1 /* linux/arch/arm/mach-s3c2443/clock.c
3 * Copyright (c) 2007 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
6 * S3C2443 Clock control support
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 #include <linux/init.h>
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/list.h>
27 #include <linux/errno.h>
28 #include <linux/err.h>
29 #include <linux/sysdev.h>
30 #include <linux/clk.h>
31 #include <linux/mutex.h>
32 #include <linux/delay.h>
33 #include <linux/serial_core.h>
35 #include <asm/mach/map.h>
37 #include <asm/hardware.h>
40 #include <asm/arch/regs-s3c2443-clock.h>
42 #include <asm/plat-s3c24xx/s3c2443.h>
43 #include <asm/plat-s3c24xx/clock.h>
44 #include <asm/plat-s3c24xx/cpu.h>
46 /* We currently have to assume that the system is running
47 * from the XTPll input, and that all ***REFCLKs are being
48 * fed from it, as we cannot read the state of OM[4] from
51 * It would be possible for each board initialisation to
52 * set the correct muxing at initialisation
55 static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
57 unsigned int clocks = clk->ctrlbit;
60 clkcon = __raw_readl(S3C2443_HCLKCON);
67 __raw_writel(clkcon, S3C2443_HCLKCON);
72 static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
74 unsigned int clocks = clk->ctrlbit;
77 clkcon = __raw_readl(S3C2443_PCLKCON);
84 __raw_writel(clkcon, S3C2443_HCLKCON);
89 static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
91 unsigned int clocks = clk->ctrlbit;
94 clkcon = __raw_readl(S3C2443_SCLKCON);
101 __raw_writel(clkcon, S3C2443_SCLKCON);
106 static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
110 unsigned long parent_rate = clk_get_rate(clk->parent);
113 if (rate > parent_rate)
116 /* note, we remove the +/- 1 calculations as they cancel out */
118 div = (rate / parent_rate);
125 return parent_rate / div;
128 static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
131 return s3c2443_roundrate_clksrc(clk, rate, 4);
134 static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
137 return s3c2443_roundrate_clksrc(clk, rate, 16);
140 static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
143 return s3c2443_roundrate_clksrc(clk, rate, 256);
146 /* clock selections */
148 /* CPU EXTCLK input */
149 static struct clk clk_ext = {
154 static struct clk clk_mpllref = {
161 static struct clk clk_mpll = {
163 .parent = &clk_mpllref,
168 static struct clk clk_epllref;
170 static struct clk clk_epll = {
172 .parent = &clk_epllref,
176 static struct clk clk_i2s_ext = {
181 static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
183 unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
185 clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
187 if (parent == &clk_xtal)
188 clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
189 else if (parent == &clk_ext)
190 clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
191 else if (parent != &clk_mpllref)
194 __raw_writel(clksrc, S3C2443_CLKSRC);
195 clk->parent = parent;
200 static struct clk clk_epllref = {
203 .set_parent = s3c2443_setparent_epllref,
206 static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
208 unsigned long parent_rate = clk_get_rate(clk->parent);
209 unsigned long div = __raw_readl(S3C2443_CLKDIV0);
211 div &= S3C2443_CLKDIV0_EXTDIV_MASK;
212 div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
214 return parent_rate / (div + 1);
217 static struct clk clk_mdivclk = {
219 .parent = &clk_mpllref,
221 .get_rate = s3c2443_getrate_mdivclk,
225 static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
227 unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
229 clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
230 S3C2443_CLKSRC_EXTCLK_DIV);
232 if (parent == &clk_mpll)
233 clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
234 else if (parent == &clk_mdivclk)
235 clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
236 else if (parent != &clk_mpllref)
239 __raw_writel(clksrc, S3C2443_CLKSRC);
240 clk->parent = parent;
245 static struct clk clk_msysclk = {
249 .set_parent = s3c2443_setparent_msysclk,
255 * this is sourced from either the EPLL or the EPLLref clock
258 static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
260 unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
262 if (parent == &clk_epll)
263 clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
264 else if (parent == &clk_epllref)
265 clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
269 __raw_writel(clksrc, S3C2443_CLKSRC);
270 clk->parent = parent;
275 static struct clk clk_esysclk = {
279 .set_parent = s3c2443_setparent_esysclk,
284 * UART baud-rate clock sourced from esysclk via a divisor
287 static unsigned long s3c2443_getrate_uart(struct clk *clk)
289 unsigned long parent_rate = clk_get_rate(clk->parent);
290 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
292 div &= S3C2443_CLKDIV1_UARTDIV_MASK;
293 div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
295 return parent_rate / (div + 1);
299 static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
301 unsigned long parent_rate = clk_get_rate(clk->parent);
302 unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
304 rate = s3c2443_roundrate_clksrc16(clk, rate);
305 rate = parent_rate / rate;
307 clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
308 clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
310 __raw_writel(clkdivn, S3C2443_CLKDIV1);
314 static struct clk clk_uart = {
317 .parent = &clk_esysclk,
318 .get_rate = s3c2443_getrate_uart,
319 .set_rate = s3c2443_setrate_uart,
320 .round_rate = s3c2443_roundrate_clksrc16,
325 * high-speed spi clock, sourced from esysclk
328 static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
330 unsigned long parent_rate = clk_get_rate(clk->parent);
331 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
333 div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
334 div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
336 return parent_rate / (div + 1);
340 static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
342 unsigned long parent_rate = clk_get_rate(clk->parent);
343 unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
345 rate = s3c2443_roundrate_clksrc4(clk, rate);
346 rate = parent_rate / rate;
348 clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
349 clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
351 __raw_writel(clkdivn, S3C2443_CLKDIV1);
355 static struct clk clk_hsspi = {
358 .parent = &clk_esysclk,
359 .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
360 .enable = s3c2443_clkcon_enable_s,
361 .get_rate = s3c2443_getrate_hsspi,
362 .set_rate = s3c2443_setrate_hsspi,
363 .round_rate = s3c2443_roundrate_clksrc4,
368 * usb host bus-clock, usually 48MHz to provide USB bus clock timing
371 static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
373 unsigned long parent_rate = clk_get_rate(clk->parent);
374 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
376 div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
377 div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
379 return parent_rate / (div + 1);
382 static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
384 unsigned long parent_rate = clk_get_rate(clk->parent);
385 unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
387 rate = s3c2443_roundrate_clksrc4(clk, rate);
388 rate = parent_rate / rate;
390 clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
391 clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
393 __raw_writel(clkdivn, S3C2443_CLKDIV1);
397 static struct clk clk_usb_bus_host = {
398 .name = "usb-bus-host-parent",
400 .parent = &clk_esysclk,
401 .ctrlbit = S3C2443_SCLKCON_USBHOST,
402 .enable = s3c2443_clkcon_enable_s,
403 .get_rate = s3c2443_getrate_usbhost,
404 .set_rate = s3c2443_setrate_usbhost,
405 .round_rate = s3c2443_roundrate_clksrc4,
410 * this clock is sourced from epll, and is fed through a divider,
411 * to a mux controlled by sclkcon where either it or a extclk can
412 * be fed to the hsmmc block
415 static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
417 unsigned long parent_rate = clk_get_rate(clk->parent);
418 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
420 div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
421 div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
423 return parent_rate / (div + 1);
426 static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
428 unsigned long parent_rate = clk_get_rate(clk->parent);
429 unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
431 rate = s3c2443_roundrate_clksrc4(clk, rate);
432 rate = parent_rate / rate;
434 clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
435 clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
437 __raw_writel(clkdivn, S3C2443_CLKDIV1);
441 static struct clk clk_hsmmc_div = {
444 .parent = &clk_esysclk,
445 .get_rate = s3c2443_getrate_hsmmc_div,
446 .set_rate = s3c2443_setrate_hsmmc_div,
447 .round_rate = s3c2443_roundrate_clksrc4,
450 static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
452 unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
454 clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
455 S3C2443_SCLKCON_HSMMCCLK_EPLL);
457 if (parent == &clk_epll)
458 clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
459 else if (parent == &clk_ext)
460 clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
464 if (clk->usage > 0) {
465 __raw_writel(clksrc, S3C2443_SCLKCON);
468 clk->parent = parent;
472 static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
474 return s3c2443_setparent_hsmmc(clk, clk->parent);
477 static struct clk clk_hsmmc = {
480 .parent = &clk_hsmmc_div,
481 .enable = s3c2443_enable_hsmmc,
482 .set_parent = s3c2443_setparent_hsmmc,
487 * this clock is the output from the i2s divisor of esysclk
490 static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
492 unsigned long parent_rate = clk_get_rate(clk->parent);
493 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
495 div &= S3C2443_CLKDIV1_I2SDIV_MASK;
496 div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
498 return parent_rate / (div + 1);
501 static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
503 unsigned long parent_rate = clk_get_rate(clk->parent);
504 unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
506 rate = s3c2443_roundrate_clksrc16(clk, rate);
507 rate = parent_rate / rate;
509 clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
510 clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
512 __raw_writel(clkdivn, S3C2443_CLKDIV1);
516 static struct clk clk_i2s_eplldiv = {
517 .name = "i2s-eplldiv",
519 .parent = &clk_esysclk,
520 .get_rate = s3c2443_getrate_i2s_eplldiv,
521 .set_rate = s3c2443_setrate_i2s_eplldiv,
522 .round_rate = s3c2443_roundrate_clksrc16,
527 * i2s bus reference clock, selectable from external, esysclk or epllref
530 static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
532 unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
534 clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
536 if (parent == &clk_epllref)
537 clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
538 else if (parent == &clk_i2s_ext)
539 clksrc |= S3C2443_CLKSRC_I2S_EXT;
540 else if (parent != &clk_i2s_eplldiv)
543 clk->parent = parent;
544 __raw_writel(clksrc, S3C2443_CLKSRC);
549 static struct clk clk_i2s = {
552 .parent = &clk_i2s_eplldiv,
553 .ctrlbit = S3C2443_SCLKCON_I2SCLK,
554 .enable = s3c2443_clkcon_enable_s,
555 .set_parent = s3c2443_setparent_i2s,
560 * camera interface bus-clock, divided down from esysclk
563 static unsigned long s3c2443_getrate_cam(struct clk *clk)
565 unsigned long parent_rate = clk_get_rate(clk->parent);
566 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
568 div &= S3C2443_CLKDIV1_CAMDIV_MASK;
569 div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
571 return parent_rate / (div + 1);
574 static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
576 unsigned long parent_rate = clk_get_rate(clk->parent);
577 unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
579 rate = s3c2443_roundrate_clksrc16(clk, rate);
580 rate = parent_rate / rate;
582 clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
583 clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
585 __raw_writel(clkdiv1, S3C2443_CLKDIV1);
589 static struct clk clk_cam = {
590 .name = "camif-upll", /* same as 2440 name */
592 .parent = &clk_esysclk,
593 .ctrlbit = S3C2443_SCLKCON_CAMCLK,
594 .enable = s3c2443_clkcon_enable_s,
595 .get_rate = s3c2443_getrate_cam,
596 .set_rate = s3c2443_setrate_cam,
597 .round_rate = s3c2443_roundrate_clksrc16,
602 * display interface clock, divided from esysclk
605 static unsigned long s3c2443_getrate_display(struct clk *clk)
607 unsigned long parent_rate = clk_get_rate(clk->parent);
608 unsigned long div = __raw_readl(S3C2443_CLKDIV1);
610 div &= S3C2443_CLKDIV1_DISPDIV_MASK;
611 div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
613 return parent_rate / (div + 1);
616 static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
618 unsigned long parent_rate = clk_get_rate(clk->parent);
619 unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
621 rate = s3c2443_roundrate_clksrc256(clk, rate);
622 rate = parent_rate / rate;
624 clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
625 clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
627 __raw_writel(clkdivn, S3C2443_CLKDIV1);
631 static struct clk clk_display = {
632 .name = "display-if",
634 .parent = &clk_esysclk,
635 .ctrlbit = S3C2443_SCLKCON_DISPCLK,
636 .enable = s3c2443_clkcon_enable_s,
637 .get_rate = s3c2443_getrate_display,
638 .set_rate = s3c2443_setrate_display,
639 .round_rate = s3c2443_roundrate_clksrc256,
642 /* standard clock definitions */
644 static struct clk init_clocks_disable[] = {
653 .enable = s3c2443_clkcon_enable_p,
654 .ctrlbit = S3C2443_PCLKCON_SDI,
659 .enable = s3c2443_clkcon_enable_p,
660 .ctrlbit = S3C2443_PCLKCON_ADC,
665 .enable = s3c2443_clkcon_enable_p,
666 .ctrlbit = S3C2443_PCLKCON_IIC,
671 .enable = s3c2443_clkcon_enable_p,
672 .ctrlbit = S3C2443_PCLKCON_IIS,
677 .enable = s3c2443_clkcon_enable_p,
678 .ctrlbit = S3C2443_PCLKCON_SPI0,
683 .enable = s3c2443_clkcon_enable_p,
684 .ctrlbit = S3C2443_PCLKCON_SPI1,
688 static struct clk init_clocks[] = {
693 .enable = s3c2443_clkcon_enable_h,
694 .ctrlbit = S3C2443_HCLKCON_DMA0,
699 .enable = s3c2443_clkcon_enable_h,
700 .ctrlbit = S3C2443_HCLKCON_DMA1,
705 .enable = s3c2443_clkcon_enable_h,
706 .ctrlbit = S3C2443_HCLKCON_DMA2,
711 .enable = s3c2443_clkcon_enable_h,
712 .ctrlbit = S3C2443_HCLKCON_DMA3,
717 .enable = s3c2443_clkcon_enable_h,
718 .ctrlbit = S3C2443_HCLKCON_DMA4,
723 .enable = s3c2443_clkcon_enable_h,
724 .ctrlbit = S3C2443_HCLKCON_DMA5,
729 .enable = s3c2443_clkcon_enable_h,
730 .ctrlbit = S3C2443_HCLKCON_LCDC,
735 .enable = s3c2443_clkcon_enable_p,
736 .ctrlbit = S3C2443_PCLKCON_GPIO,
741 .enable = s3c2443_clkcon_enable_h,
742 .ctrlbit = S3C2443_HCLKCON_USBH,
744 .name = "usb-device",
747 .enable = s3c2443_clkcon_enable_h,
748 .ctrlbit = S3C2443_HCLKCON_USBD,
753 .enable = s3c2443_clkcon_enable_h,
754 .ctrlbit = S3C2443_HCLKCON_HSMMC,
759 .enable = s3c2443_clkcon_enable_h,
760 .ctrlbit = S3C2443_HCLKCON_CFC,
765 .enable = s3c2443_clkcon_enable_h,
766 .ctrlbit = S3C2443_HCLKCON_SSMC,
771 .enable = s3c2443_clkcon_enable_p,
772 .ctrlbit = S3C2443_PCLKCON_PWMT,
777 .enable = s3c2443_clkcon_enable_p,
778 .ctrlbit = S3C2443_PCLKCON_UART0,
783 .enable = s3c2443_clkcon_enable_p,
784 .ctrlbit = S3C2443_PCLKCON_UART1,
789 .enable = s3c2443_clkcon_enable_p,
790 .ctrlbit = S3C2443_PCLKCON_UART2,
795 .enable = s3c2443_clkcon_enable_p,
796 .ctrlbit = S3C2443_PCLKCON_UART3,
801 .enable = s3c2443_clkcon_enable_p,
802 .ctrlbit = S3C2443_PCLKCON_RTC,
807 .ctrlbit = S3C2443_PCLKCON_WDT,
809 .name = "usb-bus-host",
811 .parent = &clk_usb_bus_host,
816 .ctrlbit = S3C2443_PCLKCON_AC97,
820 /* clocks to add where we need to check their parentage */
822 /* s3c2443_clk_initparents
824 * Initialise the parents for the clocks that we get at start-time
827 static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
829 printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
830 return clk_set_parent(clk, parent);
833 static void __init s3c2443_clk_initparents(void)
835 unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
838 switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
839 case S3C2443_CLKSRC_EPLLREF_EXTCLK:
843 case S3C2443_CLKSRC_EPLLREF_XTAL:
848 case S3C2443_CLKSRC_EPLLREF_MPLLREF:
849 case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
850 parent = &clk_mpllref;
854 clk_init_set_parent(&clk_epllref, parent);
856 switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
857 case S3C2443_CLKSRC_I2S_EXT:
858 parent = &clk_i2s_ext;
861 case S3C2443_CLKSRC_I2S_EPLLDIV:
863 parent = &clk_i2s_eplldiv;
866 case S3C2443_CLKSRC_I2S_EPLLREF:
867 case S3C2443_CLKSRC_I2S_EPLLREF3:
868 parent = &clk_epllref;
871 clk_init_set_parent(&clk_i2s, &clk_epllref);
875 parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
876 &clk_epll : &clk_epllref;
878 clk_init_set_parent(&clk_esysclk, parent);
882 if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
885 parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
886 &clk_mdivclk : &clk_mpllref;
889 clk_init_set_parent(&clk_msysclk, parent);
892 /* armdiv divisor table */
894 static unsigned int armdiv[16] = {
895 [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
896 [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
897 [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
898 [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
899 [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
900 [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
901 [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
902 [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
905 static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
907 clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
909 return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
912 static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
914 clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
915 clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
920 /* clocks to add straight away */
922 static struct clk *clks[] __initdata = {
941 void __init s3c2443_init_clocks(int xtal)
943 unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
944 unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
945 unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
954 pll = s3c2443_get_mpll(mpllcon, xtal);
956 fclk = pll / s3c2443_fclk_div(clkdiv0);
957 hclk = fclk / s3c2443_get_prediv(clkdiv0);
958 hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
959 pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
961 s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
963 printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
964 (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
965 print_mhz(pll), print_mhz(fclk),
966 print_mhz(hclk), print_mhz(pclk));
968 s3c2443_clk_initparents();
970 for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
973 ret = s3c24xx_register_clock(clkp);
975 printk(KERN_ERR "Failed to register clock %s (%d)\n",
980 clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
982 clk_usb_bus.parent = &clk_usb_bus_host;
984 /* ensure usb bus clock is within correct rate of 48MHz */
986 if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
987 printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
988 clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
991 printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
992 (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
993 print_mhz(clk_get_rate(&clk_epll)),
994 print_mhz(clk_get_rate(&clk_usb_bus)));
996 /* register clocks from clock array */
999 for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
1000 ret = s3c24xx_register_clock(clkp);
1002 printk(KERN_ERR "Failed to register clock %s (%d)\n",
1007 /* We must be careful disabling the clocks we are not intending to
1008 * be using at boot time, as subsytems such as the LCD which do
1009 * their own DMA requests to the bus can cause the system to lockup
1010 * if they where in the middle of requesting bus access.
1012 * Disabling the LCD clock if the LCD is active is very dangerous,
1013 * and therefore the bootloader should be careful to not enable
1014 * the LCD clock if it is not needed.
1017 /* install (and disable) the clocks we do not need immediately */
1019 clkp = init_clocks_disable;
1020 for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
1022 ret = s3c24xx_register_clock(clkp);
1024 printk(KERN_ERR "Failed to register clock %s (%d)\n",
1028 (clkp->enable)(clkp, 0);