Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
[linux-2.6] / drivers / usb / gadget / serial.c
1 /*
2  * g_serial.c -- USB gadget serial driver
3  *
4  * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
5  *
6  * This code is based in part on the Gadget Zero driver, which
7  * is Copyright (C) 2003 by David Brownell, all rights reserved.
8  *
9  * This code also borrows from usbserial.c, which is
10  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
11  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
12  * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
13  *
14  * This software is distributed under the terms of the GNU General
15  * Public License ("GPL") as published by the Free Software Foundation,
16  * either version 2 of that License or (at your option) any later version.
17  *
18  */
19
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/delay.h>
23 #include <linux/ioport.h>
24 #include <linux/sched.h>
25 #include <linux/slab.h>
26 #include <linux/smp_lock.h>
27 #include <linux/errno.h>
28 #include <linux/init.h>
29 #include <linux/timer.h>
30 #include <linux/list.h>
31 #include <linux/interrupt.h>
32 #include <linux/utsname.h>
33 #include <linux/wait.h>
34 #include <linux/proc_fs.h>
35 #include <linux/device.h>
36 #include <linux/tty.h>
37 #include <linux/tty_flip.h>
38
39 #include <asm/byteorder.h>
40 #include <asm/io.h>
41 #include <asm/irq.h>
42 #include <asm/system.h>
43 #include <asm/unaligned.h>
44 #include <asm/uaccess.h>
45
46 #include <linux/usb_ch9.h>
47 #include <linux/usb/cdc.h>
48 #include <linux/usb_gadget.h>
49
50 #include "gadget_chips.h"
51
52
53 /* Defines */
54
55 #define GS_VERSION_STR                  "v2.2"
56 #define GS_VERSION_NUM                  0x0202
57
58 #define GS_LONG_NAME                    "Gadget Serial"
59 #define GS_SHORT_NAME                   "g_serial"
60
61 #define GS_MAJOR                        127
62 #define GS_MINOR_START                  0
63
64 #define GS_NUM_PORTS                    16
65
66 #define GS_NUM_CONFIGS                  1
67 #define GS_NO_CONFIG_ID                 0
68 #define GS_BULK_CONFIG_ID               1
69 #define GS_ACM_CONFIG_ID                2
70
71 #define GS_MAX_NUM_INTERFACES           2
72 #define GS_BULK_INTERFACE_ID            0
73 #define GS_CONTROL_INTERFACE_ID         0
74 #define GS_DATA_INTERFACE_ID            1
75
76 #define GS_MAX_DESC_LEN                 256
77
78 #define GS_DEFAULT_READ_Q_SIZE          32
79 #define GS_DEFAULT_WRITE_Q_SIZE         32
80
81 #define GS_DEFAULT_WRITE_BUF_SIZE       8192
82 #define GS_TMP_BUF_SIZE                 8192
83
84 #define GS_CLOSE_TIMEOUT                15
85
86 #define GS_DEFAULT_USE_ACM              0
87
88 #define GS_DEFAULT_DTE_RATE             9600
89 #define GS_DEFAULT_DATA_BITS            8
90 #define GS_DEFAULT_PARITY               USB_CDC_NO_PARITY
91 #define GS_DEFAULT_CHAR_FORMAT          USB_CDC_1_STOP_BITS
92
93 /* select highspeed/fullspeed, hiding highspeed if not configured */
94 #ifdef CONFIG_USB_GADGET_DUALSPEED
95 #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
96 #else
97 #define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
98 #endif /* CONFIG_USB_GADGET_DUALSPEED */
99
100 /* debug settings */
101 #ifdef GS_DEBUG
102 static int debug = 1;
103
104 #define gs_debug(format, arg...) \
105         do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
106 #define gs_debug_level(level, format, arg...) \
107         do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
108
109 #else
110
111 #define gs_debug(format, arg...) \
112         do { } while(0)
113 #define gs_debug_level(level, format, arg...) \
114         do { } while(0)
115
116 #endif /* GS_DEBUG */
117
118 /* Thanks to NetChip Technologies for donating this product ID.
119  *
120  * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
121  * Instead:  allocate your own, using normal USB-IF procedures.
122  */
123 #define GS_VENDOR_ID                    0x0525  /* NetChip */
124 #define GS_PRODUCT_ID                   0xa4a6  /* Linux-USB Serial Gadget */
125 #define GS_CDC_PRODUCT_ID               0xa4a7  /* ... as CDC-ACM */
126
127 #define GS_LOG2_NOTIFY_INTERVAL         5       /* 1 << 5 == 32 msec */
128 #define GS_NOTIFY_MAXPACKET             8
129
130
131 /* Structures */
132
133 struct gs_dev;
134
135 /* circular buffer */
136 struct gs_buf {
137         unsigned int            buf_size;
138         char                    *buf_buf;
139         char                    *buf_get;
140         char                    *buf_put;
141 };
142
143 /* list of requests */
144 struct gs_req_entry {
145         struct list_head        re_entry;
146         struct usb_request      *re_req;
147 };
148
149 /* the port structure holds info for each port, one for each minor number */
150 struct gs_port {
151         struct gs_dev           *port_dev;      /* pointer to device struct */
152         struct tty_struct       *port_tty;      /* pointer to tty struct */
153         spinlock_t              port_lock;
154         int                     port_num;
155         int                     port_open_count;
156         int                     port_in_use;    /* open/close in progress */
157         wait_queue_head_t       port_write_wait;/* waiting to write */
158         struct gs_buf           *port_write_buf;
159         struct usb_cdc_line_coding      port_line_coding;
160 };
161
162 /* the device structure holds info for the USB device */
163 struct gs_dev {
164         struct usb_gadget       *dev_gadget;    /* gadget device pointer */
165         spinlock_t              dev_lock;       /* lock for set/reset config */
166         int                     dev_config;     /* configuration number */
167         struct usb_ep           *dev_notify_ep; /* address of notify endpoint */
168         struct usb_ep           *dev_in_ep;     /* address of in endpoint */
169         struct usb_ep           *dev_out_ep;    /* address of out endpoint */
170         struct usb_endpoint_descriptor          /* descriptor of notify ep */
171                                 *dev_notify_ep_desc;
172         struct usb_endpoint_descriptor          /* descriptor of in endpoint */
173                                 *dev_in_ep_desc;
174         struct usb_endpoint_descriptor          /* descriptor of out endpoint */
175                                 *dev_out_ep_desc;
176         struct usb_request      *dev_ctrl_req;  /* control request */
177         struct list_head        dev_req_list;   /* list of write requests */
178         int                     dev_sched_port; /* round robin port scheduled */
179         struct gs_port          *dev_port[GS_NUM_PORTS]; /* the ports */
180 };
181
182
183 /* Functions */
184
185 /* module */
186 static int __init gs_module_init(void);
187 static void __exit gs_module_exit(void);
188
189 /* tty driver */
190 static int gs_open(struct tty_struct *tty, struct file *file);
191 static void gs_close(struct tty_struct *tty, struct file *file);
192 static int gs_write(struct tty_struct *tty, 
193         const unsigned char *buf, int count);
194 static void gs_put_char(struct tty_struct *tty, unsigned char ch);
195 static void gs_flush_chars(struct tty_struct *tty);
196 static int gs_write_room(struct tty_struct *tty);
197 static int gs_chars_in_buffer(struct tty_struct *tty);
198 static void gs_throttle(struct tty_struct * tty);
199 static void gs_unthrottle(struct tty_struct * tty);
200 static void gs_break(struct tty_struct *tty, int break_state);
201 static int  gs_ioctl(struct tty_struct *tty, struct file *file,
202         unsigned int cmd, unsigned long arg);
203 static void gs_set_termios(struct tty_struct *tty, struct termios *old);
204
205 static int gs_send(struct gs_dev *dev);
206 static int gs_send_packet(struct gs_dev *dev, char *packet,
207         unsigned int size);
208 static int gs_recv_packet(struct gs_dev *dev, char *packet,
209         unsigned int size);
210 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
211 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
212
213 /* gadget driver */
214 static int gs_bind(struct usb_gadget *gadget);
215 static void gs_unbind(struct usb_gadget *gadget);
216 static int gs_setup(struct usb_gadget *gadget,
217         const struct usb_ctrlrequest *ctrl);
218 static int gs_setup_standard(struct usb_gadget *gadget,
219         const struct usb_ctrlrequest *ctrl);
220 static int gs_setup_class(struct usb_gadget *gadget,
221         const struct usb_ctrlrequest *ctrl);
222 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
223 static void gs_disconnect(struct usb_gadget *gadget);
224 static int gs_set_config(struct gs_dev *dev, unsigned config);
225 static void gs_reset_config(struct gs_dev *dev);
226 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
227                 u8 type, unsigned int index, int is_otg);
228
229 static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
230         gfp_t kmalloc_flags);
231 static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
232
233 static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
234         gfp_t kmalloc_flags);
235 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
236
237 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
238 static void gs_free_ports(struct gs_dev *dev);
239
240 /* circular buffer */
241 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
242 static void gs_buf_free(struct gs_buf *gb);
243 static void gs_buf_clear(struct gs_buf *gb);
244 static unsigned int gs_buf_data_avail(struct gs_buf *gb);
245 static unsigned int gs_buf_space_avail(struct gs_buf *gb);
246 static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
247         unsigned int count);
248 static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
249         unsigned int count);
250
251 /* external functions */
252 extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
253
254
255 /* Globals */
256
257 static struct gs_dev *gs_device;
258
259 static const char *EP_IN_NAME;
260 static const char *EP_OUT_NAME;
261 static const char *EP_NOTIFY_NAME;
262
263 static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
264
265 static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
266 static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
267
268 static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
269
270 static unsigned int use_acm = GS_DEFAULT_USE_ACM;
271
272
273 /* tty driver struct */
274 static struct tty_operations gs_tty_ops = {
275         .open =                 gs_open,
276         .close =                gs_close,
277         .write =                gs_write,
278         .put_char =             gs_put_char,
279         .flush_chars =          gs_flush_chars,
280         .write_room =           gs_write_room,
281         .ioctl =                gs_ioctl,
282         .set_termios =          gs_set_termios,
283         .throttle =             gs_throttle,
284         .unthrottle =           gs_unthrottle,
285         .break_ctl =            gs_break,
286         .chars_in_buffer =      gs_chars_in_buffer,
287 };
288 static struct tty_driver *gs_tty_driver;
289
290 /* gadget driver struct */
291 static struct usb_gadget_driver gs_gadget_driver = {
292 #ifdef CONFIG_USB_GADGET_DUALSPEED
293         .speed =                USB_SPEED_HIGH,
294 #else
295         .speed =                USB_SPEED_FULL,
296 #endif /* CONFIG_USB_GADGET_DUALSPEED */
297         .function =             GS_LONG_NAME,
298         .bind =                 gs_bind,
299         .unbind =               __exit_p(gs_unbind),
300         .setup =                gs_setup,
301         .disconnect =           gs_disconnect,
302         .driver = {
303                 .name =         GS_SHORT_NAME,
304         },
305 };
306
307
308 /* USB descriptors */
309
310 #define GS_MANUFACTURER_STR_ID  1
311 #define GS_PRODUCT_STR_ID       2
312 #define GS_SERIAL_STR_ID        3
313 #define GS_BULK_CONFIG_STR_ID   4
314 #define GS_ACM_CONFIG_STR_ID    5
315 #define GS_CONTROL_STR_ID       6
316 #define GS_DATA_STR_ID          7
317
318 /* static strings, in UTF-8 */
319 static char manufacturer[50];
320 static struct usb_string gs_strings[] = {
321         { GS_MANUFACTURER_STR_ID, manufacturer },
322         { GS_PRODUCT_STR_ID, GS_LONG_NAME },
323         { GS_SERIAL_STR_ID, "0" },
324         { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
325         { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
326         { GS_CONTROL_STR_ID, "Gadget Serial Control" },
327         { GS_DATA_STR_ID, "Gadget Serial Data" },
328         {  } /* end of list */
329 };
330
331 static struct usb_gadget_strings gs_string_table = {
332         .language =             0x0409, /* en-us */
333         .strings =              gs_strings,
334 };
335
336 static struct usb_device_descriptor gs_device_desc = {
337         .bLength =              USB_DT_DEVICE_SIZE,
338         .bDescriptorType =      USB_DT_DEVICE,
339         .bcdUSB =               __constant_cpu_to_le16(0x0200),
340         .bDeviceSubClass =      0,
341         .bDeviceProtocol =      0,
342         .idVendor =             __constant_cpu_to_le16(GS_VENDOR_ID),
343         .idProduct =            __constant_cpu_to_le16(GS_PRODUCT_ID),
344         .iManufacturer =        GS_MANUFACTURER_STR_ID,
345         .iProduct =             GS_PRODUCT_STR_ID,
346         .iSerialNumber =        GS_SERIAL_STR_ID,
347         .bNumConfigurations =   GS_NUM_CONFIGS,
348 };
349
350 static struct usb_otg_descriptor gs_otg_descriptor = {
351         .bLength =              sizeof(gs_otg_descriptor),
352         .bDescriptorType =      USB_DT_OTG,
353         .bmAttributes =         USB_OTG_SRP,
354 };
355
356 static struct usb_config_descriptor gs_bulk_config_desc = {
357         .bLength =              USB_DT_CONFIG_SIZE,
358         .bDescriptorType =      USB_DT_CONFIG,
359         /* .wTotalLength computed dynamically */
360         .bNumInterfaces =       1,
361         .bConfigurationValue =  GS_BULK_CONFIG_ID,
362         .iConfiguration =       GS_BULK_CONFIG_STR_ID,
363         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
364         .bMaxPower =            1,
365 };
366
367 static struct usb_config_descriptor gs_acm_config_desc = {
368         .bLength =              USB_DT_CONFIG_SIZE,
369         .bDescriptorType =      USB_DT_CONFIG,
370         /* .wTotalLength computed dynamically */
371         .bNumInterfaces =       2,
372         .bConfigurationValue =  GS_ACM_CONFIG_ID,
373         .iConfiguration =       GS_ACM_CONFIG_STR_ID,
374         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
375         .bMaxPower =            1,
376 };
377
378 static const struct usb_interface_descriptor gs_bulk_interface_desc = {
379         .bLength =              USB_DT_INTERFACE_SIZE,
380         .bDescriptorType =      USB_DT_INTERFACE,
381         .bInterfaceNumber =     GS_BULK_INTERFACE_ID,
382         .bNumEndpoints =        2,
383         .bInterfaceClass =      USB_CLASS_CDC_DATA,
384         .bInterfaceSubClass =   0,
385         .bInterfaceProtocol =   0,
386         .iInterface =           GS_DATA_STR_ID,
387 };
388
389 static const struct usb_interface_descriptor gs_control_interface_desc = {
390         .bLength =              USB_DT_INTERFACE_SIZE,
391         .bDescriptorType =      USB_DT_INTERFACE,
392         .bInterfaceNumber =     GS_CONTROL_INTERFACE_ID,
393         .bNumEndpoints =        1,
394         .bInterfaceClass =      USB_CLASS_COMM,
395         .bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
396         .bInterfaceProtocol =   USB_CDC_ACM_PROTO_AT_V25TER,
397         .iInterface =           GS_CONTROL_STR_ID,
398 };
399
400 static const struct usb_interface_descriptor gs_data_interface_desc = {
401         .bLength =              USB_DT_INTERFACE_SIZE,
402         .bDescriptorType =      USB_DT_INTERFACE,
403         .bInterfaceNumber =     GS_DATA_INTERFACE_ID,
404         .bNumEndpoints =        2,
405         .bInterfaceClass =      USB_CLASS_CDC_DATA,
406         .bInterfaceSubClass =   0,
407         .bInterfaceProtocol =   0,
408         .iInterface =           GS_DATA_STR_ID,
409 };
410
411 static const struct usb_cdc_header_desc gs_header_desc = {
412         .bLength =              sizeof(gs_header_desc),
413         .bDescriptorType =      USB_DT_CS_INTERFACE,
414         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
415         .bcdCDC =               __constant_cpu_to_le16(0x0110),
416 };
417
418 static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
419         .bLength =              sizeof(gs_call_mgmt_descriptor),
420         .bDescriptorType =      USB_DT_CS_INTERFACE,
421         .bDescriptorSubType =   USB_CDC_CALL_MANAGEMENT_TYPE,
422         .bmCapabilities =       0,
423         .bDataInterface =       1,      /* index of data interface */
424 };
425
426 static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
427         .bLength =              sizeof(gs_acm_descriptor),
428         .bDescriptorType =      USB_DT_CS_INTERFACE,
429         .bDescriptorSubType =   USB_CDC_ACM_TYPE,
430         .bmCapabilities =       0,
431 };
432
433 static const struct usb_cdc_union_desc gs_union_desc = {
434         .bLength =              sizeof(gs_union_desc),
435         .bDescriptorType =      USB_DT_CS_INTERFACE,
436         .bDescriptorSubType =   USB_CDC_UNION_TYPE,
437         .bMasterInterface0 =    0,      /* index of control interface */
438         .bSlaveInterface0 =     1,      /* index of data interface */
439 };
440  
441 static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
442         .bLength =              USB_DT_ENDPOINT_SIZE,
443         .bDescriptorType =      USB_DT_ENDPOINT,
444         .bEndpointAddress =     USB_DIR_IN,
445         .bmAttributes =         USB_ENDPOINT_XFER_INT,
446         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
447         .bInterval =            1 << GS_LOG2_NOTIFY_INTERVAL,
448 };
449
450 static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
451         .bLength =              USB_DT_ENDPOINT_SIZE,
452         .bDescriptorType =      USB_DT_ENDPOINT,
453         .bEndpointAddress =     USB_DIR_IN,
454         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
455 };
456
457 static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
458         .bLength =              USB_DT_ENDPOINT_SIZE,
459         .bDescriptorType =      USB_DT_ENDPOINT,
460         .bEndpointAddress =     USB_DIR_OUT,
461         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
462 };
463
464 static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
465         (struct usb_descriptor_header *) &gs_otg_descriptor,
466         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
467         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
468         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
469         NULL,
470 };
471
472 static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
473         (struct usb_descriptor_header *) &gs_otg_descriptor,
474         (struct usb_descriptor_header *) &gs_control_interface_desc,
475         (struct usb_descriptor_header *) &gs_header_desc,
476         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
477         (struct usb_descriptor_header *) &gs_acm_descriptor,
478         (struct usb_descriptor_header *) &gs_union_desc,
479         (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
480         (struct usb_descriptor_header *) &gs_data_interface_desc,
481         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
482         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
483         NULL,
484 };
485
486 #ifdef CONFIG_USB_GADGET_DUALSPEED
487 static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
488         .bLength =              USB_DT_ENDPOINT_SIZE,
489         .bDescriptorType =      USB_DT_ENDPOINT,
490         .bEndpointAddress =     USB_DIR_IN,
491         .bmAttributes =         USB_ENDPOINT_XFER_INT,
492         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
493         .bInterval =            GS_LOG2_NOTIFY_INTERVAL+4,
494 };
495
496 static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
497         .bLength =              USB_DT_ENDPOINT_SIZE,
498         .bDescriptorType =      USB_DT_ENDPOINT,
499         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
500         .wMaxPacketSize =       __constant_cpu_to_le16(512),
501 };
502
503 static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
504         .bLength =              USB_DT_ENDPOINT_SIZE,
505         .bDescriptorType =      USB_DT_ENDPOINT,
506         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
507         .wMaxPacketSize =       __constant_cpu_to_le16(512),
508 };
509
510 static struct usb_qualifier_descriptor gs_qualifier_desc = {
511         .bLength =              sizeof(struct usb_qualifier_descriptor),
512         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
513         .bcdUSB =               __constant_cpu_to_le16 (0x0200),
514         /* assumes ep0 uses the same value for both speeds ... */
515         .bNumConfigurations =   GS_NUM_CONFIGS,
516 };
517
518 static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
519         (struct usb_descriptor_header *) &gs_otg_descriptor,
520         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
521         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
522         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
523         NULL,
524 };
525
526 static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
527         (struct usb_descriptor_header *) &gs_otg_descriptor,
528         (struct usb_descriptor_header *) &gs_control_interface_desc,
529         (struct usb_descriptor_header *) &gs_header_desc,
530         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
531         (struct usb_descriptor_header *) &gs_acm_descriptor,
532         (struct usb_descriptor_header *) &gs_union_desc,
533         (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
534         (struct usb_descriptor_header *) &gs_data_interface_desc,
535         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
536         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
537         NULL,
538 };
539
540 #endif /* CONFIG_USB_GADGET_DUALSPEED */
541
542
543 /* Module */
544 MODULE_DESCRIPTION(GS_LONG_NAME);
545 MODULE_AUTHOR("Al Borchers");
546 MODULE_LICENSE("GPL");
547
548 #ifdef GS_DEBUG
549 module_param(debug, int, S_IRUGO|S_IWUSR);
550 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
551 #endif
552
553 module_param(read_q_size, uint, S_IRUGO);
554 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
555
556 module_param(write_q_size, uint, S_IRUGO);
557 MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
558
559 module_param(write_buf_size, uint, S_IRUGO);
560 MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
561
562 module_param(use_acm, uint, S_IRUGO);
563 MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
564
565 module_init(gs_module_init);
566 module_exit(gs_module_exit);
567
568 /*
569 *  gs_module_init
570 *
571 *  Register as a USB gadget driver and a tty driver.
572 */
573 static int __init gs_module_init(void)
574 {
575         int i;
576         int retval;
577
578         retval = usb_gadget_register_driver(&gs_gadget_driver);
579         if (retval) {
580                 printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
581                 return retval;
582         }
583
584         gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
585         if (!gs_tty_driver)
586                 return -ENOMEM;
587         gs_tty_driver->owner = THIS_MODULE;
588         gs_tty_driver->driver_name = GS_SHORT_NAME;
589         gs_tty_driver->name = "ttygs";
590         gs_tty_driver->major = GS_MAJOR;
591         gs_tty_driver->minor_start = GS_MINOR_START;
592         gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
593         gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
594         gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
595         gs_tty_driver->init_termios = tty_std_termios;
596         gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
597         tty_set_operations(gs_tty_driver, &gs_tty_ops);
598
599         for (i=0; i < GS_NUM_PORTS; i++)
600                 sema_init(&gs_open_close_sem[i], 1);
601
602         retval = tty_register_driver(gs_tty_driver);
603         if (retval) {
604                 usb_gadget_unregister_driver(&gs_gadget_driver);
605                 put_tty_driver(gs_tty_driver);
606                 printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
607                 return retval;
608         }
609
610         printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
611         return 0;
612 }
613
614 /*
615 * gs_module_exit
616 *
617 * Unregister as a tty driver and a USB gadget driver.
618 */
619 static void __exit gs_module_exit(void)
620 {
621         tty_unregister_driver(gs_tty_driver);
622         put_tty_driver(gs_tty_driver);
623         usb_gadget_unregister_driver(&gs_gadget_driver);
624
625         printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
626 }
627
628 /* TTY Driver */
629
630 /*
631  * gs_open
632  */
633 static int gs_open(struct tty_struct *tty, struct file *file)
634 {
635         int port_num;
636         unsigned long flags;
637         struct gs_port *port;
638         struct gs_dev *dev;
639         struct gs_buf *buf;
640         struct semaphore *sem;
641         int ret;
642
643         port_num = tty->index;
644
645         gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
646
647         if (port_num < 0 || port_num >= GS_NUM_PORTS) {
648                 printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
649                         port_num, tty, file);
650                 return -ENODEV;
651         }
652
653         dev = gs_device;
654
655         if (dev == NULL) {
656                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
657                         port_num, tty, file);
658                 return -ENODEV;
659         }
660
661         sem = &gs_open_close_sem[port_num];
662         if (down_interruptible(sem)) {
663                 printk(KERN_ERR
664                 "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
665                         port_num, tty, file);
666                 return -ERESTARTSYS;
667         }
668
669         spin_lock_irqsave(&dev->dev_lock, flags);
670
671         if (dev->dev_config == GS_NO_CONFIG_ID) {
672                 printk(KERN_ERR
673                         "gs_open: (%d,%p,%p) device is not connected\n",
674                         port_num, tty, file);
675                 ret = -ENODEV;
676                 goto exit_unlock_dev;
677         }
678
679         port = dev->dev_port[port_num];
680
681         if (port == NULL) {
682                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
683                         port_num, tty, file);
684                 ret = -ENODEV;
685                 goto exit_unlock_dev;
686         }
687
688         spin_lock(&port->port_lock);
689         spin_unlock(&dev->dev_lock);
690
691         if (port->port_dev == NULL) {
692                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
693                         port_num, tty, file);
694                 ret = -EIO;
695                 goto exit_unlock_port;
696         }
697
698         if (port->port_open_count > 0) {
699                 ++port->port_open_count;
700                 gs_debug("gs_open: (%d,%p,%p) already open\n",
701                         port_num, tty, file);
702                 ret = 0;
703                 goto exit_unlock_port;
704         }
705
706         tty->driver_data = NULL;
707
708         /* mark port as in use, we can drop port lock and sleep if necessary */
709         port->port_in_use = 1;
710
711         /* allocate write buffer on first open */
712         if (port->port_write_buf == NULL) {
713                 spin_unlock_irqrestore(&port->port_lock, flags);
714                 buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
715                 spin_lock_irqsave(&port->port_lock, flags);
716
717                 /* might have been disconnected while asleep, check */
718                 if (port->port_dev == NULL) {
719                         printk(KERN_ERR
720                                 "gs_open: (%d,%p,%p) port disconnected (2)\n",
721                                 port_num, tty, file);
722                         port->port_in_use = 0;
723                         ret = -EIO;
724                         goto exit_unlock_port;
725                 }
726
727                 if ((port->port_write_buf=buf) == NULL) {
728                         printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
729                                 port_num, tty, file);
730                         port->port_in_use = 0;
731                         ret = -ENOMEM;
732                         goto exit_unlock_port;
733                 }
734
735         }
736
737         /* wait for carrier detect (not implemented) */
738
739         /* might have been disconnected while asleep, check */
740         if (port->port_dev == NULL) {
741                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
742                         port_num, tty, file);
743                 port->port_in_use = 0;
744                 ret = -EIO;
745                 goto exit_unlock_port;
746         }
747
748         tty->driver_data = port;
749         port->port_tty = tty;
750         port->port_open_count = 1;
751         port->port_in_use = 0;
752
753         gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
754
755         ret = 0;
756
757 exit_unlock_port:
758         spin_unlock_irqrestore(&port->port_lock, flags);
759         up(sem);
760         return ret;
761
762 exit_unlock_dev:
763         spin_unlock_irqrestore(&dev->dev_lock, flags);
764         up(sem);
765         return ret;
766
767 }
768
769 /*
770  * gs_close
771  */
772
773 #define GS_WRITE_FINISHED_EVENT_SAFELY(p)                       \
774 ({                                                              \
775         int cond;                                               \
776                                                                 \
777         spin_lock_irq(&(p)->port_lock);                         \
778         cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \
779         spin_unlock_irq(&(p)->port_lock);                       \
780         cond;                                                   \
781 })
782
783 static void gs_close(struct tty_struct *tty, struct file *file)
784 {
785         struct gs_port *port = tty->driver_data;
786         struct semaphore *sem;
787
788         if (port == NULL) {
789                 printk(KERN_ERR "gs_close: NULL port pointer\n");
790                 return;
791         }
792
793         gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
794
795         sem = &gs_open_close_sem[port->port_num];
796         down(sem);
797
798         spin_lock_irq(&port->port_lock);
799
800         if (port->port_open_count == 0) {
801                 printk(KERN_ERR
802                         "gs_close: (%d,%p,%p) port is already closed\n",
803                         port->port_num, tty, file);
804                 goto exit;
805         }
806
807         if (port->port_open_count > 1) {
808                 --port->port_open_count;
809                 goto exit;
810         }
811
812         /* free disconnected port on final close */
813         if (port->port_dev == NULL) {
814                 kfree(port);
815                 goto exit;
816         }
817
818         /* mark port as closed but in use, we can drop port lock */
819         /* and sleep if necessary */
820         port->port_in_use = 1;
821         port->port_open_count = 0;
822
823         /* wait for write buffer to drain, or */
824         /* at most GS_CLOSE_TIMEOUT seconds */
825         if (gs_buf_data_avail(port->port_write_buf) > 0) {
826                 spin_unlock_irq(&port->port_lock);
827                 wait_event_interruptible_timeout(port->port_write_wait,
828                                         GS_WRITE_FINISHED_EVENT_SAFELY(port),
829                                         GS_CLOSE_TIMEOUT * HZ);
830                 spin_lock_irq(&port->port_lock);
831         }
832
833         /* free disconnected port on final close */
834         /* (might have happened during the above sleep) */
835         if (port->port_dev == NULL) {
836                 kfree(port);
837                 goto exit;
838         }
839
840         gs_buf_clear(port->port_write_buf);
841
842         tty->driver_data = NULL;
843         port->port_tty = NULL;
844         port->port_in_use = 0;
845
846         gs_debug("gs_close: (%d,%p,%p) completed\n",
847                 port->port_num, tty, file);
848
849 exit:
850         spin_unlock_irq(&port->port_lock);
851         up(sem);
852 }
853
854 /*
855  * gs_write
856  */
857 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
858 {
859         unsigned long flags;
860         struct gs_port *port = tty->driver_data;
861         int ret;
862
863         if (port == NULL) {
864                 printk(KERN_ERR "gs_write: NULL port pointer\n");
865                 return -EIO;
866         }
867
868         gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
869                 count);
870
871         if (count == 0)
872                 return 0;
873
874         spin_lock_irqsave(&port->port_lock, flags);
875
876         if (port->port_dev == NULL) {
877                 printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
878                         port->port_num, tty);
879                 ret = -EIO;
880                 goto exit;
881         }
882
883         if (port->port_open_count == 0) {
884                 printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
885                         port->port_num, tty);
886                 ret = -EBADF;
887                 goto exit;
888         }
889
890         count = gs_buf_put(port->port_write_buf, buf, count);
891
892         spin_unlock_irqrestore(&port->port_lock, flags);
893
894         gs_send(gs_device);
895
896         gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
897                 count);
898
899         return count;
900
901 exit:
902         spin_unlock_irqrestore(&port->port_lock, flags);
903         return ret;
904 }
905
906 /*
907  * gs_put_char
908  */
909 static void gs_put_char(struct tty_struct *tty, unsigned char ch)
910 {
911         unsigned long flags;
912         struct gs_port *port = tty->driver_data;
913
914         if (port == NULL) {
915                 printk(KERN_ERR "gs_put_char: NULL port pointer\n");
916                 return;
917         }
918
919         gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
920
921         spin_lock_irqsave(&port->port_lock, flags);
922
923         if (port->port_dev == NULL) {
924                 printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
925                         port->port_num, tty);
926                 goto exit;
927         }
928
929         if (port->port_open_count == 0) {
930                 printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
931                         port->port_num, tty);
932                 goto exit;
933         }
934
935         gs_buf_put(port->port_write_buf, &ch, 1);
936
937 exit:
938         spin_unlock_irqrestore(&port->port_lock, flags);
939 }
940
941 /*
942  * gs_flush_chars
943  */
944 static void gs_flush_chars(struct tty_struct *tty)
945 {
946         unsigned long flags;
947         struct gs_port *port = tty->driver_data;
948
949         if (port == NULL) {
950                 printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
951                 return;
952         }
953
954         gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
955
956         spin_lock_irqsave(&port->port_lock, flags);
957
958         if (port->port_dev == NULL) {
959                 printk(KERN_ERR
960                         "gs_flush_chars: (%d,%p) port is not connected\n",
961                         port->port_num, tty);
962                 goto exit;
963         }
964
965         if (port->port_open_count == 0) {
966                 printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
967                         port->port_num, tty);
968                 goto exit;
969         }
970
971         spin_unlock_irqrestore(&port->port_lock, flags);
972
973         gs_send(gs_device);
974
975         return;
976
977 exit:
978         spin_unlock_irqrestore(&port->port_lock, flags);
979 }
980
981 /*
982  * gs_write_room
983  */
984 static int gs_write_room(struct tty_struct *tty)
985 {
986
987         int room = 0;
988         unsigned long flags;
989         struct gs_port *port = tty->driver_data;
990
991
992         if (port == NULL)
993                 return 0;
994
995         spin_lock_irqsave(&port->port_lock, flags);
996
997         if (port->port_dev != NULL && port->port_open_count > 0
998         && port->port_write_buf != NULL)
999                 room = gs_buf_space_avail(port->port_write_buf);
1000
1001         spin_unlock_irqrestore(&port->port_lock, flags);
1002
1003         gs_debug("gs_write_room: (%d,%p) room=%d\n",
1004                 port->port_num, tty, room);
1005
1006         return room;
1007 }
1008
1009 /*
1010  * gs_chars_in_buffer
1011  */
1012 static int gs_chars_in_buffer(struct tty_struct *tty)
1013 {
1014         int chars = 0;
1015         unsigned long flags;
1016         struct gs_port *port = tty->driver_data;
1017
1018         if (port == NULL)
1019                 return 0;
1020
1021         spin_lock_irqsave(&port->port_lock, flags);
1022
1023         if (port->port_dev != NULL && port->port_open_count > 0
1024         && port->port_write_buf != NULL)
1025                 chars = gs_buf_data_avail(port->port_write_buf);
1026
1027         spin_unlock_irqrestore(&port->port_lock, flags);
1028
1029         gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
1030                 port->port_num, tty, chars);
1031
1032         return chars;
1033 }
1034
1035 /*
1036  * gs_throttle
1037  */
1038 static void gs_throttle(struct tty_struct *tty)
1039 {
1040 }
1041
1042 /*
1043  * gs_unthrottle
1044  */
1045 static void gs_unthrottle(struct tty_struct *tty)
1046 {
1047 }
1048
1049 /*
1050  * gs_break
1051  */
1052 static void gs_break(struct tty_struct *tty, int break_state)
1053 {
1054 }
1055
1056 /*
1057  * gs_ioctl
1058  */
1059 static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1060 {
1061         struct gs_port *port = tty->driver_data;
1062
1063         if (port == NULL) {
1064                 printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
1065                 return -EIO;
1066         }
1067
1068         gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
1069                 port->port_num, tty, file, cmd, arg);
1070
1071         /* handle ioctls */
1072
1073         /* could not handle ioctl */
1074         return -ENOIOCTLCMD;
1075 }
1076
1077 /*
1078  * gs_set_termios
1079  */
1080 static void gs_set_termios(struct tty_struct *tty, struct termios *old)
1081 {
1082 }
1083
1084 /*
1085 * gs_send
1086 *
1087 * This function finds available write requests, calls
1088 * gs_send_packet to fill these packets with data, and
1089 * continues until either there are no more write requests
1090 * available or no more data to send.  This function is
1091 * run whenever data arrives or write requests are available.
1092 */
1093 static int gs_send(struct gs_dev *dev)
1094 {
1095         int ret,len;
1096         unsigned long flags;
1097         struct usb_ep *ep;
1098         struct usb_request *req;
1099         struct gs_req_entry *req_entry;
1100
1101         if (dev == NULL) {
1102                 printk(KERN_ERR "gs_send: NULL device pointer\n");
1103                 return -ENODEV;
1104         }
1105
1106         spin_lock_irqsave(&dev->dev_lock, flags);
1107
1108         ep = dev->dev_in_ep;
1109
1110         while(!list_empty(&dev->dev_req_list)) {
1111
1112                 req_entry = list_entry(dev->dev_req_list.next,
1113                         struct gs_req_entry, re_entry);
1114
1115                 req = req_entry->re_req;
1116
1117                 len = gs_send_packet(dev, req->buf, ep->maxpacket);
1118
1119                 if (len > 0) {
1120 gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
1121                         list_del(&req_entry->re_entry);
1122                         req->length = len;
1123                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1124                                 printk(KERN_ERR
1125                                 "gs_send: cannot queue read request, ret=%d\n",
1126                                         ret);
1127                                 break;
1128                         }
1129                 } else {
1130                         break;
1131                 }
1132
1133         }
1134
1135         spin_unlock_irqrestore(&dev->dev_lock, flags);
1136
1137         return 0;
1138 }
1139
1140 /*
1141  * gs_send_packet
1142  *
1143  * If there is data to send, a packet is built in the given
1144  * buffer and the size is returned.  If there is no data to
1145  * send, 0 is returned.  If there is any error a negative
1146  * error number is returned.
1147  *
1148  * Called during USB completion routine, on interrupt time.
1149  *
1150  * We assume that disconnect will not happen until all completion
1151  * routines have completed, so we can assume that the dev_port
1152  * array does not change during the lifetime of this function.
1153  */
1154 static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
1155 {
1156         unsigned int len;
1157         struct gs_port *port;
1158
1159         /* TEMPORARY -- only port 0 is supported right now */
1160         port = dev->dev_port[0];
1161
1162         if (port == NULL) {
1163                 printk(KERN_ERR
1164                         "gs_send_packet: port=%d, NULL port pointer\n",
1165                         0);
1166                 return -EIO;
1167         }
1168
1169         spin_lock(&port->port_lock);
1170
1171         len = gs_buf_data_avail(port->port_write_buf);
1172         if (len < size)
1173                 size = len;
1174
1175         if (size == 0)
1176                 goto exit;
1177
1178         size = gs_buf_get(port->port_write_buf, packet, size);
1179
1180         if (port->port_tty)
1181                 wake_up_interruptible(&port->port_tty->write_wait);
1182
1183 exit:
1184         spin_unlock(&port->port_lock);
1185         return size;
1186 }
1187
1188 /*
1189  * gs_recv_packet
1190  *
1191  * Called for each USB packet received.  Reads the packet
1192  * header and stuffs the data in the appropriate tty buffer.
1193  * Returns 0 if successful, or a negative error number.
1194  *
1195  * Called during USB completion routine, on interrupt time.
1196  *
1197  * We assume that disconnect will not happen until all completion
1198  * routines have completed, so we can assume that the dev_port
1199  * array does not change during the lifetime of this function.
1200  */
1201 static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
1202 {
1203         unsigned int len;
1204         struct gs_port *port;
1205         int ret;
1206         struct tty_struct *tty;
1207
1208         /* TEMPORARY -- only port 0 is supported right now */
1209         port = dev->dev_port[0];
1210
1211         if (port == NULL) {
1212                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
1213                         port->port_num);
1214                 return -EIO;
1215         }
1216
1217         spin_lock(&port->port_lock);
1218
1219         if (port->port_open_count == 0) {
1220                 printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
1221                         port->port_num);
1222                 ret = -EIO;
1223                 goto exit;
1224         }
1225
1226
1227         tty = port->port_tty;
1228
1229         if (tty == NULL) {
1230                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
1231                         port->port_num);
1232                 ret = -EIO;
1233                 goto exit;
1234         }
1235
1236         if (port->port_tty->magic != TTY_MAGIC) {
1237                 printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
1238                         port->port_num);
1239                 ret = -EIO;
1240                 goto exit;
1241         }
1242
1243         len = tty_buffer_request_room(tty, size);
1244         if (len > 0) {
1245                 tty_insert_flip_string(tty, packet, len);
1246                 tty_flip_buffer_push(port->port_tty);
1247                 wake_up_interruptible(&port->port_tty->read_wait);
1248         }
1249         ret = 0;
1250 exit:
1251         spin_unlock(&port->port_lock);
1252         return ret;
1253 }
1254
1255 /*
1256 * gs_read_complete
1257 */
1258 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
1259 {
1260         int ret;
1261         struct gs_dev *dev = ep->driver_data;
1262
1263         if (dev == NULL) {
1264                 printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
1265                 return;
1266         }
1267
1268         switch(req->status) {
1269         case 0:
1270                 /* normal completion */
1271                 gs_recv_packet(dev, req->buf, req->actual);
1272 requeue:
1273                 req->length = ep->maxpacket;
1274                 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1275                         printk(KERN_ERR
1276                         "gs_read_complete: cannot queue read request, ret=%d\n",
1277                                 ret);
1278                 }
1279                 break;
1280
1281         case -ESHUTDOWN:
1282                 /* disconnect */
1283                 gs_debug("gs_read_complete: shutdown\n");
1284                 gs_free_req(ep, req);
1285                 break;
1286
1287         default:
1288                 /* unexpected */
1289                 printk(KERN_ERR
1290                 "gs_read_complete: unexpected status error, status=%d\n",
1291                         req->status);
1292                 goto requeue;
1293                 break;
1294         }
1295 }
1296
1297 /*
1298 * gs_write_complete
1299 */
1300 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
1301 {
1302         struct gs_dev *dev = ep->driver_data;
1303         struct gs_req_entry *gs_req = req->context;
1304
1305         if (dev == NULL) {
1306                 printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
1307                 return;
1308         }
1309
1310         switch(req->status) {
1311         case 0:
1312                 /* normal completion */
1313 requeue:
1314                 if (gs_req == NULL) {
1315                         printk(KERN_ERR
1316                                 "gs_write_complete: NULL request pointer\n");
1317                         return;
1318                 }
1319
1320                 spin_lock(&dev->dev_lock);
1321                 list_add(&gs_req->re_entry, &dev->dev_req_list);
1322                 spin_unlock(&dev->dev_lock);
1323
1324                 gs_send(dev);
1325
1326                 break;
1327
1328         case -ESHUTDOWN:
1329                 /* disconnect */
1330                 gs_debug("gs_write_complete: shutdown\n");
1331                 gs_free_req(ep, req);
1332                 break;
1333
1334         default:
1335                 printk(KERN_ERR
1336                 "gs_write_complete: unexpected status error, status=%d\n",
1337                         req->status);
1338                 goto requeue;
1339                 break;
1340         }
1341 }
1342
1343 /* Gadget Driver */
1344
1345 /*
1346  * gs_bind
1347  *
1348  * Called on module load.  Allocates and initializes the device
1349  * structure and a control request.
1350  */
1351 static int __init gs_bind(struct usb_gadget *gadget)
1352 {
1353         int ret;
1354         struct usb_ep *ep;
1355         struct gs_dev *dev;
1356         int gcnum;
1357
1358         /* Some controllers can't support CDC ACM:
1359          * - sh doesn't support multiple interfaces or configs;
1360          * - sa1100 doesn't have a third interrupt endpoint
1361          */
1362         if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
1363                 use_acm = 0;
1364
1365         gcnum = usb_gadget_controller_number(gadget);
1366         if (gcnum >= 0)
1367                 gs_device_desc.bcdDevice =
1368                                 cpu_to_le16(GS_VERSION_NUM | gcnum);
1369         else {
1370                 printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
1371                         gadget->name);
1372                 /* unrecognized, but safe unless bulk is REALLY quirky */
1373                 gs_device_desc.bcdDevice =
1374                         __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
1375         }
1376
1377         usb_ep_autoconfig_reset(gadget);
1378
1379         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
1380         if (!ep)
1381                 goto autoconf_fail;
1382         EP_IN_NAME = ep->name;
1383         ep->driver_data = ep;   /* claim the endpoint */
1384
1385         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
1386         if (!ep)
1387                 goto autoconf_fail;
1388         EP_OUT_NAME = ep->name;
1389         ep->driver_data = ep;   /* claim the endpoint */
1390
1391         if (use_acm) {
1392                 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
1393                 if (!ep) {
1394                         printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
1395                         goto autoconf_fail;
1396                 }
1397                 gs_device_desc.idProduct = __constant_cpu_to_le16(
1398                                                 GS_CDC_PRODUCT_ID),
1399                 EP_NOTIFY_NAME = ep->name;
1400                 ep->driver_data = ep;   /* claim the endpoint */
1401         }
1402
1403         gs_device_desc.bDeviceClass = use_acm
1404                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1405         gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1406
1407 #ifdef CONFIG_USB_GADGET_DUALSPEED
1408         gs_qualifier_desc.bDeviceClass = use_acm
1409                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1410         /* assume ep0 uses the same packet size for both speeds */
1411         gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
1412         /* assume endpoints are dual-speed */
1413         gs_highspeed_notify_desc.bEndpointAddress =
1414                 gs_fullspeed_notify_desc.bEndpointAddress;
1415         gs_highspeed_in_desc.bEndpointAddress =
1416                 gs_fullspeed_in_desc.bEndpointAddress;
1417         gs_highspeed_out_desc.bEndpointAddress =
1418                 gs_fullspeed_out_desc.bEndpointAddress;
1419 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1420
1421         usb_gadget_set_selfpowered(gadget);
1422
1423         if (gadget->is_otg) {
1424                 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
1425                 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1426                 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1427         }
1428
1429         gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
1430         if (dev == NULL)
1431                 return -ENOMEM;
1432
1433         snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1434                 system_utsname.sysname, system_utsname.release,
1435                 gadget->name);
1436
1437         memset(dev, 0, sizeof(struct gs_dev));
1438         dev->dev_gadget = gadget;
1439         spin_lock_init(&dev->dev_lock);
1440         INIT_LIST_HEAD(&dev->dev_req_list);
1441         set_gadget_data(gadget, dev);
1442
1443         if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
1444                 printk(KERN_ERR "gs_bind: cannot allocate ports\n");
1445                 gs_unbind(gadget);
1446                 return ret;
1447         }
1448
1449         /* preallocate control response and buffer */
1450         dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
1451                 GFP_KERNEL);
1452         if (dev->dev_ctrl_req == NULL) {
1453                 gs_unbind(gadget);
1454                 return -ENOMEM;
1455         }
1456         dev->dev_ctrl_req->complete = gs_setup_complete;
1457
1458         gadget->ep0->driver_data = dev;
1459
1460         printk(KERN_INFO "gs_bind: %s %s bound\n",
1461                 GS_LONG_NAME, GS_VERSION_STR);
1462
1463         return 0;
1464
1465 autoconf_fail:
1466         printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
1467         return -ENODEV;
1468 }
1469
1470 /*
1471  * gs_unbind
1472  *
1473  * Called on module unload.  Frees the control request and device
1474  * structure.
1475  */
1476 static void __exit gs_unbind(struct usb_gadget *gadget)
1477 {
1478         struct gs_dev *dev = get_gadget_data(gadget);
1479
1480         gs_device = NULL;
1481
1482         /* read/write requests already freed, only control request remains */
1483         if (dev != NULL) {
1484                 if (dev->dev_ctrl_req != NULL) {
1485                         gs_free_req(gadget->ep0, dev->dev_ctrl_req);
1486                         dev->dev_ctrl_req = NULL;
1487                 }
1488                 gs_free_ports(dev);
1489                 kfree(dev);
1490                 set_gadget_data(gadget, NULL);
1491         }
1492
1493         printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
1494                 GS_VERSION_STR);
1495 }
1496
1497 /*
1498  * gs_setup
1499  *
1500  * Implements all the control endpoint functionality that's not
1501  * handled in hardware or the hardware driver.
1502  *
1503  * Returns the size of the data sent to the host, or a negative
1504  * error number.
1505  */
1506 static int gs_setup(struct usb_gadget *gadget,
1507         const struct usb_ctrlrequest *ctrl)
1508 {
1509         int ret = -EOPNOTSUPP;
1510         struct gs_dev *dev = get_gadget_data(gadget);
1511         struct usb_request *req = dev->dev_ctrl_req;
1512         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1513         u16 wValue = le16_to_cpu(ctrl->wValue);
1514         u16 wLength = le16_to_cpu(ctrl->wLength);
1515
1516         switch (ctrl->bRequestType & USB_TYPE_MASK) {
1517         case USB_TYPE_STANDARD:
1518                 ret = gs_setup_standard(gadget,ctrl);
1519                 break;
1520
1521         case USB_TYPE_CLASS:
1522                 ret = gs_setup_class(gadget,ctrl);
1523                 break;
1524
1525         default:
1526                 printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1527                         ctrl->bRequestType, ctrl->bRequest,
1528                         wValue, wIndex, wLength);
1529                 break;
1530         }
1531
1532         /* respond with data transfer before status phase? */
1533         if (ret >= 0) {
1534                 req->length = ret;
1535                 req->zero = ret < wLength
1536                                 && (ret % gadget->ep0->maxpacket) == 0;
1537                 ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1538                 if (ret < 0) {
1539                         printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
1540                                 ret);
1541                         req->status = 0;
1542                         gs_setup_complete(gadget->ep0, req);
1543                 }
1544         }
1545
1546         /* device either stalls (ret < 0) or reports success */
1547         return ret;
1548 }
1549
1550 static int gs_setup_standard(struct usb_gadget *gadget,
1551         const struct usb_ctrlrequest *ctrl)
1552 {
1553         int ret = -EOPNOTSUPP;
1554         struct gs_dev *dev = get_gadget_data(gadget);
1555         struct usb_request *req = dev->dev_ctrl_req;
1556         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1557         u16 wValue = le16_to_cpu(ctrl->wValue);
1558         u16 wLength = le16_to_cpu(ctrl->wLength);
1559
1560         switch (ctrl->bRequest) {
1561         case USB_REQ_GET_DESCRIPTOR:
1562                 if (ctrl->bRequestType != USB_DIR_IN)
1563                         break;
1564
1565                 switch (wValue >> 8) {
1566                 case USB_DT_DEVICE:
1567                         ret = min(wLength,
1568                                 (u16)sizeof(struct usb_device_descriptor));
1569                         memcpy(req->buf, &gs_device_desc, ret);
1570                         break;
1571
1572 #ifdef CONFIG_USB_GADGET_DUALSPEED
1573                 case USB_DT_DEVICE_QUALIFIER:
1574                         if (!gadget->is_dualspeed)
1575                                 break;
1576                         ret = min(wLength,
1577                                 (u16)sizeof(struct usb_qualifier_descriptor));
1578                         memcpy(req->buf, &gs_qualifier_desc, ret);
1579                         break;
1580
1581                 case USB_DT_OTHER_SPEED_CONFIG:
1582                         if (!gadget->is_dualspeed)
1583                                 break;
1584                         /* fall through */
1585 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1586                 case USB_DT_CONFIG:
1587                         ret = gs_build_config_buf(req->buf, gadget->speed,
1588                                 wValue >> 8, wValue & 0xff,
1589                                 gadget->is_otg);
1590                         if (ret >= 0)
1591                                 ret = min(wLength, (u16)ret);
1592                         break;
1593
1594                 case USB_DT_STRING:
1595                         /* wIndex == language code. */
1596                         ret = usb_gadget_get_string(&gs_string_table,
1597                                 wValue & 0xff, req->buf);
1598                         if (ret >= 0)
1599                                 ret = min(wLength, (u16)ret);
1600                         break;
1601                 }
1602                 break;
1603
1604         case USB_REQ_SET_CONFIGURATION:
1605                 if (ctrl->bRequestType != 0)
1606                         break;
1607                 spin_lock(&dev->dev_lock);
1608                 ret = gs_set_config(dev, wValue);
1609                 spin_unlock(&dev->dev_lock);
1610                 break;
1611
1612         case USB_REQ_GET_CONFIGURATION:
1613                 if (ctrl->bRequestType != USB_DIR_IN)
1614                         break;
1615                 *(u8 *)req->buf = dev->dev_config;
1616                 ret = min(wLength, (u16)1);
1617                 break;
1618
1619         case USB_REQ_SET_INTERFACE:
1620                 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1621                                 || !dev->dev_config
1622                                 || wIndex >= GS_MAX_NUM_INTERFACES)
1623                         break;
1624                 if (dev->dev_config == GS_BULK_CONFIG_ID
1625                                 && wIndex != GS_BULK_INTERFACE_ID)
1626                         break;
1627                 /* no alternate interface settings */
1628                 if (wValue != 0)
1629                         break;
1630                 spin_lock(&dev->dev_lock);
1631                 /* PXA hardware partially handles SET_INTERFACE;
1632                  * we need to kluge around that interference.  */
1633                 if (gadget_is_pxa(gadget)) {
1634                         ret = gs_set_config(dev, use_acm ?
1635                                 GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
1636                         goto set_interface_done;
1637                 }
1638                 if (dev->dev_config != GS_BULK_CONFIG_ID
1639                                 && wIndex == GS_CONTROL_INTERFACE_ID) {
1640                         if (dev->dev_notify_ep) {
1641                                 usb_ep_disable(dev->dev_notify_ep);
1642                                 usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
1643                         }
1644                 } else {
1645                         usb_ep_disable(dev->dev_in_ep);
1646                         usb_ep_disable(dev->dev_out_ep);
1647                         usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
1648                         usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
1649                 }
1650                 ret = 0;
1651 set_interface_done:
1652                 spin_unlock(&dev->dev_lock);
1653                 break;
1654
1655         case USB_REQ_GET_INTERFACE:
1656                 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1657                 || dev->dev_config == GS_NO_CONFIG_ID)
1658                         break;
1659                 if (wIndex >= GS_MAX_NUM_INTERFACES
1660                                 || (dev->dev_config == GS_BULK_CONFIG_ID
1661                                 && wIndex != GS_BULK_INTERFACE_ID)) {
1662                         ret = -EDOM;
1663                         break;
1664                 }
1665                 /* no alternate interface settings */
1666                 *(u8 *)req->buf = 0;
1667                 ret = min(wLength, (u16)1);
1668                 break;
1669
1670         default:
1671                 printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1672                         ctrl->bRequestType, ctrl->bRequest,
1673                         wValue, wIndex, wLength);
1674                 break;
1675         }
1676
1677         return ret;
1678 }
1679
1680 static int gs_setup_class(struct usb_gadget *gadget,
1681         const struct usb_ctrlrequest *ctrl)
1682 {
1683         int ret = -EOPNOTSUPP;
1684         struct gs_dev *dev = get_gadget_data(gadget);
1685         struct gs_port *port = dev->dev_port[0];        /* ACM only has one port */
1686         struct usb_request *req = dev->dev_ctrl_req;
1687         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1688         u16 wValue = le16_to_cpu(ctrl->wValue);
1689         u16 wLength = le16_to_cpu(ctrl->wLength);
1690
1691         switch (ctrl->bRequest) {
1692         case USB_CDC_REQ_SET_LINE_CODING:
1693                 ret = min(wLength,
1694                         (u16)sizeof(struct usb_cdc_line_coding));
1695                 if (port) {
1696                         spin_lock(&port->port_lock);
1697                         memcpy(&port->port_line_coding, req->buf, ret);
1698                         spin_unlock(&port->port_lock);
1699                 }
1700                 break;
1701
1702         case USB_CDC_REQ_GET_LINE_CODING:
1703                 port = dev->dev_port[0];        /* ACM only has one port */
1704                 ret = min(wLength,
1705                         (u16)sizeof(struct usb_cdc_line_coding));
1706                 if (port) {
1707                         spin_lock(&port->port_lock);
1708                         memcpy(req->buf, &port->port_line_coding, ret);
1709                         spin_unlock(&port->port_lock);
1710                 }
1711                 break;
1712
1713         case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
1714                 ret = 0;
1715                 break;
1716
1717         default:
1718                 printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1719                         ctrl->bRequestType, ctrl->bRequest,
1720                         wValue, wIndex, wLength);
1721                 break;
1722         }
1723
1724         return ret;
1725 }
1726
1727 /*
1728  * gs_setup_complete
1729  */
1730 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
1731 {
1732         if (req->status || req->actual != req->length) {
1733                 printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
1734                         req->status, req->actual, req->length);
1735         }
1736 }
1737
1738 /*
1739  * gs_disconnect
1740  *
1741  * Called when the device is disconnected.  Frees the closed
1742  * ports and disconnects open ports.  Open ports will be freed
1743  * on close.  Then reallocates the ports for the next connection.
1744  */
1745 static void gs_disconnect(struct usb_gadget *gadget)
1746 {
1747         unsigned long flags;
1748         struct gs_dev *dev = get_gadget_data(gadget);
1749
1750         spin_lock_irqsave(&dev->dev_lock, flags);
1751
1752         gs_reset_config(dev);
1753
1754         /* free closed ports and disconnect open ports */
1755         /* (open ports will be freed when closed) */
1756         gs_free_ports(dev);
1757
1758         /* re-allocate ports for the next connection */
1759         if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
1760                 printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
1761
1762         spin_unlock_irqrestore(&dev->dev_lock, flags);
1763
1764         printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
1765 }
1766
1767 /*
1768  * gs_set_config
1769  *
1770  * Configures the device by enabling device specific
1771  * optimizations, setting up the endpoints, allocating
1772  * read and write requests and queuing read requests.
1773  *
1774  * The device lock must be held when calling this function.
1775  */
1776 static int gs_set_config(struct gs_dev *dev, unsigned config)
1777 {
1778         int i;
1779         int ret = 0;
1780         struct usb_gadget *gadget = dev->dev_gadget;
1781         struct usb_ep *ep;
1782         struct usb_endpoint_descriptor *ep_desc;
1783         struct usb_request *req;
1784         struct gs_req_entry *req_entry;
1785
1786         if (dev == NULL) {
1787                 printk(KERN_ERR "gs_set_config: NULL device pointer\n");
1788                 return 0;
1789         }
1790
1791         if (config == dev->dev_config)
1792                 return 0;
1793
1794         gs_reset_config(dev);
1795
1796         switch (config) {
1797         case GS_NO_CONFIG_ID:
1798                 return 0;
1799         case GS_BULK_CONFIG_ID:
1800                 if (use_acm)
1801                         return -EINVAL;
1802                 /* device specific optimizations */
1803                 if (gadget_is_net2280(gadget))
1804                         net2280_set_fifo_mode(gadget, 1);
1805                 break;
1806         case GS_ACM_CONFIG_ID:
1807                 if (!use_acm)
1808                         return -EINVAL;
1809                 /* device specific optimizations */
1810                 if (gadget_is_net2280(gadget))
1811                         net2280_set_fifo_mode(gadget, 1);
1812                 break;
1813         default:
1814                 return -EINVAL;
1815         }
1816
1817         dev->dev_config = config;
1818
1819         gadget_for_each_ep(ep, gadget) {
1820
1821                 if (EP_NOTIFY_NAME
1822                 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
1823                         ep_desc = GS_SPEED_SELECT(
1824                                 gadget->speed == USB_SPEED_HIGH,
1825                                 &gs_highspeed_notify_desc,
1826                                 &gs_fullspeed_notify_desc);
1827                         ret = usb_ep_enable(ep,ep_desc);
1828                         if (ret == 0) {
1829                                 ep->driver_data = dev;
1830                                 dev->dev_notify_ep = ep;
1831                                 dev->dev_notify_ep_desc = ep_desc;
1832                         } else {
1833                                 printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
1834                                         ep->name, ret);
1835                                 goto exit_reset_config;
1836                         }
1837                 }
1838
1839                 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
1840                         ep_desc = GS_SPEED_SELECT(
1841                                 gadget->speed == USB_SPEED_HIGH,
1842                                 &gs_highspeed_in_desc,
1843                                 &gs_fullspeed_in_desc);
1844                         ret = usb_ep_enable(ep,ep_desc);
1845                         if (ret == 0) {
1846                                 ep->driver_data = dev;
1847                                 dev->dev_in_ep = ep;
1848                                 dev->dev_in_ep_desc = ep_desc;
1849                         } else {
1850                                 printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
1851                                         ep->name, ret);
1852                                 goto exit_reset_config;
1853                         }
1854                 }
1855
1856                 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
1857                         ep_desc = GS_SPEED_SELECT(
1858                                 gadget->speed == USB_SPEED_HIGH,
1859                                 &gs_highspeed_out_desc,
1860                                 &gs_fullspeed_out_desc);
1861                         ret = usb_ep_enable(ep,ep_desc);
1862                         if (ret == 0) {
1863                                 ep->driver_data = dev;
1864                                 dev->dev_out_ep = ep;
1865                                 dev->dev_out_ep_desc = ep_desc;
1866                         } else {
1867                                 printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
1868                                         ep->name, ret);
1869                                 goto exit_reset_config;
1870                         }
1871                 }
1872
1873         }
1874
1875         if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
1876         || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
1877                 printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
1878                 ret = -ENODEV;
1879                 goto exit_reset_config;
1880         }
1881
1882         /* allocate and queue read requests */
1883         ep = dev->dev_out_ep;
1884         for (i=0; i<read_q_size && ret == 0; i++) {
1885                 if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
1886                         req->complete = gs_read_complete;
1887                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1888                                 printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
1889                                         ret);
1890                         }
1891                 } else {
1892                         printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
1893                         ret = -ENOMEM;
1894                         goto exit_reset_config;
1895                 }
1896         }
1897
1898         /* allocate write requests, and put on free list */
1899         ep = dev->dev_in_ep;
1900         for (i=0; i<write_q_size; i++) {
1901                 if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
1902                         req_entry->re_req->complete = gs_write_complete;
1903                         list_add(&req_entry->re_entry, &dev->dev_req_list);
1904                 } else {
1905                         printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
1906                         ret = -ENOMEM;
1907                         goto exit_reset_config;
1908                 }
1909         }
1910
1911         printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
1912                 GS_LONG_NAME,
1913                 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
1914                 config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
1915
1916         return 0;
1917
1918 exit_reset_config:
1919         gs_reset_config(dev);
1920         return ret;
1921 }
1922
1923 /*
1924  * gs_reset_config
1925  *
1926  * Mark the device as not configured, disable all endpoints,
1927  * which forces completion of pending I/O and frees queued
1928  * requests, and free the remaining write requests on the
1929  * free list.
1930  *
1931  * The device lock must be held when calling this function.
1932  */
1933 static void gs_reset_config(struct gs_dev *dev)
1934 {
1935         struct gs_req_entry *req_entry;
1936
1937         if (dev == NULL) {
1938                 printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
1939                 return;
1940         }
1941
1942         if (dev->dev_config == GS_NO_CONFIG_ID)
1943                 return;
1944
1945         dev->dev_config = GS_NO_CONFIG_ID;
1946
1947         /* free write requests on the free list */
1948         while(!list_empty(&dev->dev_req_list)) {
1949                 req_entry = list_entry(dev->dev_req_list.next,
1950                         struct gs_req_entry, re_entry);
1951                 list_del(&req_entry->re_entry);
1952                 gs_free_req_entry(dev->dev_in_ep, req_entry);
1953         }
1954
1955         /* disable endpoints, forcing completion of pending i/o; */
1956         /* completion handlers free their requests in this case */
1957         if (dev->dev_notify_ep) {
1958                 usb_ep_disable(dev->dev_notify_ep);
1959                 dev->dev_notify_ep = NULL;
1960         }
1961         if (dev->dev_in_ep) {
1962                 usb_ep_disable(dev->dev_in_ep);
1963                 dev->dev_in_ep = NULL;
1964         }
1965         if (dev->dev_out_ep) {
1966                 usb_ep_disable(dev->dev_out_ep);
1967                 dev->dev_out_ep = NULL;
1968         }
1969 }
1970
1971 /*
1972  * gs_build_config_buf
1973  *
1974  * Builds the config descriptors in the given buffer and returns the
1975  * length, or a negative error number.
1976  */
1977 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
1978         u8 type, unsigned int index, int is_otg)
1979 {
1980         int len;
1981         int high_speed;
1982         const struct usb_config_descriptor *config_desc;
1983         const struct usb_descriptor_header **function;
1984
1985         if (index >= gs_device_desc.bNumConfigurations)
1986                 return -EINVAL;
1987
1988         /* other speed switches high and full speed */
1989         high_speed = (speed == USB_SPEED_HIGH);
1990         if (type == USB_DT_OTHER_SPEED_CONFIG)
1991                 high_speed = !high_speed;
1992
1993         if (use_acm) {
1994                 config_desc = &gs_acm_config_desc;
1995                 function = GS_SPEED_SELECT(high_speed,
1996                         gs_acm_highspeed_function,
1997                         gs_acm_fullspeed_function);
1998         } else {
1999                 config_desc = &gs_bulk_config_desc;
2000                 function = GS_SPEED_SELECT(high_speed,
2001                         gs_bulk_highspeed_function,
2002                         gs_bulk_fullspeed_function);
2003         }
2004
2005         /* for now, don't advertise srp-only devices */
2006         if (!is_otg)
2007                 function++;
2008
2009         len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
2010         if (len < 0)
2011                 return len;
2012
2013         ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
2014
2015         return len;
2016 }
2017
2018 /*
2019  * gs_alloc_req
2020  *
2021  * Allocate a usb_request and its buffer.  Returns a pointer to the
2022  * usb_request or NULL if there is an error.
2023  */
2024 static struct usb_request *
2025 gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
2026 {
2027         struct usb_request *req;
2028
2029         if (ep == NULL)
2030                 return NULL;
2031
2032         req = usb_ep_alloc_request(ep, kmalloc_flags);
2033
2034         if (req != NULL) {
2035                 req->length = len;
2036                 req->buf = kmalloc(len, kmalloc_flags);
2037                 if (req->buf == NULL) {
2038                         usb_ep_free_request(ep, req);
2039                         return NULL;
2040                 }
2041         }
2042
2043         return req;
2044 }
2045
2046 /*
2047  * gs_free_req
2048  *
2049  * Free a usb_request and its buffer.
2050  */
2051 static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
2052 {
2053         if (ep != NULL && req != NULL) {
2054                 kfree(req->buf);
2055                 usb_ep_free_request(ep, req);
2056         }
2057 }
2058
2059 /*
2060  * gs_alloc_req_entry
2061  *
2062  * Allocates a request and its buffer, using the given
2063  * endpoint, buffer len, and kmalloc flags.
2064  */
2065 static struct gs_req_entry *
2066 gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
2067 {
2068         struct gs_req_entry     *req;
2069
2070         req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
2071         if (req == NULL)
2072                 return NULL;
2073
2074         req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
2075         if (req->re_req == NULL) {
2076                 kfree(req);
2077                 return NULL;
2078         }
2079
2080         req->re_req->context = req;
2081
2082         return req;
2083 }
2084
2085 /*
2086  * gs_free_req_entry
2087  *
2088  * Frees a request and its buffer.
2089  */
2090 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
2091 {
2092         if (ep != NULL && req != NULL) {
2093                 if (req->re_req != NULL)
2094                         gs_free_req(ep, req->re_req);
2095                 kfree(req);
2096         }
2097 }
2098
2099 /*
2100  * gs_alloc_ports
2101  *
2102  * Allocate all ports and set the gs_dev struct to point to them.
2103  * Return 0 if successful, or a negative error number.
2104  *
2105  * The device lock is normally held when calling this function.
2106  */
2107 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
2108 {
2109         int i;
2110         struct gs_port *port;
2111
2112         if (dev == NULL)
2113                 return -EIO;
2114
2115         for (i=0; i<GS_NUM_PORTS; i++) {
2116                 if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
2117                         return -ENOMEM;
2118
2119                 port->port_dev = dev;
2120                 port->port_num = i;
2121                 port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
2122                 port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
2123                 port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
2124                 port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
2125                 spin_lock_init(&port->port_lock);
2126                 init_waitqueue_head(&port->port_write_wait);
2127
2128                 dev->dev_port[i] = port;
2129         }
2130
2131         return 0;
2132 }
2133
2134 /*
2135  * gs_free_ports
2136  *
2137  * Free all closed ports.  Open ports are disconnected by
2138  * freeing their write buffers, setting their device pointers
2139  * and the pointers to them in the device to NULL.  These
2140  * ports will be freed when closed.
2141  *
2142  * The device lock is normally held when calling this function.
2143  */
2144 static void gs_free_ports(struct gs_dev *dev)
2145 {
2146         int i;
2147         unsigned long flags;
2148         struct gs_port *port;
2149
2150         if (dev == NULL)
2151                 return;
2152
2153         for (i=0; i<GS_NUM_PORTS; i++) {
2154                 if ((port=dev->dev_port[i]) != NULL) {
2155                         dev->dev_port[i] = NULL;
2156
2157                         spin_lock_irqsave(&port->port_lock, flags);
2158
2159                         if (port->port_write_buf != NULL) {
2160                                 gs_buf_free(port->port_write_buf);
2161                                 port->port_write_buf = NULL;
2162                         }
2163
2164                         if (port->port_open_count > 0 || port->port_in_use) {
2165                                 port->port_dev = NULL;
2166                                 wake_up_interruptible(&port->port_write_wait);
2167                                 if (port->port_tty) {
2168                                         wake_up_interruptible(&port->port_tty->read_wait);
2169                                         wake_up_interruptible(&port->port_tty->write_wait);
2170                                 }
2171                                 spin_unlock_irqrestore(&port->port_lock, flags);
2172                         } else {
2173                                 spin_unlock_irqrestore(&port->port_lock, flags);
2174                                 kfree(port);
2175                         }
2176
2177                 }
2178         }
2179 }
2180
2181 /* Circular Buffer */
2182
2183 /*
2184  * gs_buf_alloc
2185  *
2186  * Allocate a circular buffer and all associated memory.
2187  */
2188 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
2189 {
2190         struct gs_buf *gb;
2191
2192         if (size == 0)
2193                 return NULL;
2194
2195         gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags);
2196         if (gb == NULL)
2197                 return NULL;
2198
2199         gb->buf_buf = kmalloc(size, kmalloc_flags);
2200         if (gb->buf_buf == NULL) {
2201                 kfree(gb);
2202                 return NULL;
2203         }
2204
2205         gb->buf_size = size;
2206         gb->buf_get = gb->buf_put = gb->buf_buf;
2207
2208         return gb;
2209 }
2210
2211 /*
2212  * gs_buf_free
2213  *
2214  * Free the buffer and all associated memory.
2215  */
2216 void gs_buf_free(struct gs_buf *gb)
2217 {
2218         if (gb) {
2219                 kfree(gb->buf_buf);
2220                 kfree(gb);
2221         }
2222 }
2223
2224 /*
2225  * gs_buf_clear
2226  *
2227  * Clear out all data in the circular buffer.
2228  */
2229 void gs_buf_clear(struct gs_buf *gb)
2230 {
2231         if (gb != NULL)
2232                 gb->buf_get = gb->buf_put;
2233                 /* equivalent to a get of all data available */
2234 }
2235
2236 /*
2237  * gs_buf_data_avail
2238  *
2239  * Return the number of bytes of data available in the circular
2240  * buffer.
2241  */
2242 unsigned int gs_buf_data_avail(struct gs_buf *gb)
2243 {
2244         if (gb != NULL)
2245                 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
2246         else
2247                 return 0;
2248 }
2249
2250 /*
2251  * gs_buf_space_avail
2252  *
2253  * Return the number of bytes of space available in the circular
2254  * buffer.
2255  */
2256 unsigned int gs_buf_space_avail(struct gs_buf *gb)
2257 {
2258         if (gb != NULL)
2259                 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
2260         else
2261                 return 0;
2262 }
2263
2264 /*
2265  * gs_buf_put
2266  *
2267  * Copy data data from a user buffer and put it into the circular buffer.
2268  * Restrict to the amount of space available.
2269  *
2270  * Return the number of bytes copied.
2271  */
2272 unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
2273 {
2274         unsigned int len;
2275
2276         if (gb == NULL)
2277                 return 0;
2278
2279         len  = gs_buf_space_avail(gb);
2280         if (count > len)
2281                 count = len;
2282
2283         if (count == 0)
2284                 return 0;
2285
2286         len = gb->buf_buf + gb->buf_size - gb->buf_put;
2287         if (count > len) {
2288                 memcpy(gb->buf_put, buf, len);
2289                 memcpy(gb->buf_buf, buf+len, count - len);
2290                 gb->buf_put = gb->buf_buf + count - len;
2291         } else {
2292                 memcpy(gb->buf_put, buf, count);
2293                 if (count < len)
2294                         gb->buf_put += count;
2295                 else /* count == len */
2296                         gb->buf_put = gb->buf_buf;
2297         }
2298
2299         return count;
2300 }
2301
2302 /*
2303  * gs_buf_get
2304  *
2305  * Get data from the circular buffer and copy to the given buffer.
2306  * Restrict to the amount of data available.
2307  *
2308  * Return the number of bytes copied.
2309  */
2310 unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
2311 {
2312         unsigned int len;
2313
2314         if (gb == NULL)
2315                 return 0;
2316
2317         len = gs_buf_data_avail(gb);
2318         if (count > len)
2319                 count = len;
2320
2321         if (count == 0)
2322                 return 0;
2323
2324         len = gb->buf_buf + gb->buf_size - gb->buf_get;
2325         if (count > len) {
2326                 memcpy(buf, gb->buf_get, len);
2327                 memcpy(buf+len, gb->buf_buf, count - len);
2328                 gb->buf_get = gb->buf_buf + count - len;
2329         } else {
2330                 memcpy(buf, gb->buf_get, count);
2331                 if (count < len)
2332                         gb->buf_get += count;
2333                 else /* count == len */
2334                         gb->buf_get = gb->buf_buf;
2335         }
2336
2337         return count;
2338 }