2 * IOMMU implementation for Cell Broadband Processor Architecture
4 * (C) Copyright IBM Corporation 2006-2008
6 * Author: Jeremy Kerr <jk@ozlabs.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2, or (at your option)
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/kernel.h>
26 #include <linux/init.h>
27 #include <linux/interrupt.h>
28 #include <linux/notifier.h>
30 #include <linux/of_platform.h>
31 #include <linux/lmb.h>
34 #include <asm/iommu.h>
35 #include <asm/machdep.h>
36 #include <asm/pci-bridge.h>
38 #include <asm/firmware.h>
39 #include <asm/cell-regs.h>
41 #include "interrupt.h"
43 /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages
44 * instead of leaving them mapped to some dummy page. This can be
45 * enabled once the appropriate workarounds for spider bugs have
48 #define CELL_IOMMU_REAL_UNMAP
50 /* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of
51 * IO PTEs based on the transfer direction. That can be enabled
52 * once spider-net has been fixed to pass the correct direction
53 * to the DMA mapping functions
55 #define CELL_IOMMU_STRICT_PROTECTION
60 /* IOC mmap registers */
61 #define IOC_Reg_Size 0x2000
63 #define IOC_IOPT_CacheInvd 0x908
64 #define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul
65 #define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul
66 #define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul
68 #define IOC_IOST_Origin 0x918
69 #define IOC_IOST_Origin_E 0x8000000000000000ul
70 #define IOC_IOST_Origin_HW 0x0000000000000800ul
71 #define IOC_IOST_Origin_HL 0x0000000000000400ul
73 #define IOC_IO_ExcpStat 0x920
74 #define IOC_IO_ExcpStat_V 0x8000000000000000ul
75 #define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul
76 #define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul
77 #define IOC_IO_ExcpStat_SPF_P 0x4000000000000000ul
78 #define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul
79 #define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul
80 #define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful
82 #define IOC_IO_ExcpMask 0x928
83 #define IOC_IO_ExcpMask_SFE 0x4000000000000000ul
84 #define IOC_IO_ExcpMask_PFE 0x2000000000000000ul
86 #define IOC_IOCmd_Offset 0x1000
88 #define IOC_IOCmd_Cfg 0xc00
89 #define IOC_IOCmd_Cfg_TE 0x0000800000000000ul
92 /* Segment table entries */
93 #define IOSTE_V 0x8000000000000000ul /* valid */
94 #define IOSTE_H 0x4000000000000000ul /* cache hint */
95 #define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */
96 #define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */
97 #define IOSTE_PS_Mask 0x0000000000000007ul /* page size */
98 #define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */
99 #define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */
100 #define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */
101 #define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */
103 /* Page table entries */
104 #define IOPTE_PP_W 0x8000000000000000ul /* protection: write */
105 #define IOPTE_PP_R 0x4000000000000000ul /* protection: read */
106 #define IOPTE_M 0x2000000000000000ul /* coherency required */
107 #define IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */
108 #define IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */
109 #define IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */
110 #define IOPTE_H 0x0000000000000800ul /* cache hint */
111 #define IOPTE_IOID_Mask 0x00000000000007fful /* ioid */
115 #define IO_SEGMENT_SHIFT 28
116 #define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift))
118 /* The high bit needs to be set on every DMA address */
119 #define SPIDER_DMA_OFFSET 0x80000000ul
121 struct iommu_window {
122 struct list_head list;
123 struct cbe_iommu *iommu;
124 unsigned long offset;
127 struct iommu_table table;
134 void __iomem *xlate_regs;
135 void __iomem *cmd_regs;
139 struct list_head windows;
142 /* Static array of iommus, one per node
143 * each contains a list of windows, keyed from dma_window property
144 * - on bus setup, look for a matching window, or create one
145 * - on dev setup, assign iommu_table ptr
147 static struct cbe_iommu iommus[NR_IOMMUS];
148 static int cbe_nr_iommus;
150 static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
153 unsigned long __iomem *reg;
157 reg = iommu->xlate_regs + IOC_IOPT_CacheInvd;
160 /* we can invalidate up to 1 << 11 PTEs at once */
161 n = min(n_ptes, 1l << 11);
162 val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask)
163 | (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask)
164 | IOC_IOPT_CacheInvd_Busy;
167 while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy)
175 static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
176 unsigned long uaddr, enum dma_data_direction direction)
179 unsigned long *io_pte, base_pte;
180 struct iommu_window *window =
181 container_of(tbl, struct iommu_window, table);
183 /* implementing proper protection causes problems with the spidernet
184 * driver - check mapping directions later, but allow read & write by
186 #ifdef CELL_IOMMU_STRICT_PROTECTION
187 /* to avoid referencing a global, we use a trick here to setup the
188 * protection bit. "prot" is setup to be 3 fields of 4 bits apprended
189 * together for each of the 3 supported direction values. It is then
190 * shifted left so that the fields matching the desired direction
191 * lands on the appropriate bits, and other bits are masked out.
193 const unsigned long prot = 0xc48;
195 ((prot << (52 + 4 * direction)) & (IOPTE_PP_W | IOPTE_PP_R))
196 | IOPTE_M | IOPTE_SO_RW | (window->ioid & IOPTE_IOID_Mask);
198 base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
199 (window->ioid & IOPTE_IOID_Mask);
202 io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
204 for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
205 io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
209 invalidate_tce_cache(window->iommu, io_pte, npages);
211 pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
212 index, npages, direction, base_pte);
215 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
219 unsigned long *io_pte, pte;
220 struct iommu_window *window =
221 container_of(tbl, struct iommu_window, table);
223 pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages);
225 #ifdef CELL_IOMMU_REAL_UNMAP
228 /* spider bridge does PCI reads after freeing - insert a mapping
229 * to a scratch page instead of an invalid entry */
230 pte = IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | __pa(window->iommu->pad_page)
231 | (window->ioid & IOPTE_IOID_Mask);
234 io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
236 for (i = 0; i < npages; i++)
241 invalidate_tce_cache(window->iommu, io_pte, npages);
244 static irqreturn_t ioc_interrupt(int irq, void *data)
247 struct cbe_iommu *iommu = data;
249 stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
251 /* Might want to rate limit it */
252 printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat);
253 printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n",
254 !!(stat & IOC_IO_ExcpStat_V),
255 (stat & IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ',
256 (stat & IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ',
257 (stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write",
258 (unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask));
259 printk(KERN_ERR " page=0x%016lx\n",
260 stat & IOC_IO_ExcpStat_ADDR_Mask);
262 /* clear interrupt */
263 stat &= ~IOC_IO_ExcpStat_V;
264 out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat);
269 static int cell_iommu_find_ioc(int nid, unsigned long *base)
271 struct device_node *np;
276 /* First look for new style /be nodes */
277 for_each_node_by_name(np, "ioc") {
278 if (of_node_to_nid(np) != nid)
280 if (of_address_to_resource(np, 0, &r)) {
281 printk(KERN_ERR "iommu: can't get address for %s\n",
290 /* Ok, let's try the old way */
291 for_each_node_by_type(np, "cpu") {
292 const unsigned int *nidp;
293 const unsigned long *tmp;
295 nidp = of_get_property(np, "node-id", NULL);
296 if (nidp && *nidp == nid) {
297 tmp = of_get_property(np, "ioc-translation", NULL);
309 static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
310 unsigned long dbase, unsigned long dsize,
311 unsigned long fbase, unsigned long fsize)
314 unsigned long segments, stab_size;
316 segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
318 pr_debug("%s: iommu[%d]: segments: %lu\n",
319 __FUNCTION__, iommu->nid, segments);
321 /* set up the segment table */
322 stab_size = segments * sizeof(unsigned long);
323 page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
325 iommu->stab = page_address(page);
326 memset(iommu->stab, 0, stab_size);
329 static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
330 unsigned long base, unsigned long size, unsigned long gap_base,
331 unsigned long gap_size, unsigned long page_shift)
335 unsigned long reg, segments, pages_per_segment, ptab_size,
336 n_pte_pages, start_seg, *ptab;
338 start_seg = base >> IO_SEGMENT_SHIFT;
339 segments = size >> IO_SEGMENT_SHIFT;
340 pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
341 /* PTEs for each segment must start on a 4K bounday */
342 pages_per_segment = max(pages_per_segment,
343 (1 << 12) / sizeof(unsigned long));
345 ptab_size = segments * pages_per_segment * sizeof(unsigned long);
346 pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
347 iommu->nid, ptab_size, get_order(ptab_size));
348 page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
351 ptab = page_address(page);
352 memset(ptab, 0, ptab_size);
354 /* number of 4K pages needed for a page table */
355 n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
357 pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
358 __FUNCTION__, iommu->nid, iommu->stab, ptab,
361 /* initialise the STEs */
362 reg = IOSTE_V | ((n_pte_pages - 1) << 5);
364 switch (page_shift) {
365 case 12: reg |= IOSTE_PS_4K; break;
366 case 16: reg |= IOSTE_PS_64K; break;
367 case 20: reg |= IOSTE_PS_1M; break;
368 case 24: reg |= IOSTE_PS_16M; break;
372 gap_base = gap_base >> IO_SEGMENT_SHIFT;
373 gap_size = gap_size >> IO_SEGMENT_SHIFT;
375 pr_debug("Setting up IOMMU stab:\n");
376 for (i = start_seg; i < (start_seg + segments); i++) {
377 if (i >= gap_base && i < (gap_base + gap_size)) {
378 pr_debug("\toverlap at %d, skipping\n", i);
381 iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
383 pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
389 static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
392 unsigned long reg, xlate_base;
395 if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
396 panic("%s: missing IOC register mappings for node %d\n",
397 __FUNCTION__, iommu->nid);
399 iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
400 iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
402 /* ensure that the STEs have updated */
405 /* setup interrupts for the iommu. */
406 reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat);
407 out_be64(iommu->xlate_regs + IOC_IO_ExcpStat,
408 reg & ~IOC_IO_ExcpStat_V);
409 out_be64(iommu->xlate_regs + IOC_IO_ExcpMask,
410 IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE);
412 virq = irq_create_mapping(NULL,
413 IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT));
414 BUG_ON(virq == NO_IRQ);
416 ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED,
420 /* set the IOC segment table origin register (and turn on the iommu) */
421 reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW;
422 out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg);
423 in_be64(iommu->xlate_regs + IOC_IOST_Origin);
425 /* turn on IO translation */
426 reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE;
427 out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg);
430 static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
431 unsigned long base, unsigned long size)
433 cell_iommu_setup_stab(iommu, base, size, 0, 0);
434 iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
436 cell_iommu_enable_hardware(iommu);
439 #if 0/* Unused for now */
440 static struct iommu_window *find_window(struct cbe_iommu *iommu,
441 unsigned long offset, unsigned long size)
443 struct iommu_window *window;
445 /* todo: check for overlapping (but not equal) windows) */
447 list_for_each_entry(window, &(iommu->windows), list) {
448 if (window->offset == offset && window->size == size)
456 static inline u32 cell_iommu_get_ioid(struct device_node *np)
460 ioid = of_get_property(np, "ioid", NULL);
462 printk(KERN_WARNING "iommu: missing ioid for %s using 0\n",
470 static struct iommu_window * __init
471 cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
472 unsigned long offset, unsigned long size,
473 unsigned long pte_offset)
475 struct iommu_window *window;
479 ioid = cell_iommu_get_ioid(np);
481 window = kmalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid);
482 BUG_ON(window == NULL);
484 window->offset = offset;
487 window->iommu = iommu;
489 window->table.it_blocksize = 16;
490 window->table.it_base = (unsigned long)iommu->ptab;
491 window->table.it_index = iommu->nid;
492 window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset;
493 window->table.it_size = size >> IOMMU_PAGE_SHIFT;
495 iommu_init_table(&window->table, iommu->nid);
497 pr_debug("\tioid %d\n", window->ioid);
498 pr_debug("\tblocksize %ld\n", window->table.it_blocksize);
499 pr_debug("\tbase 0x%016lx\n", window->table.it_base);
500 pr_debug("\toffset 0x%lx\n", window->table.it_offset);
501 pr_debug("\tsize %ld\n", window->table.it_size);
503 list_add(&window->list, &iommu->windows);
508 /* We need to map and reserve the first IOMMU page since it's used
509 * by the spider workaround. In theory, we only need to do that when
510 * running on spider but it doesn't really matter.
512 * This code also assumes that we have a window that starts at 0,
513 * which is the case on all spider based blades.
515 page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
517 iommu->pad_page = page_address(page);
518 clear_page(iommu->pad_page);
520 __set_bit(0, window->table.it_map);
521 tce_build_cell(&window->table, window->table.it_offset, 1,
522 (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
523 window->table.it_hint = window->table.it_blocksize;
528 static struct cbe_iommu *cell_iommu_for_node(int nid)
532 for (i = 0; i < cbe_nr_iommus; i++)
533 if (iommus[i].nid == nid)
538 static unsigned long cell_dma_direct_offset;
540 static unsigned long dma_iommu_fixed_base;
541 struct dma_mapping_ops dma_iommu_fixed_ops;
543 static void cell_dma_dev_setup_iommu(struct device *dev)
545 struct iommu_window *window;
546 struct cbe_iommu *iommu;
547 struct dev_archdata *archdata = &dev->archdata;
549 /* Current implementation uses the first window available in that
550 * node's iommu. We -might- do something smarter later though it may
553 iommu = cell_iommu_for_node(archdata->numa_node);
554 if (iommu == NULL || list_empty(&iommu->windows)) {
555 printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
556 archdata->of_node ? archdata->of_node->full_name : "?",
557 archdata->numa_node);
560 window = list_entry(iommu->windows.next, struct iommu_window, list);
562 archdata->dma_data = &window->table;
565 static void cell_dma_dev_setup_fixed(struct device *dev);
567 static void cell_dma_dev_setup(struct device *dev)
569 struct dev_archdata *archdata = &dev->archdata;
571 /* Order is important here, these are not mutually exclusive */
572 if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
573 cell_dma_dev_setup_fixed(dev);
574 else if (get_pci_dma_ops() == &dma_iommu_ops)
575 cell_dma_dev_setup_iommu(dev);
576 else if (get_pci_dma_ops() == &dma_direct_ops)
577 archdata->dma_data = (void *)cell_dma_direct_offset;
582 static void cell_pci_dma_dev_setup(struct pci_dev *dev)
584 cell_dma_dev_setup(&dev->dev);
587 static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
590 struct device *dev = data;
592 /* We are only intereted in device addition */
593 if (action != BUS_NOTIFY_ADD_DEVICE)
596 /* We use the PCI DMA ops */
597 dev->archdata.dma_ops = get_pci_dma_ops();
599 cell_dma_dev_setup(dev);
604 static struct notifier_block cell_of_bus_notifier = {
605 .notifier_call = cell_of_bus_notify
608 static int __init cell_iommu_get_window(struct device_node *np,
612 const void *dma_window;
615 /* Use ibm,dma-window if available, else, hard code ! */
616 dma_window = of_get_property(np, "ibm,dma-window", NULL);
617 if (dma_window == NULL) {
623 of_parse_dma_window(np, dma_window, &index, base, size);
627 static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np)
629 struct cbe_iommu *iommu;
633 nid = of_node_to_nid(np);
635 printk(KERN_ERR "iommu: failed to get node for %s\n",
639 pr_debug("iommu: setting up iommu for node %d (%s)\n",
642 /* XXX todo: If we can have multiple windows on the same IOMMU, which
643 * isn't the case today, we probably want here to check wether the
644 * iommu for that node is already setup.
645 * However, there might be issue with getting the size right so let's
646 * ignore that for now. We might want to completely get rid of the
647 * multiple window support since the cell iommu supports per-page ioids
650 if (cbe_nr_iommus >= NR_IOMMUS) {
651 printk(KERN_ERR "iommu: too many IOMMUs detected ! (%s)\n",
656 /* Init base fields */
661 snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i);
662 INIT_LIST_HEAD(&iommu->windows);
667 static void __init cell_iommu_init_one(struct device_node *np,
668 unsigned long offset)
670 struct cbe_iommu *iommu;
671 unsigned long base, size;
673 iommu = cell_iommu_alloc(np);
677 /* Obtain a window for it */
678 cell_iommu_get_window(np, &base, &size);
680 pr_debug("\ttranslating window 0x%lx...0x%lx\n",
681 base, base + size - 1);
683 /* Initialize the hardware */
684 cell_iommu_setup_hardware(iommu, base, size);
686 /* Setup the iommu_table */
687 cell_iommu_setup_window(iommu, np, base, size,
688 offset >> IOMMU_PAGE_SHIFT);
691 static void __init cell_disable_iommus(void)
694 unsigned long base, val;
695 void __iomem *xregs, *cregs;
697 /* Make sure IOC translation is disabled on all nodes */
698 for_each_online_node(node) {
699 if (cell_iommu_find_ioc(node, &base))
701 xregs = ioremap(base, IOC_Reg_Size);
704 cregs = xregs + IOC_IOCmd_Offset;
706 pr_debug("iommu: cleaning up iommu on node %d\n", node);
708 out_be64(xregs + IOC_IOST_Origin, 0);
709 (void)in_be64(xregs + IOC_IOST_Origin);
710 val = in_be64(cregs + IOC_IOCmd_Cfg);
711 val &= ~IOC_IOCmd_Cfg_TE;
712 out_be64(cregs + IOC_IOCmd_Cfg, val);
713 (void)in_be64(cregs + IOC_IOCmd_Cfg);
719 static int __init cell_iommu_init_disabled(void)
721 struct device_node *np = NULL;
722 unsigned long base = 0, size;
724 /* When no iommu is present, we use direct DMA ops */
725 set_pci_dma_ops(&dma_direct_ops);
727 /* First make sure all IOC translation is turned off */
728 cell_disable_iommus();
730 /* If we have no Axon, we set up the spider DMA magic offset */
731 if (of_find_node_by_name(NULL, "axon") == NULL)
732 cell_dma_direct_offset = SPIDER_DMA_OFFSET;
734 /* Now we need to check to see where the memory is mapped
735 * in PCI space. We assume that all busses use the same dma
736 * window which is always the case so far on Cell, thus we
737 * pick up the first pci-internal node we can find and check
738 * the DMA window from there.
740 for_each_node_by_name(np, "axon") {
741 if (np->parent == NULL || np->parent->parent != NULL)
743 if (cell_iommu_get_window(np, &base, &size) == 0)
747 for_each_node_by_name(np, "pci-internal") {
748 if (np->parent == NULL || np->parent->parent != NULL)
750 if (cell_iommu_get_window(np, &base, &size) == 0)
756 /* If we found a DMA window, we check if it's big enough to enclose
757 * all of physical memory. If not, we force enable IOMMU
759 if (np && size < lmb_end_of_DRAM()) {
760 printk(KERN_WARNING "iommu: force-enabled, dma window"
761 " (%ldMB) smaller than total memory (%ldMB)\n",
762 size >> 20, lmb_end_of_DRAM() >> 20);
766 cell_dma_direct_offset += base;
768 if (cell_dma_direct_offset != 0)
769 ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
771 printk("iommu: disabled, direct DMA offset is 0x%lx\n",
772 cell_dma_direct_offset);
778 * Fixed IOMMU mapping support
780 * This code adds support for setting up a fixed IOMMU mapping on certain
781 * cell machines. For 64-bit devices this avoids the performance overhead of
782 * mapping and unmapping pages at runtime. 32-bit devices are unable to use
785 * The fixed mapping is established at boot, and maps all of physical memory
786 * 1:1 into device space at some offset. On machines with < 30 GB of memory
787 * we setup the fixed mapping immediately above the normal IOMMU window.
789 * For example a machine with 4GB of memory would end up with the normal
790 * IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
791 * this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
792 * 3GB, plus any offset required by firmware. The firmware offset is encoded
793 * in the "dma-ranges" property.
795 * On machines with 30GB or more of memory, we are unable to place the fixed
796 * mapping above the normal IOMMU window as we would run out of address space.
797 * Instead we move the normal IOMMU window to coincide with the hash page
798 * table, this region does not need to be part of the fixed mapping as no
799 * device should ever be DMA'ing to it. We then setup the fixed mapping
803 static u64 cell_iommu_get_fixed_address(struct device *dev)
805 u64 cpu_addr, size, best_size, pci_addr = OF_BAD_ADDR;
806 struct device_node *np;
807 const u32 *ranges = NULL;
810 np = of_node_get(dev->archdata.of_node);
812 ranges = of_get_property(np, "dma-ranges", &len);
815 np = of_get_next_parent(np);
819 dev_dbg(dev, "iommu: no dma-ranges found\n");
825 /* dma-ranges format:
827 * 2 cells: pci address
828 * 2 cells: parent address
831 for (i = 0, best = -1, best_size = 0; i < len; i += 7) {
832 cpu_addr = of_translate_dma_address(np, ranges +i + 3);
833 size = of_read_number(ranges + i + 5, 2);
835 if (cpu_addr == 0 && size > best_size) {
842 pci_addr = of_read_number(ranges + best + 1, 2);
844 dev_dbg(dev, "iommu: no suitable range found!\n");
852 static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
854 if (!dev->dma_mask || !dma_supported(dev, dma_mask))
857 if (dma_mask == DMA_BIT_MASK(64) &&
858 cell_iommu_get_fixed_address(dev) != OF_BAD_ADDR)
860 dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
861 set_dma_ops(dev, &dma_iommu_fixed_ops);
863 dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
864 set_dma_ops(dev, get_pci_dma_ops());
867 cell_dma_dev_setup(dev);
869 *dev->dma_mask = dma_mask;
874 static void cell_dma_dev_setup_fixed(struct device *dev)
876 struct dev_archdata *archdata = &dev->archdata;
879 addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
880 archdata->dma_data = (void *)addr;
882 dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
885 static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
886 unsigned long base_pte)
888 unsigned long segment, offset;
890 segment = addr >> IO_SEGMENT_SHIFT;
891 offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
892 ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
894 pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
895 addr, ptab, segment, offset);
897 ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
900 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
901 struct device_node *np, unsigned long dbase, unsigned long dsize,
902 unsigned long fbase, unsigned long fsize)
904 unsigned long base_pte, uaddr, ioaddr, *ptab;
906 ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
908 dma_iommu_fixed_base = fbase;
910 pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
912 base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
913 | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
915 for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
916 /* Don't touch the dynamic region */
917 ioaddr = uaddr + fbase;
918 if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
919 pr_debug("iommu: fixed/dynamic overlap, skipping\n");
923 insert_16M_pte(uaddr, ptab, base_pte);
929 static int __init cell_iommu_fixed_mapping_init(void)
931 unsigned long dbase, dsize, fbase, fsize, hbase, hend;
932 struct cbe_iommu *iommu;
933 struct device_node *np;
935 /* The fixed mapping is only supported on axon machines */
936 np = of_find_node_by_name(NULL, "axon");
938 pr_debug("iommu: fixed mapping disabled, no axons found\n");
942 /* We must have dma-ranges properties for fixed mapping to work */
943 for (np = NULL; (np = of_find_all_nodes(np));) {
944 if (of_find_property(np, "dma-ranges", NULL))
950 pr_debug("iommu: no dma-ranges found, no fixed mapping\n");
954 /* The default setup is to have the fixed mapping sit after the
955 * dynamic region, so find the top of the largest IOMMU window
956 * on any axon, then add the size of RAM and that's our max value.
957 * If that is > 32GB we have to do other shennanigans.
960 for_each_node_by_name(np, "axon") {
961 cell_iommu_get_window(np, &dbase, &dsize);
962 fbase = max(fbase, dbase + dsize);
965 fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
966 fsize = lmb_phys_mem_size();
968 if ((fbase + fsize) <= 0x800000000)
969 hbase = 0; /* use the device tree window */
971 /* If we're over 32 GB we need to cheat. We can't map all of
972 * RAM with the fixed mapping, and also fit the dynamic
973 * region. So try to place the dynamic region where the hash
974 * table sits, drivers never need to DMA to it, we don't
975 * need a fixed mapping for that area.
978 pr_debug("iommu: htab is NULL, on LPAR? Huh?\n");
981 hbase = __pa(htab_address);
982 hend = hbase + htab_size_bytes;
984 /* The window must start and end on a segment boundary */
985 if ((hbase != _ALIGN_UP(hbase, 1 << IO_SEGMENT_SHIFT)) ||
986 (hend != _ALIGN_UP(hend, 1 << IO_SEGMENT_SHIFT))) {
987 pr_debug("iommu: hash window not segment aligned\n");
991 /* Check the hash window fits inside the real DMA window */
992 for_each_node_by_name(np, "axon") {
993 cell_iommu_get_window(np, &dbase, &dsize);
995 if (hbase < dbase || (hend > (dbase + dsize))) {
996 pr_debug("iommu: hash window doesn't fit in"
997 "real DMA window\n");
1005 /* Setup the dynamic regions */
1006 for_each_node_by_name(np, "axon") {
1007 iommu = cell_iommu_alloc(np);
1011 cell_iommu_get_window(np, &dbase, &dsize);
1014 dsize = htab_size_bytes;
1017 printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx "
1018 "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
1019 dbase + dsize, fbase, fbase + fsize);
1021 cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
1022 iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
1024 cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
1026 cell_iommu_enable_hardware(iommu);
1027 cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
1030 dma_iommu_fixed_ops = dma_direct_ops;
1031 dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch;
1033 dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
1034 set_pci_dma_ops(&dma_iommu_ops);
1039 static int iommu_fixed_disabled;
1041 static int __init setup_iommu_fixed(char *str)
1043 if (strcmp(str, "off") == 0)
1044 iommu_fixed_disabled = 1;
1048 __setup("iommu_fixed=", setup_iommu_fixed);
1050 static int __init cell_iommu_init(void)
1052 struct device_node *np;
1054 /* If IOMMU is disabled or we have little enough RAM to not need
1055 * to enable it, we setup a direct mapping.
1057 * Note: should we make sure we have the IOMMU actually disabled ?
1060 (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
1061 if (cell_iommu_init_disabled() == 0)
1064 /* Setup various ppc_md. callbacks */
1065 ppc_md.pci_dma_dev_setup = cell_pci_dma_dev_setup;
1066 ppc_md.tce_build = tce_build_cell;
1067 ppc_md.tce_free = tce_free_cell;
1069 if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0)
1072 /* Create an iommu for each /axon node. */
1073 for_each_node_by_name(np, "axon") {
1074 if (np->parent == NULL || np->parent->parent != NULL)
1076 cell_iommu_init_one(np, 0);
1079 /* Create an iommu for each toplevel /pci-internal node for
1080 * old hardware/firmware
1082 for_each_node_by_name(np, "pci-internal") {
1083 if (np->parent == NULL || np->parent->parent != NULL)
1085 cell_iommu_init_one(np, SPIDER_DMA_OFFSET);
1088 /* Setup default PCI iommu ops */
1089 set_pci_dma_ops(&dma_iommu_ops);
1092 /* Register callbacks on OF platform device addition/removal
1093 * to handle linking them to the right DMA operations
1095 bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier);
1099 machine_arch_initcall(cell, cell_iommu_init);
1100 machine_arch_initcall(celleb_native, cell_iommu_init);