2 * Support for Sharp SL-C6000x PDAs
5 * Copyright (c) 2005 Dirk Opfer
7 * Based on code written by Sharp/Lineo for 2.4 kernels
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
20 #include <linux/interrupt.h>
21 #include <linux/delay.h>
23 #include <linux/mmc/host.h>
24 #include <linux/mfd/tc6393xb.h>
25 #include <linux/mfd/tmio.h>
26 #include <linux/mtd/nand.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/mtd/physmap.h>
30 #include <linux/gpio_keys.h>
31 #include <linux/input.h>
32 #include <linux/gpio.h>
33 #include <linux/pda_power.h>
34 #include <linux/spi/spi.h>
36 #include <asm/setup.h>
37 #include <asm/mach-types.h>
39 #include <mach/pxa25x.h>
40 #include <mach/reset.h>
41 #include <mach/irda.h>
45 #include <mach/tosa_bt.h>
46 #include <mach/pxa2xx_spi.h>
47 #include <mach/audio.h>
49 #include <asm/mach/arch.h>
50 #include <mach/tosa.h>
52 #include <asm/hardware/scoop.h>
53 #include <asm/mach/sharpsl_param.h>
59 static unsigned long tosa_pin_config[] = {
60 GPIO78_nCS_2, /* Scoop */
61 GPIO80_nCS_4, /* tg6393xb */
62 GPIO33_nCS_5, /* Scoop */
64 // GPIO76 CARD_VCC_ON1
66 GPIO19_GPIO, /* Reset out */
67 GPIO1_RST | WAKEUP_ON_EDGE_FALL,
69 GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
70 GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
71 GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
72 GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
73 GPIO20_GPIO, /* EAR_IN */
76 GPIO5_GPIO, /* USB_IN */
77 GPIO32_GPIO, /* Pen IRQ */
79 GPIO7_GPIO, /* Jacket Detect */
80 GPIO14_GPIO, /* BAT0_CRG */
81 GPIO12_GPIO, /* BAT1_CRG */
82 GPIO17_GPIO, /* BAT0_LOW */
83 GPIO84_GPIO, /* BAT1_LOW */
84 GPIO38_GPIO, /* BAT_LOCK */
87 GPIO15_GPIO, /* TC6393XB IRQ */
89 GPIO27_GPIO, /* LCD Sync */
94 GPIO9_GPIO, /* Detect */
95 GPIO10_GPIO, /* nSD_INT */
98 GPIO13_GPIO, /* CD_IRQ */
99 GPIO21_GPIO, /* Main Slot IRQ */
100 GPIO36_GPIO, /* Jacket Slot IRQ */
114 GPIO30_AC97_SDATA_OUT,
116 GPIO29_AC97_SDATA_IN_0,
134 GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
135 GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
136 GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
137 GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
138 GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
139 GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
140 GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
141 GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
142 GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
143 GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
144 GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
145 GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
146 GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
147 GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
148 GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
149 GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
150 GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
151 GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
158 /* IrDA is managed in other way */
166 static struct resource tosa_scoop_resources[] = {
168 .start = TOSA_CF_PHYS,
169 .end = TOSA_CF_PHYS + 0xfff,
170 .flags = IORESOURCE_MEM,
174 static struct scoop_config tosa_scoop_setup = {
175 .io_dir = TOSA_SCOOP_IO_DIR,
176 .gpio_base = TOSA_SCOOP_GPIO_BASE,
179 static struct platform_device tosascoop_device = {
180 .name = "sharp-scoop",
183 .platform_data = &tosa_scoop_setup,
185 .num_resources = ARRAY_SIZE(tosa_scoop_resources),
186 .resource = tosa_scoop_resources,
191 * SCOOP Device Jacket
193 static struct resource tosa_scoop_jc_resources[] = {
195 .start = TOSA_SCOOP_PHYS + 0x40,
196 .end = TOSA_SCOOP_PHYS + 0xfff,
197 .flags = IORESOURCE_MEM,
201 static struct scoop_config tosa_scoop_jc_setup = {
202 .io_dir = TOSA_SCOOP_JC_IO_DIR,
203 .gpio_base = TOSA_SCOOP_JC_GPIO_BASE,
206 static struct platform_device tosascoop_jc_device = {
207 .name = "sharp-scoop",
210 .platform_data = &tosa_scoop_jc_setup,
211 .parent = &tosascoop_device.dev,
213 .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
214 .resource = tosa_scoop_jc_resources,
220 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
222 .dev = &tosascoop_device.dev,
223 .irq = TOSA_IRQ_GPIO_CF_IRQ,
224 .cd_irq = TOSA_IRQ_GPIO_CF_CD,
225 .cd_irq_str = "PCMCIA0 CD",
227 .dev = &tosascoop_jc_device.dev,
228 .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
233 static struct scoop_pcmcia_config tosa_pcmcia_config = {
234 .devs = &tosa_pcmcia_scoop[0],
239 * USB Device Controller
241 static struct pxa2xx_udc_mach_info udc_info __initdata = {
242 .gpio_pullup = TOSA_GPIO_USB_PULLUP,
243 .gpio_vbus = TOSA_GPIO_USB_IN,
244 .gpio_vbus_inverted = 1,
250 static struct pxamci_platform_data tosa_mci_platform_data;
252 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
256 tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
258 err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
260 printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
261 goto err_gpio_detect;
263 err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
265 goto err_gpio_detect_dir;
267 err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
268 IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
269 "MMC/SD card detect", data);
271 printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
275 err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
277 printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
280 err = gpio_direction_input(TOSA_GPIO_SD_WP);
282 goto err_gpio_wp_dir;
284 err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
286 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
289 err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
291 goto err_gpio_pwr_dir;
293 err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
295 printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
298 err = gpio_direction_input(TOSA_GPIO_nSD_INT);
300 goto err_gpio_int_dir;
305 gpio_free(TOSA_GPIO_nSD_INT);
308 gpio_free(TOSA_GPIO_PWR_ON);
311 gpio_free(TOSA_GPIO_SD_WP);
313 free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
316 gpio_free(TOSA_GPIO_nSD_DETECT);
321 static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
323 struct pxamci_platform_data* p_d = dev->platform_data;
325 if (( 1 << vdd) & p_d->ocr_mask) {
326 gpio_set_value(TOSA_GPIO_PWR_ON, 1);
328 gpio_set_value(TOSA_GPIO_PWR_ON, 0);
332 static int tosa_mci_get_ro(struct device *dev)
334 return gpio_get_value(TOSA_GPIO_SD_WP);
337 static void tosa_mci_exit(struct device *dev, void *data)
339 gpio_free(TOSA_GPIO_nSD_INT);
340 gpio_free(TOSA_GPIO_PWR_ON);
341 gpio_free(TOSA_GPIO_SD_WP);
342 free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
343 gpio_free(TOSA_GPIO_nSD_DETECT);
346 static struct pxamci_platform_data tosa_mci_platform_data = {
347 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
348 .init = tosa_mci_init,
349 .get_ro = tosa_mci_get_ro,
350 .setpower = tosa_mci_setpower,
351 .exit = tosa_mci_exit,
357 static void tosa_irda_transceiver_mode(struct device *dev, int mode)
360 gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
361 pxa2xx_transceiver_mode(dev, mode);
362 gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
364 pxa2xx_transceiver_mode(dev, mode);
365 gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
369 static int tosa_irda_startup(struct device *dev)
373 ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
376 ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
380 ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
384 ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
388 tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
393 gpio_free(TOSA_GPIO_IR_POWERDWN);
396 gpio_free(TOSA_GPIO_IRDA_TX);
401 static void tosa_irda_shutdown(struct device *dev)
403 tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
404 gpio_free(TOSA_GPIO_IR_POWERDWN);
405 gpio_free(TOSA_GPIO_IRDA_TX);
408 static struct pxaficp_platform_data tosa_ficp_platform_data = {
409 .transceiver_cap = IR_SIRMODE | IR_OFF,
410 .transceiver_mode = tosa_irda_transceiver_mode,
411 .startup = tosa_irda_startup,
412 .shutdown = tosa_irda_shutdown,
418 static int tosa_power_init(struct device *dev)
420 int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
424 ret = gpio_direction_input(TOSA_GPIO_AC_IN);
431 gpio_free(TOSA_GPIO_AC_IN);
436 static void tosa_power_exit(struct device *dev)
438 gpio_free(TOSA_GPIO_AC_IN);
441 static int tosa_power_ac_online(void)
443 return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
446 static char *tosa_ac_supplied_to[] = {
452 static struct pda_power_pdata tosa_power_data = {
453 .init = tosa_power_init,
454 .is_ac_online = tosa_power_ac_online,
455 .exit = tosa_power_exit,
456 .supplied_to = tosa_ac_supplied_to,
457 .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
460 static struct resource tosa_power_resource[] = {
463 .start = gpio_to_irq(TOSA_GPIO_AC_IN),
464 .end = gpio_to_irq(TOSA_GPIO_AC_IN),
465 .flags = IORESOURCE_IRQ |
466 IORESOURCE_IRQ_HIGHEDGE |
467 IORESOURCE_IRQ_LOWEDGE,
471 static struct platform_device tosa_power_device = {
474 .dev.platform_data = &tosa_power_data,
475 .resource = tosa_power_resource,
476 .num_resources = ARRAY_SIZE(tosa_power_resource),
482 static struct platform_device tosakbd_device = {
483 .name = "tosa-keyboard",
487 static struct gpio_keys_button tosa_gpio_keys[] = {
489 * Two following keys are directly tied to "ON" button of tosa. Why?
490 * The first one can be used as a wakeup source, the second can't;
491 * also the first one is OR of ac_powered and on_button.
495 .code = KEY_RESERVED,
496 .gpio = TOSA_GPIO_POWERON,
504 .gpio = TOSA_GPIO_ON_KEY,
507 * can't be used as wakeup
514 .code = TOSA_KEY_RECORD,
515 .gpio = TOSA_GPIO_RECORD_BTN,
516 .desc = "Record Button",
522 .code = TOSA_KEY_SYNC,
523 .gpio = TOSA_GPIO_SYNC,
524 .desc = "Sync Button",
530 .code = SW_HEADPHONE_INSERT,
531 .gpio = TOSA_GPIO_EAR_IN,
532 .desc = "HeadPhone insert",
534 .debounce_interval = 300,
538 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
539 .buttons = tosa_gpio_keys,
540 .nbuttons = ARRAY_SIZE(tosa_gpio_keys),
543 static struct platform_device tosa_gpio_keys_device = {
547 .platform_data = &tosa_gpio_keys_platform_data,
554 static struct gpio_led tosa_gpio_leds[] = {
556 .name = "tosa:amber:charge",
557 .default_trigger = "main-battery-charging",
558 .gpio = TOSA_GPIO_CHRG_ERR_LED,
561 .name = "tosa:green:mail",
562 .default_trigger = "nand-disk",
563 .gpio = TOSA_GPIO_NOTE_LED,
566 .name = "tosa:dual:wlan",
567 .default_trigger = "none",
568 .gpio = TOSA_GPIO_WLAN_LED,
571 .name = "tosa:blue:bluetooth",
572 .default_trigger = "tosa-bt",
573 .gpio = TOSA_GPIO_BT_LED,
577 static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
578 .leds = tosa_gpio_leds,
579 .num_leds = ARRAY_SIZE(tosa_gpio_leds),
582 static struct platform_device tosaled_device = {
586 .platform_data = &tosa_gpio_leds_platform_data,
591 * Toshiba Mobile IO Controller
593 static struct resource tc6393xb_resources[] = {
595 .start = TOSA_LCDC_PHYS,
596 .end = TOSA_LCDC_PHYS + 0x3ffffff,
597 .flags = IORESOURCE_MEM,
601 .start = TOSA_IRQ_GPIO_TC6393XB_INT,
602 .end = TOSA_IRQ_GPIO_TC6393XB_INT,
603 .flags = IORESOURCE_IRQ,
608 static int tosa_tc6393xb_enable(struct platform_device *dev)
612 rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
615 rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
617 goto err_req_suspend;
618 rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
621 rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
624 rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
626 goto err_dir_suspend;
627 rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
633 gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
637 gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
638 gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
644 gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
646 gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
648 gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
653 static int tosa_tc6393xb_disable(struct platform_device *dev)
655 gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
656 gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
657 gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
662 static int tosa_tc6393xb_resume(struct platform_device *dev)
664 gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
666 gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
672 static int tosa_tc6393xb_suspend(struct platform_device *dev)
674 gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
675 gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
679 static struct mtd_partition tosa_nand_partition[] = {
683 .size = 7 * 1024 * 1024,
687 .offset = MTDPART_OFS_APPEND,
688 .size = 28 * 1024 * 1024,
692 .offset = MTDPART_OFS_APPEND,
693 .size = MTDPART_SIZ_FULL,
697 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
699 static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
703 .pattern = scan_ff_pattern
706 static struct tmio_nand_data tosa_tc6393xb_nand_config = {
707 .num_partitions = ARRAY_SIZE(tosa_nand_partition),
708 .partition = tosa_nand_partition,
709 .badblock_pattern = &tosa_tc6393xb_nand_bbt,
712 static int tosa_tc6393xb_setup(struct platform_device *dev)
716 rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
720 rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
727 gpio_free(TOSA_GPIO_CARD_VCC_ON);
732 static void tosa_tc6393xb_teardown(struct platform_device *dev)
734 gpio_free(TOSA_GPIO_CARD_VCC_ON);
737 #ifdef CONFIG_MFD_TC6393XB
738 static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
742 .pixclock = 0x002cdf00,/* PLL divisor */
743 .left_margin = 0x004c,
744 .right_margin = 0x005b,
745 .upper_margin = 0x0001,
746 .lower_margin = 0x000d,
749 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
750 .vmode = FB_VMODE_NONINTERLACED,
754 .pixclock = 0x00e7f203,/* PLL divisor */
755 .left_margin = 0x0024,
756 .right_margin = 0x002f,
757 .upper_margin = 0x0001,
758 .lower_margin = 0x000d,
761 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
762 .vmode = FB_VMODE_NONINTERLACED,
766 static struct tmio_fb_data tosa_tc6393xb_fb_config = {
767 .lcd_set_power = tc6393xb_lcd_set_power,
768 .lcd_mode = tc6393xb_lcd_mode,
769 .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
770 .modes = &tosa_tc6393xb_lcd_mode[0],
776 static struct tc6393xb_platform_data tosa_tc6393xb_data = {
777 .scr_pll2cr = 0x0cc1,
780 .irq_base = IRQ_BOARD_START,
781 .gpio_base = TOSA_TC6393XB_GPIO_BASE,
782 .setup = tosa_tc6393xb_setup,
783 .teardown = tosa_tc6393xb_teardown,
785 .enable = tosa_tc6393xb_enable,
786 .disable = tosa_tc6393xb_disable,
787 .suspend = tosa_tc6393xb_suspend,
788 .resume = tosa_tc6393xb_resume,
790 .nand_data = &tosa_tc6393xb_nand_config,
791 #ifdef CONFIG_MFD_TC6393XB
792 .fb_data = &tosa_tc6393xb_fb_config,
799 static struct platform_device tc6393xb_device = {
803 .platform_data = &tosa_tc6393xb_data,
805 .num_resources = ARRAY_SIZE(tc6393xb_resources),
806 .resource = tc6393xb_resources,
809 static struct tosa_bt_data tosa_bt_data = {
810 .gpio_pwr = TOSA_GPIO_BT_PWR_EN,
811 .gpio_reset = TOSA_GPIO_BT_RESET,
814 static struct platform_device tosa_bt_device = {
817 .dev.platform_data = &tosa_bt_data,
820 static struct pxa2xx_spi_master pxa_ssp_master_info = {
824 static struct spi_board_info spi_board_info[] __initdata = {
826 .modalias = "tosa-lcd",
828 .max_speed_hz = 28750,
835 static struct mtd_partition sharpsl_rom_parts[] = {
837 .name ="Boot PROM Filesystem",
838 .offset = 0x00160000,
839 .size = MTDPART_SIZ_FULL,
843 static struct physmap_flash_data sharpsl_rom_data = {
845 .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
846 .parts = sharpsl_rom_parts,
849 static struct resource sharpsl_rom_resources[] = {
853 .flags = IORESOURCE_MEM,
857 static struct platform_device sharpsl_rom_device = {
858 .name = "physmap-flash",
860 .resource = sharpsl_rom_resources,
861 .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
862 .dev.platform_data = &sharpsl_rom_data,
865 static struct platform_device *devices[] __initdata = {
867 &tosascoop_jc_device,
871 &tosa_gpio_keys_device,
877 static void tosa_poweroff(void)
879 arm_machine_restart('g', NULL);
882 static void tosa_restart(char mode, const char *cmd)
884 /* Bootloader magic for a reboot */
885 if((MSC0 & 0xffff0000) == 0x7ff00000)
886 MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
891 static void __init tosa_init(void)
895 pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
896 gpio_set_wake(MFP_PIN_GPIO1, 1);
897 /* We can't pass to gpio-keys since it will drop the Reset altfunc */
899 init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
901 pm_power_off = tosa_poweroff;
902 arm_pm_restart = tosa_restart;
906 /* enable batt_fault */
909 dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
910 dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
911 dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
913 pxa_set_mci_info(&tosa_mci_platform_data);
914 pxa_set_udc_info(&udc_info);
915 pxa_set_ficp_info(&tosa_ficp_platform_data);
916 pxa_set_i2c_info(NULL);
917 pxa_set_ac97_info(NULL);
918 platform_scoop_config = &tosa_pcmcia_config;
920 pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
921 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
923 clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
925 platform_add_devices(devices, ARRAY_SIZE(devices));
928 static void __init fixup_tosa(struct machine_desc *desc,
929 struct tag *tags, char **cmdline, struct meminfo *mi)
931 sharpsl_save_param();
933 mi->bank[0].start = 0xa0000000;
934 mi->bank[0].node = 0;
935 mi->bank[0].size = (64*1024*1024);
938 MACHINE_START(TOSA, "SHARP Tosa")
939 .phys_io = 0x40000000,
940 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
942 .map_io = pxa_map_io,
943 .init_irq = pxa25x_init_irq,
944 .init_machine = tosa_init,