git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/orinoco_cs.c

   1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
   2  *
   3  * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
   4  * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
   5  * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
   6  * It should also be usable on various Prism II based cards such as the
   7  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
   8  * cards such as the 3Com AirConnect and Ericsson WLAN.
   9  *
  10  * Copyright notice & release notes in file orinoco.c
  11  */
  12
  13 #define DRIVER_NAME "orinoco_cs"
  14 #define PFX DRIVER_NAME ": "
  15
  16 #include <linux/config.h>
  17 #include <linux/module.h>
  18 #include <linux/kernel.h>
  19 #include <linux/init.h>
  20 #include <linux/delay.h>
  21 #include <pcmcia/cs_types.h>
  22 #include <pcmcia/cs.h>
  23 #include <pcmcia/cistpl.h>
  24 #include <pcmcia/cisreg.h>
  25 #include <pcmcia/ds.h>
  26
  27 #include "orinoco.h"
  28
  29 /********************************************************************/
  30 /* Module stuff                                                     */
  31 /********************************************************************/
  32
  33 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
  34 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
  35 MODULE_LICENSE("Dual MPL/GPL");
  36
  37 /* Module parameters */
  38
  39 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  40  * don't have any CIS entry for it. This workaround it... */
  41 static int ignore_cis_vcc; /* = 0 */
  42 module_param(ignore_cis_vcc, int, 0);
  43 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
  44
  45 /********************************************************************/
  46 /* Data structures                                                  */
  47 /********************************************************************/
  48
  49 /* PCMCIA specific device information (goes in the card field of
  50  * struct orinoco_private */
  51 struct orinoco_pccard {
  52         dev_link_t link;
  53         dev_node_t node;
  54
  55         /* Used to handle hard reset */
  56         /* yuck, we need this hack to work around the insanity of the
  57          * PCMCIA layer */
  58         unsigned long hard_reset_in_progress;
  59 };
  60
  61
  62 /********************************************************************/
  63 /* Function prototypes                                              */
  64 /********************************************************************/
  65
  66 static void orinoco_cs_config(dev_link_t *link);
  67 static void orinoco_cs_release(dev_link_t *link);
  68 static void orinoco_cs_detach(struct pcmcia_device *p_dev);
  69
  70 /********************************************************************/
  71 /* Device methods                                                   */
  72 /********************************************************************/
  73
  74 static int
  75 orinoco_cs_hard_reset(struct orinoco_private *priv)
  76 {
  77         struct orinoco_pccard *card = priv->card;
  78         dev_link_t *link = &card->link;
  79         int err;
  80
  81         /* We need atomic ops here, because we're not holding the lock */
  82         set_bit(0, &card->hard_reset_in_progress);
  83
  84         err = pcmcia_reset_card(link->handle, NULL);
  85         if (err)
  86                 return err;
  87
  88         msleep(100);
  89         clear_bit(0, &card->hard_reset_in_progress);
  90
  91         return 0;
  92 }
  93
  94 /********************************************************************/
  95 /* PCMCIA stuff                                                     */
  96 /********************************************************************/
  97
  98 /*
  99  * This creates an "instance" of the driver, allocating local data
 100  * structures for one device.  The device is registered with Card
 101  * Services.
 102  *
 103  * The dev_link structure is initialized, but we don't actually
 104  * configure the card at this point -- we wait until we receive a card
 105  * insertion event.  */
 106 static int
 107 orinoco_cs_attach(struct pcmcia_device *p_dev)
 108 {
 109         struct net_device *dev;
 110         struct orinoco_private *priv;
 111         struct orinoco_pccard *card;
 112         dev_link_t *link;
 113
 114         dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
 115         if (! dev)
 116                 return -ENOMEM;
 117         priv = netdev_priv(dev);
 118         card = priv->card;
 119
 120         /* Link both structures together */
 121         link = &card->link;
 122         link->priv = dev;
 123
 124         /* Interrupt setup */
 125         link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
 126         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 127         link->irq.Handler = orinoco_interrupt;
 128         link->irq.Instance = dev;
 129
 130         /* General socket configuration defaults can go here.  In this
 131          * client, we assume very little, and rely on the CIS for
 132          * almost everything.  In most clients, many details (i.e.,
 133          * number, sizes, and attributes of IO windows) are fixed by
 134          * the nature of the device, and can be hard-wired here. */
 135         link->conf.Attributes = 0;
 136         link->conf.IntType = INT_MEMORY_AND_IO;
 137
 138         /* Register with Card Services */
 139         link->next = NULL;
 140
 141         link->handle = p_dev;
 142         p_dev->instance = link;
 143
 144         link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 145         orinoco_cs_config(link);
 146
 147         return 0;
 148 }                               /* orinoco_cs_attach */
 149
 150 /*
 151  * This deletes a driver "instance".  The device is de-registered with
 152  * Card Services.  If it has been released, all local data structures
 153  * are freed.  Otherwise, the structures will be freed when the device
 154  * is released.
 155  */
 156 static void orinoco_cs_detach(struct pcmcia_device *p_dev)
 157 {
 158         dev_link_t *link = dev_to_instance(p_dev);
 159         struct net_device *dev = link->priv;
 160
 161         if (link->state & DEV_CONFIG)
 162                 orinoco_cs_release(link);
 163
 164         DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
 165         if (link->dev) {
 166                 DEBUG(0, PFX "About to unregister net device %p\n",
 167                       dev);
 168                 unregister_netdev(dev);
 169         }
 170         free_orinocodev(dev);
 171 }                               /* orinoco_cs_detach */
 172
 173 /*
 174  * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
 175  * event is received, to configure the PCMCIA socket, and to make the
 176  * device available to the system.
 177  */
 178
 179 #define CS_CHECK(fn, ret) do { \
 180                 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
 181         } while (0)
 182
 183 static void
 184 orinoco_cs_config(dev_link_t *link)
 185 {
 186         struct net_device *dev = link->priv;
 187         client_handle_t handle = link->handle;
 188         struct orinoco_private *priv = netdev_priv(dev);
 189         struct orinoco_pccard *card = priv->card;
 190         hermes_t *hw = &priv->hw;
 191         int last_fn, last_ret;
 192         u_char buf[64];
 193         config_info_t conf;
 194         cisinfo_t info;
 195         tuple_t tuple;
 196         cisparse_t parse;
 197         void __iomem *mem;
 198
 199         CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info));
 200
 201         /*
 202          * This reads the card's CONFIG tuple to find its
 203          * configuration registers.
 204          */
 205         tuple.DesiredTuple = CISTPL_CONFIG;
 206         tuple.Attributes = 0;
 207         tuple.TupleData = buf;
 208         tuple.TupleDataMax = sizeof(buf);
 209         tuple.TupleOffset = 0;
 210         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
 211         CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
 212         CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
 213         link->conf.ConfigBase = parse.config.base;
 214         link->conf.Present = parse.config.rmask[0];
 215
 216         /* Configure card */
 217         link->state |= DEV_CONFIG;
 218
 219         /* Look up the current Vcc */
 220         CS_CHECK(GetConfigurationInfo,
 221                  pcmcia_get_configuration_info(handle, &conf));
 222         link->conf.Vcc = conf.Vcc;
 223
 224         /*
 225          * In this loop, we scan the CIS for configuration table
 226          * entries, each of which describes a valid card
 227          * configuration, including voltage, IO window, memory window,
 228          * and interrupt settings.
 229          *
 230          * We make no assumptions about the card to be configured: we
 231          * use just the information available in the CIS.  In an ideal
 232          * world, this would work for any PCMCIA card, but it requires
 233          * a complete and accurate CIS.  In practice, a driver usually
 234          * "knows" most of these things without consulting the CIS,
 235          * and most client drivers will only use the CIS to fill in
 236          * implementation-defined details.
 237          */
 238         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 239         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
 240         while (1) {
 241                 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
 242                 cistpl_cftable_entry_t dflt = { .index = 0 };
 243
 244                 if ( (pcmcia_get_tuple_data(handle, &tuple) != 0)
 245                     || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0))
 246                         goto next_entry;
 247
 248                 if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 249                         dflt = *cfg;
 250                 if (cfg->index == 0)
 251                         goto next_entry;
 252                 link->conf.ConfigIndex = cfg->index;
 253
 254                 /* Does this card need audio output? */
 255                 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 256                         link->conf.Attributes |= CONF_ENABLE_SPKR;
 257                         link->conf.Status = CCSR_AUDIO_ENA;
 258                 }
 259
 260                 /* Use power settings for Vcc and Vpp if present */
 261                 /* Note that the CIS values need to be rescaled */
 262                 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 263                         if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 264                                 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n",  conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 265                                 if (!ignore_cis_vcc)
 266                                         goto next_entry;
 267                         }
 268                 } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
 269                         if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
 270                                 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n",  conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
 271                                 if(!ignore_cis_vcc)
 272                                         goto next_entry;
 273                         }
 274                 }
 275
 276                 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 277                         link->conf.Vpp1 = link->conf.Vpp2 =
 278                             cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 279                 else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
 280                         link->conf.Vpp1 = link->conf.Vpp2 =
 281                             dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 282
 283                 /* Do we need to allocate an interrupt? */
 284                 link->conf.Attributes |= CONF_ENABLE_IRQ;
 285
 286                 /* IO window settings */
 287                 link->io.NumPorts1 = link->io.NumPorts2 = 0;
 288                 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
 289                         cistpl_io_t *io =
 290                             (cfg->io.nwin) ? &cfg->io : &dflt.io;
 291                         link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 292                         if (!(io->flags & CISTPL_IO_8BIT))
 293                                 link->io.Attributes1 =
 294                                     IO_DATA_PATH_WIDTH_16;
 295                         if (!(io->flags & CISTPL_IO_16BIT))
 296                                 link->io.Attributes1 =
 297                                     IO_DATA_PATH_WIDTH_8;
 298                         link->io.IOAddrLines =
 299                             io->flags & CISTPL_IO_LINES_MASK;
 300                         link->io.BasePort1 = io->win[0].base;
 301                         link->io.NumPorts1 = io->win[0].len;
 302                         if (io->nwin > 1) {
 303                                 link->io.Attributes2 =
 304                                     link->io.Attributes1;
 305                                 link->io.BasePort2 = io->win[1].base;
 306                                 link->io.NumPorts2 = io->win[1].len;
 307                         }
 308
 309                         /* This reserves IO space but doesn't actually enable it */
 310                         if (pcmcia_request_io(link->handle, &link->io) != 0)
 311                                 goto next_entry;
 312                 }
 313
 314
 315                 /* If we got this far, we're cool! */
 316
 317                 break;
 318
 319         next_entry:
 320                 if (link->io.NumPorts1)
 321                         pcmcia_release_io(link->handle, &link->io);
 322                 last_ret = pcmcia_get_next_tuple(handle, &tuple);
 323                 if (last_ret  == CS_NO_MORE_ITEMS) {
 324                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
 325                                "CIS configuration.  Maybe you need the "
 326                                "ignore_cis_vcc=1 parameter.\n");
 327                         goto cs_failed;
 328                 }
 329         }
 330
 331         /*
 332          * Allocate an interrupt line.  Note that this does not assign
 333          * a handler to the interrupt, unless the 'Handler' member of
 334          * the irq structure is initialized.
 335          */
 336         CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
 337
 338         /* We initialize the hermes structure before completing PCMCIA
 339          * configuration just in case the interrupt handler gets
 340          * called. */
 341         mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 342         if (!mem)
 343                 goto cs_failed;
 344
 345         hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 346
 347         /*
 348          * This actually configures the PCMCIA socket -- setting up
 349          * the I/O windows and the interrupt mapping, and putting the
 350          * card and host interface into "Memory and IO" mode.
 351          */
 352         CS_CHECK(RequestConfiguration,
 353                  pcmcia_request_configuration(link->handle, &link->conf));
 354
 355         /* Ok, we have the configuration, prepare to register the netdev */
 356         dev->base_addr = link->io.BasePort1;
 357         dev->irq = link->irq.AssignedIRQ;
 358         SET_MODULE_OWNER(dev);
 359         card->node.major = card->node.minor = 0;
 360
 361         SET_NETDEV_DEV(dev, &handle_to_dev(handle));
 362         /* Tell the stack we exist */
 363         if (register_netdev(dev) != 0) {
 364                 printk(KERN_ERR PFX "register_netdev() failed\n");
 365                 goto failed;
 366         }
 367
 368         /* At this point, the dev_node_t structure(s) needs to be
 369          * initialized and arranged in a linked list at link->dev. */
 370         strcpy(card->node.dev_name, dev->name);
 371         link->dev = &card->node; /* link->dev being non-NULL is also
 372                                     used to indicate that the
 373                                     net_device has been registered */
 374         link->state &= ~DEV_CONFIG_PENDING;
 375
 376         /* Finally, report what we've done */
 377         printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
 378                dev->name, link->conf.ConfigIndex,
 379                link->conf.Vcc / 10, link->conf.Vcc % 10);
 380         if (link->conf.Vpp1)
 381                 printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
 382                        link->conf.Vpp1 % 10);
 383         printk(", irq %d", link->irq.AssignedIRQ);
 384         if (link->io.NumPorts1)
 385                 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 386                        link->io.BasePort1 + link->io.NumPorts1 - 1);
 387         if (link->io.NumPorts2)
 388                 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 389                        link->io.BasePort2 + link->io.NumPorts2 - 1);
 390         printk("\n");
 391
 392         return;
 393
 394  cs_failed:
 395         cs_error(link->handle, last_fn, last_ret);
 396
 397  failed:
 398         orinoco_cs_release(link);
 399 }                               /* orinoco_cs_config */
 400
 401 /*
 402  * After a card is removed, orinoco_cs_release() will unregister the
 403  * device, and release the PCMCIA configuration.  If the device is
 404  * still open, this will be postponed until it is closed.
 405  */
 406 static void
 407 orinoco_cs_release(dev_link_t *link)
 408 {
 409         struct net_device *dev = link->priv;
 410         struct orinoco_private *priv = netdev_priv(dev);
 411         unsigned long flags;
 412
 413         /* We're committed to taking the device away now, so mark the
 414          * hardware as unavailable */
 415         spin_lock_irqsave(&priv->lock, flags);
 416         priv->hw_unavailable++;
 417         spin_unlock_irqrestore(&priv->lock, flags);
 418
 419         /* Don't bother checking to see if these succeed or not */
 420         pcmcia_release_configuration(link->handle);
 421         if (link->io.NumPorts1)
 422                 pcmcia_release_io(link->handle, &link->io);
 423         if (link->irq.AssignedIRQ)
 424                 pcmcia_release_irq(link->handle, &link->irq);
 425         link->state &= ~DEV_CONFIG;
 426         if (priv->hw.iobase)
 427                 ioport_unmap(priv->hw.iobase);
 428 }                               /* orinoco_cs_release */
 429
 430 static int orinoco_cs_suspend(struct pcmcia_device *p_dev)
 431 {
 432         dev_link_t *link = dev_to_instance(p_dev);
 433         struct net_device *dev = link->priv;
 434         struct orinoco_private *priv = netdev_priv(dev);
 435         struct orinoco_pccard *card = priv->card;
 436         int err = 0;
 437         unsigned long flags;
 438
 439         link->state |= DEV_SUSPEND;
 440         if (link->state & DEV_CONFIG) {
 441                 /* This is probably racy, but I can't think of
 442                    a better way, short of rewriting the PCMCIA
 443                    layer to not suck :-( */
 444                 if (! test_bit(0, &card->hard_reset_in_progress)) {
 445                         spin_lock_irqsave(&priv->lock, flags);
 446
 447                         err = __orinoco_down(dev);
 448                         if (err)
 449                                 printk(KERN_WARNING "%s: Error %d downing interface\n",
 450                                        dev->name, err);
 451
 452                         netif_device_detach(dev);
 453                         priv->hw_unavailable++;
 454
 455                         spin_unlock_irqrestore(&priv->lock, flags);
 456                 }
 457
 458                 pcmcia_release_configuration(link->handle);
 459         }
 460
 461         return 0;
 462 }
 463
 464 static int orinoco_cs_resume(struct pcmcia_device *p_dev)
 465 {
 466         dev_link_t *link = dev_to_instance(p_dev);
 467         struct net_device *dev = link->priv;
 468         struct orinoco_private *priv = netdev_priv(dev);
 469         struct orinoco_pccard *card = priv->card;
 470         int err = 0;
 471         unsigned long flags;
 472
 473         link->state &= ~DEV_SUSPEND;
 474         if (link->state & DEV_CONFIG) {
 475                 /* FIXME: should we double check that this is
 476                  * the same card as we had before */
 477                 pcmcia_request_configuration(link->handle, &link->conf);
 478
 479                 if (! test_bit(0, &card->hard_reset_in_progress)) {
 480                         err = orinoco_reinit_firmware(dev);
 481                         if (err) {
 482                                 printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
 483                                        dev->name, err);
 484                                 return -EIO;
 485                         }
 486
 487                         spin_lock_irqsave(&priv->lock, flags);
 488
 489                         netif_device_attach(dev);
 490                         priv->hw_unavailable--;
 491
 492                         if (priv->open && ! priv->hw_unavailable) {
 493                                 err = __orinoco_up(dev);
 494                                 if (err)
 495                                         printk(KERN_ERR "%s: Error %d restarting card\n",
 496                                                dev->name, err);
 497                         }
 498
 499                         spin_unlock_irqrestore(&priv->lock, flags);
 500                 }
 501         }
 502
 503         return 0;
 504 }
 505
 506
 507 /********************************************************************/
 508 /* Module initialization                                            */
 509 /********************************************************************/
 510
 511 /* Can't be declared "const" or the whole __initdata section will
 512  * become const */
 513 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 514         " (David Gibson <hermes@gibson.dropbear.id.au>, "
 515         "Pavel Roskin <proski@gnu.org>, et al)";
 516
 517 static struct pcmcia_device_id orinoco_cs_ids[] = {
 518         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
 519         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
 520         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
 521         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
 522         PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
 523         PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
 524         PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
 525         PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
 526         PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
 527         PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
 528         PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 529         PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 530         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
 531         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 532         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 533         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
 534         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
 535         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 536         PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 537         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
 538         PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
 539         PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 540         PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
 541         PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
 542         PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
 543         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
 544         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
 545         PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
 546         PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 547         PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 548         PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
 549         PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
 550         PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
 551         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
 552         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
 553         PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
 554         PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
 555         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 556         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
 557         PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
 558         PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
 559         PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
 560         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 561         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 562         PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
 563         PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
 564         PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
 565         PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
 566         PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
 567         PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
 568         PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
 569         PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
 570         PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
 571         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 572         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 573         PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
 574         PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
 575         PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 576         PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
 577         PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
 578         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
 579         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
 580         PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
 581         PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
 582         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 583         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
 584         PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
 585         PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
 586         PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
 587         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
 588         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 589         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
 590         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
 591         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
 592         PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
 593         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 594         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 595         PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 596         PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
 597         PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
 598         PCMCIA_DEVICE_NULL,
 599 };
 600 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
 601
 602 static struct pcmcia_driver orinoco_driver = {
 603         .owner          = THIS_MODULE,
 604         .drv            = {
 605                 .name   = DRIVER_NAME,
 606         },
 607         .probe          = orinoco_cs_attach,
 608         .remove         = orinoco_cs_detach,
 609         .id_table       = orinoco_cs_ids,
 610         .suspend        = orinoco_cs_suspend,
 611         .resume         = orinoco_cs_resume,
 612 };
 613
 614 static int __init
 615 init_orinoco_cs(void)
 616 {
 617         printk(KERN_DEBUG "%s\n", version);
 618
 619         return pcmcia_register_driver(&orinoco_driver);
 620 }
 621
 622 static void __exit
 623 exit_orinoco_cs(void)
 624 {
 625         pcmcia_unregister_driver(&orinoco_driver);
 626 }
 627
 628 module_init(init_orinoco_cs);
 629 module_exit(exit_orinoco_cs);