git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-pxa/spitz.c

   1 /*
   2  * Support for Sharp SL-Cxx00 Series of PDAs
   3  * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
   4  *
   5  * Copyright (c) 2005 Richard Purdie
   6  *
   7  * Based on Sharp's 2.4 kernel patches/lubbock.c
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/major.h>
  20 #include <linux/fs.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/gpio.h>
  23 #include <linux/leds.h>
  24 #include <linux/mmc/host.h>
  25 #include <linux/pm.h>
  26 #include <linux/backlight.h>
  27 #include <linux/io.h>
  28 #include <linux/i2c.h>
  29 #include <linux/i2c/pca953x.h>
  30 #include <linux/spi/spi.h>
  31 #include <linux/spi/ads7846.h>
  32 #include <linux/spi/corgi_lcd.h>
  33
  34 #include <asm/setup.h>
  35 #include <asm/memory.h>
  36 #include <asm/mach-types.h>
  37 #include <mach/hardware.h>
  38 #include <asm/irq.h>
  39 #include <asm/system.h>
  40
  41 #include <asm/mach/arch.h>
  42 #include <asm/mach/map.h>
  43 #include <asm/mach/irq.h>
  44
  45 #include <mach/pxa-regs.h>
  46 #include <mach/pxa2xx-regs.h>
  47 #include <mach/mfp-pxa27x.h>
  48 #include <mach/pxa27x-udc.h>
  49 #include <mach/reset.h>
  50 #include <mach/i2c.h>
  51 #include <mach/irda.h>
  52 #include <mach/mmc.h>
  53 #include <mach/ohci.h>
  54 #include <mach/udc.h>
  55 #include <mach/pxafb.h>
  56 #include <mach/pxa2xx_spi.h>
  57 #include <mach/spitz.h>
  58 #include <mach/sharpsl.h>
  59
  60 #include <asm/mach/sharpsl_param.h>
  61 #include <asm/hardware/scoop.h>
  62
  63 #include "generic.h"
  64 #include "devices.h"
  65 #include "sharpsl.h"
  66
  67 static unsigned long spitz_pin_config[] __initdata = {
  68         /* Chip Selects */
  69         GPIO78_nCS_2,   /* SCOOP #2 */
  70         GPIO80_nCS_4,   /* SCOOP #1 */
  71
  72         /* LCD - 16bpp Active TFT */
  73         GPIO58_LCD_LDD_0,
  74         GPIO59_LCD_LDD_1,
  75         GPIO60_LCD_LDD_2,
  76         GPIO61_LCD_LDD_3,
  77         GPIO62_LCD_LDD_4,
  78         GPIO63_LCD_LDD_5,
  79         GPIO64_LCD_LDD_6,
  80         GPIO65_LCD_LDD_7,
  81         GPIO66_LCD_LDD_8,
  82         GPIO67_LCD_LDD_9,
  83         GPIO68_LCD_LDD_10,
  84         GPIO69_LCD_LDD_11,
  85         GPIO70_LCD_LDD_12,
  86         GPIO71_LCD_LDD_13,
  87         GPIO72_LCD_LDD_14,
  88         GPIO73_LCD_LDD_15,
  89         GPIO74_LCD_FCLK,
  90         GPIO75_LCD_LCLK,
  91         GPIO76_LCD_PCLK,
  92
  93         /* PC Card */
  94         GPIO48_nPOE,
  95         GPIO49_nPWE,
  96         GPIO50_nPIOR,
  97         GPIO51_nPIOW,
  98         GPIO85_nPCE_1,
  99         GPIO54_nPCE_2,
 100         GPIO79_PSKTSEL,
 101         GPIO55_nPREG,
 102         GPIO56_nPWAIT,
 103         GPIO57_nIOIS16,
 104
 105         /* MMC */
 106         GPIO32_MMC_CLK,
 107         GPIO112_MMC_CMD,
 108         GPIO92_MMC_DAT_0,
 109         GPIO109_MMC_DAT_1,
 110         GPIO110_MMC_DAT_2,
 111         GPIO111_MMC_DAT_3,
 112
 113         /* GPIOs */
 114         GPIO9_GPIO,     /* SPITZ_GPIO_nSD_DETECT */
 115         GPIO81_GPIO,    /* SPITZ_GPIO_nSD_WP */
 116         GPIO41_GPIO,    /* SPITZ_GPIO_USB_CONNECT */
 117         GPIO37_GPIO,    /* SPITZ_GPIO_USB_HOST */
 118         GPIO35_GPIO,    /* SPITZ_GPIO_USB_DEVICE */
 119         GPIO22_GPIO,    /* SPITZ_GPIO_HSYNC */
 120         GPIO94_GPIO,    /* SPITZ_GPIO_CF_CD */
 121         GPIO105_GPIO,   /* SPITZ_GPIO_CF_IRQ */
 122         GPIO106_GPIO,   /* SPITZ_GPIO_CF2_IRQ */
 123
 124         GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 125 };
 126
 127 /*
 128  * Spitz SCOOP Device #1
 129  */
 130 static struct resource spitz_scoop_resources[] = {
 131         [0] = {
 132                 .start          = 0x10800000,
 133                 .end            = 0x10800fff,
 134                 .flags          = IORESOURCE_MEM,
 135         },
 136 };
 137
 138 static struct scoop_config spitz_scoop_setup = {
 139         .io_dir         = SPITZ_SCP_IO_DIR,
 140         .io_out         = SPITZ_SCP_IO_OUT,
 141         .suspend_clr    = SPITZ_SCP_SUS_CLR,
 142         .suspend_set    = SPITZ_SCP_SUS_SET,
 143         .gpio_base      = SPITZ_SCP_GPIO_BASE,
 144 };
 145
 146 struct platform_device spitzscoop_device = {
 147         .name           = "sharp-scoop",
 148         .id             = 0,
 149         .dev            = {
 150                 .platform_data  = &spitz_scoop_setup,
 151         },
 152         .num_resources  = ARRAY_SIZE(spitz_scoop_resources),
 153         .resource       = spitz_scoop_resources,
 154 };
 155
 156 /*
 157  * Spitz SCOOP Device #2
 158  */
 159 static struct resource spitz_scoop2_resources[] = {
 160         [0] = {
 161                 .start          = 0x08800040,
 162                 .end            = 0x08800fff,
 163                 .flags          = IORESOURCE_MEM,
 164         },
 165 };
 166
 167 static struct scoop_config spitz_scoop2_setup = {
 168         .io_dir         = SPITZ_SCP2_IO_DIR,
 169         .io_out         = SPITZ_SCP2_IO_OUT,
 170         .suspend_clr    = SPITZ_SCP2_SUS_CLR,
 171         .suspend_set    = SPITZ_SCP2_SUS_SET,
 172         .gpio_base      = SPITZ_SCP2_GPIO_BASE,
 173 };
 174
 175 struct platform_device spitzscoop2_device = {
 176         .name           = "sharp-scoop",
 177         .id             = 1,
 178         .dev            = {
 179                 .platform_data  = &spitz_scoop2_setup,
 180         },
 181         .num_resources  = ARRAY_SIZE(spitz_scoop2_resources),
 182         .resource       = spitz_scoop2_resources,
 183 };
 184
 185 #define SPITZ_PWR_SD 0x01
 186 #define SPITZ_PWR_CF 0x02
 187
 188 /* Power control is shared with between one of the CF slots and SD */
 189 static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 190 {
 191         unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
 192
 193         if (new_cpr & 0x0007) {
 194                 gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
 195                 if (!(cpr & 0x0002) && !(cpr & 0x0004))
 196                         mdelay(5);
 197                 if (device == SPITZ_PWR_CF)
 198                         cpr |= 0x0002;
 199                 if (device == SPITZ_PWR_SD)
 200                         cpr |= 0x0004;
 201                 write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 202         } else {
 203                 if (device == SPITZ_PWR_CF)
 204                         cpr &= ~0x0002;
 205                 if (device == SPITZ_PWR_SD)
 206                         cpr &= ~0x0004;
 207                 if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
 208                         write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
 209                         mdelay(1);
 210                         gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 211                 } else {
 212                         write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 213                 }
 214         }
 215 }
 216
 217 static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
 218 {
 219         /* Only need to override behaviour for slot 0 */
 220         if (nr == 0)
 221                 spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
 222         else
 223                 write_scoop_reg(scoop, SCOOP_CPR, cpr);
 224 }
 225
 226 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 227 {
 228         .dev        = &spitzscoop_device.dev,
 229         .irq        = SPITZ_IRQ_GPIO_CF_IRQ,
 230         .cd_irq     = SPITZ_IRQ_GPIO_CF_CD,
 231         .cd_irq_str = "PCMCIA0 CD",
 232 },{
 233         .dev        = &spitzscoop2_device.dev,
 234         .irq        = SPITZ_IRQ_GPIO_CF2_IRQ,
 235         .cd_irq     = -1,
 236 },
 237 };
 238
 239 static struct scoop_pcmcia_config spitz_pcmcia_config = {
 240         .devs         = &spitz_pcmcia_scoop[0],
 241         .num_devs     = 2,
 242         .power_ctrl   = spitz_pcmcia_pwr,
 243 };
 244
 245 EXPORT_SYMBOL(spitzscoop_device);
 246 EXPORT_SYMBOL(spitzscoop2_device);
 247
 248 /*
 249  * Spitz Keyboard Device
 250  */
 251 static struct platform_device spitzkbd_device = {
 252         .name           = "spitz-keyboard",
 253         .id             = -1,
 254 };
 255
 256
 257 /*
 258  * Spitz LEDs
 259  */
 260 static struct gpio_led spitz_gpio_leds[] = {
 261         {
 262                 .name                   = "spitz:amber:charge",
 263                 .default_trigger        = "sharpsl-charge",
 264                 .gpio                   = SPITZ_GPIO_LED_ORANGE,
 265         },
 266         {
 267                 .name                   = "spitz:green:hddactivity",
 268                 .default_trigger        = "ide-disk",
 269                 .gpio                   = SPITZ_GPIO_LED_GREEN,
 270         },
 271 };
 272
 273 static struct gpio_led_platform_data spitz_gpio_leds_info = {
 274         .leds           = spitz_gpio_leds,
 275         .num_leds       = ARRAY_SIZE(spitz_gpio_leds),
 276 };
 277
 278 static struct platform_device spitzled_device = {
 279         .name           = "leds-gpio",
 280         .id             = -1,
 281         .dev            = {
 282                 .platform_data = &spitz_gpio_leds_info,
 283         },
 284 };
 285
 286 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
 287 static struct pxa2xx_spi_master spitz_spi_info = {
 288         .num_chipselect = 3,
 289 };
 290
 291 static struct ads7846_platform_data spitz_ads7846_info = {
 292         .model                  = 7846,
 293         .vref_delay_usecs       = 100,
 294         .x_plate_ohms           = 419,
 295         .y_plate_ohms           = 486,
 296         .gpio_pendown           = SPITZ_GPIO_TP_INT,
 297 };
 298
 299 static void spitz_ads7846_cs(u32 command)
 300 {
 301         gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
 302 }
 303
 304 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
 305         .cs_control             = spitz_ads7846_cs,
 306 };
 307
 308 static void spitz_bl_kick_battery(void)
 309 {
 310         void (*kick_batt)(void);
 311
 312         kick_batt = symbol_get(sharpsl_battery_kick);
 313         if (kick_batt) {
 314                 kick_batt();
 315                 symbol_put(sharpsl_battery_kick);
 316         }
 317 }
 318
 319 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 320         .init_mode              = CORGI_LCD_MODE_VGA,
 321         .max_intensity          = 0x2f,
 322         .default_intensity      = 0x1f,
 323         .limit_mask             = 0x0b,
 324         .gpio_backlight_cont    = SPITZ_GPIO_BACKLIGHT_CONT,
 325         .gpio_backlight_on      = SPITZ_GPIO_BACKLIGHT_ON,
 326         .kick_battery           = spitz_bl_kick_battery,
 327 };
 328
 329 static void spitz_lcdcon_cs(u32 command)
 330 {
 331         gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
 332 }
 333
 334 static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
 335         .cs_control     = spitz_lcdcon_cs,
 336 };
 337
 338 static void spitz_max1111_cs(u32 command)
 339 {
 340         gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
 341 }
 342
 343 static struct pxa2xx_spi_chip spitz_max1111_chip = {
 344         .cs_control     = spitz_max1111_cs,
 345 };
 346
 347 static struct spi_board_info spitz_spi_devices[] = {
 348         {
 349                 .modalias       = "ads7846",
 350                 .max_speed_hz   = 1200000,
 351                 .bus_num        = 2,
 352                 .chip_select    = 0,
 353                 .platform_data  = &spitz_ads7846_info,
 354                 .controller_data= &spitz_ads7846_chip,
 355                 .irq            = gpio_to_irq(SPITZ_GPIO_TP_INT),
 356         }, {
 357                 .modalias       = "corgi-lcd",
 358                 .max_speed_hz   = 50000,
 359                 .bus_num        = 2,
 360                 .chip_select    = 1,
 361                 .platform_data  = &spitz_lcdcon_info,
 362                 .controller_data= &spitz_lcdcon_chip,
 363         }, {
 364                 .modalias       = "max1111",
 365                 .max_speed_hz   = 450000,
 366                 .bus_num        = 2,
 367                 .chip_select    = 2,
 368                 .controller_data= &spitz_max1111_chip,
 369         },
 370 };
 371
 372 static void __init spitz_init_spi(void)
 373 {
 374         int err;
 375
 376         err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
 377         if (err)
 378                 return;
 379
 380         err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
 381         if (err)
 382                 goto err_free_1;
 383
 384         err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
 385         if (err)
 386                 goto err_free_2;
 387
 388         if (machine_is_akita()) {
 389                 spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 390                 spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
 391         }
 392
 393         pxa2xx_set_spi_info(2, &spitz_spi_info);
 394         spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 395         return;
 396
 397 err_free_2:
 398         gpio_free(SPITZ_GPIO_LCDCON_CS);
 399 err_free_1:
 400         gpio_free(SPITZ_GPIO_ADS7846_CS);
 401 }
 402 #else
 403 static inline void spitz_init_spi(void) {}
 404 #endif
 405
 406 /*
 407  * MMC/SD Device
 408  *
 409  * The card detect interrupt isn't debounced so we delay it by 250ms
 410  * to give the card a chance to fully insert/eject.
 411  */
 412
 413 static struct pxamci_platform_data spitz_mci_platform_data;
 414
 415 static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
 416 {
 417         int err;
 418
 419         err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
 420         if (err)
 421                 goto err_out;
 422
 423         err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
 424         if (err)
 425                 goto err_free_1;
 426
 427         gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
 428         gpio_direction_input(SPITZ_GPIO_nSD_WP);
 429
 430         spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 431
 432         err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
 433                           IRQF_DISABLED | IRQF_TRIGGER_RISING |
 434                           IRQF_TRIGGER_FALLING,
 435                           "MMC card detect", data);
 436         if (err) {
 437                 pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
 438                                 __func__);
 439                 goto err_free_2;
 440         }
 441         return 0;
 442
 443 err_free_2:
 444         gpio_free(SPITZ_GPIO_nSD_WP);
 445 err_free_1:
 446         gpio_free(SPITZ_GPIO_nSD_DETECT);
 447 err_out:
 448         return err;
 449 }
 450
 451 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 452 {
 453         struct pxamci_platform_data* p_d = dev->platform_data;
 454
 455         if (( 1 << vdd) & p_d->ocr_mask)
 456                 spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
 457         else
 458                 spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 459 }
 460
 461 static int spitz_mci_get_ro(struct device *dev)
 462 {
 463         return gpio_get_value(SPITZ_GPIO_nSD_WP);
 464 }
 465
 466 static void spitz_mci_exit(struct device *dev, void *data)
 467 {
 468         free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
 469         gpio_free(SPITZ_GPIO_nSD_WP);
 470         gpio_free(SPITZ_GPIO_nSD_DETECT);
 471 }
 472
 473 static struct pxamci_platform_data spitz_mci_platform_data = {
 474         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 475         .init           = spitz_mci_init,
 476         .get_ro         = spitz_mci_get_ro,
 477         .setpower       = spitz_mci_setpower,
 478         .exit           = spitz_mci_exit,
 479 };
 480
 481
 482 /*
 483  * USB Host (OHCI)
 484  */
 485 static int spitz_ohci_init(struct device *dev)
 486 {
 487         int err;
 488
 489         err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
 490         if (err)
 491                 return err;
 492
 493         /* Only Port 2 is connected
 494          * Setup USB Port 2 Output Control Register
 495          */
 496         UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 497
 498         return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 499 }
 500
 501 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 502         .port_mode      = PMM_NPS_MODE,
 503         .init           = spitz_ohci_init,
 504         .flags          = ENABLE_PORT_ALL | NO_OC_PROTECTION,
 505         .power_budget   = 150,
 506 };
 507
 508
 509 /*
 510  * Irda
 511  */
 512 static int spitz_irda_startup(struct device *dev)
 513 {
 514         int rc;
 515
 516         rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
 517         if (rc)
 518                 goto err;
 519
 520         rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
 521         if (rc)
 522                 goto err_dir;
 523
 524         return 0;
 525
 526 err_dir:
 527         gpio_free(SPITZ_GPIO_IR_ON);
 528 err:
 529         return rc;
 530 }
 531
 532 static void spitz_irda_shutdown(struct device *dev)
 533 {
 534         gpio_free(SPITZ_GPIO_IR_ON);
 535 }
 536
 537 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 538 {
 539         gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
 540         pxa2xx_transceiver_mode(dev, mode);
 541 }
 542
 543 #ifdef CONFIG_MACH_AKITA
 544 static void akita_irda_transceiver_mode(struct device *dev, int mode)
 545 {
 546         gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
 547         pxa2xx_transceiver_mode(dev, mode);
 548 }
 549 #endif
 550
 551 static struct pxaficp_platform_data spitz_ficp_platform_data = {
 552         .transceiver_cap        = IR_SIRMODE | IR_OFF,
 553         .transceiver_mode       = spitz_irda_transceiver_mode,
 554         .startup                = spitz_irda_startup,
 555         .shutdown               = spitz_irda_shutdown,
 556 };
 557
 558
 559 /*
 560  * Spitz PXA Framebuffer
 561  */
 562
 563 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 564 {
 565         .pixclock       = 19231,
 566         .xres           = 480,
 567         .yres           = 640,
 568         .bpp            = 16,
 569         .hsync_len      = 40,
 570         .left_margin    = 46,
 571         .right_margin   = 125,
 572         .vsync_len      = 3,
 573         .upper_margin   = 1,
 574         .lower_margin   = 0,
 575         .sync           = 0,
 576 },{
 577         .pixclock       = 134617,
 578         .xres           = 240,
 579         .yres           = 320,
 580         .bpp            = 16,
 581         .hsync_len      = 20,
 582         .left_margin    = 20,
 583         .right_margin   = 46,
 584         .vsync_len      = 2,
 585         .upper_margin   = 1,
 586         .lower_margin   = 0,
 587         .sync           = 0,
 588 },
 589 };
 590
 591 static struct pxafb_mach_info spitz_pxafb_info = {
 592         .modes          = &spitz_pxafb_modes[0],
 593         .num_modes      = 2,
 594         .fixed_modes    = 1,
 595         .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 596 };
 597
 598
 599 static struct platform_device *devices[] __initdata = {
 600         &spitzscoop_device,
 601         &spitzkbd_device,
 602         &spitzled_device,
 603 };
 604
 605 static void spitz_poweroff(void)
 606 {
 607         arm_machine_restart('g');
 608 }
 609
 610 static void spitz_restart(char mode)
 611 {
 612         /* Bootloader magic for a reboot */
 613         if((MSC0 & 0xffff0000) == 0x7ff00000)
 614                 MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
 615
 616         spitz_poweroff();
 617 }
 618
 619 static void __init common_init(void)
 620 {
 621         init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
 622         pm_power_off = spitz_poweroff;
 623         arm_pm_restart = spitz_restart;
 624
 625         PMCR = 0x00;
 626
 627         /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 628         PCFR |= PCFR_OPDE;
 629
 630         pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 631
 632         spitz_init_spi();
 633
 634         platform_add_devices(devices, ARRAY_SIZE(devices));
 635         pxa_set_mci_info(&spitz_mci_platform_data);
 636         pxa_set_ohci_info(&spitz_ohci_platform_data);
 637         pxa_set_ficp_info(&spitz_ficp_platform_data);
 638         set_pxa_fb_info(&spitz_pxafb_info);
 639         pxa_set_i2c_info(NULL);
 640 }
 641
 642 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 643 static void __init spitz_init(void)
 644 {
 645         platform_scoop_config = &spitz_pcmcia_config;
 646
 647         common_init();
 648
 649         platform_device_register(&spitzscoop2_device);
 650 }
 651 #endif
 652
 653 #ifdef CONFIG_MACH_AKITA
 654 /*
 655  * Akita IO Expander
 656  */
 657 static struct pca953x_platform_data akita_ioexp = {
 658         .gpio_base              = AKITA_IOEXP_GPIO_BASE,
 659 };
 660
 661 static struct i2c_board_info akita_i2c_board_info[] = {
 662         {
 663                 .type           = "max7310",
 664                 .addr           = 0x18,
 665                 .platform_data  = &akita_ioexp,
 666         },
 667 };
 668
 669 static void __init akita_init(void)
 670 {
 671         spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
 672
 673         /* We just pretend the second element of the array doesn't exist */
 674         spitz_pcmcia_config.num_devs = 1;
 675         platform_scoop_config = &spitz_pcmcia_config;
 676
 677         pxa_set_i2c_info(NULL);
 678         i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 679
 680         common_init();
 681 }
 682 #endif
 683
 684 static void __init fixup_spitz(struct machine_desc *desc,
 685                 struct tag *tags, char **cmdline, struct meminfo *mi)
 686 {
 687         sharpsl_save_param();
 688         mi->nr_banks = 1;
 689         mi->bank[0].start = 0xa0000000;
 690         mi->bank[0].node = 0;
 691         mi->bank[0].size = (64*1024*1024);
 692 }
 693
 694 #ifdef CONFIG_MACH_SPITZ
 695 MACHINE_START(SPITZ, "SHARP Spitz")
 696         .phys_io        = 0x40000000,
 697         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 698         .fixup          = fixup_spitz,
 699         .map_io         = pxa_map_io,
 700         .init_irq       = pxa27x_init_irq,
 701         .init_machine   = spitz_init,
 702         .timer          = &pxa_timer,
 703 MACHINE_END
 704 #endif
 705
 706 #ifdef CONFIG_MACH_BORZOI
 707 MACHINE_START(BORZOI, "SHARP Borzoi")
 708         .phys_io        = 0x40000000,
 709         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 710         .fixup          = fixup_spitz,
 711         .map_io         = pxa_map_io,
 712         .init_irq       = pxa27x_init_irq,
 713         .init_machine   = spitz_init,
 714         .timer          = &pxa_timer,
 715 MACHINE_END
 716 #endif
 717
 718 #ifdef CONFIG_MACH_AKITA
 719 MACHINE_START(AKITA, "SHARP Akita")
 720         .phys_io        = 0x40000000,
 721         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 722         .fixup          = fixup_spitz,
 723         .map_io         = pxa_map_io,
 724         .init_irq       = pxa27x_init_irq,
 725         .init_machine   = akita_init,
 726         .timer          = &pxa_timer,
 727 MACHINE_END
 728 #endif