2 * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
4 * Copyright (C) 2000-2002 Lineo
5 * by Stuart Lynne, Tom Rushworth, and Bruce Balden
6 * Copyright (C) 2002 Toshiba Corporation
7 * Copyright (C) 2003 MontaVista Software (source@mvista.com)
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
15 * This device has ep0 and three semi-configurable bulk/interrupt endpoints.
17 * - Endpoint numbering is fixed: ep{1,2,3}-bulk
18 * - Gadget drivers can choose ep maxpacket (8/16/32/64)
19 * - Gadget drivers can choose direction (IN, OUT)
20 * - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
24 // #define VERBOSE /* extra debug messages (success too) */
25 // #define USB_TRACE /* packet-level success messages */
27 #include <linux/config.h>
28 #include <linux/kernel.h>
29 #include <linux/module.h>
30 #include <linux/pci.h>
31 #include <linux/delay.h>
32 #include <linux/ioport.h>
33 #include <linux/sched.h>
34 #include <linux/slab.h>
35 #include <linux/smp_lock.h>
36 #include <linux/errno.h>
37 #include <linux/init.h>
38 #include <linux/timer.h>
39 #include <linux/list.h>
40 #include <linux/interrupt.h>
41 #include <linux/proc_fs.h>
42 #include <linux/device.h>
43 #include <linux/usb_ch9.h>
44 #include <linux/usb_gadget.h>
46 #include <asm/byteorder.h>
49 #include <asm/system.h>
50 #include <asm/unaligned.h>
55 #define DRIVER_DESC "TC86C001 USB Device Controller"
56 #define DRIVER_VERSION "30-Oct 2003"
58 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
60 static const char driver_name [] = "goku_udc";
61 static const char driver_desc [] = DRIVER_DESC;
63 MODULE_AUTHOR("source@mvista.com");
64 MODULE_DESCRIPTION(DRIVER_DESC);
65 MODULE_LICENSE("GPL");
69 * IN dma behaves ok under testing, though the IN-dma abort paths don't
70 * seem to behave quite as expected. Used by default.
72 * OUT dma documents design problems handling the common "short packet"
73 * transfer termination policy; it couldn't be enabled by default, even
74 * if the OUT-dma abort problems had a resolution.
76 static unsigned use_dma = 1;
79 //#include <linux/moduleparam.h>
80 /* "modprobe goku_udc use_dma=1" etc
82 * 1 to use IN dma only (normal operation)
83 * 2 to use IN and OUT dma
85 module_param(use_dma, uint, S_IRUGO);
88 /*-------------------------------------------------------------------------*/
90 static void nuke(struct goku_ep *, int status);
93 command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum)
95 writel(COMMAND_EP(epnum) | command, ®s->Command);
100 goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
102 struct goku_udc *dev;
108 ep = container_of(_ep, struct goku_ep, ep);
109 if (!_ep || !desc || ep->desc
110 || desc->bDescriptorType != USB_DT_ENDPOINT)
113 if (ep == &dev->ep[0])
115 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
117 if (ep->num != (desc->bEndpointAddress & 0x0f))
120 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
121 case USB_ENDPOINT_XFER_BULK:
122 case USB_ENDPOINT_XFER_INT:
128 if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK)
129 != EPxSTATUS_EP_INVALID)
132 /* enabling the no-toggle interrupt mode would need an api hook */
134 max = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
144 mode |= 2 << 1; /* bulk, or intr-with-toggle */
146 /* ep1/ep2 dma direction is chosen early; it works in the other
147 * direction, with pio. be cautious with out-dma.
149 ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
152 ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
154 ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT);
156 DBG(dev, "%s out-dma hides short packets\n",
160 spin_lock_irqsave(&ep->dev->lock, flags);
162 /* ep1 and ep2 can do double buffering and/or dma */
164 struct goku_udc_regs __iomem *regs = ep->dev->regs;
167 /* double buffer except (for now) with pio in */
168 tmp = ((ep->dma || !ep->is_in)
169 ? 0x10 /* double buffered */
170 : 0x11 /* single buffer */
172 tmp |= readl(®s->EPxSingle);
173 writel(tmp, ®s->EPxSingle);
175 tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num;
176 tmp |= readl(®s->EPxBCS);
177 writel(tmp, ®s->EPxBCS);
179 writel(mode, ep->reg_mode);
180 command(ep->dev->regs, COMMAND_RESET, ep->num);
181 ep->ep.maxpacket = max;
184 spin_unlock_irqrestore(&ep->dev->lock, flags);
186 DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
187 ep->is_in ? "IN" : "OUT",
188 ep->dma ? "dma" : "pio",
194 static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
196 struct goku_udc *dev = ep->dev;
199 command(regs, COMMAND_INVALID, ep->num);
201 if (ep->num == UDC_MSTWR_ENDPOINT)
202 dev->int_enable &= ~(INT_MSTWREND
204 else if (ep->num == UDC_MSTRD_ENDPOINT)
205 dev->int_enable &= ~INT_MSTRDEND;
206 dev->int_enable &= ~INT_EPxDATASET (ep->num);
208 dev->int_enable &= ~INT_EP0;
209 writel(dev->int_enable, ®s->int_enable);
210 readl(®s->int_enable);
212 struct goku_udc_regs __iomem *r = ep->dev->regs;
215 tmp = readl(&r->EPxSingle);
216 tmp &= ~(0x11 << ep->num);
217 writel(tmp, &r->EPxSingle);
219 tmp = readl(&r->EPxBCS);
220 tmp &= ~(0x11 << ep->num);
221 writel(tmp, &r->EPxBCS);
223 /* reset dma in case we're still using it */
227 master = readl(®s->dma_master) & MST_RW_BITS;
228 if (ep->num == UDC_MSTWR_ENDPOINT) {
229 master &= ~MST_W_BITS;
230 master |= MST_WR_RESET;
232 master &= ~MST_R_BITS;
233 master |= MST_RD_RESET;
235 writel(master, ®s->dma_master);
239 ep->ep.maxpacket = MAX_FIFO_SIZE;
246 static int goku_ep_disable(struct usb_ep *_ep)
249 struct goku_udc *dev;
252 ep = container_of(_ep, struct goku_ep, ep);
253 if (!_ep || !ep->desc)
256 if (dev->ep0state == EP0_SUSPEND)
259 VDBG(dev, "disable %s\n", _ep->name);
261 spin_lock_irqsave(&dev->lock, flags);
262 nuke(ep, -ESHUTDOWN);
263 ep_reset(dev->regs, ep);
264 spin_unlock_irqrestore(&dev->lock, flags);
269 /*-------------------------------------------------------------------------*/
271 static struct usb_request *
272 goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
274 struct goku_request *req;
278 req = kmalloc(sizeof *req, gfp_flags);
282 memset(req, 0, sizeof *req);
283 req->req.dma = DMA_ADDR_INVALID;
284 INIT_LIST_HEAD(&req->queue);
289 goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
291 struct goku_request *req;
296 req = container_of(_req, struct goku_request, req);
297 WARN_ON(!list_empty(&req->queue));
301 /*-------------------------------------------------------------------------*/
305 /* many common platforms have dma-coherent caches, which means that it's
306 * safe to use kmalloc() memory for all i/o buffers without using any
307 * cache flushing calls. (unless you're trying to share cache lines
308 * between dma and non-dma activities, which is a slow idea in any case.)
310 * other platforms need more care, with 2.6 having a moderately general
311 * solution except for the common "buffer is smaller than a page" case.
313 #if defined(CONFIG_X86)
316 #elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
319 #elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
324 /* allocating buffers this way eliminates dma mapping overhead, which
325 * on some platforms will mean eliminating a per-io buffer copy. with
326 * some kinds of system caches, further tweaks may still be needed.
329 goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
330 dma_addr_t *dma, gfp_t gfp_flags)
335 ep = container_of(_ep, struct goku_ep, ep);
338 *dma = DMA_ADDR_INVALID;
340 #if defined(USE_KMALLOC)
341 retval = kmalloc(bytes, gfp_flags);
343 *dma = virt_to_phys(retval);
346 /* the main problem with this call is that it wastes memory
347 * on typical 1/N page allocations: it allocates 1-N pages.
349 #warning Using dma_alloc_coherent even with buffers smaller than a page.
350 retval = dma_alloc_coherent(&ep->dev->pdev->dev,
351 bytes, dma, gfp_flags);
353 retval = kmalloc(bytes, gfp_flags);
359 goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
361 /* free memory into the right allocator */
363 if (dma != DMA_ADDR_INVALID) {
366 ep = container_of(_ep, struct goku_ep, ep);
369 dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
375 /*-------------------------------------------------------------------------*/
378 done(struct goku_ep *ep, struct goku_request *req, int status)
380 struct goku_udc *dev;
381 unsigned stopped = ep->stopped;
383 list_del_init(&req->queue);
385 if (likely(req->req.status == -EINPROGRESS))
386 req->req.status = status;
388 status = req->req.status;
392 pci_unmap_single(dev->pdev, req->req.dma, req->req.length,
393 ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
394 req->req.dma = DMA_ADDR_INVALID;
399 if (status && status != -ESHUTDOWN)
401 VDBG(dev, "complete %s req %p stat %d len %u/%u\n",
402 ep->ep.name, &req->req, status,
403 req->req.actual, req->req.length);
405 /* don't modify queue heads during completion callback */
407 spin_unlock(&dev->lock);
408 req->req.complete(&ep->ep, &req->req);
409 spin_lock(&dev->lock);
410 ep->stopped = stopped;
413 /*-------------------------------------------------------------------------*/
416 write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max)
418 unsigned length, count;
420 length = min(req->req.length - req->req.actual, max);
421 req->req.actual += length;
424 while (likely(count--))
425 writel(*buf++, fifo);
429 // return: 0 = still running, 1 = completed, negative = errno
430 static int write_fifo(struct goku_ep *ep, struct goku_request *req)
432 struct goku_udc *dev = ep->dev;
438 tmp = readl(&dev->regs->DataSet);
439 buf = req->req.buf + req->req.actual;
443 if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN))
446 /* NOTE: just single-buffered PIO-IN for now. */
447 if (unlikely((tmp & DATASET_A(ep->num)) != 0))
450 /* clear our "packet available" irq */
452 writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status);
454 count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket);
456 /* last packet often short (sometimes a zlp, especially on ep0) */
457 if (unlikely(count != ep->ep.maxpacket)) {
458 writel(~(1<<ep->num), &dev->regs->EOP);
460 dev->ep[0].stopped = 1;
461 dev->ep0state = EP0_STATUS;
465 if (likely(req->req.length != req->req.actual)
471 #if 0 /* printk seemed to trash is_last...*/
473 VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n",
474 ep->ep.name, count, is_last ? "/last" : "",
475 req->req.length - req->req.actual, req);
478 /* requests complete when all IN data is in the FIFO,
479 * or sometimes later, if a zlp was needed.
489 static int read_fifo(struct goku_ep *ep, struct goku_request *req)
491 struct goku_udc_regs __iomem *regs;
494 unsigned bufferspace, is_short, dbuff;
496 regs = ep->dev->regs;
498 buf = req->req.buf + req->req.actual;
501 if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT))
504 dbuff = (ep->num == 1 || ep->num == 2);
506 /* ack dataset irq matching the status we'll handle */
508 writel(~INT_EPxDATASET(ep->num), ®s->int_status);
510 set = readl(®s->DataSet) & DATASET_AB(ep->num);
511 size = readl(®s->EPxSizeLA[ep->num]);
512 bufferspace = req->req.length - req->req.actual;
514 /* usually do nothing without an OUT packet */
515 if (likely(ep->num != 0 || bufferspace != 0)) {
516 if (unlikely(set == 0))
518 /* use ep1/ep2 double-buffering for OUT */
519 if (!(size & PACKET_ACTIVE))
520 size = readl(®s->EPxSizeLB[ep->num]);
521 if (!(size & PACKET_ACTIVE)) // "can't happen"
523 size &= DATASIZE; /* EPxSizeH == 0 */
525 /* ep0out no-out-data case for set_config, etc */
529 /* read all bytes from this packet */
530 req->req.actual += size;
531 is_short = (size < ep->ep.maxpacket);
533 VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n",
534 ep->ep.name, size, is_short ? "/S" : "",
535 req, req->req.actual, req->req.length);
537 while (likely(size-- != 0)) {
538 u8 byte = (u8) readl(ep->reg_fifo);
540 if (unlikely(bufferspace == 0)) {
541 /* this happens when the driver's buffer
542 * is smaller than what the host sent.
543 * discard the extra data in this packet.
545 if (req->req.status != -EOVERFLOW)
546 DBG(ep->dev, "%s overflow %u\n",
548 req->req.status = -EOVERFLOW;
556 if (unlikely(is_short || req->req.actual == req->req.length)) {
557 if (unlikely(ep->num == 0)) {
558 /* non-control endpoints now usable? */
559 if (ep->dev->req_config)
560 writel(ep->dev->configured
561 ? USBSTATE_CONFIGURED
564 /* ep0out status stage */
565 writel(~(1<<0), ®s->EOP);
567 ep->dev->ep0state = EP0_STATUS;
571 /* empty the second buffer asap */
572 if (dbuff && !list_empty(&ep->queue)) {
573 req = list_entry(ep->queue.next,
574 struct goku_request, queue);
584 pio_irq_enable(struct goku_udc *dev,
585 struct goku_udc_regs __iomem *regs, int epnum)
587 dev->int_enable |= INT_EPxDATASET (epnum);
588 writel(dev->int_enable, ®s->int_enable);
589 /* write may still be posted */
593 pio_irq_disable(struct goku_udc *dev,
594 struct goku_udc_regs __iomem *regs, int epnum)
596 dev->int_enable &= ~INT_EPxDATASET (epnum);
597 writel(dev->int_enable, ®s->int_enable);
598 /* write may still be posted */
602 pio_advance(struct goku_ep *ep)
604 struct goku_request *req;
606 if (unlikely(list_empty (&ep->queue)))
608 req = list_entry(ep->queue.next, struct goku_request, queue);
609 (ep->is_in ? write_fifo : read_fifo)(ep, req);
613 /*-------------------------------------------------------------------------*/
615 // return: 0 = q running, 1 = q stopped, negative = errno
616 static int start_dma(struct goku_ep *ep, struct goku_request *req)
618 struct goku_udc_regs __iomem *regs = ep->dev->regs;
620 u32 start = req->req.dma;
621 u32 end = start + req->req.length - 1;
623 master = readl(®s->dma_master) & MST_RW_BITS;
625 /* re-init the bits affecting IN dma; careful with zlps */
626 if (likely(ep->is_in)) {
627 if (unlikely(master & MST_RD_ENA)) {
628 DBG (ep->dev, "start, IN active dma %03x!!\n",
632 writel(end, ®s->in_dma_end);
633 writel(start, ®s->in_dma_start);
635 master &= ~MST_R_BITS;
636 if (unlikely(req->req.length == 0))
637 master = MST_RD_ENA | MST_RD_EOPB;
638 else if ((req->req.length % ep->ep.maxpacket) != 0
640 master = MST_RD_ENA | MST_EOPB_ENA;
642 master = MST_RD_ENA | MST_EOPB_DIS;
644 ep->dev->int_enable |= INT_MSTRDEND;
646 /* Goku DMA-OUT merges short packets, which plays poorly with
647 * protocols where short packets mark the transfer boundaries.
648 * The chip supports a nonstandard policy with INT_MSTWRTMOUT,
649 * ending transfers after 3 SOFs; we don't turn it on.
652 if (unlikely(master & MST_WR_ENA)) {
653 DBG (ep->dev, "start, OUT active dma %03x!!\n",
657 writel(end, ®s->out_dma_end);
658 writel(start, ®s->out_dma_start);
660 master &= ~MST_W_BITS;
661 master |= MST_WR_ENA | MST_TIMEOUT_DIS;
663 ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT;
666 writel(master, ®s->dma_master);
667 writel(ep->dev->int_enable, ®s->int_enable);
671 static void dma_advance(struct goku_udc *dev, struct goku_ep *ep)
673 struct goku_request *req;
674 struct goku_udc_regs __iomem *regs = ep->dev->regs;
677 master = readl(®s->dma_master);
679 if (unlikely(list_empty(&ep->queue))) {
682 dev->int_enable &= ~INT_MSTRDEND;
684 dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT);
685 writel(dev->int_enable, ®s->int_enable);
688 req = list_entry(ep->queue.next, struct goku_request, queue);
690 /* normal hw dma completion (not abort) */
691 if (likely(ep->is_in)) {
692 if (unlikely(master & MST_RD_ENA))
694 req->req.actual = readl(®s->in_dma_current);
696 if (unlikely(master & MST_WR_ENA))
699 /* hardware merges short packets, and also hides packet
700 * overruns. a partial packet MAY be in the fifo here.
702 req->req.actual = readl(®s->out_dma_current);
704 req->req.actual -= req->req.dma;
708 VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n",
709 ep->ep.name, ep->is_in ? "IN" : "OUT",
710 req->req.actual, req->req.length, req);
713 if (list_empty(&ep->queue))
715 req = list_entry(ep->queue.next, struct goku_request, queue);
716 (void) start_dma(ep, req);
719 static void abort_dma(struct goku_ep *ep, int status)
721 struct goku_udc_regs __iomem *regs = ep->dev->regs;
722 struct goku_request *req;
725 /* NAK future host requests, hoping the implicit delay lets the
726 * dma engine finish reading (or writing) its latest packet and
727 * empty the dma buffer (up to 16 bytes).
729 * This avoids needing to clean up a partial packet in the fifo;
730 * we can't do that for IN without side effects to HALT and TOGGLE.
732 command(regs, COMMAND_FIFO_DISABLE, ep->num);
733 req = list_entry(ep->queue.next, struct goku_request, queue);
734 master = readl(®s->dma_master) & MST_RW_BITS;
736 /* FIXME using these resets isn't usably documented. this may
737 * not work unless it's followed by disabling the endpoint.
739 * FIXME the OUT reset path doesn't even behave consistently.
742 if (unlikely((readl(®s->dma_master) & MST_RD_ENA) == 0))
744 curr = readl(®s->in_dma_current);
746 writel(curr, ®s->in_dma_end);
747 writel(curr, ®s->in_dma_start);
749 master &= ~MST_R_BITS;
750 master |= MST_RD_RESET;
751 writel(master, ®s->dma_master);
753 if (readl(®s->dma_master) & MST_RD_ENA)
754 DBG(ep->dev, "IN dma active after reset!\n");
757 if (unlikely((readl(®s->dma_master) & MST_WR_ENA) == 0))
759 curr = readl(®s->out_dma_current);
761 writel(curr, ®s->out_dma_end);
762 writel(curr, ®s->out_dma_start);
764 master &= ~MST_W_BITS;
765 master |= MST_WR_RESET;
766 writel(master, ®s->dma_master);
768 if (readl(®s->dma_master) & MST_WR_ENA)
769 DBG(ep->dev, "OUT dma active after reset!\n");
771 req->req.actual = (curr - req->req.dma) + 1;
772 req->req.status = status;
774 VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name,
775 ep->is_in ? "IN" : "OUT",
776 req->req.actual, req->req.length);
778 command(regs, COMMAND_FIFO_ENABLE, ep->num);
783 /* dma already completed; no abort needed */
784 command(regs, COMMAND_FIFO_ENABLE, ep->num);
785 req->req.actual = req->req.length;
789 /*-------------------------------------------------------------------------*/
792 goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
794 struct goku_request *req;
796 struct goku_udc *dev;
800 /* always require a cpu-view buffer so pio works */
801 req = container_of(_req, struct goku_request, req);
802 if (unlikely(!_req || !_req->complete
803 || !_req->buf || !list_empty(&req->queue)))
805 ep = container_of(_ep, struct goku_ep, ep);
806 if (unlikely(!_ep || (!ep->desc && ep->num != 0)))
809 if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
812 /* can't touch registers when suspended */
813 if (dev->ep0state == EP0_SUSPEND)
816 /* set up dma mapping in case the caller didn't */
817 if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
818 _req->dma = pci_map_single(dev->pdev, _req->buf, _req->length,
819 ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
824 VDBG(dev, "%s queue req %p, len %u buf %p\n",
825 _ep->name, _req, _req->length, _req->buf);
828 spin_lock_irqsave(&dev->lock, flags);
830 _req->status = -EINPROGRESS;
833 /* for ep0 IN without premature status, zlp is required and
834 * writing EOP starts the status stage (OUT).
836 if (unlikely(ep->num == 0 && ep->is_in))
839 /* kickstart this i/o queue? */
841 if (list_empty(&ep->queue) && likely(!ep->stopped)) {
842 /* dma: done after dma completion IRQ (or error)
843 * pio: done after last fifo operation
846 status = start_dma(ep, req);
848 status = (ep->is_in ? write_fifo : read_fifo)(ep, req);
850 if (unlikely(status != 0)) {
856 } /* else pio or dma irq handler advances the queue. */
858 if (likely(req != 0))
859 list_add_tail(&req->queue, &ep->queue);
861 if (likely(!list_empty(&ep->queue))
862 && likely(ep->num != 0)
864 && !(dev->int_enable & INT_EPxDATASET (ep->num)))
865 pio_irq_enable(dev, dev->regs, ep->num);
867 spin_unlock_irqrestore(&dev->lock, flags);
869 /* pci writes may still be posted */
873 /* dequeue ALL requests */
874 static void nuke(struct goku_ep *ep, int status)
876 struct goku_request *req;
879 if (list_empty(&ep->queue))
882 abort_dma(ep, status);
883 while (!list_empty(&ep->queue)) {
884 req = list_entry(ep->queue.next, struct goku_request, queue);
885 done(ep, req, status);
889 /* dequeue JUST ONE request */
890 static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
892 struct goku_request *req;
894 struct goku_udc *dev;
897 ep = container_of(_ep, struct goku_ep, ep);
898 if (!_ep || !_req || (!ep->desc && ep->num != 0))
904 /* we can't touch (dma) registers when suspended */
905 if (dev->ep0state == EP0_SUSPEND)
908 VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name,
909 ep->is_in ? "IN" : "OUT",
910 ep->dma ? "dma" : "pio",
913 spin_lock_irqsave(&dev->lock, flags);
915 /* make sure it's actually queued on this endpoint */
916 list_for_each_entry (req, &ep->queue, queue) {
917 if (&req->req == _req)
920 if (&req->req != _req) {
921 spin_unlock_irqrestore (&dev->lock, flags);
925 if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) {
926 abort_dma(ep, -ECONNRESET);
927 done(ep, req, -ECONNRESET);
928 dma_advance(dev, ep);
929 } else if (!list_empty(&req->queue))
930 done(ep, req, -ECONNRESET);
933 spin_unlock_irqrestore(&dev->lock, flags);
935 return req ? 0 : -EOPNOTSUPP;
938 /*-------------------------------------------------------------------------*/
940 static void goku_clear_halt(struct goku_ep *ep)
942 // assert (ep->num !=0)
943 VDBG(ep->dev, "%s clear halt\n", ep->ep.name);
944 command(ep->dev->regs, COMMAND_SETDATA0, ep->num);
945 command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num);
949 struct goku_request *req;
951 if (list_empty(&ep->queue))
953 req = list_entry(ep->queue.next, struct goku_request,
955 (void) start_dma(ep, req);
961 static int goku_set_halt(struct usb_ep *_ep, int value)
969 ep = container_of (_ep, struct goku_ep, ep);
973 ep->dev->ep0state = EP0_STALL;
974 ep->dev->ep[0].stopped = 1;
978 /* don't change EPxSTATUS_EP_INVALID to READY */
979 } else if (!ep->desc) {
980 DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
984 spin_lock_irqsave(&ep->dev->lock, flags);
985 if (!list_empty(&ep->queue))
987 else if (ep->is_in && value
988 /* data in (either) packet buffer? */
989 && (readl(&ep->dev->regs->DataSet)
990 & DATASET_AB(ep->num)))
996 VDBG(ep->dev, "%s set halt\n", ep->ep.name);
997 command(ep->dev->regs, COMMAND_STALL, ep->num);
998 readl(ep->reg_status);
1000 spin_unlock_irqrestore(&ep->dev->lock, flags);
1004 static int goku_fifo_status(struct usb_ep *_ep)
1007 struct goku_udc_regs __iomem *regs;
1012 ep = container_of(_ep, struct goku_ep, ep);
1014 /* size is only reported sanely for OUT */
1018 /* ignores 16-byte dma buffer; SizeH == 0 */
1019 regs = ep->dev->regs;
1020 size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE;
1021 size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE;
1022 VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size);
1026 static void goku_fifo_flush(struct usb_ep *_ep)
1029 struct goku_udc_regs __iomem *regs;
1034 ep = container_of(_ep, struct goku_ep, ep);
1035 VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name);
1037 /* don't change EPxSTATUS_EP_INVALID to READY */
1038 if (!ep->desc && ep->num != 0) {
1039 DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
1043 regs = ep->dev->regs;
1044 size = readl(®s->EPxSizeLA[ep->num]);
1047 /* Non-desirable behavior: FIFO_CLEAR also clears the
1048 * endpoint halt feature. For OUT, we _could_ just read
1049 * the bytes out (PIO, if !ep->dma); for in, no choice.
1052 command(regs, COMMAND_FIFO_CLEAR, ep->num);
1055 static struct usb_ep_ops goku_ep_ops = {
1056 .enable = goku_ep_enable,
1057 .disable = goku_ep_disable,
1059 .alloc_request = goku_alloc_request,
1060 .free_request = goku_free_request,
1062 .alloc_buffer = goku_alloc_buffer,
1063 .free_buffer = goku_free_buffer,
1065 .queue = goku_queue,
1066 .dequeue = goku_dequeue,
1068 .set_halt = goku_set_halt,
1069 .fifo_status = goku_fifo_status,
1070 .fifo_flush = goku_fifo_flush,
1073 /*-------------------------------------------------------------------------*/
1075 static int goku_get_frame(struct usb_gadget *_gadget)
1080 static const struct usb_gadget_ops goku_ops = {
1081 .get_frame = goku_get_frame,
1086 /*-------------------------------------------------------------------------*/
1088 static inline char *dmastr(void)
1091 return "(dma disabled)";
1092 else if (use_dma == 2)
1093 return "(dma IN and OUT)";
1098 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1100 static const char proc_node_name [] = "driver/udc";
1102 #define FOURBITS "%s%s%s%s"
1103 #define EIGHTBITS FOURBITS FOURBITS
1106 dump_intmask(const char *label, u32 mask, char **next, unsigned *size)
1110 /* int_status is the same format ... */
1111 t = scnprintf(*next, *size,
1112 "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
1114 (mask & INT_PWRDETECT) ? " power" : "",
1115 (mask & INT_SYSERROR) ? " sys" : "",
1116 (mask & INT_MSTRDEND) ? " in-dma" : "",
1117 (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
1119 (mask & INT_MSTWREND) ? " out-dma" : "",
1120 (mask & INT_MSTWRSET) ? " wrset" : "",
1121 (mask & INT_ERR) ? " err" : "",
1122 (mask & INT_SOF) ? " sof" : "",
1124 (mask & INT_EP3NAK) ? " ep3nak" : "",
1125 (mask & INT_EP2NAK) ? " ep2nak" : "",
1126 (mask & INT_EP1NAK) ? " ep1nak" : "",
1127 (mask & INT_EP3DATASET) ? " ep3" : "",
1129 (mask & INT_EP2DATASET) ? " ep2" : "",
1130 (mask & INT_EP1DATASET) ? " ep1" : "",
1131 (mask & INT_STATUSNAK) ? " ep0snak" : "",
1132 (mask & INT_STATUS) ? " ep0status" : "",
1134 (mask & INT_SETUP) ? " setup" : "",
1135 (mask & INT_ENDPOINT0) ? " ep0" : "",
1136 (mask & INT_USBRESET) ? " reset" : "",
1137 (mask & INT_SUSPEND) ? " suspend" : "");
1144 udc_proc_read(char *buffer, char **start, off_t off, int count,
1145 int *eof, void *_dev)
1148 struct goku_udc *dev = _dev;
1149 struct goku_udc_regs __iomem *regs = dev->regs;
1151 unsigned size = count;
1152 unsigned long flags;
1153 int i, t, is_usb_connected;
1159 local_irq_save(flags);
1161 /* basic device status */
1162 tmp = readl(®s->power_detect);
1163 is_usb_connected = tmp & PW_DETECT;
1164 t = scnprintf(next, size,
1166 "%s version: %s %s\n"
1167 "Gadget driver: %s\n"
1170 pci_name(dev->pdev), driver_desc,
1171 driver_name, DRIVER_VERSION, dmastr(),
1172 dev->driver ? dev->driver->driver.name : "(none)",
1174 ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
1177 switch(dev->ep0state){
1178 case EP0_DISCONNECT: tmp = "ep0_disconnect"; break;
1179 case EP0_IDLE: tmp = "ep0_idle"; break;
1180 case EP0_IN: tmp = "ep0_in"; break;
1181 case EP0_OUT: tmp = "ep0_out"; break;
1182 case EP0_STATUS: tmp = "ep0_status"; break;
1183 case EP0_STALL: tmp = "ep0_stall"; break;
1184 case EP0_SUSPEND: tmp = "ep0_suspend"; break;
1185 default: tmp = "ep0_?"; break;
1191 dump_intmask("int_status", readl(®s->int_status), &next, &size);
1192 dump_intmask("int_enable", readl(®s->int_enable), &next, &size);
1194 if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0)
1197 /* registers for (active) device and ep0 */
1198 t = scnprintf(next, size, "\nirqs %lu\ndataset %02x "
1199 "single.bcs %02x.%02x state %x addr %u\n",
1200 dev->irqs, readl(®s->DataSet),
1201 readl(®s->EPxSingle), readl(®s->EPxBCS),
1202 readl(®s->UsbState),
1203 readl(®s->address));
1207 tmp = readl(®s->dma_master);
1208 t = scnprintf(next, size,
1209 "dma %03X =" EIGHTBITS "%s %s\n", tmp,
1210 (tmp & MST_EOPB_DIS) ? " eopb-" : "",
1211 (tmp & MST_EOPB_ENA) ? " eopb+" : "",
1212 (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
1213 (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
1215 (tmp & MST_RD_EOPB) ? " eopb" : "",
1216 (tmp & MST_RD_RESET) ? " in_reset" : "",
1217 (tmp & MST_WR_RESET) ? " out_reset" : "",
1218 (tmp & MST_RD_ENA) ? " IN" : "",
1220 (tmp & MST_WR_ENA) ? " OUT" : "",
1221 (tmp & MST_CONNECTION)
1227 /* dump endpoint queues */
1228 for (i = 0; i < 4; i++) {
1229 struct goku_ep *ep = &dev->ep [i];
1230 struct goku_request *req;
1236 tmp = readl(ep->reg_status);
1237 t = scnprintf(next, size,
1238 "%s %s max %u %s, irqs %lu, "
1239 "status %02x (%s) " FOURBITS "\n",
1241 ep->is_in ? "in" : "out",
1243 ep->dma ? "dma" : "pio",
1246 switch (tmp & EPxSTATUS_EP_MASK) {
1247 case EPxSTATUS_EP_READY:
1249 case EPxSTATUS_EP_DATAIN:
1250 s = "packet"; break;
1251 case EPxSTATUS_EP_FULL:
1253 case EPxSTATUS_EP_TX_ERR: // host will retry
1254 s = "tx_err"; break;
1255 case EPxSTATUS_EP_RX_ERR:
1256 s = "rx_err"; break;
1257 case EPxSTATUS_EP_BUSY: /* ep0 only */
1259 case EPxSTATUS_EP_STALL:
1261 case EPxSTATUS_EP_INVALID: // these "can't happen"
1262 s = "invalid"; break;
1266 (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
1267 (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
1268 (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
1269 (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""
1271 if (t <= 0 || t > size)
1276 if (list_empty(&ep->queue)) {
1277 t = scnprintf(next, size, "\t(nothing queued)\n");
1278 if (t <= 0 || t > size)
1284 list_for_each_entry(req, &ep->queue, queue) {
1285 if (ep->dma && req->queue.prev == &ep->queue) {
1286 if (i == UDC_MSTRD_ENDPOINT)
1287 tmp = readl(®s->in_dma_current);
1289 tmp = readl(®s->out_dma_current);
1290 tmp -= req->req.dma;
1293 tmp = req->req.actual;
1295 t = scnprintf(next, size,
1296 "\treq %p len %u/%u buf %p\n",
1297 &req->req, tmp, req->req.length,
1299 if (t <= 0 || t > size)
1307 local_irq_restore(flags);
1309 return count - size;
1312 #endif /* CONFIG_USB_GADGET_DEBUG_FILES */
1314 /*-------------------------------------------------------------------------*/
1316 static void udc_reinit (struct goku_udc *dev)
1318 static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };
1322 INIT_LIST_HEAD (&dev->gadget.ep_list);
1323 dev->gadget.ep0 = &dev->ep [0].ep;
1324 dev->gadget.speed = USB_SPEED_UNKNOWN;
1325 dev->ep0state = EP0_DISCONNECT;
1328 for (i = 0; i < 4; i++) {
1329 struct goku_ep *ep = &dev->ep[i];
1332 ep->ep.name = names[i];
1333 ep->reg_fifo = &dev->regs->ep_fifo [i];
1334 ep->reg_status = &dev->regs->ep_status [i];
1335 ep->reg_mode = &dev->regs->ep_mode[i];
1337 ep->ep.ops = &goku_ep_ops;
1338 list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
1340 INIT_LIST_HEAD (&ep->queue);
1345 dev->ep[0].reg_mode = NULL;
1346 dev->ep[0].ep.maxpacket = MAX_EP0_SIZE;
1347 list_del_init (&dev->ep[0].ep.ep_list);
1350 static void udc_reset(struct goku_udc *dev)
1352 struct goku_udc_regs __iomem *regs = dev->regs;
1354 writel(0, ®s->power_detect);
1355 writel(0, ®s->int_enable);
1356 readl(®s->int_enable);
1357 dev->int_enable = 0;
1359 /* deassert reset, leave USB D+ at hi-Z (no pullup)
1360 * don't let INT_PWRDETECT sequence begin
1363 writel(PW_RESETB, ®s->power_detect);
1364 readl(®s->int_enable);
1367 static void ep0_start(struct goku_udc *dev)
1369 struct goku_udc_regs __iomem *regs = dev->regs;
1372 VDBG(dev, "%s\n", __FUNCTION__);
1376 //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, ®s->dma_master);
1378 /* hw handles set_address, set_feature, get_status; maybe more */
1379 writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF
1380 | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF
1381 | G_REQMODE_GET_DESC
1382 | G_REQMODE_CLEAR_FEAT
1385 for (i = 0; i < 4; i++)
1386 dev->ep[i].irqs = 0;
1388 /* can't modify descriptors after writing UsbReady */
1389 for (i = 0; i < DESC_LEN; i++)
1390 writel(0, ®s->descriptors[i]);
1391 writel(0, ®s->UsbReady);
1393 /* expect ep0 requests when the host drops reset */
1394 writel(PW_RESETB | PW_PULLUP, ®s->power_detect);
1395 dev->int_enable = INT_DEVWIDE | INT_EP0;
1396 writel(dev->int_enable, &dev->regs->int_enable);
1397 readl(®s->int_enable);
1398 dev->gadget.speed = USB_SPEED_FULL;
1399 dev->ep0state = EP0_IDLE;
1402 static void udc_enable(struct goku_udc *dev)
1404 /* start enumeration now, or after power detect irq */
1405 if (readl(&dev->regs->power_detect) & PW_DETECT)
1408 DBG(dev, "%s\n", __FUNCTION__);
1409 dev->int_enable = INT_PWRDETECT;
1410 writel(dev->int_enable, &dev->regs->int_enable);
1414 /*-------------------------------------------------------------------------*/
1416 /* keeping it simple:
1417 * - one bus driver, initted first;
1418 * - one function driver, initted second
1421 static struct goku_udc *the_controller;
1423 /* when a driver is successfully registered, it will receive
1424 * control requests including set_configuration(), which enables
1425 * non-control requests. then usb traffic follows until a
1426 * disconnect is reported. then a host may connect again, or
1427 * the driver might get unbound.
1429 int usb_gadget_register_driver(struct usb_gadget_driver *driver)
1431 struct goku_udc *dev = the_controller;
1435 || driver->speed != USB_SPEED_FULL
1438 || !driver->disconnect
1446 /* hook up the driver */
1447 driver->driver.bus = NULL;
1448 dev->driver = driver;
1449 dev->gadget.dev.driver = &driver->driver;
1450 retval = driver->bind(&dev->gadget);
1452 DBG(dev, "bind to driver %s --> error %d\n",
1453 driver->driver.name, retval);
1455 dev->gadget.dev.driver = NULL;
1459 /* then enable host detection and ep0; and we're ready
1460 * for set_configuration as well as eventual disconnect.
1464 DBG(dev, "registered gadget driver '%s'\n", driver->driver.name);
1467 EXPORT_SYMBOL(usb_gadget_register_driver);
1470 stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
1474 DBG (dev, "%s\n", __FUNCTION__);
1476 if (dev->gadget.speed == USB_SPEED_UNKNOWN)
1479 /* disconnect gadget driver after quiesceing hw and the driver */
1481 for (i = 0; i < 4; i++)
1482 nuke(&dev->ep [i], -ESHUTDOWN);
1484 spin_unlock(&dev->lock);
1485 driver->disconnect(&dev->gadget);
1486 spin_lock(&dev->lock);
1493 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
1495 struct goku_udc *dev = the_controller;
1496 unsigned long flags;
1500 if (!driver || driver != dev->driver)
1503 spin_lock_irqsave(&dev->lock, flags);
1505 stop_activity(dev, driver);
1506 spin_unlock_irqrestore(&dev->lock, flags);
1508 driver->unbind(&dev->gadget);
1510 DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
1513 EXPORT_SYMBOL(usb_gadget_unregister_driver);
1516 /*-------------------------------------------------------------------------*/
1518 static void ep0_setup(struct goku_udc *dev)
1520 struct goku_udc_regs __iomem *regs = dev->regs;
1521 struct usb_ctrlrequest ctrl;
1524 /* read SETUP packet and enter DATA stage */
1525 ctrl.bRequestType = readl(®s->bRequestType);
1526 ctrl.bRequest = readl(®s->bRequest);
1527 ctrl.wValue = cpu_to_le16((readl(®s->wValueH) << 8)
1528 | readl(®s->wValueL));
1529 ctrl.wIndex = cpu_to_le16((readl(®s->wIndexH) << 8)
1530 | readl(®s->wIndexL));
1531 ctrl.wLength = cpu_to_le16((readl(®s->wLengthH) << 8)
1532 | readl(®s->wLengthL));
1533 writel(0, ®s->SetupRecv);
1535 nuke(&dev->ep[0], 0);
1536 dev->ep[0].stopped = 0;
1537 if (likely(ctrl.bRequestType & USB_DIR_IN)) {
1538 dev->ep[0].is_in = 1;
1539 dev->ep0state = EP0_IN;
1540 /* detect early status stages */
1541 writel(ICONTROL_STATUSNAK, &dev->regs->IntControl);
1543 dev->ep[0].is_in = 0;
1544 dev->ep0state = EP0_OUT;
1546 /* NOTE: CLEAR_FEATURE is done in software so that we can
1547 * synchronize transfer restarts after bulk IN stalls. data
1548 * won't even enter the fifo until the halt is cleared.
1550 switch (ctrl.bRequest) {
1551 case USB_REQ_CLEAR_FEATURE:
1552 switch (ctrl.bRequestType) {
1553 case USB_RECIP_ENDPOINT:
1554 tmp = le16_to_cpu(ctrl.wIndex) & 0x0f;
1555 /* active endpoint */
1556 if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
1558 if (ctrl.wIndex & __constant_cpu_to_le16(
1560 if (!dev->ep[tmp].is_in)
1563 if (dev->ep[tmp].is_in)
1566 if (ctrl.wValue != __constant_cpu_to_le16(
1570 goku_clear_halt(&dev->ep[tmp]);
1572 /* start ep0out status stage */
1573 writel(~(1<<0), ®s->EOP);
1574 dev->ep[0].stopped = 1;
1575 dev->ep0state = EP0_STATUS;
1577 case USB_RECIP_DEVICE:
1578 /* device remote wakeup: always clear */
1579 if (ctrl.wValue != __constant_cpu_to_le16(1))
1581 VDBG(dev, "clear dev remote wakeup\n");
1583 case USB_RECIP_INTERFACE:
1585 default: /* pass to gadget driver */
1595 VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
1596 ctrl.bRequestType, ctrl.bRequest,
1597 le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex),
1598 le16_to_cpu(ctrl.wLength));
1601 /* hw wants to know when we're configured (or not) */
1602 dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
1603 && ctrl.bRequestType == USB_RECIP_DEVICE);
1604 if (unlikely(dev->req_config))
1605 dev->configured = (ctrl.wValue != __constant_cpu_to_le16(0));
1607 /* delegate everything to the gadget driver.
1608 * it may respond after this irq handler returns.
1610 spin_unlock (&dev->lock);
1611 tmp = dev->driver->setup(&dev->gadget, &ctrl);
1612 spin_lock (&dev->lock);
1613 if (unlikely(tmp < 0)) {
1616 VDBG(dev, "req %02x.%02x protocol STALL; err %d\n",
1617 ctrl.bRequestType, ctrl.bRequest, tmp);
1619 command(regs, COMMAND_STALL, 0);
1620 dev->ep[0].stopped = 1;
1621 dev->ep0state = EP0_STALL;
1624 /* expect at least one data or status stage irq */
1627 #define ACK(irqbit) { \
1629 writel(~irqbit, ®s->int_status); \
1633 static irqreturn_t goku_irq(int irq, void *_dev, struct pt_regs *r)
1635 struct goku_udc *dev = _dev;
1636 struct goku_udc_regs __iomem *regs = dev->regs;
1638 u32 stat, handled = 0;
1639 unsigned i, rescans = 5;
1641 spin_lock(&dev->lock);
1644 stat = readl(®s->int_status) & dev->int_enable;
1649 /* device-wide irqs */
1650 if (unlikely(stat & INT_DEVWIDE)) {
1651 if (stat & INT_SYSERROR) {
1652 ERROR(dev, "system error\n");
1653 stop_activity(dev, dev->driver);
1656 // FIXME have a neater way to prevent re-enumeration
1660 if (stat & INT_PWRDETECT) {
1661 writel(~stat, ®s->int_status);
1662 if (readl(&dev->regs->power_detect) & PW_DETECT) {
1663 VDBG(dev, "connect\n");
1666 DBG(dev, "disconnect\n");
1667 if (dev->gadget.speed == USB_SPEED_FULL)
1668 stop_activity(dev, dev->driver);
1669 dev->ep0state = EP0_DISCONNECT;
1670 dev->int_enable = INT_DEVWIDE;
1671 writel(dev->int_enable, &dev->regs->int_enable);
1677 if (stat & INT_SUSPEND) {
1679 if (readl(®s->ep_status[0]) & EPxSTATUS_SUSPEND) {
1680 switch (dev->ep0state) {
1681 case EP0_DISCONNECT:
1687 DBG(dev, "USB suspend\n");
1688 dev->ep0state = EP0_SUSPEND;
1689 if (dev->gadget.speed != USB_SPEED_UNKNOWN
1691 && dev->driver->suspend) {
1692 spin_unlock(&dev->lock);
1693 dev->driver->suspend(&dev->gadget);
1694 spin_lock(&dev->lock);
1697 if (dev->ep0state != EP0_SUSPEND) {
1698 DBG(dev, "bogus USB resume %d\n",
1702 DBG(dev, "USB resume\n");
1703 dev->ep0state = EP0_IDLE;
1704 if (dev->gadget.speed != USB_SPEED_UNKNOWN
1706 && dev->driver->resume) {
1707 spin_unlock(&dev->lock);
1708 dev->driver->resume(&dev->gadget);
1709 spin_lock(&dev->lock);
1714 if (stat & INT_USBRESET) { /* hub reset done */
1716 INFO(dev, "USB reset done, gadget %s\n",
1717 dev->driver->driver.name);
1719 // and INT_ERR on some endpoint's crc/bitstuff/... problem
1722 /* progress ep0 setup, data, or status stages.
1723 * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs
1725 if (stat & INT_SETUP) {
1730 if (stat & INT_STATUSNAK) {
1731 ACK(INT_STATUSNAK|INT_ENDPOINT0);
1732 if (dev->ep0state == EP0_IN) {
1736 writel(~(1<<0), ®s->EOP);
1737 dev->ep0state = EP0_STATUS;
1740 if (stat & INT_ENDPOINT0) {
1747 /* dma completion */
1748 if (stat & INT_MSTRDEND) { /* IN */
1750 ep = &dev->ep[UDC_MSTRD_ENDPOINT];
1752 dma_advance(dev, ep);
1754 if (stat & INT_MSTWREND) { /* OUT */
1756 ep = &dev->ep[UDC_MSTWR_ENDPOINT];
1758 dma_advance(dev, ep);
1760 if (stat & INT_MSTWRTMOUT) { /* OUT */
1761 ACK(INT_MSTWRTMOUT);
1762 ep = &dev->ep[UDC_MSTWR_ENDPOINT];
1764 ERROR(dev, "%s write timeout ?\n", ep->ep.name);
1765 // reset dma? then dma_advance()
1769 for (i = 1; i < 4; i++) {
1770 u32 tmp = INT_EPxDATASET(i);
1776 if (list_empty (&ep->queue))
1777 pio_irq_disable(dev, regs, i);
1787 (void)readl(®s->int_enable);
1788 spin_unlock(&dev->lock);
1790 DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat,
1791 readl(®s->int_status), dev->int_enable);
1792 return IRQ_RETVAL(handled);
1797 /*-------------------------------------------------------------------------*/
1799 static void gadget_release(struct device *_dev)
1801 struct goku_udc *dev = dev_get_drvdata(_dev);
1806 /* tear down the binding between this driver and the pci device */
1808 static void goku_remove(struct pci_dev *pdev)
1810 struct goku_udc *dev = pci_get_drvdata(pdev);
1812 DBG(dev, "%s\n", __FUNCTION__);
1813 /* start with the driver above us */
1815 /* should have been done already by driver model core */
1816 WARN(dev, "pci remove, driver '%s' is still registered\n",
1817 dev->driver->driver.name);
1818 usb_gadget_unregister_driver(dev->driver);
1821 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1822 remove_proc_entry(proc_node_name, NULL);
1827 free_irq(pdev->irq, dev);
1830 if (dev->got_region)
1831 release_mem_region(pci_resource_start (pdev, 0),
1832 pci_resource_len (pdev, 0));
1834 pci_disable_device(pdev);
1835 device_unregister(&dev->gadget.dev);
1837 pci_set_drvdata(pdev, NULL);
1839 the_controller = NULL;
1841 INFO(dev, "unbind\n");
1844 /* wrap this driver around the specified pci device, but
1845 * don't respond over USB until a gadget driver binds to us.
1848 static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1850 struct goku_udc *dev = NULL;
1851 unsigned long resource, len;
1852 void __iomem *base = NULL;
1854 char buf [8], *bufp;
1856 /* if you want to support more than one controller in a system,
1857 * usb_gadget_driver_{register,unregister}() must change.
1859 if (the_controller) {
1860 WARN(dev, "ignoring %s\n", pci_name(pdev));
1864 printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
1869 /* alloc, and start init */
1870 dev = kmalloc (sizeof *dev, SLAB_KERNEL);
1872 pr_debug("enomem %s\n", pci_name(pdev));
1877 memset(dev, 0, sizeof *dev);
1878 spin_lock_init(&dev->lock);
1880 dev->gadget.ops = &goku_ops;
1882 /* the "gadget" abstracts/virtualizes the controller */
1883 strcpy(dev->gadget.dev.bus_id, "gadget");
1884 dev->gadget.dev.parent = &pdev->dev;
1885 dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
1886 dev->gadget.dev.release = gadget_release;
1887 dev->gadget.name = driver_name;
1889 /* now all the pci goodies ... */
1890 retval = pci_enable_device(pdev);
1892 DBG(dev, "can't enable, %d\n", retval);
1897 resource = pci_resource_start(pdev, 0);
1898 len = pci_resource_len(pdev, 0);
1899 if (!request_mem_region(resource, len, driver_name)) {
1900 DBG(dev, "controller already in use\n");
1904 dev->got_region = 1;
1906 base = ioremap_nocache(resource, len);
1908 DBG(dev, "can't map memory\n");
1912 dev->regs = (struct goku_udc_regs __iomem *) base;
1914 pci_set_drvdata(pdev, dev);
1915 INFO(dev, "%s\n", driver_desc);
1916 INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
1918 scnprintf(buf, sizeof buf, "%d", pdev->irq);
1921 bufp = __irq_itoa(pdev->irq);
1923 INFO(dev, "irq %s, pci mem %p\n", bufp, base);
1925 /* init to known state, then setup irqs */
1928 if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
1929 driver_name, dev) != 0) {
1930 DBG(dev, "request interrupt %s failed\n", bufp);
1936 pci_set_master(pdev);
1939 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1940 create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev);
1944 the_controller = dev;
1945 device_register(&dev->gadget.dev);
1956 /*-------------------------------------------------------------------------*/
1958 static struct pci_device_id pci_ids [] = { {
1959 .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
1961 .vendor = 0x102f, /* Toshiba */
1962 .device = 0x0107, /* this UDC */
1963 .subvendor = PCI_ANY_ID,
1964 .subdevice = PCI_ANY_ID,
1966 }, { /* end: all zeroes */ }
1968 MODULE_DEVICE_TABLE (pci, pci_ids);
1970 static struct pci_driver goku_pci_driver = {
1971 .name = (char *) driver_name,
1972 .id_table = pci_ids,
1973 .owner = THIS_MODULE,
1975 .probe = goku_probe,
1976 .remove = goku_remove,
1978 /* FIXME add power management support */
1981 static int __init init (void)
1983 return pci_register_driver (&goku_pci_driver);
1987 static void __exit cleanup (void)
1989 pci_unregister_driver (&goku_pci_driver);
1991 module_exit (cleanup);