git.oblomov.eu Git - linux-2.6/blob - drivers/net/enc28j60.c

   1 /*
   2  * Microchip ENC28J60 ethernet driver (MAC + PHY)
   3  *
   4  * Copyright (C) 2007 Eurek srl
   5  * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
   6  * based on enc28j60.c written by David Anders for 2.4 kernel version
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/types.h>
  19 #include <linux/fcntl.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/slab.h>
  22 #include <linux/string.h>
  23 #include <linux/errno.h>
  24 #include <linux/init.h>
  25 #include <linux/netdevice.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/ethtool.h>
  28 #include <linux/tcp.h>
  29 #include <linux/skbuff.h>
  30 #include <linux/delay.h>
  31 #include <linux/spi/spi.h>
  32
  33 #include "enc28j60_hw.h"
  34
  35 #define DRV_NAME        "enc28j60"
  36 #define DRV_VERSION     "1.01"
  37
  38 #define SPI_OPLEN       1
  39
  40 #define ENC28J60_MSG_DEFAULT    \
  41         (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
  42
  43 /* Buffer size required for the largest SPI transfer (i.e., reading a
  44  * frame). */
  45 #define SPI_TRANSFER_BUF_LEN    (4 + MAX_FRAMELEN)
  46
  47 #define TX_TIMEOUT      (4 * HZ)
  48
  49 /* Max TX retries in case of collision as suggested by errata datasheet */
  50 #define MAX_TX_RETRYCOUNT       16
  51
  52 enum {
  53         RXFILTER_NORMAL,
  54         RXFILTER_MULTI,
  55         RXFILTER_PROMISC
  56 };
  57
  58 /* Driver local data */
  59 struct enc28j60_net {
  60         struct net_device *netdev;
  61         struct spi_device *spi;
  62         struct mutex lock;
  63         struct sk_buff *tx_skb;
  64         struct work_struct tx_work;
  65         struct work_struct irq_work;
  66         struct work_struct setrx_work;
  67         struct work_struct restart_work;
  68         u8 bank;                /* current register bank selected */
  69         u16 next_pk_ptr;        /* next packet pointer within FIFO */
  70         u16 max_pk_counter;     /* statistics: max packet counter */
  71         u16 tx_retry_count;
  72         bool hw_enable;
  73         bool full_duplex;
  74         int rxfilter;
  75         u32 msg_enable;
  76         u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
  77 };
  78
  79 /* use ethtool to change the level for any given device */
  80 static struct {
  81         u32 msg_enable;
  82 } debug = { -1 };
  83
  84 /*
  85  * SPI read buffer
  86  * wait for the SPI transfer and copy received data to destination
  87  */
  88 static int
  89 spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
  90 {
  91         u8 *rx_buf = priv->spi_transfer_buf + 4;
  92         u8 *tx_buf = priv->spi_transfer_buf;
  93         struct spi_transfer t = {
  94                 .tx_buf = tx_buf,
  95                 .rx_buf = rx_buf,
  96                 .len = SPI_OPLEN + len,
  97         };
  98         struct spi_message msg;
  99         int ret;
 100
 101         tx_buf[0] = ENC28J60_READ_BUF_MEM;
 102         tx_buf[1] = tx_buf[2] = tx_buf[3] = 0;  /* don't care */
 103
 104         spi_message_init(&msg);
 105         spi_message_add_tail(&t, &msg);
 106         ret = spi_sync(priv->spi, &msg);
 107         if (ret == 0) {
 108                 memcpy(data, &rx_buf[SPI_OPLEN], len);
 109                 ret = msg.status;
 110         }
 111         if (ret && netif_msg_drv(priv))
 112                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 113                         __func__, ret);
 114
 115         return ret;
 116 }
 117
 118 /*
 119  * SPI write buffer
 120  */
 121 static int spi_write_buf(struct enc28j60_net *priv, int len,
 122                          const u8 *data)
 123 {
 124         int ret;
 125
 126         if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
 127                 ret = -EINVAL;
 128         else {
 129                 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
 130                 memcpy(&priv->spi_transfer_buf[1], data, len);
 131                 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
 132                 if (ret && netif_msg_drv(priv))
 133                         printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 134                                 __func__, ret);
 135         }
 136         return ret;
 137 }
 138
 139 /*
 140  * basic SPI read operation
 141  */
 142 static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
 143                            u8 addr)
 144 {
 145         u8 tx_buf[2];
 146         u8 rx_buf[4];
 147         u8 val = 0;
 148         int ret;
 149         int slen = SPI_OPLEN;
 150
 151         /* do dummy read if needed */
 152         if (addr & SPRD_MASK)
 153                 slen++;
 154
 155         tx_buf[0] = op | (addr & ADDR_MASK);
 156         ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
 157         if (ret)
 158                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 159                         __func__, ret);
 160         else
 161                 val = rx_buf[slen - 1];
 162
 163         return val;
 164 }
 165
 166 /*
 167  * basic SPI write operation
 168  */
 169 static int spi_write_op(struct enc28j60_net *priv, u8 op,
 170                         u8 addr, u8 val)
 171 {
 172         int ret;
 173
 174         priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
 175         priv->spi_transfer_buf[1] = val;
 176         ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
 177         if (ret && netif_msg_drv(priv))
 178                 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
 179                         __func__, ret);
 180         return ret;
 181 }
 182
 183 static void enc28j60_soft_reset(struct enc28j60_net *priv)
 184 {
 185         if (netif_msg_hw(priv))
 186                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
 187
 188         spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
 189         /* Errata workaround #1, CLKRDY check is unreliable,
 190          * delay at least 1 mS instead */
 191         udelay(2000);
 192 }
 193
 194 /*
 195  * select the current register bank if necessary
 196  */
 197 static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
 198 {
 199         u8 b = (addr & BANK_MASK) >> 5;
 200
 201         /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
 202          * are present in all banks, no need to switch bank
 203          */
 204         if (addr >= EIE && addr <= ECON1)
 205                 return;
 206
 207         /* Clear or set each bank selection bit as needed */
 208         if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
 209                 if (b & ECON1_BSEL0)
 210                         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
 211                                         ECON1_BSEL0);
 212                 else
 213                         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
 214                                         ECON1_BSEL0);
 215         }
 216         if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
 217                 if (b & ECON1_BSEL1)
 218                         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
 219                                         ECON1_BSEL1);
 220                 else
 221                         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
 222                                         ECON1_BSEL1);
 223         }
 224         priv->bank = b;
 225 }
 226
 227 /*
 228  * Register access routines through the SPI bus.
 229  * Every register access comes in two flavours:
 230  * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
 231  *   atomically more than one register
 232  * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
 233  *
 234  * Some registers can be accessed through the bit field clear and
 235  * bit field set to avoid a read modify write cycle.
 236  */
 237
 238 /*
 239  * Register bit field Set
 240  */
 241 static void nolock_reg_bfset(struct enc28j60_net *priv,
 242                                       u8 addr, u8 mask)
 243 {
 244         enc28j60_set_bank(priv, addr);
 245         spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
 246 }
 247
 248 static void locked_reg_bfset(struct enc28j60_net *priv,
 249                                       u8 addr, u8 mask)
 250 {
 251         mutex_lock(&priv->lock);
 252         nolock_reg_bfset(priv, addr, mask);
 253         mutex_unlock(&priv->lock);
 254 }
 255
 256 /*
 257  * Register bit field Clear
 258  */
 259 static void nolock_reg_bfclr(struct enc28j60_net *priv,
 260                                       u8 addr, u8 mask)
 261 {
 262         enc28j60_set_bank(priv, addr);
 263         spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
 264 }
 265
 266 static void locked_reg_bfclr(struct enc28j60_net *priv,
 267                                       u8 addr, u8 mask)
 268 {
 269         mutex_lock(&priv->lock);
 270         nolock_reg_bfclr(priv, addr, mask);
 271         mutex_unlock(&priv->lock);
 272 }
 273
 274 /*
 275  * Register byte read
 276  */
 277 static int nolock_regb_read(struct enc28j60_net *priv,
 278                                      u8 address)
 279 {
 280         enc28j60_set_bank(priv, address);
 281         return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
 282 }
 283
 284 static int locked_regb_read(struct enc28j60_net *priv,
 285                                      u8 address)
 286 {
 287         int ret;
 288
 289         mutex_lock(&priv->lock);
 290         ret = nolock_regb_read(priv, address);
 291         mutex_unlock(&priv->lock);
 292
 293         return ret;
 294 }
 295
 296 /*
 297  * Register word read
 298  */
 299 static int nolock_regw_read(struct enc28j60_net *priv,
 300                                      u8 address)
 301 {
 302         int rl, rh;
 303
 304         enc28j60_set_bank(priv, address);
 305         rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
 306         rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
 307
 308         return (rh << 8) | rl;
 309 }
 310
 311 static int locked_regw_read(struct enc28j60_net *priv,
 312                                      u8 address)
 313 {
 314         int ret;
 315
 316         mutex_lock(&priv->lock);
 317         ret = nolock_regw_read(priv, address);
 318         mutex_unlock(&priv->lock);
 319
 320         return ret;
 321 }
 322
 323 /*
 324  * Register byte write
 325  */
 326 static void nolock_regb_write(struct enc28j60_net *priv,
 327                                        u8 address, u8 data)
 328 {
 329         enc28j60_set_bank(priv, address);
 330         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
 331 }
 332
 333 static void locked_regb_write(struct enc28j60_net *priv,
 334                                        u8 address, u8 data)
 335 {
 336         mutex_lock(&priv->lock);
 337         nolock_regb_write(priv, address, data);
 338         mutex_unlock(&priv->lock);
 339 }
 340
 341 /*
 342  * Register word write
 343  */
 344 static void nolock_regw_write(struct enc28j60_net *priv,
 345                                        u8 address, u16 data)
 346 {
 347         enc28j60_set_bank(priv, address);
 348         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
 349         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
 350                      (u8) (data >> 8));
 351 }
 352
 353 static void locked_regw_write(struct enc28j60_net *priv,
 354                                        u8 address, u16 data)
 355 {
 356         mutex_lock(&priv->lock);
 357         nolock_regw_write(priv, address, data);
 358         mutex_unlock(&priv->lock);
 359 }
 360
 361 /*
 362  * Buffer memory read
 363  * Select the starting address and execute a SPI buffer read
 364  */
 365 static void enc28j60_mem_read(struct enc28j60_net *priv,
 366                                      u16 addr, int len, u8 *data)
 367 {
 368         mutex_lock(&priv->lock);
 369         nolock_regw_write(priv, ERDPTL, addr);
 370 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 371         if (netif_msg_drv(priv)) {
 372                 u16 reg;
 373                 reg = nolock_regw_read(priv, ERDPTL);
 374                 if (reg != addr)
 375                         printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
 376                                 "(0x%04x - 0x%04x)\n", __func__, reg, addr);
 377         }
 378 #endif
 379         spi_read_buf(priv, len, data);
 380         mutex_unlock(&priv->lock);
 381 }
 382
 383 /*
 384  * Write packet to enc28j60 TX buffer memory
 385  */
 386 static void
 387 enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
 388 {
 389         mutex_lock(&priv->lock);
 390         /* Set the write pointer to start of transmit buffer area */
 391         nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
 392 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 393         if (netif_msg_drv(priv)) {
 394                 u16 reg;
 395                 reg = nolock_regw_read(priv, EWRPTL);
 396                 if (reg != TXSTART_INIT)
 397                         printk(KERN_DEBUG DRV_NAME
 398                                 ": %s() ERWPT:0x%04x != 0x%04x\n",
 399                                 __func__, reg, TXSTART_INIT);
 400         }
 401 #endif
 402         /* Set the TXND pointer to correspond to the packet size given */
 403         nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
 404         /* write per-packet control byte */
 405         spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
 406         if (netif_msg_hw(priv))
 407                 printk(KERN_DEBUG DRV_NAME
 408                         ": %s() after control byte ERWPT:0x%04x\n",
 409                         __func__, nolock_regw_read(priv, EWRPTL));
 410         /* copy the packet into the transmit buffer */
 411         spi_write_buf(priv, len, data);
 412         if (netif_msg_hw(priv))
 413                 printk(KERN_DEBUG DRV_NAME
 414                          ": %s() after write packet ERWPT:0x%04x, len=%d\n",
 415                          __func__, nolock_regw_read(priv, EWRPTL), len);
 416         mutex_unlock(&priv->lock);
 417 }
 418
 419 static unsigned long msec20_to_jiffies;
 420
 421 static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
 422 {
 423         unsigned long timeout = jiffies + msec20_to_jiffies;
 424
 425         /* 20 msec timeout read */
 426         while ((nolock_regb_read(priv, reg) & mask) != val) {
 427                 if (time_after(jiffies, timeout)) {
 428                         if (netif_msg_drv(priv))
 429                                 dev_dbg(&priv->spi->dev,
 430                                         "reg %02x ready timeout!\n", reg);
 431                         return -ETIMEDOUT;
 432                 }
 433                 cpu_relax();
 434         }
 435         return 0;
 436 }
 437
 438 /*
 439  * Wait until the PHY operation is complete.
 440  */
 441 static int wait_phy_ready(struct enc28j60_net *priv)
 442 {
 443         return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
 444 }
 445
 446 /*
 447  * PHY register read
 448  * PHY registers are not accessed directly, but through the MII
 449  */
 450 static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
 451 {
 452         u16 ret;
 453
 454         mutex_lock(&priv->lock);
 455         /* set the PHY register address */
 456         nolock_regb_write(priv, MIREGADR, address);
 457         /* start the register read operation */
 458         nolock_regb_write(priv, MICMD, MICMD_MIIRD);
 459         /* wait until the PHY read completes */
 460         wait_phy_ready(priv);
 461         /* quit reading */
 462         nolock_regb_write(priv, MICMD, 0x00);
 463         /* return the data */
 464         ret  = nolock_regw_read(priv, MIRDL);
 465         mutex_unlock(&priv->lock);
 466
 467         return ret;
 468 }
 469
 470 static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
 471 {
 472         int ret;
 473
 474         mutex_lock(&priv->lock);
 475         /* set the PHY register address */
 476         nolock_regb_write(priv, MIREGADR, address);
 477         /* write the PHY data */
 478         nolock_regw_write(priv, MIWRL, data);
 479         /* wait until the PHY write completes and return */
 480         ret = wait_phy_ready(priv);
 481         mutex_unlock(&priv->lock);
 482
 483         return ret;
 484 }
 485
 486 /*
 487  * Program the hardware MAC address from dev->dev_addr.
 488  */
 489 static int enc28j60_set_hw_macaddr(struct net_device *ndev)
 490 {
 491         int ret;
 492         struct enc28j60_net *priv = netdev_priv(ndev);
 493
 494         mutex_lock(&priv->lock);
 495         if (!priv->hw_enable) {
 496                 if (netif_msg_drv(priv))
 497                         printk(KERN_INFO DRV_NAME
 498                                 ": %s: Setting MAC address to %pM\n",
 499                                 ndev->name, ndev->dev_addr);
 500                 /* NOTE: MAC address in ENC28J60 is byte-backward */
 501                 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
 502                 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
 503                 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
 504                 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
 505                 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
 506                 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
 507                 ret = 0;
 508         } else {
 509                 if (netif_msg_drv(priv))
 510                         printk(KERN_DEBUG DRV_NAME
 511                                 ": %s() Hardware must be disabled to set "
 512                                 "Mac address\n", __func__);
 513                 ret = -EBUSY;
 514         }
 515         mutex_unlock(&priv->lock);
 516         return ret;
 517 }
 518
 519 /*
 520  * Store the new hardware address in dev->dev_addr, and update the MAC.
 521  */
 522 static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
 523 {
 524         struct sockaddr *address = addr;
 525
 526         if (netif_running(dev))
 527                 return -EBUSY;
 528         if (!is_valid_ether_addr(address->sa_data))
 529                 return -EADDRNOTAVAIL;
 530
 531         memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
 532         return enc28j60_set_hw_macaddr(dev);
 533 }
 534
 535 /*
 536  * Debug routine to dump useful register contents
 537  */
 538 static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
 539 {
 540         mutex_lock(&priv->lock);
 541         printk(KERN_DEBUG DRV_NAME " %s\n"
 542                 "HwRevID: 0x%02x\n"
 543                 "Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n"
 544                 "       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n"
 545                 "MAC  : MACON1 MACON3 MACON4\n"
 546                 "       0x%02x   0x%02x   0x%02x\n"
 547                 "Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
 548                 "       0x%04x 0x%04x 0x%04x  0x%04x  "
 549                 "0x%02x    0x%02x    0x%04x\n"
 550                 "Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n"
 551                 "       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
 552                 msg, nolock_regb_read(priv, EREVID),
 553                 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
 554                 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
 555                 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
 556                 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
 557                 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
 558                 nolock_regw_read(priv, ERXWRPTL),
 559                 nolock_regw_read(priv, ERXRDPTL),
 560                 nolock_regb_read(priv, ERXFCON),
 561                 nolock_regb_read(priv, EPKTCNT),
 562                 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
 563                 nolock_regw_read(priv, ETXNDL),
 564                 nolock_regb_read(priv, MACLCON1),
 565                 nolock_regb_read(priv, MACLCON2),
 566                 nolock_regb_read(priv, MAPHSUP));
 567         mutex_unlock(&priv->lock);
 568 }
 569
 570 /*
 571  * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
 572  */
 573 static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
 574 {
 575         u16 erxrdpt;
 576
 577         if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
 578                 erxrdpt = end;
 579         else
 580                 erxrdpt = next_packet_ptr - 1;
 581
 582         return erxrdpt;
 583 }
 584
 585 /*
 586  * Calculate wrap around when reading beyond the end of the RX buffer
 587  */
 588 static u16 rx_packet_start(u16 ptr)
 589 {
 590         if (ptr + RSV_SIZE > RXEND_INIT)
 591                 return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
 592         else
 593                 return ptr + RSV_SIZE;
 594 }
 595
 596 static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 597 {
 598         u16 erxrdpt;
 599
 600         if (start > 0x1FFF || end > 0x1FFF || start > end) {
 601                 if (netif_msg_drv(priv))
 602                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
 603                                 "bad parameters!\n", __func__, start, end);
 604                 return;
 605         }
 606         /* set receive buffer start + end */
 607         priv->next_pk_ptr = start;
 608         nolock_regw_write(priv, ERXSTL, start);
 609         erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
 610         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
 611         nolock_regw_write(priv, ERXNDL, end);
 612 }
 613
 614 static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
 615 {
 616         if (start > 0x1FFF || end > 0x1FFF || start > end) {
 617                 if (netif_msg_drv(priv))
 618                         printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
 619                                 "bad parameters!\n", __func__, start, end);
 620                 return;
 621         }
 622         /* set transmit buffer start + end */
 623         nolock_regw_write(priv, ETXSTL, start);
 624         nolock_regw_write(priv, ETXNDL, end);
 625 }
 626
 627 /*
 628  * Low power mode shrinks power consumption about 100x, so we'd like
 629  * the chip to be in that mode whenever it's inactive.  (However, we
 630  * can't stay in lowpower mode during suspend with WOL active.)
 631  */
 632 static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
 633 {
 634         if (netif_msg_drv(priv))
 635                 dev_dbg(&priv->spi->dev, "%s power...\n",
 636                                 is_low ? "low" : "high");
 637
 638         mutex_lock(&priv->lock);
 639         if (is_low) {
 640                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 641                 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
 642                 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
 643                 /* ECON2_VRPS was set during initialization */
 644                 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
 645         } else {
 646                 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
 647                 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
 648                 /* caller sets ECON1_RXEN */
 649         }
 650         mutex_unlock(&priv->lock);
 651 }
 652
 653 static int enc28j60_hw_init(struct enc28j60_net *priv)
 654 {
 655         u8 reg;
 656
 657         if (netif_msg_drv(priv))
 658                 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
 659                         priv->full_duplex ? "FullDuplex" : "HalfDuplex");
 660
 661         mutex_lock(&priv->lock);
 662         /* first reset the chip */
 663         enc28j60_soft_reset(priv);
 664         /* Clear ECON1 */
 665         spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
 666         priv->bank = 0;
 667         priv->hw_enable = false;
 668         priv->tx_retry_count = 0;
 669         priv->max_pk_counter = 0;
 670         priv->rxfilter = RXFILTER_NORMAL;
 671         /* enable address auto increment and voltage regulator powersave */
 672         nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
 673
 674         nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 675         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
 676         mutex_unlock(&priv->lock);
 677
 678         /*
 679          * Check the RevID.
 680          * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
 681          * damaged
 682          */
 683         reg = locked_regb_read(priv, EREVID);
 684         if (netif_msg_drv(priv))
 685                 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
 686         if (reg == 0x00 || reg == 0xff) {
 687                 if (netif_msg_drv(priv))
 688                         printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
 689                                 __func__, reg);
 690                 return 0;
 691         }
 692
 693         /* default filter mode: (unicast OR broadcast) AND crc valid */
 694         locked_regb_write(priv, ERXFCON,
 695                             ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
 696
 697         /* enable MAC receive */
 698         locked_regb_write(priv, MACON1,
 699                             MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
 700         /* enable automatic padding and CRC operations */
 701         if (priv->full_duplex) {
 702                 locked_regb_write(priv, MACON3,
 703                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
 704                                     MACON3_FRMLNEN | MACON3_FULDPX);
 705                 /* set inter-frame gap (non-back-to-back) */
 706                 locked_regb_write(priv, MAIPGL, 0x12);
 707                 /* set inter-frame gap (back-to-back) */
 708                 locked_regb_write(priv, MABBIPG, 0x15);
 709         } else {
 710                 locked_regb_write(priv, MACON3,
 711                                     MACON3_PADCFG0 | MACON3_TXCRCEN |
 712                                     MACON3_FRMLNEN);
 713                 locked_regb_write(priv, MACON4, 1 << 6);        /* DEFER bit */
 714                 /* set inter-frame gap (non-back-to-back) */
 715                 locked_regw_write(priv, MAIPGL, 0x0C12);
 716                 /* set inter-frame gap (back-to-back) */
 717                 locked_regb_write(priv, MABBIPG, 0x12);
 718         }
 719         /*
 720          * MACLCON1 (default)
 721          * MACLCON2 (default)
 722          * Set the maximum packet size which the controller will accept
 723          */
 724         locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
 725
 726         /* Configure LEDs */
 727         if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
 728                 return 0;
 729
 730         if (priv->full_duplex) {
 731                 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
 732                         return 0;
 733                 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
 734                         return 0;
 735         } else {
 736                 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
 737                         return 0;
 738                 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
 739                         return 0;
 740         }
 741         if (netif_msg_hw(priv))
 742                 enc28j60_dump_regs(priv, "Hw initialized.");
 743
 744         return 1;
 745 }
 746
 747 static void enc28j60_hw_enable(struct enc28j60_net *priv)
 748 {
 749         /* enable interrupts */
 750         if (netif_msg_hw(priv))
 751                 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
 752                         __func__);
 753
 754         enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
 755
 756         mutex_lock(&priv->lock);
 757         nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
 758                          EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
 759         nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
 760                           EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
 761
 762         /* enable receive logic */
 763         nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
 764         priv->hw_enable = true;
 765         mutex_unlock(&priv->lock);
 766 }
 767
 768 static void enc28j60_hw_disable(struct enc28j60_net *priv)
 769 {
 770         mutex_lock(&priv->lock);
 771         /* disable interrutps and packet reception */
 772         nolock_regb_write(priv, EIE, 0x00);
 773         nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 774         priv->hw_enable = false;
 775         mutex_unlock(&priv->lock);
 776 }
 777
 778 static int
 779 enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
 780 {
 781         struct enc28j60_net *priv = netdev_priv(ndev);
 782         int ret = 0;
 783
 784         if (!priv->hw_enable) {
 785                 /* link is in low power mode now; duplex setting
 786                  * will take effect on next enc28j60_hw_init().
 787                  */
 788                 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
 789                         priv->full_duplex = (duplex == DUPLEX_FULL);
 790                 else {
 791                         if (netif_msg_link(priv))
 792                                 dev_warn(&ndev->dev,
 793                                         "unsupported link setting\n");
 794                         ret = -EOPNOTSUPP;
 795                 }
 796         } else {
 797                 if (netif_msg_link(priv))
 798                         dev_warn(&ndev->dev, "Warning: hw must be disabled "
 799                                 "to set link mode\n");
 800                 ret = -EBUSY;
 801         }
 802         return ret;
 803 }
 804
 805 /*
 806  * Read the Transmit Status Vector
 807  */
 808 static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
 809 {
 810         int endptr;
 811
 812         endptr = locked_regw_read(priv, ETXNDL);
 813         if (netif_msg_hw(priv))
 814                 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
 815                          endptr + 1);
 816         enc28j60_mem_read(priv, endptr + 1, sizeof(tsv), tsv);
 817 }
 818
 819 static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
 820                                 u8 tsv[TSV_SIZE])
 821 {
 822         u16 tmp1, tmp2;
 823
 824         printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
 825         tmp1 = tsv[1];
 826         tmp1 <<= 8;
 827         tmp1 |= tsv[0];
 828
 829         tmp2 = tsv[5];
 830         tmp2 <<= 8;
 831         tmp2 |= tsv[4];
 832
 833         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
 834                 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
 835         printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
 836                 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
 837                 TSV_GETBIT(tsv, TSV_TXCRCERROR),
 838                 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
 839                 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
 840         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
 841                 "PacketDefer: %d, ExDefer: %d\n",
 842                 TSV_GETBIT(tsv, TSV_TXMULTICAST),
 843                 TSV_GETBIT(tsv, TSV_TXBROADCAST),
 844                 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
 845                 TSV_GETBIT(tsv, TSV_TXEXDEFER));
 846         printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
 847                  "Giant: %d, Underrun: %d\n",
 848                  TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
 849                  TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
 850                  TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
 851         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
 852                  "BackPressApp: %d, VLanTagFrame: %d\n",
 853                  TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
 854                  TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
 855                  TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
 856                  TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
 857 }
 858
 859 /*
 860  * Receive Status vector
 861  */
 862 static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
 863                               u16 pk_ptr, int len, u16 sts)
 864 {
 865         printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
 866                 msg, pk_ptr);
 867         printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
 868                  RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
 869         printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
 870                  " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
 871                  RSV_GETBIT(sts, RSV_CRCERROR),
 872                  RSV_GETBIT(sts, RSV_LENCHECKERR),
 873                  RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
 874         printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
 875                  "LongDropEvent: %d, CarrierEvent: %d\n",
 876                  RSV_GETBIT(sts, RSV_RXMULTICAST),
 877                  RSV_GETBIT(sts, RSV_RXBROADCAST),
 878                  RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
 879                  RSV_GETBIT(sts, RSV_CARRIEREV));
 880         printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
 881                  " UnknownOp: %d, VLanTagFrame: %d\n",
 882                  RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
 883                  RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
 884                  RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
 885                  RSV_GETBIT(sts, RSV_RXTYPEVLAN));
 886 }
 887
 888 static void dump_packet(const char *msg, int len, const char *data)
 889 {
 890         printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
 891         print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
 892                         data, len, true);
 893 }
 894
 895 /*
 896  * Hardware receive function.
 897  * Read the buffer memory, update the FIFO pointer to free the buffer,
 898  * check the status vector and decrement the packet counter.
 899  */
 900 static void enc28j60_hw_rx(struct net_device *ndev)
 901 {
 902         struct enc28j60_net *priv = netdev_priv(ndev);
 903         struct sk_buff *skb = NULL;
 904         u16 erxrdpt, next_packet, rxstat;
 905         u8 rsv[RSV_SIZE];
 906         int len;
 907
 908         if (netif_msg_rx_status(priv))
 909                 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
 910                         priv->next_pk_ptr);
 911
 912         if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
 913                 if (netif_msg_rx_err(priv))
 914                         dev_err(&ndev->dev,
 915                                 "%s() Invalid packet address!! 0x%04x\n",
 916                                 __func__, priv->next_pk_ptr);
 917                 /* packet address corrupted: reset RX logic */
 918                 mutex_lock(&priv->lock);
 919                 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
 920                 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
 921                 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
 922                 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
 923                 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
 924                 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
 925                 mutex_unlock(&priv->lock);
 926                 ndev->stats.rx_errors++;
 927                 return;
 928         }
 929         /* Read next packet pointer and rx status vector */
 930         enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
 931
 932         next_packet = rsv[1];
 933         next_packet <<= 8;
 934         next_packet |= rsv[0];
 935
 936         len = rsv[3];
 937         len <<= 8;
 938         len |= rsv[2];
 939
 940         rxstat = rsv[5];
 941         rxstat <<= 8;
 942         rxstat |= rsv[4];
 943
 944         if (netif_msg_rx_status(priv))
 945                 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
 946
 947         if (!RSV_GETBIT(rxstat, RSV_RXOK)) {
 948                 if (netif_msg_rx_err(priv))
 949                         dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
 950                 ndev->stats.rx_errors++;
 951                 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
 952                         ndev->stats.rx_crc_errors++;
 953                 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
 954                         ndev->stats.rx_frame_errors++;
 955         } else {
 956                 skb = dev_alloc_skb(len + NET_IP_ALIGN);
 957                 if (!skb) {
 958                         if (netif_msg_rx_err(priv))
 959                                 dev_err(&ndev->dev,
 960                                         "out of memory for Rx'd frame\n");
 961                         ndev->stats.rx_dropped++;
 962                 } else {
 963                         skb->dev = ndev;
 964                         skb_reserve(skb, NET_IP_ALIGN);
 965                         /* copy the packet from the receive buffer */
 966                         enc28j60_mem_read(priv,
 967                                 rx_packet_start(priv->next_pk_ptr),
 968                                 len, skb_put(skb, len));
 969                         if (netif_msg_pktdata(priv))
 970                                 dump_packet(__func__, skb->len, skb->data);
 971                         skb->protocol = eth_type_trans(skb, ndev);
 972                         /* update statistics */
 973                         ndev->stats.rx_packets++;
 974                         ndev->stats.rx_bytes += len;
 975                         netif_rx_ni(skb);
 976                 }
 977         }
 978         /*
 979          * Move the RX read pointer to the start of the next
 980          * received packet.
 981          * This frees the memory we just read out
 982          */
 983         erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
 984         if (netif_msg_hw(priv))
 985                 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
 986                         __func__, erxrdpt);
 987
 988         mutex_lock(&priv->lock);
 989         nolock_regw_write(priv, ERXRDPTL, erxrdpt);
 990 #ifdef CONFIG_ENC28J60_WRITEVERIFY
 991         if (netif_msg_drv(priv)) {
 992                 u16 reg;
 993                 reg = nolock_regw_read(priv, ERXRDPTL);
 994                 if (reg != erxrdpt)
 995                         printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
 996                                 "error (0x%04x - 0x%04x)\n", __func__,
 997                                 reg, erxrdpt);
 998         }
 999 #endif
1000         priv->next_pk_ptr = next_packet;
1001         /* we are done with this packet, decrement the packet counter */
1002         nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
1003         mutex_unlock(&priv->lock);
1004 }
1005
1006 /*
1007  * Calculate free space in RxFIFO
1008  */
1009 static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
1010 {
1011         int epkcnt, erxst, erxnd, erxwr, erxrd;
1012         int free_space;
1013
1014         mutex_lock(&priv->lock);
1015         epkcnt = nolock_regb_read(priv, EPKTCNT);
1016         if (epkcnt >= 255)
1017                 free_space = -1;
1018         else {
1019                 erxst = nolock_regw_read(priv, ERXSTL);
1020                 erxnd = nolock_regw_read(priv, ERXNDL);
1021                 erxwr = nolock_regw_read(priv, ERXWRPTL);
1022                 erxrd = nolock_regw_read(priv, ERXRDPTL);
1023
1024                 if (erxwr > erxrd)
1025                         free_space = (erxnd - erxst) - (erxwr - erxrd);
1026                 else if (erxwr == erxrd)
1027                         free_space = (erxnd - erxst);
1028                 else
1029                         free_space = erxrd - erxwr - 1;
1030         }
1031         mutex_unlock(&priv->lock);
1032         if (netif_msg_rx_status(priv))
1033                 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1034                         __func__, free_space);
1035         return free_space;
1036 }
1037
1038 /*
1039  * Access the PHY to determine link status
1040  */
1041 static void enc28j60_check_link_status(struct net_device *ndev)
1042 {
1043         struct enc28j60_net *priv = netdev_priv(ndev);
1044         u16 reg;
1045         int duplex;
1046
1047         reg = enc28j60_phy_read(priv, PHSTAT2);
1048         if (netif_msg_hw(priv))
1049                 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1050                         "PHSTAT2: %04x\n", __func__,
1051                         enc28j60_phy_read(priv, PHSTAT1), reg);
1052         duplex = reg & PHSTAT2_DPXSTAT;
1053
1054         if (reg & PHSTAT2_LSTAT) {
1055                 netif_carrier_on(ndev);
1056                 if (netif_msg_ifup(priv))
1057                         dev_info(&ndev->dev, "link up - %s\n",
1058                                 duplex ? "Full duplex" : "Half duplex");
1059         } else {
1060                 if (netif_msg_ifdown(priv))
1061                         dev_info(&ndev->dev, "link down\n");
1062                 netif_carrier_off(ndev);
1063         }
1064 }
1065
1066 static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1067 {
1068         struct enc28j60_net *priv = netdev_priv(ndev);
1069
1070         if (err)
1071                 ndev->stats.tx_errors++;
1072         else
1073                 ndev->stats.tx_packets++;
1074
1075         if (priv->tx_skb) {
1076                 if (!err)
1077                         ndev->stats.tx_bytes += priv->tx_skb->len;
1078                 dev_kfree_skb(priv->tx_skb);
1079                 priv->tx_skb = NULL;
1080         }
1081         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1082         netif_wake_queue(ndev);
1083 }
1084
1085 /*
1086  * RX handler
1087  * ignore PKTIF because is unreliable! (look at the errata datasheet)
1088  * check EPKTCNT is the suggested workaround.
1089  * We don't need to clear interrupt flag, automatically done when
1090  * enc28j60_hw_rx() decrements the packet counter.
1091  * Returns how many packet processed.
1092  */
1093 static int enc28j60_rx_interrupt(struct net_device *ndev)
1094 {
1095         struct enc28j60_net *priv = netdev_priv(ndev);
1096         int pk_counter, ret;
1097
1098         pk_counter = locked_regb_read(priv, EPKTCNT);
1099         if (pk_counter && netif_msg_intr(priv))
1100                 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1101         if (pk_counter > priv->max_pk_counter) {
1102                 /* update statistics */
1103                 priv->max_pk_counter = pk_counter;
1104                 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1105                         printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1106                                 priv->max_pk_counter);
1107         }
1108         ret = pk_counter;
1109         while (pk_counter-- > 0)
1110                 enc28j60_hw_rx(ndev);
1111
1112         return ret;
1113 }
1114
1115 static void enc28j60_irq_work_handler(struct work_struct *work)
1116 {
1117         struct enc28j60_net *priv =
1118                 container_of(work, struct enc28j60_net, irq_work);
1119         struct net_device *ndev = priv->netdev;
1120         int intflags, loop;
1121
1122         if (netif_msg_intr(priv))
1123                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1124         /* disable further interrupts */
1125         locked_reg_bfclr(priv, EIE, EIE_INTIE);
1126
1127         do {
1128                 loop = 0;
1129                 intflags = locked_regb_read(priv, EIR);
1130                 /* DMA interrupt handler (not currently used) */
1131                 if ((intflags & EIR_DMAIF) != 0) {
1132                         loop++;
1133                         if (netif_msg_intr(priv))
1134                                 printk(KERN_DEBUG DRV_NAME
1135                                         ": intDMA(%d)\n", loop);
1136                         locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1137                 }
1138                 /* LINK changed handler */
1139                 if ((intflags & EIR_LINKIF) != 0) {
1140                         loop++;
1141                         if (netif_msg_intr(priv))
1142                                 printk(KERN_DEBUG DRV_NAME
1143                                         ": intLINK(%d)\n", loop);
1144                         enc28j60_check_link_status(ndev);
1145                         /* read PHIR to clear the flag */
1146                         enc28j60_phy_read(priv, PHIR);
1147                 }
1148                 /* TX complete handler */
1149                 if ((intflags & EIR_TXIF) != 0) {
1150                         bool err = false;
1151                         loop++;
1152                         if (netif_msg_intr(priv))
1153                                 printk(KERN_DEBUG DRV_NAME
1154                                         ": intTX(%d)\n", loop);
1155                         priv->tx_retry_count = 0;
1156                         if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1157                                 if (netif_msg_tx_err(priv))
1158                                         dev_err(&ndev->dev,
1159                                                 "Tx Error (aborted)\n");
1160                                 err = true;
1161                         }
1162                         if (netif_msg_tx_done(priv)) {
1163                                 u8 tsv[TSV_SIZE];
1164                                 enc28j60_read_tsv(priv, tsv);
1165                                 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1166                         }
1167                         enc28j60_tx_clear(ndev, err);
1168                         locked_reg_bfclr(priv, EIR, EIR_TXIF);
1169                 }
1170                 /* TX Error handler */
1171                 if ((intflags & EIR_TXERIF) != 0) {
1172                         u8 tsv[TSV_SIZE];
1173
1174                         loop++;
1175                         if (netif_msg_intr(priv))
1176                                 printk(KERN_DEBUG DRV_NAME
1177                                         ": intTXErr(%d)\n", loop);
1178                         locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1179                         enc28j60_read_tsv(priv, tsv);
1180                         if (netif_msg_tx_err(priv))
1181                                 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1182                         /* Reset TX logic */
1183                         mutex_lock(&priv->lock);
1184                         nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1185                         nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1186                         nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1187                         mutex_unlock(&priv->lock);
1188                         /* Transmit Late collision check for retransmit */
1189                         if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1190                                 if (netif_msg_tx_err(priv))
1191                                         printk(KERN_DEBUG DRV_NAME
1192                                                 ": LateCollision TXErr (%d)\n",
1193                                                 priv->tx_retry_count);
1194                                 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1195                                         locked_reg_bfset(priv, ECON1,
1196                                                            ECON1_TXRTS);
1197                                 else
1198                                         enc28j60_tx_clear(ndev, true);
1199                         } else
1200                                 enc28j60_tx_clear(ndev, true);
1201                         locked_reg_bfclr(priv, EIR, EIR_TXERIF);
1202                 }
1203                 /* RX Error handler */
1204                 if ((intflags & EIR_RXERIF) != 0) {
1205                         loop++;
1206                         if (netif_msg_intr(priv))
1207                                 printk(KERN_DEBUG DRV_NAME
1208                                         ": intRXErr(%d)\n", loop);
1209                         /* Check free FIFO space to flag RX overrun */
1210                         if (enc28j60_get_free_rxfifo(priv) <= 0) {
1211                                 if (netif_msg_rx_err(priv))
1212                                         printk(KERN_DEBUG DRV_NAME
1213                                                 ": RX Overrun\n");
1214                                 ndev->stats.rx_dropped++;
1215                         }
1216                         locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1217                 }
1218                 /* RX handler */
1219                 if (enc28j60_rx_interrupt(ndev))
1220                         loop++;
1221         } while (loop);
1222
1223         /* re-enable interrupts */
1224         locked_reg_bfset(priv, EIE, EIE_INTIE);
1225         if (netif_msg_intr(priv))
1226                 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
1227 }
1228
1229 /*
1230  * Hardware transmit function.
1231  * Fill the buffer memory and send the contents of the transmit buffer
1232  * onto the network
1233  */
1234 static void enc28j60_hw_tx(struct enc28j60_net *priv)
1235 {
1236         if (netif_msg_tx_queued(priv))
1237                 printk(KERN_DEBUG DRV_NAME
1238                         ": Tx Packet Len:%d\n", priv->tx_skb->len);
1239
1240         if (netif_msg_pktdata(priv))
1241                 dump_packet(__func__,
1242                             priv->tx_skb->len, priv->tx_skb->data);
1243         enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1244
1245 #ifdef CONFIG_ENC28J60_WRITEVERIFY
1246         /* readback and verify written data */
1247         if (netif_msg_drv(priv)) {
1248                 int test_len, k;
1249                 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1250                 int okflag;
1251
1252                 test_len = priv->tx_skb->len;
1253                 if (test_len > sizeof(test_buf))
1254                         test_len = sizeof(test_buf);
1255
1256                 /* + 1 to skip control byte */
1257                 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1258                 okflag = 1;
1259                 for (k = 0; k < test_len; k++) {
1260                         if (priv->tx_skb->data[k] != test_buf[k]) {
1261                                 printk(KERN_DEBUG DRV_NAME
1262                                          ": Error, %d location differ: "
1263                                          "0x%02x-0x%02x\n", k,
1264                                          priv->tx_skb->data[k], test_buf[k]);
1265                                 okflag = 0;
1266                         }
1267                 }
1268                 if (!okflag)
1269                         printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1270                                 "verify ERROR!\n");
1271         }
1272 #endif
1273         /* set TX request flag */
1274         locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1275 }
1276
1277 static int enc28j60_send_packet(struct sk_buff *skb, struct net_device *dev)
1278 {
1279         struct enc28j60_net *priv = netdev_priv(dev);
1280
1281         if (netif_msg_tx_queued(priv))
1282                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1283
1284         /* If some error occurs while trying to transmit this
1285          * packet, you should return '1' from this function.
1286          * In such a case you _may not_ do anything to the
1287          * SKB, it is still owned by the network queueing
1288          * layer when an error is returned.  This means you
1289          * may not modify any SKB fields, you may not free
1290          * the SKB, etc.
1291          */
1292         netif_stop_queue(dev);
1293
1294         /* save the timestamp */
1295         priv->netdev->trans_start = jiffies;
1296         /* Remember the skb for deferred processing */
1297         priv->tx_skb = skb;
1298         schedule_work(&priv->tx_work);
1299
1300         return 0;
1301 }
1302
1303 static void enc28j60_tx_work_handler(struct work_struct *work)
1304 {
1305         struct enc28j60_net *priv =
1306                 container_of(work, struct enc28j60_net, tx_work);
1307
1308         /* actual delivery of data */
1309         enc28j60_hw_tx(priv);
1310 }
1311
1312 static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1313 {
1314         struct enc28j60_net *priv = dev_id;
1315
1316         /*
1317          * Can't do anything in interrupt context because we need to
1318          * block (spi_sync() is blocking) so fire of the interrupt
1319          * handling workqueue.
1320          * Remember that we access enc28j60 registers through SPI bus
1321          * via spi_sync() call.
1322          */
1323         schedule_work(&priv->irq_work);
1324
1325         return IRQ_HANDLED;
1326 }
1327
1328 static void enc28j60_tx_timeout(struct net_device *ndev)
1329 {
1330         struct enc28j60_net *priv = netdev_priv(ndev);
1331
1332         if (netif_msg_timer(priv))
1333                 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1334
1335         ndev->stats.tx_errors++;
1336         /* can't restart safely under softirq */
1337         schedule_work(&priv->restart_work);
1338 }
1339
1340 /*
1341  * Open/initialize the board. This is called (in the current kernel)
1342  * sometime after booting when the 'ifconfig' program is run.
1343  *
1344  * This routine should set everything up anew at each open, even
1345  * registers that "should" only need to be set once at boot, so that
1346  * there is non-reboot way to recover if something goes wrong.
1347  */
1348 static int enc28j60_net_open(struct net_device *dev)
1349 {
1350         struct enc28j60_net *priv = netdev_priv(dev);
1351
1352         if (netif_msg_drv(priv))
1353                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1354
1355         if (!is_valid_ether_addr(dev->dev_addr)) {
1356                 if (netif_msg_ifup(priv))
1357                         dev_err(&dev->dev, "invalid MAC address %pM\n",
1358                                 dev->dev_addr);
1359                 return -EADDRNOTAVAIL;
1360         }
1361         /* Reset the hardware here (and take it out of low power mode) */
1362         enc28j60_lowpower(priv, false);
1363         enc28j60_hw_disable(priv);
1364         if (!enc28j60_hw_init(priv)) {
1365                 if (netif_msg_ifup(priv))
1366                         dev_err(&dev->dev, "hw_reset() failed\n");
1367                 return -EINVAL;
1368         }
1369         /* Update the MAC address (in case user has changed it) */
1370         enc28j60_set_hw_macaddr(dev);
1371         /* Enable interrupts */
1372         enc28j60_hw_enable(priv);
1373         /* check link status */
1374         enc28j60_check_link_status(dev);
1375         /* We are now ready to accept transmit requests from
1376          * the queueing layer of the networking.
1377          */
1378         netif_start_queue(dev);
1379
1380         return 0;
1381 }
1382
1383 /* The inverse routine to net_open(). */
1384 static int enc28j60_net_close(struct net_device *dev)
1385 {
1386         struct enc28j60_net *priv = netdev_priv(dev);
1387
1388         if (netif_msg_drv(priv))
1389                 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1390
1391         enc28j60_hw_disable(priv);
1392         enc28j60_lowpower(priv, true);
1393         netif_stop_queue(dev);
1394
1395         return 0;
1396 }
1397
1398 /*
1399  * Set or clear the multicast filter for this adapter
1400  * num_addrs == -1      Promiscuous mode, receive all packets
1401  * num_addrs == 0       Normal mode, filter out multicast packets
1402  * num_addrs > 0        Multicast mode, receive normal and MC packets
1403  */
1404 static void enc28j60_set_multicast_list(struct net_device *dev)
1405 {
1406         struct enc28j60_net *priv = netdev_priv(dev);
1407         int oldfilter = priv->rxfilter;
1408
1409         if (dev->flags & IFF_PROMISC) {
1410                 if (netif_msg_link(priv))
1411                         dev_info(&dev->dev, "promiscuous mode\n");
1412                 priv->rxfilter = RXFILTER_PROMISC;
1413         } else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count) {
1414                 if (netif_msg_link(priv))
1415                         dev_info(&dev->dev, "%smulticast mode\n",
1416                                 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1417                 priv->rxfilter = RXFILTER_MULTI;
1418         } else {
1419                 if (netif_msg_link(priv))
1420                         dev_info(&dev->dev, "normal mode\n");
1421                 priv->rxfilter = RXFILTER_NORMAL;
1422         }
1423
1424         if (oldfilter != priv->rxfilter)
1425                 schedule_work(&priv->setrx_work);
1426 }
1427
1428 static void enc28j60_setrx_work_handler(struct work_struct *work)
1429 {
1430         struct enc28j60_net *priv =
1431                 container_of(work, struct enc28j60_net, setrx_work);
1432
1433         if (priv->rxfilter == RXFILTER_PROMISC) {
1434                 if (netif_msg_drv(priv))
1435                         printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1436                 locked_regb_write(priv, ERXFCON, 0x00);
1437         } else if (priv->rxfilter == RXFILTER_MULTI) {
1438                 if (netif_msg_drv(priv))
1439                         printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1440                 locked_regb_write(priv, ERXFCON,
1441                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1442                                         ERXFCON_BCEN | ERXFCON_MCEN);
1443         } else {
1444                 if (netif_msg_drv(priv))
1445                         printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1446                 locked_regb_write(priv, ERXFCON,
1447                                         ERXFCON_UCEN | ERXFCON_CRCEN |
1448                                         ERXFCON_BCEN);
1449         }
1450 }
1451
1452 static void enc28j60_restart_work_handler(struct work_struct *work)
1453 {
1454         struct enc28j60_net *priv =
1455                         container_of(work, struct enc28j60_net, restart_work);
1456         struct net_device *ndev = priv->netdev;
1457         int ret;
1458
1459         rtnl_lock();
1460         if (netif_running(ndev)) {
1461                 enc28j60_net_close(ndev);
1462                 ret = enc28j60_net_open(ndev);
1463                 if (unlikely(ret)) {
1464                         dev_info(&ndev->dev, " could not restart %d\n", ret);
1465                         dev_close(ndev);
1466                 }
1467         }
1468         rtnl_unlock();
1469 }
1470
1471 /* ......................... ETHTOOL SUPPORT ........................... */
1472
1473 static void
1474 enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1475 {
1476         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1477         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1478         strlcpy(info->bus_info,
1479                 dev_name(dev->dev.parent), sizeof(info->bus_info));
1480 }
1481
1482 static int
1483 enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1484 {
1485         struct enc28j60_net *priv = netdev_priv(dev);
1486
1487         cmd->transceiver = XCVR_INTERNAL;
1488         cmd->supported  = SUPPORTED_10baseT_Half
1489                         | SUPPORTED_10baseT_Full
1490                         | SUPPORTED_TP;
1491         cmd->speed      = SPEED_10;
1492         cmd->duplex     = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1493         cmd->port       = PORT_TP;
1494         cmd->autoneg    = AUTONEG_DISABLE;
1495
1496         return 0;
1497 }
1498
1499 static int
1500 enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1501 {
1502         return enc28j60_setlink(dev, cmd->autoneg, cmd->speed, cmd->duplex);
1503 }
1504
1505 static u32 enc28j60_get_msglevel(struct net_device *dev)
1506 {
1507         struct enc28j60_net *priv = netdev_priv(dev);
1508         return priv->msg_enable;
1509 }
1510
1511 static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1512 {
1513         struct enc28j60_net *priv = netdev_priv(dev);
1514         priv->msg_enable = val;
1515 }
1516
1517 static const struct ethtool_ops enc28j60_ethtool_ops = {
1518         .get_settings   = enc28j60_get_settings,
1519         .set_settings   = enc28j60_set_settings,
1520         .get_drvinfo    = enc28j60_get_drvinfo,
1521         .get_msglevel   = enc28j60_get_msglevel,
1522         .set_msglevel   = enc28j60_set_msglevel,
1523 };
1524
1525 static int enc28j60_chipset_init(struct net_device *dev)
1526 {
1527         struct enc28j60_net *priv = netdev_priv(dev);
1528
1529         return enc28j60_hw_init(priv);
1530 }
1531
1532 static int __devinit enc28j60_probe(struct spi_device *spi)
1533 {
1534         struct net_device *dev;
1535         struct enc28j60_net *priv;
1536         int ret = 0;
1537
1538         if (netif_msg_drv(&debug))
1539                 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1540                         DRV_VERSION);
1541
1542         dev = alloc_etherdev(sizeof(struct enc28j60_net));
1543         if (!dev) {
1544                 if (netif_msg_drv(&debug))
1545                         dev_err(&spi->dev, DRV_NAME
1546                                 ": unable to alloc new ethernet\n");
1547                 ret = -ENOMEM;
1548                 goto error_alloc;
1549         }
1550         priv = netdev_priv(dev);
1551
1552         priv->netdev = dev;     /* priv to netdev reference */
1553         priv->spi = spi;        /* priv to spi reference */
1554         priv->msg_enable = netif_msg_init(debug.msg_enable,
1555                                                 ENC28J60_MSG_DEFAULT);
1556         mutex_init(&priv->lock);
1557         INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1558         INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1559         INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1560         INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1561         dev_set_drvdata(&spi->dev, priv);       /* spi to priv reference */
1562         SET_NETDEV_DEV(dev, &spi->dev);
1563
1564         if (!enc28j60_chipset_init(dev)) {
1565                 if (netif_msg_probe(priv))
1566                         dev_info(&spi->dev, DRV_NAME " chip not found\n");
1567                 ret = -EIO;
1568                 goto error_irq;
1569         }
1570         random_ether_addr(dev->dev_addr);
1571         enc28j60_set_hw_macaddr(dev);
1572
1573         /* Board setup must set the relevant edge trigger type;
1574          * level triggers won't currently work.
1575          */
1576         ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1577         if (ret < 0) {
1578                 if (netif_msg_probe(priv))
1579                         dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1580                                 "(ret = %d)\n", spi->irq, ret);
1581                 goto error_irq;
1582         }
1583
1584         dev->if_port = IF_PORT_10BASET;
1585         dev->irq = spi->irq;
1586         dev->open = enc28j60_net_open;
1587         dev->stop = enc28j60_net_close;
1588         dev->hard_start_xmit = enc28j60_send_packet;
1589         dev->set_multicast_list = &enc28j60_set_multicast_list;
1590         dev->set_mac_address = enc28j60_set_mac_address;
1591         dev->tx_timeout = &enc28j60_tx_timeout;
1592         dev->watchdog_timeo = TX_TIMEOUT;
1593         SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
1594
1595         enc28j60_lowpower(priv, true);
1596
1597         ret = register_netdev(dev);
1598         if (ret) {
1599                 if (netif_msg_probe(priv))
1600                         dev_err(&spi->dev, "register netdev " DRV_NAME
1601                                 " failed (ret = %d)\n", ret);
1602                 goto error_register;
1603         }
1604         dev_info(&dev->dev, DRV_NAME " driver registered\n");
1605
1606         return 0;
1607
1608 error_register:
1609         free_irq(spi->irq, priv);
1610 error_irq:
1611         free_netdev(dev);
1612 error_alloc:
1613         return ret;
1614 }
1615
1616 static int __devexit enc28j60_remove(struct spi_device *spi)
1617 {
1618         struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
1619
1620         if (netif_msg_drv(priv))
1621                 printk(KERN_DEBUG DRV_NAME ": remove\n");
1622
1623         unregister_netdev(priv->netdev);
1624         free_irq(spi->irq, priv);
1625         free_netdev(priv->netdev);
1626
1627         return 0;
1628 }
1629
1630 static struct spi_driver enc28j60_driver = {
1631         .driver = {
1632                    .name = DRV_NAME,
1633                    .owner = THIS_MODULE,
1634          },
1635         .probe = enc28j60_probe,
1636         .remove = __devexit_p(enc28j60_remove),
1637 };
1638
1639 static int __init enc28j60_init(void)
1640 {
1641         msec20_to_jiffies = msecs_to_jiffies(20);
1642
1643         return spi_register_driver(&enc28j60_driver);
1644 }
1645
1646 module_init(enc28j60_init);
1647
1648 static void __exit enc28j60_exit(void)
1649 {
1650         spi_unregister_driver(&enc28j60_driver);
1651 }
1652
1653 module_exit(enc28j60_exit);
1654
1655 MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1656 MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1657 MODULE_LICENSE("GPL");
1658 module_param_named(debug, debug.msg_enable, int, 0);
1659 MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");