[SCSI] scsi_transport_spi.c: make print_nego() static
[linux-2.6] / drivers / char / n_hdlc.c
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *      Al Longyear <longyear@netcom.com>,
10  *      Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  * $Id: n_hdlc.c,v 4.8 2003/05/06 21:18:51 paulkf Exp $
14  *
15  * This code is released under the GNU General Public License (GPL)
16  *
17  * This module implements the tty line discipline N_HDLC for use with
18  * tty device drivers that support bit-synchronous HDLC communications.
19  *
20  * All HDLC data is frame oriented which means:
21  *
22  * 1. tty write calls represent one complete transmit frame of data
23  *    The device driver should accept the complete frame or none of 
24  *    the frame (busy) in the write method. Each write call should have
25  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
26  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
27  *    should include any crc bytes required. For example, when using
28  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
29  *    the application may transmit is limited to 65531 bytes. For CCITT
30  *    CRC16, the maximum application frame size would be 65533.
31  *
32  *
33  * 2. receive callbacks from the device driver represents
34  *    one received frame. The device driver should bypass
35  *    the tty flip buffer and call the line discipline receive
36  *    callback directly to avoid fragmenting or concatenating
37  *    multiple frames into a single receive callback.
38  *
39  *    The HDLC line discipline queues the receive frames in separate
40  *    buffers so complete receive frames can be returned by the
41  *    tty read calls.
42  *
43  * 3. tty read calls returns an entire frame of data or nothing.
44  *    
45  * 4. all send and receive data is considered raw. No processing
46  *    or translation is performed by the line discipline, regardless
47  *    of the tty flags
48  *
49  * 5. When line discipline is queried for the amount of receive
50  *    data available (FIOC), 0 is returned if no data available,
51  *    otherwise the count of the next available frame is returned.
52  *    (instead of the sum of all received frame counts).
53  *
54  * These conventions allow the standard tty programming interface
55  * to be used for synchronous HDLC applications when used with
56  * this line discipline (or another line discipline that is frame
57  * oriented such as N_PPP).
58  *
59  * The SyncLink driver (synclink.c) implements both asynchronous
60  * (using standard line discipline N_TTY) and synchronous HDLC
61  * (using N_HDLC) communications, with the latter using the above
62  * conventions.
63  *
64  * This implementation is very basic and does not maintain
65  * any statistics. The main point is to enforce the raw data
66  * and frame orientation of HDLC communications.
67  *
68  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
69  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
70  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
71  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
72  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
73  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
74  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
75  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
76  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
77  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
78  * OF THE POSSIBILITY OF SUCH DAMAGE.
79  */
80
81 #define HDLC_MAGIC 0x239e
82 #define HDLC_VERSION "$Revision: 4.8 $"
83
84 #include <linux/config.h>
85 #include <linux/module.h>
86 #include <linux/init.h>
87 #include <linux/kernel.h>
88 #include <linux/sched.h>
89 #include <linux/types.h>
90 #include <linux/fcntl.h>
91 #include <linux/interrupt.h>
92 #include <linux/ptrace.h>
93
94 #undef VERSION
95 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
96
97 #include <linux/poll.h>
98 #include <linux/in.h>
99 #include <linux/ioctl.h>
100 #include <linux/slab.h>
101 #include <linux/tty.h>
102 #include <linux/errno.h>
103 #include <linux/string.h>       /* used in new tty drivers */
104 #include <linux/signal.h>       /* used in new tty drivers */
105 #include <linux/if.h>
106 #include <linux/bitops.h>
107
108 #include <asm/system.h>
109 #include <asm/termios.h>
110 #include <asm/uaccess.h>
111
112 /*
113  * Buffers for individual HDLC frames
114  */
115 #define MAX_HDLC_FRAME_SIZE 65535 
116 #define DEFAULT_RX_BUF_COUNT 10
117 #define MAX_RX_BUF_COUNT 60
118 #define DEFAULT_TX_BUF_COUNT 1
119
120 struct n_hdlc_buf {
121         struct n_hdlc_buf *link;
122         int               count;
123         char              buf[1];
124 };
125
126 #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe)
127
128 struct n_hdlc_buf_list {
129         struct n_hdlc_buf *head;
130         struct n_hdlc_buf *tail;
131         int               count;
132         spinlock_t        spinlock;
133 };
134
135 /**
136  * struct n_hdlc - per device instance data structure
137  * @magic - magic value for structure
138  * @flags - miscellaneous control flags
139  * @tty - ptr to TTY structure
140  * @backup_tty - TTY to use if tty gets closed
141  * @tbusy - reentrancy flag for tx wakeup code
142  * @woke_up - FIXME: describe this field
143  * @tbuf - currently transmitting tx buffer
144  * @tx_buf_list - list of pending transmit frame buffers
145  * @rx_buf_list - list of received frame buffers
146  * @tx_free_buf_list - list unused transmit frame buffers
147  * @rx_free_buf_list - list unused received frame buffers
148  */
149 struct n_hdlc {
150         int                     magic;
151         __u32                   flags;
152         struct tty_struct       *tty;
153         struct tty_struct       *backup_tty;
154         int                     tbusy;
155         int                     woke_up;
156         struct n_hdlc_buf       *tbuf;
157         struct n_hdlc_buf_list  tx_buf_list;
158         struct n_hdlc_buf_list  rx_buf_list;
159         struct n_hdlc_buf_list  tx_free_buf_list;
160         struct n_hdlc_buf_list  rx_free_buf_list;
161 };
162
163 /*
164  * HDLC buffer list manipulation functions
165  */
166 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
167 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
168                            struct n_hdlc_buf *buf);
169 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
170
171 /* Local functions */
172
173 static struct n_hdlc *n_hdlc_alloc (void);
174
175 /* debug level can be set by insmod for debugging purposes */
176 #define DEBUG_LEVEL_INFO        1
177 static int debuglevel;
178
179 /* max frame size for memory allocations */
180 static int maxframe = 4096;
181
182 /* TTY callbacks */
183
184 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
185                            __u8 __user *buf, size_t nr);
186 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
187                             const unsigned char *buf, size_t nr);
188 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
189                             unsigned int cmd, unsigned long arg);
190 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
191                                     poll_table *wait);
192 static int n_hdlc_tty_open(struct tty_struct *tty);
193 static void n_hdlc_tty_close(struct tty_struct *tty);
194 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
195                                char *fp, int count);
196 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
197
198 #define bset(p,b)       ((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
199
200 #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
201 #define n_hdlc2tty(n_hdlc)      ((n_hdlc)->tty)
202
203 static struct tty_ldisc n_hdlc_ldisc = {
204         .owner          = THIS_MODULE,
205         .magic          = TTY_LDISC_MAGIC,
206         .name           = "hdlc",
207         .open           = n_hdlc_tty_open,
208         .close          = n_hdlc_tty_close,
209         .read           = n_hdlc_tty_read,
210         .write          = n_hdlc_tty_write,
211         .ioctl          = n_hdlc_tty_ioctl,
212         .poll           = n_hdlc_tty_poll,
213         .receive_buf    = n_hdlc_tty_receive,
214         .write_wakeup   = n_hdlc_tty_wakeup,
215 };
216
217 /**
218  * n_hdlc_release - release an n_hdlc per device line discipline info structure
219  * @n_hdlc - per device line discipline info structure
220  */
221 static void n_hdlc_release(struct n_hdlc *n_hdlc)
222 {
223         struct tty_struct *tty = n_hdlc2tty (n_hdlc);
224         struct n_hdlc_buf *buf;
225         
226         if (debuglevel >= DEBUG_LEVEL_INFO)     
227                 printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
228                 
229         /* Ensure that the n_hdlcd process is not hanging on select()/poll() */
230         wake_up_interruptible (&tty->read_wait);
231         wake_up_interruptible (&tty->write_wait);
232
233         if (tty != NULL && tty->disc_data == n_hdlc)
234                 tty->disc_data = NULL;  /* Break the tty->n_hdlc link */
235
236         /* Release transmit and receive buffers */
237         for(;;) {
238                 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
239                 if (buf) {
240                         kfree(buf);
241                 } else
242                         break;
243         }
244         for(;;) {
245                 buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
246                 if (buf) {
247                         kfree(buf);
248                 } else
249                         break;
250         }
251         for(;;) {
252                 buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
253                 if (buf) {
254                         kfree(buf);
255                 } else
256                         break;
257         }
258         for(;;) {
259                 buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
260                 if (buf) {
261                         kfree(buf);
262                 } else
263                         break;
264         }
265         kfree(n_hdlc->tbuf);
266         kfree(n_hdlc);
267         
268 }       /* end of n_hdlc_release() */
269
270 /**
271  * n_hdlc_tty_close - line discipline close
272  * @tty - pointer to tty info structure
273  *
274  * Called when the line discipline is changed to something
275  * else, the tty is closed, or the tty detects a hangup.
276  */
277 static void n_hdlc_tty_close(struct tty_struct *tty)
278 {
279         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
280
281         if (debuglevel >= DEBUG_LEVEL_INFO)     
282                 printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
283                 
284         if (n_hdlc != NULL) {
285                 if (n_hdlc->magic != HDLC_MAGIC) {
286                         printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
287                         return;
288                 }
289 #if defined(TTY_NO_WRITE_SPLIT)
290                 clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
291 #endif
292                 tty->disc_data = NULL;
293                 if (tty == n_hdlc->backup_tty)
294                         n_hdlc->backup_tty = NULL;
295                 if (tty != n_hdlc->tty)
296                         return;
297                 if (n_hdlc->backup_tty) {
298                         n_hdlc->tty = n_hdlc->backup_tty;
299                 } else {
300                         n_hdlc_release (n_hdlc);
301                 }
302         }
303         
304         if (debuglevel >= DEBUG_LEVEL_INFO)     
305                 printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
306                 
307 }       /* end of n_hdlc_tty_close() */
308
309 /**
310  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
311  * @tty - pointer to tty info structure
312  *
313  * Returns 0 if success, otherwise error code
314  */
315 static int n_hdlc_tty_open (struct tty_struct *tty)
316 {
317         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
318
319         if (debuglevel >= DEBUG_LEVEL_INFO)     
320                 printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
321                 __FILE__,__LINE__,
322                 tty->name);
323                 
324         /* There should not be an existing table for this slot. */
325         if (n_hdlc) {
326                 printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
327                 return -EEXIST;
328         }
329         
330         n_hdlc = n_hdlc_alloc();
331         if (!n_hdlc) {
332                 printk (KERN_ERR "n_hdlc_alloc failed\n");
333                 return -ENFILE;
334         }
335                 
336         tty->disc_data = n_hdlc;
337         n_hdlc->tty    = tty;
338         tty->receive_room = 65536;
339         
340 #if defined(TTY_NO_WRITE_SPLIT)
341         /* change tty_io write() to not split large writes into 8K chunks */
342         set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
343 #endif
344         
345         /* Flush any pending characters in the driver and discipline. */
346         
347         if (tty->ldisc.flush_buffer)
348                 tty->ldisc.flush_buffer (tty);
349
350         if (tty->driver->flush_buffer)
351                 tty->driver->flush_buffer (tty);
352                 
353         if (debuglevel >= DEBUG_LEVEL_INFO)     
354                 printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
355                 
356         return 0;
357         
358 }       /* end of n_tty_hdlc_open() */
359
360 /**
361  * n_hdlc_send_frames - send frames on pending send buffer list
362  * @n_hdlc - pointer to ldisc instance data
363  * @tty - pointer to tty instance data
364  *
365  * Send frames on pending send buffer list until the driver does not accept a
366  * frame (busy) this function is called after adding a frame to the send buffer
367  * list and by the tty wakeup callback.
368  */
369 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
370 {
371         register int actual;
372         unsigned long flags;
373         struct n_hdlc_buf *tbuf;
374
375         if (debuglevel >= DEBUG_LEVEL_INFO)     
376                 printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
377  check_again:
378                 
379         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
380         if (n_hdlc->tbusy) {
381                 n_hdlc->woke_up = 1;
382                 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
383                 return;
384         }
385         n_hdlc->tbusy = 1;
386         n_hdlc->woke_up = 0;
387         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
388
389         /* get current transmit buffer or get new transmit */
390         /* buffer from list of pending transmit buffers */
391                 
392         tbuf = n_hdlc->tbuf;
393         if (!tbuf)
394                 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
395                 
396         while (tbuf) {
397                 if (debuglevel >= DEBUG_LEVEL_INFO)     
398                         printk("%s(%d)sending frame %p, count=%d\n",
399                                 __FILE__,__LINE__,tbuf,tbuf->count);
400                         
401                 /* Send the next block of data to device */
402                 tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
403                 actual = tty->driver->write(tty, tbuf->buf, tbuf->count);
404                     
405                 /* if transmit error, throw frame away by */
406                 /* pretending it was accepted by driver */
407                 if (actual < 0)
408                         actual = tbuf->count;
409                 
410                 if (actual == tbuf->count) {
411                         if (debuglevel >= DEBUG_LEVEL_INFO)     
412                                 printk("%s(%d)frame %p completed\n",
413                                         __FILE__,__LINE__,tbuf);
414                                         
415                         /* free current transmit buffer */
416                         n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
417                         
418                         /* this tx buffer is done */
419                         n_hdlc->tbuf = NULL;
420                         
421                         /* wait up sleeping writers */
422                         wake_up_interruptible(&tty->write_wait);
423         
424                         /* get next pending transmit buffer */
425                         tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
426                 } else {
427                         if (debuglevel >= DEBUG_LEVEL_INFO)     
428                                 printk("%s(%d)frame %p pending\n",
429                                         __FILE__,__LINE__,tbuf);
430                                         
431                         /* buffer not accepted by driver */
432                         /* set this buffer as pending buffer */
433                         n_hdlc->tbuf = tbuf;
434                         break;
435                 }
436         }
437         
438         if (!tbuf)
439                 tty->flags  &= ~(1 << TTY_DO_WRITE_WAKEUP);
440         
441         /* Clear the re-entry flag */
442         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
443         n_hdlc->tbusy = 0;
444         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); 
445         
446         if (n_hdlc->woke_up)
447           goto check_again;
448
449         if (debuglevel >= DEBUG_LEVEL_INFO)     
450                 printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
451                 
452 }       /* end of n_hdlc_send_frames() */
453
454 /**
455  * n_hdlc_tty_wakeup - Callback for transmit wakeup
456  * @tty - pointer to associated tty instance data
457  *
458  * Called when low level device driver can accept more send data.
459  */
460 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
461 {
462         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
463
464         if (debuglevel >= DEBUG_LEVEL_INFO)     
465                 printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
466                 
467         if (!n_hdlc)
468                 return;
469
470         if (tty != n_hdlc->tty) {
471                 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
472                 return;
473         }
474
475         n_hdlc_send_frames (n_hdlc, tty);
476                 
477 }       /* end of n_hdlc_tty_wakeup() */
478
479 /**
480  * n_hdlc_tty_receive - Called by tty driver when receive data is available
481  * @tty - pointer to tty instance data
482  * @data - pointer to received data
483  * @flags - pointer to flags for data
484  * @count - count of received data in bytes
485  *
486  * Called by tty low level driver when receive data is available. Data is
487  * interpreted as one HDLC frame.
488  */
489 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
490                                char *flags, int count)
491 {
492         register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
493         register struct n_hdlc_buf *buf;
494
495         if (debuglevel >= DEBUG_LEVEL_INFO)     
496                 printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
497                         __FILE__,__LINE__, count);
498                 
499         /* This can happen if stuff comes in on the backup tty */
500         if (n_hdlc == 0 || tty != n_hdlc->tty)
501                 return;
502                 
503         /* verify line is using HDLC discipline */
504         if (n_hdlc->magic != HDLC_MAGIC) {
505                 printk("%s(%d) line not using HDLC discipline\n",
506                         __FILE__,__LINE__);
507                 return;
508         }
509         
510         if ( count>maxframe ) {
511                 if (debuglevel >= DEBUG_LEVEL_INFO)     
512                         printk("%s(%d) rx count>maxframesize, data discarded\n",
513                                __FILE__,__LINE__);
514                 return;
515         }
516
517         /* get a free HDLC buffer */    
518         buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
519         if (!buf) {
520                 /* no buffers in free list, attempt to allocate another rx buffer */
521                 /* unless the maximum count has been reached */
522                 if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
523                         buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
524         }
525         
526         if (!buf) {
527                 if (debuglevel >= DEBUG_LEVEL_INFO)     
528                         printk("%s(%d) no more rx buffers, data discarded\n",
529                                __FILE__,__LINE__);
530                 return;
531         }
532                 
533         /* copy received data to HDLC buffer */
534         memcpy(buf->buf,data,count);
535         buf->count=count;
536
537         /* add HDLC buffer to list of received frames */
538         n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
539         
540         /* wake up any blocked reads and perform async signalling */
541         wake_up_interruptible (&tty->read_wait);
542         if (n_hdlc->tty->fasync != NULL)
543                 kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
544
545 }       /* end of n_hdlc_tty_receive() */
546
547 /**
548  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
549  * @tty - pointer to tty instance data
550  * @file - pointer to open file object
551  * @buf - pointer to returned data buffer
552  * @nr - size of returned data buffer
553  *      
554  * Returns the number of bytes returned or error code.
555  */
556 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
557                            __u8 __user *buf, size_t nr)
558 {
559         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
560         int ret;
561         struct n_hdlc_buf *rbuf;
562
563         if (debuglevel >= DEBUG_LEVEL_INFO)     
564                 printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
565                 
566         /* Validate the pointers */
567         if (!n_hdlc)
568                 return -EIO;
569
570         /* verify user access to buffer */
571         if (!access_ok(VERIFY_WRITE, buf, nr)) {
572                 printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
573                 "buffer\n", __FILE__, __LINE__);
574                 return -EFAULT;
575         }
576
577         for (;;) {
578                 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
579                         return -EIO;
580
581                 n_hdlc = tty2n_hdlc (tty);
582                 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
583                          tty != n_hdlc->tty)
584                         return 0;
585
586                 rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
587                 if (rbuf)
588                         break;
589                         
590                 /* no data */
591                 if (file->f_flags & O_NONBLOCK)
592                         return -EAGAIN;
593                         
594                 interruptible_sleep_on (&tty->read_wait);
595                 if (signal_pending(current))
596                         return -EINTR;
597         }
598                 
599         if (rbuf->count > nr)
600                 /* frame too large for caller's buffer (discard frame) */
601                 ret = -EOVERFLOW;
602         else {
603                 /* Copy the data to the caller's buffer */
604                 if (copy_to_user(buf, rbuf->buf, rbuf->count))
605                         ret = -EFAULT;
606                 else
607                         ret = rbuf->count;
608         }
609         
610         /* return HDLC buffer to free list unless the free list */
611         /* count has exceeded the default value, in which case the */
612         /* buffer is freed back to the OS to conserve memory */
613         if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT)
614                 kfree(rbuf);
615         else    
616                 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf);
617         
618         return ret;
619         
620 }       /* end of n_hdlc_tty_read() */
621
622 /**
623  * n_hdlc_tty_write - write a single frame of data to device
624  * @tty - pointer to associated tty device instance data
625  * @file - pointer to file object data
626  * @data - pointer to transmit data (one frame)
627  * @count - size of transmit frame in bytes
628  *              
629  * Returns the number of bytes written (or error code).
630  */
631 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
632                             const unsigned char *data, size_t count)
633 {
634         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
635         int error = 0;
636         DECLARE_WAITQUEUE(wait, current);
637         struct n_hdlc_buf *tbuf;
638
639         if (debuglevel >= DEBUG_LEVEL_INFO)     
640                 printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
641                         __FILE__,__LINE__,count);
642                 
643         /* Verify pointers */
644         if (!n_hdlc)
645                 return -EIO;
646
647         if (n_hdlc->magic != HDLC_MAGIC)
648                 return -EIO;
649
650         /* verify frame size */
651         if (count > maxframe ) {
652                 if (debuglevel & DEBUG_LEVEL_INFO)
653                         printk (KERN_WARNING
654                                 "n_hdlc_tty_write: truncating user packet "
655                                 "from %lu to %d\n", (unsigned long) count,
656                                 maxframe );
657                 count = maxframe;
658         }
659         
660         add_wait_queue(&tty->write_wait, &wait);
661         set_current_state(TASK_INTERRUPTIBLE);
662         
663         /* Allocate transmit buffer */
664         /* sleep until transmit buffer available */             
665         while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) {
666                 schedule();
667                         
668                 n_hdlc = tty2n_hdlc (tty);
669                 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || 
670                     tty != n_hdlc->tty) {
671                         printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
672                         error = -EIO;
673                         break;
674                 }
675                         
676                 if (signal_pending(current)) {
677                         error = -EINTR;
678                         break;
679                 }
680         }
681
682         set_current_state(TASK_RUNNING);
683         remove_wait_queue(&tty->write_wait, &wait);
684
685         if (!error) {           
686                 /* Retrieve the user's buffer */
687                 memcpy(tbuf->buf, data, count);
688
689                 /* Send the data */
690                 tbuf->count = error = count;
691                 n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
692                 n_hdlc_send_frames(n_hdlc,tty);
693         }
694
695         return error;
696         
697 }       /* end of n_hdlc_tty_write() */
698
699 /**
700  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
701  * @tty - pointer to tty instance data
702  * @file - pointer to open file object for device
703  * @cmd - IOCTL command code
704  * @arg - argument for IOCTL call (cmd dependent)
705  *
706  * Returns command dependent result.
707  */
708 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
709                             unsigned int cmd, unsigned long arg)
710 {
711         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
712         int error = 0;
713         int count;
714         unsigned long flags;
715         
716         if (debuglevel >= DEBUG_LEVEL_INFO)     
717                 printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
718                         __FILE__,__LINE__,cmd);
719                 
720         /* Verify the status of the device */
721         if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
722                 return -EBADF;
723
724         switch (cmd) {
725         case FIONREAD:
726                 /* report count of read data available */
727                 /* in next available frame (if any) */
728                 spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
729                 if (n_hdlc->rx_buf_list.head)
730                         count = n_hdlc->rx_buf_list.head->count;
731                 else
732                         count = 0;
733                 spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
734                 error = put_user(count, (int __user *)arg);
735                 break;
736
737         case TIOCOUTQ:
738                 /* get the pending tx byte count in the driver */
739                 count = tty->driver->chars_in_buffer ?
740                                 tty->driver->chars_in_buffer(tty) : 0;
741                 /* add size of next output frame in queue */
742                 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
743                 if (n_hdlc->tx_buf_list.head)
744                         count += n_hdlc->tx_buf_list.head->count;
745                 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
746                 error = put_user(count, (int __user *)arg);
747                 break;
748
749         default:
750                 error = n_tty_ioctl (tty, file, cmd, arg);
751                 break;
752         }
753         return error;
754         
755 }       /* end of n_hdlc_tty_ioctl() */
756
757 /**
758  * n_hdlc_tty_poll - TTY callback for poll system call
759  * @tty - pointer to tty instance data
760  * @filp - pointer to open file object for device
761  * @poll_table - wait queue for operations
762  * 
763  * Determine which operations (read/write) will not block and return info
764  * to caller.
765  * Returns a bit mask containing info on which ops will not block.
766  */
767 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
768                                     poll_table *wait)
769 {
770         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
771         unsigned int mask = 0;
772
773         if (debuglevel >= DEBUG_LEVEL_INFO)     
774                 printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
775                 
776         if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
777                 /* queue current process into any wait queue that */
778                 /* may awaken in the future (read and write) */
779
780                 poll_wait(filp, &tty->read_wait, wait);
781                 poll_wait(filp, &tty->write_wait, wait);
782
783                 /* set bits for operations that won't block */
784                 if(n_hdlc->rx_buf_list.head)
785                         mask |= POLLIN | POLLRDNORM;    /* readable */
786                 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
787                         mask |= POLLHUP;
788                 if(tty_hung_up_p(filp))
789                         mask |= POLLHUP;
790                 if(n_hdlc->tx_free_buf_list.head)
791                         mask |= POLLOUT | POLLWRNORM;   /* writable */
792         }
793         return mask;
794 }       /* end of n_hdlc_tty_poll() */
795
796 /**
797  * n_hdlc_alloc - allocate an n_hdlc instance data structure
798  *
799  * Returns a pointer to newly created structure if success, otherwise %NULL
800  */
801 static struct n_hdlc *n_hdlc_alloc(void)
802 {
803         struct n_hdlc_buf *buf;
804         int i;
805         struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
806
807         if (!n_hdlc)
808                 return NULL;
809
810         memset(n_hdlc, 0, sizeof(*n_hdlc));
811
812         n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
813         n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
814         n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
815         n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
816         
817         /* allocate free rx buffer list */
818         for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
819                 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
820                 if (buf)
821                         n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
822                 else if (debuglevel >= DEBUG_LEVEL_INFO)        
823                         printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
824         }
825         
826         /* allocate free tx buffer list */
827         for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
828                 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
829                 if (buf)
830                         n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
831                 else if (debuglevel >= DEBUG_LEVEL_INFO)        
832                         printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
833         }
834         
835         /* Initialize the control block */
836         n_hdlc->magic  = HDLC_MAGIC;
837         n_hdlc->flags  = 0;
838         
839         return n_hdlc;
840         
841 }       /* end of n_hdlc_alloc() */
842
843 /**
844  * n_hdlc_buf_list_init - initialize specified HDLC buffer list
845  * @list - pointer to buffer list
846  */
847 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
848 {
849         memset(list, 0, sizeof(*list));
850         spin_lock_init(&list->spinlock);
851 }       /* end of n_hdlc_buf_list_init() */
852
853 /**
854  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
855  * @list - pointer to buffer list
856  * @buf - pointer to buffer
857  */
858 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
859                            struct n_hdlc_buf *buf)
860 {
861         unsigned long flags;
862         spin_lock_irqsave(&list->spinlock,flags);
863         
864         buf->link=NULL;
865         if(list->tail)
866                 list->tail->link = buf;
867         else
868                 list->head = buf;
869         list->tail = buf;
870         (list->count)++;
871         
872         spin_unlock_irqrestore(&list->spinlock,flags);
873         
874 }       /* end of n_hdlc_buf_put() */
875
876 /**
877  * n_hdlc_buf_get - remove and return an HDLC buffer from list
878  * @list - pointer to HDLC buffer list
879  * 
880  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
881  * list.
882  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
883  */
884 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
885 {
886         unsigned long flags;
887         struct n_hdlc_buf *buf;
888         spin_lock_irqsave(&list->spinlock,flags);
889         
890         buf = list->head;
891         if (buf) {
892                 list->head = buf->link;
893                 (list->count)--;
894         }
895         if (!list->head)
896                 list->tail = NULL;
897         
898         spin_unlock_irqrestore(&list->spinlock,flags);
899         return buf;
900         
901 }       /* end of n_hdlc_buf_get() */
902
903 static char hdlc_banner[] __initdata =
904         KERN_INFO "HDLC line discipline: version " HDLC_VERSION
905         ", maxframe=%u\n";
906 static char hdlc_register_ok[] __initdata =
907         KERN_INFO "N_HDLC line discipline registered.\n";
908 static char hdlc_register_fail[] __initdata =
909         KERN_ERR "error registering line discipline: %d\n";
910 static char hdlc_init_fail[] __initdata =
911         KERN_INFO "N_HDLC: init failure %d\n";
912
913 static int __init n_hdlc_init(void)
914 {
915         int status;
916
917         /* range check maxframe arg */
918         if (maxframe < 4096)
919                 maxframe = 4096;
920         else if (maxframe > 65535)
921                 maxframe = 65535;
922
923         printk(hdlc_banner, maxframe);
924
925         status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
926         if (!status)
927                 printk(hdlc_register_ok);
928         else
929                 printk(hdlc_register_fail, status);
930
931         if (status)
932                 printk(hdlc_init_fail, status);
933         return status;
934         
935 }       /* end of init_module() */
936
937 static char hdlc_unregister_ok[] __exitdata =
938         KERN_INFO "N_HDLC: line discipline unregistered\n";
939 static char hdlc_unregister_fail[] __exitdata =
940         KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
941
942 static void __exit n_hdlc_exit(void)
943 {
944         /* Release tty registration of line discipline */
945         int status = tty_unregister_ldisc(N_HDLC);
946
947         if (status)
948                 printk(hdlc_unregister_fail, status);
949         else
950                 printk(hdlc_unregister_ok);
951 }
952
953 module_init(n_hdlc_init);
954 module_exit(n_hdlc_exit);
955
956 MODULE_LICENSE("GPL");
957 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
958 module_param(debuglevel, int, 0);
959 module_param(maxframe, int, 0);
960 MODULE_ALIAS_LDISC(N_HDLC);