTED_ON;
2143                                 memset(&dev->stats, 0, sizeof dev->stats);
2144                                 /* driver and endpoints are still reset */
2145                         }
2146
2147                 } else {
2148                         u32     usir0 = USIR0 & ~UICR0;
2149                         u32     usir1 = USIR1 & ~UICR1;
2150                         int     i;
2151
2152                         if (unlikely (!usir0 && !usir1))
2153                                 continue;
2154
2155                         DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
2156
2157                         /* control traffic */
2158                         if (usir0 & USIR0_IR0) {
2159                                 dev->ep[0].pio_irqs++;
2160                                 handle_ep0(dev);
2161                                 handled = 1;
2162                         }
2163
2164                         /* endpoint data transfers */
2165                         for (i = 0; i < 8; i++) {
2166                                 u32     tmp = 1 << i;
2167
2168                                 if (i && (usir0 & tmp)) {
2169                                         handle_ep(&dev->ep[i]);
2170                                         USIR0 |= tmp;
2171                                         handled = 1;
2172                                 }
2173                                 if (usir1 & tmp) {
2174                                         handle_ep(&dev->ep[i+8]);
2175                                         USIR1 |= tmp;
2176                                         handled = 1;
2177                                 }
2178                         }
2179                 }
2180
2181                 /* we could also ask for 1 msec SOF (SIR) interrupts */
2182
2183         } while (handled);
2184         return IRQ_HANDLED;
2185 }
2186
2187 /*-------------------------------------------------------------------------*/
2188
2189 static void nop_release (struct device *dev)
2190 {
2191         DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
2192 }
2193
2194 /* this uses load-time allocation and initialization (instead of
2195  * doing it at run-time) to save code, eliminate fault paths, and
2196  * be more obviously correct.
2197  */
2198 static struct pxa2xx_udc memory = {
2199         .gadget = {
2200                 .ops            = &pxa2xx_udc_ops,
2201                 .ep0            = &memory.ep[0].ep,
2202                 .name           = driver_name,
2203                 .dev = {
2204                         .bus_id         = "gadget",
2205                         .release        = nop_release,
2206                 },
2207         },
2208
2209         /* control endpoint */
2210         .ep[0] = {
2211                 .ep = {
2212                         .name           = ep0name,
2213                         .ops            = &pxa2xx_ep_ops,
2214                         .maxpacket      = EP0_FIFO_SIZE,
2215                 },
2216                 .dev            = &memory,
2217                 .reg_udccs      = &UDCCS0,
2218                 .reg_uddr       = &UDDR0,
2219         },
2220
2221         /* first group of endpoints */
2222         .ep[1] = {
2223                 .ep = {
2224                         .name           = "ep1in-bulk",
2225                         .ops            = &pxa2xx_ep_ops,
2226                         .maxpacket      = BULK_FIFO_SIZE,
2227                 },
2228                 .dev            = &memory,
2229                 .fifo_size      = BULK_FIFO_SIZE,
2230                 .bEndpointAddress = USB_DIR_IN | 1,
2231                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2232                 .reg_udccs      = &UDCCS1,
2233                 .reg_uddr       = &UDDR1,
2234                 drcmr (25)
2235         },
2236         .ep[2] = {
2237                 .ep = {
2238                         .name           = "ep2out-bulk",
2239                         .ops            = &pxa2xx_ep_ops,
2240                         .maxpacket      = BULK_FIFO_SIZE,
2241                 },
2242                 .dev            = &memory,
2243                 .fifo_size      = BULK_FIFO_SIZE,
2244                 .bEndpointAddress = 2,
2245                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2246                 .reg_udccs      = &UDCCS2,
2247                 .reg_ubcr       = &UBCR2,
2248                 .reg_uddr       = &UDDR2,
2249                 drcmr (26)
2250         },
2251 #ifndef CONFIG_USB_PXA2XX_SMALL
2252         .ep[3] = {
2253                 .ep = {
2254                         .name           = "ep3in-iso",
2255                         .ops            = &pxa2xx_ep_ops,
2256                         .maxpacket      = ISO_FIFO_SIZE,
2257                 },
2258                 .dev            = &memory,
2259                 .fifo_size      = ISO_FIFO_SIZE,
2260                 .bEndpointAddress = USB_DIR_IN | 3,
2261                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2262                 .reg_udccs      = &UDCCS3,
2263                 .reg_uddr       = &UDDR3,
2264                 drcmr (27)
2265         },
2266         .ep[4] = {
2267                 .ep = {
2268                         .name           = "ep4out-iso",
2269                         .ops            = &pxa2xx_ep_ops,
2270                         .maxpacket      = ISO_FIFO_SIZE,
2271                 },
2272                 .dev            = &memory,
2273                 .fifo_size      = ISO_FIFO_SIZE,
2274                 .bEndpointAddress = 4,
2275                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2276                 .reg_udccs      = &UDCCS4,
2277                 .reg_ubcr       = &UBCR4,
2278                 .reg_uddr       = &UDDR4,
2279                 drcmr (28)
2280         },
2281         .ep[5] = {
2282                 .ep = {
2283                         .name           = "ep5in-int",
2284                         .ops            = &pxa2xx_ep_ops,
2285                         .maxpacket      = INT_FIFO_SIZE,
2286                 },
2287                 .dev            = &memory,
2288                 .fifo_size      = INT_FIFO_SIZE,
2289                 .bEndpointAddress = USB_DIR_IN | 5,
2290                 .bmAttributes   = USB_ENDPOINT_XFER_INT,
2291                 .reg_udccs      = &UDCCS5,
2292                 .reg_uddr       = &UDDR5,
2293         },
2294
2295         /* second group of endpoints */
2296         .ep[6] = {
2297                 .ep = {
2298                         .name           = "ep6in-bulk",
2299                         .ops            = &pxa2xx_ep_ops,
2300                         .maxpacket      = BULK_FIFO_SIZE,
2301                 },
2302                 .dev            = &memory,
2303                 .fifo_size      = BULK_FIFO_SIZE,
2304                 .bEndpointAddress = USB_DIR_IN | 6,
2305                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2306                 .reg_udccs      = &UDCCS6,
2307                 .reg_uddr       = &UDDR6,
2308                 drcmr (30)
2309         },
2310         .ep[7] = {
2311                 .ep = {
2312                         .name           = "ep7out-bulk",
2313                         .ops            = &pxa2xx_ep_ops,
2314                         .maxpacket      = BULK_FIFO_SIZE,
2315                 },
2316                 .dev            = &memory,
2317                 .fifo_size      = BULK_FIFO_SIZE,
2318                 .bEndpointAddress = 7,
2319                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2320                 .reg_udccs      = &UDCCS7,
2321                 .reg_ubcr       = &UBCR7,
2322                 .reg_uddr       = &UDDR7,
2323                 drcmr (31)
2324         },
2325         .ep[8] = {
2326                 .ep = {
2327                         .name           = "ep8in-iso",
2328                         .ops            = &pxa2xx_ep_ops,
2329                         .maxpacket      = ISO_FIFO_SIZE,
2330                 },
2331                 .dev            = &memory,
2332                 .fifo_size      = ISO_FIFO_SIZE,
2333                 .bEndpointAddress = USB_DIR_IN | 8,
2334                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2335                 .reg_udccs      = &UDCCS8,
2336                 .reg_uddr       = &UDDR8,
2337                 drcmr (32)
2338         },
2339         .ep[9] = {
2340                 .ep = {
2341                         .name           = "ep9out-iso",
2342                         .ops            = &pxa2xx_ep_ops,
2343                         .maxpacket      = ISO_FIFO_SIZE,
2344                 },
2345                 .dev            = &memory,
2346                 .fifo_size      = ISO_FIFO_SIZE,
2347                 .bEndpointAddress = 9,
2348                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2349                 .reg_udccs      = &UDCCS9,
2350                 .reg_ubcr       = &UBCR9,
2351                 .reg_uddr       = &UDDR9,
2352                 drcmr (33)
2353         },
2354         .ep[10] = {
2355                 .ep = {
2356                         .name           = "ep10in-int",
2357                         .ops            = &pxa2xx_ep_ops,
2358                         .maxpacket      = INT_FIFO_SIZE,
2359                 },
2360                 .dev            = &memory,
2361                 .fifo_size      = INT_FIFO_SIZE,
2362                 .bEndpointAddress = USB_DIR_IN | 10,
2363                 .bmAttributes   = USB_ENDPOINT_XFER_INT,
2364                 .reg_udccs      = &UDCCS10,
2365                 .reg_uddr       = &UDDR10,
2366         },
2367
2368         /* third group of endpoints */
2369         .ep[11] = {
2370                 .ep = {
2371                         .name           = "ep11in-bulk",
2372                         .ops            = &pxa2xx_ep_ops,
2373                         .maxpacket      = BULK_FIFO_SIZE,
2374                 },
2375                 .dev            = &memory,
2376                 .fifo_size      = BULK_FIFO_SIZE,
2377                 .bEndpointAddress = USB_DIR_IN | 11,
2378                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2379                 .reg_udccs      = &UDCCS11,
2380                 .reg_uddr       = &UDDR11,
2381                 drcmr (35)
2382         },
2383         .ep[12] = {
2384                 .ep = {
2385                         .name           = "ep12out-bulk",
2386                         .ops            = &pxa2xx_ep_ops,
2387                         .maxpacket      = BULK_FIFO_SIZE,
2388                 },
2389                 .dev            = &memory,
2390                 .fifo_size      = BULK_FIFO_SIZE,
2391                 .bEndpointAddress = 12,
2392                 .bmAttributes   = USB_ENDPOINT_XFER_BULK,
2393                 .reg_udccs      = &UDCCS12,
2394                 .reg_ubcr       = &UBCR12,
2395                 .reg_uddr       = &UDDR12,
2396                 drcmr (36)
2397         },
2398         .ep[13] = {
2399                 .ep = {
2400                         .name           = "ep13in-iso",
2401                         .ops            = &pxa2xx_ep_ops,
2402                         .maxpacket      = ISO_FIFO_SIZE,
2403                 },
2404                 .dev            = &memory,
2405                 .fifo_size      = ISO_FIFO_SIZE,
2406                 .bEndpointAddress = USB_DIR_IN | 13,
2407                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2408                 .reg_udccs      = &UDCCS13,
2409                 .reg_uddr       = &UDDR13,
2410                 drcmr (37)
2411         },
2412         .ep[14] = {
2413                 .ep = {
2414                         .name           = "ep14out-iso",
2415                         .ops            = &pxa2xx_ep_ops,
2416                         .maxpacket      = ISO_FIFO_SIZE,
2417                 },
2418                 .dev            = &memory,
2419                 .fifo_size      = ISO_FIFO_SIZE,
2420                 .bEndpointAddress = 14,
2421                 .bmAttributes   = USB_ENDPOINT_XFER_ISOC,
2422                 .reg_udccs      = &UDCCS14,
2423                 .reg_ubcr       = &UBCR14,
2424                 .reg_uddr       = &UDDR14,
2425                 drcmr (38)
2426         },
2427         .ep[15] = {
2428                 .ep = {
2429                         .name           = "ep15in-int",
2430                         .ops            = &pxa2xx_ep_ops,
2431                         .maxpacket      = INT_FIFO_SIZE,
2432                 },
2433                 .dev            = &memory,
2434                 .fifo_size      = INT_FIFO_SIZE,
2435                 .bEndpointAddress = USB_DIR_IN | 15,
2436                 .bmAttributes   = USB_ENDPOINT_XFER_INT,
2437                 .reg_udccs      = &UDCCS15,
2438                 .reg_uddr       = &UDDR15,
2439         },
2440 #endif /* !CONFIG_USB_PXA2XX_SMALL */
2441 };
2442
2443 #define CP15R0_VENDOR_MASK      0xffffe000
2444
2445 #if     defined(CONFIG_ARCH_PXA)
2446 #define CP15R0_XSCALE_VALUE     0x69052000      /* intel/arm/xscale */
2447
2448 #elif   defined(CONFIG_ARCH_IXP4XX)
2449 #define CP15R0_XSCALE_VALUE     0x69054000      /* intel/arm/ixp4xx */
2450
2451 #endif
2452
2453 #define CP15R0_PROD_MASK        0x000003f0
2454 #define PXA25x                  0x00000100      /* and PXA26x */
2455 #define PXA210                  0x00000120
2456
2457 #define CP15R0_REV_MASK         0x0000000f
2458
2459 #define CP15R0_PRODREV_MASK     (CP15R0_PROD_MASK | CP15R0_REV_MASK)
2460
2461 #define PXA255_A0               0x00000106      /* or PXA260_B1 */
2462 #define PXA250_C0               0x00000105      /* or PXA26x_B0 */
2463 #define PXA250_B2               0x00000104
2464 #define PXA250_B1               0x00000103      /* or PXA260_A0 */
2465 #define PXA250_B0               0x00000102
2466 #define PXA250_A1               0x00000101
2467 #define PXA250_A0               0x00000100
2468
2469 #define PXA210_C0               0x00000125
2470 #define PXA210_B2               0x00000124
2471 #define PXA210_B1               0x00000123
2472 #define PXA210_B0               0x00000122
2473 #define IXP425_A0               0x000001c1
2474 #define IXP425_B0               0x000001f1
2475 #define IXP465_AD               0x00000200
2476
2477 /*
2478  *      probe - binds to the platform device
2479  */
2480 static int __init pxa2xx_udc_probe(struct platform_device *pdev)
2481 {
2482         struct pxa2xx_udc *dev = &memory;
2483         int retval, out_dma = 1, vbus_irq;
2484         u32 chiprev;
2485
2486         /* insist on Intel/ARM/XScale */
2487         asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
2488         if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
2489                 printk(KERN_ERR "%s: not XScale!\n", driver_name);
2490                 return -ENODEV;
2491         }
2492
2493         /* trigger chiprev-specific logic */
2494         switch (chiprev & CP15R0_PRODREV_MASK) {
2495 #if     defined(CONFIG_ARCH_PXA)
2496         case PXA255_A0:
2497                 dev->has_cfr = 1;
2498                 break;
2499         case PXA250_A0:
2500         case PXA250_A1:
2501                 /* A0/A1 "not released"; ep 13, 15 unusable */
2502                 /* fall through */
2503         case PXA250_B2: case PXA210_B2:
2504         case PXA250_B1: case PXA210_B1:
2505         case PXA250_B0: case PXA210_B0:
2506                 out_dma = 0;
2507                 /* fall through */
2508         case PXA250_C0: case PXA210_C0:
2509                 break;
2510 #elif   defined(CONFIG_ARCH_IXP4XX)
2511         case IXP425_A0:
2512         case IXP425_B0:
2513         case IXP465_AD:
2514                 dev->has_cfr = 1;
2515                 out_dma = 0;
2516                 break;
2517 #endif
2518         default:
2519                 out_dma = 0;
2520                 printk(KERN_ERR "%s: unrecognized processor: %08x\n",
2521                         driver_name, chiprev);
2522                 /* iop3xx, ixp4xx, ... */
2523                 return -ENODEV;
2524         }
2525
2526         pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB,
2527                 dev->has_cfr ? "" : " (!cfr)",
2528                 out_dma ? "" : " (broken dma-out)",
2529                 SIZE_STR DMASTR
2530                 );
2531
2532 #ifdef  USE_DMA
2533 #ifndef USE_OUT_DMA
2534         out_dma = 0;
2535 #endif
2536         /* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */
2537         if (!out_dma) {
2538                 DMSG("disabled OUT dma\n");
2539                 dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0;
2540                 dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0;
2541                 dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0;
2542         }
2543 #endif
2544
2545         /* other non-static parts of init */
2546         dev->dev = &pdev->dev;
2547         dev->mach = pdev->dev.platform_data;
2548         if (dev->mach->gpio_vbus) {
2549                 vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
2550                 pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
2551                                 | GPIO_IN);
2552                 set_irq_type(vbus_irq, IRQT_BOTHEDGE);
2553         } else
2554                 vbus_irq = 0;
2555         if (dev->mach->gpio_pullup)
2556                 pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
2557                                 | GPIO_OUT | GPIO_DFLT_LOW);
2558
2559         init_timer(&dev->timer);
2560         dev->timer.function = udc_watchdog;
2561         dev->timer.data = (unsigned long) dev;
2562
2563         device_initialize(&dev->gadget.dev);
2564         dev->gadget.dev.parent = &pdev->dev;
2565         dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
2566
2567         the_controller = dev;
2568         platform_set_drvdata(pdev, dev);
2569
2570         udc_disable(dev);
2571         udc_reinit(dev);
2572
2573         dev->vbus = is_vbus_present();
2574
2575         /* irq setup after old hardware state is cleaned up */
2576         retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
2577                         IRQF_DISABLED, driver_name, dev);
2578         if (retval != 0) {
2579                 printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2580                         driver_name, IRQ_USB, retval);
2581                 return -EBUSY;
2582         }
2583         dev->got_irq = 1;
2584
2585 #ifdef CONFIG_ARCH_LUBBOCK
2586         if (machine_is_lubbock()) {
2587                 retval = request_irq(LUBBOCK_USB_DISC_IRQ,
2588                                 lubbock_vbus_irq,
2589                                 IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
2590                                 driver_name, dev);
2591                 if (retval != 0) {
2592                         printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2593                                 driver_name, LUBBOCK_USB_DISC_IRQ, retval);
2594 lubbock_fail0:
2595                         free_irq(IRQ_USB, dev);
2596                         return -EBUSY;
2597                 }
2598                 retval = request_irq(LUBBOCK_USB_IRQ,
2599                                 lubbock_vbus_irq,
2600                                 IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
2601                                 driver_name, dev);
2602                 if (retval != 0) {
2603                         printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2604                                 driver_name, LUBBOCK_USB_IRQ, retval);
2605                         free_irq(LUBBOCK_USB_DISC_IRQ, dev);
2606                         goto lubbock_fail0;
2607                 }
2608 #ifdef DEBUG
2609                 /* with U-Boot (but not BLOB), hex is off by default */
2610                 HEX_DISPLAY(dev->stats.irqs);
2611                 LUB_DISC_BLNK_LED &= 0xff;
2612 #endif
2613         } else
2614 #endif
2615         if (vbus_irq) {
2616                 retval = request_irq(vbus_irq, udc_vbus_irq,
2617                                 SA_INTERRUPT | SA_SAMPLE_RANDOM,
2618                                 driver_name, dev);
2619                 if (retval != 0) {
2620                         printk(KERN_ERR "%s: can't get irq %i, err %d\n",
2621                                 driver_name, vbus_irq, retval);
2622                         free_irq(IRQ_USB, dev);
2623                         return -EBUSY;
2624                 }
2625         }
2626         create_proc_files();
2627
2628         return 0;
2629 }
2630
2631 static void pxa2xx_udc_shutdown(struct platform_device *_dev)
2632 {
2633         pullup_off();
2634 }
2635
2636 static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
2637 {
2638         struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
2639
2640         if (dev->driver)
2641                 return -EBUSY;
2642
2643         udc_disable(dev);
2644         remove_proc_files();
2645
2646         if (dev->got_irq) {
2647                 free_irq(IRQ_USB, dev);
2648                 dev->got_irq = 0;
2649         }
2650 #ifdef CONFIG_ARCH_LUBBOCK
2651         if (machine_is_lubbock()) {
2652                 free_irq(LUBBOCK_USB_DISC_IRQ, dev);
2653                 free_irq(LUBBOCK_USB_IRQ, dev);
2654         }
2655 #endif
2656         if (dev->mach->gpio_vbus)
2657                 free_irq(IRQ_GPIO(dev->mach->gpio_vbus), dev);
2658         platform_set_drvdata(pdev, NULL);
2659         the_controller = NULL;
2660         return 0;
2661 }
2662
2663 /*-------------------------------------------------------------------------*/
2664
2665 #ifdef  CONFIG_PM
2666
2667 /* USB suspend (controlled by the host) and system suspend (controlled
2668  * by the PXA) don't necessarily work well together.  If USB is active,
2669  * the 48 MHz clock is required; so the system can't enter 33 MHz idle
2670  * mode, or any deeper PM saving state.
2671  *
2672  * For now, we punt and forcibly disconnect from the USB host when PXA
2673  * enters any suspend state.  While we're disconnected, we always disable
2674  * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. 
2675  * Boards without software pullup control shouldn't use those states.
2676  * VBUS IRQs should probably be ignored so that the PXA device just acts
2677  * "dead" to USB hosts until system resume.
2678  */
2679 static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
2680 {
2681         struct pxa2xx_udc       *udc = platform_get_drvdata(dev);
2682
2683         if (!udc->mach->udc_command)
2684                 WARN("USB host won't detect disconnect!\n");
2685         pullup(udc, 0);
2686
2687         return 0;
2688 }
2689
2690 static int pxa2xx_udc_resume(struct platform_device *dev)
2691 {
2692         struct pxa2xx_udc       *udc = platform_get_drvdata(dev);
2693
2694         pullup(udc, 1);
2695
2696         return 0;
2697 }
2698
2699 #else
2700 #define pxa2xx_udc_suspend      NULL
2701 #define pxa2xx_udc_resume       NULL
2702 #endif
2703
2704 /*-------------------------------------------------------------------------*/
2705
2706 static struct platform_driver udc_driver = {
2707         .probe          = pxa2xx_udc_probe,
2708         .shutdown       = pxa2xx_udc_shutdown,
2709         .remove         = __exit_p(pxa2xx_udc_remove),
2710         .suspend        = pxa2xx_udc_suspend,
2711         .resume         = pxa2xx_udc_resume,
2712         .driver         = {
2713                 .owner  = THIS_MODULE,
2714                 .name   = "pxa2xx-udc",
2715         },
2716 };
2717
2718 static int __init udc_init(void)
2719 {
2720         printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
2721         return platform_driver_register(&udc_driver);
2722 }
2723 module_init(udc_init);
2724
2725 static void __exit udc_exit(void)
2726 {
2727         platform_driver_unregister(&udc_driver);
2728 }
2729 module_exit(udc_exit);
2730
2731 MODULE_DESCRIPTION(DRIVER_DESC);
2732 MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
2733 MODULE_LICENSE("GPL");
2734