2 * (C) Copyright 2003-2004
3 * Humboldt Solutions Ltd, adrian@humboldt.co.uk.
5 * This is a combined i2c adapter and algorithm driver for the
6 * MPC107/Tsi107 PowerPC northbridge and processors that include
7 * the same I2C unit (8240, 8245, 85xx).
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
16 #include <linux/kernel.h>
17 #include <linux/module.h>
18 #include <linux/sched.h>
19 #include <linux/init.h>
20 #include <linux/of_platform.h>
21 #include <linux/of_i2c.h>
24 #include <linux/fsl_devices.h>
25 #include <linux/i2c.h>
26 #include <linux/interrupt.h>
27 #include <linux/delay.h>
29 #define DRV_NAME "mpc-i2c"
31 #define MPC_I2C_FDR 0x04
32 #define MPC_I2C_CR 0x08
33 #define MPC_I2C_SR 0x0c
34 #define MPC_I2C_DR 0x10
35 #define MPC_I2C_DFSRR 0x14
55 wait_queue_head_t queue;
56 struct i2c_adapter adap;
61 static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x)
63 writeb(x, i2c->base + MPC_I2C_CR);
66 static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
68 struct mpc_i2c *i2c = dev_id;
69 if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) {
70 /* Read again to allow register to stabilise */
71 i2c->interrupt = readb(i2c->base + MPC_I2C_SR);
72 writeb(0, i2c->base + MPC_I2C_SR);
73 wake_up_interruptible(&i2c->queue);
78 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
79 * the bus, because it wants to send ACK.
80 * Following sequence of enabling/disabling and sending start/stop generates
81 * the pulse, so it's all OK.
83 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
87 writeccr(i2c, CCR_MEN);
89 writeccr(i2c, CCR_MSTA | CCR_MTX);
91 writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
93 writeccr(i2c, CCR_MEN);
97 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
99 unsigned long orig_jiffies = jiffies;
103 if (i2c->irq == NO_IRQ)
105 while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
107 if (time_after(jiffies, orig_jiffies + timeout)) {
108 pr_debug("I2C: timeout\n");
114 x = readb(i2c->base + MPC_I2C_SR);
115 writeb(0, i2c->base + MPC_I2C_SR);
118 result = wait_event_interruptible_timeout(i2c->queue,
119 (i2c->interrupt & CSR_MIF), timeout * HZ);
121 if (unlikely(result < 0)) {
122 pr_debug("I2C: wait interrupted\n");
124 } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
125 pr_debug("I2C: wait timeout\n");
137 if (!(x & CSR_MCF)) {
138 pr_debug("I2C: unfinished\n");
143 pr_debug("I2C: MAL\n");
147 if (writing && (x & CSR_RXAK)) {
148 pr_debug("I2C: No RXAK\n");
150 writeccr(i2c, CCR_MEN);
156 static void mpc_i2c_setclock(struct mpc_i2c *i2c)
158 /* Set clock and filters */
159 if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) {
160 writeb(0x31, i2c->base + MPC_I2C_FDR);
161 writeb(0x10, i2c->base + MPC_I2C_DFSRR);
162 } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200)
163 writeb(0x3f, i2c->base + MPC_I2C_FDR);
165 writel(0x1031, i2c->base + MPC_I2C_FDR);
168 static void mpc_i2c_start(struct mpc_i2c *i2c)
170 /* Clear arbitration */
171 writeb(0, i2c->base + MPC_I2C_SR);
173 writeccr(i2c, CCR_MEN);
176 static void mpc_i2c_stop(struct mpc_i2c *i2c)
178 writeccr(i2c, CCR_MEN);
181 static int mpc_write(struct mpc_i2c *i2c, int target,
182 const u8 * data, int length, int restart)
185 unsigned timeout = i2c->adap.timeout;
186 u32 flags = restart ? CCR_RSTA : 0;
190 writeccr(i2c, CCR_MEN);
191 /* Start as master */
192 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
193 /* Write target byte */
194 writeb((target << 1), i2c->base + MPC_I2C_DR);
196 result = i2c_wait(i2c, timeout, 1);
200 for (i = 0; i < length; i++) {
201 /* Write data byte */
202 writeb(data[i], i2c->base + MPC_I2C_DR);
204 result = i2c_wait(i2c, timeout, 1);
212 static int mpc_read(struct mpc_i2c *i2c, int target,
213 u8 * data, int length, int restart)
215 unsigned timeout = i2c->adap.timeout;
217 u32 flags = restart ? CCR_RSTA : 0;
221 writeccr(i2c, CCR_MEN);
222 /* Switch to read - restart */
223 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
224 /* Write target address byte - this time with the read flag set */
225 writeb((target << 1) | 1, i2c->base + MPC_I2C_DR);
227 result = i2c_wait(i2c, timeout, 1);
233 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
235 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
237 readb(i2c->base + MPC_I2C_DR);
240 for (i = 0; i < length; i++) {
241 result = i2c_wait(i2c, timeout, 0);
245 /* Generate txack on next to last byte */
247 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
248 /* Generate stop on last byte */
250 writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK);
251 data[i] = readb(i2c->base + MPC_I2C_DR);
257 static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
259 struct i2c_msg *pmsg;
262 unsigned long orig_jiffies = jiffies;
263 struct mpc_i2c *i2c = i2c_get_adapdata(adap);
267 /* Allow bus up to 1s to become not busy */
268 while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
269 if (signal_pending(current)) {
270 pr_debug("I2C: Interrupted\n");
274 if (time_after(jiffies, orig_jiffies + HZ)) {
275 pr_debug("I2C: timeout\n");
276 if (readb(i2c->base + MPC_I2C_SR) ==
277 (CSR_MCF | CSR_MBB | CSR_RXAK))
284 for (i = 0; ret >= 0 && i < num; i++) {
286 pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
287 pmsg->flags & I2C_M_RD ? "read" : "write",
288 pmsg->len, pmsg->addr, i + 1, num);
289 if (pmsg->flags & I2C_M_RD)
291 mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
294 mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
297 return (ret < 0) ? ret : num;
300 static u32 mpc_functionality(struct i2c_adapter *adap)
302 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
305 static const struct i2c_algorithm mpc_algo = {
306 .master_xfer = mpc_xfer,
307 .functionality = mpc_functionality,
310 static struct i2c_adapter mpc_ops = {
311 .owner = THIS_MODULE,
312 .name = "MPC adapter",
317 static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
322 i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
326 if (of_get_property(op->node, "dfsrr", NULL))
327 i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
329 if (of_device_is_compatible(op->node, "fsl,mpc5200-i2c") ||
330 of_device_is_compatible(op->node, "mpc5200-i2c"))
331 i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
333 init_waitqueue_head(&i2c->queue);
335 i2c->base = of_iomap(op->node, 0);
337 printk(KERN_ERR "i2c-mpc - failed to map controller\n");
342 i2c->irq = irq_of_parse_and_map(op->node, 0);
343 if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */
344 result = request_irq(i2c->irq, mpc_i2c_isr,
345 IRQF_SHARED, "i2c-mpc", i2c);
347 printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
352 mpc_i2c_setclock(i2c);
354 dev_set_drvdata(&op->dev, i2c);
357 i2c_set_adapdata(&i2c->adap, i2c);
358 i2c->adap.dev.parent = &op->dev;
360 result = i2c_add_adapter(&i2c->adap);
362 printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
365 of_register_i2c_devices(&i2c->adap, op->node);
370 dev_set_drvdata(&op->dev, NULL);
371 free_irq(i2c->irq, i2c);
373 irq_dispose_mapping(i2c->irq);
380 static int __devexit fsl_i2c_remove(struct of_device *op)
382 struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
384 i2c_del_adapter(&i2c->adap);
385 dev_set_drvdata(&op->dev, NULL);
387 if (i2c->irq != NO_IRQ)
388 free_irq(i2c->irq, i2c);
390 irq_dispose_mapping(i2c->irq);
396 static const struct of_device_id mpc_i2c_of_match[] = {
397 {.compatible = "fsl-i2c",},
400 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
403 /* Structure for a device driver */
404 static struct of_platform_driver mpc_i2c_driver = {
405 .match_table = mpc_i2c_of_match,
406 .probe = fsl_i2c_probe,
407 .remove = __devexit_p(fsl_i2c_remove),
409 .owner = THIS_MODULE,
414 static int __init fsl_i2c_init(void)
418 rv = of_register_platform_driver(&mpc_i2c_driver);
420 printk(KERN_ERR DRV_NAME
421 " of_register_platform_driver failed (%i)\n", rv);
425 static void __exit fsl_i2c_exit(void)
427 of_unregister_platform_driver(&mpc_i2c_driver);
430 module_init(fsl_i2c_init);
431 module_exit(fsl_i2c_exit);
433 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
435 ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");
436 MODULE_LICENSE("GPL");