ath9k: Fixed RX decryption status reporting
[linux-2.6] / drivers / char / n_hdlc.c
1 /* generic HDLC line discipline for Linux
2  *
3  * Written by Paul Fulghum paulkf@microgate.com
4  * for Microgate Corporation
5  *
6  * Microgate and SyncLink are registered trademarks of Microgate Corporation
7  *
8  * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9  *      Al Longyear <longyear@netcom.com>,
10  *      Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
11  *
12  * Original release 01/11/99
13  * $Id: n_hdlc.c,v 4.8 2003/05/06 21:18:51 paulkf Exp $
14  *
15  * This code is released under the GNU General Public License (GPL)
16  *
17  * This module implements the tty line discipline N_HDLC for use with
18  * tty device drivers that support bit-synchronous HDLC communications.
19  *
20  * All HDLC data is frame oriented which means:
21  *
22  * 1. tty write calls represent one complete transmit frame of data
23  *    The device driver should accept the complete frame or none of 
24  *    the frame (busy) in the write method. Each write call should have
25  *    a byte count in the range of 2-65535 bytes (2 is min HDLC frame
26  *    with 1 addr byte and 1 ctrl byte). The max byte count of 65535
27  *    should include any crc bytes required. For example, when using
28  *    CCITT CRC32, 4 crc bytes are required, so the maximum size frame
29  *    the application may transmit is limited to 65531 bytes. For CCITT
30  *    CRC16, the maximum application frame size would be 65533.
31  *
32  *
33  * 2. receive callbacks from the device driver represents
34  *    one received frame. The device driver should bypass
35  *    the tty flip buffer and call the line discipline receive
36  *    callback directly to avoid fragmenting or concatenating
37  *    multiple frames into a single receive callback.
38  *
39  *    The HDLC line discipline queues the receive frames in separate
40  *    buffers so complete receive frames can be returned by the
41  *    tty read calls.
42  *
43  * 3. tty read calls returns an entire frame of data or nothing.
44  *    
45  * 4. all send and receive data is considered raw. No processing
46  *    or translation is performed by the line discipline, regardless
47  *    of the tty flags
48  *
49  * 5. When line discipline is queried for the amount of receive
50  *    data available (FIOC), 0 is returned if no data available,
51  *    otherwise the count of the next available frame is returned.
52  *    (instead of the sum of all received frame counts).
53  *
54  * These conventions allow the standard tty programming interface
55  * to be used for synchronous HDLC applications when used with
56  * this line discipline (or another line discipline that is frame
57  * oriented such as N_PPP).
58  *
59  * The SyncLink driver (synclink.c) implements both asynchronous
60  * (using standard line discipline N_TTY) and synchronous HDLC
61  * (using N_HDLC) communications, with the latter using the above
62  * conventions.
63  *
64  * This implementation is very basic and does not maintain
65  * any statistics. The main point is to enforce the raw data
66  * and frame orientation of HDLC communications.
67  *
68  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
69  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
70  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
71  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
72  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
73  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
74  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
75  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
76  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
77  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
78  * OF THE POSSIBILITY OF SUCH DAMAGE.
79  */
80
81 #define HDLC_MAGIC 0x239e
82 #define HDLC_VERSION "$Revision: 4.8 $"
83
84 #include <linux/module.h>
85 #include <linux/init.h>
86 #include <linux/kernel.h>
87 #include <linux/sched.h>
88 #include <linux/types.h>
89 #include <linux/fcntl.h>
90 #include <linux/interrupt.h>
91 #include <linux/ptrace.h>
92
93 #undef VERSION
94 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
95
96 #include <linux/poll.h>
97 #include <linux/in.h>
98 #include <linux/ioctl.h>
99 #include <linux/slab.h>
100 #include <linux/tty.h>
101 #include <linux/errno.h>
102 #include <linux/string.h>       /* used in new tty drivers */
103 #include <linux/signal.h>       /* used in new tty drivers */
104 #include <linux/if.h>
105 #include <linux/bitops.h>
106
107 #include <asm/system.h>
108 #include <asm/termios.h>
109 #include <asm/uaccess.h>
110
111 /*
112  * Buffers for individual HDLC frames
113  */
114 #define MAX_HDLC_FRAME_SIZE 65535 
115 #define DEFAULT_RX_BUF_COUNT 10
116 #define MAX_RX_BUF_COUNT 60
117 #define DEFAULT_TX_BUF_COUNT 1
118
119 struct n_hdlc_buf {
120         struct n_hdlc_buf *link;
121         int               count;
122         char              buf[1];
123 };
124
125 #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe)
126
127 struct n_hdlc_buf_list {
128         struct n_hdlc_buf *head;
129         struct n_hdlc_buf *tail;
130         int               count;
131         spinlock_t        spinlock;
132 };
133
134 /**
135  * struct n_hdlc - per device instance data structure
136  * @magic - magic value for structure
137  * @flags - miscellaneous control flags
138  * @tty - ptr to TTY structure
139  * @backup_tty - TTY to use if tty gets closed
140  * @tbusy - reentrancy flag for tx wakeup code
141  * @woke_up - FIXME: describe this field
142  * @tbuf - currently transmitting tx buffer
143  * @tx_buf_list - list of pending transmit frame buffers
144  * @rx_buf_list - list of received frame buffers
145  * @tx_free_buf_list - list unused transmit frame buffers
146  * @rx_free_buf_list - list unused received frame buffers
147  */
148 struct n_hdlc {
149         int                     magic;
150         __u32                   flags;
151         struct tty_struct       *tty;
152         struct tty_struct       *backup_tty;
153         int                     tbusy;
154         int                     woke_up;
155         struct n_hdlc_buf       *tbuf;
156         struct n_hdlc_buf_list  tx_buf_list;
157         struct n_hdlc_buf_list  rx_buf_list;
158         struct n_hdlc_buf_list  tx_free_buf_list;
159         struct n_hdlc_buf_list  rx_free_buf_list;
160 };
161
162 /*
163  * HDLC buffer list manipulation functions
164  */
165 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
166 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
167                            struct n_hdlc_buf *buf);
168 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
169
170 /* Local functions */
171
172 static struct n_hdlc *n_hdlc_alloc (void);
173
174 /* debug level can be set by insmod for debugging purposes */
175 #define DEBUG_LEVEL_INFO        1
176 static int debuglevel;
177
178 /* max frame size for memory allocations */
179 static int maxframe = 4096;
180
181 /* TTY callbacks */
182
183 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
184                            __u8 __user *buf, size_t nr);
185 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
186                             const unsigned char *buf, size_t nr);
187 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
188                             unsigned int cmd, unsigned long arg);
189 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
190                                     poll_table *wait);
191 static int n_hdlc_tty_open(struct tty_struct *tty);
192 static void n_hdlc_tty_close(struct tty_struct *tty);
193 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
194                                char *fp, int count);
195 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
196
197 #define bset(p,b)       ((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
198
199 #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
200 #define n_hdlc2tty(n_hdlc)      ((n_hdlc)->tty)
201
202 static struct tty_ldisc_ops n_hdlc_ldisc = {
203         .owner          = THIS_MODULE,
204         .magic          = TTY_LDISC_MAGIC,
205         .name           = "hdlc",
206         .open           = n_hdlc_tty_open,
207         .close          = n_hdlc_tty_close,
208         .read           = n_hdlc_tty_read,
209         .write          = n_hdlc_tty_write,
210         .ioctl          = n_hdlc_tty_ioctl,
211         .poll           = n_hdlc_tty_poll,
212         .receive_buf    = n_hdlc_tty_receive,
213         .write_wakeup   = n_hdlc_tty_wakeup,
214 };
215
216 /**
217  * n_hdlc_release - release an n_hdlc per device line discipline info structure
218  * @n_hdlc - per device line discipline info structure
219  */
220 static void n_hdlc_release(struct n_hdlc *n_hdlc)
221 {
222         struct tty_struct *tty = n_hdlc2tty (n_hdlc);
223         struct n_hdlc_buf *buf;
224         
225         if (debuglevel >= DEBUG_LEVEL_INFO)     
226                 printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
227                 
228         /* Ensure that the n_hdlcd process is not hanging on select()/poll() */
229         wake_up_interruptible (&tty->read_wait);
230         wake_up_interruptible (&tty->write_wait);
231
232         if (tty->disc_data == n_hdlc)
233                 tty->disc_data = NULL;  /* Break the tty->n_hdlc link */
234
235         /* Release transmit and receive buffers */
236         for(;;) {
237                 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
238                 if (buf) {
239                         kfree(buf);
240                 } else
241                         break;
242         }
243         for(;;) {
244                 buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
245                 if (buf) {
246                         kfree(buf);
247                 } else
248                         break;
249         }
250         for(;;) {
251                 buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
252                 if (buf) {
253                         kfree(buf);
254                 } else
255                         break;
256         }
257         for(;;) {
258                 buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
259                 if (buf) {
260                         kfree(buf);
261                 } else
262                         break;
263         }
264         kfree(n_hdlc->tbuf);
265         kfree(n_hdlc);
266         
267 }       /* end of n_hdlc_release() */
268
269 /**
270  * n_hdlc_tty_close - line discipline close
271  * @tty - pointer to tty info structure
272  *
273  * Called when the line discipline is changed to something
274  * else, the tty is closed, or the tty detects a hangup.
275  */
276 static void n_hdlc_tty_close(struct tty_struct *tty)
277 {
278         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
279
280         if (debuglevel >= DEBUG_LEVEL_INFO)     
281                 printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
282                 
283         if (n_hdlc != NULL) {
284                 if (n_hdlc->magic != HDLC_MAGIC) {
285                         printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
286                         return;
287                 }
288 #if defined(TTY_NO_WRITE_SPLIT)
289                 clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
290 #endif
291                 tty->disc_data = NULL;
292                 if (tty == n_hdlc->backup_tty)
293                         n_hdlc->backup_tty = NULL;
294                 if (tty != n_hdlc->tty)
295                         return;
296                 if (n_hdlc->backup_tty) {
297                         n_hdlc->tty = n_hdlc->backup_tty;
298                 } else {
299                         n_hdlc_release (n_hdlc);
300                 }
301         }
302         
303         if (debuglevel >= DEBUG_LEVEL_INFO)     
304                 printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
305                 
306 }       /* end of n_hdlc_tty_close() */
307
308 /**
309  * n_hdlc_tty_open - called when line discipline changed to n_hdlc
310  * @tty - pointer to tty info structure
311  *
312  * Returns 0 if success, otherwise error code
313  */
314 static int n_hdlc_tty_open (struct tty_struct *tty)
315 {
316         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
317
318         if (debuglevel >= DEBUG_LEVEL_INFO)     
319                 printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
320                 __FILE__,__LINE__,
321                 tty->name);
322                 
323         /* There should not be an existing table for this slot. */
324         if (n_hdlc) {
325                 printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
326                 return -EEXIST;
327         }
328         
329         n_hdlc = n_hdlc_alloc();
330         if (!n_hdlc) {
331                 printk (KERN_ERR "n_hdlc_alloc failed\n");
332                 return -ENFILE;
333         }
334                 
335         tty->disc_data = n_hdlc;
336         n_hdlc->tty    = tty;
337         tty->receive_room = 65536;
338         
339 #if defined(TTY_NO_WRITE_SPLIT)
340         /* change tty_io write() to not split large writes into 8K chunks */
341         set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
342 #endif
343         
344         /* Flush any pending characters in the driver and discipline. */
345         if (tty->ldisc.ops->flush_buffer)
346                 tty->ldisc.ops->flush_buffer(tty);
347
348         tty_driver_flush_buffer(tty);
349                 
350         if (debuglevel >= DEBUG_LEVEL_INFO)     
351                 printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
352                 
353         return 0;
354         
355 }       /* end of n_tty_hdlc_open() */
356
357 /**
358  * n_hdlc_send_frames - send frames on pending send buffer list
359  * @n_hdlc - pointer to ldisc instance data
360  * @tty - pointer to tty instance data
361  *
362  * Send frames on pending send buffer list until the driver does not accept a
363  * frame (busy) this function is called after adding a frame to the send buffer
364  * list and by the tty wakeup callback.
365  */
366 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
367 {
368         register int actual;
369         unsigned long flags;
370         struct n_hdlc_buf *tbuf;
371
372         if (debuglevel >= DEBUG_LEVEL_INFO)     
373                 printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
374  check_again:
375                 
376         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
377         if (n_hdlc->tbusy) {
378                 n_hdlc->woke_up = 1;
379                 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
380                 return;
381         }
382         n_hdlc->tbusy = 1;
383         n_hdlc->woke_up = 0;
384         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
385
386         /* get current transmit buffer or get new transmit */
387         /* buffer from list of pending transmit buffers */
388                 
389         tbuf = n_hdlc->tbuf;
390         if (!tbuf)
391                 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
392                 
393         while (tbuf) {
394                 if (debuglevel >= DEBUG_LEVEL_INFO)     
395                         printk("%s(%d)sending frame %p, count=%d\n",
396                                 __FILE__,__LINE__,tbuf,tbuf->count);
397                         
398                 /* Send the next block of data to device */
399                 tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
400                 actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
401
402                 /* rollback was possible and has been done */
403                 if (actual == -ERESTARTSYS) {
404                         n_hdlc->tbuf = tbuf;
405                         break;
406                 }
407                 /* if transmit error, throw frame away by */
408                 /* pretending it was accepted by driver */
409                 if (actual < 0)
410                         actual = tbuf->count;
411                 
412                 if (actual == tbuf->count) {
413                         if (debuglevel >= DEBUG_LEVEL_INFO)     
414                                 printk("%s(%d)frame %p completed\n",
415                                         __FILE__,__LINE__,tbuf);
416                                         
417                         /* free current transmit buffer */
418                         n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
419                         
420                         /* this tx buffer is done */
421                         n_hdlc->tbuf = NULL;
422                         
423                         /* wait up sleeping writers */
424                         wake_up_interruptible(&tty->write_wait);
425         
426                         /* get next pending transmit buffer */
427                         tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
428                 } else {
429                         if (debuglevel >= DEBUG_LEVEL_INFO)     
430                                 printk("%s(%d)frame %p pending\n",
431                                         __FILE__,__LINE__,tbuf);
432                                         
433                         /* buffer not accepted by driver */
434                         /* set this buffer as pending buffer */
435                         n_hdlc->tbuf = tbuf;
436                         break;
437                 }
438         }
439         
440         if (!tbuf)
441                 tty->flags  &= ~(1 << TTY_DO_WRITE_WAKEUP);
442         
443         /* Clear the re-entry flag */
444         spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
445         n_hdlc->tbusy = 0;
446         spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); 
447         
448         if (n_hdlc->woke_up)
449           goto check_again;
450
451         if (debuglevel >= DEBUG_LEVEL_INFO)     
452                 printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
453                 
454 }       /* end of n_hdlc_send_frames() */
455
456 /**
457  * n_hdlc_tty_wakeup - Callback for transmit wakeup
458  * @tty - pointer to associated tty instance data
459  *
460  * Called when low level device driver can accept more send data.
461  */
462 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
463 {
464         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
465
466         if (debuglevel >= DEBUG_LEVEL_INFO)     
467                 printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
468                 
469         if (!n_hdlc)
470                 return;
471
472         if (tty != n_hdlc->tty) {
473                 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
474                 return;
475         }
476
477         n_hdlc_send_frames (n_hdlc, tty);
478                 
479 }       /* end of n_hdlc_tty_wakeup() */
480
481 /**
482  * n_hdlc_tty_receive - Called by tty driver when receive data is available
483  * @tty - pointer to tty instance data
484  * @data - pointer to received data
485  * @flags - pointer to flags for data
486  * @count - count of received data in bytes
487  *
488  * Called by tty low level driver when receive data is available. Data is
489  * interpreted as one HDLC frame.
490  */
491 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
492                                char *flags, int count)
493 {
494         register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
495         register struct n_hdlc_buf *buf;
496
497         if (debuglevel >= DEBUG_LEVEL_INFO)     
498                 printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
499                         __FILE__,__LINE__, count);
500                 
501         /* This can happen if stuff comes in on the backup tty */
502         if (!n_hdlc || tty != n_hdlc->tty)
503                 return;
504                 
505         /* verify line is using HDLC discipline */
506         if (n_hdlc->magic != HDLC_MAGIC) {
507                 printk("%s(%d) line not using HDLC discipline\n",
508                         __FILE__,__LINE__);
509                 return;
510         }
511         
512         if ( count>maxframe ) {
513                 if (debuglevel >= DEBUG_LEVEL_INFO)     
514                         printk("%s(%d) rx count>maxframesize, data discarded\n",
515                                __FILE__,__LINE__);
516                 return;
517         }
518
519         /* get a free HDLC buffer */    
520         buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
521         if (!buf) {
522                 /* no buffers in free list, attempt to allocate another rx buffer */
523                 /* unless the maximum count has been reached */
524                 if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
525                         buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
526         }
527         
528         if (!buf) {
529                 if (debuglevel >= DEBUG_LEVEL_INFO)     
530                         printk("%s(%d) no more rx buffers, data discarded\n",
531                                __FILE__,__LINE__);
532                 return;
533         }
534                 
535         /* copy received data to HDLC buffer */
536         memcpy(buf->buf,data,count);
537         buf->count=count;
538
539         /* add HDLC buffer to list of received frames */
540         n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
541         
542         /* wake up any blocked reads and perform async signalling */
543         wake_up_interruptible (&tty->read_wait);
544         if (n_hdlc->tty->fasync != NULL)
545                 kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
546
547 }       /* end of n_hdlc_tty_receive() */
548
549 /**
550  * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
551  * @tty - pointer to tty instance data
552  * @file - pointer to open file object
553  * @buf - pointer to returned data buffer
554  * @nr - size of returned data buffer
555  *      
556  * Returns the number of bytes returned or error code.
557  */
558 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
559                            __u8 __user *buf, size_t nr)
560 {
561         struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
562         int ret;
563         struct n_hdlc_buf *rbuf;
564
565         if (debuglevel >= DEBUG_LEVEL_INFO)     
566                 printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
567                 
568         /* Validate the pointers */
569         if (!n_hdlc)
570                 return -EIO;
571
572         /* verify user access to buffer */
573         if (!access_ok(VERIFY_WRITE, buf, nr)) {
574                 printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
575                 "buffer\n", __FILE__, __LINE__);
576                 return -EFAULT;
577         }
578
579         lock_kernel();
580
581         for (;;) {
582                 if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
583                         unlock_kernel();
584                         return -EIO;
585                 }
586
587                 n_hdlc = tty2n_hdlc (tty);
588                 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
589                          tty != n_hdlc->tty) {
590                         unlock_kernel();
591                         return 0;
592                 }
593
594                 rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
595                 if (rbuf)
596                         break;
597                         
598                 /* no data */
599                 if (file->f_flags & O_NONBLOCK) {
600                         unlock_kernel();
601                         return -EAGAIN;
602                 }
603                         
604                 interruptible_sleep_on (&tty->read_wait);
605                 if (signal_pending(current)) {
606                         unlock_kernel();
607                         return -EINTR;
608                 }
609         }
610                 
611         if (rbuf->count > nr)
612                 /* frame too large for caller's buffer (discard frame) */
613                 ret = -EOVERFLOW;
614         else {
615                 /* Copy the data to the caller's buffer */
616                 if (copy_to_user(buf, rbuf->buf, rbuf->count))
617                         ret = -EFAULT;
618                 else
619                         ret = rbuf->count;
620         }
621         
622         /* return HDLC buffer to free list unless the free list */
623         /* count has exceeded the default value, in which case the */
624         /* buffer is freed back to the OS to conserve memory */
625         if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT)
626                 kfree(rbuf);
627         else    
628                 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf);
629         unlock_kernel();
630         return ret;
631         
632 }       /* end of n_hdlc_tty_read() */
633
634 /**
635  * n_hdlc_tty_write - write a single frame of data to device
636  * @tty - pointer to associated tty device instance data
637  * @file - pointer to file object data
638  * @data - pointer to transmit data (one frame)
639  * @count - size of transmit frame in bytes
640  *              
641  * Returns the number of bytes written (or error code).
642  */
643 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
644                             const unsigned char *data, size_t count)
645 {
646         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
647         int error = 0;
648         DECLARE_WAITQUEUE(wait, current);
649         struct n_hdlc_buf *tbuf;
650
651         if (debuglevel >= DEBUG_LEVEL_INFO)     
652                 printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
653                         __FILE__,__LINE__,count);
654                 
655         /* Verify pointers */
656         if (!n_hdlc)
657                 return -EIO;
658
659         if (n_hdlc->magic != HDLC_MAGIC)
660                 return -EIO;
661
662         /* verify frame size */
663         if (count > maxframe ) {
664                 if (debuglevel & DEBUG_LEVEL_INFO)
665                         printk (KERN_WARNING
666                                 "n_hdlc_tty_write: truncating user packet "
667                                 "from %lu to %d\n", (unsigned long) count,
668                                 maxframe );
669                 count = maxframe;
670         }
671         
672         lock_kernel();
673
674         add_wait_queue(&tty->write_wait, &wait);
675         set_current_state(TASK_INTERRUPTIBLE);
676         
677         /* Allocate transmit buffer */
678         /* sleep until transmit buffer available */             
679         while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) {
680                 if (file->f_flags & O_NONBLOCK) {
681                         error = -EAGAIN;
682                         break;
683                 }
684                 schedule();
685                         
686                 n_hdlc = tty2n_hdlc (tty);
687                 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || 
688                     tty != n_hdlc->tty) {
689                         printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
690                         error = -EIO;
691                         break;
692                 }
693                         
694                 if (signal_pending(current)) {
695                         error = -EINTR;
696                         break;
697                 }
698         }
699
700         set_current_state(TASK_RUNNING);
701         remove_wait_queue(&tty->write_wait, &wait);
702
703         if (!error) {           
704                 /* Retrieve the user's buffer */
705                 memcpy(tbuf->buf, data, count);
706
707                 /* Send the data */
708                 tbuf->count = error = count;
709                 n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
710                 n_hdlc_send_frames(n_hdlc,tty);
711         }
712         unlock_kernel();
713         return error;
714         
715 }       /* end of n_hdlc_tty_write() */
716
717 /**
718  * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
719  * @tty - pointer to tty instance data
720  * @file - pointer to open file object for device
721  * @cmd - IOCTL command code
722  * @arg - argument for IOCTL call (cmd dependent)
723  *
724  * Returns command dependent result.
725  */
726 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
727                             unsigned int cmd, unsigned long arg)
728 {
729         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
730         int error = 0;
731         int count;
732         unsigned long flags;
733         
734         if (debuglevel >= DEBUG_LEVEL_INFO)     
735                 printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
736                         __FILE__,__LINE__,cmd);
737                 
738         /* Verify the status of the device */
739         if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
740                 return -EBADF;
741
742         switch (cmd) {
743         case FIONREAD:
744                 /* report count of read data available */
745                 /* in next available frame (if any) */
746                 spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
747                 if (n_hdlc->rx_buf_list.head)
748                         count = n_hdlc->rx_buf_list.head->count;
749                 else
750                         count = 0;
751                 spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
752                 error = put_user(count, (int __user *)arg);
753                 break;
754
755         case TIOCOUTQ:
756                 /* get the pending tx byte count in the driver */
757                 count = tty_chars_in_buffer(tty);
758                 /* add size of next output frame in queue */
759                 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
760                 if (n_hdlc->tx_buf_list.head)
761                         count += n_hdlc->tx_buf_list.head->count;
762                 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
763                 error = put_user(count, (int __user *)arg);
764                 break;
765
766         default:
767                 error = n_tty_ioctl_helper(tty, file, cmd, arg);
768                 break;
769         }
770         return error;
771         
772 }       /* end of n_hdlc_tty_ioctl() */
773
774 /**
775  * n_hdlc_tty_poll - TTY callback for poll system call
776  * @tty - pointer to tty instance data
777  * @filp - pointer to open file object for device
778  * @poll_table - wait queue for operations
779  * 
780  * Determine which operations (read/write) will not block and return info
781  * to caller.
782  * Returns a bit mask containing info on which ops will not block.
783  */
784 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
785                                     poll_table *wait)
786 {
787         struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
788         unsigned int mask = 0;
789
790         if (debuglevel >= DEBUG_LEVEL_INFO)     
791                 printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
792                 
793         if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
794                 /* queue current process into any wait queue that */
795                 /* may awaken in the future (read and write) */
796
797                 poll_wait(filp, &tty->read_wait, wait);
798                 poll_wait(filp, &tty->write_wait, wait);
799
800                 /* set bits for operations that won't block */
801                 if (n_hdlc->rx_buf_list.head)
802                         mask |= POLLIN | POLLRDNORM;    /* readable */
803                 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
804                         mask |= POLLHUP;
805                 if (tty_hung_up_p(filp))
806                         mask |= POLLHUP;
807                 if (!tty_is_writelocked(tty) &&
808                                 n_hdlc->tx_free_buf_list.head)
809                         mask |= POLLOUT | POLLWRNORM;   /* writable */
810         }
811         return mask;
812 }       /* end of n_hdlc_tty_poll() */
813
814 /**
815  * n_hdlc_alloc - allocate an n_hdlc instance data structure
816  *
817  * Returns a pointer to newly created structure if success, otherwise %NULL
818  */
819 static struct n_hdlc *n_hdlc_alloc(void)
820 {
821         struct n_hdlc_buf *buf;
822         int i;
823         struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
824
825         if (!n_hdlc)
826                 return NULL;
827
828         memset(n_hdlc, 0, sizeof(*n_hdlc));
829
830         n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
831         n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
832         n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
833         n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
834         
835         /* allocate free rx buffer list */
836         for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
837                 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
838                 if (buf)
839                         n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
840                 else if (debuglevel >= DEBUG_LEVEL_INFO)        
841                         printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
842         }
843         
844         /* allocate free tx buffer list */
845         for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
846                 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
847                 if (buf)
848                         n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
849                 else if (debuglevel >= DEBUG_LEVEL_INFO)        
850                         printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
851         }
852         
853         /* Initialize the control block */
854         n_hdlc->magic  = HDLC_MAGIC;
855         n_hdlc->flags  = 0;
856         
857         return n_hdlc;
858         
859 }       /* end of n_hdlc_alloc() */
860
861 /**
862  * n_hdlc_buf_list_init - initialize specified HDLC buffer list
863  * @list - pointer to buffer list
864  */
865 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
866 {
867         memset(list, 0, sizeof(*list));
868         spin_lock_init(&list->spinlock);
869 }       /* end of n_hdlc_buf_list_init() */
870
871 /**
872  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
873  * @list - pointer to buffer list
874  * @buf - pointer to buffer
875  */
876 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
877                            struct n_hdlc_buf *buf)
878 {
879         unsigned long flags;
880         spin_lock_irqsave(&list->spinlock,flags);
881         
882         buf->link=NULL;
883         if (list->tail)
884                 list->tail->link = buf;
885         else
886                 list->head = buf;
887         list->tail = buf;
888         (list->count)++;
889         
890         spin_unlock_irqrestore(&list->spinlock,flags);
891         
892 }       /* end of n_hdlc_buf_put() */
893
894 /**
895  * n_hdlc_buf_get - remove and return an HDLC buffer from list
896  * @list - pointer to HDLC buffer list
897  * 
898  * Remove and return an HDLC buffer from the head of the specified HDLC buffer
899  * list.
900  * Returns a pointer to HDLC buffer if available, otherwise %NULL.
901  */
902 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
903 {
904         unsigned long flags;
905         struct n_hdlc_buf *buf;
906         spin_lock_irqsave(&list->spinlock,flags);
907         
908         buf = list->head;
909         if (buf) {
910                 list->head = buf->link;
911                 (list->count)--;
912         }
913         if (!list->head)
914                 list->tail = NULL;
915         
916         spin_unlock_irqrestore(&list->spinlock,flags);
917         return buf;
918         
919 }       /* end of n_hdlc_buf_get() */
920
921 static char hdlc_banner[] __initdata =
922         KERN_INFO "HDLC line discipline: version " HDLC_VERSION
923         ", maxframe=%u\n";
924 static char hdlc_register_ok[] __initdata =
925         KERN_INFO "N_HDLC line discipline registered.\n";
926 static char hdlc_register_fail[] __initdata =
927         KERN_ERR "error registering line discipline: %d\n";
928 static char hdlc_init_fail[] __initdata =
929         KERN_INFO "N_HDLC: init failure %d\n";
930
931 static int __init n_hdlc_init(void)
932 {
933         int status;
934
935         /* range check maxframe arg */
936         if (maxframe < 4096)
937                 maxframe = 4096;
938         else if (maxframe > 65535)
939                 maxframe = 65535;
940
941         printk(hdlc_banner, maxframe);
942
943         status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
944         if (!status)
945                 printk(hdlc_register_ok);
946         else
947                 printk(hdlc_register_fail, status);
948
949         if (status)
950                 printk(hdlc_init_fail, status);
951         return status;
952         
953 }       /* end of init_module() */
954
955 static char hdlc_unregister_ok[] __exitdata =
956         KERN_INFO "N_HDLC: line discipline unregistered\n";
957 static char hdlc_unregister_fail[] __exitdata =
958         KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
959
960 static void __exit n_hdlc_exit(void)
961 {
962         /* Release tty registration of line discipline */
963         int status = tty_unregister_ldisc(N_HDLC);
964
965         if (status)
966                 printk(hdlc_unregister_fail, status);
967         else
968                 printk(hdlc_unregister_ok);
969 }
970
971 module_init(n_hdlc_init);
972 module_exit(n_hdlc_exit);
973
974 MODULE_LICENSE("GPL");
975 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
976 module_param(debuglevel, int, 0);
977 module_param(maxframe, int, 0);
978 MODULE_ALIAS_LDISC(N_HDLC);