git.oblomov.eu Git - linux-2.6/blob - arch/x86/mach-voyager/voyager_basic.c

   1 /* Copyright (C) 1999,2001
   2  *
   3  * Author: J.E.J.Bottomley@HansenPartnership.com
   4  *
   5  * This file contains all the voyager specific routines for getting
   6  * initialisation of the architecture to function.  For additional
   7  * features see:
   8  *
   9  *      voyager_cat.c - Voyager CAT bus interface
  10  *      voyager_smp.c - Voyager SMP hal (emulates linux smp.c)
  11  */
  12
  13 #include <linux/module.h>
  14 #include <linux/types.h>
  15 #include <linux/sched.h>
  16 #include <linux/ptrace.h>
  17 #include <linux/ioport.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/init.h>
  20 #include <linux/delay.h>
  21 #include <linux/reboot.h>
  22 #include <linux/sysrq.h>
  23 #include <linux/smp.h>
  24 #include <linux/nodemask.h>
  25 #include <asm/io.h>
  26 #include <asm/voyager.h>
  27 #include <asm/vic.h>
  28 #include <linux/pm.h>
  29 #include <asm/tlbflush.h>
  30 #include <asm/arch_hooks.h>
  31 #include <asm/i8253.h>
  32
  33 /*
  34  * Power off function, if any
  35  */
  36 void (*pm_power_off) (void);
  37 EXPORT_SYMBOL(pm_power_off);
  38
  39 int voyager_level = 0;
  40
  41 struct voyager_SUS *voyager_SUS = NULL;
  42
  43 #ifdef CONFIG_SMP
  44 static void voyager_dump(int dummy1, struct tty_struct *dummy3)
  45 {
  46         /* get here via a sysrq */
  47         voyager_smp_dump();
  48 }
  49
  50 static struct sysrq_key_op sysrq_voyager_dump_op = {
  51         .handler = voyager_dump,
  52         .help_msg = "Voyager",
  53         .action_msg = "Dump Voyager Status",
  54 };
  55 #endif
  56
  57 void voyager_detect(struct voyager_bios_info *bios)
  58 {
  59         if (bios->len != 0xff) {
  60                 int class = (bios->class_1 << 8)
  61                     | (bios->class_2 & 0xff);
  62
  63                 printk("Voyager System detected.\n"
  64                        "        Class %x, Revision %d.%d\n",
  65                        class, bios->major, bios->minor);
  66                 if (class == VOYAGER_LEVEL4)
  67                         voyager_level = 4;
  68                 else if (class < VOYAGER_LEVEL5_AND_ABOVE)
  69                         voyager_level = 3;
  70                 else
  71                         voyager_level = 5;
  72                 printk("        Architecture Level %d\n", voyager_level);
  73                 if (voyager_level < 4)
  74                         printk
  75                             ("\n**WARNING**: Voyager HAL only supports Levels 4 and 5 Architectures at the moment\n\n");
  76                 /* install the power off handler */
  77                 pm_power_off = voyager_power_off;
  78 #ifdef CONFIG_SMP
  79                 register_sysrq_key('v', &sysrq_voyager_dump_op);
  80 #endif
  81         } else {
  82                 printk("\n\n**WARNING**: No Voyager Subsystem Found\n");
  83         }
  84 }
  85
  86 void voyager_system_interrupt(int cpl, void *dev_id)
  87 {
  88         printk("Voyager: detected system interrupt\n");
  89 }
  90
  91 /* Routine to read information from the extended CMOS area */
  92 __u8 voyager_extended_cmos_read(__u16 addr)
  93 {
  94         outb(addr & 0xff, 0x74);
  95         outb((addr >> 8) & 0xff, 0x75);
  96         return inb(0x76);
  97 }
  98
  99 /* internal definitions for the SUS Click Map of memory */
 100
 101 #define CLICK_ENTRIES   16
 102 #define CLICK_SIZE      4096    /* click to byte conversion for Length */
 103
 104 typedef struct ClickMap {
 105         struct Entry {
 106                 __u32 Address;
 107                 __u32 Length;
 108         } Entry[CLICK_ENTRIES];
 109 } ClickMap_t;
 110
 111 /* This routine is pretty much an awful hack to read the bios clickmap by
 112  * mapping it into page 0.  There are usually three regions in the map:
 113  *      Base Memory
 114  *      Extended Memory
 115  *      zero length marker for end of map
 116  *
 117  * Returns are 0 for failure and 1 for success on extracting region.
 118  */
 119 int __init voyager_memory_detect(int region, __u32 * start, __u32 * length)
 120 {
 121         int i;
 122         int retval = 0;
 123         __u8 cmos[4];
 124         ClickMap_t *map;
 125         unsigned long map_addr;
 126         unsigned long old;
 127
 128         if (region >= CLICK_ENTRIES) {
 129                 printk("Voyager: Illegal ClickMap region %d\n", region);
 130                 return 0;
 131         }
 132
 133         for (i = 0; i < sizeof(cmos); i++)
 134                 cmos[i] =
 135                     voyager_extended_cmos_read(VOYAGER_MEMORY_CLICKMAP + i);
 136
 137         map_addr = *(unsigned long *)cmos;
 138
 139         /* steal page 0 for this */
 140         old = pg0[0];
 141         pg0[0] = ((map_addr & PAGE_MASK) | _PAGE_RW | _PAGE_PRESENT);
 142         local_flush_tlb();
 143         /* now clear everything out but page 0 */
 144         map = (ClickMap_t *) (map_addr & (~PAGE_MASK));
 145
 146         /* zero length is the end of the clickmap */
 147         if (map->Entry[region].Length != 0) {
 148                 *length = map->Entry[region].Length * CLICK_SIZE;
 149                 *start = map->Entry[region].Address;
 150                 retval = 1;
 151         }
 152
 153         /* replace the mapping */
 154         pg0[0] = old;
 155         local_flush_tlb();
 156         return retval;
 157 }
 158
 159 /* voyager specific handling code for timer interrupts.  Used to hand
 160  * off the timer tick to the SMP code, since the VIC doesn't have an
 161  * internal timer (The QIC does, but that's another story). */
 162 void voyager_timer_interrupt(void)
 163 {
 164         if ((jiffies & 0x3ff) == 0) {
 165
 166                 /* There seems to be something flaky in either
 167                  * hardware or software that is resetting the timer 0
 168                  * count to something much higher than it should be
 169                  * This seems to occur in the boot sequence, just
 170                  * before root is mounted.  Therefore, every 10
 171                  * seconds or so, we sanity check the timer zero count
 172                  * and kick it back to where it should be.
 173                  *
 174                  * FIXME: This is the most awful hack yet seen.  I
 175                  * should work out exactly what is interfering with
 176                  * the timer count settings early in the boot sequence
 177                  * and swiftly introduce it to something sharp and
 178                  * pointy.  */
 179                 __u16 val;
 180
 181                 spin_lock(&i8253_lock);
 182
 183                 outb_p(0x00, 0x43);
 184                 val = inb_p(0x40);
 185                 val |= inb(0x40) << 8;
 186                 spin_unlock(&i8253_lock);
 187
 188                 if (val > LATCH) {
 189                         printk
 190                             ("\nVOYAGER: countdown timer value too high (%d), resetting\n\n",
 191                              val);
 192                         spin_lock(&i8253_lock);
 193                         outb(0x34, 0x43);
 194                         outb_p(LATCH & 0xff, 0x40);     /* LSB */
 195                         outb(LATCH >> 8, 0x40); /* MSB */
 196                         spin_unlock(&i8253_lock);
 197                 }
 198         }
 199 #ifdef CONFIG_SMP
 200         smp_vic_timer_interrupt();
 201 #endif
 202 }
 203
 204 void voyager_power_off(void)
 205 {
 206         printk("VOYAGER Power Off\n");
 207
 208         if (voyager_level == 5) {
 209                 voyager_cat_power_off();
 210         } else if (voyager_level == 4) {
 211                 /* This doesn't apparently work on most L4 machines,
 212                  * but the specs say to do this to get automatic power
 213                  * off.  Unfortunately, if it doesn't power off the
 214                  * machine, it ends up doing a cold restart, which
 215                  * isn't really intended, so comment out the code */
 216 #if 0
 217                 int port;
 218
 219                 /* enable the voyager Configuration Space */
 220                 outb((inb(VOYAGER_MC_SETUP) & 0xf0) | 0x8, VOYAGER_MC_SETUP);
 221                 /* the port for the power off flag is an offset from the
 222                    floating base */
 223                 port = (inb(VOYAGER_SSPB_RELOCATION_PORT) << 8) + 0x21;
 224                 /* set the power off flag */
 225                 outb(inb(port) | 0x1, port);
 226 #endif
 227         }
 228         /* and wait for it to happen */
 229         local_irq_disable();
 230         for (;;)
 231                 halt();
 232 }
 233
 234 /* copied from process.c */
 235 static inline void kb_wait(void)
 236 {
 237         int i;
 238
 239         for (i = 0; i < 0x10000; i++)
 240                 if ((inb_p(0x64) & 0x02) == 0)
 241                         break;
 242 }
 243
 244 void machine_shutdown(void)
 245 {
 246         /* Architecture specific shutdown needed before a kexec */
 247 }
 248
 249 void machine_restart(char *cmd)
 250 {
 251         printk("Voyager Warm Restart\n");
 252         kb_wait();
 253
 254         if (voyager_level == 5) {
 255                 /* write magic values to the RTC to inform system that
 256                  * shutdown is beginning */
 257                 outb(0x8f, 0x70);
 258                 outb(0x5, 0x71);
 259
 260                 udelay(50);
 261                 outb(0xfe, 0x64);       /* pull reset low */
 262         } else if (voyager_level == 4) {
 263                 __u16 catbase = inb(VOYAGER_SSPB_RELOCATION_PORT) << 8;
 264                 __u8 basebd = inb(VOYAGER_MC_SETUP);
 265
 266                 outb(basebd | 0x08, VOYAGER_MC_SETUP);
 267                 outb(0x02, catbase + 0x21);
 268         }
 269         local_irq_disable();
 270         for (;;)
 271                 halt();
 272 }
 273
 274 void machine_emergency_restart(void)
 275 {
 276         /*for now, just hook this to a warm restart */
 277         machine_restart(NULL);
 278 }
 279
 280 void mca_nmi_hook(void)
 281 {
 282         __u8 dumpval __maybe_unused = inb(0xf823);
 283         __u8 swnmi __maybe_unused = inb(0xf813);
 284
 285         /* FIXME: assume dump switch pressed */
 286         /* check to see if the dump switch was pressed */
 287         VDEBUG(("VOYAGER: dumpval = 0x%x, swnmi = 0x%x\n", dumpval, swnmi));
 288         /* clear swnmi */
 289         outb(0xff, 0xf813);
 290         /* tell SUS to ignore dump */
 291         if (voyager_level == 5 && voyager_SUS != NULL) {
 292                 if (voyager_SUS->SUS_mbox == VOYAGER_DUMP_BUTTON_NMI) {
 293                         voyager_SUS->kernel_mbox = VOYAGER_NO_COMMAND;
 294                         voyager_SUS->kernel_flags |= VOYAGER_OS_IN_PROGRESS;
 295                         udelay(1000);
 296                         voyager_SUS->kernel_mbox = VOYAGER_IGNORE_DUMP;
 297                         voyager_SUS->kernel_flags &= ~VOYAGER_OS_IN_PROGRESS;
 298                 }
 299         }
 300         printk(KERN_ERR
 301                "VOYAGER: Dump switch pressed, printing CPU%d tracebacks\n",
 302                smp_processor_id());
 303         show_stack(NULL, NULL);
 304         show_state();
 305 }
 306
 307 void machine_halt(void)
 308 {
 309         /* treat a halt like a power off */
 310         machine_power_off();
 311 }
 312
 313 void machine_power_off(void)
 314 {
 315         if (pm_power_off)
 316                 pm_power_off();
 317 }