git.oblomov.eu Git - linux-2.6/blob - drivers/char/mwave/mwavedd.c

   1 /*
   2 *
   3 * mwavedd.c -- mwave device driver
   4 *
   5 *
   6 * Written By: Mike Sullivan IBM Corporation
   7 *
   8 * Copyright (C) 1999 IBM Corporation
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2 of the License, or
  13 * (at your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 *
  20 * NO WARRANTY
  21 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25 * solely responsible for determining the appropriateness of using and
  26 * distributing the Program and assumes all risks associated with its
  27 * exercise of rights under this Agreement, including but not limited to
  28 * the risks and costs of program errors, damage to or loss of data,
  29 * programs or equipment, and unavailability or interruption of operations.
  30 *
  31 * DISCLAIMER OF LIABILITY
  32 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39 *
  40 * You should have received a copy of the GNU General Public License
  41 * along with this program; if not, write to the Free Software
  42 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  43 *
  44 *
  45 * 10/23/2000 - Alpha Release
  46 *       First release to the public
  47 */
  48
  49 #include <linux/module.h>
  50 #include <linux/kernel.h>
  51 #include <linux/fs.h>
  52 #include <linux/init.h>
  53 #include <linux/major.h>
  54 #include <linux/miscdevice.h>
  55 #include <linux/device.h>
  56 #include <linux/serial.h>
  57 #include <linux/sched.h>
  58 #include <linux/spinlock.h>
  59 #include <linux/delay.h>
  60 #include <linux/serial_8250.h>
  61 #include "smapi.h"
  62 #include "mwavedd.h"
  63 #include "3780i.h"
  64 #include "tp3780i.h"
  65
  66 MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver");
  67 MODULE_AUTHOR("Mike Sullivan and Paul Schroeder");
  68 MODULE_LICENSE("GPL");
  69
  70 /*
  71 * These parameters support the setting of MWave resources. Note that no
  72 * checks are made against other devices (ie. superio) for conflicts.
  73 * We'll depend on users using the tpctl utility to do that for now
  74 */
  75 int mwave_debug = 0;
  76 int mwave_3780i_irq = 0;
  77 int mwave_3780i_io = 0;
  78 int mwave_uart_irq = 0;
  79 int mwave_uart_io = 0;
  80 module_param(mwave_debug, int, 0);
  81 module_param(mwave_3780i_irq, int, 0);
  82 module_param(mwave_3780i_io, int, 0);
  83 module_param(mwave_uart_irq, int, 0);
  84 module_param(mwave_uart_io, int, 0);
  85
  86 static int mwave_open(struct inode *inode, struct file *file);
  87 static int mwave_close(struct inode *inode, struct file *file);
  88 static int mwave_ioctl(struct inode *inode, struct file *filp,
  89                        unsigned int iocmd, unsigned long ioarg);
  90
  91 MWAVE_DEVICE_DATA mwave_s_mdd;
  92
  93 static int mwave_open(struct inode *inode, struct file *file)
  94 {
  95         unsigned int retval = 0;
  96
  97         PRINTK_3(TRACE_MWAVE,
  98                 "mwavedd::mwave_open, entry inode %p file %p\n",
  99                  inode, file);
 100         PRINTK_2(TRACE_MWAVE,
 101                 "mwavedd::mwave_open, exit return retval %x\n", retval);
 102
 103         return retval;
 104 }
 105
 106 static int mwave_close(struct inode *inode, struct file *file)
 107 {
 108         unsigned int retval = 0;
 109
 110         PRINTK_3(TRACE_MWAVE,
 111                 "mwavedd::mwave_close, entry inode %p file %p\n",
 112                  inode,  file);
 113
 114         PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n",
 115                 retval);
 116
 117         return retval;
 118 }
 119
 120 static int mwave_ioctl(struct inode *inode, struct file *file,
 121                        unsigned int iocmd, unsigned long ioarg)
 122 {
 123         unsigned int retval = 0;
 124         pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
 125         void __user *arg = (void __user *)ioarg;
 126
 127         PRINTK_5(TRACE_MWAVE,
 128                 "mwavedd::mwave_ioctl, entry inode %p file %p cmd %x arg %x\n",
 129                  inode,  file, iocmd, (int) ioarg);
 130
 131         switch (iocmd) {
 132
 133                 case IOCTL_MW_RESET:
 134                         PRINTK_1(TRACE_MWAVE,
 135                                 "mwavedd::mwave_ioctl, IOCTL_MW_RESET"
 136                                 " calling tp3780I_ResetDSP\n");
 137                         retval = tp3780I_ResetDSP(&pDrvData->rBDData);
 138                         PRINTK_2(TRACE_MWAVE,
 139                                 "mwavedd::mwave_ioctl, IOCTL_MW_RESET"
 140                                 " retval %x from tp3780I_ResetDSP\n",
 141                                 retval);
 142                         break;
 143
 144                 case IOCTL_MW_RUN:
 145                         PRINTK_1(TRACE_MWAVE,
 146                                 "mwavedd::mwave_ioctl, IOCTL_MW_RUN"
 147                                 " calling tp3780I_StartDSP\n");
 148                         retval = tp3780I_StartDSP(&pDrvData->rBDData);
 149                         PRINTK_2(TRACE_MWAVE,
 150                                 "mwavedd::mwave_ioctl, IOCTL_MW_RUN"
 151                                 " retval %x from tp3780I_StartDSP\n",
 152                                 retval);
 153                         break;
 154
 155                 case IOCTL_MW_DSP_ABILITIES: {
 156                         MW_ABILITIES rAbilities;
 157
 158                         PRINTK_1(TRACE_MWAVE,
 159                                 "mwavedd::mwave_ioctl,"
 160                                 " IOCTL_MW_DSP_ABILITIES calling"
 161                                 " tp3780I_QueryAbilities\n");
 162                         retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
 163                                         &rAbilities);
 164                         PRINTK_2(TRACE_MWAVE,
 165                                 "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
 166                                 " retval %x from tp3780I_QueryAbilities\n",
 167                                 retval);
 168                         if (retval == 0) {
 169                                 if( copy_to_user(arg, &rAbilities,
 170                                                         sizeof(MW_ABILITIES)) )
 171                                         return -EFAULT;
 172                         }
 173                         PRINTK_2(TRACE_MWAVE,
 174                                 "mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
 175                                 " exit retval %x\n",
 176                                 retval);
 177                 }
 178                         break;
 179
 180                 case IOCTL_MW_READ_DATA:
 181                 case IOCTL_MW_READCLEAR_DATA: {
 182                         MW_READWRITE rReadData;
 183                         unsigned short __user *pusBuffer = NULL;
 184
 185                         if( copy_from_user(&rReadData, arg,
 186                                                 sizeof(MW_READWRITE)) )
 187                                 return -EFAULT;
 188                         pusBuffer = (unsigned short __user *) (rReadData.pBuf);
 189
 190                         PRINTK_4(TRACE_MWAVE,
 191                                 "mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
 192                                 " size %lx, ioarg %lx pusBuffer %p\n",
 193                                 rReadData.ulDataLength, ioarg, pusBuffer);
 194                         retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 195                                         iocmd,
 196                                         pusBuffer,
 197                                         rReadData.ulDataLength,
 198                                         rReadData.usDspAddress);
 199                 }
 200                         break;
 201
 202                 case IOCTL_MW_READ_INST: {
 203                         MW_READWRITE rReadData;
 204                         unsigned short __user *pusBuffer = NULL;
 205
 206                         if( copy_from_user(&rReadData, arg,
 207                                                 sizeof(MW_READWRITE)) )
 208                                 return -EFAULT;
 209                         pusBuffer = (unsigned short __user *) (rReadData.pBuf);
 210
 211                         PRINTK_4(TRACE_MWAVE,
 212                                 "mwavedd::mwave_ioctl IOCTL_MW_READ_INST,"
 213                                 " size %lx, ioarg %lx pusBuffer %p\n",
 214                                 rReadData.ulDataLength / 2, ioarg,
 215                                 pusBuffer);
 216                         retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 217                                 iocmd, pusBuffer,
 218                                 rReadData.ulDataLength / 2,
 219                                 rReadData.usDspAddress);
 220                 }
 221                         break;
 222
 223                 case IOCTL_MW_WRITE_DATA: {
 224                         MW_READWRITE rWriteData;
 225                         unsigned short __user *pusBuffer = NULL;
 226
 227                         if( copy_from_user(&rWriteData, arg,
 228                                                 sizeof(MW_READWRITE)) )
 229                                 return -EFAULT;
 230                         pusBuffer = (unsigned short __user *) (rWriteData.pBuf);
 231
 232                         PRINTK_4(TRACE_MWAVE,
 233                                 "mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA,"
 234                                 " size %lx, ioarg %lx pusBuffer %p\n",
 235                                 rWriteData.ulDataLength, ioarg,
 236                                 pusBuffer);
 237                         retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
 238                                         iocmd, pusBuffer,
 239                                         rWriteData.ulDataLength,
 240                                         rWriteData.usDspAddress);
 241                 }
 242                         break;
 243
 244                 case IOCTL_MW_WRITE_INST: {
 245                         MW_READWRITE rWriteData;
 246                         unsigned short __user *pusBuffer = NULL;
 247
 248                         if( copy_from_user(&rWriteData, arg,
 249                                                 sizeof(MW_READWRITE)) )
 250                                 return -EFAULT;
 251                         pusBuffer = (unsigned short __user *)(rWriteData.pBuf);
 252
 253                         PRINTK_4(TRACE_MWAVE,
 254                                 "mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST,"
 255                                 " size %lx, ioarg %lx pusBuffer %p\n",
 256                                 rWriteData.ulDataLength, ioarg,
 257                                 pusBuffer);
 258                         retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
 259                                         iocmd, pusBuffer,
 260                                         rWriteData.ulDataLength,
 261                                         rWriteData.usDspAddress);
 262                 }
 263                         break;
 264
 265                 case IOCTL_MW_REGISTER_IPC: {
 266                         unsigned int ipcnum = (unsigned int) ioarg;
 267
 268                         PRINTK_3(TRACE_MWAVE,
 269                                 "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
 270                                 " ipcnum %x entry usIntCount %x\n",
 271                                 ipcnum,
 272                                 pDrvData->IPCs[ipcnum].usIntCount);
 273
 274                         if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 275                                 PRINTK_ERROR(KERN_ERR_MWAVE
 276                                                 "mwavedd::mwave_ioctl:"
 277                                                 " IOCTL_MW_REGISTER_IPC:"
 278                                                 " Error: Invalid ipcnum %x\n",
 279                                                 ipcnum);
 280                                 return -EINVAL;
 281                         }
 282                         pDrvData->IPCs[ipcnum].bIsHere = FALSE;
 283                         pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
 284
 285                         PRINTK_2(TRACE_MWAVE,
 286                                 "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
 287                                 " ipcnum %x exit\n",
 288                                 ipcnum);
 289                 }
 290                         break;
 291
 292                 case IOCTL_MW_GET_IPC: {
 293                         unsigned int ipcnum = (unsigned int) ioarg;
 294
 295                         PRINTK_3(TRACE_MWAVE,
 296                                 "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
 297                                 " ipcnum %x, usIntCount %x\n",
 298                                 ipcnum,
 299                                 pDrvData->IPCs[ipcnum].usIntCount);
 300                         if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 301                                 PRINTK_ERROR(KERN_ERR_MWAVE
 302                                                 "mwavedd::mwave_ioctl:"
 303                                                 " IOCTL_MW_GET_IPC: Error:"
 304                                                 " Invalid ipcnum %x\n", ipcnum);
 305                                 return -EINVAL;
 306                         }
 307
 308                         if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
 309                                 DECLARE_WAITQUEUE(wait, current);
 310
 311                                 PRINTK_2(TRACE_MWAVE,
 312                                         "mwavedd::mwave_ioctl, thread for"
 313                                         " ipc %x going to sleep\n",
 314                                         ipcnum);
 315                                 add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
 316                                 pDrvData->IPCs[ipcnum].bIsHere = TRUE;
 317                                 set_current_state(TASK_INTERRUPTIBLE);
 318                                 /* check whether an event was signalled by */
 319                                 /* the interrupt handler while we were gone */
 320                                 if (pDrvData->IPCs[ipcnum].usIntCount == 1) {   /* first int has occurred (race condition) */
 321                                         pDrvData->IPCs[ipcnum].usIntCount = 2;  /* first int has been handled */
 322                                         PRINTK_2(TRACE_MWAVE,
 323                                                 "mwavedd::mwave_ioctl"
 324                                                 " IOCTL_MW_GET_IPC ipcnum %x"
 325                                                 " handling first int\n",
 326                                                 ipcnum);
 327                                 } else {        /* either 1st int has not yet occurred, or we have already handled the first int */
 328                                         schedule();
 329                                         if (pDrvData->IPCs[ipcnum].usIntCount == 1) {
 330                                                 pDrvData->IPCs[ipcnum].usIntCount = 2;
 331                                         }
 332                                         PRINTK_2(TRACE_MWAVE,
 333                                                 "mwavedd::mwave_ioctl"
 334                                                 " IOCTL_MW_GET_IPC ipcnum %x"
 335                                                 " woke up and returning to"
 336                                                 " application\n",
 337                                                 ipcnum);
 338                                 }
 339                                 pDrvData->IPCs[ipcnum].bIsHere = FALSE;
 340                                 remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
 341                                 set_current_state(TASK_RUNNING);
 342                                 PRINTK_2(TRACE_MWAVE,
 343                                         "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC,"
 344                                         " returning thread for ipc %x"
 345                                         " processing\n",
 346                                         ipcnum);
 347                         }
 348                 }
 349                         break;
 350
 351                 case IOCTL_MW_UNREGISTER_IPC: {
 352                         unsigned int ipcnum = (unsigned int) ioarg;
 353
 354                         PRINTK_2(TRACE_MWAVE,
 355                                 "mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC"
 356                                 " ipcnum %x\n",
 357                                 ipcnum);
 358                         if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 359                                 PRINTK_ERROR(KERN_ERR_MWAVE
 360                                                 "mwavedd::mwave_ioctl:"
 361                                                 " IOCTL_MW_UNREGISTER_IPC:"
 362                                                 " Error: Invalid ipcnum %x\n",
 363                                                 ipcnum);
 364                                 return -EINVAL;
 365                         }
 366                         if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
 367                                 pDrvData->IPCs[ipcnum].bIsEnabled = FALSE;
 368                                 if (pDrvData->IPCs[ipcnum].bIsHere == TRUE) {
 369                                         wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
 370                                 }
 371                         }
 372                 }
 373                         break;
 374
 375                 default:
 376                         PRINTK_ERROR(KERN_ERR_MWAVE "mwavedd::mwave_ioctl:"
 377                                         " Error: Unrecognized iocmd %x\n",
 378                                         iocmd);
 379                         return -ENOTTY;
 380                         break;
 381         } /* switch */
 382
 383         PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval);
 384
 385         return retval;
 386 }
 387
 388
 389 static ssize_t mwave_read(struct file *file, char __user *buf, size_t count,
 390                           loff_t * ppos)
 391 {
 392         PRINTK_5(TRACE_MWAVE,
 393                 "mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n",
 394                 file, buf, count, ppos);
 395
 396         return -EINVAL;
 397 }
 398
 399
 400 static ssize_t mwave_write(struct file *file, const char __user *buf,
 401                            size_t count, loff_t * ppos)
 402 {
 403         PRINTK_5(TRACE_MWAVE,
 404                 "mwavedd::mwave_write entry file %p, buf %p,"
 405                 " count %zx ppos %p\n",
 406                 file, buf, count, ppos);
 407
 408         return -EINVAL;
 409 }
 410
 411
 412 static int register_serial_portandirq(unsigned int port, int irq)
 413 {
 414         struct uart_port uart;
 415
 416         switch ( port ) {
 417                 case 0x3f8:
 418                 case 0x2f8:
 419                 case 0x3e8:
 420                 case 0x2e8:
 421                         /* OK */
 422                         break;
 423                 default:
 424                         PRINTK_ERROR(KERN_ERR_MWAVE
 425                                         "mwavedd::register_serial_portandirq:"
 426                                         " Error: Illegal port %x\n", port );
 427                         return -1;
 428         } /* switch */
 429         /* port is okay */
 430
 431         switch ( irq ) {
 432                 case 3:
 433                 case 4:
 434                 case 5:
 435                 case 7:
 436                         /* OK */
 437                         break;
 438                 default:
 439                         PRINTK_ERROR(KERN_ERR_MWAVE
 440                                         "mwavedd::register_serial_portandirq:"
 441                                         " Error: Illegal irq %x\n", irq );
 442                         return -1;
 443         } /* switch */
 444         /* irq is okay */
 445
 446         memset(&uart, 0, sizeof(struct uart_port));
 447
 448         uart.uartclk =  1843200;
 449         uart.iobase = port;
 450         uart.irq = irq;
 451         uart.iotype = UPIO_PORT;
 452         uart.flags =  UPF_SHARE_IRQ;
 453         return serial8250_register_port(&uart);
 454 }
 455
 456
 457 static const struct file_operations mwave_fops = {
 458         .owner          = THIS_MODULE,
 459         .read           = mwave_read,
 460         .write          = mwave_write,
 461         .ioctl          = mwave_ioctl,
 462         .open           = mwave_open,
 463         .release        = mwave_close
 464 };
 465
 466
 467 static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops };
 468
 469 #if 0 /* totally b0rked */
 470 /*
 471  * sysfs support <paulsch@us.ibm.com>
 472  */
 473
 474 struct device mwave_device;
 475
 476 /* Prevent code redundancy, create a macro for mwave_show_* functions. */
 477 #define mwave_show_function(attr_name, format_string, field)            \
 478 static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf)     \
 479 {                                                                       \
 480         DSP_3780I_CONFIG_SETTINGS *pSettings =                          \
 481                 &mwave_s_mdd.rBDData.rDspSettings;                      \
 482         return sprintf(buf, format_string, pSettings->field);           \
 483 }
 484
 485 /* All of our attributes are read attributes. */
 486 #define mwave_dev_rd_attr(attr_name, format_string, field)              \
 487         mwave_show_function(attr_name, format_string, field)            \
 488 static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL)
 489
 490 mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma);
 491 mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq);
 492 mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO);
 493 mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq);
 494 mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO);
 495
 496 static struct device_attribute * const mwave_dev_attrs[] = {
 497         &dev_attr_3780i_dma,
 498         &dev_attr_3780i_irq,
 499         &dev_attr_3780i_io,
 500         &dev_attr_uart_irq,
 501         &dev_attr_uart_io,
 502 };
 503 #endif
 504
 505 /*
 506 * mwave_init is called on module load
 507 *
 508 * mwave_exit is called on module unload
 509 * mwave_exit is also used to clean up after an aborted mwave_init
 510 */
 511 static void mwave_exit(void)
 512 {
 513         pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
 514
 515         PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n");
 516
 517 #if 0
 518         for (i = 0; i < pDrvData->nr_registered_attrs; i++)
 519                 device_remove_file(&mwave_device, mwave_dev_attrs[i]);
 520         pDrvData->nr_registered_attrs = 0;
 521
 522         if (pDrvData->device_registered) {
 523                 device_unregister(&mwave_device);
 524                 pDrvData->device_registered = FALSE;
 525         }
 526 #endif
 527
 528         if ( pDrvData->sLine >= 0 ) {
 529                 serial8250_unregister_port(pDrvData->sLine);
 530         }
 531         if (pDrvData->bMwaveDevRegistered) {
 532                 misc_deregister(&mwave_misc_dev);
 533         }
 534         if (pDrvData->bDSPEnabled) {
 535                 tp3780I_DisableDSP(&pDrvData->rBDData);
 536         }
 537         if (pDrvData->bResourcesClaimed) {
 538                 tp3780I_ReleaseResources(&pDrvData->rBDData);
 539         }
 540         if (pDrvData->bBDInitialized) {
 541                 tp3780I_Cleanup(&pDrvData->rBDData);
 542         }
 543
 544         PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n");
 545 }
 546
 547 module_exit(mwave_exit);
 548
 549 static int __init mwave_init(void)
 550 {
 551         int i;
 552         int retval = 0;
 553         pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
 554
 555         PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n");
 556
 557         memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA));
 558
 559         pDrvData->bBDInitialized = FALSE;
 560         pDrvData->bResourcesClaimed = FALSE;
 561         pDrvData->bDSPEnabled = FALSE;
 562         pDrvData->bDSPReset = FALSE;
 563         pDrvData->bMwaveDevRegistered = FALSE;
 564         pDrvData->sLine = -1;
 565
 566         for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
 567                 pDrvData->IPCs[i].bIsEnabled = FALSE;
 568                 pDrvData->IPCs[i].bIsHere = FALSE;
 569                 pDrvData->IPCs[i].usIntCount = 0;       /* no ints received yet */
 570                 init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
 571         }
 572
 573         retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
 574         PRINTK_2(TRACE_MWAVE,
 575                 "mwavedd::mwave_init, return from tp3780I_InitializeBoardData"
 576                 " retval %x\n",
 577                 retval);
 578         if (retval) {
 579                 PRINTK_ERROR(KERN_ERR_MWAVE
 580                                 "mwavedd::mwave_init: Error:"
 581                                 " Failed to initialize board data\n");
 582                 goto cleanup_error;
 583         }
 584         pDrvData->bBDInitialized = TRUE;
 585
 586         retval = tp3780I_CalcResources(&pDrvData->rBDData);
 587         PRINTK_2(TRACE_MWAVE,
 588                 "mwavedd::mwave_init, return from tp3780I_CalcResources"
 589                 " retval %x\n",
 590                 retval);
 591         if (retval) {
 592                 PRINTK_ERROR(KERN_ERR_MWAVE
 593                                 "mwavedd:mwave_init: Error:"
 594                                 " Failed to calculate resources\n");
 595                 goto cleanup_error;
 596         }
 597
 598         retval = tp3780I_ClaimResources(&pDrvData->rBDData);
 599         PRINTK_2(TRACE_MWAVE,
 600                 "mwavedd::mwave_init, return from tp3780I_ClaimResources"
 601                 " retval %x\n",
 602                 retval);
 603         if (retval) {
 604                 PRINTK_ERROR(KERN_ERR_MWAVE
 605                                 "mwavedd:mwave_init: Error:"
 606                                 " Failed to claim resources\n");
 607                 goto cleanup_error;
 608         }
 609         pDrvData->bResourcesClaimed = TRUE;
 610
 611         retval = tp3780I_EnableDSP(&pDrvData->rBDData);
 612         PRINTK_2(TRACE_MWAVE,
 613                 "mwavedd::mwave_init, return from tp3780I_EnableDSP"
 614                 " retval %x\n",
 615                 retval);
 616         if (retval) {
 617                 PRINTK_ERROR(KERN_ERR_MWAVE
 618                                 "mwavedd:mwave_init: Error:"
 619                                 " Failed to enable DSP\n");
 620                 goto cleanup_error;
 621         }
 622         pDrvData->bDSPEnabled = TRUE;
 623
 624         if (misc_register(&mwave_misc_dev) < 0) {
 625                 PRINTK_ERROR(KERN_ERR_MWAVE
 626                                 "mwavedd:mwave_init: Error:"
 627                                 " Failed to register misc device\n");
 628                 goto cleanup_error;
 629         }
 630         pDrvData->bMwaveDevRegistered = TRUE;
 631
 632         pDrvData->sLine = register_serial_portandirq(
 633                 pDrvData->rBDData.rDspSettings.usUartBaseIO,
 634                 pDrvData->rBDData.rDspSettings.usUartIrq
 635         );
 636         if (pDrvData->sLine < 0) {
 637                 PRINTK_ERROR(KERN_ERR_MWAVE
 638                                 "mwavedd:mwave_init: Error:"
 639                                 " Failed to register serial driver\n");
 640                 goto cleanup_error;
 641         }
 642         /* uart is registered */
 643
 644 #if 0
 645         /* sysfs */
 646         memset(&mwave_device, 0, sizeof (struct device));
 647         snprintf(mwave_device.bus_id, BUS_ID_SIZE, "mwave");
 648
 649         if (device_register(&mwave_device))
 650                 goto cleanup_error;
 651         pDrvData->device_registered = TRUE;
 652         for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) {
 653                 if(device_create_file(&mwave_device, mwave_dev_attrs[i])) {
 654                         PRINTK_ERROR(KERN_ERR_MWAVE
 655                                         "mwavedd:mwave_init: Error:"
 656                                         " Failed to create sysfs file %s\n",
 657                                         mwave_dev_attrs[i]->attr.name);
 658                         goto cleanup_error;
 659                 }
 660                 pDrvData->nr_registered_attrs++;
 661         }
 662 #endif
 663
 664         /* SUCCESS! */
 665         return 0;
 666
 667 cleanup_error:
 668         PRINTK_ERROR(KERN_ERR_MWAVE
 669                         "mwavedd::mwave_init: Error:"
 670                         " Failed to initialize\n");
 671         mwave_exit(); /* clean up */
 672
 673         return -EIO;
 674 }
 675
 676 module_init(mwave_init);
 677