2 * linux/arch/arm/mm/proc-xscale.S
4 * Author: Nicolas Pitre
5 * Created: November 2000
6 * Copyright: (C) 2000, 2001 MontaVista Software Inc.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 * MMU functions for the Intel XScale CPUs
15 * some contributions by Brett Gaines <brett.w.gaines@intel.com>
16 * Copyright 2001 by Intel Corp.
19 * Completely revisited, many important fixes
20 * Nicolas Pitre <nico@cam.org>
23 #include <linux/linkage.h>
24 #include <linux/init.h>
25 #include <asm/assembler.h>
26 #include <asm/hwcap.h>
27 #include <asm/pgtable.h>
28 #include <asm/pgtable-hwdef.h>
30 #include <asm/ptrace.h>
31 #include "proc-macros.S"
34 * This is the maximum size of an area which will be flushed. If the area
35 * is larger than this, then we flush the whole cache
37 #define MAX_AREA_SIZE 32768
40 * the cache line size of the I and D cache
42 #define CACHELINESIZE 32
45 * the size of the data cache
47 #define CACHESIZE 32768
50 * Virtual address used to allocate the cache when flushed
52 * This must be an address range which is _never_ used. It should
53 * apparently have a mapping in the corresponding page table for
54 * compatibility with future CPUs that _could_ require it. For instance we
57 * This must be aligned on a 2*CACHESIZE boundary. The code selects one of
58 * the 2 areas in alternance each time the clean_d_cache macro is used.
59 * Without this the XScale core exhibits cache eviction problems and no one
62 * Reminder: the vector table is located at 0xffff0000-0xffff0fff.
64 #define CLEAN_ADDR 0xfffe0000
67 * This macro is used to wait for a CP15 write and is needed
68 * when we have to ensure that the last operation to the co-pro
69 * was completed before continuing with operation.
72 mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
73 mov \rd, \rd @ wait for completion
74 sub pc, pc, #4 @ flush instruction pipeline
77 .macro cpwait_ret, lr, rd
78 mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
79 sub pc, \lr, \rd, LSR #32 @ wait for completion and
80 @ flush instruction pipeline
84 * This macro cleans the entire dcache using line allocate.
85 * The main loop has been unrolled to reduce loop overhead.
86 * rd and rs are two scratch registers.
88 .macro clean_d_cache, rd, rs
91 eor \rd, \rd, #CACHESIZE
93 add \rs, \rd, #CACHESIZE
94 1: mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
95 add \rd, \rd, #CACHELINESIZE
96 mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
97 add \rd, \rd, #CACHELINESIZE
98 mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
99 add \rd, \rd, #CACHELINESIZE
100 mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line
101 add \rd, \rd, #CACHELINESIZE
107 clean_addr: .word CLEAN_ADDR
112 * cpu_xscale_proc_init()
114 * Nothing too exciting at the moment
116 ENTRY(cpu_xscale_proc_init)
117 @ enable write buffer coalescing. Some bootloader disable it
118 mrc p15, 0, r1, c1, c0, 1
120 mcr p15, 0, r1, c1, c0, 1
124 * cpu_xscale_proc_fin()
126 ENTRY(cpu_xscale_proc_fin)
128 mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
130 bl xscale_flush_kern_cache_all @ clean caches
131 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
132 bic r0, r0, #0x1800 @ ...IZ...........
133 bic r0, r0, #0x0006 @ .............CA.
134 mcr p15, 0, r0, c1, c0, 0 @ disable caches
138 * cpu_xscale_reset(loc)
140 * Perform a soft reset of the system. Put the CPU into the
141 * same state as it would be if it had been reset, and branch
142 * to what would be the reset vector.
144 * loc: location to jump to for soft reset
146 * Beware PXA270 erratum E7.
149 ENTRY(cpu_xscale_reset)
150 mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
151 msr cpsr_c, r1 @ reset CPSR
152 mcr p15, 0, r1, c10, c4, 1 @ unlock I-TLB
153 mcr p15, 0, r1, c8, c5, 0 @ invalidate I-TLB
154 mrc p15, 0, r1, c1, c0, 0 @ ctrl register
155 bic r1, r1, #0x0086 @ ........B....CA.
156 bic r1, r1, #0x3900 @ ..VIZ..S........
157 sub pc, pc, #4 @ flush pipeline
158 @ *** cache line aligned ***
159 mcr p15, 0, r1, c1, c0, 0 @ ctrl register
160 bic r1, r1, #0x0001 @ ...............M
161 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
162 mcr p15, 0, r1, c1, c0, 0 @ ctrl register
163 @ CAUTION: MMU turned off from this point. We count on the pipeline
164 @ already containing those two last instructions to survive.
165 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
169 * cpu_xscale_do_idle()
171 * Cause the processor to idle
173 * For now we do nothing but go to idle mode for every case
175 * XScale supports clock switching, but using idle mode support
176 * allows external hardware to react to system state changes.
180 ENTRY(cpu_xscale_do_idle)
182 mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
185 /* ================================= CACHE ================================ */
188 * flush_user_cache_all()
190 * Invalidate all cache entries in a particular address
193 ENTRY(xscale_flush_user_cache_all)
197 * flush_kern_cache_all()
199 * Clean and invalidate the entire cache.
201 ENTRY(xscale_flush_kern_cache_all)
207 mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
208 mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
212 * flush_user_cache_range(start, end, vm_flags)
214 * Invalidate a range of cache entries in the specified
217 * - start - start address (may not be aligned)
218 * - end - end address (exclusive, may not be aligned)
219 * - vma - vma_area_struct describing address space
222 ENTRY(xscale_flush_user_cache_range)
224 sub r3, r1, r0 @ calculate total size
225 cmp r3, #MAX_AREA_SIZE
226 bhs __flush_whole_cache
229 mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
230 mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line
231 mcr p15, 0, r0, c7, c6, 1 @ Invalidate D cache line
232 add r0, r0, #CACHELINESIZE
236 mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
237 mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
241 * coherent_kern_range(start, end)
243 * Ensure coherency between the Icache and the Dcache in the
244 * region described by start. If you have non-snooping
245 * Harvard caches, you need to implement this function.
247 * - start - virtual start address
248 * - end - virtual end address
250 * Note: single I-cache line invalidation isn't used here since
251 * it also trashes the mini I-cache used by JTAG debuggers.
253 ENTRY(xscale_coherent_kern_range)
254 bic r0, r0, #CACHELINESIZE - 1
255 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
256 add r0, r0, #CACHELINESIZE
260 mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
261 mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
265 * coherent_user_range(start, end)
267 * Ensure coherency between the Icache and the Dcache in the
268 * region described by start. If you have non-snooping
269 * Harvard caches, you need to implement this function.
271 * - start - virtual start address
272 * - end - virtual end address
274 ENTRY(xscale_coherent_user_range)
275 bic r0, r0, #CACHELINESIZE - 1
276 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
277 mcr p15, 0, r0, c7, c5, 1 @ Invalidate I cache entry
278 add r0, r0, #CACHELINESIZE
282 mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB
283 mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
287 * flush_kern_dcache_page(void *page)
289 * Ensure no D cache aliasing occurs, either with itself or
292 * - addr - page aligned address
294 ENTRY(xscale_flush_kern_dcache_page)
296 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
297 mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
298 add r0, r0, #CACHELINESIZE
302 mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
303 mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
307 * dma_inv_range(start, end)
309 * Invalidate (discard) the specified virtual address range.
310 * May not write back any entries. If 'start' or 'end'
311 * are not cache line aligned, those lines must be written
314 * - start - virtual start address
315 * - end - virtual end address
317 ENTRY(xscale_dma_inv_range)
318 tst r0, #CACHELINESIZE - 1
319 bic r0, r0, #CACHELINESIZE - 1
320 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
321 tst r1, #CACHELINESIZE - 1
322 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
323 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
324 add r0, r0, #CACHELINESIZE
327 mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
331 * dma_clean_range(start, end)
333 * Clean the specified virtual address range.
335 * - start - virtual start address
336 * - end - virtual end address
338 ENTRY(xscale_dma_clean_range)
339 bic r0, r0, #CACHELINESIZE - 1
340 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
341 add r0, r0, #CACHELINESIZE
344 mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
348 * dma_flush_range(start, end)
350 * Clean and invalidate the specified virtual address range.
352 * - start - virtual start address
353 * - end - virtual end address
355 ENTRY(xscale_dma_flush_range)
356 bic r0, r0, #CACHELINESIZE - 1
357 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
358 mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
359 add r0, r0, #CACHELINESIZE
362 mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer
365 ENTRY(xscale_cache_fns)
366 .long xscale_flush_kern_cache_all
367 .long xscale_flush_user_cache_all
368 .long xscale_flush_user_cache_range
369 .long xscale_coherent_kern_range
370 .long xscale_coherent_user_range
371 .long xscale_flush_kern_dcache_page
372 .long xscale_dma_inv_range
373 .long xscale_dma_clean_range
374 .long xscale_dma_flush_range
377 * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
378 * clear the dirty bits, which means that if we invalidate a dirty line,
379 * the dirty data can still be written back to external memory later on.
381 * The recommended workaround is to always do a clean D-cache line before
382 * doing an invalidate D-cache line, so on the affected processors,
383 * dma_inv_range() is implemented as dma_flush_range().
385 * See erratum #25 of "Intel 80200 Processor Specification Update",
386 * revision January 22, 2003, available at:
387 * http://www.intel.com/design/iio/specupdt/273415.htm
389 ENTRY(xscale_80200_A0_A1_cache_fns)
390 .long xscale_flush_kern_cache_all
391 .long xscale_flush_user_cache_all
392 .long xscale_flush_user_cache_range
393 .long xscale_coherent_kern_range
394 .long xscale_coherent_user_range
395 .long xscale_flush_kern_dcache_page
396 .long xscale_dma_flush_range
397 .long xscale_dma_clean_range
398 .long xscale_dma_flush_range
400 ENTRY(cpu_xscale_dcache_clean_area)
401 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
402 add r0, r0, #CACHELINESIZE
403 subs r1, r1, #CACHELINESIZE
407 /* =============================== PageTable ============================== */
410 * cpu_xscale_switch_mm(pgd)
412 * Set the translation base pointer to be as described by pgd.
414 * pgd: new page tables
417 ENTRY(cpu_xscale_switch_mm)
419 mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
420 mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
421 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
422 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
426 * cpu_xscale_set_pte_ext(ptep, pte, ext)
428 * Set a PTE and flush it out
430 * Errata 40: must set memory to write-through for user read-only pages.
433 .long 0x00 @ L_PTE_MT_UNCACHED
434 .long PTE_BUFFERABLE @ L_PTE_MT_BUFFERABLE
435 .long PTE_CACHEABLE @ L_PTE_MT_WRITETHROUGH
436 .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEBACK
437 .long PTE_EXT_TEX(1) | PTE_BUFFERABLE @ L_PTE_MT_DEV_SHARED
439 .long PTE_EXT_TEX(1) | PTE_CACHEABLE @ L_PTE_MT_MINICACHE
440 .long PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
442 .long PTE_BUFFERABLE @ L_PTE_MT_DEV_WC
444 .long PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_DEV_CACHED
445 .long 0x00 @ L_PTE_MT_DEV_NONSHARED
451 ENTRY(cpu_xscale_set_pte_ext)
452 xscale_set_pte_ext_prologue
455 @ Erratum 40: must set memory to write-through for user read-only pages
457 and ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_WRITE) & ~(4 << 2)
458 teq ip, #L_PTE_MT_WRITEBACK | L_PTE_USER
460 moveq r1, #L_PTE_MT_WRITETHROUGH
461 and r1, r1, #L_PTE_MT_MASK
462 adr ip, cpu_xscale_mt_table
467 xscale_set_pte_ext_epilogue
477 .type __xscale_setup, #function
479 mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
480 mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
481 mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
482 mov r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
483 orr r0, r0, #1 << 13 @ Its undefined whether this
484 mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
488 mrc p15, 0, r0, c1, c0, 0 @ get control register
492 .size __xscale_setup, . - __xscale_setup
496 * .RVI ZFRS BLDP WCAM
497 * ..11 1.01 .... .101
500 .type xscale_crval, #object
502 crval clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
507 * Purpose : Function pointers used to access above functions - all calls
511 .type xscale_processor_functions, #object
512 ENTRY(xscale_processor_functions)
513 .word v5t_early_abort
515 .word cpu_xscale_proc_init
516 .word cpu_xscale_proc_fin
517 .word cpu_xscale_reset
518 .word cpu_xscale_do_idle
519 .word cpu_xscale_dcache_clean_area
520 .word cpu_xscale_switch_mm
521 .word cpu_xscale_set_pte_ext
522 .size xscale_processor_functions, . - xscale_processor_functions
526 .type cpu_arch_name, #object
529 .size cpu_arch_name, . - cpu_arch_name
531 .type cpu_elf_name, #object
534 .size cpu_elf_name, . - cpu_elf_name
536 .type cpu_80200_A0_A1_name, #object
537 cpu_80200_A0_A1_name:
538 .asciz "XScale-80200 A0/A1"
539 .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name
541 .type cpu_80200_name, #object
543 .asciz "XScale-80200"
544 .size cpu_80200_name, . - cpu_80200_name
546 .type cpu_80219_name, #object
548 .asciz "XScale-80219"
549 .size cpu_80219_name, . - cpu_80219_name
551 .type cpu_8032x_name, #object
553 .asciz "XScale-IOP8032x Family"
554 .size cpu_8032x_name, . - cpu_8032x_name
556 .type cpu_8033x_name, #object
558 .asciz "XScale-IOP8033x Family"
559 .size cpu_8033x_name, . - cpu_8033x_name
561 .type cpu_pxa250_name, #object
563 .asciz "XScale-PXA250"
564 .size cpu_pxa250_name, . - cpu_pxa250_name
566 .type cpu_pxa210_name, #object
568 .asciz "XScale-PXA210"
569 .size cpu_pxa210_name, . - cpu_pxa210_name
571 .type cpu_ixp42x_name, #object
573 .asciz "XScale-IXP42x Family"
574 .size cpu_ixp42x_name, . - cpu_ixp42x_name
576 .type cpu_ixp43x_name, #object
578 .asciz "XScale-IXP43x Family"
579 .size cpu_ixp43x_name, . - cpu_ixp43x_name
581 .type cpu_ixp46x_name, #object
583 .asciz "XScale-IXP46x Family"
584 .size cpu_ixp46x_name, . - cpu_ixp46x_name
586 .type cpu_ixp2400_name, #object
588 .asciz "XScale-IXP2400"
589 .size cpu_ixp2400_name, . - cpu_ixp2400_name
591 .type cpu_ixp2800_name, #object
593 .asciz "XScale-IXP2800"
594 .size cpu_ixp2800_name, . - cpu_ixp2800_name
596 .type cpu_pxa255_name, #object
598 .asciz "XScale-PXA255"
599 .size cpu_pxa255_name, . - cpu_pxa255_name
601 .type cpu_pxa270_name, #object
603 .asciz "XScale-PXA270"
604 .size cpu_pxa270_name, . - cpu_pxa270_name
608 .section ".proc.info.init", #alloc, #execinstr
610 .type __80200_A0_A1_proc_info,#object
611 __80200_A0_A1_proc_info:
614 .long PMD_TYPE_SECT | \
615 PMD_SECT_BUFFERABLE | \
616 PMD_SECT_CACHEABLE | \
617 PMD_SECT_AP_WRITE | \
619 .long PMD_TYPE_SECT | \
620 PMD_SECT_AP_WRITE | \
625 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
627 .long xscale_processor_functions
629 .long xscale_mc_user_fns
630 .long xscale_80200_A0_A1_cache_fns
631 .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info
633 .type __80200_proc_info,#object
637 .long PMD_TYPE_SECT | \
638 PMD_SECT_BUFFERABLE | \
639 PMD_SECT_CACHEABLE | \
640 PMD_SECT_AP_WRITE | \
642 .long PMD_TYPE_SECT | \
643 PMD_SECT_AP_WRITE | \
648 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
650 .long xscale_processor_functions
652 .long xscale_mc_user_fns
653 .long xscale_cache_fns
654 .size __80200_proc_info, . - __80200_proc_info
656 .type __80219_proc_info,#object
660 .long PMD_TYPE_SECT | \
661 PMD_SECT_BUFFERABLE | \
662 PMD_SECT_CACHEABLE | \
663 PMD_SECT_AP_WRITE | \
665 .long PMD_TYPE_SECT | \
666 PMD_SECT_AP_WRITE | \
671 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
673 .long xscale_processor_functions
675 .long xscale_mc_user_fns
676 .long xscale_cache_fns
677 .size __80219_proc_info, . - __80219_proc_info
679 .type __8032x_proc_info,#object
683 .long PMD_TYPE_SECT | \
684 PMD_SECT_BUFFERABLE | \
685 PMD_SECT_CACHEABLE | \
686 PMD_SECT_AP_WRITE | \
688 .long PMD_TYPE_SECT | \
689 PMD_SECT_AP_WRITE | \
694 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
696 .long xscale_processor_functions
698 .long xscale_mc_user_fns
699 .long xscale_cache_fns
700 .size __8032x_proc_info, . - __8032x_proc_info
702 .type __8033x_proc_info,#object
706 .long PMD_TYPE_SECT | \
707 PMD_SECT_BUFFERABLE | \
708 PMD_SECT_CACHEABLE | \
709 PMD_SECT_AP_WRITE | \
711 .long PMD_TYPE_SECT | \
712 PMD_SECT_AP_WRITE | \
717 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
719 .long xscale_processor_functions
721 .long xscale_mc_user_fns
722 .long xscale_cache_fns
723 .size __8033x_proc_info, . - __8033x_proc_info
725 .type __pxa250_proc_info,#object
729 .long PMD_TYPE_SECT | \
730 PMD_SECT_BUFFERABLE | \
731 PMD_SECT_CACHEABLE | \
732 PMD_SECT_AP_WRITE | \
734 .long PMD_TYPE_SECT | \
735 PMD_SECT_AP_WRITE | \
740 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
741 .long cpu_pxa250_name
742 .long xscale_processor_functions
744 .long xscale_mc_user_fns
745 .long xscale_cache_fns
746 .size __pxa250_proc_info, . - __pxa250_proc_info
748 .type __pxa210_proc_info,#object
752 .long PMD_TYPE_SECT | \
753 PMD_SECT_BUFFERABLE | \
754 PMD_SECT_CACHEABLE | \
755 PMD_SECT_AP_WRITE | \
757 .long PMD_TYPE_SECT | \
758 PMD_SECT_AP_WRITE | \
763 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
764 .long cpu_pxa210_name
765 .long xscale_processor_functions
767 .long xscale_mc_user_fns
768 .long xscale_cache_fns
769 .size __pxa210_proc_info, . - __pxa210_proc_info
771 .type __ixp2400_proc_info, #object
775 .long PMD_TYPE_SECT | \
776 PMD_SECT_BUFFERABLE | \
777 PMD_SECT_CACHEABLE | \
778 PMD_SECT_AP_WRITE | \
780 .long PMD_TYPE_SECT | \
781 PMD_SECT_AP_WRITE | \
786 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
787 .long cpu_ixp2400_name
788 .long xscale_processor_functions
790 .long xscale_mc_user_fns
791 .long xscale_cache_fns
792 .size __ixp2400_proc_info, . - __ixp2400_proc_info
794 .type __ixp2800_proc_info, #object
798 .long PMD_TYPE_SECT | \
799 PMD_SECT_BUFFERABLE | \
800 PMD_SECT_CACHEABLE | \
801 PMD_SECT_AP_WRITE | \
803 .long PMD_TYPE_SECT | \
804 PMD_SECT_AP_WRITE | \
809 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
810 .long cpu_ixp2800_name
811 .long xscale_processor_functions
813 .long xscale_mc_user_fns
814 .long xscale_cache_fns
815 .size __ixp2800_proc_info, . - __ixp2800_proc_info
817 .type __ixp42x_proc_info, #object
821 .long PMD_TYPE_SECT | \
822 PMD_SECT_BUFFERABLE | \
823 PMD_SECT_CACHEABLE | \
824 PMD_SECT_AP_WRITE | \
826 .long PMD_TYPE_SECT | \
827 PMD_SECT_AP_WRITE | \
832 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
833 .long cpu_ixp42x_name
834 .long xscale_processor_functions
836 .long xscale_mc_user_fns
837 .long xscale_cache_fns
838 .size __ixp42x_proc_info, . - __ixp42x_proc_info
840 .type __ixp43x_proc_info, #object
844 .long PMD_TYPE_SECT | \
845 PMD_SECT_BUFFERABLE | \
846 PMD_SECT_CACHEABLE | \
847 PMD_SECT_AP_WRITE | \
849 .long PMD_TYPE_SECT | \
850 PMD_SECT_AP_WRITE | \
855 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
856 .long cpu_ixp43x_name
857 .long xscale_processor_functions
859 .long xscale_mc_user_fns
860 .long xscale_cache_fns
861 .size __ixp43x_proc_info, . - __ixp43x_proc_info
863 .type __ixp46x_proc_info, #object
867 .long PMD_TYPE_SECT | \
868 PMD_SECT_BUFFERABLE | \
869 PMD_SECT_CACHEABLE | \
870 PMD_SECT_AP_WRITE | \
872 .long PMD_TYPE_SECT | \
873 PMD_SECT_AP_WRITE | \
878 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
879 .long cpu_ixp46x_name
880 .long xscale_processor_functions
882 .long xscale_mc_user_fns
883 .long xscale_cache_fns
884 .size __ixp46x_proc_info, . - __ixp46x_proc_info
886 .type __pxa255_proc_info,#object
890 .long PMD_TYPE_SECT | \
891 PMD_SECT_BUFFERABLE | \
892 PMD_SECT_CACHEABLE | \
893 PMD_SECT_AP_WRITE | \
895 .long PMD_TYPE_SECT | \
896 PMD_SECT_AP_WRITE | \
901 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
902 .long cpu_pxa255_name
903 .long xscale_processor_functions
905 .long xscale_mc_user_fns
906 .long xscale_cache_fns
907 .size __pxa255_proc_info, . - __pxa255_proc_info
909 .type __pxa270_proc_info,#object
913 .long PMD_TYPE_SECT | \
914 PMD_SECT_BUFFERABLE | \
915 PMD_SECT_CACHEABLE | \
916 PMD_SECT_AP_WRITE | \
918 .long PMD_TYPE_SECT | \
919 PMD_SECT_AP_WRITE | \
924 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
925 .long cpu_pxa270_name
926 .long xscale_processor_functions
928 .long xscale_mc_user_fns
929 .long xscale_cache_fns
930 .size __pxa270_proc_info, . - __pxa270_proc_info