mlx4_core: Get ethernet MTU and default address from firmware
[linux-2.6] / drivers / net / ixgbe / ixgbe_phy.c
1 /*******************************************************************************
2
3   Intel 10 Gigabit PCI Express Linux driver
4   Copyright(c) 1999 - 2007 Intel Corporation.
5
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21
22   Contact Information:
23   Linux NICS <linux.nics@intel.com>
24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26
27 *******************************************************************************/
28
29 #include <linux/pci.h>
30 #include <linux/delay.h>
31 #include <linux/sched.h>
32
33 #include "ixgbe_common.h"
34 #include "ixgbe_phy.h"
35
36 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
37 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
38 static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
39 static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
40                                u32 device_type, u16 phy_data);
41
42 /**
43  *  ixgbe_identify_phy - Get physical layer module
44  *  @hw: pointer to hardware structure
45  *
46  *  Determines the physical layer module found on the current adapter.
47  **/
48 s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
49 {
50         s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
51         u32 phy_addr;
52
53         for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
54                 if (ixgbe_validate_phy_addr(hw, phy_addr)) {
55                         hw->phy.addr = phy_addr;
56                         ixgbe_get_phy_id(hw);
57                         hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
58                         status = 0;
59                         break;
60                 }
61         }
62         return status;
63 }
64
65 /**
66  *  ixgbe_validate_phy_addr - Determines phy address is valid
67  *  @hw: pointer to hardware structure
68  *
69  **/
70 static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
71 {
72         u16 phy_id = 0;
73         bool valid = false;
74
75         hw->phy.addr = phy_addr;
76         ixgbe_read_phy_reg(hw,
77                            IXGBE_MDIO_PHY_ID_HIGH,
78                            IXGBE_MDIO_PMA_PMD_DEV_TYPE,
79                            &phy_id);
80
81         if (phy_id != 0xFFFF && phy_id != 0x0)
82                 valid = true;
83
84         return valid;
85 }
86
87 /**
88  *  ixgbe_get_phy_id - Get the phy type
89  *  @hw: pointer to hardware structure
90  *
91  **/
92 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
93 {
94         u32 status;
95         u16 phy_id_high = 0;
96         u16 phy_id_low = 0;
97
98         status = ixgbe_read_phy_reg(hw,
99                                    IXGBE_MDIO_PHY_ID_HIGH,
100                                    IXGBE_MDIO_PMA_PMD_DEV_TYPE,
101                                    &phy_id_high);
102
103         if (status == 0) {
104                 hw->phy.id = (u32)(phy_id_high << 16);
105                 status = ixgbe_read_phy_reg(hw,
106                                            IXGBE_MDIO_PHY_ID_LOW,
107                                            IXGBE_MDIO_PMA_PMD_DEV_TYPE,
108                                            &phy_id_low);
109                 hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
110                 hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
111         }
112
113         return status;
114 }
115
116 /**
117  *  ixgbe_get_phy_type_from_id - Get the phy type
118  *  @hw: pointer to hardware structure
119  *
120  **/
121 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
122 {
123         enum ixgbe_phy_type phy_type;
124
125         switch (phy_id) {
126         case TN1010_PHY_ID:
127                 phy_type = ixgbe_phy_tn;
128                 break;
129         case QT2022_PHY_ID:
130                 phy_type = ixgbe_phy_qt;
131                 break;
132         default:
133                 phy_type = ixgbe_phy_unknown;
134                 break;
135         }
136
137         return phy_type;
138 }
139
140 /**
141  *  ixgbe_reset_phy - Performs a PHY reset
142  *  @hw: pointer to hardware structure
143  **/
144 s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
145 {
146         /*
147          * Perform soft PHY reset to the PHY_XS.
148          * This will cause a soft reset to the PHY
149          */
150         return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
151                                    IXGBE_MDIO_PHY_XS_DEV_TYPE,
152                                    IXGBE_MDIO_PHY_XS_RESET);
153 }
154
155 /**
156  *  ixgbe_read_phy_reg - Reads a value from a specified PHY register
157  *  @hw: pointer to hardware structure
158  *  @reg_addr: 32 bit address of PHY register to read
159  *  @phy_data: Pointer to read data from PHY register
160  **/
161 s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
162                        u32 device_type, u16 *phy_data)
163 {
164         u32 command;
165         u32 i;
166         u32 timeout = 10;
167         u32 data;
168         s32 status = 0;
169         u16 gssr;
170
171         if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
172                 gssr = IXGBE_GSSR_PHY1_SM;
173         else
174                 gssr = IXGBE_GSSR_PHY0_SM;
175
176         if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
177                 status = IXGBE_ERR_SWFW_SYNC;
178
179         if (status == 0) {
180                 /* Setup and write the address cycle command */
181                 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
182                            (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
183                            (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
184                            (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
185
186                 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
187
188                 /*
189                  * Check every 10 usec to see if the address cycle completed.
190                  * The MDI Command bit will clear when the operation is
191                  * complete
192                  */
193                 for (i = 0; i < timeout; i++) {
194                         udelay(10);
195
196                         command = IXGBE_READ_REG(hw, IXGBE_MSCA);
197
198                         if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
199                                 break;
200                 }
201
202                 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
203                         hw_dbg(hw, "PHY address command did not complete.\n");
204                         status = IXGBE_ERR_PHY;
205                 }
206
207                 if (status == 0) {
208                         /*
209                          * Address cycle complete, setup and write the read
210                          * command
211                          */
212                         command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
213                                    (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
214                                    (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
215                                    (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
216
217                         IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
218
219                         /*
220                          * Check every 10 usec to see if the address cycle
221                          * completed. The MDI Command bit will clear when the
222                          * operation is complete
223                          */
224                         for (i = 0; i < timeout; i++) {
225                                 udelay(10);
226
227                                 command = IXGBE_READ_REG(hw, IXGBE_MSCA);
228
229                                 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
230                                         break;
231                         }
232
233                         if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
234                                 hw_dbg(hw,
235                                        "PHY read command didn't complete\n");
236                                 status = IXGBE_ERR_PHY;
237                         } else {
238                                 /*
239                                  * Read operation is complete.  Get the data
240                                  * from MSRWD
241                                  */
242                                 data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
243                                 data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
244                                 *phy_data = (u16)(data);
245                         }
246                 }
247
248                 ixgbe_release_swfw_sync(hw, gssr);
249         }
250         return status;
251 }
252
253 /**
254  *  ixgbe_write_phy_reg - Writes a value to specified PHY register
255  *  @hw: pointer to hardware structure
256  *  @reg_addr: 32 bit PHY register to write
257  *  @device_type: 5 bit device type
258  *  @phy_data: Data to write to the PHY register
259  **/
260 static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
261                                u32 device_type, u16 phy_data)
262 {
263         u32 command;
264         u32 i;
265         u32 timeout = 10;
266         s32 status = 0;
267         u16 gssr;
268
269         if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
270                 gssr = IXGBE_GSSR_PHY1_SM;
271         else
272                 gssr = IXGBE_GSSR_PHY0_SM;
273
274         if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
275                 status = IXGBE_ERR_SWFW_SYNC;
276
277         if (status == 0) {
278                 /* Put the data in the MDI single read and write data register*/
279                 IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
280
281                 /* Setup and write the address cycle command */
282                 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
283                            (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
284                            (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
285                            (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
286
287                 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
288
289                 /*
290                  * Check every 10 usec to see if the address cycle completed.
291                  * The MDI Command bit will clear when the operation is
292                  * complete
293                  */
294                 for (i = 0; i < timeout; i++) {
295                         udelay(10);
296
297                         command = IXGBE_READ_REG(hw, IXGBE_MSCA);
298
299                         if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
300                                 hw_dbg(hw, "PHY address cmd didn't complete\n");
301                                 break;
302                         }
303                 }
304
305                 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
306                         status = IXGBE_ERR_PHY;
307
308                 if (status == 0) {
309                         /*
310                          * Address cycle complete, setup and write the write
311                          * command
312                          */
313                         command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
314                                    (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
315                                    (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
316                                    (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
317
318                         IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
319
320                         /*
321                          * Check every 10 usec to see if the address cycle
322                          * completed. The MDI Command bit will clear when the
323                          * operation is complete
324                          */
325                         for (i = 0; i < timeout; i++) {
326                                 udelay(10);
327
328                                 command = IXGBE_READ_REG(hw, IXGBE_MSCA);
329
330                                 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
331                                         hw_dbg(hw, "PHY write command did not "
332                                                   "complete.\n");
333                                         break;
334                                 }
335                         }
336
337                         if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
338                                 status = IXGBE_ERR_PHY;
339                 }
340
341                 ixgbe_release_swfw_sync(hw, gssr);
342         }
343
344         return status;
345 }
346
347 /**
348  *  ixgbe_setup_tnx_phy_link - Set and restart autoneg
349  *  @hw: pointer to hardware structure
350  *
351  *  Restart autonegotiation and PHY and waits for completion.
352  **/
353 s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
354 {
355         s32 status = IXGBE_NOT_IMPLEMENTED;
356         u32 time_out;
357         u32 max_time_out = 10;
358         u16 autoneg_speed_selection_register = 0x10;
359         u16 autoneg_restart_mask = 0x0200;
360         u16 autoneg_complete_mask = 0x0020;
361         u16 autoneg_reg = 0;
362
363         /*
364          * Set advertisement settings in PHY based on autoneg_advertised
365          * settings. If autoneg_advertised = 0, then advertise default values
366          * txn devices cannot be "forced" to a autoneg 10G and fail.  But can
367          * for a 1G.
368          */
369         ixgbe_read_phy_reg(hw,
370                   autoneg_speed_selection_register,
371                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
372                   &autoneg_reg);
373
374         if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
375                 autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
376         else
377                 autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
378
379         ixgbe_write_phy_reg(hw,
380                   autoneg_speed_selection_register,
381                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
382                   autoneg_reg);
383
384
385         /* Restart PHY autonegotiation and wait for completion */
386         ixgbe_read_phy_reg(hw,
387                   IXGBE_MDIO_AUTO_NEG_CONTROL,
388                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
389                   &autoneg_reg);
390
391         autoneg_reg |= autoneg_restart_mask;
392
393         ixgbe_write_phy_reg(hw,
394                   IXGBE_MDIO_AUTO_NEG_CONTROL,
395                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
396                   autoneg_reg);
397
398         /* Wait for autonegotiation to finish */
399         for (time_out = 0; time_out < max_time_out; time_out++) {
400                 udelay(10);
401                 /* Restart PHY autonegotiation and wait for completion */
402                 status = ixgbe_read_phy_reg(hw,
403                                             IXGBE_MDIO_AUTO_NEG_STATUS,
404                                             IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
405                                             &autoneg_reg);
406
407                 autoneg_reg &= autoneg_complete_mask;
408                 if (autoneg_reg == autoneg_complete_mask) {
409                         status = 0;
410                         break;
411                 }
412         }
413
414         if (time_out == max_time_out)
415                 status = IXGBE_ERR_LINK_SETUP;
416
417         return status;
418 }
419
420 /**
421  *  ixgbe_check_tnx_phy_link - Determine link and speed status
422  *  @hw: pointer to hardware structure
423  *
424  *  Reads the VS1 register to determine if link is up and the current speed for
425  *  the PHY.
426  **/
427 s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed,
428                              bool *link_up)
429 {
430         s32 status = 0;
431         u32 time_out;
432         u32 max_time_out = 10;
433         u16 phy_link = 0;
434         u16 phy_speed = 0;
435         u16 phy_data = 0;
436
437         /* Initialize speed and link to default case */
438         *link_up = false;
439         *speed = IXGBE_LINK_SPEED_10GB_FULL;
440
441         /*
442          * Check current speed and link status of the PHY register.
443          * This is a vendor specific register and may have to
444          * be changed for other copper PHYs.
445          */
446         for (time_out = 0; time_out < max_time_out; time_out++) {
447                 udelay(10);
448                 if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
449                         *link_up = true;
450                         if (phy_speed ==
451                             IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
452                                 *speed = IXGBE_LINK_SPEED_1GB_FULL;
453                         break;
454                 } else {
455                         status = ixgbe_read_phy_reg(hw,
456                                      IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
457                                      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
458                                      &phy_data);
459                         phy_link = phy_data &
460                                 IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
461                         phy_speed = phy_data &
462                                 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
463                 }
464         }
465
466         return status;
467 }
468
469 /**
470  *  ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
471  *  @hw: pointer to hardware structure
472  *  @speed: new link speed
473  *  @autoneg: true if autonegotiation enabled
474  **/
475 s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed,
476                                    bool autoneg,
477                                    bool autoneg_wait_to_complete)
478 {
479         /*
480          * Clear autoneg_advertised and set new values based on input link
481          * speed.
482          */
483         hw->phy.autoneg_advertised = 0;
484
485         if (speed & IXGBE_LINK_SPEED_10GB_FULL)
486                 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
487         if (speed & IXGBE_LINK_SPEED_1GB_FULL)
488                 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
489
490         /* Setup link based on the new speed settings */
491         ixgbe_setup_tnx_phy_link(hw);
492
493         return 0;
494 }